mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-22 01:13:00 +02:00
Merge pull request #1053 from kernelkit/rpi4
Add support for Raspberry Pi 4B
This commit is contained in:
Mattias Walström
@@ -93,12 +93,14 @@ The [following boards](board/aarch64/README.md) are fully supported:
|
||||
- Marvell CN9130 CRB
|
||||
- Marvell EspressoBIN
|
||||
- Microchip SparX-5i PCB135 (eMMC)
|
||||
- StarFive VisionFive2
|
||||
- Raspberry Pi 4B
|
||||
- NanoPi R2S
|
||||
|
||||
An x86_64 build is also available, primarily intended for development
|
||||
and testing, but can also be used for evaluation and demo purposes. For
|
||||
more information, see: [Infix in Virtual Environments](doc/virtual.md).
|
||||
Additionally, StarFive VisionFive2, a RISC-V based two-port router, and
|
||||
an x86_64 build is also available. The latter is primarily intended for
|
||||
development and testing, but can also be used for evaluation and demo
|
||||
purposes. For more information, see: [Infix in Virtual
|
||||
Environments](doc/virtual.md).
|
||||
|
||||
> See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
|
||||
> page for our pre-built images. The *[Latest Build][]* has bleeding
|
||||
|
||||
@@ -0,0 +1,14 @@
|
||||
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts 2025-04-28 00:13:06.880003668 +0200
|
||||
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts 2025-04-28 00:14:17.708941263 +0200
|
||||
@@ -14,6 +14,11 @@
|
||||
chosen {
|
||||
/* 8250 auxiliary UART instead of pl011 */
|
||||
stdout-path = "serial1:115200n8";
|
||||
+
|
||||
+ infix {
|
||||
+ /* Default admin user password: 'admin' */
|
||||
+ factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
|
||||
+ };
|
||||
};
|
||||
|
||||
cam1_reg: regulator-cam1 {
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1 @@
|
||||
root=/dev/mmcblk0p2 rootwait console=tty1 console=ttyAMA0,115200
|
||||
@@ -0,0 +1,41 @@
|
||||
# Please note that this is only a sample, we recommend you to change it to fit
|
||||
# your needs.
|
||||
# You should override this file using BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE.
|
||||
# See http://buildroot.org/manual.html#rootfs-custom
|
||||
# and http://elinux.org/RPiconfig for a description of config.txt syntax
|
||||
|
||||
start_file=start4.elf
|
||||
fixup_file=fixup4.dat
|
||||
|
||||
kernel=u-boot.bin
|
||||
|
||||
device_tree=bcm2711-rpi-4-b.dtb
|
||||
dtoverlay=rpi-env
|
||||
dtoverlay=infix-key
|
||||
|
||||
# To use an external initramfs file
|
||||
#initramfs rootfs.cpio.gz
|
||||
|
||||
# Disable overscan assuming the display supports displaying the full resolution
|
||||
# If the text shown on the screen disappears off the edge, comment this out
|
||||
disable_overscan=1
|
||||
|
||||
# How much memory in MB to assign to the GPU on Pi models having
|
||||
# 256, 512 or 1024 MB total memory
|
||||
gpu_mem_256=100
|
||||
gpu_mem_512=100
|
||||
gpu_mem_1024=100
|
||||
|
||||
# Enable UART0 for serial console on ttyAMA0
|
||||
enable_uart=1
|
||||
force_turbo=1
|
||||
#dtoverlay=miniuart-bt
|
||||
|
||||
# Run as fast as firmware / board allows
|
||||
arm_boost=1
|
||||
|
||||
# enable 64bits support
|
||||
arm_64bit=1
|
||||
|
||||
# Enable early debugging info
|
||||
uart_2ndstage=1
|
||||
@@ -0,0 +1,71 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
#BOOT_FILES#
|
||||
}
|
||||
}
|
||||
|
||||
size = 32M
|
||||
}
|
||||
|
||||
image cfg.ext4 {
|
||||
empty = true
|
||||
temporary = true
|
||||
size = 16M
|
||||
|
||||
ext4 {
|
||||
label = "cfg"
|
||||
}
|
||||
}
|
||||
|
||||
image var.ext4 {
|
||||
empty = true
|
||||
temporary = true
|
||||
size = 512M
|
||||
|
||||
ext4 {
|
||||
label = "var"
|
||||
use-mke2fs = true
|
||||
}
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
partition-table-type = "gpt"
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type-uuid = EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition aux {
|
||||
partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
|
||||
image = "aux.ext4"
|
||||
}
|
||||
|
||||
partition primary {
|
||||
partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
|
||||
bootable = true
|
||||
size = 200M
|
||||
image = "rootfs.squashfs"
|
||||
}
|
||||
|
||||
partition secondary {
|
||||
partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
|
||||
bootable = true
|
||||
size = 200M
|
||||
image = "rootfs.squashfs"
|
||||
}
|
||||
|
||||
partition cfg {
|
||||
partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
|
||||
image = "cfg.ext4"
|
||||
}
|
||||
|
||||
partition var {
|
||||
partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
|
||||
image = "var.ext4"
|
||||
}
|
||||
}
|
||||
Executable
+7
@@ -0,0 +1,7 @@
|
||||
#!/bin/sh
|
||||
|
||||
# Armbian firmware installs to /lib/firmware but driver wants the
|
||||
# file(s) in /lib/firmware/brcm/
|
||||
if [ -f "${TARGET_DIR}/lib/firmware/BCM4345C0.hcd" ]; then
|
||||
mv "${TARGET_DIR}/lib/firmware/BCM4345C0.hcd" "${TARGET_DIR}/lib/firmware/brcm/"
|
||||
fi
|
||||
Executable
+43
@@ -0,0 +1,43 @@
|
||||
#!/bin/sh
|
||||
set -e
|
||||
|
||||
BOARD_DIR=$(dirname "$0")
|
||||
GENIMAGE_CFG="${BUILD_DIR}/genimage.cfg"
|
||||
GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
|
||||
|
||||
# Device trees are installed for distro boot (syslinux.conf), but on RPi
|
||||
# we need them for the SPL, which feeds the TPL (U-Boot) for use instead
|
||||
# of the (built-in) control DT other platforms use.
|
||||
find "${TARGET_DIR}/boot" -type f -name '*.dtb' -exec cp '{}' "${BINARIES_DIR}/" \;
|
||||
|
||||
# We've asked U-Boot previously to build overlays for us: Infix signing
|
||||
# key and our ixboot scripts. Make sure here they are installed in the
|
||||
# proper directory so genimage can create the DOS partition the SPL
|
||||
# reads config.txt from.
|
||||
find "${BINARIES_DIR}" -type f -name '*.dtbo' -exec mv '{}' "${BINARIES_DIR}/rpi-firmware/overlays/" \;
|
||||
|
||||
# Create FILES array for the genimage.cfg generation
|
||||
FILES=""
|
||||
for f in "${BINARIES_DIR}"/*.dtb "${BINARIES_DIR}"/rpi-firmware/*; do
|
||||
case "$f" in
|
||||
*~|*.bak) continue ;;
|
||||
esac
|
||||
FILES="${FILES}\t\t\t\"${f#"${BINARIES_DIR}/"}\",\n"
|
||||
done
|
||||
|
||||
KERNEL=$(sed -n 's/^kernel=//p' "${BINARIES_DIR}/rpi-firmware/config.txt")
|
||||
FILES="${FILES}\t\t\t\"${KERNEL}\""
|
||||
|
||||
sed "s|#BOOT_FILES#|${FILES}|" "${BOARD_DIR}/genimage.cfg.in" > "${GENIMAGE_CFG}"
|
||||
|
||||
ROOTPATH_TMP=$(mktemp -d)
|
||||
trap 'rm -rf \"$ROOTPATH_TMP\"' EXIT
|
||||
|
||||
rm -rf "${GENIMAGE_TMP}"
|
||||
|
||||
genimage \
|
||||
--rootpath "${ROOTPATH_TMP}" \
|
||||
--tmppath "${GENIMAGE_TMP}" \
|
||||
--inputpath "${BINARIES_DIR}" \
|
||||
--outputpath "${BINARIES_DIR}" \
|
||||
--config "${GENIMAGE_CFG}"
|
||||
@@ -0,0 +1,16 @@
|
||||
default rpi4b
|
||||
menu title Boot Menu
|
||||
prompt 1
|
||||
timeout 30
|
||||
|
||||
label rpi4b
|
||||
menu label Infix on Raspberry Pi 4B
|
||||
kernel /boot/Image
|
||||
devicetree /boot/broadcom/bcm2711-rpi-4-b.dtb
|
||||
append ${bootargs_root} 8250.nr_uarts=1 console=ttyS0,115200 ${bootargs_log} -- ${bootargs_user}
|
||||
|
||||
label rpi400
|
||||
menu label Infix on Raspberry Pi 400
|
||||
kernel /boot/Image
|
||||
devicetree /boot/broadcom/bcm2711-rpi-400.dtb
|
||||
append ${bootargs_root} 8250.nr_uarts=1 console=ttyS0,115200 ${bootargs_log} -- ${bootargs_user}
|
||||
@@ -0,0 +1,193 @@
|
||||
{
|
||||
"ieee802-dot1ab-lldp:lldp": {
|
||||
"infix-lldp:enabled": true
|
||||
},
|
||||
"ietf-interfaces:interfaces": {
|
||||
"interface": [
|
||||
{
|
||||
"name": "lo",
|
||||
"type": "infix-if-type:loopback",
|
||||
"ietf-ip:ipv4": {
|
||||
"address": [
|
||||
{
|
||||
"ip": "127.0.0.1",
|
||||
"prefix-length": 8
|
||||
}
|
||||
]
|
||||
},
|
||||
"ietf-ip:ipv6": {
|
||||
"address": [
|
||||
{
|
||||
"ip": "::1",
|
||||
"prefix-length": 128
|
||||
}
|
||||
]
|
||||
}
|
||||
},
|
||||
{
|
||||
"name": "eth0",
|
||||
"type": "infix-if-type:ethernet"
|
||||
}
|
||||
]
|
||||
},
|
||||
"ietf-keystore:keystore": {
|
||||
"asymmetric-keys": {
|
||||
"asymmetric-key": [
|
||||
{
|
||||
"name": "genkey",
|
||||
"public-key-format": "ietf-crypto-types:ssh-public-key-format",
|
||||
"public-key": "",
|
||||
"private-key-format": "ietf-crypto-types:rsa-private-key-format",
|
||||
"cleartext-private-key": "",
|
||||
"certificates": {}
|
||||
}
|
||||
]
|
||||
}
|
||||
},
|
||||
"ietf-netconf-acm:nacm": {
|
||||
"enable-nacm": true,
|
||||
"groups": {
|
||||
"group": [
|
||||
{
|
||||
"name": "admin",
|
||||
"user-name": [
|
||||
"admin"
|
||||
]
|
||||
}
|
||||
]
|
||||
},
|
||||
"rule-list": [
|
||||
{
|
||||
"name": "admin-acl",
|
||||
"group": [
|
||||
"admin"
|
||||
],
|
||||
"rule": [
|
||||
{
|
||||
"name": "permit-all",
|
||||
"module-name": "*",
|
||||
"access-operations": "*",
|
||||
"action": "permit",
|
||||
"comment": "Allow 'admin' group complete access to all operations and data."
|
||||
}
|
||||
]
|
||||
},
|
||||
{
|
||||
"name": "default-deny-all",
|
||||
"group": [
|
||||
"*"
|
||||
],
|
||||
"rule": [
|
||||
{
|
||||
"name": "deny-password-read",
|
||||
"module-name": "ietf-system",
|
||||
"path": "/ietf-system:system/authentication/user/password",
|
||||
"access-operations": "*",
|
||||
"action": "deny"
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
},
|
||||
"ietf-netconf-server:netconf-server": {
|
||||
"listen": {
|
||||
"endpoints": {
|
||||
"endpoint": [
|
||||
{
|
||||
"name": "default-ssh",
|
||||
"ssh": {
|
||||
"tcp-server-parameters": {
|
||||
"local-address": "::"
|
||||
},
|
||||
"ssh-server-parameters": {
|
||||
"server-identity": {
|
||||
"host-key": [
|
||||
{
|
||||
"name": "default-key",
|
||||
"public-key": {
|
||||
"central-keystore-reference": "genkey"
|
||||
}
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
},
|
||||
"ietf-system:system": {
|
||||
"hostname": "rpi4",
|
||||
"ntp": {
|
||||
"enabled": true,
|
||||
"server": [
|
||||
{
|
||||
"name": "ntp.org",
|
||||
"udp": {
|
||||
"address": "pool.ntp.org"
|
||||
},
|
||||
"iburst": true
|
||||
}
|
||||
]
|
||||
},
|
||||
"authentication": {
|
||||
"user": [
|
||||
{
|
||||
"name": "admin",
|
||||
"password": "$factory$",
|
||||
"infix-system:shell": "bash"
|
||||
}
|
||||
]
|
||||
},
|
||||
"infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCAtLSBhIE5ldHdvcmsgT3BlcmF0aW5nIFN5c3RlbQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQuZ2l0aHViLmlvCictJy0tLSctJwo="
|
||||
},
|
||||
"infix-dhcp-client:dhcp-client": {
|
||||
"client-if": [
|
||||
{
|
||||
"if-name": "eth0",
|
||||
"option": [
|
||||
{
|
||||
"id": "netmask"
|
||||
},
|
||||
{
|
||||
"id": "broadcast"
|
||||
},
|
||||
{
|
||||
"id": "router"
|
||||
},
|
||||
{
|
||||
"id": "domain"
|
||||
},
|
||||
{
|
||||
"id": "hostname"
|
||||
},
|
||||
{
|
||||
"id": "dns-server"
|
||||
},
|
||||
{
|
||||
"id": "ntp-server"
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
},
|
||||
"infix-meta:meta": {
|
||||
"infix-meta:version": "1.2"
|
||||
},
|
||||
"infix-services:mdns": {
|
||||
"enabled": true
|
||||
},
|
||||
"infix-services:web": {
|
||||
"enabled": true,
|
||||
"console": {
|
||||
"enabled": true
|
||||
},
|
||||
"netbrowse": {
|
||||
"enabled": true
|
||||
},
|
||||
"restconf": {
|
||||
"enabled": true
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,5 @@
|
||||
{
|
||||
"eth0": {
|
||||
"phy-detached-when-down": true
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,6 @@
|
||||
# Broadcom BCM2835 Watchdog timer
|
||||
device /dev/watchdog0 {
|
||||
timeout = 60
|
||||
interval = 5
|
||||
safe-exit = true
|
||||
}
|
||||
@@ -0,0 +1,3 @@
|
||||
# CONFIG_MMC_PCI is not set
|
||||
CONFIG_OF_OVERLAY_LIST="rpi-env infix-key"
|
||||
# CONFIG_ENV_IS_IN_FAT is not set
|
||||
@@ -0,0 +1,27 @@
|
||||
/dts-v1/;
|
||||
/plugin/;
|
||||
|
||||
&{/} {
|
||||
config {
|
||||
environment {
|
||||
vendor = "infix";
|
||||
preboot = "run ixpreboot";
|
||||
ixbootdelay = "0.5";
|
||||
bootdelay = "-2";
|
||||
bootmenu_delay = "10";
|
||||
boot_targets = "mmc1";
|
||||
ethprime = "eth0";
|
||||
bootcmd = "run ixboot";
|
||||
|
||||
ixpreboot = /incbin/("scripts/ixpreboot.sh");
|
||||
ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
|
||||
ixbtn-factory = "echo \"No button available, use bootmenu\"";
|
||||
ixfactory = /incbin/("scripts/ixfactory.sh");
|
||||
|
||||
ixboot = /incbin/("scripts/ixboot.sh");
|
||||
ixbootslot = /incbin/("scripts/ixbootslot.sh");
|
||||
ixprepblk = /incbin/("scripts/ixprepblk.sh");
|
||||
ixprepdhcp = /incbin/("scripts/ixprepdhcp.sh");
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -17,14 +17,23 @@ endef
|
||||
# U-Boot build tree. This will then be built in to the final U-Boot
|
||||
# image's control DT via the CONFIG_DEVICE_TREE_INCLUDES option (see
|
||||
# extras.config).
|
||||
#
|
||||
# Some platforms, most notably Raspberry Pi, load the device tree
|
||||
# from the SPL, effectively overriding the built-in control DT.
|
||||
# For that we bundle an overlay that can be included instead.
|
||||
define UBOOT_PRE_BUILD_INSTALL_KEY
|
||||
$(HOST_DIR)/bin/dtc <(echo '/dts-v1/; / { signature {}; };') >$(@D)/infix-key.dtb
|
||||
$(HOST_DIR)/bin/dtc -a 1024 <(echo '/dts-v1/; / { signature {}; };') \
|
||||
>$(@D)/infix-key.dtb
|
||||
$(foreach key, \
|
||||
$(call qstrip,$(TRUSTED_KEYS_DEVELOPMENT_PATH)) $(call qstrip,$(TRUSTED_KEYS_EXTRA_PATH)),\
|
||||
$(call uboot-add-pubkey,$(key),$(@D)/infix-key.dtb))
|
||||
$(HOST_DIR)/bin/dtc -I dtb -O dts \
|
||||
<$(@D)/infix-key.dtb \
|
||||
| sed -e 's:/dts-v[0-9]\+/;::' >$(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtsi
|
||||
| sed -e 's:/dts-v[0-9]\+/;::' \
|
||||
| tee $(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtsi \
|
||||
| sed -e '1i\/dts-v1/;\n/plugin/;\n' -e '/^$$/d' -e 's:/ {:\&{/} {:' \
|
||||
>$(@D)/arch/$(UBOOT_ARCH)/dts/infix-key.dtso
|
||||
|
||||
rm $(@D)/infix-key.dtb
|
||||
endef
|
||||
UBOOT_PRE_BUILD_HOOKS += UBOOT_PRE_BUILD_INSTALL_KEY
|
||||
|
||||
@@ -0,0 +1,201 @@
|
||||
BR2_aarch64=y
|
||||
BR2_cortex_a72=y
|
||||
BR2_ARM_FPU_VFPV4=y
|
||||
BR2_TOOLCHAIN_EXTERNAL=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
|
||||
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
|
||||
BR2_DL_DIR="${BR2_EXTERNAL_INFIX_PATH}/dl"
|
||||
BR2_CCACHE=y
|
||||
BR2_CCACHE_DIR="${BR2_EXTERNAL_INFIX_PATH}/.ccache"
|
||||
BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches ${BR2_EXTERNAL_INFIX_PATH}/patches"
|
||||
BR2_DOWNLOAD_FORCE_CHECK_HASHES=y
|
||||
BR2_TARGET_GENERIC_HOSTNAME="infix"
|
||||
BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
|
||||
BR2_INIT_FINIT=y
|
||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
||||
BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
|
||||
BR2_ROOTFS_MERGED_USR=y
|
||||
# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
|
||||
BR2_SYSTEM_BIN_SH_BASH=y
|
||||
BR2_TARGET_GENERIC_GETTY_PORT="@console"
|
||||
BR2_TARGET_GENERIC_GETTY_TERM="xterm"
|
||||
BR2_SYSTEM_DHCP="eth0"
|
||||
BR2_SYSTEM_DEFAULT_PATH="/bin:/sbin:/usr/bin:/usr/sbin"
|
||||
BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA C.UTF-8"
|
||||
BR2_GENERATE_LOCALE="en_US en_CA C.UTF-8"
|
||||
BR2_TARGET_TZ_INFO=y
|
||||
BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/rootfs"
|
||||
BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/post-build.sh"
|
||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/post-image.sh"
|
||||
BR2_LINUX_KERNEL=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.30"
|
||||
BR2_LINUX_KERNEL_PATCH="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/bcm2711-rpi-4-b-dts.patch"
|
||||
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
|
||||
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/bcm2711_defconfig"
|
||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2711-rpi-4-b broadcom/bcm2711-rpi-400"
|
||||
BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
|
||||
BR2_LINUX_KERNEL_INSTALL_TARGET=y
|
||||
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
|
||||
BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL_INFIX_PATH)/board/common/busybox_defconfig"
|
||||
BR2_PACKAGE_XZ=y
|
||||
BR2_PACKAGE_STRACE=y
|
||||
BR2_PACKAGE_STRESS_NG=y
|
||||
BR2_PACKAGE_JQ=y
|
||||
BR2_PACKAGE_E2FSPROGS=y
|
||||
BR2_PACKAGE_ARMBIAN_FIRMWARE=y
|
||||
BR2_PACKAGE_ARMBIAN_FIRMWARE_AP6255=y
|
||||
BR2_PACKAGE_BRCMFMAC_SDIO_FIRMWARE_RPI=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM4366B1=y
|
||||
BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM4366C0=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4_X=y
|
||||
BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/config.txt"
|
||||
BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rpi/cmdline.txt"
|
||||
BR2_PACKAGE_DBUS_CXX=y
|
||||
BR2_PACKAGE_DBUS_GLIB=y
|
||||
BR2_PACKAGE_DBUS_TRIGGERD=y
|
||||
BR2_PACKAGE_EUDEV_RULES_GEN=y
|
||||
# BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
|
||||
BR2_PACKAGE_EVEMU=y
|
||||
BR2_PACKAGE_EVTEST=y
|
||||
BR2_PACKAGE_GPTFDISK=y
|
||||
BR2_PACKAGE_GPTFDISK_SGDISK=y
|
||||
BR2_PACKAGE_INPUT_EVENT_DAEMON=y
|
||||
BR2_PACKAGE_MDIO_TOOLS=y
|
||||
BR2_PACKAGE_RNG_TOOLS=y
|
||||
BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
|
||||
BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
|
||||
BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
|
||||
BR2_PACKAGE_UBOOT_TOOLS_MKENVIMAGE=y
|
||||
BR2_PACKAGE_PYTHON3=y
|
||||
BR2_PACKAGE_PYTHON_GUNICORN=y
|
||||
BR2_PACKAGE_LIBSSH_OPENSSL=y
|
||||
BR2_PACKAGE_LIBSSH2=y
|
||||
BR2_PACKAGE_LIBSSH2_OPENSSL=y
|
||||
BR2_PACKAGE_LIBOPENSSL_BIN=y
|
||||
BR2_PACKAGE_LIBINPUT=y
|
||||
BR2_PACKAGE_LIBCURL_CURL=y
|
||||
BR2_PACKAGE_NETOPEER2_CLI=y
|
||||
BR2_PACKAGE_NSS_MDNS=y
|
||||
BR2_PACKAGE_LINUX_PAM=y
|
||||
BR2_PACKAGE_LIBPAM_RADIUS_AUTH=y
|
||||
BR2_PACKAGE_ONIGURUMA=y
|
||||
BR2_PACKAGE_AVAHI_DAEMON=y
|
||||
BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
|
||||
BR2_PACKAGE_CHRONY=y
|
||||
BR2_PACKAGE_CONNTRACK_TOOLS=y
|
||||
BR2_PACKAGE_DNSMASQ=y
|
||||
BR2_PACKAGE_ETHTOOL=y
|
||||
BR2_PACKAGE_FPING=y
|
||||
BR2_PACKAGE_FRR=y
|
||||
BR2_PACKAGE_HOSTAPD=y
|
||||
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
|
||||
BR2_PACKAGE_IPROUTE2=y
|
||||
BR2_PACKAGE_IPTABLES_NFTABLES=y
|
||||
BR2_PACKAGE_IPUTILS=y
|
||||
BR2_PACKAGE_IW=y
|
||||
BR2_PACKAGE_LLDPD=y
|
||||
BR2_PACKAGE_MSTPD=y
|
||||
BR2_PACKAGE_NETCALC=y
|
||||
BR2_PACKAGE_NETCAT_OPENBSD=y
|
||||
BR2_PACKAGE_NETSNMP=y
|
||||
BR2_PACKAGE_NFTABLES=y
|
||||
BR2_PACKAGE_NGINX=y
|
||||
BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
|
||||
BR2_PACKAGE_NGINX_HTTP_V2_MODULE=y
|
||||
BR2_PACKAGE_NMAP=y
|
||||
BR2_PACKAGE_NMAP_NCAT=y
|
||||
BR2_PACKAGE_NMAP_NMAP=y
|
||||
BR2_PACKAGE_NMAP_NPING=y
|
||||
BR2_PACKAGE_OPENRESOLV=y
|
||||
BR2_PACKAGE_OPENSSH=y
|
||||
BR2_PACKAGE_SOCAT=y
|
||||
BR2_PACKAGE_TCPDUMP=y
|
||||
BR2_PACKAGE_TRACEROUTE=y
|
||||
BR2_PACKAGE_ULOGD=y
|
||||
BR2_PACKAGE_WHOIS=y
|
||||
BR2_PACKAGE_WIRELESS_REGDB=y
|
||||
BR2_PACKAGE_WIRELESS_TOOLS=y
|
||||
BR2_PACKAGE_WPA_SUPPLICANT=y
|
||||
BR2_PACKAGE_BASH_COMPLETION=y
|
||||
BR2_PACKAGE_SUDO=y
|
||||
BR2_PACKAGE_TTYD=y
|
||||
BR2_PACKAGE_GETENT=y
|
||||
BR2_PACKAGE_HTOP=y
|
||||
BR2_PACKAGE_IRQBALANCE=y
|
||||
BR2_PACKAGE_KMOD_TOOLS=y
|
||||
BR2_PACKAGE_PWGEN=y
|
||||
BR2_PACKAGE_RAUC=y
|
||||
BR2_PACKAGE_RAUC_DBUS=y
|
||||
BR2_PACKAGE_RAUC_GPT=y
|
||||
BR2_PACKAGE_RAUC_NETWORK=y
|
||||
BR2_PACKAGE_RAUC_JSON=y
|
||||
BR2_PACKAGE_SYSKLOGD=y
|
||||
BR2_PACKAGE_SYSKLOGD_LOGGER=y
|
||||
BR2_PACKAGE_WATCHDOGD=y
|
||||
BR2_PACKAGE_LESS=y
|
||||
BR2_PACKAGE_MG=y
|
||||
BR2_PACKAGE_NANO=y
|
||||
BR2_TARGET_ROOTFS_SQUASHFS=y
|
||||
# BR2_TARGET_ROOTFS_TAR is not set
|
||||
BR2_TARGET_UBOOT=y
|
||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rpi_arm64"
|
||||
BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="$(BR2_EXTERNAL_INFIX_PATH)/board/common/uboot/extras.config $(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/rpi/uboot/extras.config"
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
|
||||
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="arch/arm/dts/infix-key.dtbo arch/arm/dts/rpi-env.dtbo"
|
||||
BR2_TARGET_UBOOT_CUSTOM_DTS_PATH="$(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/rpi/uboot/rpi-env.dtso"
|
||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
||||
BR2_PACKAGE_HOST_E2FSPROGS=y
|
||||
BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
|
||||
BR2_PACKAGE_HOST_GENEXT2FS=y
|
||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
||||
BR2_PACKAGE_HOST_KMOD_XZ=y
|
||||
BR2_PACKAGE_HOST_MTOOLS=y
|
||||
BR2_PACKAGE_HOST_RAUC=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
|
||||
BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
|
||||
INFIX_VENDOR_HOME="https://github.com/kernelkit"
|
||||
INFIX_IMAGE_ID="${INFIX_ID}-rpi4"
|
||||
INFIX_DESC="Infix is a Network Operating System based on Linux. It can be set up both as a switch, with offloading using switchdev, and a router with firewalling."
|
||||
INFIX_HOME="https://github.com/kernelkit/infix/"
|
||||
INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
|
||||
INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
|
||||
BR2_PACKAGE_CONFD=y
|
||||
BR2_PACKAGE_GENCERT=y
|
||||
BR2_PACKAGE_STATD=y
|
||||
BR2_PACKAGE_FACTORY=y
|
||||
BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
|
||||
BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
|
||||
BR2_PACKAGE_FINIT_PLUGIN_MODULES_LOAD=y
|
||||
BR2_PACKAGE_FINIT_PLUGIN_RTC=y
|
||||
BR2_PACKAGE_FINIT_RTC_DATE="2024-11-04 10:54:00"
|
||||
BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
|
||||
BR2_PACKAGE_FINIT_PLUGIN_TTY=y
|
||||
BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
|
||||
BR2_PACKAGE_IITO=y
|
||||
BR2_PACKAGE_KEYACK=y
|
||||
BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
|
||||
BR2_PACKAGE_LANDING=y
|
||||
BR2_PACKAGE_LOWDOWN=y
|
||||
BR2_PACKAGE_MCD=y
|
||||
BR2_PACKAGE_MDNS_ALIAS=y
|
||||
BR2_PACKAGE_NETBROWSE=y
|
||||
BR2_PACKAGE_PODMAN=y
|
||||
BR2_PACKAGE_PODMAN_DRIVER_BTRFS=y
|
||||
BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
|
||||
BR2_PACKAGE_PODMAN_DRIVER_VFS=y
|
||||
BR2_PACKAGE_SHOW=y
|
||||
BR2_PACKAGE_TETRIS=y
|
||||
BR2_PACKAGE_ROUSETTE=y
|
||||
BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
|
||||
BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
|
||||
TRUSTED_KEYS=y
|
||||
TRUSTED_KEYS_DEVELOPMENT=y
|
||||
SDCARD_AUX=y
|
||||
@@ -5,12 +5,14 @@ All notable changes to the project are documented in this file.
|
||||
|
||||
[v25.05.0][UNRELEASED]
|
||||
-------------------------
|
||||
|
||||
### Changes
|
||||
- Upgrade Buildroot to 2025.02.3 (LTS)
|
||||
- Upgrade Linux kernel to 6.12.30 (LTS)
|
||||
- Upgrade libyang to 3.12.2
|
||||
- Upgrade sysrepo to 3.6.11
|
||||
- Upgrade netopeer2 (NETCONF) to 2.4.1
|
||||
- New hardware support: Raspberry Pi 4B (aarch64)
|
||||
- Add documentation on Infix upgrading and downgrading, issue #1009
|
||||
- Add HDMI and USB support for iMX8MP-evk
|
||||
- Enforced strict format for LLDP destination MAC address:
|
||||
|
||||
@@ -104,7 +104,7 @@ module infix-dhcp-client {
|
||||
|
||||
The default is an empty list, meaning all supported options. To
|
||||
restrict the client to only get IP address and default route, set
|
||||
this to: 'subnet router'";
|
||||
this to: 'netmask router'";
|
||||
|
||||
must "not(id = 'fqdn' and 'value/hex')" {
|
||||
error-message "FQDN option must use string format";
|
||||
|
||||
Reference in New Issue
Block a user