Merge pull request #1061 from kernelkit/update-changelog-v25.05.1

Update changelog for Infix v25.05.1

.github/workflows/build.yml

@@ -13,7 +13,11 @@ on:
         required: false
         default: true
         type: boolean
-
+      parallell:
+        description: 'Massive parallel build of each image'
+        required: false
+        default: true
+        type: boolean
 jobs:
   build:
     name: Build Infix ${{ matrix.target }}
@@ -71,6 +75,7 @@ jobs:
           echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
           echo "flv=$flavor"              >> $GITHUB_OUTPUT
           echo "Building target ${target}${flavor}_defconfig"
+
       - name: Restore Cache of dl/
         uses: actions/cache@v4
         with:
@@ -96,10 +101,24 @@ jobs:
         run: |
           make test-unit
 
+      - name: Prepare parallel build
+        id: parallel
+        run: |
+
+          if [ "${{ ((github.event.inputs.parallel == 'true' && github.event_name == 'workflow_dispatch') || (github.ref_name != 'main' && github.event_name != 'workflow_dispatch')) }}" == "true" ]; then
+             echo "BR2_PER_PACKAGE_DIRECTORIES=y" >> output/.config
+             MAKE="make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
+             echo "Building in parallel with -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
+          else
+             echo "Disabling parallel build"
+             MAKE="make"
+          fi
+          echo "MAKE=$MAKE" >> $GITHUB_OUTPUT
+
       - name: Build ${{ matrix.target }}${{ steps.vars.outputs.flv }}
         run: |
           echo "Building ${{ matrix.target }}${{ steps.vars.outputs.flv }}_defconfig ..."
-          make
+          eval "${{ steps.parallel.outputs.MAKE }}"
 
       - name:  Check SBOM from Build
         run: |

README.md

@@ -93,12 +93,14 @@ The [following boards](board/aarch64/README.md) are fully supported:
  - Marvell CN9130 CRB
  - Marvell EspressoBIN
  - Microchip SparX-5i PCB135 (eMMC)
- - StarFive VisionFive2
+ - Raspberry Pi 4B
  - NanoPi R2S
 
-An x86_64 build is also available, primarily intended for development
-and testing, but can also be used for evaluation and demo purposes.  For
-more information, see: [Infix in Virtual Environments](doc/virtual.md).
+Additionally, StarFive VisionFive2, a RISC-V based two-port router, and
+an x86_64 build is also available.  The latter is primarily intended for
+development and testing, but can also be used for evaluation and demo
+purposes.  For more information, see: [Infix in Virtual
+Environments](doc/virtual.md).
 
 > See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
 > page for our pre-built images.  The *[Latest Build][]* has bleeding

board/aarch64/rpi/bcm2711-rpi-4-b-dts.patch

@@ -0,0 +1,14 @@
+--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts	2025-04-28 00:13:06.880003668 +0200
++++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts	2025-04-28 00:14:17.708941263 +0200
+@@ -14,6 +14,11 @@
+ 	chosen {
+ 		/* 8250 auxiliary UART instead of pl011 */
+ 		stdout-path = "serial1:115200n8";
++
++		infix {
++			/* Default admin user password: 'admin' */
++			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
++		};
+ 	};
+ 
+ 	cam1_reg: regulator-cam1 {

board/aarch64/rpi/cmdline.txt

@@ -0,0 +1 @@
+root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200

board/aarch64/rpi/config.txt

@@ -0,0 +1,41 @@
+# Please note that this is only a sample, we recommend you to change it to fit
+# your needs.
+# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
+# See http://buildroot.org/manual.html#rootfs-custom
+# and http://elinux.org/RPiconfig for a description of config.txt syntax
+
+start_file=start4.elf
+fixup_file=fixup4.dat
+
+kernel=u-boot.bin
+
+device_tree=bcm2711-rpi-4-b.dtb
+dtoverlay=rpi-env
+dtoverlay=infix-key
+
+# To use an external initramfs file
+#initramfs rootfs.cpio.gz
+
+# Disable overscan assuming the display supports displaying the full resolution
+# If the text shown on the screen disappears off the edge, comment this out
+disable_overscan=1
+
+# How much memory in MB to assign to the GPU on Pi models having
+# 256, 512 or 1024 MB total memory
+gpu_mem_256=100
+gpu_mem_512=100
+gpu_mem_1024=100
+
+# Enable UART0 for serial console on ttyAMA0
+enable_uart=1
+force_turbo=1
+#dtoverlay=miniuart-bt
+
+# Run as fast as firmware / board allows
+arm_boost=1
+
+# enable 64bits support
+arm_64bit=1
+
+# Enable early debugging info
+uart_2ndstage=1

board/aarch64/rpi/genimage.cfg.in

@@ -0,0 +1,71 @@
+image boot.vfat {
+	vfat {
+		files = {
+#BOOT_FILES#
+		}
+	}
+
+	size = 32M
+}
+
+image cfg.ext4 {
+	empty = true
+	temporary = true
+	size = 16M
+
+	ext4 {
+		label = "cfg"
+	}
+}
+
+image var.ext4 {
+	empty = true
+	temporary = true
+	size = 512M
+
+	ext4 {
+		label = "var"
+		use-mke2fs = true
+	}
+}
+
+image sdcard.img {
+	hdimage {
+		partition-table-type = "gpt"
+	}
+
+	partition boot {
+		partition-type-uuid = EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition aux {
+		partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
+		image = "aux.ext4"
+	}
+
+	partition primary {
+		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+		bootable = true
+		size = 200M
+		image = "rootfs.squashfs"
+	}
+
+	partition secondary {
+		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
+		bootable = true
+		size = 200M
+		image = "rootfs.squashfs"
+	}
+
+	partition cfg {
+		partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
+		image = "cfg.ext4"
+	}
+
+	partition var {
+		partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
+		image = "var.ext4"
+	}
+}

board/aarch64/rpi/post-build.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+# Armbian firmware installs to /lib/firmware but driver wants the
+# file(s) in /lib/firmware/brcm/
+if [ -f "${TARGET_DIR}/lib/firmware/BCM4345C0.hcd" ]; then
+    mv "${TARGET_DIR}/lib/firmware/BCM4345C0.hcd" "${TARGET_DIR}/lib/firmware/brcm/"
+fi

board/aarch64/rpi/post-image.sh

@@ -0,0 +1,43 @@
+#!/bin/sh
+set -e
+
+BOARD_DIR=$(dirname "$0")
+GENIMAGE_CFG="${BUILD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+# Device trees are installed for distro boot (syslinux.conf), but on RPi
+# we need them for the SPL, which feeds the TPL (U-Boot) for use instead
+# of the (built-in) control DT other platforms use.
+find "${TARGET_DIR}/boot" -type f -name '*.dtb' -exec cp '{}' "${BINARIES_DIR}/" \;
+
+# We've asked U-Boot previously to build overlays for us: Infix signing
+# key and our ixboot scripts.  Make sure here they are installed in the
+# proper directory so genimage can create the DOS partition the SPL
+# reads config.txt from.
+find "${BINARIES_DIR}" -type f -name '*.dtbo' -exec mv '{}' "${BINARIES_DIR}/rpi-firmware/overlays/" \;
+
+# Create FILES array for the genimage.cfg generation
+FILES=""
+for f in "${BINARIES_DIR}"/*.dtb "${BINARIES_DIR}"/rpi-firmware/*; do
+    case "$f" in
+        *~|*.bak) continue ;;
+    esac
+    FILES="${FILES}\t\t\t\"${f#"${BINARIES_DIR}/"}\",\n"
+done
+
+KERNEL=$(sed -n 's/^kernel=//p' "${BINARIES_DIR}/rpi-firmware/config.txt")
+FILES="${FILES}\t\t\t\"${KERNEL}\""
+
+sed "s|#BOOT_FILES#|${FILES}|" "${BOARD_DIR}/genimage.cfg.in" > "${GENIMAGE_CFG}"
+
+ROOTPATH_TMP=$(mktemp -d)
+trap 'rm -rf \"$ROOTPATH_TMP\"' EXIT
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage					\
+    --rootpath   "${ROOTPATH_TMP}"		\
+    --tmppath    "${GENIMAGE_TMP}"		\
+    --inputpath  "${BINARIES_DIR}"		\
+    --outputpath "${BINARIES_DIR}"		\
+    --config     "${GENIMAGE_CFG}"

board/aarch64/rpi/rootfs/boot/syslinux/syslinux.conf

@@ -0,0 +1,16 @@
+default rpi4b
+menu title Boot Menu
+prompt 1
+timeout 30
+
+label rpi4b
+        menu label Infix on Raspberry Pi 4B
+	kernel /boot/Image
+	devicetree /boot/broadcom/bcm2711-rpi-4-b.dtb
+	append ${bootargs_root} 8250.nr_uarts=1 console=ttyS0,115200 ${bootargs_log} -- ${bootargs_user}
+
+label rpi400
+	menu label Infix on Raspberry Pi 400
+	kernel /boot/Image
+	devicetree /boot/broadcom/bcm2711-rpi-400.dtb
+	append ${bootargs_root} 8250.nr_uarts=1 console=ttyS0,115200 ${bootargs_log} -- ${bootargs_user}

board/aarch64/rpi/rootfs/etc/factory-config.cfg

@@ -0,0 +1,193 @@
+{
+  "ieee802-dot1ab-lldp:lldp": {
+    "infix-lldp:enabled": true
+  },
+  "ietf-interfaces:interfaces": {
+    "interface": [
+      {
+        "name": "lo",
+        "type": "infix-if-type:loopback",
+        "ietf-ip:ipv4": {
+          "address": [
+            {
+              "ip": "127.0.0.1",
+              "prefix-length": 8
+            }
+          ]
+        },
+        "ietf-ip:ipv6": {
+          "address": [
+            {
+              "ip": "::1",
+              "prefix-length": 128
+            }
+          ]
+        }
+      },
+      {
+        "name": "eth0",
+        "type": "infix-if-type:ethernet"
+      }
+    ]
+  },
+  "ietf-keystore:keystore": {
+    "asymmetric-keys": {
+      "asymmetric-key": [
+        {
+          "name": "genkey",
+          "public-key-format": "ietf-crypto-types:ssh-public-key-format",
+          "public-key": "",
+          "private-key-format": "ietf-crypto-types:rsa-private-key-format",
+          "cleartext-private-key": "",
+          "certificates": {}
+        }
+      ]
+    }
+  },
+  "ietf-netconf-acm:nacm": {
+    "enable-nacm": true,
+    "groups": {
+      "group": [
+        {
+          "name": "admin",
+          "user-name": [
+            "admin"
+          ]
+        }
+      ]
+    },
+    "rule-list": [
+      {
+        "name": "admin-acl",
+        "group": [
+          "admin"
+        ],
+        "rule": [
+          {
+            "name": "permit-all",
+            "module-name": "*",
+            "access-operations": "*",
+            "action": "permit",
+            "comment": "Allow 'admin' group complete access to all operations and data."
+          }
+        ]
+      },
+      {
+        "name": "default-deny-all",
+        "group": [
+          "*"
+        ],
+        "rule": [
+          {
+            "name":  "deny-password-read",
+            "module-name": "ietf-system",
+            "path": "/ietf-system:system/authentication/user/password",
+            "access-operations": "*",
+            "action": "deny"
+          }
+        ]
+      }
+    ]
+  },
+  "ietf-netconf-server:netconf-server": {
+    "listen": {
+      "endpoints": {
+        "endpoint": [
+          {
+            "name": "default-ssh",
+            "ssh": {
+              "tcp-server-parameters": {
+                "local-address": "::"
+              },
+              "ssh-server-parameters": {
+                "server-identity": {
+                  "host-key": [
+                    {
+                      "name": "default-key",
+                      "public-key": {
+                        "central-keystore-reference": "genkey"
+                      }
+                    }
+                  ]
+                }
+              }
+            }
+          }
+        ]
+      }
+    }
+  },
+  "ietf-system:system": {
+    "hostname": "rpi4",
+    "ntp": {
+      "enabled": true,
+      "server": [
+        {
+          "name": "ntp.org",
+          "udp": {
+            "address": "pool.ntp.org"
+          },
+	  "iburst": true
+        }
+      ]
+    },
+    "authentication": {
+      "user": [
+        {
+          "name": "admin",
+          "password": "$factory$",
+          "infix-system:shell": "bash"
+        }
+      ]
+    },
+    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCAtLSBhIE5ldHdvcmsgT3BlcmF0aW5nIFN5c3RlbQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQuZ2l0aHViLmlvCictJy0tLSctJwo="
+  },
+  "infix-dhcp-client:dhcp-client": {
+    "client-if": [
+      {
+        "if-name": "eth0",
+        "option": [
+          {
+            "id": "netmask"
+          },
+          {
+            "id": "broadcast"
+          },
+          {
+            "id": "router"
+          },
+          {
+            "id": "domain"
+          },
+          {
+            "id": "hostname"
+          },
+          {
+            "id": "dns-server"
+          },
+          {
+            "id": "ntp-server"
+          }
+        ]
+      }
+    ]
+  },
+  "infix-meta:meta": {
+    "infix-meta:version": "1.2"
+  },
+  "infix-services:mdns": {
+    "enabled": true
+  },
+  "infix-services:web": {
+    "enabled": true,
+    "console": {
+      "enabled": true
+    },
+    "netbrowse": {
+      "enabled": true
+    },
+    "restconf": {
+      "enabled": true
+    }
+  }
+}

board/aarch64/rpi/rootfs/etc/product/interface-quirks.json

@@ -0,0 +1,5 @@
+{
+    "eth0": {
+	"phy-detached-when-down": true
+    }
+}

board/aarch64/rpi/rootfs/etc/watchdogd.conf

@@ -0,0 +1,6 @@
+# Broadcom BCM2835 Watchdog timer
+device /dev/watchdog0 {
+    timeout    = 60
+    interval   = 5
+    safe-exit  = true
+}

board/aarch64/rpi/uboot/extras.config

@@ -0,0 +1,3 @@
+# CONFIG_MMC_PCI is not set
+CONFIG_OF_OVERLAY_LIST="rpi-env infix-key"
+# CONFIG_ENV_IS_IN_FAT is not set

board/aarch64/rpi/uboot/rpi-env.dtso

@@ -0,0 +1,27 @@
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	config {
+		environment {
+			vendor = "infix";
+			preboot = "run ixpreboot";
+			ixbootdelay = "0.5";
+			bootdelay = "-2";
+			bootmenu_delay = "10";
+			boot_targets = "mmc1";
+			ethprime = "eth0";
+			bootcmd = "run ixboot";
+
+			ixpreboot     = /incbin/("scripts/ixpreboot.sh");
+			ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
+			ixbtn-factory = "echo \"No button available, use bootmenu\"";
+			ixfactory     = /incbin/("scripts/ixfactory.sh");
+
+			ixboot      = /incbin/("scripts/ixboot.sh");
+			ixbootslot  = /incbin/("scripts/ixbootslot.sh");
+			ixprepblk   = /incbin/("scripts/ixprepblk.sh");
+			ixprepdhcp  = /incbin/("scripts/ixprepdhcp.sh");
+		};
+	};
+};

board/common/rootfs/usr/sbin/container

@@ -550,7 +550,7 @@ while [ "$1" != "" ]; do
 	    ;;
 	-m | --mount)
 	    shift
-	    mount="--mount=$1"
+	    mount="$mount --mount=$1"
 	    ;;
 	--manual)
 	    manual=true
@@ -696,7 +696,7 @@ case $cmd in
 	    oci)
 		find $BUILTIN $DOWNLOADS -type f 2>/dev/null
 		;;
-	    *)		
+	    *)
 		podman ps $all --format "{{.Names}}"
 		;;
 	esac

board/common/uboot/uboot.mk

@@ -17,14 +17,23 @@ endef
 # U-Boot build tree. This will then be built in to the final U-Boot
 # image's control DT via the CONFIG_DEVICE_TREE_INCLUDES option (see
 # extras.config).
+#
+# Some platforms, most notably Raspberry Pi, load the device tree
+# from the SPL, effectively overriding the built-in control DT.
+# For that we bundle an overlay that can be included instead.
 define UBOOT_PRE_BUILD_INSTALL_KEY
-	$(HOST_DIR)/bin/dtc <(echo '/dts-v1/; / { signature {}; };') >$(@D)/infix-key.dtb
+	$(HOST_DIR)/bin/dtc -a 1024 <(echo '/dts-v1/; / { signature {}; };') \
+		>$(@D)/infix-key.dtb
 	$(foreach key, \
 		$(call qstrip,$(TRUSTED_KEYS_DEVELOPMENT_PATH)) $(call qstrip,$(TRUSTED_KEYS_EXTRA_PATH)),\
 		$(call uboot-add-pubkey,$(key),$(@D)/infix-key.dtb))
 	$(HOST_DIR)/bin/dtc -I dtb -O dts \
 		<$(@D)/infix-key.dtb \
-	| sed -e 's:/dts-v[0-9]\+/;::' >$(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtsi
+		| sed -e 's:/dts-v[0-9]\+/;::' \
+		| tee $(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtsi \
+		| sed -e '1i\/dts-v1/;\n/plugin/;\n' -e '/^$$/d' -e 's:/ {:\&{/} {:' \
+		>$(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtso
+
 	rm $(@D)/infix-key.dtb
 endef
 UBOOT_PRE_BUILD_HOOKS += UBOOT_PRE_BUILD_INSTALL_KEY

configs/aarch64_defconfig

@@ -27,7 +27,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.25"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/aarch64_minimal_defconfig

@@ -27,7 +27,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.25"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/r2s_defconfig

@@ -29,7 +29,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image
 BR2_ROOTFS_POST_SCRIPT_ARGS="-c $(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/r2s/genimage.cfg"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.25"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
 BR2_LINUX_KERNEL_PATCH="$(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/r2s/rk3328-nanopi-r2s-dts.patch"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/r2s/linux_defconfig"

configs/rpi4_defconfig

@@ -0,0 +1,201 @@
+BR2_aarch64=y
+BR2_cortex_a72=y
+BR2_ARM_FPU_VFPV4=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
+BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
+BR2_DL_DIR="${BR2_EXTERNAL_INFIX_PATH}/dl"
+BR2_CCACHE=y
+BR2_CCACHE_DIR="${BR2_EXTERNAL_INFIX_PATH}/.ccache"
+BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches ${BR2_EXTERNAL_INFIX_PATH}/patches"
+BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
+BR2_TARGET_GENERIC_HOSTNAME="infix"
+BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
+BR2_INIT_FINIT=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
+BR2_ROOTFS_MERGED_USR=y
+# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
+BR2_SYSTEM_BIN_SH_BASH=y
+BR2_TARGET_GENERIC_GETTY_PORT="@console"
+BR2_TARGET_GENERIC_GETTY_TERM="xterm"
+BR2_SYSTEM_DHCP="eth0"
+BR2_SYSTEM_DEFAULT_PATH="/bin:/sbin:/usr/bin:/usr/sbin"
+BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA C.UTF-8"
+BR2_GENERATE_LOCALE="en_US en_CA C.UTF-8"
+BR2_TARGET_TZ_INFO=y
+BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/rootfs"
+BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/post-image.sh"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
+BR2_LINUX_KERNEL_PATCH="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/bcm2711-rpi-4-b-dts.patch"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/bcm2711_defconfig"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400"
+BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_INFIX_PATH)/board/common/busybox_defconfig"
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_STRACE=y
+BR2_PACKAGE_STRESS_NG=y
+BR2_PACKAGE_JQ=y
+BR2_PACKAGE_E2FSPROGS=y
+BR2_PACKAGE_ARMBIAN_FIRMWARE=y
+BR2_PACKAGE_ARMBIAN_FIRMWARE_AP6255=y
+BR2_PACKAGE_BRCMFMAC_SDIO_FIRMWARE_RPI=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM4366B1=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM4366C0=y
+BR2_PACKAGE_RPI_FIRMWARE=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
+BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_X=y
+BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/config.txt"
+BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/cmdline.txt"
+BR2_PACKAGE_DBUS_CXX=y
+BR2_PACKAGE_DBUS_GLIB=y
+BR2_PACKAGE_DBUS_TRIGGERD=y
+BR2_PACKAGE_EUDEV_RULES_GEN=y
+# BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
+BR2_PACKAGE_EVEMU=y
+BR2_PACKAGE_EVTEST=y
+BR2_PACKAGE_GPTFDISK=y
+BR2_PACKAGE_GPTFDISK_SGDISK=y
+BR2_PACKAGE_INPUT_EVENT_DAEMON=y
+BR2_PACKAGE_MDIO_TOOLS=y
+BR2_PACKAGE_RNG_TOOLS=y
+BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
+BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
+BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
+BR2_PACKAGE_UBOOT_TOOLS_MKENVIMAGE=y
+BR2_PACKAGE_PYTHON3=y
+BR2_PACKAGE_PYTHON_GUNICORN=y
+BR2_PACKAGE_LIBSSH_OPENSSL=y
+BR2_PACKAGE_LIBSSH2=y
+BR2_PACKAGE_LIBSSH2_OPENSSL=y
+BR2_PACKAGE_LIBOPENSSL_BIN=y
+BR2_PACKAGE_LIBINPUT=y
+BR2_PACKAGE_LIBCURL_CURL=y
+BR2_PACKAGE_NETOPEER2_CLI=y
+BR2_PACKAGE_NSS_MDNS=y
+BR2_PACKAGE_LINUX_PAM=y
+BR2_PACKAGE_LIBPAM_RADIUS_AUTH=y
+BR2_PACKAGE_ONIGURUMA=y
+BR2_PACKAGE_AVAHI_DAEMON=y
+BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
+BR2_PACKAGE_CHRONY=y
+BR2_PACKAGE_CONNTRACK_TOOLS=y
+BR2_PACKAGE_DNSMASQ=y
+BR2_PACKAGE_ETHTOOL=y
+BR2_PACKAGE_FPING=y
+BR2_PACKAGE_FRR=y
+BR2_PACKAGE_HOSTAPD=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_IPROUTE2=y
+BR2_PACKAGE_IPTABLES_NFTABLES=y
+BR2_PACKAGE_IPUTILS=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
+BR2_PACKAGE_NETCALC=y
+BR2_PACKAGE_NETCAT_OPENBSD=y
+BR2_PACKAGE_NETSNMP=y
+BR2_PACKAGE_NFTABLES=y
+BR2_PACKAGE_NGINX=y
+BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_V2_MODULE=y
+BR2_PACKAGE_NMAP=y
+BR2_PACKAGE_NMAP_NCAT=y
+BR2_PACKAGE_NMAP_NMAP=y
+BR2_PACKAGE_NMAP_NPING=y
+BR2_PACKAGE_OPENRESOLV=y
+BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_SOCAT=y
+BR2_PACKAGE_TCPDUMP=y
+BR2_PACKAGE_TRACEROUTE=y
+BR2_PACKAGE_ULOGD=y
+BR2_PACKAGE_WHOIS=y
+BR2_PACKAGE_WIRELESS_REGDB=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_BASH_COMPLETION=y
+BR2_PACKAGE_SUDO=y
+BR2_PACKAGE_TTYD=y
+BR2_PACKAGE_GETENT=y
+BR2_PACKAGE_HTOP=y
+BR2_PACKAGE_IRQBALANCE=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_PWGEN=y
+BR2_PACKAGE_RAUC=y
+BR2_PACKAGE_RAUC_DBUS=y
+BR2_PACKAGE_RAUC_GPT=y
+BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
+BR2_PACKAGE_SYSKLOGD=y
+BR2_PACKAGE_SYSKLOGD_LOGGER=y
+BR2_PACKAGE_WATCHDOGD=y
+BR2_PACKAGE_LESS=y
+BR2_PACKAGE_MG=y
+BR2_PACKAGE_NANO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_arm64"
+BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_INFIX_PATH)/board/common/uboot/extras.config $(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/rpi/uboot/extras.config"
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="arch/arm/dts/infix-key.dtbo arch/arm/dts/rpi-env.dtbo"
+BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="$(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/rpi/uboot/rpi-env.dtso"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_E2FSPROGS=y
+BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
+BR2_PACKAGE_HOST_GENEXT2FS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_KMOD_XZ=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_RAUC=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
+INFIX_VENDOR_HOME="https://github.com/kernelkit"
+INFIX_IMAGE_ID="${INFIX_ID}-rpi4"
+INFIX_DESC="Infix is a Network Operating System based on Linux.  It can be set up both as a switch, with offloading using switchdev, and a router with firewalling."
+INFIX_HOME="https://github.com/kernelkit/infix/"
+INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
+INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
+BR2_PACKAGE_CONFD=y
+BR2_PACKAGE_GENCERT=y
+BR2_PACKAGE_STATD=y
+BR2_PACKAGE_FACTORY=y
+BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
+BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
+BR2_PACKAGE_FINIT_PLUGIN_MODULES_LOAD=y
+BR2_PACKAGE_FINIT_PLUGIN_RTC=y
+BR2_PACKAGE_FINIT_RTC_DATE="2024-11-04 10:54:00"
+BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
+BR2_PACKAGE_FINIT_PLUGIN_TTY=y
+BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
+BR2_PACKAGE_IITO=y
+BR2_PACKAGE_KEYACK=y
+BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
+BR2_PACKAGE_LANDING=y
+BR2_PACKAGE_LOWDOWN=y
+BR2_PACKAGE_MCD=y
+BR2_PACKAGE_MDNS_ALIAS=y
+BR2_PACKAGE_NETBROWSE=y
+BR2_PACKAGE_PODMAN=y
+BR2_PACKAGE_PODMAN_DRIVER_BTRFS=y
+BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
+BR2_PACKAGE_PODMAN_DRIVER_VFS=y
+BR2_PACKAGE_SHOW=y
+BR2_PACKAGE_TETRIS=y
+BR2_PACKAGE_ROUSETTE=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
+BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
+TRUSTED_KEYS=y
+TRUSTED_KEYS_DEVELOPMENT=y
+SDCARD_AUX=y

configs/x86_64_defconfig

@@ -26,7 +26,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INF
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.25"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

configs/x86_64_minimal_defconfig

@@ -27,7 +27,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INF
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.25"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.32"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y

doc/ChangeLog.md

@@ -3,6 +3,37 @@ Change Log
 
 All notable changes to the project are documented in this file.
 
+[v25.05.1][] - 2025-06-12
+-------------------------
+
+### Changes
+- Upgrade Linux kernel to 6.12.32 (LTS)
+
+### Fixes
+- Fix #1060: Restore of missing CLI commands, regression in Infix v25.05.0
+
+[v25.05.0][] - 2025-05-27
+-------------------------
+
+### Changes
+- Upgrade Buildroot to 2025.02.3 (LTS)
+- Upgrade Linux kernel to 6.12.30 (LTS)
+- Upgrade libyang to 3.12.2
+- Upgrade sysrepo to 3.6.11
+- Upgrade netopeer2 (NETCONF) to 2.4.1
+- New hardware support: Raspberry Pi 4B (aarch64)
+- Add documentation on Infix upgrading and downgrading, issue #1009
+- Add HDMI and USB support for iMX8MP-evk
+- Enforced strict format for LLDP destination MAC address:
+  - Only accepts colon-separated format: `01:80:C2:00:00:0E`
+- Add `show lldp` command to show discovered neighbors per interface.
+- Add configuration support for per-interface LLDP administrative status
+
+### Fixes
+- Fix containers with multiple mounts
+- Correct description for LAG LACP modes
+- Fix #1040: Add `mount` constraint for container config
+
 
 [v25.04.0][] - 2025-04-30
 -------------------------
@@ -114,6 +145,7 @@ All notable changes to the project are documented in this file.
  - Add support for GRE/GRETAP tunnels
  - Add support for STP/RSTP on bridges
  - Add support for VXLAN tunnels
+ - Add support for configuring global LLDP `message-tx-interval`
 
 ### Fixes
 
@@ -1546,7 +1578,9 @@ Supported YANG models in addition to those used by sysrepo and netopeer:
  - N/A
 
 [buildroot]:  https://buildroot.org/
-[UNRELEASED]: https://github.com/kernelkit/infix/compare/v25.04.0...HEAD
+[UNRELEASED]: https://github.com/kernelkit/infix/compare/v25.05.1...HEAD
+[v25.05.1]:   https://github.com/kernelkit/infix/compare/v25.05.0...v25.05.1
+[v25.05.0]:   https://github.com/kernelkit/infix/compare/v25.04.0...v25.05.0
 [v25.04.0]:   https://github.com/kernelkit/infix/compare/v25.03.0...v25.04.0
 [v25.03.0]:   https://github.com/kernelkit/infix/compare/v25.02.0...v25.03.0
 [v25.02.0]:   https://github.com/kernelkit/infix/compare/v25.01.0...v25.02.0

doc/boot.md

@@ -63,7 +63,7 @@ bootloader's validation procedure, user configuration is kept to a
 minimum.  Two settings are available:
 
 - **Boot order**: Since Infix maintains two copies of its software image,
-  and as some bootloaders support netbooting, the order in which boot
+  and as some bootloaders support [netbooting][2], the order in which boot
   sources are considered can be configured. To select the active
   source, use [RAUC][]:
 
@@ -349,5 +349,8 @@ can funtion reasonably well without a persistent `/var`, loosing
 If `var` is not available, Infix will still persist `/var/lib` using
 `cfg` as the backing storage.
 
-[^1]: See [CLI Upgrade](cli/upgrade.md) for information on upgrading
-    via CLI.
+[^1]: See [Upgrading procedures and boot
+    order](system.md#upgrade-procedures-and-boot-order) for
+    information on upgrading via CLI.
+
+[2]: netboot.md

doc/cli/upgrade.md

@@ -39,7 +39,12 @@ The secondary partition (`rootfs.1`) has now been upgraded and will be used as
 the *active* partition on the next boot.  Leaving the primary partition, with
 the version we are currently running, intact in case of trouble.
 
+See [upgrading procedures and boot order][2] for more information on
+    upgrading.
+
 [^1]: It is not possible to upgrade the partition we booted from.  Thankfully
     the underlying "rauc" subsystem keeps track of this.  Hence, to upgrade
     both partitions you must reboot to the new version (to verify it works)
     and then repeat the same command.
+
+[2]: ../system.md#upgrade-procedures-and-boot-order

doc/discovery.md

@@ -46,7 +46,7 @@ admin@infix-c0-ff-ee:~$
 
 ## LLDP
 
-Infix supports LLDP (IEEE 802.1AB).  For a device with factory default
+Infix supports LLDP (IEEE 802.1AB). For a device with factory default
 settings, the link-local IPv6 address can be read from the Management
 Address TLV using *tcpdump* or other sniffing tools[^1]:
 
@@ -131,6 +131,10 @@ tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144
 linux-pc:#
 ```
 
+The following capabilities are available via NETCONF/RESTCONF or the Infix CLI.
+
+### LLDP Enable/Disable
+
 The LLDP service can be disabled using the following commands.
 
 ```
@@ -140,6 +144,59 @@ admin@infix-c0-ff-ee:/config/> leave
 admin@infix-c0-ff-ee:/> 
 ```
 
+To reenable it from the CLI config mode:
+
+```
+admin@test-00-01-00:/config/> set lldp enabled 
+admin@test-00-01-00:/config/> leave
+```
+
+### LLDP Message Transmission Interval
+
+By default, LLDP uses a `message-tx-interval` of 30 seconds, as defined
+by the IEEE standard. Infix allows this value to be customized.
+To change it using the CLI:
+
+```
+admin@test-00-01-00:/config/> set lldp message-tx-interval 1
+admin@test-00-01-00:/config/> leave
+```
+
+### LLDP Administrative Status per Interface
+
+Infix supports configuring the LLDP administrative status on a per-port
+basis. The default mode is `tx-and-rx`, but the following options are 
+also supported:
+
+- `rx-only` – Receive LLDP packets only
+- `tx-only` – Transmit LLDP packets only
+- `disabled` – Disable LLDP on the interface
+
+Example configuration:
+
+```
+admin@test-00-01-00:/config/> set lldp port e8 dest-mac-address 01:80:C2:00:00:0E admin-status disabled
+admin@test-00-01-00:/config/> set lldp port e5 dest-mac-address 01:80:C2:00:00:0E admin-status rx-only 
+admin@test-00-01-00:/config/> set lldp port e6 dest-mac-address 01:80:C2:00:00:0E admin-status tx-only
+admin@test-00-01-00:/config/> leave
+```
+
+> [!NOTE]
+> The destination MAC address must be the standard LLDP multicast 
+> address: `01:80:C2:00:00:0E`.
+
+###  Displaying LLDP Neighbor Information
+
+In CLI mode, Infix also provides a convenient `show lldp` command to
+list LLDP neighbors detected on each interface:
+
+```
+admin@test-00-01-00:/> show lldp 
+INTERFACE       REM-IDX   TIME        CHASSIS-ID          PORT-ID             
+e5              1         902         00:a0:85:00:04:01   00:a0:85:00:04:07   
+e6              3         897         00:a0:85:00:03:01   00:a0:85:00:03:07   
+e8              2         901         00:a0:85:00:02:01   00:a0:85:00:02:05
+```
 
 ## mDNS-SD
 

doc/management.md

@@ -193,3 +193,11 @@ admin@example:/config/web/> edit restconf
 admin@example:/config/web/restconf/> no enabled
 admin@example:/config/web/restconf/>
 ```
+
+# System Upgrade
+
+See [upgrading procedures and boot order][1] for information on
+    upgrading.
+
+
+[1]: system.md#upgrade-procedures-and-boot-order

doc/system.md

@@ -323,7 +323,439 @@ reference ID, stratum, time offsets, frequency, and root delay.
 > The system uses `chronyd` Network Time Protocol (NTP) daemon.  The
 > output shown here is best explained in the [Chrony documentation][4].
 
+## Upgrade procedures and boot order
+
+For resilience purposes, Infix maintains two software
+images referred to as the _primary_ and _secondary_ partition image.
+In addition, some bootloaders support [netbooting][6].
+
+The _boot order_ defines which image is tried first, and is listed
+with the CLI `show software` command. It also shows Infix version
+installed per partition, and which image was used when booting (`STATE
+booted`).
+
+```
+admin@example:/> show software
+BOOT ORDER
+primary secondary net
+
+NAME      STATE     VERSION                DATE
+primary   booted    v25.01.0               2025-04-25T10:15:00+00:00
+secondary inactive  v25.01.0               2025-04-25T10:07:20+00:00
+admin@example:/>
+```
+
+YANG support for upgrading Infix, inspecting and _modifying_ the
+boot-order, is defined in [infix-system-software][5].
+
+
+### Upgrading Infix
+
+Upgrading Infix is done one partition at a time. If the system has
+booted from one partition, an `upgrade` will apply to the other
+(inactive) partition.
+
+1. Download and unpack the release to install. Make the image *pkg*
+   bundle available at some URL[^10]
+2. (Optional) Backup the startup configuration
+3. Assume the unit has booted the `primary` image. Then running the
+   `upgrade` command installs a new image on the `secondary`
+   partition
+4. As part of a successful upgrade, the boot-order is implictly
+   changed to boot the newly installed image
+5. Reboot the unit
+6. The unit now runs the new image. To upgrade the remaining partition
+   (`primary`), run the same upgrade command again, and (optionally)
+   reboot to verify the upgrade
+   
+> [!CAUTION]
+> During boot (step 5), the unit may
+> [migrate](#configuration-migration) the startup configuration for
+> any syntax changes.  It is therefore important that you make sure to
+> upgrade the other partition as well after reboot, of course after
+> having verified your setup.
+
+The CLI example below shows steps 2-5.
+
+*Backup startup configuration:* It is recommended to backup the
+startup configuration before performing an upgrade. The backup is
+useful if the upgrade fails, and makes a later
+[downgrade](#downgrading-infix) smoother to conduct.
+
+```
+admin@example:/> dir /cfg
+/cfg directory
+backup/             ssl/                startup-config.cfg
+
+admin@example:/> copy /cfg/startup-config.cfg /cfg/v25.01.0-startup-config.cfg
+admin@example:/> dir /cfg
+/cfg directory
+backup/             ssl/                startup-config.cfg           v25.01.0-startup-config.cfg
+
+admin@example:/> 
+```
+
+*Upgrade:* Here the image *pkg bundle* was made available via TFTP.
+
+```
+admin@example:/> upgrade tftp://198.18.117.1/infix-aarch64-25.03.1.pkg
+installing
+  0% Installing
+  0% Determining slot states
+ 10% Determining slot states done.
+...
+ 98% Copying image to rootfs.1
+ 99% Copying image to rootfs.1
+ 99% Copying image to rootfs.1 done.
+ 99% Updating slots done.
+100% Installing done.
+Installing `tftp://198.18.117.1/infix-aarch64-25.03.1.pkg` succeeded
+admin@example:/>
+```
+
+*Reboot:* The unit will boot on the other partition, with the newly
+installed image. The `Loading startup-config` step conducts migration
+of startup configuration if applicable.
+
+```
+admin@example:/> reboot
+[ OK ] Stopping Static routing daemon
+[ OK ] Stopping Zebra routing daemon
+...
+[ OK ] Loading startup-config
+[ OK ] Verifying self-signed https certificate
+[ OK ] Update DNS configuration
+[ OK ] Starting Status daemon
+
+Infix -- a Network Operating System v25.03.1 (ttyS0)
+example login: admin
+Password:
+.-------.
+|  . .  | Infix -- a Network Operating System
+|-. v .-| https://kernelkit.org
+'-'---'-'
+
+Run the command 'cli' for interactive OAM
+
+admin@example:~$ cli
+
+See the 'help' command for an introduction to the system
+
+admin@example:/> show software
+BOOT ORDER
+secondary primary net
+
+NAME      STATE     VERSION                DATE
+primary   inactive  v25.01.0               2025-04-25T10:15:00+00:00
+secondary booted    v25.03.1               2025-04-25T10:24:31+00:00
+admin@example:/>
+```
+
+As shown, the *boot order* has been updated, so that *secondary* is
+now the preferred boot source.
+
+To upgrade the remaining partition (`primary`), run the `upgrade URL`
+command again, and (optionally) reboot.
+
+### Configuration Migration
+
+The example above illustrated an upgrade from Infix v25.01.0 to
+v25.03.1. Inbetween these versions, YANG configuration definitions
+changed slightly (more details given below).
+
+During boot, Infix inspects the `version` meta information within the
+startup configuration file to determine if configuration migration is
+needed. In this specific case, the configuration file has version
+`1.4` while the booted software expects version `1.5` (the
+configuration version numbering differs from the Infix image version
+numbering).  The startup configuration is migrated to `1.5`
+definitions and stored, while a backup previous startup configuration
+is stored in directory `/cfg/backup/`.
+
+```
+admin@example:/> dir /cfg/backup/
+/cfg/backup/ directory
+startup-config-1.4.cfg
+
+admin@example:/>
+```
+
+The modifications made to the startup configuration can be viewed by
+comparing the files from the *shell*. An example is shown below.
+
+```
+admin@example:/> exit
+admin@example:~$ diff /cfg/backup/startup-config-1.4.cfg /cfg/startup-config.cfg
+--- /cfg/backup/startup-config-1.4.cfg
++++ /cfg/startup-config.cfg
+...
+-          "public-key-format": "ietf-crypto-types:ssh-public-key-format",
++          "public-key-format": "infix-crypto-types:ssh-public-key-format",
+...
+-          "private-key-format": "ietf-crypto-types:rsa-private-key-format",
++          "private-key-format": "infix-crypto-types:rsa-private-key-format",
+...
+-    "version": "1.4"
++    "version": "1.5"
+...
+admin@example:~$
+```
+
+### Downgrading Infix
+
+Downgrading to an earlier Infix version is possible, however,
+downgrading is **not** guaranteed to work smoothly. In particular,
+when the unit boots up with the downgraded version, it may fail to
+apply the *startup config*, and instead apply its [failure config][7].
+
+We consider two cases: downgrading with or without applying a backup
+startup configuration before rebooting.
+
+In both cases we start out with a unit running Infix v25.03.1, and
+wish to downgrade to v25.01.0.
+
+```
+admin@example:/> show software
+BOOT ORDER
+primary secondary net
+
+NAME      STATE     VERSION                DATE
+primary   booted    v25.03.1               2025-04-25T11:36:26+00:00
+secondary inactive  v25.03.1               2025-04-25T10:24:31+00:00
+admin@example:/>
+```
+
+#### Downgrading when applying a backup startup configuration
+
+This is the recommended approach to downgrade, given that you have a
+backup configuration available.  The objective is to avoid ending up
+with the unit in *failure config*.
+
+1. Find the backup configuration file.
+2. Run `upgrade URL` to install Infix image to downgrade to.
+3. Copy backup startup configuration to current startup configuration
+   (from shell).
+4. Reboot.
+
+*Find the backup configuration file:*
+
+Assume you have a backup startup config for the Infix version to
+downgrade to (here Infix v25.01.0, config `version 1.4`).
+
+The preferred approach is to use a startup configuration backed up
+when running Infix v25.01.0 on the unit. See the section on [upgrading
+Infix](#upgrading-infix) above for more information. In the example
+below, there is a backup file available named
+*v25.01.0-startup-config.cfg* 
+
+```
+admin@example:/> dir /cfg
+/cfg directory
+backup/             ssl/                startup-config.cfg           v25.01.0-startup-config.cfg
+
+admin@example:/> 
+```
+
+The alternative is to use a startup config implicitly backed up by the
+system as part of [configuration migration](#configuration-migration).
+
+```
+admin@example:/> dir /cfg/backup/
+/cfg/backup/ directory
+startup-config-1.4.cfg
+
+admin@example:/>
+```
+
+> [!CAUTION] Using a backup configuration file stored when the unit
+> was running the old version (e.g., v25.01.0-startup-config.cfg) is
+> preferred. Although backup files stored due to configuration
+> migration (e.g., startup-config-1.4.cfg) usually works too if the
+> configuration file version (`1.4`) matches, there are
+> situations when the system may fail to apply it as described below.
+
+The *configuration file version* (`1.4`) is only incremented when
+changes in YANG configuration syntax mandates it to handle
+*upgrading*.  Say the next Infix version includes a new feature
+setting, it can still have version `1.4`, as upgrading to it would not
+need migration. If a user then enables the new feature setting, the
+new configuration will no longer be compatible with the previous *Infix
+version*. A downgrade after enabling new features risks ending up with
+the unit in *failure config*. 
+
+
+*Use `upgrade` command to downgrade:*
+
+```
+admin@example:/> upgrade tftp://198.18.117.1/infix-aarch64-25.01.0.pkg
+installing
+  0% Installing
+  0% Determining slot states
+ 10% Determining slot states done.
+ ...
+ 99% Copying image to rootfs.1 done.
+ 99% Updating slots done.
+100% Installing done.
+Installing `tftp://198.18.117.1/infix-aarch64-25.01.0.pkg` succeeded
+admin@example:/>
+```
+
+*Apply the backup configuration file:*
+
+It is recommended to use a backup configuration file for the Infix version to
+downgrade to, if there is one available.
+
+```
+admin@example:/> copy /cfg/v25.01.0-startup-config.cfg /cfg/startup-config.cfg
+Overwrite existing file /cfg/startup-config.cfg (y/N)? y
+admin@example:/>
+```
+
+An alternative is to use a backup file stored when the system
+conducted a [configuration migration](#configuration-migration). See
+the *caution* note above.
+
+```
+admin@example:/> copy /cfg/backup/startup-config-1.4.cfg /cfg/startup-config.cfg
+Overwrite existing file /cfg/startup-config.cfg (y/N)? y
+admin@example:/>
+```
+
+*Reboot:*
+
+The unit will come up with the applied backup configuration. 
+
+```
+admin@example:/> reboot
+[ OK ] Saving system clock to file
+[ OK ] Stopping Software update service
+[ OK ] Stopping Status daemon
+...
+[ OK ] Bootstrapping YANG datastore
+[ OK ] Starting Configuration daemon
+[ OK ] Loading startup-config
+[ OK ] Update DNS configuration
+[ OK ] Verifying self-signed https certificate
+[ OK ] Starting Status daemon
+
+Infix -- a Network Operating System v25.01.0 (ttyS0)
+example login:
+```
+> [!NOTE]
+> If the unit despite these measures ends up in *failure config*, see
+> the next section for more information on how to recover.
+
+#### Downgrading without applying a backup startup configuration
+
+This procedure assumes you have access to the unit's console port and
+its default login credentials[^9].
+
+1. Downgrade
+2. Reboot
+3. Login with unit's default credentials
+4. Conduct factory reset
+5. (Then go on configure the unit as you wish)
+
+*Use `upgrade` command to downgrade:*
+
+```
+admin@example:/> upgrade tftp://198.18.117.1/infix-aarch64-25.01.0.pkg
+installing
+  0% Installing
+  0% Determining slot states
+ 10% Determining slot states done.
+ ...
+ 99% Copying image to rootfs.1 done.
+ 99% Updating slots done.
+100% Installing done.
+Installing `tftp://198.18.117.1/infix-aarch64-25.01.0.pkg` succeeded
+admin@example:/>
+```
+
+*Reboot:*
+
+Conduct a reboot. During boot, the unit fails to apply the existing
+startup configuration (config version `1.5` while software expects
+version `1.4` or earlier), and instead applies its [failure
+config][7]. This is what is seen on the console when this situation
+occurs. Note that the login prompt displays `failed` as part of the
+*hostname*.
+
+```
+admin@example:/> reboot
+[ OK ] Saving system clock to file
+[ OK ] Stopping Software update service
+[ OK ] Stopping Status daemon
+...
+[ OK ] Verifying SSH host keys
+[ OK ] Bootstrapping YANG datastore
+[ OK ] Starting Configuration daemon
+[FAIL] Loading startup-config
+[ OK ] Loading failure-config
+[ OK ] Verifying self-signed https certificate
+[ OK ] Starting Status daemon
+
+Infix -- a Network Operating System v25.01.0 (ttyS0)
+
+ERROR: Corrupt startup-config, system has reverted to default login credentials
+failed-00-00-00 login:
+```
+
+To remedy a situation like this, you can login with the unit's *default
+login credentials*, preferrably via a [console port][8].
+The unit's default credentials are typically printed on a sticker on
+the unit.
+
+```
+failed-00-00-00 login: admin
+Password:
+
+Run the command 'cli' for interactive OAM
+
+admin@failed-00-00-00:~$
+```
+
+When it is *safe* from a network operations perspective, you can
+conduct a factory reset and reboot. It is recommended to remove the
+unit from any production network before doing this, as a factory reset
+may enable undesired connectivity between the unit's ports.
+
+```
+admin@failed-00-00-00:~$ factory
+Factory reset device (y/N)? y
+factory: scheduled factory reset on next boot.
+Reboot now to perform reset, (y/N)? y
+[ OK ] Saving system time (UTC) to RTC
+[ OK ] Stopping mDNS alias advertiser
+...
+[ OK ] Starting Configuration daemon
+[ OK ] Loading startup-config
+[ OK ] Update DNS configuration
+[ OK ] Verifying self-signed https certificate
+[ OK ] Starting Status daemon
+[ OK ] Starting Status daemon
+
+
+Please press Enter to activate this console.
+
+Infix -- a Network Operating System v25.01.0 (ttyS0)
+example login:
+```
+
+Continued configuration is done as with any unit after factory reset.
+
 [1]: https://www.rfc-editor.org/rfc/rfc7317
 [2]: https://github.com/kernelkit/infix/blob/main/src/confd/yang/infix-system%402024-02-29.yang
 [3]: https://www.rfc-editor.org/rfc/rfc8341
 [4]: https://chrony-project.org/doc/4.6.1/chronyc.html
+[5]: https://github.com/kernelkit/infix/blob/main/src/confd/yang/confd/infix-system-software.yang
+[6]: netboot.md
+[7]: introduction.md#system-boot
+[8]: management.md#console-port
+[^9]: In failure config, Infix puts all Ethernet ports as individual
+    interfaces. With direct access, one can connect with e.g., SSH,
+    using link local IPv6 addresses. This as an alternative to
+    connecting via a console port.
+[^10]: Set up an FTP/TFTP/SFTP or HTTP/HTTPS server on the same LAN. 
+
+[11]: scripting.md#-backup-configuration-using-sysrepocfg-and-scp

package/board/board.mk

@@ -1,53 +1,2 @@
-define inner-ix-board
-
-$(2)_VERSION = ix-board
-$(2)_LICENSE = BSD-3-Clause
-$(2)_LICENSE_FILES = LICENSE
-$(2)_SITE_METHOD = local
-$(2)_SITE = $$(BR2_EXTERNAL_INFIX_PATH)/src/board/$(1)
-$(2)_REDISTRIBUTE = NO
-
-# The kernel must be built first.
-$(2)_DEPENDENCIES += \
-	linux \
-	$$(BR2_MAKE_HOST_DEPENDENCY)
-
-# This is only defined in some infrastructures (e.g. autotools, cmake),
-# but not in others (e.g. generic). So define it here as well.
-$(2)_MAKE ?= $$(BR2_MAKE)
-
-define $(2)_DTBS_BUILD
-	@$$(call MESSAGE,"Building device tree blob(s)")
-	$$(LINUX_MAKE_ENV) $$($$(PKG)_MAKE) \
-		-C $$(LINUX_DIR) \
-		$$(LINUX_MAKE_FLAGS) \
-		$$($(2)_DTB_MAKE_OPTS) \
-		PWD=$$(@D)/dts \
-		M=$$(@D)/dts \
-		modules
-endef
-$(2)_POST_BUILD_HOOKS += $(2)_DTBS_BUILD
-
-define $(2)_DTBS_INSTALL_TARGET
-	@$$(call MESSAGE,"Installing device tree blob(s)")
-	$$(TARGET_MAKE_ENV) $$(TARGET_CONFIGURE_OPTS) $$($$(PKG)_MAKE) \
-		-f $$(BR2_EXTERNAL_INFIX_PATH)/package/board/dtb-inst.makefile \
-		-C $$(@D)/dts \
-		DESTDIR="$$(TARGET_DIR)" \
-		install
-endef
-$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_DTBS_INSTALL_TARGET
-
-define $(2)_OVERLAY_INSTALL_TARGET
-	@test -d $$(@D)/rootfs && \
-	$$(call MESSAGE,"Copying overlay") && \
-	$$(call SYSTEM_RSYNC,$$(@D)/rootfs,$(TARGET_DIR)) || \
-	true
-endef
-$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_OVERLAY_INSTALL_TARGET
-
-endef
-
-ix-board = $(call inner-ix-board,$(pkgname),$(call UPPERCASE,$(pkgname)))
-
+include $(BR2_EXTERNAL_INFIX_PATH)/package/board/ix-board.mk
 include $(sort $(wildcard $(BR2_EXTERNAL_INFIX_PATH)/package/board/*/*.mk))

package/board/freescale-imx8mp-evk/imx8mp-evk.mk

@@ -20,6 +20,26 @@ define FREESCALE_IMX8MP_EVK_LINUX_CONFIG_FIXUPS
 	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX)
 	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX8MP)
 	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
+# For X
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_ETNAVIV)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX8MP_HDMI_PVI)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX_LCDIF)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MOUSE)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MOUSEDEV)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_HID_GENERIC)
+
+# For USB
+	$(call KCONFIG_DISABLE_OPT,CONFIG_USB)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_USB)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3)
+	$(call KCONFIG_DISABLE_OPT,CONFIG_USB_DWC3_GADGET)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3_HOST)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_IMX_BUS_DEVFREQ)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_TYPEC_TCPCI)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_TYPEC_SWITCH_GPIO)
 endef
 
 $(eval $(ix-board))

package/board/ix-board.mk

@@ -0,0 +1,51 @@
+define inner-ix-board
+
+$(2)_VERSION = ix-board
+$(2)_LICENSE = BSD-3-Clause
+$(2)_LICENSE_FILES = LICENSE
+$(2)_SITE_METHOD = local
+$(2)_SITE = $$(BR2_EXTERNAL_INFIX_PATH)/src/board/$(1)
+$(2)_REDISTRIBUTE = NO
+
+# The kernel must be built first.
+$(2)_DEPENDENCIES += \
+	linux \
+	$$(BR2_MAKE_HOST_DEPENDENCY)
+
+# This is only defined in some infrastructures (e.g. autotools, cmake),
+# but not in others (e.g. generic). So define it here as well.
+$(2)_MAKE ?= $$(BR2_MAKE)
+
+define $(2)_DTBS_BUILD
+	@$$(call MESSAGE,"Building device tree blob(s)")
+	$$(LINUX_MAKE_ENV) $$($$(PKG)_MAKE) \
+		-C $$(LINUX_DIR) \
+		$$(LINUX_MAKE_FLAGS) \
+		$$($(2)_DTB_MAKE_OPTS) \
+		PWD=$$(@D)/dts \
+		M=$$(@D)/dts \
+		modules
+endef
+$(2)_POST_BUILD_HOOKS += $(2)_DTBS_BUILD
+
+define $(2)_DTBS_INSTALL_TARGET
+	@$$(call MESSAGE,"Installing device tree blob(s)")
+	$$(TARGET_MAKE_ENV) $$(TARGET_CONFIGURE_OPTS) $$($$(PKG)_MAKE) \
+		-f $$(BR2_EXTERNAL_INFIX_PATH)/package/board/dtb-inst.makefile \
+		-C $$(@D)/dts \
+		DESTDIR="$$(TARGET_DIR)" \
+		install
+endef
+$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_DTBS_INSTALL_TARGET
+
+define $(2)_OVERLAY_INSTALL_TARGET
+	@test -d $$(@D)/rootfs && \
+	$$(call MESSAGE,"Copying overlay") && \
+	$$(call SYSTEM_RSYNC,$$(@D)/rootfs,$(TARGET_DIR)) || \
+	true
+endef
+$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_OVERLAY_INSTALL_TARGET
+
+endef
+
+ix-board = $(call inner-ix-board,$(pkgname),$(call UPPERCASE,$(pkgname)))

package/confd/confd.mk

@@ -70,22 +70,34 @@ define CONFD_INSTALL_YANG_MODULES_CONTAINERS
 endef
 endif
 
-define CONFD_PERMISSIONS
-	/etc/sysrepo/data/ r 660 root sys-cli - - - - -
-	/etc/sysrepo/data  d 770 root sys-cli - - - - -
+# PER_PACKAGE_DIR
+# Since the last package in the dependency chain that runs sysrepoctl is confd, we need to
+# manually copy the *real* content here from host-sysrepo.
+ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
+define CONFD_INSTALL_IN_ROMFS
+	cp -a $(PER_PACKAGE_DIR)/host-sysrepo/target/etc/sysrepo/* $(PER_PACKAGE_DIR)/confd/target/etc/sysrepo/
 endef
+endif
 
+# PER_PACKAGE_DIR
+# Need to do some special stuff if using per-packet (parallel) since sysrepo install the submodules in
+# $(PER_PACKAGE_DIR)/host-sysrepo/target/etc/sysrepo/ but $(PER_PACKAGE_DIR)/confd/target/etc/sysrepo/ contains remains
+# of other packets that have installed its models (netopeer2), we want the result in $(PER_PACKAGE_DIR)/host-sysrepo/target/etc/sysrepo/
 define CONFD_EMPTY_SYSREPO
-	rm -rf $(TARGET_DIR)/etc/sysrepo/data/
+	rm -rf $(TARGET_DIR)/etc/sysrepo/*
+	if [ "$(BR2_PER_PACKAGE_DIRECTORIES)" = "y" ]; then \
+		rm -rf $(PER_PACKAGE_DIR)/host-sysrepo/target/etc/sysrepo/* $(PER_PACKAGE_DIR)/confd/target/etc/sysrepo/*; \
+	fi
 endef
 define CONFD_CLEANUP
 	rm -f /dev/shm/$(CONFD_SYSREPO_SHM_PREFIX)*
 endef
-CONFD_PRE_INSTALL_TARGET_HOOKS += CONFD_EMPTY_SYSREPO
-CONFD_PRE_INSTALL_TARGET_HOOKS += CONFD_CLEANUP
+CONFD_PRE_BUILD_HOOKS += CONFD_EMPTY_SYSREPO
+CONFD_PRE_BUILD_HOOKS += CONFD_CLEANUP
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_EXTRA
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_CONTAINERS
-CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_CLEANUP
+CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_IN_ROMFS
+CONFD_TARGET_FINALIZE_HOOKS += CONFD_CLEANUP
 
 $(eval $(autotools-package))

package/landing/landing.mk

@@ -11,6 +11,7 @@ LANDING_LICENSE = ISC
 LANDING_LICENSE_FILES = LICENSE
 
 define LANDING_INSTALL_TARGET_CMDS
+        mkdir -p $(TARGET_DIR)/usr/html/
 	cp $(@D)/*.html $(TARGET_DIR)/usr/html/
 	cp $(@D)/*.png  $(TARGET_DIR)/usr/html/
 endef

package/libyang-cpp/0001-added-support-for-RpcYang-in-Context-parseOp.patch

@@ -1,11 +1,11 @@
 From d0f6422fee7a46fcb7445c88f499f61b3eb0ead0 Mon Sep 17 00:00:00 2001
 From: Adam Piecek <Adam.Piecek@cesnet.cz>
 Date: Wed, 23 Oct 2024 14:37:09 +0200
-Subject: [PATCH 1/8] added support for RpcYang in Context::parseOp
+Subject: [PATCH 01/18] added support for RpcYang in Context::parseOp
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Change-Id: I25182ea2d042be1e6e4246e18aee260cc032e547
 Signed-off-by: Mattias Walström <lazzer@gmail.com>

package/libyang-cpp/0002-throw-when-lyd_validate_all-returns-error.patch

@@ -1,11 +1,11 @@
 From 7e015f3486bdbb54f1dcc2e2ce51102b1d623081 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Wed, 23 Oct 2024 12:52:24 +0200
-Subject: [PATCH 2/8] throw when lyd_validate_all returns error
+Subject: [PATCH 02/18] throw when lyd_validate_all returns error
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Bug: https://github.com/CESNET/libyang-cpp/issues/20
 Change-Id: I005a2f1b057978573a4046e7b4cc31d77e36fde3

package/libyang-cpp/0003-remove-a-misleading-comment.patch

@@ -1,11 +1,11 @@
 From 490d8bb242d33213b948485f5b94c55e22cf86a6 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
 Date: Thu, 21 Nov 2024 11:32:44 +0100
-Subject: [PATCH 3/8] remove a misleading comment
+Subject: [PATCH 03/18] remove a misleading comment
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 The whole intention within action's input/output handling here was to
 put some emphasis on the fact that we aren't tracking the input/output

package/libyang-cpp/0004-schema-improve-List-keys-not-to-use-std-move.patch

@@ -1,11 +1,11 @@
 From e1b17386cf61048d2fe27fffb3b763981a225f52 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Bed=C5=99ich=20Schindler?= <bedrich.schindler@gmail.com>
 Date: Wed, 27 Nov 2024 09:47:47 +0100
-Subject: [PATCH 4/8] schema: improve `List::keys()` not to use `std::move`
+Subject: [PATCH 04/18] schema: improve `List::keys()` not to use `std::move`
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 `List::keys()` used `std::move` while iterating over array of leafs.
 This was solved without using `std::move`.

package/libyang-cpp/0005-schema-make-leaf-list-s-default-statement-available.patch

@@ -1,11 +1,11 @@
 From 1102ecdcafbc9206f59b383769687e418557838e Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Bed=C5=99ich=20Schindler?= <bedrich.schindler@gmail.com>
 Date: Mon, 25 Nov 2024 15:54:02 +0100
-Subject: [PATCH 5/8] schema: make leaf-list's `default` statement available
+Subject: [PATCH 05/18] schema: make leaf-list's `default` statement available
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Make leaf-list's `default` statement available so that it can be
 accessed if end-user requires reading schema nodes.

package/libyang-cpp/0006-schema-Make-choice-and-case-statements-available.patch

@@ -1,11 +1,11 @@
 From 01f2633cef60495d5cafc4b4b1f25273b03ab3cd Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Bed=C5=99ich=20Schindler?= <bedrich.schindler@gmail.com>
 Date: Tue, 22 Oct 2024 15:11:30 +0200
-Subject: [PATCH 6/8] schema: Make choice and case statements available
+Subject: [PATCH 06/18] schema: Make choice and case statements available
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Make choice and case statements available so that they can be accessed
 if end-user requires reading schema nodes.

package/libyang-cpp/0007-Wrap-lyd_change_term-for-changing-the-value-for-a-te.patch

@@ -1,12 +1,12 @@
 From a1acdc794facf8cbf113f73274ecebd5898c81a1 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
 Date: Tue, 17 Dec 2024 15:08:43 +0100
-Subject: [PATCH 7/8] Wrap lyd_change_term for changing the value for a
+Subject: [PATCH 07/18] Wrap lyd_change_term for changing the value for a
  terminal node
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Previously, the code would require a newPath(...,
 libyang::CreationOptions::Update), which is quite a mouthful.

package/libyang-cpp/0008-Add-Module-child-Module-childrenDfs-and-Module-immed.patch

@@ -0,0 +1,652 @@
+From 32b200ed06e9adb44a8d4ce6771f18812a54d06e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Bed=C5=99ich=20Schindler?= <bedrich.schindler@gmail.com>
+Date: Wed, 20 Nov 2024 10:20:19 +0100
+Subject: [PATCH 08/18] Add `Module::child()`, `Module::childrenDfs()` and
+ `Module::immediateChildren()`
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Those functions are implemented in the same manner as in `SchemaNode`
+and allows to walk through modules children. This is counterpart to
+already implemented `Module::childInstantiables()` that returns
+instantiables schema nodes. These return all nodes, including
+the schema-only nodes such as choice and case if end-user needs
+to read its schema.
+
+While the implementation is inspired by functions in `SchemaNode`,
+imlementation of `Module::parent()` and `Module::siblings()` was omitted
+as those do no make sense on `Module`.
+
+Change-Id: I38c8374304f859d65343d04d08302e07deb05f27
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ include/libyang-cpp/Collection.hpp |   1 +
+ include/libyang-cpp/Module.hpp     |   5 +
+ src/Module.cpp                     |  40 +++
+ tests/context.cpp                  |   5 +
+ tests/example_schema.hpp           |  21 ++
+ tests/schema_node.cpp              | 409 +++++++++++++++++++----------
+ 6 files changed, 346 insertions(+), 135 deletions(-)
+
+diff --git a/include/libyang-cpp/Collection.hpp b/include/libyang-cpp/Collection.hpp
+index 557a0a2..4324791 100644
+--- a/include/libyang-cpp/Collection.hpp
++++ b/include/libyang-cpp/Collection.hpp
+@@ -98,6 +98,7 @@ class LIBYANG_CPP_EXPORT Collection {
+ public:
+     friend DataNode;
+     friend Iterator<NodeType, ITER_TYPE>;
++    friend Module;
+     friend SchemaNode;
+     ~Collection();
+     Collection(const Collection<NodeType, ITER_TYPE>&);
+diff --git a/include/libyang-cpp/Module.hpp b/include/libyang-cpp/Module.hpp
+index f10c36f..ab20d36 100644
+--- a/include/libyang-cpp/Module.hpp
++++ b/include/libyang-cpp/Module.hpp
+@@ -34,6 +34,8 @@ class ChildInstanstiables;
+ class Identity;
+ class SchemaNode;
+ class SubmoduleParsed;
++template <typename NodeType, IterationType ITER_TYPE>
++class Collection;
+ 
+ namespace types {
+ class IdentityRef;
+@@ -86,7 +88,10 @@ public:
+ 
+     std::vector<Identity> identities() const;
+ 
++    std::optional<SchemaNode> child() const;
+     ChildInstanstiables childInstantiables() const;
++    libyang::Collection<SchemaNode, IterationType::Dfs> childrenDfs() const;
++    Collection<SchemaNode, IterationType::Sibling> immediateChildren() const;
+     std::vector<SchemaNode> actionRpcs() const;
+ 
+     std::string printStr(const SchemaOutputFormat format, const std::optional<SchemaPrintFlags> flags = std::nullopt, std::optional<size_t> lineLength = std::nullopt) const;
+diff --git a/src/Module.cpp b/src/Module.cpp
+index 4dc9e3b..d6d4023 100644
+--- a/src/Module.cpp
++++ b/src/Module.cpp
+@@ -8,6 +8,7 @@
+ 
+ #include <algorithm>
+ #include <libyang-cpp/ChildInstantiables.hpp>
++#include <libyang-cpp/Collection.hpp>
+ #include <libyang-cpp/Module.hpp>
+ #include <libyang-cpp/Utils.hpp>
+ #include <libyang/libyang.h>
+@@ -178,6 +179,23 @@ std::vector<Identity> Module::identities() const
+     return res;
+ }
+ 
++/**
++ * @brief Returns the first child node of this module.
++ * @return The child, or std::nullopt if there are no children.
++ */
++std::optional<SchemaNode> Module::child() const
++{
++    if (!m_module->implemented) {
++        throw Error{"Module::child: module is not implemented"};
++    }
++
++    if (!m_module->compiled->data) {
++        return std::nullopt;
++    }
++
++    return SchemaNode{m_module->compiled->data, m_ctx};
++}
++
+ /**
+  * @brief Returns a collection of data instantiable top-level nodes of this module.
+  *
+@@ -191,6 +209,28 @@ ChildInstanstiables Module::childInstantiables() const
+     return ChildInstanstiables{nullptr, m_module->compiled, m_ctx};
+ }
+ 
++/**
++ * @brief Returns a collection for iterating depth-first over the subtree this module points to.
++ */
++Collection<SchemaNode, IterationType::Dfs> Module::childrenDfs() const
++{
++    if (!m_module->implemented) {
++        throw Error{"Module::childrenDfs: module is not implemented"};
++    }
++    return Collection<SchemaNode, IterationType::Dfs>{m_module->compiled->data, m_ctx};
++}
++
++/**
++ * @brief Returns a collection for iterating over the immediate children of where this module points to.
++ *
++ * This is a convenience function for iterating over this->child().siblings() which does not throw even when module has no children.
++ */
++Collection<SchemaNode, IterationType::Sibling> Module::immediateChildren() const
++{
++    auto c = child();
++    return c ? c->siblings() : Collection<SchemaNode, IterationType::Sibling>{nullptr, nullptr};
++}
++
+ /**
+  * @brief Returns a collection of RPC nodes (not action nodes) as SchemaNode
+  *
+diff --git a/tests/context.cpp b/tests/context.cpp
+index 5929b75..25343db 100644
+--- a/tests/context.cpp
++++ b/tests/context.cpp
+@@ -713,6 +713,11 @@ TEST_CASE("context")
+   +--rw anydataWithMandatoryChild       anydata
+   +--rw anyxmlBasic?                    anyxml
+   +--rw anyxmlWithMandatoryChild        anyxml
++  +--rw (choiceOnModule)?
++  |  +--:(case1)
++  |  |  +--rw choiceOnModuleLeaf1?   string
++  |  +--:(case2)
++  |     +--rw choiceOnModuleLeaf2?   string
+   +--rw choiceBasicContainer
+   |  +--rw (choiceBasic)?
+   |     +--:(case1)
+diff --git a/tests/example_schema.hpp b/tests/example_schema.hpp
+index ae3b4de..0d8acb9 100644
+--- a/tests/example_schema.hpp
++++ b/tests/example_schema.hpp
+@@ -390,6 +390,19 @@ module type_module {
+         mandatory true;
+     }
+ 
++    choice choiceOnModule {
++        case case1 {
++            leaf choiceOnModuleLeaf1 {
++                type string;
++            }
++        }
++        case case2 {
++            leaf choiceOnModuleLeaf2 {
++                type string;
++            }
++        }
++    }
++
+     container choiceBasicContainer {
+         choice choiceBasic {
+             case case1 {
+@@ -787,6 +800,14 @@ module type_module {
+ }
+ )"s;
+ 
++const auto empty_module = R"(
++module empty_module {
++    yang-version 1.1;
++    namespace "e";
++    prefix "e";
++}
++)"s;
++
+ const auto with_inet_types_module = R"(
+ module with-inet-types {
+   yang-version 1.1;
+diff --git a/tests/schema_node.cpp b/tests/schema_node.cpp
+index 8d74bd2..0001377 100644
+--- a/tests/schema_node.cpp
++++ b/tests/schema_node.cpp
+@@ -24,8 +24,10 @@ TEST_CASE("SchemaNode")
+         libyang::ContextOptions::SetPrivParsed | libyang::ContextOptions::NoYangLibrary | libyang::ContextOptions::DisableSearchCwd};
+     ctx->parseModule(example_schema, libyang::SchemaFormat::YANG);
+     ctx->parseModule(type_module, libyang::SchemaFormat::YANG);
++    ctx->parseModule(empty_module, libyang::SchemaFormat::YANG);
+     ctxWithParsed->parseModule(example_schema, libyang::SchemaFormat::YANG);
+     ctxWithParsed->parseModule(type_module, libyang::SchemaFormat::YANG);
++    ctxWithParsed->parseModule(empty_module, libyang::SchemaFormat::YANG);
+ 
+     DOCTEST_SUBCASE("context lifetime")
+     {
+@@ -74,10 +76,34 @@ TEST_CASE("SchemaNode")
+         REQUIRE(node->schema().path() == "/example-schema:person");
+     }
+ 
+-    DOCTEST_SUBCASE("SchemaNode::child")
++    DOCTEST_SUBCASE("child")
+     {
+-        REQUIRE(ctx->findPath("/type_module:listAdvancedWithTwoKey").child()->name() == "first");
+-        REQUIRE(!ctx->findPath("/type_module:leafString").child().has_value());
++        DOCTEST_SUBCASE("implemented module")
++        {
++            DOCTEST_SUBCASE("SchemaNode::child")
++            {
++                REQUIRE(ctx->findPath("/type_module:listAdvancedWithTwoKey").child()->name() == "first");
++                REQUIRE(!ctx->findPath("/type_module:leafString").child().has_value());
++            }
++
++            DOCTEST_SUBCASE("Module::child")
++            {
++                REQUIRE(ctx->getModule("type_module", std::nullopt)->child()->name() == "anydataBasic");
++                REQUIRE(!ctx->getModule("empty_module", std::nullopt)->child());
++            }
++        }
++
++        DOCTEST_SUBCASE("unimplemented module")
++        {
++            DOCTEST_SUBCASE("Module::child")
++            {
++                ctx->setSearchDir(TESTS_DIR / "yang");
++                auto modYangPatch = ctx->loadModule("ietf-yang-patch", std::nullopt);
++                auto modRestconf = ctx->getModule("ietf-restconf", "2017-01-26");
++                REQUIRE(!modRestconf->implemented());
++                REQUIRE_THROWS_WITH_AS(modRestconf->child(), "Module::child: module is not implemented", libyang::Error);
++            }
++        }
+     }
+ 
+     DOCTEST_SUBCASE("SchemaNode::config")
+@@ -160,162 +186,275 @@ TEST_CASE("SchemaNode")
+ 
+     DOCTEST_SUBCASE("childInstantiables")
+     {
+-        std::vector<std::string> expectedPaths;
+-        std::optional<libyang::ChildInstanstiables> children;
+-
+-        DOCTEST_SUBCASE("SchemaNode::childInstantiables")
++        DOCTEST_SUBCASE("implemented module")
+         {
+-            expectedPaths = {
+-                "/type_module:listAdvancedWithOneKey/lol",
+-                "/type_module:listAdvancedWithOneKey/notKey1",
+-                "/type_module:listAdvancedWithOneKey/notKey2",
+-                "/type_module:listAdvancedWithOneKey/notKey3",
+-                "/type_module:listAdvancedWithOneKey/notKey4",
+-            };
++            std::vector<std::string> expectedPaths;
++            std::optional<libyang::ChildInstanstiables> children;
++
++            DOCTEST_SUBCASE("SchemaNode::childInstantiables")
++            {
++                expectedPaths = {
++                    "/type_module:listAdvancedWithOneKey/lol",
++                    "/type_module:listAdvancedWithOneKey/notKey1",
++                    "/type_module:listAdvancedWithOneKey/notKey2",
++                    "/type_module:listAdvancedWithOneKey/notKey3",
++                    "/type_module:listAdvancedWithOneKey/notKey4",
++                };
++
++                children = ctx->findPath("/type_module:listAdvancedWithOneKey").childInstantiables();
++            }
+ 
+-            children = ctx->findPath("/type_module:listAdvancedWithOneKey").childInstantiables();
+-        }
++            DOCTEST_SUBCASE("Module::childInstantiables")
++            {
++                expectedPaths = {
++                    "/type_module:anydataBasic",
++                    "/type_module:anydataWithMandatoryChild",
++                    "/type_module:anyxmlBasic",
++                    "/type_module:anyxmlWithMandatoryChild",
++                    "/type_module:choiceOnModuleLeaf1",
++                    "/type_module:choiceOnModuleLeaf2",
++                    "/type_module:choiceBasicContainer",
++                    "/type_module:choiceWithMandatoryContainer",
++                    "/type_module:choiceWithDefaultContainer",
++                    "/type_module:implicitCaseContainer",
++                    "/type_module:leafBinary",
++                    "/type_module:leafBits",
++                    "/type_module:leafEnum",
++                    "/type_module:leafEnum2",
++                    "/type_module:leafNumber",
++                    "/type_module:leafRef",
++                    "/type_module:leafRefRelaxed",
++                    "/type_module:leafString",
++                    "/type_module:leafUnion",
++                    "/type_module:meal",
++                    "/type_module:leafWithConfigFalse",
++                    "/type_module:leafWithDefaultValue",
++                    "/type_module:leafWithDescription",
++                    "/type_module:leafWithMandatoryTrue",
++                    "/type_module:leafWithStatusDeprecated",
++                    "/type_module:leafWithStatusObsolete",
++                    "/type_module:leafWithUnits",
++                    "/type_module:iid-valid",
++                    "/type_module:iid-relaxed",
++                    "/type_module:leafListBasic",
++                    "/type_module:leafListWithDefault",
++                    "/type_module:leafListWithMinMaxElements",
++                    "/type_module:leafListWithUnits",
++                    "/type_module:listBasic",
++                    "/type_module:listAdvancedWithOneKey",
++                    "/type_module:listAdvancedWithTwoKey",
++                    "/type_module:listWithMinMaxElements",
++                    "/type_module:numeric",
++                    "/type_module:container",
++                    "/type_module:containerWithMandatoryChild",
++                };
++                children = ctx->getModule("type_module", std::nullopt)->childInstantiables();
++            }
+ 
+-        DOCTEST_SUBCASE("Module::childInstantiables")
+-        {
+-            expectedPaths = {
+-                "/type_module:anydataBasic",
+-                "/type_module:anydataWithMandatoryChild",
+-                "/type_module:anyxmlBasic",
+-                "/type_module:anyxmlWithMandatoryChild",
+-                "/type_module:choiceBasicContainer",
+-                "/type_module:choiceWithMandatoryContainer",
+-                "/type_module:choiceWithDefaultContainer",
+-                "/type_module:implicitCaseContainer",
+-                "/type_module:leafBinary",
+-                "/type_module:leafBits",
+-                "/type_module:leafEnum",
+-                "/type_module:leafEnum2",
+-                "/type_module:leafNumber",
+-                "/type_module:leafRef",
+-                "/type_module:leafRefRelaxed",
+-                "/type_module:leafString",
+-                "/type_module:leafUnion",
+-                "/type_module:meal",
+-                "/type_module:leafWithConfigFalse",
+-                "/type_module:leafWithDefaultValue",
+-                "/type_module:leafWithDescription",
+-                "/type_module:leafWithMandatoryTrue",
+-                "/type_module:leafWithStatusDeprecated",
+-                "/type_module:leafWithStatusObsolete",
+-                "/type_module:leafWithUnits",
+-                "/type_module:iid-valid",
+-                "/type_module:iid-relaxed",
+-                "/type_module:leafListBasic",
+-                "/type_module:leafListWithDefault",
+-                "/type_module:leafListWithMinMaxElements",
+-                "/type_module:leafListWithUnits",
+-                "/type_module:listBasic",
+-                "/type_module:listAdvancedWithOneKey",
+-                "/type_module:listAdvancedWithTwoKey",
+-                "/type_module:listWithMinMaxElements",
+-                "/type_module:numeric",
+-                "/type_module:container",
+-                "/type_module:containerWithMandatoryChild",
+-            };
+-            children = ctx->getModule("type_module", std::nullopt)->childInstantiables();
+-        }
++            std::vector<std::string> actualPaths;
++            for (const auto& child : *children) {
++                actualPaths.emplace_back(child.path());
++            }
+ 
+-        std::vector<std::string> actualPaths;
+-        for (const auto& child : *children) {
+-            actualPaths.emplace_back(child.path());
++            REQUIRE(expectedPaths == actualPaths);
+         }
+ 
+-        REQUIRE(expectedPaths == actualPaths);
++        DOCTEST_SUBCASE("unimplemented module")
++        {
++            DOCTEST_SUBCASE("Module::childInstantiables")
++            {
++                ctx->setSearchDir(TESTS_DIR / "yang");
++                auto modYangPatch = ctx->loadModule("ietf-yang-patch", std::nullopt);
++                auto modRestconf = ctx->getModule("ietf-restconf", "2017-01-26");
++                REQUIRE(!modRestconf->implemented());
++                REQUIRE_THROWS_WITH_AS(modRestconf->childInstantiables(), "Module::childInstantiables: module is not implemented", libyang::Error);
++            }
++        }
+     }
+ 
+-    DOCTEST_SUBCASE("SchemaNode::childrenDfs")
++    DOCTEST_SUBCASE("childrenDfs")
+     {
+-        std::vector<std::string> expectedPaths;
++        DOCTEST_SUBCASE("implemented module")
++        {
++            std::vector<std::string> expectedPaths;
++            std::optional<libyang::Collection<libyang::SchemaNode, libyang::IterationType::Dfs>> children;
+ 
+-        const char* path;
++            DOCTEST_SUBCASE("SchemaNode::childrenDfs")
++            {
++                DOCTEST_SUBCASE("listAdvancedWithTwoKey")
++                {
++                    expectedPaths = {
++                        "/type_module:listAdvancedWithTwoKey",
++                        "/type_module:listAdvancedWithTwoKey/first",
++                        "/type_module:listAdvancedWithTwoKey/second",
++                    };
++                    children = ctx->findPath("/type_module:listAdvancedWithTwoKey").childrenDfs();
++                }
+ 
+-        DOCTEST_SUBCASE("listAdvancedWithTwoKey")
+-        {
+-            expectedPaths = {
+-                "/type_module:listAdvancedWithTwoKey",
+-                "/type_module:listAdvancedWithTwoKey/first",
+-                "/type_module:listAdvancedWithTwoKey/second",
+-            };
++                DOCTEST_SUBCASE("DFS on a leaf")
++                {
++                    expectedPaths = {
++                        "/type_module:leafString",
++                    };
++                    children = ctx->findPath("/type_module:leafString").childrenDfs();
++                }
++            }
+ 
+-            path = "/type_module:listAdvancedWithTwoKey";
+-        }
++            DOCTEST_SUBCASE("Module::childrenDfs")
++            {
++                expectedPaths = {
++                    "/type_module:anydataBasic",
++                };
++                children = ctx->getModule("type_module", std::nullopt)->childrenDfs();
++            }
+ 
+-        DOCTEST_SUBCASE("DFS on a leaf")
+-        {
+-            expectedPaths = {
+-                "/type_module:leafString",
+-            };
++            std::vector<std::string> actualPaths;
++            for (const auto& it : *children) {
++                actualPaths.emplace_back(it.path());
++            }
+ 
+-            path = "/type_module:leafString";
++            REQUIRE(actualPaths == expectedPaths);
+         }
+ 
+-        std::vector<std::string> actualPaths;
+-        for (const auto& it : ctx->findPath(path).childrenDfs()) {
+-            actualPaths.emplace_back(it.path());
++        DOCTEST_SUBCASE("unimplemented module")
++        {
++            DOCTEST_SUBCASE("Module::childrenDfs")
++            {
++                ctx->setSearchDir(TESTS_DIR / "yang");
++                auto modYangPatch = ctx->loadModule("ietf-yang-patch", std::nullopt);
++                auto modRestconf = ctx->getModule("ietf-restconf", "2017-01-26");
++                REQUIRE(!modRestconf->implemented());
++                REQUIRE_THROWS_WITH_AS(modRestconf->childrenDfs(), "Module::childrenDfs: module is not implemented", libyang::Error);
++            }
+         }
+-
+-        REQUIRE(actualPaths == expectedPaths);
+     }
+ 
+-    DOCTEST_SUBCASE("SchemaNode::immediateChildren")
++    DOCTEST_SUBCASE("immediateChildren")
+     {
+-        std::vector<std::string> expectedPaths;
+-        const char* path;
+-        DOCTEST_SUBCASE("listAdvancedWithTwoKey")
+-        {
+-            expectedPaths = {
+-                "/type_module:listAdvancedWithTwoKey/first",
+-                "/type_module:listAdvancedWithTwoKey/second",
+-            };
+-            path = "/type_module:listAdvancedWithTwoKey";
+-        }
+-        DOCTEST_SUBCASE("leaf")
++        DOCTEST_SUBCASE("implemented module")
+         {
+-            expectedPaths = {
+-            };
+-            path = "/type_module:leafString";
+-        }
+-        DOCTEST_SUBCASE("no recursion")
+-        {
+-            expectedPaths = {
+-                "/type_module:container/x",
+-                "/type_module:container/y",
+-                "/type_module:container/z",
+-            };
+-            path = "/type_module:container";
+-        }
+-        DOCTEST_SUBCASE("empty container")
+-        {
+-            expectedPaths = {
+-            };
+-            path = "/type_module:container/y";
+-        }
+-        DOCTEST_SUBCASE("one item")
+-        {
+-            expectedPaths = {
+-                "/type_module:container/z/z1",
+-            };
+-            path = "/type_module:container/z";
++            std::vector<std::string> expectedPaths;
++            std::optional<libyang::Collection<libyang::SchemaNode, libyang::IterationType::Sibling>> children;
++
++            DOCTEST_SUBCASE("SchemaNode::immediateChildren")
++            {
++                DOCTEST_SUBCASE("listAdvancedWithTwoKey")
++                {
++                    expectedPaths = {
++                        "/type_module:listAdvancedWithTwoKey/first",
++                        "/type_module:listAdvancedWithTwoKey/second",
++                    };
++                    children = ctx->findPath("/type_module:listAdvancedWithTwoKey").immediateChildren();
++                }
++                DOCTEST_SUBCASE("leaf")
++                {
++                    expectedPaths = {};
++                    children = ctx->findPath("/type_module:leafString").immediateChildren();
++                }
++                DOCTEST_SUBCASE("no recursion")
++                {
++                    expectedPaths = {
++                        "/type_module:container/x",
++                        "/type_module:container/y",
++                        "/type_module:container/z",
++                    };
++                    children = ctx->findPath("/type_module:container").immediateChildren();
++                }
++                DOCTEST_SUBCASE("empty container")
++                {
++                    expectedPaths = {};
++                    children = ctx->findPath("/type_module:container/y").immediateChildren();
++                }
++                DOCTEST_SUBCASE("one item")
++                {
++                    expectedPaths = {
++                        "/type_module:container/z/z1",
++                    };
++                    children = ctx->findPath("/type_module:container/z").immediateChildren();
++                }
++                DOCTEST_SUBCASE("two items")
++                {
++                    expectedPaths = {
++                        "/type_module:container/x/x1",
++                        "/type_module:container/x/x2",
++                    };
++                    children = ctx->findPath("/type_module:container/x").immediateChildren();
++                }
++            }
++
++            DOCTEST_SUBCASE("Module::immediateChildren")
++            {
++                expectedPaths = {
++                    "/type_module:anydataBasic",
++                    "/type_module:anydataWithMandatoryChild",
++                    "/type_module:anyxmlBasic",
++                    "/type_module:anyxmlWithMandatoryChild",
++                    // choiceOnModule is a choice, so it doesn't have path "/type_module:choiceOnModule".
++                    // This node is tested at the end of the test subcase.
++                    "/",
++                    "/type_module:choiceBasicContainer",
++                    "/type_module:choiceWithMandatoryContainer",
++                    "/type_module:choiceWithDefaultContainer",
++                    "/type_module:implicitCaseContainer",
++                    "/type_module:leafBinary",
++                    "/type_module:leafBits",
++                    "/type_module:leafEnum",
++                    "/type_module:leafEnum2",
++                    "/type_module:leafNumber",
++                    "/type_module:leafRef",
++                    "/type_module:leafRefRelaxed",
++                    "/type_module:leafString",
++                    "/type_module:leafUnion",
++                    "/type_module:meal",
++                    "/type_module:leafWithConfigFalse",
++                    "/type_module:leafWithDefaultValue",
++                    "/type_module:leafWithDescription",
++                    "/type_module:leafWithMandatoryTrue",
++                    "/type_module:leafWithStatusDeprecated",
++                    "/type_module:leafWithStatusObsolete",
++                    "/type_module:leafWithUnits",
++                    "/type_module:iid-valid",
++                    "/type_module:iid-relaxed",
++                    "/type_module:leafListBasic",
++                    "/type_module:leafListWithDefault",
++                    "/type_module:leafListWithMinMaxElements",
++                    "/type_module:leafListWithUnits",
++                    "/type_module:listBasic",
++                    "/type_module:listAdvancedWithOneKey",
++                    "/type_module:listAdvancedWithTwoKey",
++                    "/type_module:listWithMinMaxElements",
++                    "/type_module:numeric",
++                    "/type_module:container",
++                    "/type_module:containerWithMandatoryChild",
++                };
++                children = ctx->getModule("type_module", std::nullopt)->immediateChildren();
++
++                std::vector<std::string> actualNames;
++                for (auto it : children.value()) {
++                    actualNames.emplace_back(it.name());
++                }
++                // choiceOnModule is a choice, so it doesn't have path, just name.
++                REQUIRE(actualNames[4] == "choiceOnModule");
++            }
++
++            std::vector<std::string> actualPaths;
++            for (const auto& it : *children) {
++                actualPaths.emplace_back(it.path());
++            }
++            REQUIRE(actualPaths == expectedPaths);
+         }
+-        DOCTEST_SUBCASE("two items")
++
++        DOCTEST_SUBCASE("unimplemented module")
+         {
+-            expectedPaths = {
+-                "/type_module:container/x/x1",
+-                "/type_module:container/x/x2",
+-            };
+-            path = "/type_module:container/x";
+-        }
+-        std::vector<std::string> actualPaths;
+-        for (const auto& it : ctx->findPath(path).immediateChildren()) {
+-            actualPaths.emplace_back(it.path());
++            DOCTEST_SUBCASE("Module::immediateChildren")
++            {
++                ctx->setSearchDir(TESTS_DIR / "yang");
++                auto modYangPatch = ctx->loadModule("ietf-yang-patch", std::nullopt);
++                auto modRestconf = ctx->getModule("ietf-restconf", "2017-01-26");
++                REQUIRE(!modRestconf->implemented());
++                REQUIRE_THROWS_WITH_AS(modRestconf->immediateChildren(), "Module::child: module is not implemented", libyang::Error);
++            }
+         }
+-        REQUIRE(actualPaths == expectedPaths);
+     }
+ 
+     DOCTEST_SUBCASE("SchemaNode::siblings")
+-- 
+2.43.0
+

package/libyang-cpp/0009-upstream-stopped-reporting-schema-mounts-node.patch

@@ -1,11 +1,11 @@
 From 39c7530caa510144c17521278b721ba1e6d8ff40 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Thu, 9 Jan 2025 15:31:37 +0100
-Subject: [PATCH 8/8] upstream stopped reporting schema-mounts node
+Subject: [PATCH 09/18] upstream stopped reporting schema-mounts node
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Change-Id: I940769d38d56fcfda3e1408c92331fdb00c161e9
 Signed-off-by: Mattias Walström <lazzer@gmail.com>

package/libyang-cpp/0010-CI-temporarily-pin-version-due-to-anyxml-behavior-ch.patch

@@ -0,0 +1,39 @@
+From 82c963766ad4e4a802db7be656acbedb640745e9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 30 Jan 2025 16:34:12 +0100
+Subject: [PATCH 10/18] CI: temporarily pin version due to anyxml behavior
+ changes upstream
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: Id977f4d045098c1b93656c0efb871c9a1b650e2d
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ .zuul.yaml | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/.zuul.yaml b/.zuul.yaml
+index b41c490..19f0def 100644
+--- a/.zuul.yaml
++++ b/.zuul.yaml
+@@ -4,13 +4,13 @@
+         - f38-gcc-cover:
+             required-projects:
+               - name: github/CESNET/libyang
+-                override-checkout: devel
++                override-checkout: cesnet/2025-01-29
+               - name: github/onqtam/doctest
+                 override-checkout: v2.3.6
+         - f38-clang-asan-ubsan:
+             required-projects: &projects
+               - name: github/CESNET/libyang
+-                override-checkout: devel
++                override-checkout: cesnet/2025-01-29
+               - name: github/onqtam/doctest
+                 override-checkout: v2.4.11
+         - f38-clang-tsan:
+-- 
+2.43.0
+

package/libyang-cpp/0011-build-a-single-place-to-define-package-version.patch

@@ -0,0 +1,40 @@
+From 50a216e35a555961f94a32a71bb2d45ac611d0aa Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Wed, 29 Jan 2025 22:49:08 +0100
+Subject: [PATCH 11/18] build: a single place to define package version
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I2cd7397895ed4852f852e99b97543dde76eaff8f
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 732f52b..c518ca8 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -21,7 +21,8 @@ add_custom_target(libyang-cpp-version-cmake
+         cmake/ProjectGitVersionRunner.cmake
+         )
+ include(cmake/ProjectGitVersion.cmake)
+-prepare_git_version(LIBYANG_CPP_VERSION "3")
++set(LIBYANG_CPP_PKG_VERSION "3")
++prepare_git_version(LIBYANG_CPP_VERSION ${LIBYANG_CPP_PKG_VERSION})
+ 
+ find_package(Doxygen)
+ option(WITH_DOCS "Create and install internal documentation (needs Doxygen)" ${DOXYGEN_FOUND})
+@@ -29,7 +30,6 @@ option(BUILD_SHARED_LIBS "By default, shared libs are enabled. Turn off for a st
+ 
+ find_package(PkgConfig REQUIRED)
+ pkg_check_modules(LIBYANG REQUIRED libyang>=3.7.8 IMPORTED_TARGET)
+-set(LIBYANG_CPP_PKG_VERSION "3")
+ 
+ # FIXME from gcc 14.1 on we should be able to use the calendar/time from libstdc++ and thus remove the date dependency
+ find_package(date)
+-- 
+2.43.0
+

package/libyang-cpp/0012-YANG-flavored-regular-expressions.patch

@@ -0,0 +1,173 @@
+From 1533458346b4f395b1187c646b61bbcb1fddc615 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Mon, 4 Nov 2024 14:52:12 +0100
+Subject: [PATCH 12/18] YANG-flavored regular expressions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I93b2756d0f470585280c076308df3f384bd7765d
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt                |  3 +++
+ include/libyang-cpp/Regex.hpp | 28 ++++++++++++++++++++++
+ src/Regex.cpp                 | 45 +++++++++++++++++++++++++++++++++++
+ tests/regex.cpp               | 30 +++++++++++++++++++++++
+ 4 files changed, 106 insertions(+)
+ create mode 100644 include/libyang-cpp/Regex.hpp
+ create mode 100644 src/Regex.cpp
+ create mode 100644 tests/regex.cpp
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index c518ca8..512af8c 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -54,6 +54,7 @@ add_library(yang-cpp
+     src/Enum.cpp
+     src/Collection.cpp
+     src/Module.cpp
++    src/Regex.cpp
+     src/SchemaNode.cpp
+     src/Set.cpp
+     src/Type.cpp
+@@ -83,6 +84,7 @@ if(${CMAKE_VERSION} VERSION_GREATER_EQUAL "3.24")
+             libyang-cpp/Enum.hpp
+             libyang-cpp/ChildInstantiables.hpp
+             libyang-cpp/Module.hpp
++            libyang-cpp/Regex.hpp
+             libyang-cpp/Set.hpp
+             libyang-cpp/SchemaNode.hpp
+             libyang-cpp/Time.hpp
+@@ -119,6 +121,7 @@ if(BUILD_TESTING)
+     libyang_cpp_test(schema_node)
+     libyang_cpp_test(unsafe)
+     target_link_libraries(test_unsafe PkgConfig::LIBYANG)
++    libyang_cpp_test(regex)
+ 
+     if(date_FOUND)
+         add_executable(test_time-stl-hhdate tests/time.cpp)
+diff --git a/include/libyang-cpp/Regex.hpp b/include/libyang-cpp/Regex.hpp
+new file mode 100644
+index 0000000..31935f2
+--- /dev/null
++++ b/include/libyang-cpp/Regex.hpp
+@@ -0,0 +1,28 @@
++/*
++ * Copyright (C) 2025 CESNET, https://photonics.cesnet.cz/
++ *
++ * Written by Jan Kundrát <jan.kundrat@cesnet.cz>
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++#pragma once
++#include <libyang-cpp/export.h>
++#include <string>
++
++namespace libyang {
++class Context;
++
++/**
++ * @brief A regular expression pattern which uses the YANG-flavored regex engine
++ */
++class LIBYANG_CPP_EXPORT Regex {
++public:
++    Regex(const std::string& pattern);
++    ~Regex();
++    bool matches(const std::string& input);
++
++private:
++    void* code;
++};
++
++}
+diff --git a/src/Regex.cpp b/src/Regex.cpp
+new file mode 100644
+index 0000000..a34fcd5
+--- /dev/null
++++ b/src/Regex.cpp
+@@ -0,0 +1,45 @@
++/*
++ * Copyright (C) 2025 CESNET, https://photonics.cesnet.cz/
++ *
++ * Written by Jan Kundrát <jan.kundrat@cesnet.cz>
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++// The following header MUST be included before anything else which "might" use PCRE2
++// because that library uses the preprocessor to prepare the "correct" versions of symbols.
++#include <libyang/tree_data.h>
++
++#include <libyang-cpp/Regex.hpp>
++#include <pcre2.h>
++#include "utils/exception.hpp"
++
++#define THE_PCRE2_CODE_P reinterpret_cast<pcre2_code*>(this->code)
++#define THE_PCRE2_CODE_P_P reinterpret_cast<pcre2_code**>(&this->code)
++
++namespace libyang {
++
++Regex::Regex(const std::string& pattern)
++    : code(nullptr)
++{
++    auto res = ly_pattern_compile(nullptr, pattern.c_str(), THE_PCRE2_CODE_P_P);
++    throwIfError(res, ly_last_logmsg());
++}
++
++Regex::~Regex()
++{
++    pcre2_code_free(THE_PCRE2_CODE_P);
++}
++
++bool Regex::matches(const std::string& input)
++{
++    auto res = ly_pattern_match(nullptr, nullptr /* we have a precompiled pattern */, input.c_str(), input.size(), THE_PCRE2_CODE_P_P);
++    if (res == LY_SUCCESS) {
++        return true;
++    } else if (res == LY_ENOT) {
++        return false;
++    } else {
++        throwError(res, ly_last_logmsg());
++    }
++}
++}
+diff --git a/tests/regex.cpp b/tests/regex.cpp
+new file mode 100644
+index 0000000..7594f43
+--- /dev/null
++++ b/tests/regex.cpp
+@@ -0,0 +1,30 @@
++/*
++ * Copyright (C) 2025 CESNET, https://photonics.cesnet.cz/
++ *
++ * Written by Jan Kundrát <jan.kundrat@cesnet.cz>
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#include <doctest/doctest.h>
++#include <libyang-cpp/Regex.hpp>
++#include <libyang-cpp/Utils.hpp>
++
++TEST_CASE("regex")
++{
++    using libyang::Regex;
++    using namespace std::string_literals;
++
++    REQUIRE_THROWS_WITH_AS(Regex{"\\"}, R"(Regular expression "\" is not valid ("": \ at end of pattern).: LY_EVALID)", libyang::ErrorWithCode);
++
++    Regex re{"ahoj"};
++    REQUIRE(re.matches("ahoj"));
++    REQUIRE(!re.matches("cau"));
++    REQUIRE(re.matches("ahoj")); // test repeated calls as well
++    REQUIRE(!re.matches("oj"));
++    REQUIRE(!re.matches("aho"));
++
++    // Testing runtime errors during pattern *matching* is tricky. There's a limit on backtracking,
++    // so testing a pattern like x+x+y on an obscenely long string of "x" characters *will* do the trick, eventually,
++    // but the PCRE2 library has a default limit of 10M attempts. That's a VERY big number to hit during a test :(.
++}
+-- 
+2.43.0
+

package/libyang-cpp/0013-Adapt-to-upstream-changes-in-anyxml-JSON-printing.patch

@@ -0,0 +1,67 @@
+From 8d406728a53c2e77a4fe7393b7e30d42b8f9b9bb Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 30 Jan 2025 15:40:22 +0100
+Subject: [PATCH 13/18] Adapt to upstream changes in anyxml JSON printing
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I5f6de28cebc95a446549017c2768b450f4fd6526
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ .zuul.yaml          | 4 ++--
+ CMakeLists.txt      | 3 ++-
+ tests/data_node.cpp | 2 +-
+ 3 files changed, 5 insertions(+), 4 deletions(-)
+
+diff --git a/.zuul.yaml b/.zuul.yaml
+index 19f0def..b41c490 100644
+--- a/.zuul.yaml
++++ b/.zuul.yaml
+@@ -4,13 +4,13 @@
+         - f38-gcc-cover:
+             required-projects:
+               - name: github/CESNET/libyang
+-                override-checkout: cesnet/2025-01-29
++                override-checkout: devel
+               - name: github/onqtam/doctest
+                 override-checkout: v2.3.6
+         - f38-clang-asan-ubsan:
+             required-projects: &projects
+               - name: github/CESNET/libyang
+-                override-checkout: cesnet/2025-01-29
++                override-checkout: devel
+               - name: github/onqtam/doctest
+                 override-checkout: v2.4.11
+         - f38-clang-tsan:
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 512af8c..a40fd52 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -29,7 +29,8 @@ option(WITH_DOCS "Create and install internal documentation (needs Doxygen)" ${D
+ option(BUILD_SHARED_LIBS "By default, shared libs are enabled. Turn off for a static build." ON)
+ 
+ find_package(PkgConfig REQUIRED)
+-pkg_check_modules(LIBYANG REQUIRED libyang>=3.7.8 IMPORTED_TARGET)
++# FIXME: it's actually 3.7.12, but that hasn't been released yet
++pkg_check_modules(LIBYANG REQUIRED libyang>=3.7.11 IMPORTED_TARGET)
+ 
+ # FIXME from gcc 14.1 on we should be able to use the calendar/time from libstdc++ and thus remove the date dependency
+ find_package(date)
+diff --git a/tests/data_node.cpp b/tests/data_node.cpp
+index 45fd6c1..14470dd 100644
+--- a/tests/data_node.cpp
++++ b/tests/data_node.cpp
+@@ -1568,7 +1568,7 @@ TEST_CASE("Data Node manipulation")
+                 REQUIRE(*jsonAnyXmlNode.createdNode->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::Shrink | libyang::PrintFlags::WithSiblings)
+                         == R"|({"example-schema:ax":[1,2,3]})|"s);
+                 REQUIRE(*jsonAnyXmlNode.createdNode->printStr(libyang::DataFormat::XML, libyang::PrintFlags::Shrink | libyang::PrintFlags::WithSiblings)
+-                        == R"|(<ax xmlns="http://example.com/coze"/>)|"s);
++                        == R"|(<ax xmlns="http://example.com/coze">)|"s + origJSON + "</ax>");
+             }
+ 
+             REQUIRE(!!val);
+-- 
+2.43.0
+

package/libyang-cpp/0014-fix-DataNode-insertSibling-return-value.patch

@@ -0,0 +1,57 @@
+From f050e7e4a17ef2e221ca000a544042c33c9541fc Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 13 Mar 2025 19:21:26 +0100
+Subject: [PATCH 14/18] fix DataNode::insertSibling() return value
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+When such an insert happens, the C library returns the node which is now
+the first sibling among all of the siblings of the node which was used
+as a reference during the insert. Our API was also documented this way,
+but we were not doing that.
+
+Reported-by: Irfan <irfan.haslanded@gmail.com>
+Bug: https://github.com/CESNET/libyang-cpp/issues/29
+Change-Id: Id7f84a31e50212d6e2cbce9ab03a351a3721f767
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/DataNode.cpp    | 2 +-
+ tests/data_node.cpp | 7 +++++++
+ 2 files changed, 8 insertions(+), 1 deletion(-)
+
+diff --git a/src/DataNode.cpp b/src/DataNode.cpp
+index 84591e5..b899b18 100644
+--- a/src/DataNode.cpp
++++ b/src/DataNode.cpp
+@@ -711,7 +711,7 @@ DataNode DataNode::insertSibling(DataNode toInsert)
+         lyd_insert_sibling(this->m_node, toInsert.m_node, &firstSibling);
+     }, toInsert.parent() ? OperationScope::JustThisNode : OperationScope::AffectsFollowingSiblings, m_refs);
+ 
+-    return DataNode{m_node, m_refs};
++    return DataNode{firstSibling, m_refs};
+ }
+ 
+ /**
+diff --git a/tests/data_node.cpp b/tests/data_node.cpp
+index 14470dd..b6ee455 100644
+--- a/tests/data_node.cpp
++++ b/tests/data_node.cpp
+@@ -973,6 +973,13 @@ TEST_CASE("Data Node manipulation")
+         REQUIRE(getNumberOrder() == expected);
+     }
+ 
++    DOCTEST_SUBCASE("DataNode::insertSibling")
++    {
++        auto node = ctx.newPath("/example-schema:leafUInt8", "10");
++        REQUIRE(node.insertSibling(ctx.newPath("/example-schema:leafUInt16", "10")).path() == "/example-schema:leafUInt8");
++        REQUIRE(node.insertSibling(ctx.newPath("/example-schema:dummy", "10")).path() == "/example-schema:dummy");
++    }
++
+     DOCTEST_SUBCASE("DataNode::duplicate")
+     {
+         auto root = ctx.parseData(data2, libyang::DataFormat::JSON);
+-- 
+2.43.0
+

package/libyang-cpp/0015-API-ABI-change-opaque-node-naming.patch

@@ -0,0 +1,260 @@
+From f958af42bf5d9fbd901ed59ebc1359ac0ddcc00f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Fri, 14 Mar 2025 11:36:50 +0100
+Subject: [PATCH 15/18] API/ABI change: opaque node naming
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Our C++ API would ignore the "module name or XML prefix", which turns
+out to be *the* relevant part when it comes to opaque node naming. The
+prefix is, instead, just that string that might have been inherited from
+the parent node when parsing the serialized data; it's an optional
+thingy which, if not set explicitly, is implicitly inherited.
+
+Adapt the API for this, and since this *will* break the build, let's
+bump the package version.
+
+Change-Id: I199afe5fa7a571034b744531c63b93b9c656563a
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt                   |  5 ++---
+ include/libyang-cpp/Context.hpp  |  4 ++--
+ include/libyang-cpp/DataNode.hpp | 11 ++++++++--
+ src/Context.cpp                  | 32 ++++++++++++++++++++--------
+ src/DataNode.cpp                 | 19 ++++++++++++++---
+ tests/data_node.cpp              | 36 ++++++++++++++++++++++++++------
+ 6 files changed, 82 insertions(+), 25 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index a40fd52..c5fec45 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -21,7 +21,7 @@ add_custom_target(libyang-cpp-version-cmake
+         cmake/ProjectGitVersionRunner.cmake
+         )
+ include(cmake/ProjectGitVersion.cmake)
+-set(LIBYANG_CPP_PKG_VERSION "3")
++set(LIBYANG_CPP_PKG_VERSION "4")
+ prepare_git_version(LIBYANG_CPP_VERSION ${LIBYANG_CPP_PKG_VERSION})
+ 
+ find_package(Doxygen)
+@@ -29,8 +29,7 @@ option(WITH_DOCS "Create and install internal documentation (needs Doxygen)" ${D
+ option(BUILD_SHARED_LIBS "By default, shared libs are enabled. Turn off for a static build." ON)
+ 
+ find_package(PkgConfig REQUIRED)
+-# FIXME: it's actually 3.7.12, but that hasn't been released yet
+-pkg_check_modules(LIBYANG REQUIRED libyang>=3.7.11 IMPORTED_TARGET)
++pkg_check_modules(LIBYANG REQUIRED libyang>=3.10.1 IMPORTED_TARGET)
+ 
+ # FIXME from gcc 14.1 on we should be able to use the calendar/time from libstdc++ and thus remove the date dependency
+ find_package(date)
+diff --git a/include/libyang-cpp/Context.hpp b/include/libyang-cpp/Context.hpp
+index baa47b3..ca89063 100644
+--- a/include/libyang-cpp/Context.hpp
++++ b/include/libyang-cpp/Context.hpp
+@@ -115,8 +115,8 @@ public:
+     CreatedNodes newPath2(const std::string& path, libyang::JSON json, const std::optional<CreationOptions> options = std::nullopt) const;
+     CreatedNodes newPath2(const std::string& path, libyang::XML xml, const std::optional<CreationOptions> options = std::nullopt) const;
+     std::optional<DataNode> newExtPath(const ExtensionInstance& ext, const std::string& path, const std::optional<std::string>& value, const std::optional<CreationOptions> options = std::nullopt) const;
+-    std::optional<DataNode> newOpaqueJSON(const std::string& moduleName, const std::string& name, const std::optional<libyang::JSON>& value) const;
+-    std::optional<DataNode> newOpaqueXML(const std::string& moduleName, const std::string& name, const std::optional<libyang::XML>& value) const;
++    std::optional<DataNode> newOpaqueJSON(const OpaqueName& name, const std::optional<libyang::JSON>& value) const;
++    std::optional<DataNode> newOpaqueXML(const OpaqueName& name, const std::optional<libyang::XML>& value) const;
+     SchemaNode findPath(const std::string& dataPath, const InputOutputNodes inputOutputNodes = InputOutputNodes::Input) const;
+     Set<SchemaNode> findXPath(const std::string& path) const;
+ 
+diff --git a/include/libyang-cpp/DataNode.hpp b/include/libyang-cpp/DataNode.hpp
+index 851681b..310b5e3 100644
+--- a/include/libyang-cpp/DataNode.hpp
++++ b/include/libyang-cpp/DataNode.hpp
+@@ -225,15 +225,22 @@ private:
+ };
+ 
+ /**
+- * @brief Contains a (possibly module-qualified) name of an opaque node.
++ * @brief Contains a name of an opaque node.
+  *
+- * This is generic container of a prefix/module string and a name string.
++ * An opaque node always has a name, and a module (or XML namespace) to which this node belongs.
++ * Sometimes, it also has a prefix.
++ *
++ * If the prefix is set *and* the underlying node is an opaque JSON one, then the prefix must be the same as the "module or namespace" name.
++ * If the underlying node is an opaque XML one, then the XML prefix might be something completely different, and in that case the real fun begins.
++ * Review the libayng C manual, this is something that the C++ wrapper doesn't really have under control.
+  *
+  * Wraps `ly_opaq_name`.
+  */
+ struct LIBYANG_CPP_EXPORT OpaqueName {
++    std::string moduleOrNamespace;
+     std::optional<std::string> prefix;
+     std::string name;
++    std::string pretty() const;
+ };
+ 
+ /**
+diff --git a/src/Context.cpp b/src/Context.cpp
+index 287f8c8..fec2f27 100644
+--- a/src/Context.cpp
++++ b/src/Context.cpp
+@@ -378,17 +378,25 @@ std::optional<DataNode> Context::newExtPath(const ExtensionInstance& ext, const
+  *
+  * Wraps `lyd_new_opaq`.
+  *
+- * @param moduleName Node module name, used as a prefix as well
+  * @param name Name of the created node
+  * @param value JSON data blob, if any
+  * @return Returns the newly created node (if created)
+  */
+-std::optional<DataNode> Context::newOpaqueJSON(const std::string& moduleName, const std::string& name, const std::optional<libyang::JSON>& value) const
++std::optional<DataNode> Context::newOpaqueJSON(const OpaqueName& name, const std::optional<libyang::JSON>& value) const
+ {
++    if (name.prefix && *name.prefix != name.moduleOrNamespace) {
++        throw Error{"invalid opaque JSON node: prefix \"" + *name.prefix + "\" doesn't match module name \"" + name.moduleOrNamespace + "\""};
++    }
+     lyd_node* out;
+-    auto err = lyd_new_opaq(nullptr, m_ctx.get(), name.c_str(), value ? value->content.c_str() : nullptr, nullptr, moduleName.c_str(), &out);
++    auto err = lyd_new_opaq(nullptr,
++                            m_ctx.get(),
++                            name.name.c_str(),
++                            value ? value->content.c_str() : nullptr,
++                            name.prefix ? name.prefix->c_str() : nullptr,
++                            name.moduleOrNamespace.c_str(),
++                            &out);
+ 
+-    throwIfError(err, "Couldn't create an opaque JSON node '"s + moduleName + ':' + name + "'");
++    throwIfError(err, "Couldn't create an opaque JSON node " + name.pretty());
+ 
+     if (out) {
+         return DataNode{out, std::make_shared<internal_refcount>(m_ctx)};
+@@ -403,17 +411,23 @@ std::optional<DataNode> Context::newOpaqueJSON(const std::string& moduleName, co
+  *
+  * Wraps `lyd_new_opaq2`.
+  *
+- * @param xmlNamespace Node module namespace
+  * @param name Name of the created node
+  * @param value XML data blob, if any
+  * @return Returns the newly created node (if created)
+  */
+-std::optional<DataNode> Context::newOpaqueXML(const std::string& xmlNamespace, const std::string& name, const std::optional<libyang::XML>& value) const
++std::optional<DataNode> Context::newOpaqueXML(const OpaqueName& name, const std::optional<libyang::XML>& value) const
+ {
++    // the XML node naming is "complex", we cannot really check the XML namespace for sanity here
+     lyd_node* out;
+-    auto err = lyd_new_opaq2(nullptr, m_ctx.get(), name.c_str(), value ? value->content.c_str() : nullptr, nullptr, xmlNamespace.c_str(), &out);
+-
+-    throwIfError(err, "Couldn't create an opaque XML node '"s + name +"' from namespace '" + xmlNamespace + "'");
++    auto err = lyd_new_opaq2(nullptr,
++                             m_ctx.get(),
++                             name.name.c_str(),
++                             value ? value->content.c_str() : nullptr,
++                             name.prefix ? name.prefix->c_str() : nullptr,
++                             name.moduleOrNamespace.c_str(),
++                             &out);
++
++    throwIfError(err, "Couldn't create an opaque XML node " + name.pretty());
+ 
+     if (out) {
+         return DataNode{out, std::make_shared<internal_refcount>(m_ctx)};
+diff --git a/src/DataNode.cpp b/src/DataNode.cpp
+index b899b18..344f1b6 100644
+--- a/src/DataNode.cpp
++++ b/src/DataNode.cpp
+@@ -1112,9 +1112,9 @@ OpaqueName DataNodeOpaque::name() const
+ {
+     auto opaq = reinterpret_cast<lyd_node_opaq*>(m_node);
+     return OpaqueName{
+-        .prefix = opaq->name.prefix ? std::optional(opaq->name.prefix) : std::nullopt,
+-        .name = opaq->name.name
+-    };
++        .moduleOrNamespace = opaq->name.module_name,
++        .prefix = opaq->name.prefix ? std::optional{opaq->name.prefix} : std::nullopt,
++        .name = opaq->name.name};
+ }
+ 
+ std::string DataNodeOpaque::value() const
+@@ -1122,6 +1122,19 @@ std::string DataNodeOpaque::value() const
+     return reinterpret_cast<lyd_node_opaq*>(m_node)->value;
+ }
+ 
++std::string OpaqueName::pretty() const
++{
++    if (prefix) {
++        if (*prefix == moduleOrNamespace) {
++            return *prefix + ':' + name;
++        } else {
++            return "{" + moduleOrNamespace + "}, " + *prefix + ':' + name;
++        }
++    } else {
++        return "{" + moduleOrNamespace + "}, " + name;
++    }
++}
++
+ /**
+  * Wraps a raw non-null lyd_node pointer.
+  * @param node The pointer to be wrapped. Must not be null.
+diff --git a/tests/data_node.cpp b/tests/data_node.cpp
+index b6ee455..a1096a6 100644
+--- a/tests/data_node.cpp
++++ b/tests/data_node.cpp
+@@ -1969,9 +1969,11 @@ TEST_CASE("Data Node manipulation")
+ 
+         DOCTEST_SUBCASE("opaque nodes for sysrepo ops data discard")
+         {
+-            auto discard1 = ctx.newOpaqueJSON("sysrepo", "discard-items", libyang::JSON{"/example-schema:a"});
++            // the "short" form with no prefix
++            auto discard1 = ctx.newOpaqueJSON(libyang::OpaqueName{"sysrepo", std::nullopt, "discard-items"}, libyang::JSON{"/example-schema:a"});
+             REQUIRE(!!discard1);
+-            auto discard2 = ctx.newOpaqueJSON("sysrepo", "discard-items", libyang::JSON{"/example-schema:b"});
++            // let's use a prefix form here
++            auto discard2 = ctx.newOpaqueJSON(libyang::OpaqueName{"sysrepo", "sysrepo", "discard-items"}, libyang::JSON{"/example-schema:b"});
+             REQUIRE(!!discard2);
+             discard1->insertSibling(*discard2);
+             REQUIRE(*discard1->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings)
+@@ -2001,16 +2003,38 @@ TEST_CASE("Data Node manipulation")
+             auto data = ctx.newPath2("/example-schema:myRpc/outputLeaf", "AHOJ", libyang::CreationOptions::Output).createdNode;
+             REQUIRE(data);
+             data->newPath("/example-schema:myRpc/another", "yay", libyang::CreationOptions::Output);
++            std::string prettyName;
+ 
+-            DOCTEST_SUBCASE("JSON") {
+-                out = ctx.newOpaqueJSON(data->schema().module().name(), "output", std::nullopt);
++            DOCTEST_SUBCASE("JSON no prefix") {
++                out = ctx.newOpaqueJSON({data->schema().module().name(), std::nullopt, "output"}, std::nullopt);
++                prettyName = "{example-schema}, output";
+             }
+ 
+-            DOCTEST_SUBCASE("XML") {
+-                out = ctx.newOpaqueXML(data->schema().module().ns(), "output", std::nullopt);
++            DOCTEST_SUBCASE("JSON with prefix") {
++                out = ctx.newOpaqueJSON({data->schema().module().name(), data->schema().module().name(), "output"}, std::nullopt);
++                prettyName = "example-schema:output";
++
++                // wrong prefix is detected
++                REQUIRE_THROWS_WITH_AS(ctx.newOpaqueJSON({data->schema().module().name(), "xxx", "output"}, std::nullopt),
++                                       R"(invalid opaque JSON node: prefix "xxx" doesn't match module name "example-schema")",
++                                       libyang::Error);
++            }
++
++            DOCTEST_SUBCASE("XML no prefix") {
++                out = ctx.newOpaqueXML({data->schema().module().ns(), std::nullopt, "output"}, std::nullopt);
++                prettyName = "{http://example.com/coze}, output";
++            }
++
++            DOCTEST_SUBCASE("XML with prefix") {
++                out = ctx.newOpaqueXML({data->schema().module().ns(),
++                                        data->schema().module().name() /* prefix is a module name, not the XML NS*/,
++                                        "output"},
++                                       std::nullopt);
++                prettyName = "{http://example.com/coze}, example-schema:output";
+             }
+ 
+             REQUIRE(out);
++            REQUIRE(prettyName == out->asOpaque().name().pretty());
+             data->unlinkWithSiblings();
+             out->insertChild(*data);
+ 
+-- 
+2.43.0
+

package/libyang-cpp/0016-Add-a-helper-for-finding-opaque-nodes.patch

@@ -0,0 +1,462 @@
+From 8c59ecc5c687f8ee2ce62825835a378b422185f2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Fri, 14 Mar 2025 13:41:01 +0100
+Subject: [PATCH 16/18] Add a helper for finding opaque nodes
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+This is needed for sysrepo where we want to search through the
+sysrepo:discard-items top-level opaque nodes.
+
+At first I wanted to simply wrap lyd_find_sibling_opaq_next(), but its
+semantics is quite different to what is needed in the code which uses
+sysrepo, so here's my attempt at a nice-ish API.
+
+Change-Id: I2571961e42f6d7a121e27c881cacdcfec0e87762
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ include/libyang-cpp/DataNode.hpp   |   2 +
+ src/DataNode.cpp                   |  49 ++++++
+ tests/data_node.cpp                |  74 +++++++++
+ tests/yang/sysrepo@2024-10-25.yang | 257 +++++++++++++++++++++++++++++
+ 4 files changed, 382 insertions(+)
+ create mode 100644 tests/yang/sysrepo@2024-10-25.yang
+
+diff --git a/include/libyang-cpp/DataNode.hpp b/include/libyang-cpp/DataNode.hpp
+index 310b5e3..50d6c0e 100644
+--- a/include/libyang-cpp/DataNode.hpp
++++ b/include/libyang-cpp/DataNode.hpp
+@@ -102,6 +102,7 @@ public:
+ 
+     bool isOpaque() const;
+     DataNodeOpaque asOpaque() const;
++    std::optional<DataNodeOpaque> firstOpaqueSibling() const;
+ 
+     // TODO: allow setting the `parent` argument
+     DataNode duplicate(const std::optional<DuplicationOptions> opts = std::nullopt) const;
+@@ -241,6 +242,7 @@ struct LIBYANG_CPP_EXPORT OpaqueName {
+     std::optional<std::string> prefix;
+     std::string name;
+     std::string pretty() const;
++    bool matches(const std::string& prefixIsh, const std::string& name) const;
+ };
+ 
+ /**
+diff --git a/src/DataNode.cpp b/src/DataNode.cpp
+index 344f1b6..7e87917 100644
+--- a/src/DataNode.cpp
++++ b/src/DataNode.cpp
+@@ -1135,6 +1135,20 @@ std::string OpaqueName::pretty() const
+     }
+ }
+ 
++/**
++ * @short Fuzzy-match a real-world name against a combination of "something like a prefix" and "unqualified name"
++ *
++ * Because libyang doesn't propagate inherited prefixes, and because opaque nodes are magic, we seem to require
++ * this "fuzzy matching". It won't properly report a match on opaque nodes with a prefix that's inherited when
++ * using XML namespaces, though.
++ * */
++bool OpaqueName::matches(const std::string& prefixIsh, const std::string& name) const
++{
++    return name == this->name
++        && (prefixIsh == moduleOrNamespace
++            || (!!prefix && prefixIsh == *prefix));
++}
++
+ /**
+  * Wraps a raw non-null lyd_node pointer.
+  * @param node The pointer to be wrapped. Must not be null.
+@@ -1305,4 +1319,39 @@ bool DataNode::siblingsEqual(const libyang::DataNode& other, const DataCompare f
+     }
+ }
+ 
++/**
++ * @short Find the first opaque node among the siblings
++ *
++ * This function was inspired by `lyd_find_sibling_opaq_next()`.
++ * */
++std::optional<DataNodeOpaque> DataNode::firstOpaqueSibling() const
++{
++    struct lyd_node *candidate = m_node;
++
++    // Skip all non-opaque nodes; libyang guarantees to have them first, followed by a (possibly empty) set
++    // of opaque nodes. This is not documented anywhere, but it was explicitly confirmed by the maintainer:
++    //
++    // JK: can I rely on all non-opaque nodes being listed first among the siblings, and then all opaque nodes
++    // in one continuous sequence (but with an unspecified order among the opaque nodes themselves)?
++    //
++    // MV: yep
++    while (candidate && candidate->schema) {
++        candidate = candidate->next;
++    }
++
++    // walk back through the opaque nodes; however, libyang lists are not your regular linked lists
++    while (candidate
++           && !candidate->prev->schema // don't go from the first opaque node through the non-opaque ones
++           && candidate->prev->next // don't wrap from the first node to the last one in case all of them are opaque
++    ) {
++        candidate = candidate->prev;
++    }
++
++    if (candidate) {
++        return DataNode{candidate, m_refs}.asOpaque();
++    }
++
++    return std::nullopt;
++}
++
+ }
+diff --git a/tests/data_node.cpp b/tests/data_node.cpp
+index a1096a6..db5a28e 100644
+--- a/tests/data_node.cpp
++++ b/tests/data_node.cpp
+@@ -1982,6 +1982,80 @@ TEST_CASE("Data Node manipulation")
+   "sysrepo:discard-items": "/example-schema:b"
+ }
+ )");
++
++            // check that a list which only consists of opaque nodes doesn't break our iteration
++            REQUIRE(!!discard1->firstOpaqueSibling());
++            REQUIRE(*discard1->firstOpaqueSibling() == *discard1);
++            REQUIRE(!!discard2->firstOpaqueSibling());
++            REQUIRE(*discard2->firstOpaqueSibling() == *discard1);
++
++            auto leafInt16 = ctx.newPath("/example-schema:leafInt16", "666");
++            leafInt16.insertSibling(*discard1);
++            REQUIRE(*discard1->firstSibling().printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings)
++                    == R"({
++  "example-schema:leafInt16": 666,
++  "sysrepo:discard-items": "/example-schema:a",
++  "sysrepo:discard-items": "/example-schema:b"
++}
++)");
++            REQUIRE(leafInt16.firstSibling().path() == "/example-schema:leafInt16");
++            REQUIRE(discard1->firstSibling().path() == "/example-schema:leafInt16");
++            REQUIRE(discard2->firstSibling().path() == "/example-schema:leafInt16");
++
++            auto dummy = ctx.newPath("/example-schema:dummy", "blah");
++            auto opaqueLeaf = ctx.newPath("/example-schema:leafInt32", std::nullopt, libyang::CreationOptions::Opaque);
++            opaqueLeaf.newAttrOpaqueJSON("ietf-netconf", "operation", "delete");
++            dummy.insertSibling(opaqueLeaf);
++
++            // FIXME reword this: this one might not be handled by sysrepo, but we want it for our fuzzy matcher testing anyway
++            auto discard3 = ctx.newOpaqueXML(libyang::OpaqueName{"http://www.sysrepo.org/yang/sysrepo", "sysrepo", "discard-items"}, libyang::XML{"/example-schema:c"});
++            REQUIRE(!!discard3);
++            // notice that it's printed without a proper prefix at first...
++            REQUIRE(*discard3->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::Shrink)
++                    == R"({"discard-items":"/example-schema:c"})");
++            // ...but after loading the module, the proper module is added back
++            ctx.parseModule(TESTS_DIR / "yang" / "sysrepo@2024-10-25.yang", libyang::SchemaFormat::YANG);
++            REQUIRE(*discard3->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::Shrink)
++                    == R"({"sysrepo:discard-items":"/example-schema:c"})");
++
++            dummy.insertSibling(*discard3);
++            leafInt16.insertSibling(dummy);
++            REQUIRE(*discard1->firstSibling().printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings)
++                    == R"({
++  "example-schema:dummy": "blah",
++  "example-schema:leafInt16": 666,
++  "sysrepo:discard-items": "/example-schema:a",
++  "sysrepo:discard-items": "/example-schema:b",
++  "example-schema:leafInt32": "",
++  "@example-schema:leafInt32": {
++    "ietf-netconf:operation": "delete"
++  },
++  "sysrepo:discard-items": "/example-schema:c"
++}
++)");
++
++            REQUIRE(dummy.firstOpaqueSibling() == discard1);
++            REQUIRE(dummy.firstOpaqueSibling() != discard2);
++            REQUIRE(leafInt16.firstOpaqueSibling() == discard1);
++            REQUIRE(opaqueLeaf.firstOpaqueSibling() == discard1);
++            REQUIRE(discard1->firstOpaqueSibling() == discard1);
++            REQUIRE(discard2->firstOpaqueSibling() == discard1);
++            REQUIRE(discard3->firstOpaqueSibling() == discard1);
++            REQUIRE(discard1->asOpaque().name().matches("sysrepo", "discard-items"));
++            REQUIRE(!discard1->asOpaque().name().matches("http://www.sysrepo.org/yang/sysrepo", "discard-items"));
++            REQUIRE(discard2->asOpaque().name().matches("sysrepo", "discard-items"));
++            REQUIRE(!discard2->asOpaque().name().matches("http://www.sysrepo.org/yang/sysrepo", "discard-items"));
++            REQUIRE(discard3->asOpaque().name().matches("sysrepo", "discard-items"));
++            REQUIRE(discard3->asOpaque().name().matches("http://www.sysrepo.org/yang/sysrepo", "discard-items"));
++            REQUIRE(!opaqueLeaf.asOpaque().name().matches("sysrepo", "discard-items"));
++
++            REQUIRE(!!dummy.firstOpaqueSibling()->nextSibling());
++            REQUIRE(dummy.firstOpaqueSibling()->nextSibling() == discard2);
++            REQUIRE(!!dummy.firstOpaqueSibling()->nextSibling()->nextSibling());
++            REQUIRE(dummy.firstOpaqueSibling()->nextSibling()->nextSibling() == opaqueLeaf);
++            REQUIRE(!!dummy.firstOpaqueSibling()->nextSibling()->nextSibling()->nextSibling());
++            REQUIRE(dummy.firstOpaqueSibling()->nextSibling()->nextSibling()->nextSibling() == discard3);
++            REQUIRE(!dummy.firstOpaqueSibling()->nextSibling()->nextSibling()->nextSibling()->nextSibling());
+         }
+ 
+         DOCTEST_SUBCASE("RESTCONF RPC output")
+diff --git a/tests/yang/sysrepo@2024-10-25.yang b/tests/yang/sysrepo@2024-10-25.yang
+new file mode 100644
+index 0000000..f5bc32c
+--- /dev/null
++++ b/tests/yang/sysrepo@2024-10-25.yang
+@@ -0,0 +1,257 @@
++module sysrepo {
++    namespace "http://www.sysrepo.org/yang/sysrepo";
++    prefix sr;
++
++    yang-version 1.1;
++
++    import ietf-yang-types {
++        prefix yang;
++    }
++
++    import ietf-datastores {
++        prefix ds;
++    }
++
++    import ietf-yang-metadata {
++        prefix md;
++        revision-date 2016-08-05;
++    }
++
++    organization
++        "CESNET";
++
++    contact
++        "Author: Michal Vasko
++                 <mvasko@cesnet.cz>";
++
++    description
++        "Sysrepo YANG datastore internal attributes and information.";
++
++    revision "2024-10-25" {
++        description
++            "Removed redundant metadata used for push operational data.";
++    }
++
++    revision "2019-07-10" {
++        description
++            "Initial revision.";
++    }
++
++    typedef module-ref {
++        description
++            "Reference to a module.";
++        type leafref {
++            path "/sysrepo-modules/module/name";
++        }
++    }
++
++    md:annotation operation {
++        type enumeration {
++            enum none {
++                description
++                    "Node with this operation must exist but does not affect the datastore in any way.";
++                reference
++                    "RFC 6241 section 7.2.: default-operation";
++            }
++            enum ether {
++                description
++                    "Node with this operation does not have to exist and does not affect the datastore in any way.";
++            }
++            enum purge {
++                description
++                    "Node with this operation represents an arbitrary generic node instance and all
++                     the instances will be deleted.";
++            }
++        }
++        description
++            "Additional proprietary <edit-config> operations used internally.";
++        reference
++            "RFC 6241 section 7.2.";
++    }
++
++    identity notification {
++        base ds:datastore;
++        description
++            "Special datastore for storing notifications for replay.";
++    }
++
++    grouping module-info-grp {
++        leaf name {
++            type string;
++            description
++                "Module name.";
++        }
++
++        leaf revision {
++            type string;
++            description
++                "Module revision.";
++        }
++
++        leaf-list enabled-feature {
++            type string;
++            description
++                "List of all the enabled features.";
++        }
++
++        list plugin {
++            key "datastore";
++            description
++                "Module datastore plugin handling specific datastore data.";
++
++            leaf datastore {
++                type identityref {
++                    base ds:datastore;
++                }
++                description
++                    "Datastore of this plugin.";
++            }
++
++            leaf name {
++                type string;
++                mandatory true;
++                description
++                    "Specific plugin name as present in the plugin structures.";
++            }
++        }
++    }
++
++    grouping deps-grp {
++        list lref {
++            description
++                "Dependency of a leafref node.";
++
++            leaf target-path {
++                type yang:xpath1.0;
++                mandatory true;
++                description
++                    "Path identifying the leafref target node.";
++            }
++
++            leaf target-module {
++                type module-ref;
++                mandatory true;
++                description
++                    "Foreign target module of the leafref.";
++            }
++        }
++
++        list inst-id {
++            description
++                "Dependency of an instance-identifier node.";
++
++            leaf source-path {
++                type yang:xpath1.0;
++                mandatory true;
++                description
++                    "Path identifying the instance-identifier node.";
++            }
++
++            leaf default-target-path {
++                type yang:xpath1.0;
++                description
++                    "Default instance-identifier value.";
++            }
++        }
++
++        list xpath {
++            description
++                "Dependency of an XPath expression - must or when statement.";
++
++            leaf expression {
++                type yang:xpath1.0;
++                mandatory true;
++                description
++                    "XPath expression of the dependency - must or when statement argument.";
++            }
++
++            leaf-list target-module {
++                type module-ref;
++                description
++                    "Foreign modules with the data needed for evaluation of the XPath.";
++            }
++        }
++    }
++
++    container sysrepo-modules {
++        config false;
++        description
++            "All installed Sysrepo modules.";
++
++        leaf content-id {
++            type uint32;
++            mandatory true;
++            description
++                "Sysrepo module-set content-id to be used for its generated yang-library data.";
++        }
++
++        list module {
++            key "name";
++            description
++                "Sysrepo module.";
++
++            uses module-info-grp;
++
++            leaf replay-support {
++                type yang:date-and-time;
++                description
++                    "Present only if the module supports replay. Means the earliest stored notification if any present.
++                     Otherwise the time the replay support was switched on.";
++            }
++
++            container deps {
++                description
++                    "Module data dependencies on other modules.";
++                uses deps-grp;
++            }
++
++            leaf-list inverse-deps {
++                type module-ref;
++                description
++                    "List of modules that depend on this module.";
++            }
++
++            list rpc {
++                key "path";
++                description
++                    "Module RPC/actions.";
++
++                leaf path {
++                    type yang:xpath1.0;
++                    description
++                        "Path identifying the operation.";
++                }
++
++                container in {
++                    description
++                        "Operation input dependencies.";
++                    uses deps-grp;
++                }
++
++                container out {
++                    description
++                        "Operation output dependencies.";
++                    uses deps-grp;
++                }
++            }
++
++            list notification {
++                key "path";
++                description
++                    "Module notifications.";
++
++                leaf path {
++                    type yang:xpath1.0;
++                    description
++                        "Path identifying the notification.";
++                }
++
++                container deps {
++                    description
++                        "Notification dependencies.";
++                    uses deps-grp;
++                }
++            }
++        }
++    }
++}
+-- 
+2.43.0
+

package/libyang-cpp/0017-build-link-to-libpcre2-explicitly.patch

@@ -0,0 +1,56 @@
+From dab8c9aac96063ccb8541d5d1795ee89b75faeee Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Wed, 2 Apr 2025 11:50:24 -0700
+Subject: [PATCH 17/18] build: link to libpcre2 explicitly
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+This is apparently a problem on Mac OS X builds where the transitive
+dependency via libyang doesn't take effect:
+
+ Undefined symbols for architecture arm64:
+   "_pcre2_code_free_8", referenced from:
+       libyang::Regex::~Regex() in Regex.cpp.o
+       libyang::Regex::~Regex() in Regex.cpp.o
+ ld: symbol(s) not found for architecture arm64
+
+Let's fix this by linking with libpcre2-8 directly.
+
+We're using a different approach than libyang; they have their own CMake
+wrapper. I find it easier to work with pkg-config modules, so let's try
+it that way.
+
+Change-Id: I1a64407d852161595b7dca654433190002cc3600
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index c5fec45..4e009aa 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -34,6 +34,9 @@ pkg_check_modules(LIBYANG REQUIRED libyang>=3.10.1 IMPORTED_TARGET)
+ # FIXME from gcc 14.1 on we should be able to use the calendar/time from libstdc++ and thus remove the date dependency
+ find_package(date)
+ 
++# libyang::Regex::~Regex() bypasses libyang and calls out to libpcre directly
++pkg_check_modules(LIBPCRE2 REQUIRED libpcre2-8 IMPORTED_TARGET)
++
+ include_directories(${CMAKE_CURRENT_SOURCE_DIR}/include)
+ 
+ include(CheckIncludeFileCXX)
+@@ -64,7 +67,7 @@ add_library(yang-cpp
+     src/utils/newPath.cpp
+     )
+ 
+-target_link_libraries(yang-cpp PRIVATE PkgConfig::LIBYANG)
++target_link_libraries(yang-cpp PRIVATE PkgConfig::LIBYANG PkgConfig::LIBPCRE2)
+ # We do not offer any long-term API/ABI guarantees. To make stuff easier for downstream consumers,
+ # we will be bumping both API and ABI versions very deliberately.
+ # There will be no attempts at semver tracking, for example.
+-- 
+2.43.0
+

package/libyang-cpp/0018-CI-renamed-project-upstream.patch

@@ -0,0 +1,66 @@
+From 7519fcd35216072a6b1eebe2a79e19789be345a9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Wed, 9 Apr 2025 15:35:37 +0200
+Subject: [PATCH 18/18] CI: renamed project upstream
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I5447f243297fbfde7c364eb3919b00db239bd069
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ .zuul.yaml  | 4 ++--
+ README.md   | 2 +-
+ ci/build.sh | 2 +-
+ 3 files changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/.zuul.yaml b/.zuul.yaml
+index b41c490..7b92766 100644
+--- a/.zuul.yaml
++++ b/.zuul.yaml
+@@ -5,13 +5,13 @@
+             required-projects:
+               - name: github/CESNET/libyang
+                 override-checkout: devel
+-              - name: github/onqtam/doctest
++              - name: github/doctest/doctest
+                 override-checkout: v2.3.6
+         - f38-clang-asan-ubsan:
+             required-projects: &projects
+               - name: github/CESNET/libyang
+                 override-checkout: devel
+-              - name: github/onqtam/doctest
++              - name: github/doctest/doctest
+                 override-checkout: v2.4.11
+         - f38-clang-tsan:
+             required-projects: *projects
+diff --git a/README.md b/README.md
+index d76975b..8291e00 100644
+--- a/README.md
++++ b/README.md
+@@ -11,7 +11,7 @@ Object lifetimes are managed automatically via RAII.
+ - [libyang v3](https://github.com/CESNET/libyang) - the `devel` branch (even for the `master` branch of *libyang-cpp*)
+ - C++20 compiler (e.g., GCC 10.x+, clang 10+)
+ - CMake 3.19+
+-- optionally for built-in tests, [Doctest](https://github.com/onqtam/doctest/) as a C++ unit test framework
++- optionally for built-in tests, [Doctest](https://github.com/doctest/doctest/) as a C++ unit test framework
+ - optionally for the docs, Doxygen
+ 
+ ## Building
+diff --git a/ci/build.sh b/ci/build.sh
+index d06b646..0867f07 100755
+--- a/ci/build.sh
++++ b/ci/build.sh
+@@ -73,7 +73,7 @@ build_n_test() {
+ }
+ 
+ build_n_test github/CESNET/libyang -DENABLE_BUILD_TESTS=ON -DENABLE_VALGRIND_TESTS=OFF
+-build_n_test github/onqtam/doctest -DDOCTEST_WITH_TESTS=OFF
++build_n_test github/doctest/doctest -DDOCTEST_WITH_TESTS=OFF
+ build_n_test ${ZUUL_PROJECT_NAME} -DBUILD_TESTING=ON
+ 
+ pushd ${BUILD_DIR}/${ZUUL_PROJECT_NAME}
+-- 
+2.43.0
+

package/lowdown/fix-build.patch

@@ -0,0 +1,27 @@
+diff -urN lowdown-VERSION_1_0_2.orig/configure lowdown-VERSION_1_0_2/configure
+--- lowdown-VERSION_1_0_2.orig/configure	2025-03-21 12:58:06.151106271 +0000
++++ lowdown-VERSION_1_0_2/configure	2025-03-21 13:20:20.649825864 +0000
+@@ -61,12 +61,7 @@
+ 
+ MAKE_FLAGS=""
+ 
+-if [ -n "${MAKELEVEL}" ]; then
+-	if [ "${MAKELEVEL}" -gt 0 ] ; then
+-		MAKE_FLAGS="--no-print-directory"
+-		echo "all:" | make ${MAKE_FLAGS} -sf - 2>/dev/null || MAKE_FLAGS=""
+-	fi
+-fi
++MAKE_FLAGS="--no-print-directory"
+ 
+ if [ -n "$MAKE_FLAGS" ]; then 
+ 	echo "GNU submake detected: using --no-print-directory" 1>&2
+@@ -79,9 +74,6 @@
+ # in.
+ #----------------------------------------------------------------------
+ 
+-AR=`printf "all:\\n\\t@echo \\\$(AR)\\n" | make ${MAKE_FLAGS} -sf -`
+-CC=`printf "all:\\n\\t@echo \\\$(CC)\\n" | make ${MAKE_FLAGS} -sf -`
+-CFLAGS=`printf "all:\\n\\t@echo \\\$(CFLAGS)\\n" | make ${MAKE_FLAGS} -sf -`
+ CFLAGS="${CFLAGS} -g -W -Wall -Wextra -Wmissing-prototypes -Wstrict-prototypes"
+ CFLAGS="${CFLAGS} -Wwrite-strings -Wno-unused-parameter"
+ LDLIBS=

package/nghttp2-asio/nghttp2-asio.mk

@@ -9,7 +9,7 @@ NGHTTP2_ASIO_SITE = https://github.com/kernelkit/nghttp2-asio.git
 NGHTTP2_ASIO_SITE_METHOD = git
 NGHTTP2_ASIO_LICENSE = MIT
 NGHTTP2_ASIO_LICENSE_FILES = COPYING
-NGHTTP2_ASIO_DEPENDENCIES = boost nghttp2
+NGHTTP2_ASIO_DEPENDENCIES = boost nghttp2 openssl
 NGHTTP2_ASIO_INSTALL_STAGING = YES
 NGHTTP2_ASIO_AUTOGEN = YES
 NGHTTP2_ASIO_AUTORECONF = YES

package/python-libyang/python-libyang.mk

@@ -10,8 +10,8 @@ PYTHON_LIBYANG_SITE = https://files.pythonhosted.org/packages/91/2e/ff13ee16c874
 PYTHON_LIBYANG_SETUP_TYPE = setuptools
 PYTHON_LIBYANG_LICENSE = MIT
 PYTHON_LIBYANG_LICENSE_FILES = LICENSE
-PYTHON_LIBYANG_DEPENDENCIES = python-cython python-cffi
-HOST_PYTHON_LIBYANG_DEPENDENCIES = host-python-cython host-python-cffi
+PYTHON_LIBYANG_DEPENDENCIES = python-cython python-cffi libyang
+HOST_PYTHON_LIBYANG_DEPENDENCIES = host-python-cython host-python-cffi host-libyang
 
 $(eval $(python-package))
 $(eval $(host-python-package))

package/rousette/0001-restconf-report-the-list-key-values-when-they-differ.patch

@@ -1,12 +1,12 @@
 From 9622a68eba4aeaa60619b4c33d050ce91b27653d Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Tue, 8 Oct 2024 12:22:49 +0200
-Subject: [PATCH 01/20] restconf: report the list key values when they differ
+Subject: [PATCH 01/44] restconf: report the list key values when they differ
  between URI and data
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 For creating (leaf-)list instances with PUT and PATCH methods one has
 to specify the list key values in the URI and in the data as well.

package/rousette/0002-uri-rename-url-encoding-to-percent-encoding.patch

@@ -1,11 +1,11 @@
 From 070cffb48fda789910581930265d4624a7213e1b Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Wed, 16 Oct 2024 11:02:45 +0200
-Subject: [PATCH 02/20] uri: rename url-encoding to percent-encoding
+Subject: [PATCH 02/44] uri: rename url-encoding to percent-encoding
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 RFC 3986 [1] calls it the percent-encoding, let's be consistent.
 

package/rousette/0003-uri-correct-x3-rule-class-names.patch

@@ -1,11 +1,11 @@
 From 8a233202647f24538f2bbb8fff1e38d52e3599a4 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Wed, 16 Oct 2024 11:05:09 +0200
-Subject: [PATCH 03/20] uri: correct x3 rule class names
+Subject: [PATCH 03/44] uri: correct x3 rule class names
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Fixes: e06d5bf ("server: parser for data resources in URI paths")
 Change-Id: Ic953e568d841032113ede1c0e896574361c0ebe2

package/rousette/0004-restconf-parser-should-work-on-raw-percent-encoded-p.patch

@@ -1,12 +1,12 @@
 From 96cbf730010ee9539d05d0d72697dc960b3a938c Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 7 Oct 2024 20:46:24 +0200
-Subject: [PATCH 04/20] restconf: parser should work on raw percent-encoded
+Subject: [PATCH 04/44] restconf: parser should work on raw percent-encoded
  paths
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 The difference between nghttp2's uri_ref::path and raw_path is that the
 raw_path keeps the percent encoding, while the path converts the percent

package/rousette/0005-restconf-list-key-values-checking-must-respect-libya.patch

@@ -1,12 +1,12 @@
 From 8b13c1e4ccaa61a241674c27063439e257fa88de Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Wed, 2 Oct 2024 20:21:28 +0200
-Subject: [PATCH 05/20] restconf: list key values checking must respect
+Subject: [PATCH 05/44] restconf: list key values checking must respect
  libyang's canonicalization
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 While dealing with the issue that was fixed in the previous commit we
 realized that the issue is deeper. Not only that our parser rejected

package/rousette/0006-tests-test-querying-lists-with-union-keys.patch

@@ -1,11 +1,11 @@
 From fda47b6a6cfdaecc24e96c4d6138c6de3ef116e0 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 7 Oct 2024 21:21:22 +0200
-Subject: [PATCH 06/20] tests: test querying lists with union keys
+Subject: [PATCH 06/44] tests: test querying lists with union keys
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Test that we correctly work with keys that are unions of something
 that can have a module namespace and that must not have it.

package/rousette/0007-error-handling-in-sysrepo-has-changed.patch

@@ -1,11 +1,11 @@
 From 27ef5bc87fdeb70a77609da6ec18ee5c28656bb6 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
 Date: Tue, 29 Oct 2024 18:54:55 +0100
-Subject: [PATCH 07/20] error handling in sysrepo has changed
+Subject: [PATCH 07/44] error handling in sysrepo has changed
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Depends-on: https://gerrit.cesnet.cz/c/CzechLight/dependencies/+/7969
 Change-Id: Id028806ed49114cba4c55e2874bcf3fc98308bdc

package/rousette/0008-restconf-support-fields-query-parameter.patch

@@ -1,11 +1,11 @@
 From 6819561d97e38569c319e36ca2e99768036b4032 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Wed, 21 Aug 2024 19:18:08 +0200
-Subject: [PATCH 08/20] restconf: support fields query parameter
+Subject: [PATCH 08/44] restconf: support fields query parameter
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 This patch adds support for fields query parameter [1].
 

package/rousette/0009-cmake-adhere-to-CMP0167.patch

@@ -1,11 +1,11 @@
 From 48d9b6ba3f3f892b9060b76b505d2f9a3aeb9e02 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 25 Nov 2024 09:15:55 +0100
-Subject: [PATCH 09/20] cmake: adhere to CMP0167
+Subject: [PATCH 09/44] cmake: adhere to CMP0167
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 After locally updating to cmake 3.30 I have seen a warning that our way
 of finding boost library is deprecated [1].

package/rousette/0010-Fix-compatibility-with-pam_wrapper-1.1.6.patch

@@ -1,11 +1,11 @@
 From 64997543d48236cd2aae417568bc54d32c54df21 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
 Date: Mon, 2 Dec 2024 14:43:36 +0100
-Subject: [PATCH 10/20] Fix compatibility with pam_wrapper 1.1.6+
+Subject: [PATCH 10/44] Fix compatibility with pam_wrapper 1.1.6+
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 An year ago I reported a bug that the pam_wrapper project says that they
 use a variable called `PAM_WRAPPER_DISABLE_DEEPBIND`, but in fact they

package/rousette/0011-tests-add-missing-pragma-once.patch

@@ -1,11 +1,11 @@
 From 849aa35274d5e07726cb849fe724962754b3fa29 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 20:20:48 +0100
-Subject: [PATCH 11/20] tests: add missing pragma once
+Subject: [PATCH 11/44] tests: add missing pragma once
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Change-Id: I269c20e5a914aa8c7bc9431147dd9785ea1aedda
 Signed-off-by: Mattias Walström <lazzer@gmail.com>

package/rousette/0012-tests-extend-clientRequest-wrappers-interface-and-us.patch

@@ -1,12 +1,12 @@
 From 60eac2b2d60f8f1918a0914272975dd53f527c01 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 19:36:10 +0100
-Subject: [PATCH 12/20] tests: extend clientRequest wrappers interface and use
+Subject: [PATCH 12/44] tests: extend clientRequest wrappers interface and use
  it
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 This is a preparation for refactoring in the next few commits.
 I will generalize the clientRequest interface to accept server

package/rousette/0013-tests-move-stuff-from-the-header-file-into-cpp-file.patch

@@ -1,11 +1,11 @@
 From 0beaee041fd4fcfbebcbb2912eb6b26ec71f50c7 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 20:01:54 +0100
-Subject: [PATCH 13/20] tests: move stuff from the header file into cpp file
+Subject: [PATCH 13/44] tests: move stuff from the header file into cpp file
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Allright, I have had enough. I am no longer waiting for a minute for a
 recompilation of one test.

package/rousette/0014-tests-rename-datastoreUtils-to-event_watchers.patch

@@ -1,11 +1,11 @@
 From 53aa2e23ee8acc1881487f3969c2c58fb29437be Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 20:08:53 +0100
-Subject: [PATCH 14/20] tests: rename datastoreUtils to event_watchers
+Subject: [PATCH 14/44] tests: rename datastoreUtils to event_watchers
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 The next commit will move RESTCONF notification watchers there, I think
 the new name is more appropriate.

package/rousette/0015-tests-rename-NotificationWatcher.patch

@@ -1,11 +1,11 @@
 From f86df829979a26d5192a86c3b43c1393dcba7140 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Tue, 3 Dec 2024 11:45:41 +0100
-Subject: [PATCH 15/20] tests: rename NotificationWatcher
+Subject: [PATCH 15/44] tests: rename NotificationWatcher
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 This watches notifications going through RESTCONF, so I think
 RestconfNotificatonWatcher is better name for this.

package/rousette/0016-tests-make-NotificationWatcher-reusable.patch

@@ -1,11 +1,11 @@
 From 30d704588fa7eb9d32f66296ec5f6784f082869e Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 20:11:32 +0100
-Subject: [PATCH 16/20] tests: make NotificationWatcher reusable
+Subject: [PATCH 16/44] tests: make NotificationWatcher reusable
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 We will need some parts of this in yang push tests
 

package/rousette/0017-tests-helper-function-to-construct-server-URI.patch

@@ -1,11 +1,11 @@
 From 36943051d8563bee0c9cf89eec28acf5d3617272 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Tue, 3 Dec 2024 12:02:24 +0100
-Subject: [PATCH 17/20] tests: helper function to construct server URI
+Subject: [PATCH 17/44] tests: helper function to construct server URI
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 Change-Id: Ic7c03b32a29b07464291f99027530010a7902f77
 Signed-off-by: Mattias Walström <lazzer@gmail.com>

package/rousette/0018-tests-make-SSEClient-reusable.patch

@@ -1,11 +1,11 @@
 From 7d15f59d20079ba94224e0bc308682aa5a004483 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Mon, 2 Dec 2024 20:15:05 +0100
-Subject: [PATCH 18/20] tests: make SSEClient reusable
+Subject: [PATCH 18/44] tests: make SSEClient reusable
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 We will need it in yang push tests
 

package/rousette/0019-tests-fix-deadlock-in-tests.patch

@@ -1,11 +1,11 @@
 From 3e3e492f4801df56226a5aff5d82bfa86c9d3812 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Tue, 3 Dec 2024 13:59:52 +0100
-Subject: [PATCH 19/20] tests: fix deadlock in tests
+Subject: [PATCH 19/44] tests: fix deadlock in tests
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 In the case the client never requests (because of misconfiguration or
 something else) the test would still be waiting for somebody to

package/rousette/0020-restconf-make-as_restconf_notification-reusable.patch

@@ -1,11 +1,11 @@
 From ed0ff23f7ad341d663484f0b2a617cd3bc4923c8 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
 Date: Tue, 3 Dec 2024 19:27:49 +0100
-Subject: [PATCH 20/20] restconf: make as_restconf_notification reusable
+Subject: [PATCH 20/44] restconf: make as_restconf_notification reusable
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
-Organization: Addiva Elektronik
+Organization: Wires
 
 The YANG-PUSH notifications are supposed to be wrapped in this too, so
 this needs to be accessible from multiple places.

package/rousette/0021-Update-dependencies.patch

@@ -1,17 +1,25 @@
 From f7307481fc4ca167592acf925136e5f8a51e2150 Mon Sep 17 00:00:00 2001
-From: Jan Kundrát <jan.kundrat@cesnet.cz>
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
 Date: Wed, 18 Dec 2024 17:26:15 +0100
-Subject: [PATCH] Update dependencies
+Subject: [PATCH 21/44] Update dependencies
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
 
 Depends-on: https://gerrit.cesnet.cz/c/CzechLight/dependencies/+/8134
 Change-Id: Ib170aa61600ffb9089460247f762ff5a947dd6c6
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
 ---
+ CMakeLists.txt             | 2 +-
+ tests/restconf-writing.cpp | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
 
 diff --git a/CMakeLists.txt b/CMakeLists.txt
 index 22bce32..5ae8062 100644
 --- a/CMakeLists.txt
 +++ b/CMakeLists.txt
-@@ -74,7 +74,7 @@
+@@ -74,7 +74,7 @@ find_package(PkgConfig)
  pkg_check_modules(nghttp2 REQUIRED IMPORTED_TARGET libnghttp2_asio>=0.0.90 libnghttp2)
  find_package(Boost REQUIRED CONFIG COMPONENTS system thread)
  
@@ -24,7 +32,7 @@ diff --git a/tests/restconf-writing.cpp b/tests/restconf-writing.cpp
 index 0932984..d37ab03 100644
 --- a/tests/restconf-writing.cpp
 +++ b/tests/restconf-writing.cpp
-@@ -772,7 +772,7 @@
+@@ -772,7 +772,7 @@ TEST_CASE("writing data")
        {
          "error-type": "protocol",
          "error-tag": "invalid-value",
@@ -33,7 +41,7 @@ index 0932984..d37ab03 100644
        }
      ]
    }
-@@ -855,7 +855,7 @@
+@@ -855,7 +855,7 @@ TEST_CASE("writing data")
        {
          "error-type": "protocol",
          "error-tag": "invalid-value",
@@ -42,7 +50,7 @@ index 0932984..d37ab03 100644
        }
      ]
    }
-@@ -1560,7 +1560,7 @@
+@@ -1560,7 +1560,7 @@ TEST_CASE("writing data")
        {
          "error-type": "protocol",
          "error-tag": "invalid-value",
@@ -51,7 +59,7 @@ index 0932984..d37ab03 100644
        }
      ]
    }
-@@ -1626,7 +1626,7 @@
+@@ -1626,7 +1626,7 @@ TEST_CASE("writing data")
        {
          "error-type": "protocol",
          "error-tag": "invalid-value",
@@ -60,3 +68,6 @@ index 0932984..d37ab03 100644
        }
      ]
    }
+-- 
+2.43.0
+

package/rousette/0022-restconf-add-RAII-datastore-switch.patch

@@ -0,0 +1,104 @@
+From c967e688c53000519ceb6030e8282296e4846d3c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 13 Jan 2025 18:29:29 +0100
+Subject: [PATCH 22/44] restconf: add RAII datastore switch
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Copied from sysrepo-ietf-alarms[1].
+
+[1] https://github.com/CESNET/sysrepo-ietf-alarms/blob/4870dbee30a5ec56135d4f4cb5818f191c089c34/src/utils/sysrepo.cpp
+
+Change-Id: I51738d06187e141ebd662e7b9421ca995380cafc
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt                 |  1 +
+ src/restconf/utils/sysrepo.cpp | 25 +++++++++++++++++++++++++
+ src/restconf/utils/sysrepo.h   | 29 +++++++++++++++++++++++++++++
+ 3 files changed, 55 insertions(+)
+ create mode 100644 src/restconf/utils/sysrepo.cpp
+ create mode 100644 src/restconf/utils/sysrepo.h
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 5ae8062..7f3a9c0 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -114,6 +114,7 @@ add_library(rousette-restconf STATIC
+     src/restconf/YangSchemaLocations.cpp
+     src/restconf/uri.cpp
+     src/restconf/utils/dataformat.cpp
++    src/restconf/utils/sysrepo.cpp
+     src/restconf/utils/yang.cpp
+ )
+ target_link_libraries(rousette-restconf PUBLIC rousette-http rousette-sysrepo rousette-auth Boost::system Threads::Threads PRIVATE date::date-tz)
+diff --git a/src/restconf/utils/sysrepo.cpp b/src/restconf/utils/sysrepo.cpp
+new file mode 100644
+index 0000000..622ab27
+--- /dev/null
++++ b/src/restconf/utils/sysrepo.cpp
+@@ -0,0 +1,25 @@
++/*
++ * Copyright (C) 2020, 2022 CESNET, https://photonics.cesnet.cz/
++ *
++ * Written by Jan Kundrát <jan.kundrat@cesnet.cz>
++ * Written by Tomáš Pecka <tomas.pecka@cesnet.cz>
++ */
++
++#include <sysrepo-cpp/Connection.hpp>
++#include "sysrepo.h"
++
++namespace rousette::restconf {
++
++ScopedDatastoreSwitch::ScopedDatastoreSwitch(sysrepo::Session session, sysrepo::Datastore ds)
++    : m_session(std::move(session))
++    , m_oldDatastore(m_session.activeDatastore())
++{
++    m_session.switchDatastore(ds);
++}
++
++ScopedDatastoreSwitch::~ScopedDatastoreSwitch()
++{
++    m_session.switchDatastore(m_oldDatastore);
++}
++
++}
+diff --git a/src/restconf/utils/sysrepo.h b/src/restconf/utils/sysrepo.h
+new file mode 100644
+index 0000000..da6c359
+--- /dev/null
++++ b/src/restconf/utils/sysrepo.h
+@@ -0,0 +1,29 @@
++/*
++ * Copyright (C) 2020, 2022 CESNET, https://photonics.cesnet.cz/
++ *
++ * Written by Jan Kundrát <jan.kundrat@cesnet.cz>
++ * Written by Tomáš Pecka <tomas.pecka@cesnet.cz>
++ */
++
++#pragma once
++
++#include <libyang-cpp/Context.hpp>
++#include <sysrepo-cpp/Session.hpp>
++
++namespace rousette::restconf {
++
++/** @brief Ensures that session switches to provided datastore and when the object gets destroyed the session switches back to the original datastore. */
++class ScopedDatastoreSwitch {
++    sysrepo::Session m_session;
++    sysrepo::Datastore m_oldDatastore;
++
++public:
++    ScopedDatastoreSwitch(sysrepo::Session session, sysrepo::Datastore ds);
++    ~ScopedDatastoreSwitch();
++    ScopedDatastoreSwitch(const ScopedDatastoreSwitch&) = delete;
++    ScopedDatastoreSwitch(ScopedDatastoreSwitch&&) = delete;
++    ScopedDatastoreSwitch& operator=(const ScopedDatastoreSwitch&) = delete;
++    ScopedDatastoreSwitch& operator=(ScopedDatastoreSwitch&&) = delete;
++};
++
++}
+-- 
+2.43.0
+

package/rousette/0023-restconf-add-missing-pragma-once.patch

@@ -0,0 +1,30 @@
+From 05274bd27b886e67accc86be7153ed76465b156e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Wed, 15 Jan 2025 17:56:26 +0100
+Subject: [PATCH 23/44] restconf: add missing pragma once
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I6d337c99351e24226fb322a40ba2e96655104860
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/NotificationStream.h | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/restconf/NotificationStream.h b/src/restconf/NotificationStream.h
+index 6840f11..3029a0d 100644
+--- a/src/restconf/NotificationStream.h
++++ b/src/restconf/NotificationStream.h
+@@ -5,6 +5,7 @@
+  *
+  */
+ 
++#pragma once
+ #include <optional>
+ #include <sysrepo-cpp/Session.hpp>
+ #include <sysrepo-cpp/Subscription.hpp>
+-- 
+2.43.0
+

package/rousette/0024-restconf-make-fetching-replay-info-reusable.patch

@@ -0,0 +1,108 @@
+From bd7def1768e360cc491d56805f7c16784c2f4fbe Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Wed, 15 Jan 2025 18:27:25 +0100
+Subject: [PATCH 24/44] restconf: make fetching replay info reusable
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+We are querying sysrepo for replay support in our modules for NETCONF
+stream. This part of code will be reused for dynamic subscriptions to
+NETCONF stream as well, so let's make it reusable.
+
+Change-Id: Id5bc656619acb8e56dfafde23b03107139d34e94
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/NotificationStream.cpp | 57 +++++++++++++++++------------
+ 1 file changed, 34 insertions(+), 23 deletions(-)
+
+diff --git a/src/restconf/NotificationStream.cpp b/src/restconf/NotificationStream.cpp
+index eeddc04..e00c39d 100644
+--- a/src/restconf/NotificationStream.cpp
++++ b/src/restconf/NotificationStream.cpp
+@@ -50,6 +50,36 @@ bool canBeSubscribed(const libyang::Module& mod)
+ {
+     return mod.implemented() && mod.name() != "sysrepo";
+ }
++
++struct SysrepoReplayInfo {
++    bool enabled;
++    std::optional<sysrepo::NotificationTimeStamp> earliestNotification;
++};
++
++SysrepoReplayInfo sysrepoReplayInfo(sysrepo::Session& session)
++{
++    decltype(sysrepo::ModuleReplaySupport::earliestNotification) globalEarliestNotification;
++    bool replayEnabled = false;
++
++    for (const auto& mod : session.getContext().modules()) {
++        if (!canBeSubscribed(mod)) {
++            continue;
++        }
++
++        auto replay = session.getConnection().getModuleReplaySupport(mod.name());
++        replayEnabled |= replay.enabled;
++
++        if (replay.earliestNotification) {
++            if (!globalEarliestNotification) {
++                globalEarliestNotification = replay.earliestNotification;
++            } else {
++                globalEarliestNotification = std::min(*replay.earliestNotification, *globalEarliestNotification);
++            }
++        }
++    }
++
++    return {replayEnabled, globalEarliestNotification};
++}
+ }
+ 
+ namespace rousette::restconf {
+@@ -114,28 +144,9 @@ void NotificationStream::activate()
+ /** @brief Creates and fills ietf-restconf-monitoring:restconf-state/stream. To be called in oper callback. */
+ void notificationStreamList(sysrepo::Session& session, std::optional<libyang::DataNode>& parent, const std::string& streamsPrefix)
+ {
++    const auto replayInfo = sysrepoReplayInfo(session);
+     static const auto prefix = "/ietf-restconf-monitoring:restconf-state/streams/stream[name='NETCONF']"s;
+ 
+-    decltype(sysrepo::ModuleReplaySupport::earliestNotification) globalEarliestNotification;
+-    bool replayEnabled = false;
+-
+-    for (const auto& mod : session.getContext().modules()) {
+-        if (!canBeSubscribed(mod)) {
+-            continue;
+-        }
+-
+-        auto replay = session.getConnection().getModuleReplaySupport(mod.name());
+-        replayEnabled |= replay.enabled;
+-
+-        if (replay.earliestNotification) {
+-            if (!globalEarliestNotification) {
+-                globalEarliestNotification = replay.earliestNotification;
+-            } else {
+-                globalEarliestNotification = std::min(*replay.earliestNotification, *globalEarliestNotification);
+-            }
+-        }
+-    }
+-
+     if (!parent) {
+         parent = session.getContext().newPath(prefix + "/description", "Default NETCONF notification stream");
+     } else {
+@@ -144,11 +155,11 @@ void notificationStreamList(sysrepo::Session& session, std::optional<libyang::Da
+     parent->newPath(prefix + "/access[encoding='xml']/location", streamsPrefix + "NETCONF/XML");
+     parent->newPath(prefix + "/access[encoding='json']/location", streamsPrefix + "NETCONF/JSON");
+ 
+-    if (replayEnabled) {
++    if (replayInfo.enabled) {
+         parent->newPath(prefix + "/replay-support", "true");
+ 
+-        if (globalEarliestNotification) {
+-            parent->newPath(prefix + "/replay-log-creation-time", libyang::yangTimeFormat(*globalEarliestNotification, libyang::TimezoneInterpretation::Local));
++        if (replayInfo.earliestNotification) {
++            parent->newPath(prefix + "/replay-log-creation-time", libyang::yangTimeFormat(*replayInfo.earliestNotification, libyang::TimezoneInterpretation::Local));
+         }
+     }
+ }
+-- 
+2.43.0
+

package/rousette/0025-sysrepo-upstream-API-change-NULL-output-on-RPCs.patch

@@ -0,0 +1,53 @@
+From 08458725211e707dec7bfebf7c5188e766136677 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Fri, 7 Feb 2025 17:34:04 +0100
+Subject: [PATCH 25/44] sysrepo upstream API change: NULL output on RPCs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Depends-on: https://gerrit.cesnet.cz/c/CzechLight/dependencies/+/8289
+Change-Id: I8db21637246492b0f79d1adf7df1704df5173e39
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt          | 2 +-
+ src/restconf/Server.cpp | 4 ++--
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 7f3a9c0..cdd0eb4 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -74,7 +74,7 @@ find_package(PkgConfig)
+ pkg_check_modules(nghttp2 REQUIRED IMPORTED_TARGET libnghttp2_asio>=0.0.90 libnghttp2)
+ find_package(Boost REQUIRED CONFIG COMPONENTS system thread)
+ 
+-pkg_check_modules(SYSREPO-CPP REQUIRED IMPORTED_TARGET sysrepo-cpp>=4)
++pkg_check_modules(SYSREPO-CPP REQUIRED IMPORTED_TARGET sysrepo-cpp>=5)
+ pkg_check_modules(LIBYANG-CPP REQUIRED IMPORTED_TARGET libyang-cpp>=3)
+ pkg_check_modules(SYSTEMD IMPORTED_TARGET libsystemd)
+ pkg_check_modules(PAM REQUIRED IMPORTED_TARGET pam)
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index 7c66ea4..daf23ed 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -462,13 +462,13 @@ void processActionOrRPC(std::shared_ptr<RequestContext> requestCtx, const std::c
+ 
+     auto rpcReply = requestCtx->sess.sendRPC(*rpcNode, timeout);
+ 
+-    if (rpcReply.immediateChildren().empty()) {
++    if (!rpcReply || rpcReply->immediateChildren().empty()) {
+         requestCtx->res.write_head(204, {CORS});
+         requestCtx->res.end();
+         return;
+     }
+ 
+-    auto responseNode = rpcReply.child();
++    auto responseNode = rpcReply->child();
+     responseNode->unlinkWithSiblings();
+ 
+     auto envelope = ctx.newOpaqueJSON(rpcNode->schema().module().name(), "output", std::nullopt);
+-- 
+2.43.0
+

package/rousette/0026-boost-1.87-support.patch

@@ -0,0 +1,82 @@
+From d69697a719781ef06ecb0545a58c2d055ca53c6d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 3 Mar 2025 13:32:51 +0100
+Subject: [PATCH 26/44] boost 1.87 support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+In Asio 1.33 (boost 1.87) some of the deprecated functionalities were
+removed [1]. For rousette there are two changes that needed to be
+addressed:
+
+ * A removed include in clock.cpp. But actually, we do not need that
+   header at all.
+ * boost::asio::io_service is no longer around, it was actually renamed
+   to boost::asio::io_context a while ago. Its post() method is no
+   longer around as well, it was deprecated in favour of post()
+   function [2].
+   This function is there since boost 1.66, so let's set minimal boost
+   version.
+
+A bigger problem is that our dependency nghttp2-asio seems to be a dead
+project. At the time of writing this, there are no patches for more than
+3 years. However, we are not the only consumers of that project and
+somebody else already took care of that before us [3,4].
+
+[1] https://www.boost.org/doc/libs/1_87_0/doc/html/boost_asio/history.html
+[2] https://live.boost.org/doc/libs/1_86_0/doc/html/boost_asio/reference/io_context/post.html
+[3] https://github.com/nghttp2/nghttp2-asio/issues/23
+[3] https://github.com/microsoft/vcpkg/commit/8eecddf7f18792d41c58a404604eed7f87b4b462
+
+Change-Id: Ia59bb06e5f8ed222aa6e9f1c9b3947b05afeb9ec
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt           | 4 ++--
+ src/clock.cpp            | 1 -
+ src/http/EventStream.cpp | 2 +-
+ 3 files changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index cdd0eb4..ca41ef3 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -71,8 +71,8 @@ include_directories(${CMAKE_CURRENT_BINARY_DIR})
+ find_package(spdlog REQUIRED)
+ find_package(date REQUIRED) # FIXME: Remove when we have STL with __cpp_lib_chrono >= 201907 (gcc 14)
+ find_package(PkgConfig)
+-pkg_check_modules(nghttp2 REQUIRED IMPORTED_TARGET libnghttp2_asio>=0.0.90 libnghttp2)
+-find_package(Boost REQUIRED CONFIG COMPONENTS system thread)
++pkg_check_modules(nghttp2 REQUIRED IMPORTED_TARGET libnghttp2_asio>=0.0.90 libnghttp2) # To compile under boost 1.87 you have to patch nghttp2-asio using https://github.com/nghttp2/nghttp2-asio/issues/23
++find_package(Boost 1.66 REQUIRED CONFIG COMPONENTS system thread)
+ 
+ pkg_check_modules(SYSREPO-CPP REQUIRED IMPORTED_TARGET sysrepo-cpp>=5)
+ pkg_check_modules(LIBYANG-CPP REQUIRED IMPORTED_TARGET libyang-cpp>=3)
+diff --git a/src/clock.cpp b/src/clock.cpp
+index 16a49b2..7ac6c3e 100644
+--- a/src/clock.cpp
++++ b/src/clock.cpp
+@@ -5,7 +5,6 @@
+  *
+ */
+ 
+-#include <boost/asio/io_service.hpp>
+ #include <boost/lexical_cast.hpp>
+ #include <chrono>
+ #include <nghttp2/asio_http2_server.h>
+diff --git a/src/http/EventStream.cpp b/src/http/EventStream.cpp
+index 34038f4..6c765c5 100644
+--- a/src/http/EventStream.cpp
++++ b/src/http/EventStream.cpp
+@@ -117,6 +117,6 @@ void EventStream::enqueue(const std::string& what)
+     spdlog::trace("{}: new event, ∑ queue size = {}", peer, len);
+     queue.push_back(buf);
+     state = HasEvents;
+-    res.io_service().post([&res = this->res]() { res.resume(); });
++    boost::asio::post(res.io_service(), [&res = this->res]() { res.resume(); });
+ }
+ }
+-- 
+2.43.0
+

package/rousette/0027-restconf-refactor-uri-parser-for-stream-URIs.patch

@@ -0,0 +1,196 @@
+From 97ceef119c900c37bbaa27860c3b43cfa6d69f95 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 13 Jan 2025 13:01:07 +0100
+Subject: [PATCH 27/44] restconf: refactor uri parser for stream URIs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+This is a preparation for the upcoming patch that will add support for
+subscribed streams. I will use boost spirit x3 parser to parse such
+URIs so I need to refactor the existing parser, which is not really a
+parser, but we only match for the two known URIs.
+
+Change-Id: Ib76973cd967fc3e9558ceb6be8f51239ce4c5ef3
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 15 +--------------
+ src/restconf/uri.cpp    | 36 +++++++++++++++++++++++++++---------
+ src/restconf/uri.h      | 11 ++++++-----
+ src/restconf/uri_impl.h |  2 ++
+ tests/uri-parser.cpp    |  4 ++--
+ 5 files changed, 38 insertions(+), 30 deletions(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index daf23ed..d356f7e 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -874,7 +874,6 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+ 
+     server->handle(netconfStreamRoot, [this, conn](const auto& req, const auto& res) mutable {
+         auto sess = conn.sessionStart();
+-        libyang::DataFormat dataFormat;
+         std::optional<std::string> xpathFilter;
+         std::optional<sysrepo::NotificationTimeStamp> startTime;
+         std::optional<sysrepo::NotificationTimeStamp> stopTime;
+@@ -890,18 +889,6 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+ 
+             auto streamRequest = asRestconfStreamRequest(req.method(), req.uri().path, req.uri().raw_query);
+ 
+-            switch(streamRequest.type) {
+-            case RestconfStreamRequest::Type::NetconfNotificationJSON:
+-                dataFormat = libyang::DataFormat::JSON;
+-                break;
+-            case RestconfStreamRequest::Type::NetconfNotificationXML:
+-                dataFormat = libyang::DataFormat::XML;
+-                break;
+-            default:
+-                // GCC 14 complains about uninitialized variable, but asRestconfStreamRequest() would have thrown
+-                __builtin_unreachable();
+-            }
+-
+             if (auto it = streamRequest.queryParams.find("filter"); it != streamRequest.queryParams.end()) {
+                 xpathFilter = std::get<std::string>(it->second);
+             }
+@@ -916,7 +903,7 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+             // The signal is constructed outside NotificationStream class because it is required to be passed to
+             // NotificationStream's parent (EventStream) constructor where it already must be constructed
+             // Yes, this is a hack.
+-            auto client = std::make_shared<NotificationStream>(req, res, std::make_shared<rousette::http::EventStream::Signal>(), sess, dataFormat, xpathFilter, startTime, stopTime);
++            auto client = std::make_shared<NotificationStream>(req, res, std::make_shared<rousette::http::EventStream::Signal>(), sess, streamRequest.type.encoding, xpathFilter, startTime, stopTime);
+             client->activate();
+         } catch (const auth::Error& e) {
+             processAuthError(req, res, e, [&res]() {
+diff --git a/src/restconf/uri.cpp b/src/restconf/uri.cpp
+index da1e3a5..e95d70e 100644
+--- a/src/restconf/uri.cpp
++++ b/src/restconf/uri.cpp
+@@ -57,6 +57,13 @@ const auto resources = x3::rule<class resources, URIPath>{"resources"} =
+     ((x3::lit("/") | x3::eps) /* /restconf/ and /restconf */ >> x3::attr(URIPrefix{URIPrefix::Type::RestconfRoot}) >> x3::attr(std::vector<PathSegment>{}));
+ const auto uriGrammar = x3::rule<class grammar, URIPath>{"grammar"} = x3::lit("/restconf") >> resources;
+ 
++
++const auto netconfStream = x3::rule<class netconfStream, RestconfStreamRequest::NetconfStream>{"netconfStream"} =
++    x3::lit("/NETCONF") >>
++    ((x3::lit("/XML") >> x3::attr(libyang::DataFormat::XML)) |
++     (x3::lit("/JSON") >> x3::attr(libyang::DataFormat::JSON)));
++const auto streamUriGrammar = x3::rule<class grammar, RestconfStreamRequest::NetconfStream>{"streamsGrammar"} = x3::lit("/streams") >> netconfStream;
++
+ // clang-format on
+ }
+ 
+@@ -197,6 +204,17 @@ std::optional<queryParams::QueryParams> parseQueryParams(const std::string& quer
+     return ret;
+ }
+ 
++std::optional<RestconfStreamRequest::NetconfStream> parseStreamUri(const std::string& uriPath)
++{
++    std::optional<RestconfStreamRequest::NetconfStream> ret;
++
++    if (!x3::parse(std::begin(uriPath), std::end(uriPath), streamUriGrammar >> x3::eoi, ret)) {
++        return std::nullopt;
++    }
++
++    return ret;
++}
++
+ URIPrefix::URIPrefix()
+     : resourceType(URIPrefix::Type::BasicRestconfData)
+ {
+@@ -637,20 +655,20 @@ std::optional<std::variant<libyang::Module, libyang::SubmoduleParsed>> asYangMod
+     return std::nullopt;
+ }
+ 
+-RestconfStreamRequest asRestconfStreamRequest(const std::string& httpMethod, const std::string& uriPath, const std::string& uriQueryString)
++RestconfStreamRequest::NetconfStream::NetconfStream() = default;
++RestconfStreamRequest::NetconfStream::NetconfStream(const libyang::DataFormat& encoding)
++    : encoding(encoding)
+ {
+-    static const auto netconfStreamRoot = "/streams/NETCONF/";
+-    RestconfStreamRequest::Type type;
++}
+ 
++RestconfStreamRequest asRestconfStreamRequest(const std::string& httpMethod, const std::string& uriPath, const std::string& uriQueryString)
++{
+     if (httpMethod != "GET" && httpMethod != "HEAD") {
+         throw ErrorResponse(405, "application", "operation-not-supported", "Method not allowed.");
+     }
+ 
+-    if (uriPath == netconfStreamRoot + "XML"s) {
+-        type = RestconfStreamRequest::Type::NetconfNotificationXML;
+-    } else if (uriPath == netconfStreamRoot + "JSON"s) {
+-        type = RestconfStreamRequest::Type::NetconfNotificationJSON;
+-    } else {
++    auto type = impl::parseStreamUri(uriPath);
++    if (!type) {
+         throw ErrorResponse(404, "application", "invalid-value", "Invalid stream");
+     }
+ 
+@@ -661,7 +679,7 @@ RestconfStreamRequest asRestconfStreamRequest(const std::string& httpMethod, con
+ 
+     validateQueryParametersForStream(*queryParameters);
+ 
+-    return {type, *queryParameters};
++    return {*type, *queryParameters};
+ }
+ 
+ /** @brief Returns a set of allowed HTTP methods for given URI. Usable for the 'allow' header */
+diff --git a/src/restconf/uri.h b/src/restconf/uri.h
+index f6df724..6f1f69f 100644
+--- a/src/restconf/uri.h
++++ b/src/restconf/uri.h
+@@ -197,11 +197,12 @@ struct RestconfRequest {
+ };
+ 
+ struct RestconfStreamRequest {
+-    enum class Type {
+-        NetconfNotificationJSON,
+-        NetconfNotificationXML,
+-    };
+-    Type type;
++    struct NetconfStream {
++        libyang::DataFormat encoding;
++
++        NetconfStream();
++        NetconfStream(const libyang::DataFormat& encoding);
++    } type;
+     queryParams::QueryParams queryParams;
+ };
+ 
+diff --git a/src/restconf/uri_impl.h b/src/restconf/uri_impl.h
+index 2bcdb3f..00b22f6 100644
+--- a/src/restconf/uri_impl.h
++++ b/src/restconf/uri_impl.h
+@@ -66,6 +66,8 @@ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::impl::YangModule, name, revision);
+ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::PathSegment, apiIdent, keys);
+ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::ApiIdentifier, prefix, identifier);
+ 
++BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::RestconfStreamRequest::NetconfStream, encoding);
++
+ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::queryParams::fields::ParenExpr, lhs, rhs);
+ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::queryParams::fields::SlashExpr, lhs, rhs);
+ BOOST_FUSION_ADAPT_STRUCT(rousette::restconf::queryParams::fields::SemiExpr, lhs, rhs);
+diff --git a/tests/uri-parser.cpp b/tests/uri-parser.cpp
+index fd5dd8b..53d1fbb 100644
+--- a/tests/uri-parser.cpp
++++ b/tests/uri-parser.cpp
+@@ -1072,13 +1072,13 @@ TEST_CASE("URI path parser")
+ 
+         {
+             auto [type, queryParams] = asRestconfStreamRequest("GET", "/streams/NETCONF/XML", "");
+-            REQUIRE(type == RestconfStreamRequest::Type::NetconfNotificationXML);
++            REQUIRE(type.encoding == libyang::DataFormat::XML);
+             REQUIRE(queryParams.empty());
+         }
+ 
+         {
+             auto [type, queryParams] = asRestconfStreamRequest("GET", "/streams/NETCONF/JSON", "");
+-            REQUIRE(type == RestconfStreamRequest::Type::NetconfNotificationJSON);
++            REQUIRE(type.encoding == libyang::DataFormat::JSON);
+             REQUIRE(queryParams.empty());
+         }
+ 
+-- 
+2.43.0
+

package/rousette/0028-server-prepare-checking-if-yang-features-are-enabled.patch

@@ -0,0 +1,54 @@
+From cc815dac4ea17ccb09a0481ad82745a194efe95f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 27 Jan 2025 19:17:07 +0100
+Subject: [PATCH 28/44] server: prepare checking if yang features are enabled
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+We are not requiring any now, but next commits will need it. I am
+splitting this into a separate commit for clarity.
+
+Change-Id: I0a8874b55b21d5ed6c7222f0c36a36c3c5ff52c5
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 22 ++++++++++++++--------
+ 1 file changed, 14 insertions(+), 8 deletions(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index d356f7e..55e504a 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -817,14 +817,20 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+     , server{std::make_unique<nghttp2::asio_http2::server::http2>()}
+     , dwdmEvents{std::make_unique<sr::OpticalEvents>(conn.sessionStart())}
+ {
+-    for (const auto& [module, version] : {
+-             std::pair<std::string, std::string>{"ietf-restconf", "2017-01-26"},
+-             {"ietf-restconf-monitoring", "2017-01-26"},
+-             {"ietf-netconf", ""},
+-             {"ietf-yang-library", "2019-01-04"},
+-             {"ietf-yang-patch", "2017-02-22"},
+-             }) {
+-        if (!conn.sessionStart().getContext().getModuleImplemented(module)) {
++    for (const auto& [module, version, features] : {
++             std::tuple<std::string, std::string, std::vector<std::string>>{"ietf-restconf", "2017-01-26", {}},
++             {"ietf-restconf-monitoring", "2017-01-26", {}},
++             {"ietf-netconf", "", {}},
++             {"ietf-yang-library", "2019-01-04", {}},
++             {"ietf-yang-patch", "2017-02-22", {}},
++         }) {
++        if (auto mod = conn.sessionStart().getContext().getModuleImplemented(module)) {
++            for (const auto& feature : features) {
++                if (!mod->featureEnabled(feature)) {
++                    throw std::runtime_error("Module "s + module + "@" + version + " does not implement feature " + feature);
++                }
++            }
++        } else {
+             throw std::runtime_error("Module "s + module + "@" + version + " is not implemented in sysrepo");
+         }
+     }
+-- 
+2.43.0
+

package/rousette/0029-tests-refactor-default-handling.patch

@@ -0,0 +1,54 @@
+From f45d7cab63431c94a4db859b07ea6f503214ebaa Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 13 Mar 2025 17:10:17 +0100
+Subject: [PATCH 29/44] tests: refactor default handling
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+...so that a followup commit which uses
+libyang::PrintFlags::KeepEmptyCont introduces less noise.
+
+Change-Id: I587cf8a5fc0e87b37f4bb91a74d848f58b61e336
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ tests/restconf-defaults.cpp | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/tests/restconf-defaults.cpp b/tests/restconf-defaults.cpp
+index dd8b4da..d5c6004 100644
+--- a/tests/restconf-defaults.cpp
++++ b/tests/restconf-defaults.cpp
+@@ -32,7 +32,7 @@ TEST_CASE("default handling")
+     auto server = rousette::restconf::Server{srConn, SERVER_ADDRESS, SERVER_PORT};
+ 
+     // default value of /example:a/b/c/enabled is implicitly set so it should not be printed
+-    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a", {}) == Response{200, jsonHeaders, R"({
++    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c", {}) == Response{200, jsonHeaders, R"({
+ 
+ }
+ )"});
+@@ -72,7 +72,7 @@ TEST_CASE("default handling")
+ )"});
+ 
+     // default value is explicitly set so it should be printed
+-    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a", {}) == Response{200, jsonHeaders, R"({
++    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c", {}) == Response{200, jsonHeaders, R"({
+   "example:a": {
+     "b": {
+       "c": {
+@@ -86,8 +86,8 @@ TEST_CASE("default handling")
+     // RFC 6243, sec. 2.3.3: A valid 'delete' operation attribute for a data node that has been set by a client to its schema default value MUST succeed.
+     REQUIRE(httpDelete(RESTCONF_DATA_ROOT "/example:a/b/c/enabled", {AUTH_ROOT}) == Response{204, noContentTypeHeaders, ""});
+ 
+-    // default value is implicitly set so it should be printed
+-    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a", {}) == Response{200, jsonHeaders, R"({
++    // default value is only there implicitly, so it should *not* be printed
++    REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c", {}) == Response{200, jsonHeaders, R"({
+ 
+ }
+ )"});
+-- 
+2.43.0
+

package/rousette/0030-Always-print-empty-containers-in-user-defined-conten.patch

@@ -0,0 +1,356 @@
+From 22442d322bda3d83457dd0f1da45d95a10e93081 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 13 Mar 2025 17:32:59 +0100
+Subject: [PATCH 30/44] Always print empty containers in user-defined content
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+There's some subtle interaction between depth-limited printing, default
+values, and empty non-presence containers. In order to prepare for an
+upstream change in sysrepo which fixed depth-limited printing, let's
+stick to "always" printing the empty non-presence containers.
+
+(It actually isn't "always" because the data such as error reports,
+patches, etc., are still printed using the default settings. But the
+data which is subject to user-defined constraints is now consistent.)
+
+Change-Id: Ie2d6ad2e851d667e7e7582fcd0ac75dabce2c05e
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp     |  4 +-
+ src/restconf/utils/yang.cpp |  2 +-
+ src/sr/AllEvents.cpp        |  2 +-
+ src/sr/OpticalEvents.cpp    |  2 +-
+ tests/restconf-defaults.cpp | 12 +++++-
+ tests/restconf-nacm.cpp     | 12 +++++-
+ tests/restconf-reading.cpp  | 79 ++++++++++++++++++++++++++++++++++---
+ 7 files changed, 98 insertions(+), 15 deletions(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index 55e504a..bae3992 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -478,7 +478,7 @@ void processActionOrRPC(std::shared_ptr<RequestContext> requestCtx, const std::c
+                                         contentType(requestCtx->dataFormat.response),
+                                         CORS,
+                                     });
+-    requestCtx->res.end(*envelope->printStr(requestCtx->dataFormat.response, libyang::PrintFlags::WithSiblings));
++    requestCtx->res.end(*envelope->printStr(requestCtx->dataFormat.response, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont));
+ }
+ 
+ void processPost(std::shared_ptr<RequestContext> requestCtx, const std::chrono::milliseconds timeout)
+@@ -768,7 +768,7 @@ libyang::PrintFlags libyangPrintFlags(const libyang::DataNode& dataNode, const s
+     } catch(const libyang::Error& e) {
+     }
+ 
+-    libyang::PrintFlags ret = libyang::PrintFlags::WithSiblings;
++    libyang::PrintFlags ret = libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont;
+ 
+     if (!withDefaults && node && (node->schema().nodeType() == libyang::NodeType::Leaf || node->schema().nodeType() == libyang::NodeType::Leaflist) && node->asTerm().isImplicitDefault()) {
+         return ret | libyang::PrintFlags::WithDefaultsAll;
+diff --git a/src/restconf/utils/yang.cpp b/src/restconf/utils/yang.cpp
+index 30661fc..8acb160 100644
+--- a/src/restconf/utils/yang.cpp
++++ b/src/restconf/utils/yang.cpp
+@@ -111,7 +111,7 @@ std::string as_restconf_notification(const libyang::Context& ctx, libyang::DataF
+     envelope->insertChild(*eventTime);
+     envelope->insertChild(notification);
+ 
+-    auto res = *envelope->printStr(dataFormat, libyang::PrintFlags::WithSiblings);
++    auto res = *envelope->printStr(dataFormat, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont);
+ 
+     // notification node comes from sysrepo and sysrepo will free this; if not unlinked then envelope destructor would try to free this as well
+     notification.unlink();
+diff --git a/src/sr/AllEvents.cpp b/src/sr/AllEvents.cpp
+index 6e2a21c..2aca4c7 100644
+--- a/src/sr/AllEvents.cpp
++++ b/src/sr/AllEvents.cpp
+@@ -109,7 +109,7 @@ sysrepo::ErrorCode AllEvents::onChange(sysrepo::Session session, const std::stri
+                 break;
+             }
+         };
+-        auto json = *copy.printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings);
++        auto json = *copy.printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont);
+         spdlog::info("JSON: {}", json);
+         spdlog::warn("FULL JSON: {}",
+                 *session.getData('/' + module + ":*")->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings));
+diff --git a/src/sr/OpticalEvents.cpp b/src/sr/OpticalEvents.cpp
+index 8c5feff..25906a8 100644
+--- a/src/sr/OpticalEvents.cpp
++++ b/src/sr/OpticalEvents.cpp
+@@ -15,7 +15,7 @@
+ namespace {
+ std::string dumpDataFrom(sysrepo::Session session, const std::string& module)
+ {
+-    return *session.getData('/' + module + ":*")->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings);
++    return *session.getData('/' + module + ":*")->printStr(libyang::DataFormat::JSON, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont);
+ }
+ }
+ 
+diff --git a/tests/restconf-defaults.cpp b/tests/restconf-defaults.cpp
+index d5c6004..89083f1 100644
+--- a/tests/restconf-defaults.cpp
++++ b/tests/restconf-defaults.cpp
+@@ -33,7 +33,11 @@ TEST_CASE("default handling")
+ 
+     // default value of /example:a/b/c/enabled is implicitly set so it should not be printed
+     REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c", {}) == Response{200, jsonHeaders, R"({
+-
++  "example:a": {
++    "b": {
++      "c": {}
++    }
++  }
+ }
+ )"});
+ 
+@@ -88,7 +92,11 @@ TEST_CASE("default handling")
+ 
+     // default value is only there implicitly, so it should *not* be printed
+     REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c", {}) == Response{200, jsonHeaders, R"({
+-
++  "example:a": {
++    "b": {
++      "c": {}
++    }
++  }
+ }
+ )"});
+ }
+diff --git a/tests/restconf-nacm.cpp b/tests/restconf-nacm.cpp
+index 29d7723..51328f3 100644
+--- a/tests/restconf-nacm.cpp
++++ b/tests/restconf-nacm.cpp
+@@ -130,6 +130,9 @@ TEST_CASE("NACM")
+     "clock": {
+       "timezone-utc-offset": 2
+     },
++    "dns-resolver": {
++      "options": {}
++    },
+     "radius": {
+       "server": [
+         {
+@@ -139,7 +142,8 @@ TEST_CASE("NACM")
+             "shared-secret": "shared-secret"
+           }
+         }
+-      ]
++      ],
++      "options": {}
+     }
+   }
+ }
+@@ -207,6 +211,9 @@ TEST_CASE("NACM")
+     "clock": {
+       "timezone-utc-offset": 2
+     },
++    "dns-resolver": {
++      "options": {}
++    },
+     "radius": {
+       "server": [
+         {
+@@ -216,7 +223,8 @@ TEST_CASE("NACM")
+             "shared-secret": "shared-secret"
+           }
+         }
+-      ]
++      ],
++      "options": {}
+     }
+   }
+ }
+diff --git a/tests/restconf-reading.cpp b/tests/restconf-reading.cpp
+index e709486..ffdb047 100644
+--- a/tests/restconf-reading.cpp
++++ b/tests/restconf-reading.cpp
+@@ -62,10 +62,22 @@ TEST_CASE("reading data")
+         // this relies on a NACM rule for anonymous access that filters out "a lot of stuff"
+         REQUIRE(get(RESTCONF_DATA_ROOT, {}) == Response{200, jsonHeaders, R"({
+   "example:top-level-leaf": "moo",
++  "example:tlc": {},
++  "example:a": {
++    "b": {
++      "c": {}
++    },
++    "b1": {},
++    "example-augment:b": {
++      "c": {}
++    }
++  },
++  "example:two-leafs": {},
+   "example:config-nonconfig": {
+     "config-node": "foo-config-true",
+     "nonconfig-node": "foo-config-false"
+   },
++  "example:ordered-lists": {},
+   "ietf-restconf-monitoring:restconf-state": {
+     "capabilities": {
+       "capability": [
+@@ -107,10 +119,22 @@ TEST_CASE("reading data")
+ 
+         REQUIRE(get(RESTCONF_ROOT_DS("operational"), {}) == Response{200, jsonHeaders, R"({
+   "example:top-level-leaf": "moo",
++  "example:tlc": {},
++  "example:a": {
++    "b": {
++      "c": {}
++    },
++    "b1": {},
++    "example-augment:b": {
++      "c": {}
++    }
++  },
++  "example:two-leafs": {},
+   "example:config-nonconfig": {
+     "config-node": "foo-config-true",
+     "nonconfig-node": "foo-config-false"
+   },
++  "example:ordered-lists": {},
+   "ietf-restconf-monitoring:restconf-state": {
+     "capabilities": {
+       "capability": [
+@@ -152,9 +176,21 @@ TEST_CASE("reading data")
+ 
+         REQUIRE(get(RESTCONF_ROOT_DS("running"), {}) == Response{200, jsonHeaders, R"({
+   "example:top-level-leaf": "moo",
++  "example:tlc": {},
++  "example:a": {
++    "b": {
++      "c": {}
++    },
++    "b1": {},
++    "example-augment:b": {
++      "c": {}
++    }
++  },
++  "example:two-leafs": {},
+   "example:config-nonconfig": {
+     "config-node": "foo-config-true"
+-  }
++  },
++  "example:ordered-lists": {}
+ }
+ )"});
+     }
+@@ -213,7 +249,8 @@ TEST_CASE("reading data")
+         {
+           "name": "a"
+         }
+-      ]
++      ],
++      "options": {}
+     }
+   }
+ }
+@@ -244,7 +281,8 @@ TEST_CASE("reading data")
+             "shared-secret": "shared-secret"
+           }
+         }
+-      ]
++      ],
++      "options": {}
+     }
+   }
+ }
+@@ -714,6 +752,7 @@ TEST_CASE("reading data")
+         "enabled": true
+       }
+     },
++    "b1": {},
+     "example-augment:b": {
+       "c": {
+         "enabled": true
+@@ -723,9 +762,18 @@ TEST_CASE("reading data")
+ }
+ )"});
+             REQUIRE(get(RESTCONF_DATA_ROOT "/example:a?with-defaults=explicit", {}) == Response{200, jsonHeaders, R"({
+-
++  "example:a": {
++    "b": {
++      "c": {}
++    },
++    "b1": {},
++    "example-augment:b": {
++      "c": {}
++    }
++  }
+ }
+ )"});
++            // FIXME: libyang is not really consistent in printing of NP-containers when trimming away the defaults...
+             REQUIRE(get(RESTCONF_DATA_ROOT "/example:a?with-defaults=trim", {}) == Response{200, jsonHeaders, R"({
+ 
+ }
+@@ -740,6 +788,7 @@ TEST_CASE("reading data")
+         }
+       }
+     },
++    "b1": {},
+     "example-augment:b": {
+       "c": {
+         "enabled": true,
+@@ -766,6 +815,7 @@ TEST_CASE("reading data")
+         "enabled": true
+       }
+     },
++    "b1": {},
+     "example-augment:b": {
+       "c": {
+         "enabled": true
+@@ -781,13 +831,24 @@ TEST_CASE("reading data")
+       "c": {
+         "enabled": true
+       }
++    },
++    "b1": {},
++    "example-augment:b": {
++      "c": {}
+     }
+   }
+ }
+ )"});
+ 
++            // FIXME: libyang is not consistent here:
++            // - /example:a/b/c NP-container *is* printed,
++            // - /example:a/example-augment:b/c NP-container is *not* printed
+             REQUIRE(get(RESTCONF_DATA_ROOT "/example:a?with-defaults=trim", {}) == Response{200, jsonHeaders, R"({
+-
++  "example:a": {
++    "b": {
++      "c": {}
++    }
++  }
+ }
+ )"});
+ 
+@@ -801,6 +862,7 @@ TEST_CASE("reading data")
+         }
+       }
+     },
++    "b1": {},
+     "example-augment:b": {
+       "c": {
+         "enabled": true,
+@@ -830,10 +892,15 @@ TEST_CASE("reading data")
+ )"});
+ 
+         REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c/enabled?with-defaults=explicit", {}) == Response{200, jsonHeaders, R"({
+-
++  "example:a": {
++    "b": {
++      "c": {}
++    }
++  }
+ }
+ )"});
+ 
++        // again, libyang is not 100% consistent in the `trim` mode
+         REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c/enabled?with-defaults=trim", {}) == Response{200, jsonHeaders, R"({
+ 
+ }
+-- 
+2.43.0
+

package/rousette/0031-fix-a-typo-in-RFC-number.patch

@@ -0,0 +1,31 @@
+From 818af7ec1dc890774603dbf11ed81cf64d89a628 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 13 Mar 2025 17:56:50 +0100
+Subject: [PATCH 31/44] fix a typo in RFC number
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I81b68b3920c41129cb98728481580699e44e8c20
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ tests/restconf-reading.cpp | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tests/restconf-reading.cpp b/tests/restconf-reading.cpp
+index ffdb047..38f5496 100644
+--- a/tests/restconf-reading.cpp
++++ b/tests/restconf-reading.cpp
+@@ -879,7 +879,7 @@ TEST_CASE("reading data")
+ 
+     SECTION("Implicit node with default value")
+     {
+-        // RFC 4080, 3.5.4: If target of the query is implicitly created node with default value, ignore basic mode
++        // RFC 8040, 3.5.4: If target of the query is implicitly created node with default value, ignore basic mode
+         REQUIRE(get(RESTCONF_DATA_ROOT "/example:a/b/c/enabled", {}) == Response{200, jsonHeaders, R"({
+   "example:a": {
+     "b": {
+-- 
+2.43.0
+

package/rousette/0032-Fix-bug-in-depth-processing.patch

@@ -0,0 +1,104 @@
+From 9997d61dc43775444e4d78c37054a30b602c2603 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Thu, 13 Mar 2025 18:11:39 +0100
+Subject: [PATCH 32/44] Fix bug in depth= processing
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+...which got fixed upstream in sysrepo.
+
+Change-Id: Ida37c48058488be32230165b8b4f45c6bd5a4d3a
+Depends-on: https://gerrit.cesnet.cz/c/CzechLight/dependencies/+/8429
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt             |  1 +
+ tests/restconf-reading.cpp | 45 ++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 46 insertions(+)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index ca41ef3..272caad 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -74,6 +74,7 @@ find_package(PkgConfig)
+ pkg_check_modules(nghttp2 REQUIRED IMPORTED_TARGET libnghttp2_asio>=0.0.90 libnghttp2) # To compile under boost 1.87 you have to patch nghttp2-asio using https://github.com/nghttp2/nghttp2-asio/issues/23
+ find_package(Boost 1.66 REQUIRED CONFIG COMPONENTS system thread)
+ 
++pkg_check_modules(SYSREPO REQUIRED sysrepo>=3.6.5 IMPORTED_TARGET)
+ pkg_check_modules(SYSREPO-CPP REQUIRED IMPORTED_TARGET sysrepo-cpp>=5)
+ pkg_check_modules(LIBYANG-CPP REQUIRED IMPORTED_TARGET libyang-cpp>=3)
+ pkg_check_modules(SYSTEMD IMPORTED_TARGET libsystemd)
+diff --git a/tests/restconf-reading.cpp b/tests/restconf-reading.cpp
+index 38f5496..f87c4f5 100644
+--- a/tests/restconf-reading.cpp
++++ b/tests/restconf-reading.cpp
+@@ -243,6 +243,13 @@ TEST_CASE("reading data")
+ )"});
+ 
+         REQUIRE(get(RESTCONF_DATA_ROOT "/ietf-system:system/radius?depth=1", {AUTH_DWDM}) == Response{200, jsonHeaders, R"({
++  "ietf-system:system": {
++    "radius": {}
++  }
++}
++)"});
++
++        REQUIRE(get(RESTCONF_DATA_ROOT "/ietf-system:system/radius?depth=2", {AUTH_DWDM}) == Response{200, jsonHeaders, R"({
+   "ietf-system:system": {
+     "radius": {
+       "server": [
+@@ -1026,6 +1033,25 @@ TEST_CASE("reading data")
+ }
+ )"});
+         REQUIRE(get(RESTCONF_DATA_ROOT "/example:tlc/list=blabla?fields=nested/data&depth=1", {}) == Response{200, jsonHeaders, R"({
++  "example:tlc": {
++    "list": [
++      {
++        "name": "blabla",
++        "nested": [
++          {
++            "first": "1",
++            "second": 2,
++            "third": "3",
++            "data": {}
++          }
++        ]
++      }
++    ]
++  }
++}
++)"});
++
++        REQUIRE(get(RESTCONF_DATA_ROOT "/example:tlc/list=blabla?fields=nested/data&depth=2", {}) == Response{200, jsonHeaders, R"({
+   "example:tlc": {
+     "list": [
+       {
+@@ -1049,6 +1075,25 @@ TEST_CASE("reading data")
+ 
+         // whole datastore with fields filtering
+         REQUIRE(get(RESTCONF_DATA_ROOT "?fields=example:tlc/list/nested/data&depth=1", {}) == Response{200, jsonHeaders, R"({
++  "example:tlc": {
++    "list": [
++      {
++        "name": "blabla",
++        "nested": [
++          {
++            "first": "1",
++            "second": 2,
++            "third": "3",
++            "data": {}
++          }
++        ]
++      }
++    ]
++  }
++}
++)"});
++
++        REQUIRE(get(RESTCONF_DATA_ROOT "?fields=example:tlc/list/nested/data&depth=2", {}) == Response{200, jsonHeaders, R"({
+   "example:tlc": {
+     "list": [
+       {
+-- 
+2.43.0
+

package/rousette/0033-Adapt-to-libyang-cpp-API-break-in-opaque-nodes.patch

@@ -0,0 +1,89 @@
+From 009b2b01fb4a1ca854402debd66d899a264db8f2 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Fri, 14 Mar 2025 13:57:26 +0100
+Subject: [PATCH 33/44] Adapt to libyang-cpp API break in opaque nodes
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+I was wondering for a while whether libyang will do the right thing when
+printing the RPC's output nodes in XML, but apparently it does (and we
+have a test for that).
+
+Depends-on: https://gerrit.cesnet.cz/c/CzechLight/dependencies/+/8438
+Change-Id: I82425743fd2613fcbe2b696848e2feb1c47fc658
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ CMakeLists.txt              | 2 +-
+ src/restconf/Server.cpp     | 5 +++--
+ src/restconf/utils/yang.cpp | 9 +++++----
+ 3 files changed, 9 insertions(+), 7 deletions(-)
+
+diff --git a/CMakeLists.txt b/CMakeLists.txt
+index 272caad..bcabe84 100644
+--- a/CMakeLists.txt
++++ b/CMakeLists.txt
+@@ -76,7 +76,7 @@ find_package(Boost 1.66 REQUIRED CONFIG COMPONENTS system thread)
+ 
+ pkg_check_modules(SYSREPO REQUIRED sysrepo>=3.6.5 IMPORTED_TARGET)
+ pkg_check_modules(SYSREPO-CPP REQUIRED IMPORTED_TARGET sysrepo-cpp>=5)
+-pkg_check_modules(LIBYANG-CPP REQUIRED IMPORTED_TARGET libyang-cpp>=3)
++pkg_check_modules(LIBYANG-CPP REQUIRED IMPORTED_TARGET libyang-cpp>=4)
+ pkg_check_modules(SYSTEMD IMPORTED_TARGET libsystemd)
+ pkg_check_modules(PAM REQUIRED IMPORTED_TARGET pam)
+ pkg_check_modules(DOCOPT REQUIRED IMPORTED_TARGET docopt)
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index bae3992..28e2e4c 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -471,7 +471,8 @@ void processActionOrRPC(std::shared_ptr<RequestContext> requestCtx, const std::c
+     auto responseNode = rpcReply->child();
+     responseNode->unlinkWithSiblings();
+ 
+-    auto envelope = ctx.newOpaqueJSON(rpcNode->schema().module().name(), "output", std::nullopt);
++    // libyang auto-resolves the XML namespace when the result is printed into XML
++    auto envelope = ctx.newOpaqueJSON({rpcNode->schema().module().name(), rpcNode->schema().module().name(), "output"}, std::nullopt);
+     envelope->insertChild(*responseNode);
+ 
+     requestCtx->res.write_head(200, {
+@@ -735,7 +736,7 @@ libyang::DataNode apiResource(const libyang::Context& ctx, const RestconfRequest
+             }
+ 
+             for (const auto& rpc : mod.actionRpcs()) {
+-                operations.insertChild(*ctx.newOpaqueJSON(rpc.module().name(), rpc.name(), libyang::JSON{"[null]"}));
++                operations.insertChild(*ctx.newOpaqueJSON({rpc.module().name(), rpc.module().name(), rpc.name()}, libyang::JSON{"[null]"}));
+             }
+         }
+     } else {
+diff --git a/src/restconf/utils/yang.cpp b/src/restconf/utils/yang.cpp
+index 8acb160..9358840 100644
+--- a/src/restconf/utils/yang.cpp
++++ b/src/restconf/utils/yang.cpp
+@@ -89,6 +89,7 @@ std::string as_restconf_notification(const libyang::Context& ctx, libyang::DataF
+ {
+     static const auto jsonNamespace = "ietf-restconf";
+     static const auto xmlNamespace = "urn:ietf:params:xml:ns:netconf:notification:1.0";
++    static const auto xmlPrefix = "ietf-netconf-notifications";
+ 
+     std::optional<libyang::DataNode> envelope;
+     std::optional<libyang::DataNode> eventTime;
+@@ -96,11 +97,11 @@ std::string as_restconf_notification(const libyang::Context& ctx, libyang::DataF
+ 
+     /* The namespaces for XML and JSON envelopes are different. See https://datatracker.ietf.org/doc/html/rfc8040#section-6.4 */
+     if (dataFormat == libyang::DataFormat::JSON) {
+-        envelope = ctx.newOpaqueJSON(jsonNamespace, "notification", std::nullopt);
+-        eventTime = ctx.newOpaqueJSON(jsonNamespace, "eventTime", libyang::JSON{timeStr});
++        envelope = ctx.newOpaqueJSON({jsonNamespace, jsonNamespace, "notification"}, std::nullopt);
++        eventTime = ctx.newOpaqueJSON({jsonNamespace, jsonNamespace, "eventTime"}, libyang::JSON{timeStr});
+     } else {
+-        envelope = ctx.newOpaqueXML(xmlNamespace, "notification", std::nullopt);
+-        eventTime = ctx.newOpaqueXML(xmlNamespace, "eventTime", libyang::XML{timeStr});
++        envelope = ctx.newOpaqueXML({xmlNamespace, xmlPrefix, "notification"}, std::nullopt);
++        eventTime = ctx.newOpaqueXML({xmlNamespace, xmlPrefix, "eventTime"}, libyang::XML{timeStr});
+     }
+ 
+     // the notification data node holds only the notification data tree but for nested notification we should print the whole YANG data tree
+-- 
+2.43.0
+

package/rousette/0034-Fix-XML-serialization-when-listing-RPCs.patch

@@ -0,0 +1,122 @@
+From 061d960d9435018aaba3b2d1b4d857ddb8836d1b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Fri, 14 Mar 2025 15:38:44 +0100
+Subject: [PATCH 34/44] Fix XML serialization when listing RPCs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+The RFC says [1] that each RPC entry that's listed in the reply should
+look like this when serialized into the XML format:
+
+ <system-restart xmlns='urn:ietf:params:xml:ns:yang:ietf-system'/>
+
+Our old code would, due to the way how libyang deals with opaque nodes,
+just try to dump the JSON-ish `[null]` bits in there, which is wrong.
+
+[1] https://datatracker.ietf.org/doc/html/rfc8040#page-84
+
+Change-Id: I6ea433dbd3fcf3ca2883d3fa00c9d215c0e1bb4f
+Depends-on: https://gerrit.cesnet.cz/c/CzechLight/br2-external/+/8443
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 16 +++++++++++++---
+ tests/restconf-rpc.cpp  | 33 ++++++++++++++++++++++++++++++++-
+ 2 files changed, 45 insertions(+), 4 deletions(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index 28e2e4c..05239e9 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -712,7 +712,7 @@ void processPutOrPlainPatch(std::shared_ptr<RequestContext> requestCtx, const st
+ }
+ 
+ /** @brief Build data trees for endpoints returning ietf-restconf:restconf data */
+-libyang::DataNode apiResource(const libyang::Context& ctx, const RestconfRequest::Type& type)
++libyang::DataNode apiResource(const libyang::Context& ctx, const RestconfRequest::Type& type, libyang::DataFormat dataFormat)
+ {
+     const auto yangLib = *ctx.getModuleLatest("ietf-yang-library");
+     const auto yangApiExt = ctx.getModuleImplemented("ietf-restconf")->extensionInstance("yang-api");
+@@ -736,7 +736,16 @@ libyang::DataNode apiResource(const libyang::Context& ctx, const RestconfRequest
+             }
+ 
+             for (const auto& rpc : mod.actionRpcs()) {
+-                operations.insertChild(*ctx.newOpaqueJSON({rpc.module().name(), rpc.module().name(), rpc.name()}, libyang::JSON{"[null]"}));
++                switch (dataFormat) {
++                case libyang::DataFormat::JSON:
++                    operations.insertChild(*ctx.newOpaqueJSON({rpc.module().name(), rpc.module().name(), rpc.name()}, libyang::JSON{"[null]"}));
++                    break;
++                case libyang::DataFormat::XML:
++                    operations.insertChild(*ctx.newOpaqueXML({rpc.module().ns(), rpc.module().name(), rpc.name()}, std::nullopt));
++                    break;
++                default:
++                    throw std::logic_error{"Invalid data format for apiResource()"};
++                }
+             }
+         }
+     } else {
+@@ -987,7 +996,8 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+                 case RestconfRequest::Type::YangLibraryVersion:
+                 case RestconfRequest::Type::ListRPC:
+                     res.write_head(200, {contentType(dataFormat.response), CORS});
+-                    res.end(*apiResource(sess.getContext(), restconfRequest.type).printStr(dataFormat.response, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont));
++                    res.end(*apiResource(sess.getContext(), restconfRequest.type, dataFormat.response)
++                                 .printStr(dataFormat.response, libyang::PrintFlags::WithSiblings | libyang::PrintFlags::KeepEmptyCont));
+                     break;
+ 
+                 case RestconfRequest::Type::GetData: {
+diff --git a/tests/restconf-rpc.cpp b/tests/restconf-rpc.cpp
+index c4229a0..d49b121 100644
+--- a/tests/restconf-rpc.cpp
++++ b/tests/restconf-rpc.cpp
+@@ -79,7 +79,9 @@ TEST_CASE("invoking actions and rpcs")
+ 
+     SECTION("List RPCs")
+     {
+-        REQUIRE(get(RESTCONF_OPER_ROOT, {AUTH_ROOT}) == Response{200, jsonHeaders, R"({
++        SECTION("JSON")
++        {
++            REQUIRE(get(RESTCONF_OPER_ROOT, {AUTH_ROOT}) == Response{200, jsonHeaders, R"({
+   "ietf-restconf:restconf": {
+     "operations": {
+       "ietf-factory-default:factory-reset": [null],
+@@ -103,6 +105,35 @@ TEST_CASE("invoking actions and rpcs")
+   }
+ }
+ )"});
++        }
++
++        SECTION("XML")
++        {
++            REQUIRE(get(RESTCONF_OPER_ROOT, {AUTH_ROOT, CONTENT_TYPE_XML})
++                    == Response{200, xmlHeaders,
++                                R"(<restconf xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf">
++  <operations>
++    <factory-reset xmlns="urn:ietf:params:xml:ns:yang:ietf-factory-default"/>
++    <get-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <edit-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <copy-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <delete-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <lock xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <unlock xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <get xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <close-session xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <kill-session xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"/>
++    <set-current-datetime xmlns="urn:ietf:params:xml:ns:yang:ietf-system"/>
++    <system-restart xmlns="urn:ietf:params:xml:ns:yang:ietf-system"/>
++    <system-shutdown xmlns="urn:ietf:params:xml:ns:yang:ietf-system"/>
++    <test-rpc xmlns="http://example.tld/example"/>
++    <test-rpc-no-output xmlns="http://example.tld/example"/>
++    <test-rpc-no-input xmlns="http://example.tld/example"/>
++    <test-rpc-no-input-no-output xmlns="http://example.tld/example"/>
++  </operations>
++</restconf>
++)"});
++        }
+     }
+ 
+     SECTION("RPC")
+-- 
+2.43.0
+

package/rousette/0035-make-sure-that-edit-tree-is-the-first-sibling.patch

@@ -0,0 +1,39 @@
+From 6ad606cb9ad49ca7bfb8056b9695ab271a33e790 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Wed, 26 Mar 2025 18:56:06 +0100
+Subject: [PATCH 35/44] make sure that edit tree is the first sibling
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+After a bug in velia [1], where we passed to Session::editBatch a tree
+which was not the first sibling (and this caused that all the left
+siblings of the node were not considered in the edit), I am making sure
+that we do not lose any data in this project due to this too.
+
+[1] https://github.com/CESNET/velia/commit/2b7187405740fe61e8b37e0efab8c3173d398a26
+
+Fixes: 25f3e3b ("restconf: support for YANG patch")
+Change-Id: I7211168325fbfddd75dc1520c9dd83e31138d3bc
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index 05239e9..c454541 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -600,7 +600,7 @@ void processYangPatchEdit(const std::shared_ptr<RequestContext>& requestCtx, con
+     if (!mergedEdits) {
+         mergedEdits = *singleEdit;
+     } else {
+-        mergedEdits->insertSibling(*singleEdit);
++        mergedEdits = mergedEdits->insertSibling(*singleEdit); // make sure we point to the first sibling, sysrepo::editBatch requires that
+     }
+ }
+ 
+-- 
+2.43.0
+

package/rousette/0037-don-t-create-throwaway-sysrepo-sessions-during-start.patch

@@ -0,0 +1,31 @@
+From 10c6ae778724e5c15a12b58bc95c814cb17b772e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Tue, 8 Apr 2025 16:59:48 +0200
+Subject: [PATCH 37/44] don't create throwaway sysrepo sessions during startup
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: Ic3fc71c08c589a8e87bbdc1aa1b1089c88c7cb1e
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index 9fd3fa9..a840e6e 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -847,7 +847,7 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+              {"ietf-subscribed-notifications", "2019-09-09", {}},
+              {"ietf-restconf-subscribed-notifications", "2019-11-17", {}},
+          }) {
+-        if (auto mod = conn.sessionStart().getContext().getModuleImplemented(module)) {
++        if (auto mod = m_monitoringSession.getContext().getModuleImplemented(module)) {
+             for (const auto& feature : features) {
+                 if (!mod->featureEnabled(feature)) {
+                     throw std::runtime_error("Module "s + module + "@" + version + " does not implement feature " + feature);
+-- 
+2.43.0
+

package/rousette/0038-requests-create-sysrepo-session-later.patch

@@ -0,0 +1,59 @@
+From 4e287e1e2af95c1ec077689e4f353f657469e5e5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Tue, 8 Apr 2025 17:00:44 +0200
+Subject: [PATCH 38/44] requests: create sysrepo session later
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+I was looking at all places where a sysrepo session is used, and tried
+to defer their creations until the last moment possible, just to
+(potentially) save some resources when it isn't needed. Some of these
+changes are cosmetic, but I was touching that code anyway.
+
+This cannot be done for the generic `restconfRoot` handler because of
+its associated error handling which requires a libyang context. Well, it
+*could* be done, but I don't feel like doing some m_monitoringSession
+magic for little to no purpose.
+
+Change-Id: Ia84c90abc1464e4a0f9682779d7471aefad9e2de
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 5 ++---
+ 1 file changed, 2 insertions(+), 3 deletions(-)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index a840e6e..f3c515b 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -902,7 +902,6 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+     });
+ 
+     server->handle(netconfStreamRoot, [this, conn](const auto& req, const auto& res) mutable {
+-        auto sess = conn.sessionStart();
+         std::optional<std::string> xpathFilter;
+         std::optional<sysrepo::NotificationTimeStamp> startTime;
+         std::optional<sysrepo::NotificationTimeStamp> stopTime;
+@@ -914,6 +913,7 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+         }
+ 
+         try {
++            auto sess = conn.sessionStart();
+             authorizeRequest(nacm, sess, req);
+ 
+             auto streamRequest = asRestconfStreamRequest(req.method(), req.uri().path, req.uri().raw_query);
+@@ -962,9 +962,8 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+             return;
+         }
+ 
+-        auto sess = conn.sessionStart(sysrepo::Datastore::Operational);
+-
+         try {
++            auto sess = conn.sessionStart(sysrepo::Datastore::Operational);
+             authorizeRequest(nacm, sess, req);
+ 
+             if (auto mod = asYangModule(sess.getContext(), req.uri().path); mod && hasAccessToYangSchema(sess, *mod)) {
+-- 
+2.43.0
+

package/rousette/0039-docs-doctest-has-moved.patch

@@ -0,0 +1,31 @@
+From 422eae2ae879872bd618e3ba19418d20c197650d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Jan=20Kundr=C3=A1t?= <jan.kundrat@cesnet.cz>
+Date: Wed, 9 Apr 2025 15:52:34 +0200
+Subject: [PATCH 39/44] docs: doctest has moved
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I45d605f080434a0726d729c7b186ab1bbeb8d8e1
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ README.md | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/README.md b/README.md
+index 3fbfd21..646976d 100644
+--- a/README.md
++++ b/README.md
+@@ -94,7 +94,7 @@ In practical terms, this means that the NACM access rules for the following XPat
+ - C++20 compiler (e.g., GCC 10.x+, clang 10+)
+ - CMake 3.19+
+ - optionally systemd - the shared library for logging to `sd-journal`
+-- optionally for built-in tests, [Doctest](https://github.com/onqtam/doctest/) as a C++ unit test framework
++- optionally for built-in tests, [Doctest](https://github.com/doctest/doctest/) as a C++ unit test framework
+ - optionally for built-in tests, [trompeloeil](https://github.com/rollbear/trompeloeil) for mock objects in C++
+ - optionally for built-in tests, [`pam_matrix` and `pam_wrapper`](https://cwrap.org/pam_wrapper.html) for PAM mocking
+ 
+-- 
+2.43.0
+

package/rousette/0040-tests-capture-wrongly-formatted-SSE-messages.patch

@@ -0,0 +1,35 @@
+From b60c30e4eb482ce7b72ba95c8e6edc94f232ca37 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Tue, 8 Apr 2025 18:12:18 +0200
+Subject: [PATCH 40/44] tests: capture wrongly-formatted SSE messages
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Sometimes during development I do things wrong(TM) and the Server Sent
+Events data stream is not prefixed.
+The log failure is unhelpful, so this patch should make the failures
+more clear in such cases.
+
+Change-Id: I0d4643a6d7fe56ea5ce694c734a76b6dd471ff4c
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ tests/restconf_utils.cpp | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/tests/restconf_utils.cpp b/tests/restconf_utils.cpp
+index c3ff1de..72c2c5a 100644
+--- a/tests/restconf_utils.cpp
++++ b/tests/restconf_utils.cpp
+@@ -224,6 +224,7 @@ std::vector<std::string> SSEClient::parseEvents(const std::string& msg)
+             res.emplace_back(std::move(event));
+             event.clear();
+         } else {
++            CAPTURE(msg);
+             FAIL("Unprefixed response");
+         }
+     }
+-- 
+2.43.0
+

package/rousette/0041-tests-perform-factory-reset-between-individual-secti.patch

@@ -0,0 +1,32 @@
+From 2e866f4076df5cf68e7f8015e088baf45b45ddb3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 14 Apr 2025 13:15:29 +0200
+Subject: [PATCH 41/44] tests: perform factory-reset between individual
+ sections of NACM test
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I3b60439a8235e2a0efed58fcdb2ad8eb95f21714
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ tests/restconf-nacm.cpp | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/tests/restconf-nacm.cpp b/tests/restconf-nacm.cpp
+index 51328f3..546d694 100644
+--- a/tests/restconf-nacm.cpp
++++ b/tests/restconf-nacm.cpp
+@@ -20,6 +20,8 @@ TEST_CASE("NACM")
+     auto nacmGuard = manageNacm(srSess);
+     auto server = rousette::restconf::Server{srConn, SERVER_ADDRESS, SERVER_PORT};
+ 
++    srSess.sendRPC(srSess.getContext().newPath("/ietf-factory-default:factory-reset"));
++
+     // something we can read
+     srSess.switchDatastore(sysrepo::Datastore::Operational);
+     srSess.setItem("/ietf-system:system/contact", "contact");
+-- 
+2.43.0
+

package/rousette/0042-restconf-simplify-condition-in-NACM-anonymous-access.patch

@@ -0,0 +1,70 @@
+From 0ef0307d6664affc0547c2e65c8c33900bd7cfc9 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Mon, 14 Apr 2025 15:12:00 +0200
+Subject: [PATCH 42/44] restconf: simplify condition in NACM anonymous access
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+The condition required that all access-operations values are "read". But
+access-operations is a union, so it is enough to check that we have only
+one value in the union and that it is "read".
+
+Also test what happens if anonymous rule access-operation is a union of
+read and something else.
+
+Change-Id: I291243d9e2167601b24d49684d53c361407f66be
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/auth/Nacm.cpp       |  4 +---
+ tests/restconf-nacm.cpp | 18 ++++++++++++++++++
+ 2 files changed, 19 insertions(+), 3 deletions(-)
+
+diff --git a/src/auth/Nacm.cpp b/src/auth/Nacm.cpp
+index 61a7dcc..d0dc4a2 100644
+--- a/src/auth/Nacm.cpp
++++ b/src/auth/Nacm.cpp
+@@ -12,9 +12,7 @@ namespace {
+ bool isRuleReadOnly(const libyang::DataNode& rule)
+ {
+     auto accessOperations = rule.findXPath("access-operations");
+-    return !accessOperations.empty() && std::all_of(accessOperations.begin(), accessOperations.end(), [](const auto& e) {
+-        return e.asTerm().valueStr() == "read";
+-    });
++    return accessOperations.size() == 1 && accessOperations.begin()->asTerm().valueStr() == "read";
+ }
+ 
+ bool isRuleWildcardDeny(const libyang::DataNode& rule)
+diff --git a/tests/restconf-nacm.cpp b/tests/restconf-nacm.cpp
+index 546d694..30f4210 100644
+--- a/tests/restconf-nacm.cpp
++++ b/tests/restconf-nacm.cpp
+@@ -95,6 +95,24 @@ TEST_CASE("NACM")
+             srSess.applyChanges();
+         }
+ 
++        DOCTEST_SUBCASE("Anonymous has one rule with both read and update access operations")
++        {
++            srSess.deleteItem("/ietf-netconf-acm:nacm/rule-list");
++            srSess.applyChanges();
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/group[.='yangnobody']", "");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/module-name", "ietf-system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/action", "permit");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/access-operations", "read update");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/path", "/ietf-system:system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/module-name", "*");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/action", "deny");
++
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/group[.='optics']", "");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/rule[name='1']/module-name", "ietf-system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/rule[name='1']/action", "permit");
++            srSess.applyChanges();
++        }
++
+         DOCTEST_SUBCASE("Anonymous rulelist OK, but not at first place")
+         {
+             srSess.deleteItem("/ietf-netconf-acm:nacm/rule-list");
+-- 
+2.43.0
+

package/rousette/0043-restconf-allow-specifying-exec-permissions-for-anony.patch

@@ -0,0 +1,140 @@
+From f97dcabf8bf74c463d3291d31e9b36fabec0654f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Wed, 9 Apr 2025 21:17:19 +0200
+Subject: [PATCH 43/44] restconf: allow specifying exec permissions for
+ anonymous user access
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+We want to be able to allow anonymous users to call the RPC
+ietf-subscribed-notifications:establish-subscription. Our current NACM
+anonymous setup did not allow specifying exec permissions.
+After this patch admins are allowed to setup a rule in the anonymous
+user rule-list that allows anonymous users to call the
+establish-subscriptions RPC. We allow only this one RPC, specifying any
+other will result in disabling the anonymous user access.
+
+Change-Id: I5aa6fee2bbdabc0b7deac7fb9afecac6c411aca0
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ README.md                |  2 +-
+ src/auth/Nacm.cpp        | 23 ++++++++++++++++++-----
+ tests/restconf-nacm.cpp  | 21 +++++++++++++++++++++
+ tests/restconf_utils.cpp |  4 ++++
+ 4 files changed, 44 insertions(+), 6 deletions(-)
+
+diff --git a/README.md b/README.md
+index 646976d..0796dce 100644
+--- a/README.md
++++ b/README.md
+@@ -66,7 +66,7 @@ When certain conditions are met, the anonymous access will be mapped to a NACM a
+ There must be some specific access rights set up in `ietf-netconf-acm` model (these are currently very opinionated for our use-case):
+ 
+ 1. The first entry of `rule-list` list must be configured for `ANONYMOUS_USER_GROUP`.
+-2. All the rules except the last one in this rule-list entry must enable only "read" access operation.
++2. All the rules except the last one in this rule-list entry must enable either only "read" access operation or only "exec" operation on `ietf-subscribed-notifications:establish-subscription` RPC.
+ 3. The last rule in the first rule-set must be a wildcard rule that disables all operations over all modules.
+ 
+ The anonymous user access is disabled whenever these rules are not met.
+diff --git a/src/auth/Nacm.cpp b/src/auth/Nacm.cpp
+index d0dc4a2..284fa85 100644
+--- a/src/auth/Nacm.cpp
++++ b/src/auth/Nacm.cpp
+@@ -9,10 +9,23 @@
+ #include "NacmIdentities.h"
+ 
+ namespace {
+-bool isRuleReadOnly(const libyang::DataNode& rule)
++bool isWhitelistedRPC(const std::optional<libyang::DataNode>& moduleNameNode, const std::optional<libyang::DataNode>& rpcNameNode)
++{
++    if (!moduleNameNode || !rpcNameNode) {
++        return false;
++    }
++
++    return moduleNameNode->asTerm().valueStr() == "ietf-subscribed-notifications" && rpcNameNode->asTerm().valueStr() == "establish-subscription";
++}
++
++bool isRuleForAnonymousAccess(const libyang::DataNode& rule)
+ {
+     auto accessOperations = rule.findXPath("access-operations");
+-    return accessOperations.size() == 1 && accessOperations.begin()->asTerm().valueStr() == "read";
++    auto rpcName = rule.findPath("rpc-name");
++    return accessOperations.size() == 1 && // Combining access operations is not allowed in anonymous user rules
++        (accessOperations.begin()->asTerm().valueStr() == "read" || // Either read...
++         (accessOperations.begin()->asTerm().valueStr() == "exec" && isWhitelistedRPC(rule.findPath("module-name"), rule.findPath("rpc-name"))) // ...or exec on whitelisted RPC.
++        );
+ }
+ 
+ bool isRuleWildcardDeny(const libyang::DataNode& rule)
+@@ -25,7 +38,7 @@ bool isRuleWildcardDeny(const libyang::DataNode& rule)
+  *
+  * The first rule-list element contains rules for anonymous user access, i.e.:
+  *  - The group is set to @p anonGroup (this one should contain the anonymous user)
+- *  - In rules (except the last one) the access-operation allowed is "read"
++ *  - In rules (except the last one) the access-operation allowed is either "read" or "exec" on a whitelisted RPC.
+  *  - The last rule has module-name="*" and action "deny".
+  *
+  *  @return boolean indicating whether the rules are configured properly for anonymous user access
+@@ -60,8 +73,8 @@ bool validAnonymousNacmRules(sysrepo::Session session, const std::string& anonGr
+         return false;
+     }
+ 
+-    if (!std::all_of(rules.begin(), rules.end() - 1, isRuleReadOnly)) {
+-        spdlog::debug("NACM config validation: First n-1 rules in the anonymous rule-list must be configured for read-access only");
++    if (!std::all_of(rules.begin(), rules.end() - 1, isRuleForAnonymousAccess)) {
++        spdlog::debug("NACM config validation: First n-1 rules in the anonymous rule-list must be configured either for read-access only or exec on listed RPC paths");
+         return false;
+     }
+ 
+diff --git a/tests/restconf-nacm.cpp b/tests/restconf-nacm.cpp
+index 30f4210..7799fe8 100644
+--- a/tests/restconf-nacm.cpp
++++ b/tests/restconf-nacm.cpp
+@@ -113,6 +113,27 @@ TEST_CASE("NACM")
+             srSess.applyChanges();
+         }
+ 
++        DOCTEST_SUBCASE("This RPC is not allowed")
++        {
++            srSess.deleteItem("/ietf-netconf-acm:nacm/rule-list");
++            srSess.applyChanges();
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/group[.='yangnobody']", "");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/module-name", "ietf-system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/action", "permit");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/access-operations", "read");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='1']/path", "/ietf-system:system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/module-name", "ietf-subscribed-notifications");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/action", "permit");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/access-operations", "read update");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='2']/rpc-name", "/ietf-subscribed-notifications:modify-subscription");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='3']/module-name", "*");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='3']/action", "deny");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/group[.='optics']", "");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/rule[name='1']/module-name", "ietf-system");
++            srSess.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/rule[name='1']/action", "permit");
++            srSess.applyChanges();
++        }
++
+         DOCTEST_SUBCASE("Anonymous rulelist OK, but not at first place")
+         {
+             srSess.deleteItem("/ietf-netconf-acm:nacm/rule-list");
+diff --git a/tests/restconf_utils.cpp b/tests/restconf_utils.cpp
+index 72c2c5a..a137463 100644
+--- a/tests/restconf_utils.cpp
++++ b/tests/restconf_utils.cpp
+@@ -152,6 +152,10 @@ void setupRealNacm(sysrepo::Session session)
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='15']/action", "permit");
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='15']/access-operations", "read");
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='15']/path", "/example-delete:immutable");
++    session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='16']/module-name", "ietf-subscribed-notifications");
++    session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='16']/action", "permit");
++    session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='16']/access-operations", "exec");
++    session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='16']/rpc-name", "establish-subscription");
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='99']/module-name", "*");
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='anon rule']/rule[name='99']/action", "deny");
+     session.setItem("/ietf-netconf-acm:nacm/rule-list[name='dwdm rule']/group[.='optics']", "");
+-- 
+2.43.0
+

package/rousette/0044-restconf-add-access-log-to-stream-root.patch

@@ -0,0 +1,32 @@
+From 438a18f5884ace3063f00a2dfc53dd2b4034f53e Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Tom=C3=A1=C5=A1=20Pecka?= <tomas.pecka@cesnet.cz>
+Date: Wed, 16 Apr 2025 10:56:50 +0200
+Subject: [PATCH 44/44] restconf: add access log to stream root
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Change-Id: I5e1db3f40bc6a7f294e6a5fef9402e0855055258
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/restconf/Server.cpp | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/restconf/Server.cpp b/src/restconf/Server.cpp
+index f3c515b..5b1b2f9 100644
+--- a/src/restconf/Server.cpp
++++ b/src/restconf/Server.cpp
+@@ -902,6 +902,9 @@ Server::Server(sysrepo::Connection conn, const std::string& address, const std::
+     });
+ 
+     server->handle(netconfStreamRoot, [this, conn](const auto& req, const auto& res) mutable {
++        const auto& peer = http::peer_from_request(req);
++        spdlog::info("{}: {} {}", peer, req.method(), req.uri().raw_path);
++
+         std::optional<std::string> xpathFilter;
+         std::optional<sysrepo::NotificationTimeStamp> startTime;
+         std::optional<sysrepo::NotificationTimeStamp> stopTime;
+-- 
+2.43.0
+