mech: Play around with a native yang model

.github/CHECKLIST.md

@@ -1,41 +0,0 @@
-Checklists for Pull Requests and Releases
-=========================================
-
-Maintainer checklists for reviewing pull requests and doing releases.
-
-Pull Requests
--------------
-
-- If applicable, is there a readable ChangeLog entry?
-- If any LICENSE file has been updated, has the `.hash` file been updated?
-- If any change to a Finit `.svc` file, does any run/task linger?  
-  I.e., is there a runlevel and/or condition defined to prevent them
-  from running outside of their intended runlevel?
-- If any change to grub or qemu/qeneth setup, has it been tested in GNS3?
-  - If any change to u-boot/buildroot, has it been tested with `<booloader>_defconfig`
-- If any change to logging, have the resulting logs been audited?
-  - Check for duplicate entries, misspellings
-  - Check for sneaky severity changes, e.g., error vs note, error vs warning
-- If new subsystem, or major changes to a subsystem, have the docs been updated?
-- If change to mDNS, has it been tested with netbrowse?
-- If change to `_defconfig`, verify `local.mk` and sync with other archs
-  - Test manually as well, e.g., CLI changes do not have ha regression tests
-  - Build from distclean, or use artifacts built by build servers, for manual tests
-
-Releases
---------
-
-Recommended checkpoints, use at your own discretion:
-
-- Make at least one -betaN release to verify the GitHub workflow well in time release day
-  - Stuff happens, remember kernelkit/infix#735
-- Make at least one -rcN to flush out any issues in customer repos
-  - Easy to forget adaptations/hacks in customer repos -- may need Infix change/support
-- Verify release artifacts (checksums, completeness, no corrupted files)
-- Test on actual hardware for at least one architecture
-- Review ChangeLog for completeness
-- Check for release-blocking issues
-- Verify generated GNS3 appliance, no marketplace update on -rc builds
-- Ensure the markdown link for the release diff is updated
-- Ensure subrepos are tagged (can be automated, see kernelkit/infix#393)
-- Sync tags for all repo. sync activities

.github/CONTRIBUTING.md

@@ -1,279 +1,78 @@
-Contributing Guidelines
-=======================
+Contributing to Infix
+=====================
 
-Thank :heart: you for taking the time to read this!
+We welcome any and all help in the form of bug reports, fixes, patches
+to add new features -- *preferably as GitHub pull requests*.  Other
+methods are of course also possible: emailing the [maintainers][] a
+patch or even a raw file, a feature request or an alert of a problem.
 
-We welcome any help in the form of bug reports, fixes, or patches to add
-new features.  We *prefer* GitHub pull requests, but are open to other
-forms of collaboration as well.  [Let's talk!][support] :handshake:
+If you are unsure of what to do, or how to implement an idea or bugfix,
+open an issue with `"[RFC: Unsure if this is a bug ... ?"`, or use the
+GitHub discussions forum, so we can discuss it.  Talking about the code
+first is the best way to get started before submitting a pull request.
 
-If you are unsure how to start implementing an idea or fix:
-
-- :bug: open an issue, there are human friendly templates for _bugs_
-  and _feature requests_ at <https://github.com/kernelkit/infix/issues>
-- :speech_balloon: use the [Q&A Forum][discuss]
-- :technologist: The [Developer's Guide][devguide] is also a useful start
-
-> [!IMPORTANT]
-> Talking about code and problems first is often the best way to get
-> started before submitting a pull request.  We have found it always
-> saves time, yours and ours.
-
-:sparkles: General Guidelines
------------------------------
-
-When submitting bug reports or patches to bugs, please state which
-version the change is made against, what it does, and, more importantly
-*why* -- from your perspective, why is it a bug, why does the code need
-changing in this way.  Start with why.
-
-- :bug: Bug reports need metadata like Infix version or commit hash
-- :adhesive_bandage: Bug fixes also need version, and (preferably) a
-  corresponding issue number for the ChangeLog
-- :new: New features, you need to get approval of the YANG model first!  
-  :speech_balloon: Please use the [Forum][discuss], e.g., category:
-  *Ideas*, or open a :pray: feature request issue
-- :white_check_mark: New features also need new regression tests, this
-  can be basic tests or more complex use-case tests comprising multiple
-  subsystems, see [Testing Changes](#test_tube-testing-changes), below
+Either way, when sending an email, patch, or pull request, start by
+stating the version the change is made against, what it does, and why.
 
 Please take care to ensure you follow the project coding style and the
 commit message format.  If you follow these recommendations you help
-the maintainers and make it easier for them to include your code.
+the maintainer(s) and make it easier for them to include your code.
 
-:woman_technologist: Coding Style
----------------------------------
 
-Before jumping into code, remember to **document new features** and bug
-fixes.  Both the manual and ChangeLog are in the `doc/` sub-directory
-and it is expected that you provide a human-readable summary for the
-release notes (ChangeLog) and at least a configuration example in the
-manual for new features.
+Coding Style
+------------
 
-> [!TIP]
-> Consider ["Readme driven development"][RDD] for new features.  It is
-> amazing how many flaws in your own bright ideas come to bare when you
-> suddenly have to explain them to someone else!
+> **Tip:** Always submit code that follows the style of surrounding code!
 
-We expect code contributions for:
+First of all, lines are allowed to be longer than 72 characters these
+days.  In fact, there exist no enforced maximum, but keeping it around
+100 chars is OK.
 
-- C code in [Linux Coding Style][Linux]
-- Python code should follow [PEP-8][]
+The coding style itself is otherwise strictly Linux [KNF][].
 
-> [!IMPORTANT]
-> **However,** always submit code that follows the style of surrounding
-> code!  Legacy takes precedence, and remember, we read code a lot more
-> than write it, so legibility is important.
 
-The ChangeLog deserves a separate mention:
-
-- Releases are listed in reverse chronological order order, so the
-  latest/next release is at the beginning of the file
-- Only *user-facing bugs and features* are detailed, so code refactor,
-  new tests, etc. are not listed.
-- Add your changes/features to the Changes section
-- Add your Fix line in the Fixes section, in numeric order
-- Changes and fixes without an issue number are listed after all
-  numbered ones
-- YANG model changes are documented in their respective model, for
-  standard models, e.g., for `ietf-interfaces.yang`, the corresponding
-  `infix-interfaces.yang` detail augments/deviations as revisions.
-
-A final note, lines of code are allowed to be longer than 72 characters
-these days, unless you live by PEP-8 (see above).  There is no enforced
-maximum, but the team usually keep it around 100 characters for both C
-and Python.
-
-:test_tube: Testing Changes
----------------------------
-
-Please test your changes, no matter how trivial or obviously correct
-they may seem.  Nobody is infallible, making mistakes is only human.
-It is also the best insurance policy for your feature, it ensures your
-use-case will remain functional as the source base evolves.
-
-For new functionality we expect new regression tests to be added in
-the same pull request.
-
-For help getting started with testing, see the following resources:
-
-- [Developer's Guide][devguide]
-- [Regression Testing][testing]
-
-:memo: Commit Messages
-----------------------
+Commit Messages
+---------------
 
 Commit messages exist to track *why* a change was made.  Try to be as
 clear and concise as possible in your commit messages, and always, be
 proud of your work and set up a proper GIT identity for your commits:
 
-<img src="../doc/jack.png" width=70 align="right">
+    git config --global user.name "Jane Doe"
+    git config --global user.email jane.doe@example.com
 
-```bash
-$ git config --global user.name "Jacky Linker"
-$ git config --global user.email jacky.linker@example.com
-```
+Example commit message from the [Pro Git][gitbook] online book, notice
+how `git commit -s` is used to automatically add a `Signed-off-by`:
 
-Example commit message from one of many [online guides][cbeams].  Use
-`git commit -s` to automatically add a `Signed-off-by` for proof of
-origin, see [DCO][] for more info.
+    Brief, but clear and concise summary of changes
+    
+    More detailed explanatory text, if necessary.  Wrap it to about 72
+    characters or so.  In some contexts, the first line is treated as
+    the subject of an email and the rest of the text as the body.  The
+    blank line separating the ummary from the body is critical (unless
+    you omit the body entirely); tools like rebase can get confused if
+    you run the two together.
+    
+    Further paragraphs come after blank lines.
+    
+     - Bullet points are okay, too
+    
+     - Typically a hyphen or asterisk is used for the bullet, preceded
+       by a single space, with blank lines in between, but conventions
+       vary here
+    
+    Signed-off-by: Jane Doe <jane.doe@example.com>
 
-```text
-subsystem: brief, but clear and concise summary of changes
 
-More detailed explanatory text, if necessary.  Wrap it to about 72
-characters or so.  In some contexts, the first line is treated as
-the subject of an email and the rest of the text as the body.  The
-empty line separating summary from body is critical.  Tools like
-rebase can get confused if the empty line is missing.
-
-Further paragraphs should be separated with empty lines.
-
- - Bullet points are okay, too
-
- - Typically a hyphen or asterisk is used for the bullet, preceded
-   by a single space, with blank lines in between, but conventions
-   vary here
-
-If you use an issue tracker, put references to them at the bottom,
-like this:
-
-Resolves: #123
-See also: #456, #789
-
-Signed-off-by: Jacky Linker <jacky.linker@example.com>
-```
-
-This is an example of how to [automatically close][closing] an issue
-when the commit is merged to mainline.  Several keywords are available.
-
-:lock_with_ink_pen: Signing Commits with GPG
----------------------------------------------
-
-To ensure the authenticity and integrity of your contributions, we
-**require** all commits to be signed with GPG.  This cryptographically
-verifies that commits come from a trusted source.
-
-### Generating a GPG Key
-
-If you don't already have a GPG key, generate one:
-
-```bash
-$ gpg --full-generate-key
-```
-
-When prompted, choose:
-- Key type: `RSA and RSA` (default)
-- Key size: `4096` bits (recommended for security)
-- Expiration: `0` (key does not expire)
-- Real name and email: Use the same email as your Git configuration
-
-> [!NOTE]
-> We recommend keys that do not expire for signing commits.  Expiration
-> creates a "usability time bomb" without providing meaningful security
-> benefits for code signing.  See [this article][pgpfan] for details.
-
-### Configuring Git to Sign Commits
-
-First, find your GPG key ID:
-
-```bash
-$ gpg --list-secret-keys --keyid-format=long
-```
-
-Look for the line starting with `sec`, the key ID is the part after the `/`.
-For example, in `sec   rsa4096/ABCD1234EFGH5678`, the key ID is `ABCD1234EFGH5678`.
-
-Configure Git to use your GPG key:
-
-```bash
-$ git config --global user.signingkey ABCD1234EFGH5678
-$ git config --global commit.gpgsign true
-```
-
-The second command enables automatic signing for all commits.  Alternatively,
-you can sign individual commits with `git commit -S`.
-
-### Publishing Your Public Key
-
-To allow others to verify your signatures, publish your public key to a
-keyserver:
-
-```bash
-$ gpg --keyserver hkps://keys.openpgp.org --send-keys ABCD1234EFGH5678
-```
-
-> [!IMPORTANT]
-> The keyserver will send a verification email to the address associated
-> with your key.  You **must** click the link in that email to confirm
-> ownership before your key becomes searchable by email address.
-
-Alternative keyservers you can use:
-- `hkps://keyserver.ubuntu.com`
-- `hkps://pgp.mit.edu`
-
-### Adding Your GPG Key to GitHub
-
-For GitHub to show your commits as "Verified", you need to add your public
-key to your account:
-
-1. Export your public key:
-   ```bash
-   $ gpg --armor --export ABCD1234EFGH5678
-   ```
-
-2. Copy the entire output, including the `-----BEGIN PGP PUBLIC KEY BLOCK-----`
-   and `-----END PGP PUBLIC KEY BLOCK-----` lines.
-
-3. Go to [GitHub Settings → SSH and GPG keys](https://github.com/settings/keys)
-
-4. Click **New GPG key** and paste your public key.
-
-Now your signed commits will display a "Verified" badge on GitHub! :white_check_mark:
-
-For more details, see GitHub's [official documentation on commit signature verification][gpg-verify].
-
-:twisted_rightwards_arrows: Pull Requests
------------------------------------------
-
-> [!NOTE]
-> _The git repository is the canonical location for all information._
-
-A pull request should preferably address a single issue or change.  This
-may of course include multiple related changes, but what is important to
-remember is the bandwidth of the maintainers.  A smaller well documented
-PR is more likely to get attention quicker in some reviewer's busy day.
-
-Well documented here means that each commit message stands on its own,
-telling the complete story of the change.  In fact each commit should,
-as much as possible, be independent of other changes.  This is very
-important, not only when digging though logs to understand why a piece
-of code exists, but also when bisecting a problem -- each single commit
-should also compile and be possible to run.
-
-If you've worked on projects that send patches, like the Linux kernel or
-Buildroot, consider the pull request message body similar to the cover
-letter for a series of patches -- it's a summary of changes, and it is
-lost when the changes are merged to the mainline branch.
-
-:balance_scale: Code of Conduct
--------------------------------
+Code of Conduct
+---------------
 
 It is expected of everyone to respect the [Code of Conduct][conduct].
-The *"maintainers have the right and responsibility to remove, edit, or
-reject comments, commits, code, discussion forum threads, issues, and
-other contributions that are not aligned to this Code of Conduct."*
+The *"maintainers have the right and responsibility to remove, edit,
+or reject comments, commits, code, wiki edits, issues, and other
+contributions that are not aligned to this Code of Conduct."*
 
-[support]:  https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md
-[discuss]:  https://github.com/orgs/kernelkit/discussions
-[testing]:  https://github.com/kernelkit/infix/blob/main/doc/testing.md
-[devguide]: https://github.com/kernelkit/infix/blob/main/doc/developers-guide.md
-[Linux]:    https://www.kernel.org/doc/html/v6.9/process/coding-style.html
-[PEP-8]:    https://peps.python.org/pep-0008/
-[RDD]:      https://tom.preston-werner.com/2010/08/23/readme-driven-development
-[cbeams]:   https://cbea.ms/git-commit/#seven-rules
-[conduct]:    CODE-OF-CONDUCT.md
-[DCO]:        https://developercertificate.org/
-[closing]:    https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests
-[gpg-verify]: https://docs.github.com/en/authentication/managing-commit-signature-verification
-[pgpfan]:     https://articles.59.ca/doku.php?id=pgpfan:expire
+[1]:        ../doc/MAINTAINERS
+[KNF]:      https://en.wikipedia.org/wiki/Kernel_Normal_Form
+[gitbook]:  https://git-scm.com/book/ch5-2.html
+[conduct]:  CODE-OF-CONDUCT.md

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -1,69 +0,0 @@
-# https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
-name: "\U0001F41E Bug report"
-description: Create a bug report
-labels:
-  - "bug"
-  - "triage"
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank :heart: you for taking the time to fill out this bug report!**
-
-        We kindly ask that you search to see if an issue [already exists](https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+) for the bug you encountered.
-
-  - type: textarea
-    attributes:
-      label: Current Behavior
-      description: |
-        A clear and concise description of the issue you're experiencing.
-      value: |
-        For code snippets, logs, commands, etc., please use triple backticks:
-        ```
-        admin@infix-c0-ff-ee:/> show log
-        May 15 07:21:02 infix-00-00-00 container[3192]: Failed creating container test from curios-httpd-v24.03.0
-        - (press h for help or q to quit)
-        ```
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Expected Behavior
-      description: |
-        A clear and concise description of what you expected to happen.
-      value: |
-        ```
-        admin@infix-c0-ff-ee:/> show log
-        May 15 07:21:02 infix-c0-ff-ee container[3192]: Successfully created container test from curios-httpd-v24.03.0
-        - (press h for help or q to quit)
-        ```
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Steps To Reproduce
-      description: |
-        Steps to reproduce the issue.  For example:
-
-        1. Built from source
-        2. Upgrade to latest release, vYY.MM.P
-        3. Factory reset
-        4. Enable feature
-        5. Check the logs/show command/operational status
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: |
-        - Relevant parts of `startup-config`
-        - Output from `show interfaces`, if applicable
-        - Other observations, screenshots, log files ...
-
-        **Tip:** You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,7 +0,0 @@
-contact_links:
-  - name: "🔍 Look for my Issue"
-    url: https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+
-    about: Thank ❤️ you for your time! We kindly ask that you first check if an issue already exists.
-  - name: "💬 Discussions and Q&A"
-    url: https://github.com/kernelkit/infix/discussions
-    about: Discussions are perfect for quick questions, bouncing ideas, and things that may be a bug.

.github/ISSUE_TEMPLATE/feature-request.yml

@@ -1,45 +0,0 @@
-# https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
-name: "\U0001F6E0️ Feature request"
-description: Suggest a new feature, idea or improvement of the OS
-labels:
-  - "feature"
-  - "triage"
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank :heart: you for taking the time to fill out this feature request!**
-
-        We kindly ask that you search to see if an issue [already exists](https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+) for your feature.  We are also happy to accept contributions from our users. For details see [CONTRIBUTING](https://github.com/kernelkit/infix/blob/master/.github/CONTRIBUTING.md).
-
-  - type: textarea
-    attributes:
-      label: Description
-      description: |
-        A clear and concise description of the problem or missing feature.
-        **Example:** *I'm always frustrated when [...]*, or *I'd like to see support for [...]*
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Additional Information
-      description: |
-        Any other related information, e.g. existing YANG model(s), or possibly screenshots about the feature request here.
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: General Information
-      description: |
-        Appended to all feature requests for future readers.
-      value: |
-        Anyone can help out by [sponsoring][1] development of new features or [contributing][2] pull requests.
-        Please use this issue for discussions related to the feature.
-      
-        [1]: https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md
-        [2]: https://github.com/kernelkit/infix/blob/main/.github/CONTRIBUTING.md
-    validations:
-      required: true

.github/SECURITY.md

@@ -1,26 +0,0 @@
-# Security Policy
-
-## Reporting a Vulnerability
-
-If you discover a security vulnerability in Infix, please use GitHub's built-in
-[Report a Vulnerability](https://github.com/kernelkit/infix/security/advisories/new)
-feature for a private and secure disclosure.
-
-When reporting, include:
-
-- A clear description of the vulnerability.
-- Steps to reproduce the issue.
-- Potential impact of the vulnerability.
-
-## Supported Versions
-
-We provide security updates only for the main branch.
-
-Individual support contracts are provided by _Wires_. See
-[Support](https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md)
-for more information.
-
-## Acknowledgments
-
-We appreciate the efforts of the security community to help improve the security
-of Infix. Thank you for your responsible disclosure.

.github/SUPPORT.md

@@ -1,12 +0,0 @@
-Limited free support is only available using the online resources of the
-project on GitHub, and Discord, see <https://github.com/kernelkit>:
-
-&nbsp;&nbsp; :speech_balloon: <https://github.com/orgs/kernelkit/discussions>  
-&nbsp;&nbsp; :bug: <https://github.com/kernelkit/infix/issues>
-
-Support contracts, development of new features, fast-tracking of reviews
-and contributions, customer branding of Infix, and even customer specific
-features for dedicated products is provided by _Wires_.
-
-&nbsp;&nbsp; :globe_with_meridians: <https://www.wires.se>  
-&nbsp;&nbsp; :e-mail: <mailto:infix@wires.se>

.github/actions/cache-restore/action.yml

@@ -1,41 +0,0 @@
-name: 'Restore Build Caches'
-description: 'Restore dl/ and .ccache/ caches for Buildroot builds'
-inputs:
-  target:
-    description: 'Build target for cache key differentiation'
-    required: true
-  dl-prefix:
-    description: 'Prefix for dl/ cache key (e.g., "dl", "dl-boot")'
-    required: false
-    default: 'dl'
-  ccache-prefix:
-    description: 'Prefix for .ccache/ cache key (e.g., "ccache", "ccache-boot")'
-    required: false
-    default: 'ccache'
-  enabled:
-    description: 'Set to false to skip cache restoration'
-    required: false
-    default: 'true'
-runs:
-  using: 'composite'
-  steps:
-    - name: Restore Cache of dl/
-      if: ${{ inputs.enabled == 'true' }}
-      uses: actions/cache@v4
-      with:
-        path: dl/
-        key: ${{ inputs.dl-prefix }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
-        restore-keys: |
-          ${{ inputs.dl-prefix }}-
-          dl-
-
-    - name: Restore Cache of .ccache/
-      if: ${{ inputs.enabled == 'true' }}
-      uses: actions/cache@v4
-      with:
-        path: .ccache/
-        key: ${{ inputs.ccache-prefix }}-${{ inputs.target }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
-        restore-keys: |
-          ${{ inputs.ccache-prefix }}-${{ inputs.target }}-
-          ${{ inputs.ccache-prefix }}-
-          ccache-

.github/actions/podman-cleanup/action.yml

@@ -1,15 +0,0 @@
-name: 'Podman Cleanup'
-description: 'Clean up stale podman state from previous runs'
-runs:
-  using: 'composite'
-  steps:
-    - name: Cleanup podman state
-      shell: bash
-      run: |
-        set -x
-        podman ps -a              || true
-        podman stop -a            || true
-        podman rm -a -f           || true
-        podman volume prune -f    || true
-        podman system prune -a -f || true
-        podman system migrate     || true

.github/pull_request_template.md

@@ -1,28 +0,0 @@
-## Description
-
-<!--
-  -- A description of changes, detailing *why* changes are made.
-  -- Remember: assign a reviewer, or use @mentions if org. member.
-  -->
-
-## Checklist
-
-Tick *relevant* boxes, this PR is-a or has-a:
-
-- [ ] Bugfix
-  - [ ] Regression tests
-  - [ ] ChangeLog updates (for next release)
-- [ ] Feature
-  - [ ] YANG model change => revision updated?
-  - [ ] Regression tests added?
-  - [ ] ChangeLog updates (for next release)
-  - [ ] Documentation added?
-- [ ] Test changes
-  - [ ] Checked in changed Readme.adoc (make test-spec)
-  - [ ] Added new test to group Readme.adoc and yaml file
-- [ ] Code style update (formatting, renaming)
-- [ ] Refactoring (please detail in commit messages)
-- [ ] Build related changes
-- [ ] Documentation content changes
-  - [ ] ChangeLog updated (for major changes)
-- [ ] Other (please describe):

.github/workflows/add-issue-to-project.yml

@@ -1,16 +0,0 @@
-name: Adds all issues to project Infix & C:o
-
-on:
-  issues:
-    types:
-      - opened
-
-jobs:
-  add-to-project:
-    name: Add issue to project Infix&co
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/add-to-project@v1.0.2
-        with:
-          project-url: https://github.com/orgs/kernelkit/projects/3
-          github-token: ${{ secrets.ADD_TO_PROJECT }}

.github/workflows/bitsign.yml

@@ -1,215 +0,0 @@
-name: bitSign Infix Release
-
-on:
-  workflow_dispatch:
-    inputs:
-      release_version:
-        description: 'Release version (e.g., v25.08.0)'
-        required: true
-        type: string
-  push:
-    branches: [ sign-with-bitsign ]
-
-jobs:
-  sign-infix-release:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-
-    - name: Validate release version format
-      id: validate
-      run: |
-        # Use default version for push events, input version for manual dispatch
-        if [ "${{ github.event_name }}" = "push" ]; then
-          VERSION="v25.08.0"
-          echo "Using default version for push trigger: $VERSION"
-        else
-          VERSION="${{ inputs.release_version }}"
-          echo "Using input version for manual trigger: $VERSION"
-        fi
-
-        # Check if version starts with 'v' and has proper format
-        if ! echo "$VERSION" | grep -qE '^v[0-9]+\.[0-9]+(\.[0-9]+)?(-alpha[0-9]*|-beta[0-9]*|-rc[0-9]*)?$'; then
-          echo "❌ Invalid version format. Expected format: vYY.MM(.PP)(-alphaN|-betaN|-rcN)"
-          echo "Examples: v25.08.0, v25.08.0-alpha1, v25.08.0-rc1"
-          exit 1
-        fi
-
-        # Extract version without 'v' prefix for filename
-        FILE_VERSION="${VERSION#v}"
-        FILENAME="infix-x86_64-${FILE_VERSION}.tar.gz"
-        RELEASE_URL="https://github.com/kernelkit/infix/releases/download/${VERSION}/${FILENAME}"
-
-        echo "✅ Version format valid"
-        echo "file_version=${FILE_VERSION}" >> $GITHUB_OUTPUT
-        echo "filename=${FILENAME}" >> $GITHUB_OUTPUT
-        echo "release_url=${RELEASE_URL}" >> $GITHUB_OUTPUT
-
-    - name: Download Infix release
-      run: |
-        RELEASE_URL="${{ steps.validate.outputs.release_url }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-
-        echo "Downloading Infix release: $FILENAME"
-        echo "From: $RELEASE_URL"
-
-        if ! curl -L "$RELEASE_URL" -o "$FILENAME" --fail --show-error --progress-bar; then
-          echo "❌ Failed to download release file from: $RELEASE_URL"
-          echo "Please verify that the release version exists and contains the x86_64 build."
-          echo "You can check available releases at: https://github.com/kernelkit/infix/releases"
-          exit 1
-        fi
-
-        # Verify download
-        if [ -f "$FILENAME" ] && [ -s "$FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$FILENAME" | awk '{print $5}')
-          echo "✅ Successfully downloaded: $FILENAME ($FILE_SIZE)"
-        else
-          echo "❌ Failed to download release file"
-          exit 1
-        fi
-
-    - name: Create signing request
-      id: create_request
-      run: |
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        RELEASE="infix-x86_64-${FILE_VERSION}"
-
-        echo "Creating signing request for $FILENAME..."
-        echo "RELEASE parameter: $RELEASE"
-
-        # Create signing request using bitSign API
-        RESPONSE=$(curl -s -X POST "https://portal.bitsign.se/api/v1/requests" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -F "file=@$FILENAME" \
-          -F "key=bit42-Demo1" \
-          -F "job=Infix-x86" \
-          -F "parameters={\"RELEASE\": \"$RELEASE\"}")
-
-        echo "API Response: $RESPONSE"
-
-        # Check if request was successful
-        if echo "$RESPONSE" | jq -e '.success == true' > /dev/null; then
-          REQUEST_ID=$(echo "$RESPONSE" | jq -r '.requestId')
-          echo "✅ Request created successfully with ID: $REQUEST_ID"
-          echo "request_id=$REQUEST_ID" >> $GITHUB_OUTPUT
-        else
-          echo "❌ Failed to create signing request"
-          echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-          exit 1
-        fi
-
-    - name: Wait for signing completion
-      id: wait_completion
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        echo "Waiting for signing completion for request: $REQUEST_ID"
-
-        # Poll status for up to 10 minutes (600 seconds) - longer timeout for larger files
-        MAX_WAIT=600
-        WAITED=0
-
-        while [ $WAITED -lt $MAX_WAIT ]; do
-          RESPONSE=$(curl -s -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/status" \
-            -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}")
-
-          STATUS=$(echo "$RESPONSE" | jq -r '.status')
-          echo "Current status: $STATUS (waited ${WAITED}s)"
-
-          if [ "$STATUS" = "completed" ]; then
-            echo "✅ Signing completed successfully!"
-            break
-          elif [ "$STATUS" = "failed" ]; then
-            echo "❌ Signing failed"
-            echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-            exit 1
-          fi
-
-          sleep 10
-          WAITED=$((WAITED + 10))
-        done
-
-        if [ $WAITED -ge $MAX_WAIT ]; then
-          echo "❌ Timeout: Signing did not complete within ${MAX_WAIT} seconds"
-          exit 1
-        fi
-
-    - name: Download signed file
-      id: download_signed
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        SIGNED_FILENAME="infix-x86_64-${FILE_VERSION}-signed.tar.gz"
-
-        echo "Downloading signed file for request: $REQUEST_ID"
-        echo "Expected signed filename: $SIGNED_FILENAME"
-
-        # Download the signed file
-        curl -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/download" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -o "$SIGNED_FILENAME" \
-          --fail --show-error
-
-        if [ -f "$SIGNED_FILENAME" ] && [ -s "$SIGNED_FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$SIGNED_FILENAME" | awk '{print $5}')
-          echo "Successfully downloaded signed file: $SIGNED_FILENAME ($FILE_SIZE)"
-          echo "signed_filename=$SIGNED_FILENAME" >> $GITHUB_OUTPUT
-
-          # Calculate SHA256 checksums for both files
-          ORIGINAL_SHA256=$(sha256sum "$FILENAME" | cut -d' ' -f1)
-          SIGNED_SHA256=$(sha256sum "$SIGNED_FILENAME" | cut -d' ' -f1)
-          echo "original_sha256=$ORIGINAL_SHA256" >> $GITHUB_OUTPUT
-          echo "signed_sha256=$SIGNED_SHA256" >> $GITHUB_OUTPUT
-        else
-          echo "Failed to download signed file"
-          exit 1
-        fi
-
-    - name: Upload signed artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: signed-infix-${{ steps.validate.outputs.file_version }}
-        path: ${{ steps.download_signed.outputs.signed_filename }}
-        retention-days: 90
-
-    - name: Summary
-      run: |
-        # Determine the actual version used (could be from push or input)
-        if [ "${{ github.event_name }}" = "push" ]; then
-          ACTUAL_VERSION="v25.08.0"
-        else
-          ACTUAL_VERSION="${{ inputs.release_version }}"
-        fi
-
-        cat >> $GITHUB_STEP_SUMMARY << EOF
-        # bitSign Infix Release Signing Complete
-
-        The Infix release has been successfully signed using the bitSign API.
-
-        ## Signing Details
-
-        | Property | Value |
-        |----------|-------|
-        | 📦 **Original File** | \`${{ steps.validate.outputs.filename }}\` (\`${{ steps.download_signed.outputs.original_sha256 }}\`) |
-        | ✍️ **Signed File** | \`${{ steps.download_signed.outputs.signed_filename }}\` (\`${{ steps.download_signed.outputs.signed_sha256 }}\`) |
-        | 🔑 **Signing Key** | \`bit42-Demo1\` |
-        | ⚙️ **Job Type** | \`Infix-x86\` |
-        | 🆔 **Request ID** | \`${{ steps.create_request.outputs.request_id }}\` |
-        | 📋 **Release Version** | \`\$ACTUAL_VERSION\` |
-        | 🌐 **API Endpoint** | \`portal.bitsign.se\` |
-
-        ## Download Files
-
-        > **The signed release file is available as a workflow artifact:**
-        > **\`signed-infix-${{ steps.validate.outputs.file_version }}\`**
-        >
-        > The artifact contains the signed file: \`${{ steps.download_signed.outputs.signed_filename }}\`
-
-        ---
-
-        **Next Steps:** The signed release can now be distributed with cryptographic verification of authenticity.
-        EOF

.github/workflows/build-boot.yml

@@ -1,136 +0,0 @@
-name: Build Bootloaders
-
-on:
-  workflow_dispatch:
-    inputs:
-      branch:
-        description: 'Branch to build from'
-        default: 'main'
-        type: string
-
-jobs:
-  build:
-    name: Build ${{ matrix.defconfig }}
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        defconfig:
-          - aarch64_qemu_boot
-          - bpi_r3_sd_boot
-          - bpi_r3_emmc_boot
-          - cn9130_crb_boot
-          - fireant_boot
-          - nanopi_r2s_boot
-          - rpi2_boot
-          - rpi64_boot
-          - sama7g54_ek_emmc_boot
-          - sama7g54_ek_sd_boot
-    env:
-      MAKEFLAGS: -j5
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.branch || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          defconfig=${{ matrix.defconfig }}
-          version=$(awk -F'"' '/BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE=/ {print $2}' configs/${defconfig}_defconfig)
-          version=${version:-git}
-          filename=$(echo "${defconfig}" | tr '_' '-')
-
-          # TODO: Replace hardcoded rev with actual revision stepping
-          rev="latest"
-
-          archive="${filename}-${version}-${rev}.tar.gz"
-          dirname="${filename}-${version}-${rev}"
-
-          echo "defconfig=${defconfig}" >> $GITHUB_OUTPUT
-          echo "version=${version}"     >> $GITHUB_OUTPUT
-          echo "rev=${rev}"             >> $GITHUB_OUTPUT
-          echo "archive=${archive}"     >> $GITHUB_OUTPUT
-          echo "dirname=${dirname}"     >> $GITHUB_OUTPUT
-
-          echo "Building ${defconfig}_defconfig, version ${version}-${rev}, artifact ${archive} ..."
-
-      - uses: ./.github/actions/cache-restore
-        with:
-          target: ${{ matrix.defconfig }}
-          dl-prefix: dl-boot
-          ccache-prefix: ccache-boot
-
-      - name: Configure ${{ matrix.defconfig }}_defconfig
-        run: |
-          make ${{ matrix.defconfig }}_defconfig
-
-      - name: Build ${{ matrix.defconfig }}_defconfig
-        run: |
-          echo "Building ${{ matrix.defconfig }}_defconfig ..."
-          make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))
-
-      - name: Resulting size of build
-        run: |
-          printf "Size of output/images/: "
-          ls -l output/images/
-
-      - name: Prepare ${{ matrix.defconfig }} Artifact
-        run: |
-          cd output/
-          mv images ${{ steps.vars.outputs.dirname }}
-          tar cfz ${{ steps.vars.outputs.archive }} ${{ steps.vars.outputs.dirname }}/
-
-      - uses: actions/upload-artifact@v4
-        with:
-          path: output/${{ steps.vars.outputs.archive }}
-          name: artifact-${{ matrix.defconfig }}
-
-  publish:
-    name: Upload Bootloader Artifacts
-    runs-on: ubuntu-latest
-    needs: build
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Bootloader Build Complete! :rocket:
-
-          For the public download links of these bootloader artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest-boot>
-          EOF

.github/workflows/build-image.yml

@@ -1,330 +0,0 @@
-name: Create SD Card & eMMC Images
-
-on:
-  workflow_dispatch:
-    inputs:
-      board:
-        description: 'Board to create image for'
-        type: choice
-        required: true
-        options:
-          - raspberrypi-rpi2
-          - raspberrypi-rpi64
-          - bananapi-bpi-r3
-          - friendlyarm-nanopi-r2s
-          - microchip-sama7g54-ek
-        default: 'raspberrypi-rpi64'
-
-jobs:
-  create-image:
-    name: Create SD Card Image for ${{ inputs.board }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            genimage \
-            u-boot-tools \
-            parted \
-            gdisk \
-            qemu-utils \
-            dosfstools \
-            e2fsprogs \
-            genext2fs \
-            mtools \
-            jq
-
-      - name: Prepare build environment
-        run: |
-          # Set up directory structure similar to buildroot build
-          mkdir -p output/images
-          mkdir -p build
-
-      - name: Set bootloader and target based on board
-        run: |
-          case "${{ inputs.board }}" in
-            raspberrypi-rpi2)
-              echo "BOOTLOADER=rpi2-boot" >> $GITHUB_ENV
-              echo "ARCH=arm" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            raspberrypi-rpi64)
-              echo "BOOTLOADER=rpi64-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            bananapi-bpi-r3)
-              echo "BOOTLOADER_SD=bpi-r3-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=bpi-r3-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            friendlyarm-nanopi-r2s)
-              echo "BOOTLOADER=nanopi-r2s-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            microchip-sama7g54-ek)
-              echo "BOOTLOADER_SD=sama7g54-ek-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=sama7g54-ek-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=arm" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            *)
-              echo "Error: Unknown board ${{ inputs.board }}"
-              exit 1
-              ;;
-          esac
-          echo "Arch: $ARCH for board: ${{ inputs.board }}"
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "Building both SD and eMMC images"
-            echo "SD Bootloader: $BOOTLOADER_SD"
-            echo "eMMC Bootloader: $BOOTLOADER_EMMC"
-          else
-            echo "Building SD image only"
-            echo "Bootloader: $BOOTLOADER"
-          fi
-
-      - name: Download bootloader artifacts
-        run: |
-          # Download bootloader from latest-boot release tag
-          if [ "$BUILD_EMMC" = "true" ]; then
-            # Download both SD and eMMC bootloaders for boards that support both
-            echo "Downloading SD bootloader: ${BOOTLOADER_SD}"
-            gh release download latest-boot --pattern "*${BOOTLOADER_SD}*" --dir temp_bootloader_sd/
-            mkdir -p output_sd/images
-            cd temp_bootloader_sd/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_sd/images/
-            cd ../
-            rm -rf temp_bootloader_sd/
-
-            echo "Downloading eMMC bootloader: ${BOOTLOADER_EMMC}"
-            gh release download latest-boot --pattern "*${BOOTLOADER_EMMC}*" --dir temp_bootloader_emmc/
-            mkdir -p output_emmc/images
-            cd temp_bootloader_emmc/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_emmc/images/
-            cd ../
-            rm -rf temp_bootloader_emmc/
-
-            echo "SD bootloader files:"
-            ls -la output_sd/images/
-            echo "eMMC bootloader files:"
-            ls -la output_emmc/images/
-          else
-            # Single bootloader for boards that only support SD
-            gh release download latest-boot --pattern "*${BOOTLOADER}*" --dir temp_bootloader/
-
-            # Extract bootloader directly to output/images
-            cd temp_bootloader/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-            cd ../
-            rm -rf temp_bootloader/
-
-            echo "Bootloader files extracted to output/images:"
-            ls -la output/images/
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Download Infix artifacts
-        run: |
-          # Download from latest Kernelkit Trigger workflow for main branch
-          gh run list --workflow=164295764 --branch=main --limit=1 --status=success --json databaseId --jq '.[0].databaseId' > latest_infix_run_id
-          INFIX_RUN_ID=$(cat latest_infix_run_id)
-
-          if [ "$BUILD_EMMC" = "true" ]; then
-            # Copy Infix artifacts to both SD and eMMC output directories
-            gh run download ${INFIX_RUN_ID} --name artifact-${ARCH} --dir temp_infix/
-
-            cd temp_infix/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_sd/images/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_emmc/images/
-            cd ../
-            rm -rf temp_infix/
-
-            echo "Infix files extracted to output_sd/images:"
-            ls -la output_sd/images/
-            echo "Infix files extracted to output_emmc/images:"
-            ls -la output_emmc/images/
-          else
-            # Single output directory for SD-only boards
-            gh run download ${INFIX_RUN_ID} --name artifact-${ARCH} --dir temp_infix/
-
-            # Extract Infix directly to output/images
-            cd temp_infix/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-            cd ../
-            rm -rf temp_infix/
-
-            echo "Infix files extracted to output/images:"
-            ls -la output/images/
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Verify extracted files
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "Files available for SD image:"
-            ls -la output_sd/images/
-            echo ""
-            echo "Files available for eMMC image:"
-            ls -la output_emmc/images/
-          else
-            echo "Files available for mkimage.sh:"
-            ls -la output/images/
-            echo ""
-            echo "File types:"
-            file output/images/* || true
-          fi
-
-      - name: Create SD card image
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            export BINARIES_DIR=$PWD/output_sd/images
-            export BUILD_DIR=$PWD/build
-            export BR2_EXTERNAL_INFIX_PATH=$PWD
-            export RELEASE=""
-            export INFIX_ID="infix"
-            ./utils/mkimage.sh -t sdcard ${{ inputs.board }}
-          else
-            export BINARIES_DIR=$PWD/output/images
-            export BUILD_DIR=$PWD/build
-            export BR2_EXTERNAL_INFIX_PATH=$PWD
-            export RELEASE=""
-            export INFIX_ID="infix"
-            ./utils/mkimage.sh -t sdcard ${{ inputs.board }}
-          fi
-
-      - name: Create eMMC image
-        if: ${{ env.BUILD_EMMC == 'true' }}
-        run: |
-          export BINARIES_DIR=$PWD/output_emmc/images
-          export BUILD_DIR=$PWD/build
-          export BR2_EXTERNAL_INFIX_PATH=$PWD
-          export RELEASE=""
-          export INFIX_ID="infix"
-          ./utils/mkimage.sh -t emmc ${{ inputs.board }}
-
-      - name: Verify created images
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "SD card image:"
-            ls -lh output_sd/images/*-sdcard.img* 2>/dev/null || true
-            if ls output_sd/images/*-sdcard.img 1> /dev/null 2>&1; then
-              for img in output_sd/images/*-sdcard.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null | head -20
-              done
-            fi
-
-            echo ""
-            echo "eMMC image:"
-            ls -lh output_emmc/images/*-emmc.img* 2>/dev/null || true
-            if ls output_emmc/images/*-emmc.img 1> /dev/null 2>&1; then
-              for img in output_emmc/images/*-emmc.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null | head -20
-              done
-            fi
-
-            # Copy both images to output/images for artifact upload
-            mkdir -p output/images
-            cp output_sd/images/*-sdcard.img* output/images/ 2>/dev/null || true
-            cp output_emmc/images/*-emmc.img* output/images/ 2>/dev/null || true
-          else
-            echo "Contents of output/images after mkimage.sh:"
-            ls -lh output/images/
-
-            # Look for SD card image with pattern: *-sdcard.img
-            if ls output/images/*-sdcard.img 1> /dev/null 2>&1; then
-              echo "Found SD card image(s):"
-              for img in output/images/*-sdcard.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null || true
-              done
-            else
-              echo "No SD card image found matching pattern: *-sdcard.img"
-              echo "Available files:"
-              ls -la output/images/
-              exit 1
-            fi
-          fi
-
-      - name: Upload images as artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: images-${{ inputs.board }}
-          path: |
-            output/images/*-sdcard.img*
-            output/images/*-emmc.img*
-          retention-days: 30
-
-      - name: Create checksums
-        run: |
-          cd output/images/
-          for file in *-sdcard.img *-emmc.img; do
-            if [ -f "$file" ]; then
-              sha256sum "$file" > "$file.sha256"
-            fi
-          done
-
-      - name: Upload to release
-        uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "output/images/*-sdcard.img*,output/images/*-emmc.img*"
-
-      - name: Generate summary
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # SD Card & eMMC Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Arch:** ${{ env.ARCH }}
-          **SD Bootloader:** ${{ env.BOOTLOADER_SD }}
-          **eMMC Bootloader:** ${{ env.BOOTLOADER_EMMC }}
-          **Bootloader Source:** latest-boot release
-          **Infix Source:** Latest workflow run on main
-
-          ## Created Images
-          $(find output/images/ -name "*.img" -o -name "*.img.bmap" | xargs ls -lh 2>/dev/null | awk '{print "- " $9 " (" $5 ")"}' || echo "- No images found")
-
-          ## Download
-          Both SD card and eMMC images are available as workflow artifacts above and in the latest-boot release.
-          EOF
-          else
-            cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # SD Card Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Arch:** ${{ env.ARCH }}
-          **Bootloader:** ${{ env.BOOTLOADER }}
-          **Bootloader Source:** latest-boot release
-          **Infix Source:** Latest workflow run on main
-
-          ## Created Images
-          $(find output/images/ -name "*.img" -o -name "*.img.bmap" | xargs ls -lh 2>/dev/null | awk '{print "- " $9 " (" $5 ")"}' || echo "- No images found")
-
-          ## Download
-          The SD card image is available as a workflow artifact above.
-          EOF
-          fi

.github/workflows/build-release.yml

@@ -1,97 +0,0 @@
-# Needed for make pkg-stats
-# sudo apt install python3-aiohttp
----
-name: Build Release
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      use_cache:
-        required: false
-        type: boolean
-        default: true
-
-jobs:
-  build:
-    name: Build Infix ${{ inputs.version }} [${{ matrix.target }}]
-    runs-on: [self-hosted, release]
-    strategy:
-      matrix:
-        target: [aarch64, arm, x86_64]
-      fail-fast: false
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          clean: true
-          submodules: recursive
-
-      - uses: ./.github/actions/podman-cleanup
-
-      - name: Set Release Variables
-        id: vars
-        run: |
-          ver=${{ inputs.version }}
-          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          fver=${ver#v}
-          target=${{ matrix.target }}-${fver}
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-
-      - uses: ./.github/actions/cache-restore
-        with:
-          target: ${{ matrix.target }}
-          enabled: ${{ inputs.use_cache }}
-
-      - name: Configure & Build
-        env:
-          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
-        run: |
-          target=${{ matrix.target }}_defconfig
-          echo "Building $target ..."
-          make $target
-          make
-
-      - name: Generate SBOM from Build
-        run: |
-          # Generate manifest files in CSV format for CycloneDX
-          make legal-info
-          # Generate cpe.json for CycloneDX
-          make -s show-info > output/cpe.json
-          # Generate pkg-stats.{json,html} for humans
-          make pkg-stats
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Prepare Artifacts
-        run: |
-          cd output/
-
-          # Collect relevant files for SBOM and CPE info. for more info, see:
-          # https://github.com/CycloneDX/cyclonedx-buildroot
-          mkdir               images/sbom
-          mv pkg-stats.*      images/sbom/
-          mv cpe.json         images/sbom/
-          mv legal-info/*.csv images/sbom/
-
-          # Remove rootfs.squashfs from release (can be extracted from rootfs.itb)
-          # Saves ~131MB per architecture. See issue #858
-          rm -f images/rootfs.squashfs
-
-          mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-${{ matrix.target }}
-          path: output/*.tar.gz
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-disk-image-${{ matrix.target }}
-          path: output/images/*.qcow2

.github/workflows/build.yml

@@ -1,184 +1,77 @@
-name: Build
+name: Bob the Builder
 
+# Consider switching to 'on: workflow_dispatch' when activity increases.
 on:
-  workflow_dispatch:
-    inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
-        default: true
-        type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
+  push:
+    branches:
+      - '*'
+  pull_request:
+    branches:
+      - '*'
 
 jobs:
   build:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
+    name: Build ${{ matrix.platform }}
+    runs-on: ubuntu-latest
     strategy:
+      matrix:
+        platform: [aarch64, amd64]
       fail-fast: false
-    outputs:
-      build_id: ${{ steps.vars.outputs.INFIX_BUILD_ID }}
     steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: ./.github/actions/podman-cleanup
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
-
+      - uses: actions/checkout@v3
       - name: Set Build Variables
         id: vars
         run: |
-          if [ -n "${{ github.event.pull_request.head.sha }}" ]; then
-              # Since PRs are built from an internally generated merge
-              # commit, reverse lookups of PRs and/or commits from
-              # image version information are cumbersome.  Therefore:
-              # explicitly set a build id that references both the PR
-              # and the commit.
-              printf "INFIX_BUILD_ID=pr%d.%.7s\n" \
-                  "${{ github.event.number }}" "${{ github.event.pull_request.head.sha }}" \
-                  | tee -a $GITHUB_OUTPUT $GITHUB_ENV
-          fi
-
-          target=${{ env.TARGET }}
-          name=${{ env.NAME }}
-          echo "dir=${name}-${target}"        >> $GITHUB_OUTPUT
-          echo "tgz=${name}-${target}.tar.gz" >> $GITHUB_OUTPUT
-          echo "Building target ${target}_defconfig"
-
-      - uses: ./.github/actions/cache-restore
+          echo "dir=infix-${{ matrix.platform }}"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-${{ matrix.platform }}.tar.gz" >> $GITHUB_OUTPUT
+      - name: Restore Cache of dl/
+        uses: actions/cache@v3
         with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
+          path: dl/
+          key: dl-${{ matrix.platform }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-${{ matrix.platform }}-
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v3
+        with:
+          path: .buildroot-ccache/
+          key: ccache-${{ matrix.board }}-os-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.board }}-os-
+            ccache-${{ matrix.board }}-
+            ccache--os-
+      - name: Configure & Build
         run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
+          make ${{ matrix.platform }}_defconfig
+          make
+      - name: Prepare Artifact
         run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Prepare parallel build
-        id: parallel
-        run: |
-
-          if [ "$PARALLEL" == "true" ]; then
-             echo "BR2_PER_PACKAGE_DIRECTORIES=y" >> output/.config
-             MAKE="make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
-             echo "Building in parallel with -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
-          else
-             echo "Disabling parallel build"
-             MAKE="make"
-          fi
-          echo "MAKE=$MAKE" >> $GITHUB_OUTPUT
-
-      - name: Build ${{ env.TARGET }}
-        run: |
-          echo "Building ${{ env.TARGET }}_defconfig ..."
-          eval "${{ steps.parallel.outputs.MAKE }}"
-
-      - name:  Check SBOM from Build
-        run: |
-          make legal-info
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Resulting size of build
-        run: |
-          printf "Size of complete tree : "
-          du -sh .
-          printf "Size of output/       : "
-          du -sh output
-          printf "Size of dl/           : "
-          du -sh dl
-          printf "Size of output/images/: "
-          ls -l output/images/
-
-      - name: Prepare ${{ env.TARGET }} Artifact
-        run: |
-          cd output/
+          cd output
           mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
           tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
-      - uses: actions/upload-artifact@v4
+          ls -l
+          ls -l ${{ steps.vars.outputs.dir }}
+      - uses: actions/upload-artifact@v3
         with:
           path: output/${{ steps.vars.outputs.tgz }}
-          name: artifact-${{ env.TARGET }}
+  release:
+    name: Upload Latest Build
+    needs: build
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/download-artifact@v3
+      - uses: pyTooling/Actions/releaser@main
+        with:
+          tag: latest
+          rm: true
+          token: ${{ secrets.GITHUB_TOKEN }}
+          files: artifact/*
+      - name: Summary
+        run: |
+          cat <<EOF >> $GITHUB_STEP_SUMMARY
+          # Latest Build Complete! :rocket:
+          
+          For the public download links of these build artifacts, please see:
+           <https://github.com/kernelkit/infix/releases/tag/latest>
+          EOF

.github/workflows/check-kernel-release.yml

@@ -1,140 +0,0 @@
-name: Check Kernel 6.18 Release
-
-on:
-  schedule:
-    - cron: '0 3 * * *'
-  workflow_dispatch:
-
-jobs:
-  check-kernel:
-    if: github.repository == 'kernelkit/infix'
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out infix repository
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Fetch kernel.org and check for 6.18 release
-        id: check
-        run: |
-          set -e -o pipefail
-          # Fetch the kernel.org frontpage and extract 6.18 version
-          CURRENT_VERSION=$(curl -s https://www.kernel.org/ | grep -oP '6\.18\.\d+' | head -n1)
-
-          if [ -z "$CURRENT_VERSION" ]; then
-            echo "Failed to fetch kernel version"
-            exit 1
-          fi
-
-          echo "current_version=$CURRENT_VERSION" >> $GITHUB_OUTPUT
-          echo "Current 6.18 kernel version: $CURRENT_VERSION"
-
-          # Get the version from infix defconfig
-          INFIX_VERSION=$(grep 'BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE=' configs/aarch64_defconfig | cut -d'"' -f2)
-
-          echo "infix_version=$INFIX_VERSION" >> $GITHUB_OUTPUT
-          echo "Infix kernel version: $INFIX_VERSION"
-
-          if [ "$CURRENT_VERSION" != "$INFIX_VERSION" ]; then
-            # Check if there's already an open PR for this version
-            PR_EXISTS=$(gh pr list --state open --search "Upgrade to kernel $CURRENT_VERSION in:title" --json number --jq 'length')
-
-            if [ "$PR_EXISTS" -gt 0 ]; then
-              echo "new_release=false" >> $GITHUB_OUTPUT
-              echo "PR already exists for kernel $CURRENT_VERSION, skipping"
-            else
-              echo "new_release=true" >> $GITHUB_OUTPUT
-              echo "🎉 New 6.18 kernel released: $CURRENT_VERSION (infix version: $INFIX_VERSION)"
-            fi
-          else
-            echo "new_release=false" >> $GITHUB_OUTPUT
-            echo "No change - still at $CURRENT_VERSION"
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Generate branch name
-        if: steps.check.outputs.new_release == 'true'
-        id: branch
-        run: |
-          BRANCH_NAME="kernel-upgrade-$(uuidgen | tr '[:upper:]' '[:lower:]')"
-          echo "name=$BRANCH_NAME" >> $GITHUB_OUTPUT
-          echo "Branch name: $BRANCH_NAME"
-
-      - name: Import GPG key
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          # Import the GPG key
-          echo "${{ secrets.AEL_BOT_GPG_PRIVATE_KEY }}" | gpg --batch --import
-
-          # Get the key ID
-          GPG_KEY_ID=$(gpg --list-secret-keys --keyid-format=long | grep '^sec' | head -1 | awk '{print $2}' | cut -d'/' -f2)
-          echo "GPG_KEY_ID=$GPG_KEY_ID" >> $GITHUB_ENV
-
-          # Configure GPG agent for non-interactive use
-          echo "allow-loopback-pinentry" >> ~/.gnupg/gpg-agent.conf
-          echo "pinentry-mode loopback" >> ~/.gnupg/gpg.conf
-          gpg-connect-agent reloadagent /bye || true
-
-      - name: Set up git credentials
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          set -e -o pipefail
-          git config --global user.email "ael-bot@users.noreply.github.com"
-          git config --global user.name "ael-bot"
-          git config --global commit.gpgsign true
-          git config --global user.signingkey ${{ env.GPG_KEY_ID }}
-
-          # Configure git to use the token for HTTPS operations
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "git@github.com:"
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "https://github.com/"
-
-      - name: Run kernel upgrade script
-        if: steps.check.outputs.new_release == 'true'
-        env:
-          GIT_TERMINAL_PROMPT: 0
-          BRANCH_NAME: ${{ steps.branch.outputs.name }}
-        run: |
-          set -e -o pipefail
-          ./utils/kernel-upgrade.sh linux 6.18 "$BRANCH_NAME"
-
-      - name: Create pull request
-        if: steps.check.outputs.new_release == 'true'
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-          script: |
-            const { data: pulls } = await github.rest.pulls.list({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              head: `${context.repo.owner}:kernel-upgrade`,
-              state: 'open'
-            });
-
-            if (pulls.length === 0) {
-              const { data: pr } = await github.rest.pulls.create({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                title: `Upgrade to kernel ${{ steps.check.outputs.current_version }}`,
-                head: '${{ steps.branch.outputs.name }}',
-                base: 'main',
-                body: `Automated kernel upgrade to version ${{ steps.check.outputs.current_version }}.\n\n**Previous version:** ${{ steps.check.outputs.infix_version }}\n**New version:** ${{ steps.check.outputs.current_version }}\n**Source:** https://www.kernel.org/\n\nThis PR was automatically created by the kernel release monitoring workflow.`
-              });
-
-              await github.rest.issues.addLabels({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                labels: ['ci:main']
-              });
-
-              await github.rest.pulls.requestReviewers({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                pull_number: pr.number,
-                reviewers: ['troglobit', 'wkz', 'mattiaswal']
-              });
-            }

.github/workflows/coverity.yml

@@ -1,94 +0,0 @@
-name: Coverity Scan
-
-on:
-  schedule:
-    - cron: '5 0 * * 6'
-  workflow_dispatch:
-
-env:
-  PROJECT_NAME: Infix
-  CONTACT_EMAIL: troglobit@gmail.com
-
-jobs:
-  coverity:
-    if: ${{github.repository_owner == 'kernelkit'}}
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - name: Fetch latest Coverity Scan MD5
-        id: var
-        env:
-          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
-        run: |
-          wget -q https://scan.coverity.com/download/cxx/linux64         \
-               --post-data "token=$TOKEN&project=${PROJECT_NAME}&md5=1" \
-               -O coverity-latest.tar.gz.md5
-          echo "md5=$(cat coverity-latest.tar.gz.md5)" | tee -a $GITHUB_OUTPUT
-
-      - uses: actions/cache@v4
-        id: cache
-        with:
-          path: coverity-latest.tar.gz
-          key: ${{ runner.os }}-coverity-${{ steps.var.outputs.md5 }}
-          restore-keys: |
-            ${{ runner.os }}-coverity-${{ steps.var.outputs.md5 }}
-            ${{ runner.os }}-coverity-
-            ${{ runner.os }}-coverity
-
-      - name: Download Coverity Scan
-        env:
-          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
-        run: |
-          if [ ! -f coverity-latest.tar.gz ]; then
-            wget -q https://scan.coverity.com/download/cxx/linux64   \
-                 --post-data "token=$TOKEN&project=${PROJECT_NAME}" \
-                 -O coverity-latest.tar.gz
-          else
-            echo "Latest Coverity Scan available from cache :-)"
-            md5sum coverity-latest.tar.gz
-          fi
-          mkdir coverity
-          tar xzf coverity-latest.tar.gz --strip 1 -C coverity
-
-      - name: Install dependencies
-        run: |
-          sudo apt-get -y update
-          sudo apt-get -y install pkg-config libjansson-dev libev-dev \
-                       libcrypt-dev libglib2.0-dev libpcre2-dev       \
-                       libuev-dev
-
-      - name: Build dependencies
-        run: |
-          git clone https://github.com/CESNET/libyang.git
-          mkdir libyang/build
-          (cd libyang/build && cmake .. && make all && sudo make install)
-          git clone https://github.com/sysrepo/sysrepo.git
-          mkdir sysrepo/build
-          (cd sysrepo/build && cmake .. && make all && sudo make install)
-          git clone https://github.com/troglobit/libite.git
-          (cd libite && ./autogen.sh && ./configure && make && sudo make install)
-          make dep
-
-      - name: Build applications for Coverity
-        run: |
-          export PATH=`pwd`/coverity/bin:$PATH
-          cov-build --dir cov-int make coverity
-
-      - name: Submit results to Coverity Scan
-        env:
-          TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
-        run: |
-          tar czvf ${PROJECT_NAME}.tgz cov-int
-          curl \
-            --form token=$TOKEN \
-            --form email=${CONTACT_EMAIL} \
-            --form file=@${PROJECT_NAME}.tgz \
-            --form version=$(git rev-parse HEAD) \
-            --form description="${PROJECT_NAME} $(git rev-parse HEAD)" \
-            https://scan.coverity.com/builds?project=${PROJECT_NAME}
-
-      - name: Upload build.log
-        uses: actions/upload-artifact@v4
-        with:
-          name: coverity-build.log
-          path: cov-int/build-log.txt

.github/workflows/docs.yml

@@ -1,68 +0,0 @@
-name: User Guide Generator
-
-on:
-  push:
-    branches:
-      - doc
-      - main
-    tags:
-      - 'v*'
-    paths:
-      - 'doc/**'
-      - 'mkdocs.yml'
-      - '.github/workflows/docs.yml'
-
-permissions:
-  contents: write
-
-concurrency:
-  group: "docs-${{ github.ref }}"
-  cancel-in-progress: false
-
-jobs:
-  docs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.x'
-
-      - name: Install dependencies
-        run: |
-          pipx install mkdocs
-          pipx inject mkdocs mkdocs-material
-          pipx inject mkdocs pymdown-extensions
-          pipx inject mkdocs mkdocs-callouts
-          pipx inject mkdocs mike
-          pipx inject mkdocs mkdocs-to-pdf
-          pipx inject mkdocs mkdocs-glightbox
-          # Workaround, if pipx inject fails to install symlink
-          ln -s "$(pipx environment -V PIPX_LOCAL_VENVS)/mkdocs/bin/mike" \
-                "$(pipx environment -V PIPX_BIN_DIR)/mike" || true
-
-      - name: Configure Git
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-
-      - name: Deploy dev version
-        if: github.event_name == 'push' && (github.ref == 'refs/heads/doc' || github.ref == 'refs/heads/main')
-        run: |
-          mike deploy --push --update-aliases dev latest
-          mike set-default --push latest
-
-      - name: Deploy tagged version
-        if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags/v')
-        run: |
-          TAG=${GITHUB_REF#refs/tags/v}
-          # Extract YEAR.MONTH from tag (e.g., v25.06.0-beta1 -> 25.06)
-          VERSION=$(echo $TAG | sed -E 's/^([0-9]+\.[0-9]+)(\.[0-9]+)?(-.*)?$/\1/')
-          echo "Deploying tag $TAG as docs version $VERSION"
-          mike deploy --push --update-aliases $VERSION latest
-          mike set-default --push latest

.github/workflows/generic-x86-build.yml

@@ -1,84 +0,0 @@
-name: Generic X86 GitHub Build
-
-on:
-  push:
-
-jobs:
-  build:
-    if: github.repository != 'kernelkit/infix'
-    name: Infix x86_64
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Free Disk Space
-        uses: jlumbroso/free-disk-space@main
-        with:
-          tool-cache: true
-          android: true
-          dotnet: true
-          haskell: true
-          large-packages: true
-          docker-images: true
-          swap-storage: false
-
-      - name: Install build dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            bc binutils build-essential bzip2 cpio \
-            diffutils file findutils git gzip \
-            libncurses-dev libssl-dev perl patch \
-            python3 rsync sed tar unzip wget \
-            autopoint bison flex autoconf automake \
-            mtools
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ github.repository }}
-          ref: ${{ github.ref }}
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          echo "INFIX_BUILD_ID=${{ github.run_id }}" >> $GITHUB_OUTPUT
-          echo "dir=Infix-x86_64" >> $GITHUB_OUTPUT
-          echo "tgz=Infix-x86_64.tar.gz" >> $GITHUB_OUTPUT
-
-      - name: Configure x86_64_minimal
-        run: |
-          make x86_64_minimal_defconfig
-
-      - name: Unit Test x86_64
-        run: |
-          make test-unit
-
-      - name: Build x86_64_minimal
-        run: |
-          make
-
-      - name: Check SBOM
-        run: |
-          make legal-info
-
-      - name: Report Build Size
-        run: |
-          du -sh .
-          du -sh output
-          du -sh dl || true
-          ls -l output/images/
-
-      - name: Prepare Artifact
-        run: |
-          cd output/
-          mv images Infix-x86_64
-          ln -s Infix-x86_64 images
-          tar cfz Infix-x86_64.tar.gz Infix-x86_64
-
-      - uses: actions/upload-artifact@v4
-        with:
-          path: output/Infix-x86_64.tar.gz
-          name: artifact-x86_64
-

.github/workflows/inventory.yml

@@ -1,88 +0,0 @@
-name: Manny the Manager
-
-on:
-  workflow_dispatch:
-    inputs:
-      checkout:
-        required: true
-        type: boolean
-      cleanup:
-        required: true
-        type: boolean
-      peek:
-        required: true
-        type: boolean
-
-jobs:
-  inventory:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Disk usage ...
-        run: |
-          cd
-          du -hs .[^.]*
-      - name: Disk inventory (1/2) ...
-        run: |
-          echo "df -h ========================================================================="
-          df -h
-          echo "mounts ========================================================================"
-          mount
-      - name: File inventory (1/2) ...
-        run: |
-          echo "Current directory: $(pwd)"
-          echo "Files in $HOME ================================================================"
-          ls $HOME
-          echo "Find $HOME ===================================================================="
-          find $HOME
-      - name: Container inventory ...
-        run: |
-          echo "Available container images: ==================================================="
-          docker images
-          echo "Available containers: ========================================================="
-          docker ps -a
-
-  checkout:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: ./.github/actions/cache-restore
-        with:
-          target: x86_64
-          dl-prefix: dl-netconf
-      - name: Disk inventory (2/2) ...
-        run: |
-          echo "df -h ========================================================================="
-          df -h
-          echo "mounts ========================================================================"
-          mount
-      - name: File inventory (2/2) ...
-        run: |
-          echo "Current directory: $(pwd)"
-          echo "Files in $HOME ================================================================"
-          ls $HOME
-          echo "Find $HOME ===================================================================="
-          find $HOME
-
-  peeky:
-    if: ${{ inputs.peek }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Peek & Poke ...
-        run: |
-          whoami
-          ls -l /mnt/
-          cat /mnt/DATALOSS_WARNING_README.txt
-          sudo mkdir /mnt/x-aarch64
-          sudo chown $(id -un):$(id -gn) /mnt/x-aarch64
-          ls -l /mnt/
-
-  cleanup:
-    if: ${{ inputs.cleanup }}
-    needs: [inventory, peeky]
-    runs-on: ubuntu-latest
-    steps:
-      - name: Cleaning up cruft ...
-        run: |
-          docker image prune -af
-          docker volume prune -f
-          docker container prune -f

.github/workflows/publish.yml

@@ -1,44 +0,0 @@
-name: Publish latest Infix
-
-on:
-  workflow_dispatch:
-  workflow_call:
-
-jobs:
-  publish:
-    name: Upload Latest Build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          replacesArtifacts: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Latest Build Complete! :rocket:
-
-          For the public download links of these build artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-          EOF

.github/workflows/release.yml

@@ -1,118 +0,0 @@
-# This job can be started by a git tag or using the workflow dispatch.
-#
-# The version string *must* be of the format: vYY.MM(-alphaN|-betaN|-rcN)
-#
-# In /etc/os-release this string is used for VERSION, VERSION_ID, and
-# IMAGE_VERSION, with the 'v' prefix.  In release artifact filenames,
-# and zip file directory names, the 'v' is dropped per convention.
-name: Release General
-
-on:
-  push:
-    tags:
-      - 'v[0-9]*.*'
-  workflow_dispatch:
-    inputs:
-      version:
-        required: false
-        type: string
-
-jobs:
-  set-version:
-    if: github.repository == 'kernelkit/infix' && startsWith(github.ref, 'refs/tags/')
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.set-ver.outputs.version }}
-    steps:
-      - id: set-ver
-        run: |
-          if [ -n "${{ inputs.version }}" ]; then
-              ver=${{ inputs.version }}
-          else
-              ver=${GITHUB_REF#refs/tags/}
-          fi
-          echo "version=${ver}" >> $GITHUB_OUTPUT
-
-  build:
-    needs: set-version
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: ${{ needs.set-version.outputs.version }}
-      use_cache: true
-
-  release:
-    name: Release Infix ${{ github.ref_name }}
-    needs: build
-    runs-on: [self-hosted, release]
-    permissions:
-      contents: write
-      discussions: write
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          submodules: 'true'
-
-      - uses: ./.github/actions/podman-cleanup
-
-      - name: Set Release Variables
-        id: rel
-        run: |
-          if [ -n "${{ inputs.version }}" ]; then
-              ver=${{ inputs.version }}
-          else
-              ver=${GITHUB_REF#refs/tags/}
-          fi
-          echo "ver=${ver}"     >> $GITHUB_OUTPUT
-          echo "cat="           >> $GITHUB_OUTPUT
-          if echo $ver | grep -qE 'v[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
-            echo "pre=true"     >> $GITHUB_OUTPUT
-            echo "latest=false" >> $GITHUB_OUTPUT
-          elif echo $ver | grep -qE '^v[0-9]+\.[0-9]+(\.0)?$'; then
-            echo "pre=false"    >> $GITHUB_OUTPUT
-            echo "latest=true"  >> $GITHUB_OUTPUT
-            echo "cat=Releases" >> $GITHUB_OUTPUT
-          else
-            echo "pre=false"    >> $GITHUB_OUTPUT
-            echo "latest=false" >> $GITHUB_OUTPUT
-          fi
-          echo "pre=${{ steps.rel.outputs.pre }}"
-          echo "latest=${{ steps.rel.outputs.latest }}"
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
-      - name: Extract ChangeLog entry ...
-        run: |
-          cat doc/ChangeLog.md | ./utils/extract-changelog.sh > release.md
-          cat release.md
-
-      - uses: ncipollo/release-action@v1
-        with:
-          name: Infix ${{ github.ref_name }}
-          prerelease: ${{ steps.rel.outputs.pre }}
-          makeLatest: ${{ steps.rel.outputs.latest }}
-          discussionCategory: ${{ steps.rel.outputs.cat }}
-          bodyFile: release.md
-          artifacts: "*.tar.gz*,*.qcow2*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Infix ${{ github.ref_name }} Released! :rocket:
-
-          For the public download links of this release, please see:
-           <https://github.com/kernelkit/infix/releases/tag/${{ github.ref_name }}>
-          EOF

.github/workflows/test.yml

@@ -1,137 +0,0 @@
-name: Test Infix
-
-on:
-  workflow_dispatch:
-    inputs:
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        required: false
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      ninepm-conf:
-        required: false
-        type: string
-        default: ''
-      test-path:
-        required: false
-        type: string
-        default: 'test'
-      pre_test_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-  NINEPM_CONF: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.ninepm-conf || inputs.ninepm-conf }}
-  TEST_PATH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.test-path || inputs.test-path }}
-
-jobs:
-  test:
-    name: Regression Test ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [self-hosted, regression]
-    steps:
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: ./.github/actions/podman-cleanup
-
-      - name: Run pre-test script
-        if: ${{ inputs.pre_test_script != '' }}
-        run: |
-          cat > ./pre-test.sh << 'EOF'
-          ${{ inputs.pre_test_script }}
-          EOF
-          chmod +x ./pre-test.sh
-          bash ./pre-test.sh
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          if [ -n "${{ needs.build.outputs.build_id }}" ]; then
-              echo "INFIX_BUILD_ID=${{ needs.build.outputs.build_id }}" \
-                   >>$GITHUB_ENV
-          fi
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Restore ${{ env.TARGET }} output/
-        run: |
-          target=${{ env.TARGET }}
-          name=${{ inputs.name }}
-
-          ls -l
-          mkdir -p output
-          mv ${name}-${target}.tar.gz output/
-          cd output/
-          tar xf ${name}-${target}.tar.gz
-          ln -s ${name}-${target} images
-
-      - name: Regression Test ${{ env.TARGET }}
-        run: |
-          if [ -n "$NINEPM_CONF" ]; then
-            export NINEPM_PROJ_CONFIG="${GITHUB_WORKSPACE}/$NINEPM_CONF"
-            echo "DEBUG: NINEPM_PROJ_CONFIG is '$NINEPM_PROJ_CONFIG'"
-          fi
-          make test
-
-      - name: Publish Test Result for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          cat $TEST_PATH/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY
-
-      - name: Generate Test Report for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          make test-dir="$(pwd)/$TEST_PATH" test-report
-
-      - name: Upload Test Report as Artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: test-report
-          path: output/images/test-report.pdf

.github/workflows/trigger.yml

@@ -1,91 +0,0 @@
-name: CI
-
-on:
-  pull_request:
-    types: [opened, synchronize, reopened, labeled]
-  push:
-    branches:
-      - main
-      - ci-work
-  workflow_dispatch:
-
-concurrency:
-  group: ci-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  # Gate all builds through this check to prevent wasted runs.  Only run on
-  # 'labeled' events when the label is actually 'ci:main'.  Concurrency control
-  # above handles canceling the 'opened' event when 'labeled' arrives quickly
-  # after (e.g., when creating a PR with ci:main already attached). See #1154.
-  check-trigger:
-    if: |
-      startsWith(github.repository, 'kernelkit/') &&
-      (github.event_name != 'pull_request' ||
-       github.event.action != 'labeled' ||
-       github.event.label.name == 'ci:main')
-    runs-on: ubuntu-latest
-    outputs:
-      x86_64_target: ${{ steps.set-targets.outputs.x86_64_target }}
-      aarch64_target: ${{ steps.set-targets.outputs.aarch64_target }}
-      arm_target: ${{ steps.set-targets.outputs.arm_target }}
-    steps:
-      - run: |
-          echo "Triggering build, logging meta data ..."
-          echo "Event  : ${{ github.event_name }}"
-          echo "Action : ${{ github.event.action }}"
-          echo "Ref    : ${{ github.ref }}"
-          echo "PR     : ${{ github.event.pull_request.number }}"
-          echo "Label  : ${{ github.event.label.name }}"
-      - id: set-targets
-        run: |
-          if [[ "${{ github.event_name }}" == "pull_request" ]] &&           \
-             ! echo '${{ toJSON(github.event.pull_request.labels.*.name) }}' \
-             | grep -q "ci:main"; then
-            echo "x86_64_target=x86_64_minimal" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64_minimal" >> $GITHUB_OUTPUT
-            echo "arm_target=arm_minimal" >> $GITHUB_OUTPUT
-          else
-            echo "x86_64_target=x86_64" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64" >> $GITHUB_OUTPUT
-            echo "arm_target=arm" >> $GITHUB_OUTPUT
-          fi
-  unit-test:
-    needs: check-trigger
-    uses: ./.github/workflows/unit-test.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-x86_64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-aarch64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.aarch64_target }}
-
-  build-arm:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.arm_target }}
-
-  test-run-x86_64:
-    needs: [check-trigger, build-x86_64]
-    uses: ./.github/workflows/test.yml
-    with:
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-      name: "infix"
-
-  test-publish-x86_64:
-    if: ${{ github.repository_owner == 'kernelkit' && github.ref_name == 'main' }}
-    needs: test-run-x86_64
-    uses: ./.github/workflows/publish.yml

.github/workflows/unit-test.yml

@@ -1,116 +0,0 @@
-name: unit-test
-
-on:
-  workflow_dispatch:
-    inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
-        default: true
-        type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-
-jobs:
-  unit-tests:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
-    strategy:
-      fail-fast: false
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: ./.github/actions/podman-cleanup
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
-
-      - uses: ./.github/actions/cache-restore
-        with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Unit Test ${{ env.TARGET }}
-        run: |
-          make test-unit

.github/workflows/weekly.yml

@@ -1,68 +0,0 @@
-# Weekly release build to catch flaky tests and verify clean builds.
-# Runs without caches (ccache) to ensure reproducibility. See issue #1003.
-name: Weekly Build
-
-on:
-  schedule:
-    - cron: '5 0 * * 6'  # Saturday at 00:05 UTC, same as Coverity
-  workflow_dispatch:
-
-jobs:
-  build:
-    if: github.repository == 'kernelkit/infix'
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: "latest"
-      use_cache: false
-
-  publish:
-    name: Publish Weekly Build
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums
-        run: |
-          for file in *.tar.gz; do
-            sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
-      - uses: ncipollo/release-action@v1
-        with:
-          tag: latest
-          name: "Latest Weekly Build"
-          prerelease: true
-          makeLatest: false
-          allowUpdates: true
-          removeArtifacts: true
-          body: |
-            Automated weekly build from `${{ github.sha }}`.
-
-            This build runs without caches to catch potential flaky tests and build issues.
-            Not intended for production use - use official releases instead.
-
-            **Commit:** ${{ github.sha }}
-            **Built:** ${{ github.run_id }}
-          artifacts: "*.tar.gz*,*.qcow2*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Weekly Build Published! :package:
-
-          Latest artifacts uploaded to:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-
-          Built from commit: \`${{ github.sha }}\`
-          EOF

.gitignore

@@ -1,14 +1,6 @@
 *~
-.claude
 .gdb_history
-.claude
-AGENTS.md
-/.backup
 /.ccache
 /dl
 /output*
-/x-*
-/test/.venv
-/test/.log
 /local.mk
-/test/spec/Readme.adoc

.gitmodules

@@ -1,9 +1,3 @@
 [submodule "buildroot"]
 	path = buildroot
-	url = ../buildroot.git
-[submodule "9pm"]
-	path = test/9pm
-	url = ../9pm
-[submodule "qeneth"]
-	path = test/qeneth
-	url = ../qeneth.git
+	url = https://github.com/buildroot/buildroot.git

Config.in

@@ -1,130 +1,13 @@
-source "$BR2_EXTERNAL_INFIX_PATH/board/Config.in"
+menu "Packages"
 
-menu "Branding"
-
-config INFIX_VENDOR
-	string "Vendor name"
-	default "KernelKit"
-	help
-	  The name of the operating system vendor. This is the name of the
-	  organization or company which produces the OS.
-
-	  This name is intended to be exposed in "About this system" UIs or
-	  software update UIs when needed to distinguish the OS vendor from
-	  the OS itself.  It is intended to be human readable.
-
-	  Used for VENDOR_NAME in /etc/os-release and GNS3 appliance files.
-
-config INFIX_VENDOR_HOME
-	string "Vendor URL"
-	help
-	  The homepage of the OS vendor.  The value should be in RFC3986
-	  format, and should be "http:" or "https:" URLs.  Only one URL shall
-	  be listed in the setting.
-
-	  Optional, used for VENDOR_HOME in /etc/os-release
-
-config INFIX_NAME
-	string "Operating system name"
-	default "Infix"
-	help
-	  Mandatory.  Used for identifying the OS as NAME in /etc/os-release
-	  and product_name in GNS3 appliance files.
-
-config INFIX_ID
-	string "Operating system identifier"
-	default "infix"
-	help
-	  A lower-case string (no spaces or other characters outside of 0–9,
-          a–z, '.', '_' and '-') identifying the operating system, excluding
-          any version information and suitable for processing by scripts or
-          usage in generated filenames.
-
-	  Mandatory.  Used for identifying the OS as ID in /etc/os-release and
-	  in the generated image name: ID-ARCH-VERSION.img
-
-config INFIX_IMAGE_ID
-	string "Operating system image name"
-	default "${INFIX_ID}-${BR2_ARCH}"
-	help
-	  A lower-case string (no spaces or other characters outside of 0–9,
-	  a–z, ".", "_" and "-"), for naming critical image files, directories
-	  and archives containting the operating system.
-
-	  Mandatory.  When INFIX_RELEASE is set, this string is appended to
-	  the IMAGE_ID with a '-' separator.
-
-config INFIX_COMPATIBLE
-	string "Operating system compatible string"
-	default "${INFIX_IMAGE_ID}"
-	help
-	  A lower-case string (no spaces or other characters outside of 0–9,
-	  a–z, ".", "_" and "-"), used for image identification at upgrade.
-	  E.g., the RAUC [system] compatible string.
-
-	  Mandatory.  Defaults to $INFIX_IMAGE_ID, which in turn is composed
-	  of $INFIX_ID-$BR2_ARCH.
-
-config INFIX_TAGLINE
-	string "Operating system tagline"
-	default "Infix OS — Immutable.Friendly.Secure"
-	help
-	  Mandatory. Used for identifying the OS, e.g. as PRETTY_NAME in
-	  /etc/os-release and description in the GNS3 appliance.
-
-	  This is also show at boot when the system init process starts.
-
-config INFIX_DESC
-	string "Operating system description"
-	help
-	  Optional.  Used for long description texts about the OS.  E.g.,
-	  the GNS3 appliance file description field.  Saved in the file
-	  /etc/os-release as INFIX_DESC.
-
-config INFIX_HOME
-	string "Operating system URL"
-	help
-	  Used for identifying the OS, e.g. as HOME_URL in /etc/os-release
-
-config INFIX_DOC
-	string "Operating system docs"
-	help
-	  Optional.  Main documentation URL, will be shown in /etc/os-release
-	  as DOCUMENTATION_URL.
-
-config INFIX_SUPPORT
-	string "Operating system support"
-	help
-	  Main support page for the operating system, if there is any.  This
-	  is primarily intended for operating systems which vendors provide
-	  support for.  May be a http:, https:, or mailto: URI.
-
-	  Optional.  Shown, e.g., as SUPPORT_URL in /etc/os-release or
-	  maintainer_email in .gns3a.
-
-config INFIX_OEM_PATH
-	string "Path to OEM br2-external"
-	help
-	  A br2-external using Infix will likely want to version the branded
-	  OS using their own GIT tags.  Set this variable to point to the base
-	  directory (absolute path) and the Infix post-build.sh will call `git
-	  describe -C $INFIX_OEM_PATH`.
-
-	  Note: for release builds the global variable INFIX_RELEASE overrides
-	  the version information derived from `git describe`.  However, the
-	  GIT version is always saved as the BUILD_ID in /etc/os-releases.
+source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in"
 
 endmenu
 
-# For /etc/os-release, uses CondtionArchitechture= from systemd.unit(5)
-config INFIX_ARCH
-	string
-	default "arm"     if BR2_arm
-	default "arm64"   if BR2_aarch64
-	default "mips64"  if BR2_mips64
-	default "riscv64" if BR2_riscv
-	default "x86_64"  if BR2_x86_64
+menu "QEMU Virtualization"
+
+source "$BR2_EXTERNAL_INFIX_PATH/qemu/Config.in"
+
+endmenu
 
-source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in.host"
 source "$BR2_EXTERNAL_INFIX_PATH/board/common/Config.in"

Makefile

@@ -1,13 +1,8 @@
-export BR2_EXTERNAL ?= $(CURDIR)
+export BR2_EXTERNAL := $(CURDIR)
 export PATH         := $(CURDIR)/bin:$(PATH)
 
 ARCH ?= $(shell uname -m)
-O    ?= output
-
-# If a relative output path is specified, we have to translate it to
-# an absolute one before handing over control to Buildroot, which will
-# otherwise treat it as relative to ./buildroot.
-override O := $(if $(filter /%,$O),$O,$(CURDIR)/$O)
+O    ?= $(CURDIR)/output
 
 config := $(O)/.config
 bmake   = $(MAKE) -C buildroot O=$(O) $1
@@ -16,9 +11,6 @@ bmake   = $(MAKE) -C buildroot O=$(O) $1
 all: $(config) buildroot/Makefile
 	@+$(call bmake,$@)
 
-check dep coverity:
-	@make -C src $@
-
 $(config):
 	@+$(call bmake,list-defconfigs)
 	@echo "\e[7mERROR: No configuration selected.\e[0m"
@@ -26,22 +18,11 @@ $(config):
 	@echo "'make <board>_defconfig' before building an image."
 	@exit 1
 
+
 %: | buildroot/Makefile
 	@+$(call bmake,$@)
 
-legal-info: | buildroot/Makefile
-	$(call bmake,legal-info LINUX_LICENSE_FILES=COPYING)
-
-cyclonedx: | buildroot/Makefile
-	@echo "Generating package information..."
-	@$(MAKE) --no-print-directory -C buildroot O=$(O) show-info | ./buildroot/utils/generate-cyclonedx > $(O)/cyclonedx-sbom.json
-	@echo "CycloneDX SBOM generated: $(O)/cyclonedx-sbom.json"
-
-# Workaround, see board/x86_64/board.mk
-test:
-	@+$(call bmake,$@)
-
 buildroot/Makefile:
 	@git submodule update --init
 
-.PHONY: all check coverity dep test cyclonedx
+.PHONY: all

README.md

@@ -1,183 +1,96 @@
-[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
+<img align="right" src="doc/text3134.png" alt="Infix Linux Networking Made Easy">
 
-<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=480 padding=10>
+Infix is an embedded Linux Network Operating System (NOS) based on
+[Buildroot][1], [Finit][2], [ifupdown-ng][3], and [Clixon][6].
+Providing an easy-to-maintain and easy-to-port Open Source base for
+networked equipment.
 
-Turn any ARM or x86 device into a powerful, manageable network appliance
-in minutes. From $35 Raspberry Pi boards to enterprise switches — deploy
-routers, IoT gateways, edge devices, or custom network solutions that
-just work.
+See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
+page for out pre-built images.  The *Latest Build* has the bleeding edge
+images, if possible we recommend using a versioned release.
 
-## Our Values
+> Login with user 'root', no password by default on plain builds.  See
+> the online `help` command for an introduction to the system.
 
-**🔒 Immutable**  
-Your system never breaks.  Read-only filesystem with atomic upgrades
-means no configuration drift, no corrupted updates, and instant rollback
-if something goes wrong.  Deploy once, trust forever.
 
-**🤝 Friendly**  
-Actually easy to use. Auto-generated CLI from standard YANG models comes
-with built-in help for every command — just hit <kbd>?</kbd> or
-<kbd>TAB</kbd> for context-aware assistance.
+Hardware
+--------
 
-Familiar NETCONF & RESTCONF APIs and [comprehensive documentation][4]
-mean you're never stuck.  Whether you're learning networking or managing
-enterprise infrastructure.
+### aarch64
 
-**🛡️ Secure**  
-Built with security as a foundation, not an afterthought.  Minimal
-attack surface, separation between system and data, and container
-isolation.  Sleep better knowing your infrastructure is protected.
+By default, Infix builds with support for the following boards (you
+may enable additional boards in the config, of course):
 
-## Why Choose Infix
+- Marvell CN9130 CRB
+- Marvell EspressoBIN
+- Microchip SparX-5i PCB135 (eMMC)
 
-**Hardware Flexibility**: Start with a $35 Raspberry Pi, scale to
-enterprise switching hardware.  Same OS, same tools, same reliability.
+See the aarch64 specific [documentation](board/aarch64/README.md) for more
+information.
 
-**Standards-Based**: Built around YANG models and IETF standards. Learn
-once, use everywhere - no vendor lock-in.
+### amd64
 
-**Container Ready**: Run your applications alongside networking
-functions.  GPIO access, dedicated Ethernet ports, custom protocols —
-your device, your rules.
+Primarily intended to be run under [QEMU][] for development & test as
+well as evaluation, demo and [training][] purposes, e.g. using [GNS3][]
+or [Qeneth][7].
 
-## Use Cases
 
-1. **Home Labs & Hobbyists**:  
-   Transform a Raspberry Pi into a full-featured router with WiFi  
-1. **IoT & Edge Computing**:  
-   Bridge devices to the cloud with reliable, updatable gateways  
-1. **Small Business Networks**:  
-   Enterprise-grade features without the complexity or cost  
-1. **Developers & Makers**:  
-   Test networking concepts, prototype IoT solutions, or build custom
-   appliances
-1. **Network Professionals**:  
-   Consistent tooling from development to production deployment.  
-   How about a digital twin using raw Qemu or [GNS3](https://gns3.com/infix)!
+QEMU
+----
 
-## Quick Example
+A virtualized instance can easily be launched from a Linux system, with
+Qemu installed, by issuing `make run`.
 
-Configure an interface in seconds - the CLI guides you with built-in help:
+Some settings, e.g. networking, can be configured via `make menuconfig`
+under `External options -> QEMU virtualization`.
 
-<pre><code>admin@infix-12-34-56:/> <b>configure</b>
-admin@infix-12-34-56:/config/> <b>edit interface eth0</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4</b> <kbd>TAB</kbd>
-      address     autoconf      bind-ni-name     dhcp 
-      enabled     forwarding    mtu              neighbor
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4 address 192.168.2.200 prefix-length 24</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>show</b>
-type ethernet;
-ipv4 {
-  address 192.168.2.200 {
-    prefix-length 24;
-  }
-}
-admin@infix-12-34-56:/config/interface/eth0/> <b>diff</b>
-interfaces {
-  interface eth0 {
-+    ipv4 {
-+      address 192.168.2.200 {
-+        prefix-length 24;
-+      }
-+    }
-  }
-}
-admin@infix-12-34-56:/config/interface/eth0/> <b>leave</b>
-admin@infix-12-34-56:/> <b>show interfaces</b>
-<u>INTERFACE       PROTOCOL   STATE       DATA                                  </u>
-eth0            ethernet   UP          52:54:00:12:34:56
-                ipv4                   192.168.2.200/24 (static)
-                ipv6                   fe80::5054:ff:fe12:3456/64 (link-layer)
-lo              ethernet   UP          00:00:00:00:00:00
-                ipv4                   127.0.0.1/8 (static)
-                ipv6                   ::1/128 (static)
-admin@infix-12-34-56:/> <b>copy running startup</b>
-</code></pre>
 
-Notice how <kbd>TAB</kbd> completion shows available options, `show`
-displays current config, and `diff` shows exactly what changed before
-you commit your changes with the `leave` command.
+GNS3
+----
 
-For more information, see [CLI documentation][3].
+Download the [latest build][0] of amd64, unpack in a dedicated directory
+and use ["Import Appliance"][9] to install the `.gns3a` file into GNS3.
+Infix will show up in the "Router" category, it has 10 interfaces
+available by default for use as switch ports or routing.
 
-## Get Started
 
-Get [pre-built images][5] for your hardware.  Use the CLI, web
-interface, or standard NETCONF/RESTCONF tools, e.g., `curl`.  Add
-containers for any custom functionality you need.
+Origin & Licensing
+------------------
 
-### Supported Platforms
+Infix is entirely built on Open Source components (packages).  Most of
+them, as well as the build system with its helper scripts and tools, is
+from [Buiildroot][1], which is distributed under the terms of the GNU
+General Public License (GPL).  See the file COPYING for details.
 
-- **Raspberry Pi 2B/3B/4B/CM4** - Perfect for home labs, learning, and prototyping
-- **Banana Pi-R3** - Your next home router and gateway
-- **NanoPi R2S** - Compact dual-port router in a tiny package
-- **x86_64** - Run in VMs or on mini PCs for development and testing
-- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM64 platforms
-- **Microchip SparX-5i** - Enterprise switching capabilities
-- **NXP i.MX8MP EVK** - Highly capable ARM64 SoC
-- **StarFive VisionFive2** - RISC-V architecture support
+Some files in Buildroot contain a different license statement.  Those
+files are licensed under the license contained in the file itself.
 
-*Why start with Raspberry Pi?* It's affordable, widely available, has
-built-in WiFi + Ethernet, and runs the exact same Infix OS you'd deploy
-in production. Perfect for learning, prototyping, or even small-scale
-deployments.
+Buildroot and Infix also bundle patch files, which are applied to the
+sources of the various packages.  Those patches are not covered by the
+license of Buildroot or Infix.  Instead, they are covered by the license
+of the software to which the patches are applied.  When said software is
+available under multiple licenses, the patches are only provided under
+the publicly accessible licenses.
 
-> 📖 **[Complete documentation][4]** • 💬 **[Join our Discord][discord-url]**
+Infix releases include the license information covering all Open Source
+packages.  This is extracted automatically at build time using the tool
+`make legal-info`.  Any proprietary software built on top of Infix, or
+Buildroot, would need separate auditing to ensure it does not link with
+any GPL[^1] licensed library.
 
-## Technical Details
+[^1]: Infix image builds use GNU libc (GLIBC) which is covered by the
+	[LGPL][4].  The LGPL *does allow* proprietary software, as long as
+	said software is linking dynamically, [not statically][5], to GLIBC.
 
-<a href="https://bitsign.se">
-  <picture>
-    <source media="(prefers-color-scheme: dark)" srcset="https://bitsign.se/assets/badges/bitsign-badge-dark-mode.png">
-    <source media="(prefers-color-scheme: light)" srcset="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png">
-    <img alt="bitSign - Code Signing" src="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png" align="right" width=150 padding=10>
-  </picture>
-</a>
-
-Built on proven open-source foundations: [Linux][0], [Buildroot][1], and
-[sysrepo][2] — for reliability you can trust:
-
-- **Immutable OS**: Read-only filesystem, atomic updates, instant rollback
-- **YANG Configuration**: Industry-standard models with auto-generated tooling
-- **Hardware Acceleration**: Linux switchdev support for wire-speed packet processing
-- **Container Integration**: Docker support with flexible network and hardware access
-- **Memory Efficient**: Runs comfortably on devices with as little as 256 MB RAM
-- **Code Signing**: Releases are cryptographically signed for integrity verification
-
-Perfect for everything from resource-constrained edge devices to
-high-throughput network appliances.
-
-With the entire system modeled in YANG, scalability is no longer an
-issue, be it in development, testing, or end users deploying and
-monitoring their devices.  All knobs and dials are accessible from the
-CLI (console/SSH), or remotely using the native NETCONF or RESTCONF
-APIs.
-
-> Check the *[Latest Build][]* for bleeding-edge features.
-
----
-
-<div align="center">
-  <a href="https://github.com/wires-se"><img src="https://raw.githubusercontent.com/wires-se/.github/main/profile/play.svg" width=300></a>
-  <br />Infix development is sponsored by <a href="https://wires.se">Wires</a>
-</div>
-
-![Alt](https://repobeats.axiom.co/api/embed/5ce7a2a67edc923823afa0f60c327a6e8575b6e9.svg "Repobeats analytics image")
-
-[0]: https://www.kernel.org
-[1]: https://buildroot.org/ "Buildroot Homepage"
-[2]: https://www.sysrepo.org/ "Sysrepo Homepage"
-[3]: https://kernelkit.org/infix/latest/cli/introduction/
-[4]: https://kernelkit.org/infix/
-[5]: https://github.com/kernelkit/infix/releases
-[Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest "Latest build"
-[License]:         https://en.wikipedia.org/wiki/GPL_license
-[License Badge]:   https://img.shields.io/badge/License-GPL%20v2-blue.svg
-[Release]:         https://github.com/kernelkit/infix/releases
-[Release Badge]:   https://img.shields.io/github/v/release/kernelkit/infix 
-[GitHub]:          https://github.com/kernelkit/infix/actions/workflows/build.yml/
-[GitHub Status]:   https://github.com/kernelkit/infix/actions/workflows/build.yml/badge.svg
-[Coverity Scan]:   https://scan.coverity.com/projects/29393
-[Coverity Status]: https://scan.coverity.com/projects/29393/badge.svg
-[discord-badge]:   https://img.shields.io/discord/1182652155618918411.svg?logo=discord
-[discord-url]:     https://discord.gg/6bHJWQNVxN
+[0]: https://github.com/kernelkit/infix/releases/tag/latest
+[1]: https://buildroot.org/
+[2]: https://github.com/troglobit/finit
+[3]: https://github.com/ifupdown-ng/ifupdown-ng
+[4]: https://en.wikipedia.org/wiki/GNU_Lesser_General_Public_License
+[5]: https://lwn.net/Articles/117972/
+[6]: https://github.com/clicon/clixon
+[7]: https://github.com/wkz/qeneth
+[9]: https://docs.gns3.com/docs/using-gns3/beginners/import-gns3-appliance/
+[QEMU]: https://www.qemu.org/
+[GNS3]: https://gns3.com/
+[training]: https://addiva-elektronik.github.io/

TODO.org

@@ -0,0 +1,22 @@
+* TODO doc: User Guide
+
+- Feature set and scope, e.g.
+  - Device discovery: SSDP, LLDP, mDNS-SD how do they work, interfacing with Windows/macOS/Linux
+  - Network redundancy protocols: STP/RSTP, MRP
+- Configuring the system; using ifupdown2, enabling/disabling services
+- Diagnosing the system; using rmon, port mirroring, debugging services, searching logs
+- Limitations, e.g., PRP/HSR or IEEE 802.1CB will not be possible to support
+- Tips & Trix
+
+* TODO document how to set up passwordless SSH
+* TODO add setup wizard, based on pdmenu
+
+ - setup-port script to tweak ethtool settings
+ - setup-iface script to configure a layer-3 interface
+ - setup-bridge script that creates a new bridge with config from cmdline
+ - setup-firewall script that can do basic firewall rules and masquerading
+
+* TODO split out qemu Config.in to a "make run-menuconfing"
+* TODO rename qemu/ to run/, perhaps?
+* TODO ship qemu/* with output/images/ for stand-alone runs of older builds
+

board/Config.in

@@ -1,8 +0,0 @@
-menu "Board Support"
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/arm/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/riscv64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/x86_64/Config.in"
-
-endmenu

board/README.md

@@ -1,18 +0,0 @@
-Board Support
-=============
-
-The board support for an architecture always starts with Qemu support,
-this is what each `linux_defconfig` at the very least sets up.  Then
-each `$BR2_ARCH` has additional BSPs, e.g., Banana Pi BPI-R3.
-
-The `board/` directory is matched with the `configs/*_defconfigs` and
-the only execption is `board/common/`, which holds all shared files for
-Infix builds.
-
-Each `board/$BR2_ARCH/` can then have vendor/product sub-directories
-for the BSPs which may contain "fixups" to the base kernel config and
-any additional device tree files that should be included as well.
-
-To rebuild a board-specific package, e.g. NanoPi R2S:
-
-    make friendlyarm-nanopi-r2s-rebuild all

board/aarch64/Config.in

@@ -1,13 +0,0 @@
-if BR2_aarch64
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/alder-alder/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r3/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/freescale-imx8mp-evk/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/friendlyarm-nanopi-r2s/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-cn9130-crb/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-espressobin/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/microchip-sparx5-pcb135/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/raspberrypi-rpi64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/styx-dcp-sc-28p/Config.in"
-
-endif

board/aarch64/README.md

@@ -1,11 +1,67 @@
 aarch64
 =======
 
-Board Specific Documentation
-----------------------------
+Microchip SparX-5i PCB135 (eMMC)
+--------------------------------
 
-- [Banana Pi R3](banana-pi-r3/)
-- [Marvell CN9130-CRB](cn9130-crb/)
-- [Microchip SparX-5i PCB135 (eMMC)](sparx5-pcb135/)
-- [NanoPi R2S](r2s/)
-- [Raspberry Pi 64-bit](raspberry-pi64/)
+At present, only FIT images are supported via the SparX-5i eval
+board's U-Boot, which must contain a valid load address. If you are
+using this board, after selecting your base configuration, run the
+following command to supplement the existing config with the required
+FIT options:
+
+    make board-enable-sparx-fit
+
+### Unbricking
+
+1. Don't load a corrupt bootloader to begin with
+2. Done
+
+If, for some reason, you didn't manage to follow step 1, you can use
+the `FLASH_PROG`(`J4`) connector on the board to access the SPI flash
+directly.
+
+Using a [Bus Blaster][BB3] in combination with [dangerspi][dangerspi],
+you can load a new bootloader. The schematic below details how to
+connect the Bus Blaster to the board, but the concept should be
+portable to any debugger/device based around an FTDI2232 chip.
+
+```
+Bus Blaster:         FLASH_PROG (J4):
+       .---.              .---.
+   VTG >o o| VTG      SCK >o o| GND
+  TRST |o o| GND     MISO |o o| #RESET_FLASH
+   TDI |o o| GND           o o| 3V3
+   TMS |o o| GND      #CS |o o| #SYSRESET
+   TCK  o o| GND     MOSI |o o| GND
+  RTCK  o o| GND          '---'
+   TDO |o o| GND
+ TSRST |o o| GND
+ DBGRQ |o o| GND
+DBGACK |o o| GND
+       '---'
+```
+
+| Bus Blaster | FLASH_PROG     |
+|-------------|----------------|
+| `VTG`       | `3V3`          |
+| `GND`       | `GND`          |
+|             |                |
+| `VTG`       | `#RESET_FLASH` |
+| `GND`       | `#SYSRESET`    |
+|             |                |
+| `TDI`       | `MOSI`         |
+| `TMS`       | `#CS`          |
+| `TCK`       | `SCK`          |
+| `TDO`       | `MISO`         |
+
+With the cable in place, build U-Boot with the correct configuration:
+
+    make fireant_boot_defconfig && make
+
+To flash it to the board, connect the cable to `J4` and run:
+
+    make board-sparx-flash-uboot
+
+[BB3]: http://dangerousprototypes.com/docs/Bus_Blaster#Bus_Blaster_v3
+[dangerspi]: https://github.com/wkz/dangerspi

board/aarch64/alder-alder/Config.in

@@ -1,5 +0,0 @@
-config BR2_PACKAGE_ALDER_ALDER
-	bool "Alder"
-	depends on BR2_aarch64
-	help
-	  Alder

board/aarch64/alder-alder/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2024 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/alder-alder/alder-alder.mk

@@ -1,2 +0,0 @@
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/alder-alder/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += alder/alder.dtb

board/aarch64/alder-alder/dts/alder/alder-mpp.h

@@ -1,76 +0,0 @@
-#ifndef _ALDER_MPP_H
-#define _ALDER_MPP_H
-
-#define CP_SMI_MDIO(X)        X( "mpp0",   none, 0, 0)
-#define CP_SMI_MDC(X)         X( "mpp1",   none, 0, 0)
-#define CP_XSMI_MDIO(X)       X( "mpp2",   none, 0, 0)
-#define CP_XSMI_MDC(X)        X( "mpp3",   none, 0, 0)
-/*  mpp4: Unused */
-/*  mpp5: Unused */
-/*  mpp6: Unused */
-#define SFP9_TX_FAULT(X)      X( "mpp7", cp0_gpio1,  7, GPIO_ACTIVE_HIGH)
-#define SFP9_TX_DISABLE(X)    X( "mpp8", cp0_gpio1,  8, GPIO_ACTIVE_HIGH)
-#define SFP9_MOD_ABS(X)       X( "mpp9", cp0_gpio1,  9, GPIO_ACTIVE_LOW)
-#define SW_RESETn(X)          X("mpp10", cp0_gpio1, 10, GPIO_ACTIVE_LOW)
-#define SFP9_RS0(X)           X("mpp11", cp0_gpio1, 11, GPIO_ACTIVE_HIGH)
-/* mpp12: Unused */
-#define CP_SPI1_MISO(X)       X("mpp13", none, 0, 0)
-#define CP_SPI1_CS0(X)        X("mpp14", none, 0, 0)
-#define CP_SPI1_MOSI(X)       X("mpp15", none, 0, 0)
-#define CP_SPI1_SCK(X)        X("mpp16", none, 0, 0)
-#define WDT_TICKLE(X)         X("mpp17", cp0_gpio1, 17, GPIO_ACTIVE_HIGH)
-/* mpp18: Unused */
-/* mpp19: Unused */
-/* mpp20: Unused */
-/* mpp21: Unused */
-/* mpp22: Unused */
-/* mpp23: Unused */
-#define DDR_TEN(X)            X("mpp24", cp0_gpio1, 24, GPIO_ACTIVE_HIGH)
-#define ETH9_RESETn(X)        X("mpp25", cp0_gpio1, 25, GPIO_ACTIVE_LOW)
-#define SW_INTn(X)            X("mpp26", cp0_gpio1, 26, IRQ_TYPE_LEVEL_LOW)
-#define SFP9_RS1(X)           X("mpp27", cp0_gpio1, 27, GPIO_ACTIVE_HIGH)
-#define SFP10_TX_FAULT(X)     X("mpp28", cp0_gpio1, 28, GPIO_ACTIVE_HIGH)
-#define CP_UA0_RXD(X)         X("mpp29", none, 0, 0)
-#define CP_UA0_TXD(X)         X("mpp30", none, 0, 0)
-#define SFP10_TX_DISABLE(X)   X("mpp31", cp0_gpio1, 31, GPIO_ACTIVE_HIGH)
-#define SFP10_MOD_ABS(X)      X("mpp32", cp0_gpio2,  0, GPIO_ACTIVE_LOW)
-#define I2C_IRQ(X)            X("mpp33", cp0_gpio2,  1, IRQ_TYPE_LEVEL_LOW)
-#define SFP10_RS0(X)          X("mpp34", cp0_gpio2,  2, GPIO_ACTIVE_HIGH)
-#define CP_I2C1_SDA(X)        X("mpp35", none, 0, 0)
-#define CP_I2C1_SCK(X)        X("mpp36", none, 0, 0)
-#define CP_I2C0_SCK(X)        X("mpp37", none, 0, 0)
-#define CP_I2C0_SDA(X)        X("mpp38", none, 0, 0)
-#define SFP10_RX_LOS(X)       X("mpp39", cp0_gpio2,  7, GPIO_ACTIVE_HIGH)
-#define SFP10_RS1(X)          X("mpp40", cp0_gpio2,  8, GPIO_ACTIVE_HIGH)
-#define CP_SD_CRD_PWR_OFF(X)  X("mpp41", none,  0, 0)
-#define CP_SD_HST_18_EN(X)    X("mpp42", none,  0, 0)
-#define CP_SD_CRD_DT(X)       X("mpp43", none,  0, 0)
-#define ETH9_INTn(X)          X("mpp44", cp0_gpio2, 12, GPIO_ACTIVE_LOW)
-/* mpp45: Unused */
-#define ETH10_RESETn(X)       X("mpp46", cp0_gpio2, 14, GPIO_ACTIVE_LOW)
-#define I2C_RESETn(X)         X("mpp47", cp0_gpio2, 15, GPIO_ACTIVE_LOW)
-#define ETH10_INTn(X)         X("mpp48", cp0_gpio2, 16, GPIO_ACTIVE_LOW)
-#define DEV_MODEn(X)          X("mpp49", cp0_gpio2, 17, GPIO_ACTIVE_LOW)
-#define USB1_VBUS_ENABLE(X)   X("mpp50", cp0_gpio2, 18, GPIO_ACTIVE_HIGH)
-#define USB1_VBUS_ERROR_OC(X) X("mpp51", cp0_gpio2, 19, GPIO_ACTIVE_HIGH)
-/* mpp52: Unused */
-#define SFP9_RX_LOS(X)        X("mpp53", cp0_gpio2, 21, GPIO_ACTIVE_HIGH)
-/* mpp54: Unused */
-#define CP_SD_LED(X)          X("mpp55", none,  0, 0)
-#define CP_SD_CLK(X)          X("mpp56", none,  0, 0)
-#define CP_SD_CMD(X)          X("mpp57", none,  0, 0)
-#define CP_SD_D0(X)           X("mpp58", none,  0, 0)
-#define CP_SD_D1(X)           X("mpp59", none,  0, 0)
-#define CP_SD_D2(X)           X("mpp60", none,  0, 0)
-#define CP_SD_D3(X)           X("mpp61", none,  0, 0)
-/* mpp62: Unused */
-
-/* Macros to extract MPP info in different formats */
-#define MPP_ID(_mpp, _chip, _no, _flags) _mpp
-#define MPP_GPIO_CHIP(_mpp, _chip, _no, _flags) _chip
-
-#define MPP_GPIO_REF(_mpp, _chip, _no, _flags) <&_chip _no _flags>
-#define MPP_GPIO_REF_NO_CHIP(_mpp, _chip, _no, _flags) <_no _flags>
-#define MPP_IRQ_REF(_mpp, _chip, _no, _flags) <&_chip _no _flags>
-
-#endif	/* _ALDER_MPP_H */

board/aarch64/alder-alder/dts/alder/alder.dts

@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 Marvell International Ltd.
- * Copyright (C) 2023 Addiva Elektronik AB
- *
- * Device tree for Alder board
- */
-
-#include "alder.dtsi"

board/aarch64/alder-alder/dts/alder/alder.dtsi

@@ -1,719 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2021 Marvell International Ltd.
- * Copyright (C) 2023 Addiva Elektronik AB
- *
- * Device tree for Alder board
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-#include "../marvell/cn9130-patched.dtsi"
-
-#include "alder-mpp.h"
-
-/ {
-	model = "Alder";
-	compatible = "alder,alder",
-		"marvell,armada-ap807-quad",
-		"marvell,armada-ap807";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-
-		infix {
-			vpds = <&vpd_cpu &vpd_product &vpd_power>;
-			usb-ports = <&cp0_usb3_1>;
-			usb-port-names = "USB";
-		};
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x80000000>;
-	};
-};
-
-
-/* UART0 (Console) */
-
-&cp0_pinctrl {
-	cp0_uart0_pins: cp0-uart0-pins {
-		marvell,pins = CP_UA0_RXD(MPP_ID), CP_UA0_TXD(MPP_ID);
-		marvell,function = "uart0";
-	};
-};
-
-&uart0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_uart0_pins>;
-};
-
-
-/* GPIO */
-
-&cp0_gpio1 {
-	status = "okay";
-};
-
-&cp0_gpio2 {
-	status = "okay";
-};
-
-
-/* I2C0 (EEPROM) */
-
-&cp0_pinctrl {
-	cp0_i2c0_pins: cp0-i2c0-pins {
-		marvell,pins = CP_I2C0_SCK(MPP_ID), CP_I2C0_SDA(MPP_ID);
-		marvell,function = "i2c0";
-	};
-};
-
-&cp0_i2c0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c0_pins>;
-
-	vpd_cpu: eeprom@50 {
-		// AT24C256C-MAHL-T
-		compatible = "atmel,24c256";
-                reg = <0x50>;
-
-		infix,board = "cpu";
-		infix,trusted;
-	};
-};
-
-
-/* I2C1 (Mux) */
-
-&cp0_pinctrl {
-	cp0_i2c1_pins: cp0-i2c1-pins {
-		marvell,pins = CP_I2C1_SCK(MPP_ID), CP_I2C1_SDA(MPP_ID);
-		marvell,function = "i2c1";
-	};
-};
-
-&cp0_i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_i2c1_pins>;
-
-	i2cmux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-                #size-cells = <0>;
-                reg = <0x70>;
-
-		reset-gpios = I2C_RESETn(MPP_GPIO_REF);
-
-		i2c_sysmgmt: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		i2c_pwr: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		i2c_sw: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		i2c_sfp9: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		i2c_sfpa: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		i2c@5 {
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		i2c@6 {
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		i2c@7 {
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-
-/* System Management */
-
-&i2c_sysmgmt {
-	vpd_product: eeprom@b {
-		label = "vpd";
-                reg = <0x0b>;
-		compatible = "atmel,24c02";
-
-		infix,board = "product";
-
-		nvmem-layout {
-			compatible = "onie,tlv-layout";
-
-			base_mac: mac-address {
-				#nvmem-cell-cells = <1>;
-			};
-		};
-	};
-};
-
-/* AP SDHCI (eMMC) */
-
-&ap_sdhci0 {
-	status = "okay";
-	pinctrl-names = "default";
-	/* pinctrl-0 = <&ap_emmc_pins>; No pinctrl in Linux? */
-	bus-width = <8>;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-};
-
-
-/* SPI1 (Boot FLASH) */
-
-&cp0_pinctrl {
-	cp0_spi1_pins: cp0-spi-pins-0 {
-		marvell,pins = \
-			CP_SPI1_MISO(MPP_ID), CP_SPI1_CS0(MPP_ID), \
-			CP_SPI1_MOSI(MPP_ID), CP_SPI1_SCK(MPP_ID);
-		marvell,function = "spi1";
-	};
-};
-
-&cp0_spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_spi1_pins>;
-
-	/* Boot flash */
-	spi-flash@0 {
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		compatible = "jedec,spi-nor", "spi-flash";
-		reg = <0x0>;
-		/* On-board MUX does not allow higher frequencies */
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			boot0@0 {
-				label = "boot0";
-				reg = <0x0 0x200000>;
-			};
-
-			boot1@200000 {
-				label = "boot1";
-				reg = <0x200000 0x200000>;
-			};
-		};
-	};
-};
-
-
-/* USB1 */
-
-/ {
-	cp0_usb3_0_phy1: cp0_usb3_phy {
-		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_cp0_usb3_vbus1>;
-	};
-
-	reg_cp0_usb3_vbus1: reg_cp0_usb3_vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "cp0-xhci1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		gpio = USB1_VBUS_ENABLE(MPP_GPIO_REF);
-	};
-};
-
-&cp0_utmi {
-	status = "okay";
-};
-
-&cp0_utmi1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cp0_usb3_1 {
-	status = "okay";
-	usb-phy = <&cp0_usb3_0_phy1>;
-	phys = <&cp0_utmi1>, <&cp0_comphy3 1>;
-	phy-names = "usb", "usb3";
-	dr_mode = "host";
-};
-
-
-
-
-/* ETH0 (DSA connection to switch) */
-
-&cp0_crypto {
-	status = "okay";
-};
-
-&cp0_ethernet {
-	status = "okay";
-};
-
-&cp0_eth0 {
-	status = "okay";
-	phy-mode = "10gbase-r";
-	phys = <&cp0_comphy4 0>;
-	managed = "in-band-status";
-
-	nvmem-cells = <&base_mac 0>;
-	nvmem-cell-names = "mac-address";
-};
-
-
-/* MDIO (Switch) */
-
-&cp0_pinctrl {
-	cp0_mdio_pins: cp0-mdio-pins-0 {
-		marvell,pins = CP_SMI_MDIO(MPP_ID), CP_SMI_MDC(MPP_ID);
-		marvell,function = "ge";
-	};
-};
-
-&cp0_mdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_mdio_pins>;
-
-	sw: switch@0 {
-		compatible = "marvell,mv88e6190";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		reset-gpios = SW_RESETn(MPP_GPIO_REF);
-
-		interrupts-extended = SW_INTn(MPP_IRQ_REF);
-		interrupt-controller;
-
-		dsa,member = <0 0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0x0>;
-				label = "cpu";
-				ethernet = <&cp0_eth0>;
-				phy-mode = "10gbase-r";
-				fixed-link {
-					speed = <10000>;
-					full-duplex;
-				};
-			};
-
-#define SWP_COMMON(_n, _label, _mac_offs, _phymode, _phy) \
-				reg = <0x ## _n>; \
-				label = _label; \
-				phy-mode = _phymode; \
-				phy-handle = <&_phy>; \
-				\
-				nvmem-cells = <&base_mac _mac_offs>; \
-				nvmem-cell-names = "mac-address"
-
-#define XSWP(_n, _label, _mac_offs, _phy) \
-			port@_n { \
-				SWP_COMMON(_n, _label, _mac_offs, "usxgmii", _phy); \
-				managed = "in-band-status"; \
-			}
-
-#define GSWP(_n, _label, _mac_offs, _phy) \
-			port@_n { \
-				SWP_COMMON(_n, _label, _mac_offs, "gmii", _phy); \
-				\
-				leds { \
-					#address-cells = <1>; \
-					#size-cells = <0>; \
-					\
-					led@0 { \
-						reg = <0>; \
-						function = "tp"; \
-						color = <LED_COLOR_ID_GREEN>; \
-						default-state = "keep"; \
-					}; \
-					led@1 { \
-						reg = <1>; \
-						function = "tp"; \
-						color = <LED_COLOR_ID_YELLOW>; \
-						default-state = "off"; \
-					}; \
-				}; \
-			}
-
-			XSWP(9,  "x1",  1,  xphy9);
-			XSWP(a,  "x2",  2,  xphya);
-
-			GSWP(8,  "x3",  3, swphy8);
-			GSWP(7,  "x4",  4, swphy7);
-			GSWP(6,  "x5",  5, swphy6);
-			GSWP(5,  "x6",  6, swphy5);
-			GSWP(4,  "x7",  7, swphy4);
-			GSWP(3,  "x8",  8, swphy3);
-			GSWP(2,  "x9",  9, swphy2);
-			GSWP(1, "x10", 10, swphy1);
-#undef GSWP
-#undef XSWP
-#undef SWP_COMMON
-		};
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-#define SWPHY(_n) \
-			ethernet-phy@_n { \
-				compatible = "ethernet-phy-ieee802.3-c22"; \
-				reg = <_n>; \
-				eee-broken-100tx; \
-				eee-broken-1000t; \
-			}
-
-			swphy1: SWPHY(1);
-			swphy2: SWPHY(2);
-			swphy3: SWPHY(3);
-			swphy4: SWPHY(4);
-			swphy5: SWPHY(5);
-			swphy6: SWPHY(6);
-			swphy7: SWPHY(7);
-			swphy8: SWPHY(8);
-#undef SWPHY
-		};
-	};
-};
-
-
-/* XMDIO (88X3310P 10G PHYs) */
-
-&cp0_pinctrl {
-	cp0_xmdio_pins: cp0-xmdio-pins-0 {
-		marvell,pins = CP_XSMI_MDIO(MPP_ID), CP_XSMI_MDC(MPP_ID);
-		marvell,function = "xg";
-	};
-};
-
-&ETH9_RESETn(MPP_GPIO_CHIP) {
-	xphy9-reset-hog {
-		gpio-hog;
-		gpios = ETH9_RESETn(MPP_GPIO_REF_NO_CHIP);
-		output-low;
-		line-name = "x1-phy-reset";
-	};
-};
-
-&ETH10_RESETn(MPP_GPIO_CHIP) {
-	xphya-reset-hog {
-		gpio-hog;
-		gpios = ETH10_RESETn(MPP_GPIO_REF_NO_CHIP);
-		output-low;
-		line-name = "x2-phy-reset";
-	};
-};
-
-&cp0_xmdio {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_xmdio_pins>;
-
-	/* 88X3310 specifices 35ns minimum MDC period (28.57 MHz). */
-	clock-frequency = <28571428>;
-
-#define XPHY(_n, _sfp) \
-	ethernet-phy@_n { \
-		compatible = "ethernet-phy-ieee802.3-c45"; \
-		reg = <_n>; \
-		sfp = <&_sfp>; \
-		\
-		leds { \
-			#address-cells = <1>; \
-			#size-cells = <0>; \
-			\
-			led@0 { \
-				reg = <0>; \
-				function = "tp"; \
-				color = <LED_COLOR_ID_YELLOW>; \
-				default-state = "off"; \
-				\
-				marvell,media = "copper"; \
-				marvell,polarity = "active-high"; \
-			}; \
-			led@1 { \
-				reg = <1>; \
-				function = "tp"; \
-				color = <LED_COLOR_ID_GREEN>; \
-				default-state = "keep"; \
-				\
-				marvell,media = "copper"; \
-				marvell,polarity = "active-high"; \
-			}; \
-			\
-			led@2 { \
-				reg = <2>; \
-				function = "sfp"; \
-				color = <LED_COLOR_ID_YELLOW>; \
-				default-state = "off"; \
-				\
-				marvell,media = "fiber"; \
-				marvell,polarity = "active-high"; \
-			}; \
-			led@3 { \
-				reg = <3>; \
-				function = "sfp"; \
-				color = <LED_COLOR_ID_GREEN>; \
-				default-state = "keep"; \
-				\
-				marvell,media = "fiber"; \
-				marvell,polarity = "active-high"; \
-			}; \
-		}; \
-	}
-
-	xphy9: XPHY(4, sfp9);
-	xphya: XPHY(5, sfpa);
-#undef XPHY
-};
-
-/ {
-	sfp9: sfp@9 {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfp9>;
-		mod-def0-gpios = SFP9_MOD_ABS(MPP_GPIO_REF);
-		los-gpios = SFP9_RX_LOS(MPP_GPIO_REF);
-		tx-disable-gpios = SFP9_TX_DISABLE(MPP_GPIO_REF);
-		tx-fault-gpios = SFP9_TX_FAULT(MPP_GPIO_REF);
-		rate-select0-gpios = SFP9_RS0(MPP_GPIO_REF);
-		rate-select1-gpios = SFP9_RS1(MPP_GPIO_REF);
-		maximum-power-milliwatt = <3000>;
-	};
-
-	sfpa: sfp@a {
-		compatible = "sff,sfp";
-		i2c-bus = <&i2c_sfpa>;
-		mod-def0-gpios = SFP10_MOD_ABS(MPP_GPIO_REF);
-		los-gpios = SFP10_RX_LOS(MPP_GPIO_REF);
-		tx-disable-gpios = SFP10_TX_DISABLE(MPP_GPIO_REF);
-		tx-fault-gpios = SFP10_TX_FAULT(MPP_GPIO_REF);
-		rate-select0-gpios = SFP10_RS0(MPP_GPIO_REF);
-		rate-select1-gpios = SFP10_RS1(MPP_GPIO_REF);
-		maximum-power-milliwatt = <3000>;
-	};
-};
-
-
-/* Power Board */
-
-&cp0_pinctrl {
-	cp0_pwr_gpio_pins: cp0-pwr-gpio-0 {
-		marvell,pins = I2C_IRQ(MPP_ID);
-		marvell,function = "gpio";
-	};
-};
-
-&i2c_pwr {
-	// Shared IRQ on I2C_IRQ
-	pinctrl-names = "default";
-	pinctrl-0 = <&cp0_pwr_gpio_pins>;
-
-	// 0x26  U13 PCF8574        GPIO I/O
-	gpio_pwr1: gpio@26 {
-		compatible = "nxp,pcf8574a";
-		#gpio-cells = <2>;
-		gpio-controller;
-                #interrupt-cells = <2>;
-                interrupt-controller;
-		interrupts-extended = I2C_IRQ(MPP_IRQ_REF);
-		reg = <0x26>;
-#define GPIO_PWR1_UNUSED0	gpio_pwr1 0 GPIO_ACTIVE_HIGH
-#define GPIO_PWR1_UNUSED1	gpio_pwr1 1 GPIO_ACTIVE_HIGH
-#define GPIO_POE_PGOOD		gpio_pwr1 2 GPIO_ACTIVE_HIGH
-#define GPIO_RESET_BUTTON	gpio_pwr1 3 GPIO_ACTIVE_LOW
-#define GPIO_VIN1_PGOOD		gpio_pwr1 4 GPIO_ACTIVE_LOW
-#define GPIO_LED_VIN2_ALERT	gpio_pwr1 5 GPIO_ACTIVE_LOW
-#define GPIO_VIN2_PGOOD		gpio_pwr1 6 GPIO_ACTIVE_LOW
-#define GPIO_LED_VIN1_ALERT	gpio_pwr1 7 GPIO_ACTIVE_LOW
-	};
-
-	//0x27  U3  PCF8574        GPIO LED
-	gpio_pwr2: gpio@27 {
-		compatible = "nxp,pcf8574a";
-		#gpio-cells = <2>;
-		gpio-controller;
-                #interrupt-cells = <2>;
-                interrupt-controller;
-		interrupts-extended = I2C_IRQ(MPP_IRQ_REF);
-		reg = <0x27>;
-#define GPIO_LED2G		gpio_pwr2 0 GPIO_ACTIVE_LOW
-#define GPIO_LED2R		gpio_pwr2 1 GPIO_ACTIVE_LOW
-#define GPIO_LED1G		gpio_pwr2 2 GPIO_ACTIVE_LOW
-#define GPIO_LED1R		gpio_pwr2 3 GPIO_ACTIVE_LOW
-#define GPIO_LED4G		gpio_pwr2 4 GPIO_ACTIVE_LOW
-#define GPIO_LED4R		gpio_pwr2 5 GPIO_ACTIVE_LOW
-#define GPIO_LED3G		gpio_pwr2 6 GPIO_ACTIVE_LOW
-#define GPIO_LED3R		gpio_pwr2 7 GPIO_ACTIVE_LOW
-	};
-
-	//0x28* U5  TPS23861PWR    PoE Controller
-	//0x30  U5  TPS23861PWR    PoE Controller broadcast
-
-	//0x50  U15 AT24C256C      EEPROM
-	vpd_power: eeprom@50 {
-		// AT24C256C-MAHL-T
-		compatible = "atmel,24c256";
-                reg = <0x50>;
-
-		infix,board = "power";
-	};
-};
-
-/* Reset button */
-/ {
-	gpio-keys {
-		compatible = "gpio-keys";
-		up {
-			label = "factory-reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&GPIO_RESET_BUTTON>;
-		};
-	};
-};
-
-/* System LEDs */
-/ {
-	power-a {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&GPIO_VIN1_PGOOD>;
-	};
-
-	power-b {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&GPIO_VIN2_PGOOD>;
-	};
-
-	leds: leds {
-		compatible = "gpio-leds";
-
-		led-statg {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&GPIO_LED1G>;
-		};
-
-		led-statr {
-			function = LED_FUNCTION_STATUS;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED1R>;
-		};
-
-		led-faultg {
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&GPIO_LED2G>;
-		};
-
-		led-faultr {
-			function = LED_FUNCTION_FAULT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED2R>;
-		};
-
-		led-lang {
-			function = LED_FUNCTION_LAN;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&GPIO_LED3G>;
-		};
-
-		led-lanr {
-			function = LED_FUNCTION_LAN;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED3R>;
-		};
-
-		led-bootg {
-			function = LED_FUNCTION_BOOT;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&GPIO_LED4G>;
-		};
-
-		led-bootr {
-			function = LED_FUNCTION_BOOT;
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED4R>;
-			default-state = "on";
-			linux,default-trigger = "timer";
-		};
-
-		led-vin1-alert {
-			function = "power-a";
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED_VIN1_ALERT>;
-		};
-
-		led-vin2-alert {
-			function = "power-b";
-			color = <LED_COLOR_ID_RED>;
-			gpios = <&GPIO_LED_VIN2_ALERT>;
-		};
-	};
-};
-
-/* Watchdog */
-
-&cp0_pinctrl {
-	watchdog_pins: watchdog-pins {
-		marvell,pins = WDT_TICKLE(MPP_ID);
-		marvell,function = "gpio";
-	};
-};
-
-/ {
-        sysmgmt-watchdog {
-                pinctrl-names = "default";
-                pinctrl-0 = <&watchdog_pins>;
-                compatible = "linux,wdt-gpio";
-                gpios = WDT_TICKLE(MPP_GPIO_REF);
-                always-running;
-                hw_algo = "toggle";
-                hw_margin_ms = <20000>; /* toggle period must be below 1 minute */
-        };
-};

board/aarch64/alder-alder/dts/marvell/cn9130-patched.dtsi

@@ -1,12 +0,0 @@
-#include <arm64/marvell/cn9130.dtsi>
-
-&cp0_syscon0 {
-	cp0_pinctrl: pinctrl {
-		/* For some reason, this is missing from cn9130.dtsi */
-		compatible = "marvell,cp115-standalone-pinctrl";
-	};
-};
-
-&cp0_xmdio {
-	clock-names = "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-};

board/aarch64/bananapi-bpi-r3/Config.in

@@ -1,11 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R3
-	bool "Banana Pi R3"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7986
-	select BR2_PACKAGE_LINUX_FIRMWARE_AIROHA_EN8811H
-	select SDCARD_AUX
-	help
-	  Build Banana PI R3 support

board/aarch64/bananapi-bpi-r3/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/bananapi-bpi-r3/README.md

@@ -1,273 +0,0 @@
-# Banana Pi BPI-R3 / BPI-R3 Mini
-
-<img src="bananapi-bpi-r3.webp" alt="The board" width=800 padding=10>
-
-## Overview
-
-The Banana Pi BPI-R3 and BPI-R3 Mini are high-performance networking
-boards with full Infix support for all enabled features including
-Ethernet, WiFi, and SFP interfaces.
-
-Both boards share the same SoC and most peripherals.  The key
-differences are:
-
-| Feature         | BPI-R3             | BPI-R3 Mini             |
-|-----------------|--------------------|-------------------------|
-| Ethernet switch | Yes (4x LAN + WAN) | No (WAN/LAN ports only) |
-| SD card slot    | Yes                | No                      |
-
-### Hardware Features
-
-- MediaTek MT7986 ARM Cortex-A53 quad-core processor @ 2.0 GHz
-- 2 GB DDR4 RAM
-- 8 GB eMMC storage
-- microSD card slot (BPI-R3 only)
-- 5x Gigabit Ethernet ports with switch core (BPI-R3 only)
-- 2x SFP cages for fiber connectivity (1G/2.5G) (BPI-R3 only)
-- Dual-band WiFi (2.4 GHz + 5 GHz)
-- USB 3.0 port
-- Mini PCIe slot
-
-### Default Network Configuration
-
-Infix comes preconfigured with:
-
-- **LAN ports** (lan1-lan4): Bridged for internal networking (BPI-R3 only)
-- **WAN port**: DHCP client enabled for internet connectivity
-- **SFP ports** (sfp1, sfp2): Available for configuration (BPI-R3 only)
-- **WiFi interfaces** (wifi0, wifi1): Available for configuration
-
-## Getting Started
-
-### BPI-R3: Quick Start with SD Card
-
-The easiest way to get started with the BPI-R3 is using an SD card:
-
-> [!NOTE]
-> SD card boot works but we have observed stability issues. For production
-> use or long-term reliability, we recommend installing to eMMC (see below).
-
-1. **Download the SD card image:** [infix-bpi-r3-sdcard.img][2]
-2. **Flash the image to an SD card:** see [this guide][0]
-3. **Set boot switches:**
-   - Set DIP switches to **0000** (SD card boot mode)
-   - Switch positions are on the underside of the board near the SD slot
-4. **Boot the board:**
-   - Insert the SD card
-   - Connect power
-   - Connect to LAN port or console (115200 8N1)
-   - Default login: `admin` / `admin`
-
-### BPI-R3 Mini: Getting Started
-
-The BPI-R3 Mini does not have an SD card slot, so you must install
-directly to eMMC.  See [Installing to eMMC — BPI-R3
-Mini](#bpi-r3-mini) below.
-
-### Boot Switch Reference
-
-The BPI-R3 has a 4-position DIP switch that controls boot media:
-
-<img align="right" src="bootstrap-switch.webp" alt="DIP switches" width=200 padding=10>
-
-| Position | Mode        | Description                           |
-|----------|-------------|---------------------------------------|
-| 0000     | SD card     | Boot from microSD card                |
-| 0110     | eMMC        | Boot from internal eMMC (recommended) |
-| 1010     | SPI NAND    | Boot from SPI NAND (advanced users)   |
-
-> [!NOTE]
-> Switch position is read from left to right: "0" = OFF, "1" = ON.
-> When the DIP switch is in the "UP" position it is OFF(0).
-
-## Installing to eMMC
-
-For production deployments or better performance, you can install Infix
-to the internal eMMC storage.
-
-> [!IMPORTANT]
-> While Infix boots on both SD card and eMMC on the BPI-R3, we have
-> observed stability issues with SD cards on this platform. **eMMC is
-> recommended** for reliable operation.
-
-### Prerequisites
-
-- FTDI USB-to-serial cable (3.3V) for console access
-- USB flash drive (FAT32 formatted)
-- microSD card with Infix, for initial boot (BPI-R3 only)
-- Downloaded files (see below)
-
-### Required Files
-
-Download and place these files on a FAT32-formatted USB drive:
-
-1. **Infix eMMC image:**
-   - [infix-bpi-r3-emmc.img][3] (Complete system image)
-2. **eMMC bootloader** (extracted from):
-   - [bpi-r3-emmc-boot-2025.01-latest.tar.gz][4]
-   - Extract `bl2.img` from the tarball to your USB drive
-3. **Intermediate NAND bootloader** (BPI-R3 only, from Frank-W's U-Boot):
-   - [bpi-r3_spim-nand_bl2.img][5] (BL2 loader)
-   - [bpi-r3_spim-nand_fip.bin][6] (FIP image)
-
-> [!WARNING]
-> The following process involves multiple boot mode changes.  Take your
-> time and verify each step carefully.
-
-### BPI-R3
-
-#### Step 1: Boot from SD card
-
-1. Set boot switches to **0000** (SD card mode)
-2. Insert SD card with Infix
-3. Power on and break into U-Boot (press Ctrl-C during boot)
-
-#### Step 2: Flash intermediate NAND bootloader
-
-This step installs a temporary bootloader to NAND that will help us
-flash the eMMC. From the U-Boot prompt:
-
-```
-usb start
-mtd erase spi-nand0
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_bl2.img
-mtd write spi-nand0 0x50000000 0x0 0x100000
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_fip.bin
-mtd write spi-nand0 0x50000000 0x380000 0x200000
-```
-
-#### Step 3: Boot from NAND
-
-1. Power off the board
-2. Set boot switches to **1010** (NAND mode)
-3. Power on - you should boot into U-Boot again
-
-#### Step 4: Write Infix image to eMMC
-
-From the U-Boot prompt:
-
-```
-usb start
-fatload usb 0:1 0x50000000 infix-bpi-r3-emmc.img
-setexpr blocks ${filesize} / 0x200
-mmc write 0x50000000 0x0 ${blocks}
-```
-
-This writes the complete Infix system (partitions, rootfs, etc.) to eMMC.
-
-#### Step 5: Configure eMMC boot
-
-Now configure the eMMC boot partition and write the bootloader:
-
-```
-mmc partconf 0 1 1 1
-mmc erase 0x0 0x400
-fatload usb 0:1 0x50000000 bl2.img
-mmc write 0x50000000 0x0 0x400
-mmc partconf 0 1 1 0
-```
-
-#### Step 6: Boot from eMMC
-
-1. Power off the board
-2. Set boot switches to **0110** (eMMC mode)
-3. Remove SD card (optional, but recommended to verify eMMC boot)
-4. Power on
-
-Your BPI-R3 should now boot Infix from internal eMMC storage!
-
-### BPI-R3 Mini
-
-The BPI-R3 Mini does not have an SD card slot, so you have to go
-through the factory-installed Linux (OpenWRT) to flash the Infix
-bootloader and OS to eMMC.
-
-#### Step 1: Boot from NAND (factory default)
-
-<img src="r3mini_nandboot2.png" alt="BPI-R3 Mini NAND boot switch position" width=400>
-
-1. Ensure boot switches are set to NAND mode (factory default)
-2. Place `infix-bpi-r3-emmc.img` and `bl2.img` on a USB drive
-3. Power on and boot into Linux
-4. Mount the USB drive to `/mnt`
-
-#### Step 2: Flash Infix to eMMC
-
-From the Linux shell:
-
-```
-echo 0 > /proc/sys/kernel/printk
-dd if=/mnt/infix-bpi-r3-emmc.img of=/dev/mmcblk0
-echo 0 > /sys/block/mmcblk0boot0/force_ro
-dd if=/mnt/bl2.img of=/dev/mmcblk0boot0
-sync
-```
-
-#### Step 3: Boot from eMMC
-
-<img src="r3mini_emmcboot.png" alt="BPI-R3 Mini eMMC boot switch position" width=400>
-
-1. Power off the board
-2. Set boot switches to eMMC mode (see image above)
-3. Power on
-
-## Troubleshooting
-
-### Board won't boot
-
-- Verify boot switch positions (check twice!)
-- Ensure power supply provides adequate current (12V/2A recommended)
-- Try booting from SD card with switches at **0000** (BPI-R3 only)
-
-### Can't break into U-Boot
-
-- Ensure serial console is connected properly (115200 8N1, 3.3V)
-- Press Ctrl-C immediately when you see boot messages
-- Try power cycling and pressing Ctrl-C repeatedly
-
-### eMMC boot fails after installation
-
-- Boot from NAND (**1010**) and verify eMMC image was written
-- Check USB drive contents - ensure all files are present
-- Re-run the eMMC boot configuration step
-
-### Reverting to SD card (BPI-R3 only)
-
-Simply set boot switches back to **0000** and boot from SD card. The
-eMMC installation does not affect SD card functionality.
-
-## Additional Resources
-
-- [Infix Documentation][1]
-- [Official BPI-R3 Wiki][7]
-- [Release Downloads][8]
-
-## Building Custom Images
-
-See the main Infix documentation for building from source. To build both
-SD card and eMMC images locally:
-
-```bash
-# Build bootloaders for both SD and eMMC
-make x-bpi-r3-sd-boot
-make x-bpi-r3-emmc-boot
-
-# Build main system
-make aarch64
-
-# Create SD card image
-./utils/mkimage.sh -od bananapi-bpi-r3
-
-# Create eMMC image
-./utils/mkimage.sh -odt emmc bananapi-bpi-r3
-```
-
-[0]: https://kernelkit.org/posts/flashing-sdcard/
-[1]: https://kernelkit.org/infix/latest/
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-sdcard.img
-[3]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-emmc.img
-[4]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r3-emmc-boot-2025.01-latest.tar.gz
-[5]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_bl2.img
-[6]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_fip.bin
-[7]: https://wiki.banana-pi.org/Banana_Pi_BPI-R3
-[8]: https://github.com/kernelkit/infix/releases/tag/latest-boot

board/aarch64/bananapi-bpi-r3/bananapi-bpi-r3.mk

@@ -1,37 +0,0 @@
-define BANANAPI_BPI_R3_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-	$(call KCONFIG_SET_OPT,CONFIG_AIR_EN8811H_PHY,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_HSDMA)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MT798X_WMAC)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_SOC_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_MT6380,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/bananapi-bpi-r3/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += mediatek/mt7986a-bananapi-bpi-r3-sd.dtb mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb mediatek/mt7986a-bananapi-bpi-r3-mini.dtb

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtsi

@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-        bus-width = <8>;
-        max-frequency = <200000000>;
-        cap-mmc-highspeed;
-        mmc-hs200-1_8v;
-        mmc-hs400-1_8v;
-        hs400-ds-delay = <0x14014>;
-        non-removable;
-        no-sd;
-        no-sdio;
-        status = "okay";
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts

@@ -1,12 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"
-
-&phy0 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-&phy1 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dtsi

@@ -1,2 +0,0 @@
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-sd.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtsi

@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-	bus-width = <4>;
-	max-frequency = <52000000>;
-	cap-sd-highspeed;
-	status = "okay";
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi

@@ -1,57 +0,0 @@
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb>;
-			usb-port-names = "USB";
-		};
-	};
-};
-
-&cpu_thermal {
-	/delete-node/ trips;
-	/delete-node/ cooling-maps;
-	trips {
-		cpu_trip_active_cool: cpu-trip-active-cool {
-			temperature = <40000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_low: cpu-trip-active-low {
-			temperature = <45000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_med: cpu-trip-active-med {
-			temperature = <60000>;   // 60°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_hot: cpu-trip-hot {
-			temperature = <80000>;   // 80°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "hot";
-		};
-		cpu_trip_critical: cpu-trip-critical {
-			temperature = <90000>;   // 90°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map-cpu-40deg {
-			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_active_cool>;
-		};
-		map-cpu-45deg {
-			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
-		};
-		map-cpu-60deg {
-			cooling-device = <&fan 2 2>;
-			trip = <&cpu_trip_active_med>;
-		};
-	};
-};

board/aarch64/bananapi-bpi-r3/genimage.cfg.in

@@ -1,87 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r3-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-#		partition-type = 0x83  # Linux filesystem
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-	partition en8811h_fw {
-		size = 10M
-		image = "en8811h-fw.bin"
-	}
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/factory-config.cfg

@@ -1,479 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-	"infix-hardware:wifi-radio": {
-	  "country-code": "DE",
-	  "band": "2.4GHz",
-	  "channel": "auto"
-	 }
-     },
-     {
-	"name": "radio1",
-	"class": "infix-hardware:wifi",
-	"infix-hardware:wifi-radio": {
-	  "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-      }
-    }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan4",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "sfp1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "sfp2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-	"infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-       "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/product/interface-quirks.json

@@ -1,11 +0,0 @@
-{
-    "sfp1": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    },
-    "sfp2": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    }
-
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/udev/rules.d/90-bpi-r3-rename-eth1.rules

@@ -1 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp1"

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/factory-config.cfg

@@ -1,445 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-	"infix-hardware:wifi-radio": {
-	  "country-code": "DE",
-	  "band": "2.4GHz",
-	  "channel": "auto"
-	 }
-     },
-     {
-	"name": "radio1",
-	"class": "infix-hardware:wifi",
-	"infix-hardware:wifi-radio": {
-	  "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-      }
-    }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-	"infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-       "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/udev/rules.d/90-bpi-r3-mini-rename-ethernet.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth0", NAME="lan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="wan"

board/aarch64/bananapi-bpi-r3/uboot/emmc-extras.config

@@ -1,3 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-emmc-env.dtsi"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_DEVICE=emmc DRAM_USE_DDR4=1 USE_MKIMAGE=1  MKIMAGE=$(HOST_DIR)/bin/mkimage"
-CONFIG_SUPPORT_EMMC_BOOT=y

board/aarch64/bananapi-bpi-r3/uboot/extras.config

@@ -1,45 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_OF_LIST="mt7986a-bpi-r3-sd mt7986a-bpi-r3-emmc mt7986a-bpi-r3-mini"
-
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
-
-CONFIG_MTK_SPIM=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTK_SPIM=y
-CONFIG_MTK_SNOR=y
-
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_PHY_ETHERNET_ID=y
-
-CONFIG_PHY_AIROHA=y
-CONFIG_PHY_AIROHA_EN8811H=y
-CONFIG_PHY_AIROHA_FW_IN_MMC=y
-
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_MDIO=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DM=y

board/aarch64/bananapi-bpi-r3/uboot/mt7986-emmc-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-env.dtsi

@@ -1,29 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       /* After the MMC driver has enabled bus power,
-                        * the controller seems to sometimes detect a
-                        * card removal state , which causes it to
-                        * disable power again. This hack re-enables the
-                        * bus power in those cases.
-                        */
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-		en8811h_fw_part = "0#en8811h_fw";
-		en8811h_fw_dm_dir = "EthMD32.dm.bin";
-		en8811h_fw_dsp_dir = "EthMD32.DSP.bin";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-                       ixbtn-factory = "echo \"No button available, use bootmenu\"";
-               };
-       };
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-sd-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-sd.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/sd-extras.config

@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-sd-env.dtsi"

board/aarch64/board.mk

@@ -1,4 +1,3 @@
-include $(sort $(wildcard $(BR2_EXTERNAL_INFIX_PATH)/board/aarch64/*/*.mk))
 
 .PHONY: board-enable-qemu-uboot
 board-enable-qemu-uboot:
@@ -20,6 +19,13 @@ board-enable-qemu-uboot:
 			'$$(BR2_EXTERNAL_INFIX_PATH)/board/common/uboot/extras.config' \
 		--enable TARGET_UBOOT_FORMAT_DTB
 
+.PHONY: board-enable-sparx-fit
+board-enable-sparx-fit:
+	@$(call IXMSG,"Enabling SparX-5i compatible FIT options")
+	@BR2_PREFIX= ./utils/config --file $(BR2_CONFIG) \
+	 	--enable FIT_IMAGE \
+	 	--set-str FIT_KERNEL_LOAD_ADDR "0x7 0x00000000"
+
 .PHONY: board-sparx-flash-uboot
 board-sparx-flash-uboot: $(BINARIES_DIR)/u-boot.bin
 	@grep -q 'BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mscc_fireant_pcb135_emmc"' $(BR2_CONFIG) || \

board/aarch64/dts/microchip/sparx5_pcb135_emmc_no_psci.dts

@@ -5,7 +5,7 @@
  */
 
 /dts-v1/;
-#include <arm64/microchip/sparx5_pcb135_emmc.dts>
+#include "microchip/sparx5_pcb135_emmc.dts"
 
 &cpu0 {
 	enable-method = "spin-table";

board/aarch64/freescale-imx8mp-evk/Config.in

@@ -1,6 +0,0 @@
-config BR2_PACKAGE_FREESCALE_IMX8MP_EVK
-	bool "NXP i.MX8MP EVK"
-	depends on BR2_aarch64
-	help
-	  NXP i.MX8MP EVK
-

board/aarch64/freescale-imx8mp-evk/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2024 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/freescale-imx8mp-evk/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += freescale/imx8mp-evk.dtb

board/aarch64/freescale-imx8mp-evk/dts/freescale/imx8mp-evk.dts

@@ -1,113 +0,0 @@
-#include <arm64/freescale/imx8mp-evk.dts>
-#include <dt-bindings/usb/pd.h>
-&usb3_phy0 {
-
-	status = "okay";
-};
-&iomuxc {
-	pinctrl_typec_mux: typec1muxgrp {
-		fsl,pins = <
-		MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20	0x16
-		>;
-	};
-	pinctrl_typec: typec1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x1c4
-		>;
-	};
-};
-
-&i2c2 {
-	ptn5110: tcpc@50 {
-		compatible = "nxp,ptn5110";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_typec>;
-		reg = <0x50>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <19 8>;
-
-		port {
-			typec_dr_sw: endpoint {
-				remote-endpoint = <&usb3_drd_sw>;
-			};
-		};
-
-		usb_con: connector {
-			compatible = "usb-c-connector";
-			label = "USB-C";
-			power-role = "dual";
-			data-role = "dual";
-			try-power-role = "sink";
-			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
-			PDO_VAR(5000, 20000, 3000)>;
-			op-sink-microwatt = <15000000>;
-			self-powered;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@1 {
-					reg = <1>;
-					typec_con_ss: endpoint {
-						remote-endpoint = <&usb3_data_ss>;
-					};
-				};
-			};
-		};
-	};
-};
-&usb3_phy0 {
-	fsl,phy-tx-vref-tune = <0xe>;
-	fsl,phy-tx-preemp-amp-tune = <3>;
-	fsl,phy-tx-vboost-level = <5>;
-	fsl,phy-comp-dis-tune = <7>;
-	fsl,pcs-tx-deemph-3p5db = <0x21>;
-	fsl,phy-pcs-tx-swing-full = <0x7f>;
-	status = "okay";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb_dwc3_0 {
-	dr_mode = "otg";
-	hnp-disable;
-	srp-disable;
-	adp-disable;
-	usb-role-switch;
-	role-switch-default-mode = "none";
-	snps,dis-u1-entry-quirk;
-	snps,dis-u2-entry-quirk;
-	status = "okay";
-
-	port {
-		usb3_drd_sw: endpoint {
-			remote-endpoint = <&typec_dr_sw>;
-		};
-	};
-};
-
-/ {
-	gpio-sbu-mux {
-		compatible = "gpio-sbu-mux";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_typec_mux>;
-		switch-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-		orientation-switch;
-
-		port {
-			usb3_data_ss: endpoint {
-				remote-endpoint = <&typec_con_ss>;
-			};
-		};
-	};
-        chosen {
-                infix {
-                        /* "admin" */
-                        factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-                };
-        };
-};

board/aarch64/freescale-imx8mp-evk/freescale-imx8mp-evk.mk

@@ -1,46 +0,0 @@
-define FREESCALE_IMX8MP_EVK_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_NXP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MXC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_FEC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_STMICRO)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_ETH)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DWMAC_IMX8)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_IMX)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_IMX_CONSOLE)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_I2C_IMX)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SPI_IMX)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_IMX8MP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_GPIO_MXC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_IMX2_WDT)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_SDHCI_OF_ESDHC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_SDHCI_ESDHC_IMX)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CLK_IMX8MP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NVMEM_IMX_OCOTP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX8MP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-# For X
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_ETNAVIV)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX8MP_HDMI_PVI)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_IMX_LCDIF)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MOUSE)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MOUSEDEV)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_HID_GENERIC)
-
-# For USB
-	$(call KCONFIG_DISABLE_OPT,CONFIG_USB)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3)
-	$(call KCONFIG_DISABLE_OPT,CONFIG_USB_DWC3_GADGET)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3_HOST)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARM_IMX_BUS_DEVFREQ)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_TYPEC_TCPCI)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_TYPEC_SWITCH_GPIO)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/freescale-imx8mp-evk/rootfs/usr/share/product/fsl,imx8mp-evk/etc/product/interface-quirks.json

@@ -1,8 +0,0 @@
-{
-    "eth0": {
-	"phy-detached-when-down": true
-    },
-    "eth1": {
-	"broken-mqprio": true
-    }
-}

board/aarch64/friendlyarm-nanopi-r2s/Config.in

@@ -1,10 +0,0 @@
-config BR2_PACKAGE_FRIENDLYARM_NANOPI_R2S
-	bool "FriendlyElec NanoPi R2S"
-	depends on BR2_aarch64
-	select SDCARD_AUX
-	select BR2_PACKAGE_INPUT_EVENT_DAEMON
-	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_815X
-	select BR2_PACKAGE_INPUT_EVENT_DAEMON
-	help
-	  FriendlyElec NanoPi R2S is a compact router board based on
-	  the Rockchip RK3328 SoC with dual Gigabit Ethernet ports.

board/aarch64/friendlyarm-nanopi-r2s/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/friendlyarm-nanopi-r2s/README.md

@@ -1,172 +0,0 @@
-FriendlyELC NanoPi R2S
-======================
-
-The [NanoPi R2S][1] is a very low-cost 64-bit ARM min router, powered by
-the Rockchip RK3328, quad-core Cortex-A53.
-
-The R2S does not have any onboard eMMC, so the only way to boot Infix on
-it is using and SD card.
-
-
-LEDs
-----
-
-The front system LEDs work as follows in Infix:
-
-| **Stage**      | **SYS** | **LAN** | **WAN** |
-|----------------|---------|---------|---------|
-| Power-on       | dimmed  | off     | off     |
-| Factory reset  | on      | on      | on      |
-| Linux loading  | on      | off     | off     |
-| System loading | 1 Hz    | off     | off     |
-| System up      | off     | on      | off     |
-| WAN address    | off     | on      | on      |
-| Locate         | 1 Hz    | 1 Hz    | 1 Hz    |
-| Fail safe      | 5 Hz    | off     | off     |
-| Panic          | 5 Hz    | 5 Hz    | 5 Hz    |
-
-Powering on the device the SYS LED is turned on faintly (dimmed).  It
-remains dimmed while U-Boot loads the kernel, and turns bright red when
-the kernel starts.  It remains steady on until the system has started
-the LED daemon, `iitod`, which sets it blinking at 1 Hz while the rest
-of the system starts up.  When the system has come up successfully, the
-SYS LED is turned off and the green LAN LED turns on.  The WAN LED will
-turn on (green) when the WAN interface is up and has an IP address.
-
-> Compared to the `x86_64` Qemu target, it takes a while to parse all
-> YANG models and load `startup-config`, but the whole process should
-> not take more than 60 seconds, and usually a lot less.
-
-If a "find my device" function exists, it will blink all LEDs at 1 Hz.
-
-If `startup-config` fails to load Ínfix reverts to `failure-config`,
-putting the device in fail safe (or fail secure) mode.  Indicated by
-the SYS LED blinking at 5 Hz instead of turning off.
-
-If Infix for some reason also fails to load `failure-config`, then all
-LEDs will blink at 5 Hz to clearly indicate something is very wrong.
-
-In all error cases the console shows the problem.
-
-
-Factory Reset
--------------
-
-The reset button on the side can be used not only to safely reboot the
-device, but can also be used to trigger a factory reset at power on.
-
-At power-on, keep the reset button pressed for 10 seconds.  The system
-LEDs (SYS, WAN, LAN) will all blink at 1 Hz, to help you count down the
-seconds.  When the 10 seconds have passed all LEDs are turned off before
-loading Linux.
-
-When Linux boots up it confirms the factory reset by lighting up the
-LEDs again, no blinking this time.  The LEDs stay on until all files and
-directories on read/writable partitions (`/cfg` and `/var`) have been
-safely erased.
-
-The system then continues loading, turning off all LEDs except SYS,
-which blinks calmly at 1 Hz as usual until the system has completed
-loading, this time with a `startup-config` freshly restored from the
-device's `factory-config`.
-
-
-How to Build
-------------
-
-```
-$ make r2s_defconfig
-$ make
-```
-
-Once the build has finished you will have `output/images/sdcard.img`
-which you can flash to an SD card.
-
-```
-$ sudo dd if=output/images/sdcard.img of=/dev/mmcblk0 bs=1M status=progress oflag=direct
-```
-
-> **WARNING:** ensure `/dev/mmcblk0` really is the correct device for
-> your SD card, and not used by the system!
-
-
-Booting the Board
------------------
-
- 1. Connect a TTL cable to three UART pins, GND is closest to the edge
- 2. Insert the flashed SD card
- 3. Power-up the board using an USB-C cable (ensure good power source!)
-
-Worth noting, unlike many other boards, the Rockchip family of chipsets
-runs the UART at 1500000 bps (1.5 Mbps) 8N1.
-
-
-Console Port
-------------
-
-Unlike many other boards, the NanoPi R2S console, and in fact all
-Rockchip family chipsets, runs at 1500000 bps (1.5 Mbps) 8N1. 
-
-
-Secure Boot
------------
-
-Like other Infix builds, the R2S enjoys secure boot.  Please note,
-however that the default signing keys are the public!
-
-Also, default builds allow modifying and saving the U-Boot environment
-(see below), which you may want to disable to secure the device.  The
-device also runs in *developer mode*, allowing full U-Boot shell access,
-which you may also want to disable in a full production setting.
-
-
-Caveat
-------
-
-Most (all?) of these boards do not have any Vital Product Data (VPD)
-EEPROM mounted.  This means they do not come with unique MAC addresses
-allocated to the two Ethernet ports.
-
-The bootloader (U-Boot) default environment for the board is usually
-what provides a default, the same default MAC addresses to Linux:
-
- - 4a:dc:d8:20:0d:84
- - 4a:dc:d8:20:0d:85
-
-This is important in case you want to run multiple R2S devices on the
-same LAN.  Meaning you either have to change the MAC address in the
-U-Boot environment (below), or use the `custom-phys-address` setting in
-Infix for the interface(s).
-
-Break into U-Boot using Ctrl-C at power-on, preferably when the text
-`Press Ctrl-C NOW to enter boot menu` is displayed.  Exit the menu to
-get to the prompt:
-
-```
-(r2s) printenv
-...
-eth1addr=4a:dc:d8:20:0d:84
-ethact=ethernet@ff540000
-ethaddr=4a:dc:d8:20:0d:85
-ethprime=eth0
-...
-```
-
-Here we change both addresses, using the *Locally Administered* bit:
-
-```
-(r2s) setenv eth1addr 02:00:c0:ff:ee:01
-(r2s) setenv ethaddr 02:00:c0:ff:ee:00
-(r2s) saveenv
-```
-
-Boot the system, log into Linux, and inspect the MAC addresses:
-
-```
-admin@infix-00-00-00:~$ ip -br l
-lo      UP     00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
-eth0    UP     02:00:c0:ff:ee:00 <BROADCAST,MULTICAST,UP,LOWER_UP>
-eth1    UP     02:00:c0:ff:ee:01 <BROADCAST,MULTICAST,UP,LOWER_UP>
-```
-
-[1]: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R2S

board/aarch64/friendlyarm-nanopi-r2s/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += rockchip/rk3328-nanopi-r2s.dtb

board/aarch64/friendlyarm-nanopi-r2s/dts/rockchip/infix.dtsi

@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common Infix OS defaults
- */
-
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-		};
-	};
-};

board/aarch64/friendlyarm-nanopi-r2s/dts/rockchip/rk3328-nanopi-r2s.dts

@@ -1,23 +0,0 @@
-#include <arm64/rockchip/rk3328-nanopi-r2s.dts>
-#include "infix.dtsi"
-
-&rtl8153 {
-	/*
-	 * Fix port number: device is on port 1, not port 2
-	 *
-	 * The kernel's usb_of_get_connect_type() function checks for child
-	 * nodes with a 'reg' property matching the physical port number to
-	 * determine if a USB port is "hard-wired" (internal) vs external.
-	 * With authorized_default=2, only hard-wired ports are automatically
-	 * authorized. The RTL8153 shows up as device 3-1 (hub 3, port 1), so
-	 * reg must be <1> for the kernel to mark it as USB_PORT_CONNECT_TYPE_HARD_WIRED
-	 * and authorize it automatically at boot.
-	 */
-	reg = <1>;
-};
-
-&{/chosen/infix} {
-	/* Expose only the external USB 2.0 port for user management */
-	usb-ports = <&usb_host0_ehci>;
-	usb-port-names = "USB";
-};

board/aarch64/friendlyarm-nanopi-r2s/friendlyarm-nanopi-r2s.mk

@@ -1,85 +0,0 @@
-define FRIENDLYARM_NANOPI_R2S_LINUX_CONFIG_FIXUPS
-	# Rockchip RK3328 SoC
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_IOMMU)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_PM_DOMAINS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_IODOMAIN)
-	# TODO: for some reason this just locks up the device
-	#       so we'll have to rely on the softdog :-(
-	# $(call KCONFIG_ENABLE_OPT,CONFIG_DW_WATCHDOG)
-
-	# PHY drivers
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_EMMC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_INNO_USB2)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_TYPEC)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_ROCKCHIP_USB,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_ROCKCHIP_PCIE,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_PHY)
-
-	# Clocks and Power Management
-	$(call KCONFIG_ENABLE_OPT,CONFIG_COMMON_CLK_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CLK_RK3328)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_COMMON_CLK_PWM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PWM_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REGULATOR_GPIO)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REGULATOR_RK808)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CHARGER_RK817)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_RK805)
-
-	# I2C Controller
-	$(call KCONFIG_ENABLE_OPT,CONFIG_I2C_RK3X)
-
-	# I2C/SPI/MFD
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MFD_RK8XX_I2C)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MFD_RK8XX_SPI)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SPI_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_RK805_PWRKEY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_RTC_DRV_RK808)
-
-	# MMC/Storage
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_DW_ROCKCHIP)
-
-	# PCIe
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_ROCKCHIP_HOST,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PCIE_ROCKCHIP_DW_HOST)
-
-	# Thermal and ADC
-	$(call KCONFIG_SET_OPT,CONFIG_ROCKCHIP_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_ROCKCHIP_SARADC,m)
-
-	# Crypto
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CRYPTO_DEV_ROCKCHIP)
-
-	# NVMEM
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_ROCKCHIP_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_ROCKCHIP_OTP,m)
-
-	# Input layer
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MISC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_RK805_PWRKEY)
-
-	# Network: STMMAC Ethernet (WAN port - RK3328 GMAC with RTL8211E PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_STMICRO)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_ETH)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DWMAC_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-
-	# Network: USB Ethernet (LAN port - RTL8153 via USB 3.0)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_NET_DRIVERS,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_RTL8152,m)
-
-	# USB 3.0 xHCI Controller (required for RTL8153 LAN port)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_XHCI_HCD)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_XHCI_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3_HOST)
-
-	# USB 2.0 Host
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_HCD)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_HCD_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_ROOT_HUB_TT)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/friendlyarm-nanopi-r2s/genimage.cfg.in

@@ -1,78 +0,0 @@
-image cfg.ext4 {
-	empty = true
-	temporary = true
-	size = 16M
-
-	ext4 {
-		label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-	}
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-	empty = true
-	temporary = true
-	size = 128M
-
-	ext4 {
-		label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-	}
-}
-
-image #INFIX_ID##VERSION#-nanopi-r2s-sdcard.img {
-	hdimage {
-		partition-table-type = "gpt"
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		offset = 32K
-		image = "idbloader.img"
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		offset = 8M
-		image = "u-boot.itb"
-	}
-
-	partition aux {
-		partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-		offset = 16M
-		image = "aux.ext4"
-	}
-
-	partition primary {
-		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-		bootable = true
-		size = 200M
-		image = "rootfs.squashfs"
-	}
-
-	partition secondary {
-		partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-		bootable = true
-		size = 200M
-		image = "rootfs.squashfs"
-	}
-
-	partition cfg {
-		partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-		image = "cfg.ext4"
-	}
-
-	partition var {
-		partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-		image = "var.ext4"
-	}
-}
-
-# Silence genimage warnings
-config {}

board/aarch64/friendlyarm-nanopi-r2s/rk3328-nanopi-r2s-dts.patch

@@ -1,14 +0,0 @@
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts	2023-11-08 14:09:07.000000000 +0100
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts	2024-01-22 07:31:14.949550828 +0100
-@@ -20,6 +20,11 @@
- 
- 	chosen {
- 		stdout-path = "serial2:1500000n8";
-+
-+		infix {
-+			/* Default admin user password: 'admin' */
-+			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-+		};
- 	};
- 
- 	gmac_clk: gmac-clock {

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/factory-config.cfg

@@ -1,379 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "NanoPi R2S"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "r2s-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/finit.d/enabled/input-event-daemon.conf

@@ -1 +0,0 @@
-../available/input-event-daemon.conf

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/finit.d/wan-monitor.conf

@@ -1 +0,0 @@
-service [12345789] log wan-monitor.sh -- WAN Health monitor

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/iitod.json

@@ -1,91 +0,0 @@
-{
-    "input": {
-	"path": {
-	    "locate":       { "path": "/run/led/locate" },
-
-	    "status-prime": { "path": "/run/led/status-prime" },
-	    "status-ok":    { "path": "/run/led/status-ok" },
-	    "status-err":   { "path": "/run/led/status-err" },
-	    "status-crit":  { "path": "/run/led/status-crit" },
-
-	    "fault-prime":  { "path": "/run/led/fault-prime" },
-	    "fault-ok":     { "path": "/run/led/fault-ok" },
-	    "fault-err":    { "path": "/run/led/fault-err" },
-	    "fault-crit":   { "path": "/run/led/fault-crit" },
-
-	    "wan-up":       { "path": "/run/led/wan-up" },
-
-	    "startup":   { "path": "/run/finit/cond/run/startup/success" },
-	    "fail-safe": { "path": "/run/finit/cond/run/failure/success" },
-	    "panic":     { "path": "/run/finit/cond/run/failure/failure" }
-	},
-	"udev": {
-	    "power-a": { "subsystem": "power_supply" },
-	    "power-b": { "subsystem": "power_supply" }
-	}
-    },
-
-    "output": {
-	"led-group": {
-	    "port-link-act": {
-		"match": ["*:green:tp", "*:green:sfp", "*:green:port" ],
-
-		"rules": [
-		    { "if": "true", "then": { "trigger": "netdev", "link": 1, "rx": 1, "tx": 1 } }
-		]
-	    },
-	    "port-alarm": {
-		"match": ["*:yellow:tp", "*:yellow:sfp", "*:yellow:port" ],
-
-		"rules": [
-		]
-	    }
-	},
-	"led": {
-	    "nanopi-r2s:red:sys": {
-		"rules": [
-		    { "if": "locate",    "then": "@blink-1hz" },
-		    { "if": "panic",     "then": "@blink-5hz" },
-		    { "if": "fail-safe", "then": "@blink-5hz" },
-		    { "if": "startup",   "then": "@off" },
-		    { "if": "true",      "then": "@blink-1hz" }
-		]
-	    },
-
-	    "nanopi-r2s:green:lan": {
-		"rules": [
-		    { "if": "locate",  "then": "@blink-1hz" },
-		    { "if": "panic",   "then": "@blink-5hz" },
-		    { "if": "startup", "then": "@on" }
-		]
-	    },
-
-	    "nanopi-r2s:green:wan": {
-		"rules": [
-		    { "if": "locate", "then": "@blink-1hz" },
-		    { "if": "panic",  "then": "@blink-5hz" },
-		    { "if": "wan-up", "then": "@on" }
-		]
-	    }
-	}
-    },
-
-    "aliases": {
-	"on": {
-	    "brightness": true
-	},
-	"off": {
-	    "brightness": false
-	},
-	"blink-1hz": {
-	    "trigger": "timer",
-	    "delay_on": 500,
-	    "delay_off": 500
-	},
-	"blink-5hz": {
-	    "trigger": "timer",
-	    "delay_on": 100,
-	    "delay_off": 100
-	}
-    }
-}

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/input-event-daemon.conf

@@ -1,5 +0,0 @@
-[Global]
-listen = /dev/input/event1
-
-[Keys]
-RESTART = reboot

board/aarch64/friendlyarm-nanopi-r2s/rootfs/usr/share/product/friendlyarm,nanopi-r2s/etc/udev/rules.d/90-persistent-net.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/ff540000.ethernet/net/eth0", NAME="wan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/ff600000.usb/xhci-hcd.0.auto/usb5/5-1/5-1:1.0/net/*", NAME="lan"

board/aarch64/friendlyarm-nanopi-r2s/uboot/extras.config

@@ -1,16 +0,0 @@
-CONFIG_BUTTON=y
-CONFIG_BUTTON_GPIO=y
-
-CONFIG_LED=y
-CONFIG_LED_GPIO=y
-
-# CONFIG_MMC_PCI is not set
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi r2s-env.dtsi"
-CONFIG_SYS_PROMPT="(r2s) "
-
-CONFIG_ENV_OVERWRITE=y
-# CONFIG_ENV_IS_NOWHERE is not set
-CONFIG_ENV_IS_IN_EXT4=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_ENV_EXT4_INTERFACE="mmc"
-CONFIG_ENV_EXT4_DEVICE_AND_PART="1:1"

board/aarch64/friendlyarm-nanopi-r2s/uboot/r2s-env.dtsi

@@ -1,47 +0,0 @@
-/ {
-	config {
-		environment {
-			boot_targets = "mmc1";
-			ethprime = "eth0";
-
-			/* This is a development platform, hard code developer mode */
-			ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-
-			/* Override default definitiion to add LED feedback */
-                        ixbtn-factory = "
-if button factory-reset; then
-    echo \"Keep button pressed for 10 seconds to engage factory reset ...\"
-
-    for tick in . . . . . . . . . .; do
-        led nanopi-r2s:red:sys   on
-        led nanopi-r2s:green:lan on
-        led nanopi-r2s:green:wan on
-        sleep 0.5
-        led nanopi-r2s:red:sys   off
-        led nanopi-r2s:green:lan off
-        led nanopi-r2s:green:wan off
-        sleep 0.5
-        echo -n \"Checking button: \"
-        button factory-reset || exit
-    done
-
-    echo -n \"Final button check: \"
-    if button factory-reset; then
-        setenv factory_reset yes
-        echo \"FACTORY RESET ENGAGED\"
-    fi
-fi
-";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		factory-reset {
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			label = "factory-reset";
-		};
-	};
-};

board/aarch64/linux_defconfig

@@ -21,24 +21,22 @@ CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_BPF=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
+CONFIG_SMP=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARM64_ERRATUM_2441007=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_1542419=y
-CONFIG_ARM64_ERRATUM_2441009=y
 CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
 CONFIG_NR_CPUS=64
 CONFIG_COMPAT=y
 # CONFIG_SUSPEND is not set
@@ -50,191 +48,67 @@ CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
 CONFIG_ARM_ARMADA_8K_CPUFREQ=y
 CONFIG_ACPI=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
 # CONFIG_GCC_PLUGINS is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
-CONFIG_CMA_AREAS=7
 CONFIG_NET=y
 CONFIG_PACKET=y
-CONFIG_XDP_SOCKETS=y
-CONFIG_XDP_SOCKETS_DIAG=y
+CONFIG_UNIX=y
+CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-CONFIG_NET_IPVTI=m
-CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_GRE=m
+CONFIG_NET_IPVTI=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=y
 CONFIG_NETFILTER_NETLINK_LOG=y
 CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-CONFIG_NF_CONNTRACK_PROCFS=y
 CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_TIMEOUT=y
-CONFIG_NF_CONNTRACK_TIMESTAMP=y
-CONFIG_NF_CONNTRACK_AMANDA=y
 CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NF_CONNTRACK_H323=y
-CONFIG_NF_CONNTRACK_IRC=y
-CONFIG_NF_CONNTRACK_NETBIOS_NS=y
-CONFIG_NF_CONNTRACK_SNMP=y
-CONFIG_NF_CONNTRACK_PPTP=y
-CONFIG_NF_CONNTRACK_SANE=y
-CONFIG_NF_CONNTRACK_SIP=y
-CONFIG_NF_CONNTRACK_TFTP=y
-CONFIG_NF_CT_NETLINK=y
-CONFIG_NF_CT_NETLINK_TIMEOUT=y
-CONFIG_NF_CT_NETLINK_HELPER=y
-CONFIG_NETFILTER_NETLINK_GLUE_CT=y
 CONFIG_NF_TABLES=y
 CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_NETDEV=y
-CONFIG_NFT_NUMGEN=y
-CONFIG_NFT_CT=m
-CONFIG_NFT_FLOW_OFFLOAD=y
-CONFIG_NFT_CONNLIMIT=m
-CONFIG_NFT_LOG=m
-CONFIG_NFT_LIMIT=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_TUNNEL=m
-CONFIG_NFT_QUEUE=m
-CONFIG_NFT_QUOTA=y
-CONFIG_NFT_REJECT=m
-CONFIG_NFT_COMPAT=m
-CONFIG_NFT_HASH=m
-CONFIG_NFT_FIB_INET=y
-CONFIG_NFT_XFRM=m
-CONFIG_NFT_SOCKET=m
-CONFIG_NFT_OSF=m
-CONFIG_NFT_TPROXY=y
-CONFIG_NFT_SYNPROXY=y
-CONFIG_NFT_DUP_NETDEV=m
-CONFIG_NFT_FWD_NETDEV=m
-CONFIG_NFT_FIB_NETDEV=y
-CONFIG_NFT_REJECT_NETDEV=m
-CONFIG_NF_FLOW_TABLE_INET=y
-CONFIG_NF_FLOW_TABLE=y
-CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_BPF=m
-CONFIG_NETFILTER_XT_MATCH_CGROUP=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_IP_SET=y
-CONFIG_IP_SET_BITMAP_IP=y
-CONFIG_IP_SET_BITMAP_IPMAC=y
-CONFIG_IP_SET_BITMAP_PORT=y
-CONFIG_IP_SET_HASH_IP=y
-CONFIG_IP_SET_HASH_IPMARK=y
-CONFIG_IP_SET_HASH_IPPORT=y
-CONFIG_IP_SET_HASH_IPPORTIP=y
-CONFIG_IP_SET_HASH_IPPORTNET=y
-CONFIG_IP_SET_HASH_IPMAC=y
-CONFIG_IP_SET_HASH_MAC=y
-CONFIG_IP_SET_HASH_NETPORTNET=y
-CONFIG_IP_SET_HASH_NET=y
-CONFIG_IP_SET_HASH_NETNET=y
-CONFIG_IP_SET_HASH_NETPORT=y
-CONFIG_IP_SET_HASH_NETIFACE=y
-CONFIG_IP_SET_LIST_SET=y
-CONFIG_NFT_DUP_IPV4=y
-CONFIG_NFT_FIB_IPV4=y
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_LOG_ARP=y
-CONFIG_NF_LOG_IPV4=y
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_RPFILTER=m
-CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NFT_DUP_IPV6=y
-CONFIG_NFT_FIB_IPV6=y
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RPFILTER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_SRH=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
-CONFIG_NF_TABLES_BRIDGE=m
-CONFIG_NFT_BRIDGE_META=m
-CONFIG_NFT_BRIDGE_REJECT=m
-CONFIG_NF_CONNTRACK_BRIDGE=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_NF_LOG_IPV6=m
 CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_BRIDGE_MRP=y
@@ -243,26 +117,9 @@ CONFIG_NET_DSA=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_MQPRIO=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_BPF=y
-CONFIG_NET_CLS_FLOWER=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_NET_ACT_SKBEDIT=y
-CONFIG_DCB=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_MPLS=y
-CONFIG_NET_MPLS_GSO=y
-CONFIG_MPLS_ROUTING=m
-CONFIG_MPLS_IPTUNNEL=m
-CONFIG_NET_PKTGEN=y
-# CONFIG_WIRELESS is not set
+CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
-CONFIG_LWTUNNEL=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_IOV=y
@@ -284,6 +141,7 @@ CONFIG_MTD_SPI_NOR=y
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_NULL_BLK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=y
@@ -296,9 +154,9 @@ CONFIG_SCSI_SAS_ATA=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
-CONFIG_SATA_MOBILE_LPM_POLICY=0
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_MVEBU=y
+CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_DM=y
@@ -306,23 +164,25 @@ CONFIG_DM_INIT=y
 CONFIG_DM_VERITY=y
 CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
 CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_WIREGUARD=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_IPVLAN=m
-CONFIG_IPVTAP=m
-CONFIG_VXLAN=m
-CONFIG_GENEVE=m
-CONFIG_BAREUDP=m
-CONFIG_MACSEC=m
-CONFIG_TUN=m
-CONFIG_VETH=m
+CONFIG_BONDING=y
+CONFIG_DUMMY=y
+CONFIG_NET_TEAM=y
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
+CONFIG_NET_TEAM_MODE_LOADBALANCE=y
+CONFIG_MACVLAN=y
+CONFIG_MACVTAP=y
+CONFIG_IPVLAN=y
+CONFIG_IPVTAP=y
+CONFIG_VXLAN=y
+CONFIG_GENEVE=y
+CONFIG_BAREUDP=y
+CONFIG_MACSEC=y
+CONFIG_TUN=y
+CONFIG_VETH=y
 CONFIG_VIRTIO_NET=y
 CONFIG_NLMON=y
 CONFIG_NET_VRF=y
-CONFIG_NET_DSA_MV88E6XXX=m
+CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_NET_DSA_MV88E6XXX_PTP=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_ADAPTEC is not set
@@ -347,10 +207,9 @@ CONFIG_NET_DSA_MV88E6XXX_PTP=y
 # CONFIG_NET_VENDOR_GOOGLE is not set
 # CONFIG_NET_VENDOR_HISILICON is not set
 # CONFIG_NET_VENDOR_HUAWEI is not set
-CONFIG_MVNETA=m
-CONFIG_MVPP2=m
+CONFIG_MVNETA=y
+CONFIG_MVPP2=y
 # CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_META is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_SPARX5_SWITCH=y
 # CONFIG_NET_VENDOR_MICROSEMI is not set
@@ -386,31 +245,21 @@ CONFIG_8139CP=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_NET_VENDOR_XILINX is not set
 CONFIG_SFP=y
-CONFIG_AX88796B_PHY=y
 CONFIG_MARVELL_PHY=y
-CONFIG_MARVELL_10G_PHY=m
+CONFIG_MARVELL_10G_PHY=y
 CONFIG_MICREL_PHY=y
 CONFIG_MICROCHIP_PHY=y
 CONFIG_MICROCHIP_T1_PHY=y
-CONFIG_MICROSEMI_PHY=m
+CONFIG_MICROSEMI_PHY=y
 CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_MVUSB=m
+CONFIG_MDIO_MVUSB=y
 CONFIG_MDIO_MSCC_MIIM=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_USB_RTL8150=m
-CONFIG_USB_RTL8152=m
-CONFIG_USB_LAN78XX=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
 # CONFIG_USB_NET_CDC_NCM is not set
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
 # CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -430,19 +279,18 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_VIRTIO_CONSOLE=y
-CONFIG_HW_RANDOM_CN10K=m
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_DESIGNWARE_CORE=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_SLAVE=y
 CONFIG_SPI=y
 CONFIG_SPI_ARMADA_3700=y
-CONFIG_SPI_ORION=y
+CONFIG_SPI_NXP_FLEXSPI=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_MUX=y
 CONFIG_SPI_SPIDEV=m
@@ -454,7 +302,6 @@ CONFIG_GPIO_PL061=y
 CONFIG_GPIO_XGENE=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_XGENE=y
@@ -465,17 +312,15 @@ CONFIG_SENSORS_SPARX5=y
 CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_SYSFS=y
 CONFIG_SOFT_WATCHDOG=y
-CONFIG_GPIO_WATCHDOG=y
-CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_ARMADA_37XX_WATCHDOG=y
 CONFIG_I6300ESB_WDT=y
 CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_MFD_ROHM_BD718XX=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -484,6 +329,7 @@ CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_PCA9450=y
 CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_S2MPS11=y
 # CONFIG_HID_GENERIC is not set
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_APPLE is not set
@@ -493,35 +339,33 @@ CONFIG_REGULATOR_QCOM_SPMI=y
 # CONFIG_HID_CYPRESS is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
-CONFIG_USB_ULPI_BUS=y
 CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OTG=y
-CONFIG_USB_XHCI_HCD=m
-CONFIG_USB_XHCI_MVEBU=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_HCD_PLATFORM=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PLATFORM=m
-CONFIG_USB_STORAGE=m
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PCI=y
-CONFIG_USB_CHIPIDEA=m
+CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
-CONFIG_USB_HSIC_USB3503=m
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_SNP_UDC_PLAT=y
 CONFIG_TYPEC=y
-CONFIG_TYPEC_TCPM=m
-CONFIG_TYPEC_TCPCI=m
-CONFIG_TYPEC_RT1711H=m
+CONFIG_TYPEC_TCPM=y
+CONFIG_TYPEC_TCPCI=y
+CONFIG_TYPEC_RT1711H=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -541,13 +385,12 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_SYSCON=y
 CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_NETDEV=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_PCF8523=y
+CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_EFI=y
 CONFIG_RTC_DRV_PL031=y
@@ -562,6 +405,7 @@ CONFIG_VIRTIO_INPUT=y
 CONFIG_VIRTIO_MMIO=y
 # CONFIG_SURFACE_PLATFORMS is not set
 CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_XGENE=y
 CONFIG_COMMON_CLK_BD718XX=y
 CONFIG_MAILBOX=y
@@ -571,26 +415,21 @@ CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
 CONFIG_TI_ADC081C=y
 CONFIG_PWM=y
-CONFIG_RESET_GPIO=y
+CONFIG_PHY_XGENE=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PHY_MVEBU_CP110_UTMI=y
 CONFIG_PHY_SAMSUNG_USB2=y
-CONFIG_NVMEM_LAYOUT_ONIE_TLV=y
 CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=y
+CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VIRTIO_FS=y
 CONFIG_OVERLAY_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_EXFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_SQUASHFS=y
@@ -598,35 +437,22 @@ CONFIG_SQUASHFS_LZO=y
 CONFIG_SQUASHFS_XZ=y
 CONFIG_SQUASHFS_ZSTD=y
 CONFIG_9P_FS=y
-CONFIG_NLS_DEFAULT="iso8859-15"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
 CONFIG_SECURITY=y
-CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,bpf"
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
 CONFIG_IRQ_POLL=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_TIMEOUT=20
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_HARDLOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_WQ_WATCHDOG=y
-CONFIG_WQ_CPU_INTENSIVE_REPORT=y
-CONFIG_TEST_LOCKUP=m
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_FUNCTION_TRACER=y
 # CONFIG_STRICT_DEVMEM is not set