mech: Play around with a native yang model

.github/workflows/build.yml

@@ -1,78 +1,61 @@
 name: Bob the Builder
 
+# Consider switching to 'on: workflow_dispatch' when activity increases.
 on:
+  push:
+    branches:
+      - '*'
   pull_request:
     branches:
-      - main
-    types:
-      - closed
-  workflow_dispatch:
+      - '*'
 
 jobs:
   build:
-    if: ${{github.ref == 'refs/heads/main' && github.event_name == 'push'}} || github.event_name == 'workflow_dispatch'
-    name: Build ${{ matrix.platform }} ${{ matrix.variant }}
+    name: Build ${{ matrix.platform }}
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        platform: [aarch64, x86_64]
-        variant: [netconf, classic]
+        platform: [aarch64, amd64]
       fail-fast: false
     steps:
       - uses: actions/checkout@v3
       - name: Set Build Variables
         id: vars
         run: |
-          if [ "${{ matrix.variant }}" = "netconf" ]; then
-              target=${{ matrix.platform }}
-          else
-              target=${{ matrix.platform }}-${{ matrix.variant }}
-          fi
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
+          echo "dir=infix-${{ matrix.platform }}"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-${{ matrix.platform }}.tar.gz" >> $GITHUB_OUTPUT
       - name: Restore Cache of dl/
         uses: actions/cache@v3
         with:
           path: dl/
-          key: dl-${{ matrix.platform }}-${{ matrix.variant }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          key: dl-${{ matrix.platform }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
           restore-keys: |
-            dl-${{ matrix.platform }}-${{ matrix.variant }}-
             dl-${{ matrix.platform }}-
             dl-
       - name: Restore Cache of .ccache/
         uses: actions/cache@v3
         with:
-          path: .ccache/
-          key: ccache-${{ matrix.platform }}-${{ matrix.variant }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          path: .buildroot-ccache/
+          key: ccache-${{ matrix.board }}-os-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
           restore-keys: |
-            ccache-${{ matrix.platform }}-${{ matrix.variant }}-
-            ccache-${{ matrix.platform }}-
-            ccache-
+            ccache-${{ matrix.board }}-os-
+            ccache-${{ matrix.board }}-
+            ccache--os-
       - name: Configure & Build
         run: |
-          if [ "${{ matrix.variant }}" = "netconf" ]; then
-              target=${{ matrix.platform }}_defconfig
-          else
-              target=${{ matrix.platform }}_${{ matrix.variant }}_defconfig
-          fi
-          echo "Buildring $target ..."
-          make $target
+          make ${{ matrix.platform }}_defconfig
           make
       - name: Prepare Artifact
         run: |
           cd output
           mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar chfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-      - name: Test
-        if: matrix.platform == 'x86_64' && matrix.variant == 'netconf'
-        run: |
-          make test-qeneth
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+          ls -l
+          ls -l ${{ steps.vars.outputs.dir }}
       - uses: actions/upload-artifact@v3
         with:
           path: output/${{ steps.vars.outputs.tgz }}
   release:
-    if: github.repository == 'kernelkit/infix' && github.ref == 'refs/heads/main'
     name: Upload Latest Build
     needs: build
     runs-on: ubuntu-latest

.github/workflows/regression.yml

@@ -1,64 +0,0 @@
-name: Reggie Regression
-
-on:
-  push:
-    branches:
-      - '*'
-  pull_request:
-    branches:
-      - '*'
-  workflow_dispatch:
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.head_ref || github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  build:
-    name: Regression Testing
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set Build Variables
-        id: vars
-        run: |
-          target=x86_64-minimal
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-      - name: Restore Cache of dl/
-        uses: actions/cache@v3
-        with:
-          path: dl/
-          key: dl-x86_64-netconf-${{ hashFiles('.git/modules/buildroot/refs/heads/master', 'package/*/*.hash') }}
-          restore-keys: |
-            dl-x86_64-netconf-
-            dl-x86_64-
-            dl-
-      - name: Restore Cache of .ccache/
-        uses: actions/cache@v3
-        with:
-          path: .ccache/
-          key: ccache-x86_64-netconf-${{ hashFiles('.git/modules/buildroot/refs/head/master', 'package/*/*.hash') }}
-          restore-keys: |
-            ccache-x86_64-netconf-
-            ccache-x86_64-
-            ccache-
-      - name: Configure Minimal NETCONF
-        run: |
-          make x86_64_minimal_defconfig
-      - name: Build
-        run: |
-          make
-      - name: Prepare Artifact
-        run: |
-          cd output
-          mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-      - name: Upload Artifact
-        uses: actions/upload-artifact@v3
-        with:
-          path: output/${{ steps.vars.outputs.tgz }}
-      - name: Regression Test
-        run: |
-          make test-qeneth

.github/workflows/release.yml

@@ -1,100 +0,0 @@
-name: Release General
-
-on:
-  push:
-    tags:
-      - 'v[0-9]*.*'
-
-jobs:
-  build:
-    if: github.repository == 'kernelkit/infix' && startsWith(github.ref, 'refs/tags/')
-    name: Build Infix ${{ github.ref_name }} [${{ matrix.platform }}-${{ matrix.variant }}]
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        platform: [aarch64, x86_64]
-        variant: [netconf, classic]
-      fail-fast: false
-    steps:
-      - uses: actions/checkout@v3
-      - name: Set Release Variables
-        id: build
-        run: |
-          ver=${GITHUB_REF#refs/tags/v}
-          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          if echo $ver | grep -qE '[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
-            echo "pre=true"  >> $GITHUB_OUTPUT
-          else
-            echo "pre=false" >> $GITHUB_OUTPUT
-          fi
-          if [ "${{ matrix.variant }}" = "netconf" ]; then
-              target=${{ matrix.platform }}-${ver}
-          else
-              target=${{ matrix.platform }}-${{ matrix.variant }}-${ver}
-          fi
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-      - name: Restore Cache of dl/
-        uses: actions/cache@v3
-        with:
-          path: dl/
-          key: dl-${{ matrix.platform }}-${{ matrix.variant }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
-          restore-keys: |
-            dl-${{ matrix.platform }}-${{ matrix.variant }}-
-            dl-${{ matrix.platform }}-
-            dl-
-      - name: Restore Cache of .ccache/
-        uses: actions/cache@v3
-        with:
-          path: .ccache/
-          key: ccache-${{ matrix.platform }}-${{ matrix.variant }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
-          restore-keys: |
-            ccache-${{ matrix.platform }}-${{ matrix.variant }}-
-            ccache-${{ matrix.platform }}-
-            ccache-
-      - name: Configure & Build
-        env:
-          INFIX_RELEASE: ${{ steps.build.outputs.ver }}
-        run: |
-          if [ "${{ matrix.variant }}" = "netconf" ]; then
-              target=${{ matrix.platform }}_defconfig
-          else
-              target=${{ matrix.platform }}_${{ matrix.variant }}_defconfig
-          fi
-          echo "Buildring $target ..."
-          make $target
-          make
-      - name: Prepare Artifact
-        run: |
-          cd output
-          mv images ${{ steps.build.outputs.dir }}
-          ln -s ${{ steps.build.outputs.dir }} images
-          tar chfz ${{ steps.build.outputs.tgz }} ${{ steps.build.outputs.dir }}
-      - uses: actions/upload-artifact@v3
-        with:
-          path: output/${{ steps.build.outputs.tgz }}
-  release:
-    name: Release Infix ${{ github.ref_name }}
-    needs: build
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/download-artifact@v3
-      - name: Extract ChangeLog entry ...
-        run: |
-          awk '/-----*/{if (x == 1) exit; x=1;next}x' ChangeLog.md \
-              |head -n -1 > release.md
-          cat release.md
-      - uses: ncipollo/release-action@v1
-        with:
-          name: Infix ${{ github.ref_name }}
-          prerelease: ${{ needs.build.outputs.pre }}
-          bodyFile:  release.md
-          artifacts: artifact/*
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Infix ${{ github.ref_name }} Released! :rocket:
-          
-          For the public download links of this release, please see:
-           <https://github.com/kernelkit/infix/releases/tag/${{ github.ref_name }}>
-          EOF

.gitignore

@@ -3,5 +3,4 @@
 /.ccache
 /dl
 /output*
-/test/.venv
 /local.mk

.gitmodules

@@ -1,9 +1,3 @@
 [submodule "buildroot"]
 	path = buildroot
-	url = ../buildroot.git
-[submodule "9pm"]
-	path = 9pm
-	url = ../9pm
-[submodule "qeneth"]
-	path = qeneth
-	url = ../qeneth.git
+	url = https://github.com/buildroot/buildroot.git

ChangeLog.md

@@ -1,58 +0,0 @@
-Change Log
-==========
-
-All notable changes to the project are documented in this file.
-
-
-[v23.06.0][] - 2023-06-23
--------------------------
-
-Midsummer release.  The first official Infix release, based on [Buildroot
-2023.02.2][br2023.02.2], with NETCONF support using the [sysrepo][] and
-[netopeer2][].
-
-Supported YANG models in addition to those used by sysrepo and netopeer:
-
- - [ietf-system][]
-   - Everything except radius authentication and timezone-utc-offset
-   - Augmented with MotD (Message of the Day), Infix YANG model
- - [ietf-interfaces][]
-   - [ietf-ip][] augmented with IPv4LL similar to standardized IPv6LL
-   - [ietf-if-vlan-encapsulation][], Linux VLAN interfaces, e.g. `eth0.10`
-   - Linux bridge interfaces with native VLAN support, Infix YANG model
-   - Linux VETH pairs, Infix YANG model
-
-> **DISCLAIMER:** the [Infix YANG models for Linux][yang23.06], are
-> still under heavy development.  New revisions are expected which may
-> not be backwards compatible.  When upgrading to a new release, test on
-> a GNS3 staging environment first, or start over from a factory reset.
-
-[br2023.02.2]:     https://git.busybox.net/buildroot/tag/?h=2023.02.2
-[ietf-system]:     https://www.rfc-editor.org/rfc/rfc7317.html
-[ietf-interfaces]: https://www.rfc-editor.org/rfc/rfc7223.html
-[ietf-ip]:         https://www.rfc-editor.org/rfc/rfc8344.html
-[ietf-if-vlan-encapsulation]: https://www.ietf.org/id/draft-ietf-netmod-sub-intf-vlan-model-08.html
-[yang23.06]:       https://github.com/kernelkit/infix/blob/aea74842e0475441d8df834f2dcd8cbc21fa253d/src/confd/yang/infix-interfaces%402023-06-05.yang
-
-### Changes
-
- - Bump sysrepo to v2.2.73
-   - Backport support for initializing factory-default data store with
-     default config data also for sysrepo internal modules.
-   - Add support for `sysrepocfg -Cfactory -d running`, for testing
- - Bump netopeer2 to v2.1.62
- - Bump libyang to v2.1.80
- - Add klish, a CLI for sysrepo
- - Add podman for container support, backported from upstream Buildroot
- - Add conmon for container support, backported from upstream Buildroot
- - Backport cni-plugins support for host-local and static plugins
-
-### Fixes
-
- - N/A
-
-[buildroot]:  https://buildroot.org/
-[UNRELEASED]: https://github.com/kernelkit/infix/compare/v23.06.0...HEAD
-[v23.06.0]:   https://github.com/kernelkit/infix/compare/BASE...v23.06.0
-[sysrepo]:    https://www.sysrepo.org/
-[netopeer2]:  https://github.com/CESNET/netopeer2

Config.in

@@ -1,35 +1,13 @@
-# For /etc/os-release, uses CondtionArchitechture= from systemd.unit(5)
-config INFIX_ARCH
-	string
-	default "arm"     if BR2_arm
-	default "arm64"   if BR2_aarch64
-	default "mips64"  if BR2_mips64
-	default "riscv64" if BR2_riscv
-	default "x86_64"  if BR2_x86_64
-
-# For /etc/os-release, VARIANT & VARIANT_ID used, e.g., in mnt script
-choice
-	prompt "Select variant/flavor"
-	default INFIX_VARIANT_NETCONF
-
-config INFIX_VARIANT_NETCONF
-	bool "NETCONF"
-	help
-	  Managed NETCONF mode, /etc is a ramdisk, all configuration is
-	  generated by sysrepo plugins using NETCONF (xml) or RESTCONF.
-
-config INFIX_VARIANT_CLASSIC
-	bool "Classic /etc mode"
-	help
-	  User managed mode, read-write configuration files in /etc that
-	  is saved across reboots.
-
-endchoice
-
 menu "Packages"
 
 source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in"
 
 endmenu
 
+menu "QEMU Virtualization"
+
+source "$BR2_EXTERNAL_INFIX_PATH/qemu/Config.in"
+
+endmenu
+
 source "$BR2_EXTERNAL_INFIX_PATH/board/common/Config.in"

README.md

@@ -1,108 +1,16 @@
 <img align="right" src="doc/text3134.png" alt="Infix Linux Networking Made Easy">
 
-* [Introduction](#introduction)
-* [NETCONF Mode](#netconf-mode)
-  * [NETCONF Mode](#netconf-mode)
-  * [Classic Mode](#classic-mode)
-  * [Hybrid Mode](#hybrid-mode)
-* [Hardware](#hardware)
-* [Qemu](#qemu)
-* [GNS3](#gns3)
-* [Building](#building)
-* [Origin & Licensing](origin--licensing)
-
-
-Introduction
-------------
-
 Infix is an embedded Linux Network Operating System (NOS) based on
-[Buildroot][1], [Finit][2], [ifupdown-ng][3], and [sysrepo][6].
+[Buildroot][1], [Finit][2], [ifupdown-ng][3], and [Clixon][6].
 Providing an easy-to-maintain and easy-to-port Open Source base for
 networked equipment.
 
-> See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
-> page for out pre-built images.  The *Latest Build* has the bleeding edge
-> images, if possible we recommend using a versioned release.
->
-> For customer specific builds of Infix, see your respective repository.
+See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
+page for out pre-built images.  The *Latest Build* has the bleeding edge
+images, if possible we recommend using a versioned release.
 
-Infix has two main *flavors*, or defconfigs:
-
- - **NETCONF:** the default, managed using, e.g., the `cli` tool
- - **Classic:** built from `$ARCH_classic_defconfig`, more below
-
-Both flavors have an `admin` user, which is allowed to log in from
-remote, password `admin` on standard builds.  It is the recommended
-account to use for managing Infix.  (The `root` account is currently
-also available, but will soon become a non-login account used only for
-running system services.)
-
-
-### NETCONF Mode
-
-NETCONF is the primary reason Infix exists.  Configuration of an Infix
-device can be done either remotely, using tools like [netconf-client][]
-or [netopeer2-cli][], or locally using the [`cli` tool](doc/cli.md).
-
-Infix use [sysrepo][6] as the data store for NETCONF.  A set of plugins
-configure the network, using iproute2, generate configuration files in
-`/etc`, and control the system daemons, e.g., enable DHCP client on an
-interface.
-
-
-### Classic Mode
-
-Here it is up to the administrator to modify configuration files in
-`/etc` and control the system daemons using the `initctl` tool.
-
-See the online `help` command for an introduction to the system.
-
-
-### Hybrid Mode
-
-Since Infix is under heavy development, it does not yet have all bells
-and whistles in place, in particular in the default build.  To that end
-it is possible to manually manage certain services that are not yet
-possible to configure using NETCONF.
-
-At bootstrap Finit can start user scripts from a [run-parts(8)][] like
-directory: `/cfg/start.d`.  For example, the following starts OSPF:
-
-```sh
-root@infix:~$ mkdir /cfg/start.d
-root@infix:~$ cd /cfg/start.d
-root@infix:/cfg/start.d$ cat <<EOF >10-enable-ospf.sh
-#!/bin/sh
-# Use vtysh to modify the OSPF configuration
-rm /etc/frr/frr.conf
-ln -s /cfg/frr/frr.conf /etc/frr/
-initctl enable zebra
-initctl enable ospfd
-initctl enable bfdd
-exit 0
-EOF
-root@infix:/cfg/start.d$ chmod +x 10-enable-ospf.sh
-```
-
-> **Note:** Neither [Frr](https://frrouting.org) (Zebra/OSPF/BFD) or
-> [podman](https://podman.io) are enabled in default Infix builds.
-> Please use customer specific builds, or enable it yourself in Infix by
-> using `make menuconfig` followed by rebuilding the image.
-
-This is also the way to start containers (provided the images have been
-downloaded with `podman pull` first):
-
-```
-root@infix:/cfg/start.d$ cat <<EOF >20-enable-container.sh
-#!/bin/sh
-podman-service -e -d "Nginx container" -p "-p 80:80" nginx:alpine
-exit 0
-EOF
-root@infix:/cfg/start.d$ chmod +x 20-enable-container.sh
-```
-
-Reboot to activate the changes.  To activate the changes without
-rebooting, run the script and call `initctl reload`.
+> Login with user 'root', no password by default on plain builds.  See
+> the online `help` command for an introduction to the system.
 
 
 Hardware
@@ -120,7 +28,7 @@ may enable additional boards in the config, of course):
 See the aarch64 specific [documentation](board/aarch64/README.md) for more
 information.
 
-### x86_64
+### amd64
 
 Primarily intended to be run under [QEMU][] for development & test as
 well as evaluation, demo and [training][] purposes, e.g. using [GNS3][]
@@ -140,34 +48,10 @@ under `External options -> QEMU virtualization`.
 GNS3
 ----
 
-Download the [latest build][0] of the `x86_64`, or `x86_64_classic`
-flavor.  Unpack in a dedicated directory and use ["Import Appliance"][9]
-to install the `.gns3a` file into GNS3.  Infix (`x86_64`) is in the
-"Router" category, it has 10 interfaces available by default for use as
-switch ports or routing.  The *classic* build only has one interface by
-default, geared more towards acting as an end device.
-
-
-Building
---------
-
-Buildroot is almost stand-alone, but need a few locally installed tools
-to bootstrap itself.  For details, see the [excellent manual][manual].
-
-Briefly, to build an Infix image; select the target and then make:
-
-    make x86_64_defconfig
-    make
-
-Online help is available:
-
-    make help
-
-To see available defconfigs for supported targets, use:
-
-    make list-defconfigs
-
-> **Note:** build dependencies (Debian/Ubuntu): <kbd>sudo apt install make libssl-dev</kbd>
+Download the [latest build][0] of amd64, unpack in a dedicated directory
+and use ["Import Appliance"][9] to install the `.gns3a` file into GNS3.
+Infix will show up in the "Router" category, it has 10 interfaces
+available by default for use as switch ports or routing.
 
 
 Origin & Licensing
@@ -204,14 +88,9 @@ any GPL[^1] licensed library.
 [3]: https://github.com/ifupdown-ng/ifupdown-ng
 [4]: https://en.wikipedia.org/wiki/GNU_Lesser_General_Public_License
 [5]: https://lwn.net/Articles/117972/
-[6]: https://www.sysrepo.org/
+[6]: https://github.com/clicon/clixon
 [7]: https://github.com/wkz/qeneth
-[8]: https://addiva-elektronik.github.io/2023/05/12/using-netconf-client-and-server-to-update-switch-configuration/
 [9]: https://docs.gns3.com/docs/using-gns3/beginners/import-gns3-appliance/
 [QEMU]: https://www.qemu.org/
 [GNS3]: https://gns3.com/
 [training]: https://addiva-elektronik.github.io/
-[manual]: https://buildroot.org/downloads/manual/manual.html
-[run-parts(8)]: https://manpages.ubuntu.com/manpages/trusty/man8/run-parts.8.html
-[netconf-client]: https://pypi.org/project/netconf-client/
-[netopeer2-cli]: https://github.com/CESNET/netopeer2

board/aarch64/linux_defconfig

@@ -26,7 +26,6 @@ CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_BPF=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
@@ -68,32 +67,28 @@ CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XDP_SOCKETS=y
-CONFIG_XDP_SOCKETS_DIAG=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NET_IPVTI=m
-CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_GRE=m
+CONFIG_NET_IPVTI=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=y
@@ -103,80 +98,17 @@ CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CONNTRACK_FTP=y
 CONFIG_NF_TABLES=y
 CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_NETDEV=y
-CONFIG_NFT_CT=m
-CONFIG_NFT_CONNLIMIT=m
-CONFIG_NFT_LOG=m
-CONFIG_NFT_LIMIT=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_TUNNEL=m
-CONFIG_NFT_OBJREF=m
-CONFIG_NFT_QUEUE=m
-CONFIG_NFT_REJECT=m
-CONFIG_NFT_COMPAT=m
-CONFIG_NFT_HASH=m
-CONFIG_NFT_XFRM=m
-CONFIG_NFT_SOCKET=m
-CONFIG_NFT_OSF=m
-CONFIG_NFT_DUP_NETDEV=m
-CONFIG_NFT_FWD_NETDEV=m
-CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_BPF=m
-CONFIG_NETFILTER_XT_MATCH_CGROUP=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
-CONFIG_NF_TABLES_BRIDGE=m
-CONFIG_NFT_BRIDGE_META=m
-CONFIG_NF_CONNTRACK_BRIDGE=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_BPFILTER=y
+CONFIG_NF_LOG_IPV6=m
 CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_BRIDGE_MRP=y
@@ -185,22 +117,9 @@ CONFIG_NET_DSA=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_BPF=y
-CONFIG_NET_CLS_FLOWER=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_MPLS=y
-CONFIG_NET_MPLS_GSO=y
-CONFIG_MPLS_ROUTING=m
-CONFIG_MPLS_IPTUNNEL=m
-CONFIG_NET_PKTGEN=y
-# CONFIG_WIRELESS is not set
+CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
-CONFIG_LWTUNNEL=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_IOV=y
@@ -222,6 +141,7 @@ CONFIG_MTD_SPI_NOR=y
 CONFIG_OF_OVERLAY=y
 CONFIG_BLK_DEV_NULL_BLK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_NVME=y
@@ -244,21 +164,21 @@ CONFIG_DM_INIT=y
 CONFIG_DM_VERITY=y
 CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
 CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NET_TEAM=m
-CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
-CONFIG_NET_TEAM_MODE_LOADBALANCE=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_IPVLAN=m
-CONFIG_IPVTAP=m
-CONFIG_VXLAN=m
-CONFIG_GENEVE=m
-CONFIG_BAREUDP=m
-CONFIG_MACSEC=m
-CONFIG_TUN=m
-CONFIG_VETH=m
+CONFIG_BONDING=y
+CONFIG_DUMMY=y
+CONFIG_NET_TEAM=y
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
+CONFIG_NET_TEAM_MODE_LOADBALANCE=y
+CONFIG_MACVLAN=y
+CONFIG_MACVTAP=y
+CONFIG_IPVLAN=y
+CONFIG_IPVTAP=y
+CONFIG_VXLAN=y
+CONFIG_GENEVE=y
+CONFIG_BAREUDP=y
+CONFIG_MACSEC=y
+CONFIG_TUN=y
+CONFIG_VETH=y
 CONFIG_VIRTIO_NET=y
 CONFIG_NLMON=y
 CONFIG_NET_VRF=y
@@ -392,7 +312,6 @@ CONFIG_SENSORS_SPARX5=y
 CONFIG_SENSORS_JC42=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -503,9 +422,6 @@ CONFIG_MUX_MMIO=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y

board/amd64/grub.cfg

@@ -0,0 +1,29 @@
+set timeout="1"
+
+set default="primary"
+set log="loglevel=4"
+
+load_env ORDER DEBUG
+
+for slot in $ORDER; do
+    set default="$slot"
+    break
+done
+
+if [ "$DEBUG" ]; then
+    set log="debug"
+fi
+
+submenu "primary" "$log" {
+	set slot="$1"
+	set append="$2"
+	set root=(hd0,gpt3)
+	source /boot/grub/grub.cfg
+}
+
+submenu "secondary" "$log"  {
+	set slot="$1"
+	set append="$2"
+	set root=(hd0,gpt4)
+	source /boot/grub/grub.cfg
+}

board/amd64/grubenv

@@ -1,10 +1,8 @@
 # GRUB Environment Block
 # WARNING: Do not edit this file by tools other than grub-editenv!!!
-ORDER=primary secondary net
+ORDER=primary secondary
 primary_OK=1
 secondary_OK=1
-net_OK=1
 primary_TRY=0
 secondary_TRY=0
-net_TRY=0
-#########################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
+################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################

board/amd64/linux_defconfig

@@ -25,7 +25,6 @@ CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
-CONFIG_CGROUP_BPF=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
@@ -39,32 +38,25 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XDP_SOCKETS=y
-CONFIG_XDP_SOCKETS_DIAG=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_NET_IPGRE=y
 CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NET_IPVTI=m
-CONFIG_NET_FOU_IP_TUNNELS=y
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_GRE=m
+CONFIG_NET_IPVTI=y
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
 CONFIG_IPV6_MROUTE=y
 CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
 CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
 CONFIG_NETFILTER=y
 CONFIG_BRIDGE_NETFILTER=y
 CONFIG_NETFILTER_NETLINK_QUEUE=y
@@ -74,80 +66,17 @@ CONFIG_NF_CONNTRACK_EVENTS=y
 CONFIG_NF_CONNTRACK_FTP=y
 CONFIG_NF_TABLES=y
 CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_NETDEV=y
-CONFIG_NFT_CT=m
-CONFIG_NFT_CONNLIMIT=m
-CONFIG_NFT_LOG=m
-CONFIG_NFT_LIMIT=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_TUNNEL=m
-CONFIG_NFT_OBJREF=m
-CONFIG_NFT_QUEUE=m
-CONFIG_NFT_REJECT=m
-CONFIG_NFT_COMPAT=m
-CONFIG_NFT_HASH=m
-CONFIG_NFT_XFRM=m
-CONFIG_NFT_SOCKET=m
-CONFIG_NFT_OSF=m
-CONFIG_NFT_DUP_NETDEV=m
-CONFIG_NFT_FWD_NETDEV=m
-CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_BPF=m
-CONFIG_NETFILTER_XT_MATCH_CGROUP=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
-CONFIG_NF_TABLES_BRIDGE=m
-CONFIG_NFT_BRIDGE_META=m
-CONFIG_NF_CONNTRACK_BRIDGE=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_IP6=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_BPFILTER=y
+CONFIG_NF_LOG_IPV6=m
 CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_BRIDGE_MRP=y
@@ -155,22 +84,8 @@ CONFIG_BRIDGE_CFM=y
 CONFIG_VLAN_8021Q=y
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_BPF=y
-CONFIG_NET_CLS_FLOWER=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_MPLS=y
-CONFIG_NET_MPLS_GSO=y
-CONFIG_MPLS_ROUTING=m
-CONFIG_MPLS_IPTUNNEL=m
-CONFIG_NET_PKTGEN=y
-# CONFIG_WIRELESS is not set
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
-CONFIG_LWTUNNEL=y
 CONFIG_PCI=y
 CONFIG_UEVENT_HELPER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -180,6 +95,7 @@ CONFIG_FW_CFG_SYSFS=y
 CONFIG_FW_CFG_SYSFS_CMDLINE=y
 CONFIG_BLK_DEV_NULL_BLK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
@@ -192,21 +108,21 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_VERITY=y
 CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
 CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NET_TEAM=m
-CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
-CONFIG_NET_TEAM_MODE_LOADBALANCE=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_IPVLAN=m
-CONFIG_IPVTAP=m
-CONFIG_VXLAN=m
-CONFIG_GENEVE=m
-CONFIG_BAREUDP=m
-CONFIG_MACSEC=m
-CONFIG_TUN=m
-CONFIG_VETH=m
+CONFIG_BONDING=y
+CONFIG_DUMMY=y
+CONFIG_NET_TEAM=y
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y
+CONFIG_NET_TEAM_MODE_LOADBALANCE=y
+CONFIG_MACVLAN=y
+CONFIG_MACVTAP=y
+CONFIG_IPVLAN=y
+CONFIG_IPVTAP=y
+CONFIG_VXLAN=y
+CONFIG_GENEVE=y
+CONFIG_BAREUDP=y
+CONFIG_MACSEC=y
+CONFIG_TUN=y
+CONFIG_VETH=y
 CONFIG_VIRTIO_NET=y
 CONFIG_NLMON=y
 CONFIG_NET_VRF=y
@@ -219,26 +135,30 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM_VIRTIO=m
-CONFIG_I2C=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_SYSFS=y
 CONFIG_SOFT_WATCHDOG=y
 CONFIG_I6300ESB_WDT=y
+CONFIG_DRM=y
+CONFIG_DRM_QXL=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM_BOCHS=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+CONFIG_SND_HDA_GENERIC=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_RTC_CLASS=y
-CONFIG_SYNC_FILE=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_INPUT=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
 CONFIG_EXT4_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_VIRTIO_FS=y
@@ -253,8 +173,7 @@ CONFIG_SQUASHFS_ZSTD=y
 CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_SHA256=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y

board/amd64/rootfs/boot/grub/grub.cfg

@@ -0,0 +1,3 @@
+menuentry "Infix" --id infix {
+	linux /boot/bzImage root=PARTLABEL=$slot rauc.slot=$slot console=ttyS0 $append nokaslr
+}

board/amd64/rootfs/etc/rauc/system.conf

@@ -16,7 +16,3 @@ bootname=primary
 [slot.rootfs.1]
 device=/dev/disk/by-partlabel/secondary
 bootname=secondary
-
-[slot.net.0]
-device=/dev/ram
-bootname=net

board/classic/post-build.sh

@@ -1,8 +0,0 @@
-#!/bin/sh
-. "$BR2_CONFIG"
-
-# Prevent regen of host key at every boot, /etc is saved across reboots
-if [ -L "$TARGET_DIR/etc/dropbear" ]; then
-	rm    "$TARGET_DIR/etc/dropbear"
-	mkdir "$TARGET_DIR/etc/dropbear"
-fi

board/classic/rootfs/bin/setup

@@ -1,3 +0,0 @@
-#!/bin/sh
-pdmenu
-clear

board/classic/rootfs/etc/finit.d/20-infix-classic.conf

@@ -1 +0,0 @@
-run [S] /lib/infix/swup --

board/classic/rootfs/lib/infix/swup

@@ -1,62 +0,0 @@
-#!/bin/sh
-# Factory default:
-#  1) all switch ports in VLAN 1 of br0
-#  2) no switch ports => DHCP on eth0
-#  3) no eth0
-
-create_bridge()
-{
-    nm=$1
-    shift
-    ports=$@
-
-    touch "/etc/network/interfaces.d/$nm"
-    for port in $ports; do
-	cat <<-EOF >>"/etc/network/interfaces.d/$nm"
-		iface $port
-		    bridge-access 1
-		    post-up ip link set $port group port
-		EOF
-    done
-    cat <<-EOF >> "/etc/network/interfaces.d/$nm"
-
-	auto $nm
-	iface $nm
-	    bridge-ports $ports
-	    bridge-vlan-aware yes
-	    bridge-stp on
-	    bridge-vids 1
-
-	auto vlan1
-	iface vlan1 inet dhcp
-	    vlan-id 1
-	    vlan-raw-device $nm
-	    post-up ip link set vlan1 group iface
-	EOF
-    ip link set vlan1 group iface
-}
-
-# Check if already set up
-[ -z "$(ls -A /etc/network/interfaces.d/)" ] || exit 0
-
-# Check for custom hostname from Qemu/Qeneth
-nm=$(cat /sys/firmware/qemu_fw_cfg/by_name/opt/hostname/raw)
-if [ -n "$nm" ]; then
-    hostnm "$nm"
-fi
-
-# need to check for 'length > 0' because ip command
-# outputs empty json objects for non-port group ifs
-ports=$(ip -json link show group port | jq -r '.[].ifname | select(length > 0)' | tr "\n" " ")
-if [ -n "$ports" ]; then
-    create_bridge br0 $ports
-else
-    ifaces=$(ip -json addr show  |jq -r '.[] | select(.link_type=="ether").ifname')
-    for iface in $ifaces; do
-	cat  <<-EOF > "/etc/network/interfaces.d/$iface"
-		auto $iface
-		iface $iface inet dhcp
-		    pre-up ip link set $iface group iface
-		EOF
-    done
-fi

board/common/Config.in

@@ -1,10 +1,7 @@
-menuconfig SIGN_ENABLED
-	bool "Image Signing"
-	default y
+comment "Image Signing"
 
 choice
 	prompt "Signing key source"
-	depends on SIGN_ENABLED
 	default SIGN_SRC_DIR
 
 config SIGN_SRC_DIR
@@ -17,9 +14,10 @@ endchoice
 
 config SIGN_KEY
 	string "Signing key"
-	depends on SIGN_ENABLED
 	default "${BR2_EXTERNAL_INFIX_PATH}/board/common/dev-key" if SIGN_SRC_DIR
 
+comment "Additional Artifacts"
+
 menuconfig DISK_IMAGE
 	bool "Disk image"
 	help
@@ -36,15 +34,13 @@ config DISK_IMAGE_SIZE
 	depends on DISK_IMAGE
 	default "512M"
 	help
-	  Create a disk image of this size.  A K/M/G suffix may be used
-	  to multiply by powers of 1024.  Suffixes like KB/MB/GB may be
-	  used to multiply by powers of 1000.  The image will be split
-	  proportionally to fit the two rootfs, a kernel, a writable
-	  /cfg and /var partiotions.
+	  Create a disk image of this size. Suffixes like K/M/G may be
+	  used to multiply by powers of 1024. Suffixes like KB/MB/GB may
+	  be used to multiply by powers of 1000.
 
 	  Minimum supported size is 512M.
 
-menuconfig GNS3_APPLIANCE
+config GNS3_APPLIANCE
 	bool "GNS3 Appliance"
 	select DISK_IMAGE
 	default y if BR2_x86_64
@@ -52,22 +48,6 @@ menuconfig GNS3_APPLIANCE
 	  Create a GNS3 appliance description that, together with the
 	  disk image, can be imported into GNS3.
 
-config GNS3_APPLIANCE_RAM
-	int "Reserved RAM (MiB)"
-	depends on GNS3_APPLIANCE
-	default "192"
-	help
-	  Amount of host RAM reserved for an appliance instance.
-
-	  Minimum supported size is 192M.
-
-config GNS3_APPLIANCE_IFNUM
-	int "Number of interfaces"
-	depends on GNS3_APPLIANCE
-	default "1"
-	help
-	  Number of Ethernet interfaces to create for an appliance instance.
-
 menuconfig FIT_IMAGE
 	bool "Traditional FIT image"
 	help

board/common/mkdisk.sh

@@ -17,6 +17,7 @@ size2int()
 
 dimension()
 {
+
     if [ $total -ge $((4 << G)) ]; then
 	bootsize=$(( 8 << M))
 	auxsize=$((  8 << M))
@@ -160,24 +161,24 @@ cp -f $BINARIES_DIR/rootfs.itbh $root/aux/secondary.itbh
 
 case "$arch" in
     aarch64)
-	mkenvimage -s 0x4000 -o "$root/aux/uboot.env" \
-		   "$BR2_EXTERNAL_INFIX_PATH/board/common/uboot/aux-env.txt"
+	mkenvimage -s 0x4000 -o $root/aux/uboot.env \
+		   $BR2_EXTERNAL_INFIX_PATH/board/common/uboot/aux-env.txt
 	;;
     x86_64)
-	mkdir -p "$root/aux/grub"
-	cp -f "$BR2_EXTERNAL_INFIX_PATH/board/$arch/grub.cfg" \
-	      "$BR2_EXTERNAL_INFIX_PATH/board/$arch/grubenv"  \
-	      "$root/aux/grub/"
+	mkdir -p $root/aux/grub
+	cp -f $BR2_EXTERNAL_INFIX_PATH/board/amd64/grub.cfg \
+	      $BR2_EXTERNAL_INFIX_PATH/board/amd64/grubenv  \
+	   $root/aux/grub/
 	;;
     *)
 	;;
 esac
 
-rm -rf "$tmp"
+rm -rf $tmp
 
 genimage \
-    --rootpath "$root" \
-    --tmppath  "$tmp" \
-    --inputpath "$BINARIES_DIR" \
-    --outputpath "$BINARIES_DIR" \
-    --config "$root/genimage.cfg"
+    --rootpath $root \
+    --tmppath  $tmp \
+    --inputpath $BINARIES_DIR \
+    --outputpath $BINARIES_DIR \
+    --config $root/genimage.cfg

board/common/mkgns3a.sh

@@ -1,16 +1,8 @@
 #!/bin/sh
 
-if [ -n "$INFIX_RELEASE" ]; then
-    rel="-${INFIX_RELEASE}"
-fi
-
-NM="${1:-custom}${rel}"
-RAM=${2:-512}
-IFNUM=${3:-1}
-
-cat <<EOF >"$BINARIES_DIR/${NM}.gns3a"
+cat <<EOF >"$BINARIES_DIR/infix.gns3a"
 {
-    "name": "$NM",
+    "name": "infix",
     "category": "router",
     "description": "Infix is a Network Operating System based on Linux.  It can be set up both as a switch, with offloading using switchdev, and a router with firewalling.",
     "vendor_name": "KernelKit",
@@ -20,13 +12,13 @@ cat <<EOF >"$BINARIES_DIR/${NM}.gns3a"
     "status": "stable",
     "maintainer": "KernelKit",
     "maintainer_email": "kernelkit@googlegroups.com",
-    "usage": "Default console login is 'root', no password.  For remote login, default user/pass: admin/admin also works.\n\nType 'help' for an overview of commands and relevant configuration files.\n\nThe /etc directory is writable, use the passwd tool after login as part of your set up.\nFor networking, classify interfaces as switchports with /etc/mactab, syntax: 'MAC-address  eN', where N is the port number (1-MAX).\nTo set up bridging and management interfaces, use /etc/network/interfaces, and /etc/network/interfaces.d/",
+    "usage": "Default login is 'root', no password.\n\nType 'help' for an overview of commands and relevant configuration files.\n\nThe /etc directory is writable, use the passwd tool after login as part of your set up.\nFor networking, classify interfaces as switchports with /etc/mactab, syntax: 'MAC-address  eN', where N is the port number (1-MAX).\nTo set up bridging and management interfaces, use /etc/network/interfaces, and /etc/network/interfaces.d/",
     "port_name_format": "eth{0}",
     "linked_clone": true,
     "qemu": {
         "adapter_type": "virtio-net-pci",
-        "adapters": ${IFNUM},
-        "ram": ${RAM},
+        "adapters": 10,
+        "ram": 512,
         "cpus": 1,
         "hda_disk_interface": "virtio",
         "arch": "x86_64",

board/common/mkrauc.sh

@@ -3,13 +3,9 @@
 set -e
 
 GIT_VERSION=$(git -C $BR2_EXTERNAL_INFIX_PATH describe --always --dirty --tags)
-if [ -n "$INFIX_RELEASE" ]; then
-    rel="-${INFIX_RELEASE}"
-fi
 
-name=$1${rel}
-arch=$2
-sign=$3
+arch=$1
+sign=$2
 
 crt=$(ls $sign/*.crt)
 key=$(ls $sign/*.key)
@@ -42,7 +38,7 @@ filename=rootfs.img
 hooks=post-install
 EOF
 
-rm -f $BINARIES_DIR/$name.pkg
+rm -f $BINARIES_DIR/infix-$arch.pkg
 
 rauc --cert=$crt --key=$key \
-    bundle $work $BINARIES_DIR/$name.pkg
+    bundle $work $BINARIES_DIR/infix-$arch.pkg

board/common/post-build.sh

@@ -1,53 +1,21 @@
 #!/bin/sh
-# shellcheck disable=SC1090,SC1091
-. "$BR2_CONFIG" 2>/dev/null
-. "$TARGET_DIR/usr/lib/os-release"
 
-if [ -n "${ID_LIKE}" ]; then
-    ID="${ID} ${ID_LIKE}"
-fi
-
-GIT_VERSION=$(git -C "$BR2_EXTERNAL_INFIX_PATH" describe --always --dirty --tags)
+GIT_VERSION=$(git -C $BR2_EXTERNAL_INFIX_PATH describe --always --dirty --tags)
 
 # This is a symlink to /usr/lib/os-release, so we remove this to keep
 # original Buildroot information.
-rm -f "$TARGET_DIR/etc/os-release"
+rm "$TARGET_DIR/etc/os-release"
 {
-    echo "NAME=\"Infix\""
-    echo "VERSION=${GIT_VERSION}"
-    echo "ID=infix"
-    echo "ID_LIKE=\"${ID}\""
-    echo "VERSION_ID=${GIT_VERSION}"
-    echo "BUILD_ID=\"${NAME} ${VERSION}\""
-    echo "PRETTY_NAME=\"Infix by KernelKit\""
-    if [ "$INFIX_VARIANT_NETCONF" = "y" ]; then
-	echo "VARIANT=\"Managed NETCONF\""
-	echo "VARIANT_ID=netconf"
-    else
-	echo "VARIANT=\"Classic, writable /etc\""
-	echo "VARIANT_ID=classic"
-    fi
-    echo "ARCHITECTURE=\"${INFIX_ARCH}\""
-    echo "HOME_URL=https://github.com/KernelKit"
+	echo "NAME=\"Infix\""
+	echo "VERSION=${GIT_VERSION}"
+	echo "ID=infix"
+	echo "VERSION_ID=${GIT_VERSION}"
+	echo "PRETTY_NAME=\"Infix by KernelKit\""
+	echo "HOME_URL=https://github.com/KernelKit"
 } > "$TARGET_DIR/etc/os-release"
 
-
 echo "Infix by KernelKit $GIT_VERSION -- $(date +"%b %e %H:%M %Z %Y")" > "$TARGET_DIR/etc/version"
 
-# Allow pdmenu (setup) and bash to be a login shells, bash
-# is added automatically when selected in menuyconfig, but
-# not when BusyBox provides a symlink (for ash).
+# Allow pdmenu (setup) to be a login shell
 grep -qsE '^/usr/bin/pdmenu$$' "$TARGET_DIR/etc/shells" \
         || echo "/usr/bin/pdmenu" >> "$TARGET_DIR/etc/shells"
-grep -qsE '^/bin/bash$$' "$TARGET_DIR/etc/shells" \
-        || echo "/bin/bash" >> "$TARGET_DIR/etc/shells"
-
-# Menuconfig support for modifying Qemu args in release tarballs
-cp "$BR2_EXTERNAL_INFIX_PATH/board/common/qemu/qemu.sh" "$BINARIES_DIR/"
-sed "s/default QEMU_aarch64/default QEMU_$BR2_ARCH/" \
-    < "$BR2_EXTERNAL_INFIX_PATH/board/common/qemu/Config.in" \
-    > "$BINARIES_DIR/Config.in"
-rm -f "$BINARIES_DIR/qemu.cfg"
-CONFIG_="CONFIG_" BR2_CONFIG="$BINARIES_DIR/qemu.cfg" \
-       "$O/build/buildroot-config/conf" --olddefconfig "$BINARIES_DIR/Config.in"
-rm -f "$BINARIES_DIR/qemu.cfg.old" "$BINARIES_DIR/.config.old"

board/common/post-image.sh

@@ -1,44 +1,29 @@
 #!/bin/sh
+
 common=$(dirname "$(readlink -f "$0")")
 . $common/lib.sh
 
-load_cfg BR2_DEFCONFIG
 load_cfg BR2_EXTERNAL_INFIX_PATH
-NAME=infix-$(basename "$BR2_DEFCONFIG" _defconfig | tr _ - | sed 's/x86-64/x86_64/')
 
-ver()
-{
-    if [ -n "$INFIX_RELEASE" ]; then
-	printf -- "-%s" "$INFIX_RELEASE"
-	return
-    fi
-}
+load_cfg BR2_ARCH
+load_cfg SIGN_KEY
 
-load_cfg SIGN_ENABLED
-if [ "$SIGN_ENABLED" = "y" ]; then
-    load_cfg BR2_ARCH
-    load_cfg SIGN_KEY
+ixmsg "Signing SquashFS Image"
+$common/sign.sh $BR2_ARCH $SIGN_KEY
 
-    ixmsg "Signing SquashFS Image"
-    $common/sign.sh $BR2_ARCH $SIGN_KEY
-
-    ixmsg "Creating RAUC Update Bundle"
-    $common/mkrauc.sh $NAME $BR2_ARCH $SIGN_KEY
-fi
+ixmsg "Creating RAUC Update Bundle"
+$common/mkrauc.sh $BR2_ARCH $SIGN_KEY
 
 load_cfg DISK_IMAGE
-load_cfg DISK_IMAGE_SIZE
 if [ "$DISK_IMAGE" = "y" ]; then
     ixmsg "Creating Disk Image"
-    $common/mkdisk.sh -a $BR2_ARCH -s $DISK_IMAGE_SIZE
+    $common/mkdisk.sh -a $BR2_ARCH
 fi
 
 load_cfg GNS3_APPLIANCE
 if [ "$GNS3_APPLIANCE" = "y" ]; then
-    load_cfg GNS3_APPLIANCE_RAM
-    load_cfg GNS3_APPLIANCE_IFNUM
-    ixmsg "Creating GNS3 Appliance, $GNS3_APPLIANCE_RAM MiB with $GNS3_APPLIANCE_IFNUM ports"
-    $common/mkgns3a.sh $NAME $GNS3_APPLIANCE_RAM $GNS3_APPLIANCE_IFNUM
+    ixmsg "Creating GNS3 Appliance"
+    $common/mkgns3a.sh
 fi
 
 load_cfg FIT_IMAGE
@@ -46,13 +31,3 @@ if [ "$FIT_IMAGE" = "y" ]; then
     ixmsg "Creating Traditional FIT Image"
     $common/mkfit.sh
 fi
-
-if [ -z "${NAME##*minimal*}" ]; then
-    NAME=$(echo "$NAME" | sed 's/-minimal//')
-fi
-
-rel=$(ver)
-ln -sf rootfs.squashfs "$BINARIES_DIR/${NAME}${rel}.img"
-if [ -n "$rel" ]; then
-    ln -sf "$BINARIES_DIR/${NAME}${rel}.img" "$BINARIES_DIR/${NAME}.img"
-fi

board/common/qemu/qemu.sh

@@ -1,294 +0,0 @@
-#!/bin/sh
-# This script can be used to start an Infix OS image in Qemu.  It reads
-# either a .config, generated from Config.in, or qemu.cfg from a release
-# tarball, for the required configuration data.
-#
-# Debian/Ubuntu users can change the configuration post-release, install
-# the kconfig-frontends package:
-#
-#    sudo apt install kconfig-frontends
-#
-# and then call this script with:
-#
-#    ./qemu.sh -c
-#
-# To bring up a menuconfig dialog.  Select `Exit` and save the changes.
-# For more help, see:_
-#
-#    ./qemu.sh -h
-#
-
-# Local variables
-prognm=$(basename "$0")
-
-usage()
-{
-    echo "usage: $prognm [opts]"
-    echo
-    echo " -c    Run menuconfig to change Qemu settings"
-    echo " -h    This help text"
-    echo
-    echo "Note: 'kconfig-frontends' package (Debian/Ubuntu) must be installed"
-    echo "      for -c to work: sudo apt install kconfig-frontents"
-
-    exit 1
-}
-
-die()
-{
-    echo "$@" >&2
-    exit 1
-}
-
-load_qemucfg()
-{
-    local tmp=$(mktemp -p /tmp)
-
-    grep ^CONFIG_QEMU_ $1 >$tmp
-    .  $tmp
-    rm $tmp
-
-    [ "$CONFIG_QEMU_MACHINE" ] || die "Missing QEMU_MACHINE"
-    [ "$CONFIG_QEMU_ROOTFS"  ] || die "Missing QEMU_ROOTFS"
-
-    [ "$CONFIG_QEMU_KERNEL" -a "$CONFIG_QEMU_BIOS" ] \
-	&& die "QEMU_KERNEL conflicts with QEMU_BIOS"
-
-    [ ! "$CONFIG_QEMU_KERNEL" -a ! "$CONFIG_QEMU_BIOS" ] \
-	&& die "QEMU_KERNEL or QEMU_BIOS must be set"
-}
-
-loader_args()
-{
-    if [ "$CONFIG_QEMU_BIOS" ]; then
-	echo -n "-bios $CONFIG_QEMU_BIOS "
-    elif [ "$CONFIG_QEMU_KERNEL" ]; then
-	echo -n "-kernel $CONFIG_QEMU_KERNEL "
-    fi
-}
-
-append_args()
-{
-# Disabled, not needed anymore with virtconsole (hvc0)
-#    [ "$CONFIG_QEMU_CONSOLE" ] && echo -n "console=$CONFIG_QEMU_CONSOLE "
-
-    echo -n "console=hvc0 "
-    if [ "$CONFIG_QEMU_ROOTFS_INITRD" = "y" ]; then
-	# Size of initrd, rounded up to nearest kb
-	local size=$((($(stat -c %s $CONFIG_QEMU_ROOTFS) + 1023) >> 10))
-	echo -n "root=/dev/ram ramdisk_size=${size} "
-    elif [ "$CONFIG_QEMU_ROOTFS_VSCSI" = "y" ]; then
-	echo -n "root=PARTLABEL=primary "
-    fi
-
-    if [ "$V" != "1" ]; then
-	echo -n "quiet "
-    else
-	echo -n "debug "
-    fi
-
-    echo -n "${QEMU_APPEND} ${QEMU_EXTRA_APPEND} "
-}
-
-rootfs_args()
-{
-    if [ "$CONFIG_QEMU_ROOTFS_INITRD" = "y" ]; then
-	echo -n "-initrd $CONFIG_QEMU_ROOTFS "
-    elif [ "$CONFIG_QEMU_ROOTFS_MMC" = "y" ]; then
-	echo -n "-device sdhci-pci "
-	echo -n "-device sd-card,drive=mmc "
-	echo -n "-drive id=mmc,file=$CONFIG_QEMU_ROOTFS,if=none,format=raw "
-    elif [ "$CONFIG_QEMU_ROOTFS_VSCSI" = "y" ]; then
-	echo -n "-drive file=$CONFIG_QEMU_ROOTFS,if=virtio,format=raw,bus=0,unit=0 "
-    fi
-}
-
-rw_args()
-{
-    [ "$CONFIG_QEMU_RW" ] || return
-
-    if ! [ -f "$CONFIG_QEMU_RW" ]; then
-	dd if=/dev/zero of="$CONFIG_QEMU_RW" bs=16M count=1 >/dev/null 2>&1
-	mkfs.ext4 -L cfg "$CONFIG_QEMU_RW" >/dev/null 2>&1
-    fi
-
-    echo -n "-drive file=$CONFIG_QEMU_RW,if=virtio,format=raw,bus=0,unit=1 "
-
-    if [ "$CONFIG_QEMU_RW_VAR_OPT" ]; then
-	if ! [ -f "$CONFIG_QEMU_RW_VAR" ]; then
-	    dd if=/dev/zero of="$CONFIG_QEMU_RW_VAR" bs=256M count=1 >/dev/null 2>&1
-	    mkfs.ext4 -L var "$CONFIG_QEMU_RW_VAR" >/dev/null 2>&1
-	fi
-
-	echo -n "-drive file=$CONFIG_QEMU_RW_VAR,if=virtio,format=raw,bus=0,unit=2 "
-    fi
-}
-
-host_args()
-{
-    [ "${QEMU_HOST}" ] || return
-
-    echo -n "-virtfs local,path=${QEMU_HOST},security_model=none,writeout=immediate,mount_tag=hostfs "
-}
-
-net_args()
-{
-    QEMU_NET_MODEL=${QEMU_NET_MODEL:-virtio}
-
-    if [ "$CONFIG_QEMU_NET_BRIDGE" = "y" ]; then
-	QEMU_NET_BRIDGE_DEV=${QEMU_NET_BRIDGE_DEV:-virbr0}
-	echo -n "-nic bridge,br=$CONFIG_QEMU_NET_BRIDGE_DEV,model=$CONFIG_QEMU_NET_MODEL "
-    elif [ "$CONFIG_QEMU_NET_TAP" = "y" ]; then
-	QEMU_NET_TAP_N=${QEMU_NET_TAP_N:-1}
-	mactab=$(dirname "$CONFIG_QEMU_ROOTFS")/mactab
-	rm -f "$mactab"
-	for i in $(seq 0 $(($CONFIG_QEMU_NET_TAP_N - 1))); do
-	    printf "e$i	52:54:00:12:34:%02x\n" $((0x56 + i)) >>"$mactab"
-	    echo -n "-netdev tap,id=nd$i,ifname=qtap$i -device e1000,netdev=nd$i "
-	done
-	echo -n "-fw_cfg name=opt/mactab,file=$mactab "
-    elif [ "$CONFIG_QEMU_NET_USER" = "y" ]; then
-	[ "$CONFIG_QEMU_NET_USER_OPTS" ] && QEMU_NET_USER_OPTS="$CONFIG_QEMU_NET_USER_OPTS,"
-
-	echo -n "-nic user,${QEMU_NET_USER_OPTS}model=$CONFIG_QEMU_NET_MODEL "
-    else
-	echo -n "-nic none"
-    fi
-}
-
-wdt_args()
-{
-    echo -n "-device i6300esb -rtc clock=host"
-}
-
-run_qemu()
-{
-    local qemu
-    read qemu <<EOF
-	$CONFIG_QEMU_MACHINE \
-	  -display none -rtc base=utc,clock=vm \
-	  -device virtio-serial -chardev stdio,mux=on,id=console0 \
-	  -device virtconsole,chardev=console0 -mon chardev=console0 \
-	  -chardev socket,id=gdbserver,path=gdbserver.sock,server=on,wait=off \
-	  -device virtconsole,name=console1,chardev=gdbserver \
-	  $(loader_args) \
-	  $(rootfs_args) \
-	  $(rw_args) \
-	  $(host_args) \
-	  $(net_args) \
-	  $(wdt_args) \
-	  $CONFIG_QEMU_EXTRA
-EOF
-
-    if [ "$CONFIG_QEMU_KERNEL" ]; then
-	$qemu -append "$(append_args)" "$@"
-    else
-	$qemu "$@"
-    fi
-}
-
-dtb_args()
-{
-    [ "$CONFIG_QEMU_LOADER_UBOOT" ] || return
-
-    if [ "$CONFIG_QEMU_DTB_EXTEND" ]; then
-	# On the current architecture, QEMU will generate an internal
-	# DT based on the system configuration.
-
-	# So we extract a copy of that
-	run_qemu -M dumpdtb=qemu.dtb >/dev/null 2>&1
-
-	# Extend it with the environment and signing information in
-	# u-boot.dtb.
-	echo "qemu.dtb u-boot.dtb" | \
-	    xargs -n 1 dtc -I dtb -O dts | \
-	    { echo "/dts-v1/;"; sed  -e 's:/dts-v[0-9]\+/;::'; } | \
-	    dtc >qemu-extended.dtb 2>/dev/null
-
-	# And use the combined result to start the instance
-	echo -n "-dtb qemu-extended.dtb "
-    else
-	# Otherwise we just use the unmodified one
-	echo -n "-dtb u-boot.dtb "
-    fi
-}
-
-generate_dot()
-{
-    [ "$CONFIG_QEMU_NET_TAP" = "y" ] || return
-
-    hostports="<qtap0> qtap0"
-    targetports="<e0> e0"
-    edges="host:qtap0 -- target:e0;"
-    for tap in $(seq 1 $(($CONFIG_QEMU_NET_TAP_N - 1))); do
-	hostports="$hostports | <qtap$tap> qtap$tap "
-	targetports="$targetports | <e$tap> e$tap "
-	edges="$edges host:qtap$tap -- target:e$tap;"
-    done
-    cat >qemu.dot <<EOF
-graph "qemu" {
-	layout="neato";
-	overlap="false";
-	esep="+20";
-
-        node [shape=record, fontname="monospace"];
-	edge [color="cornflowerblue", penwidth="2"];
-
-	host [
-	    label="host | { $hostports }"
-	    pos="0,0!",
-
-	    kind="controller",
-	];
-
-        target [
-	    label="{ $targetports } | target",
-	    pos="10,0!",
-
-	    kind="infix",
-	];
-
-	$edges
-}
-EOF
-}
-
-menuconfig()
-{
-    grep -q QEMU_MACHINE Config.in || die "$prognm: must be run from the output/images directory"
-    command -v kconfig-mconf >/dev/null || die "$prognm: cannot find kconfig-mconf for menuconfig"
-    exec kconfig-mconf Config.in
-}
-
-cd $(dirname $(readlink -f "$0"))
-
-while [ "$1" != "" ]; do
-    case $1 in
-	-c)
-	    menuconfig
-	    ;;
-	-h)
-	    usage
-	    ;;
-	*)
-	    break
-    esac
-    shift
-done
-
-if [ -f .config ]; then
-    # Customized settings from 'qemu.sh -c'
-    load_qemucfg .config
-else
-    # Shipped defaults from release tarball
-    load_qemucfg qemu.cfg
-fi
-
-generate_dot
-
-echo "Starting Qemu  ::  Ctrl-a x -- exit | Ctrl-a c -- toggle console/monitor"
-line=$(stty -g)
-stty raw
-run_qemu $(dtb_args)
-stty "$line"
-

board/common/rootfs/bin/chom

@@ -0,0 +1,116 @@
+#!/bin/sh
+#set -x
+
+mode=/mnt/cfg/infix/.use_etc
+boot=/tmp/.boot_mode
+if [ -f $boot ]; then
+    current=$(cat $boot)
+else
+    current="unknown"
+fi
+m=on
+n=off
+p=off
+
+select_mode()
+{
+    if [ -f $mode ]; then
+	m=off
+	if grep -qi profinet $boot; then
+	    n=off
+	    p=on
+	else
+	    n=on
+	    p=off
+	fi
+    fi
+
+    exec 3>&1
+    selection=$(dialog --erase-on-exit --no-tags \
+		    --hline "Arrow keys + space to select, enter to confirm" \
+		    --backtitle "Select Operating Mode" \
+		    --title "Select Operating Mode" \
+		    --radiolist "System currently runs in: $current mode" 13 60 1 \
+		    "1" "Managed NETCONF, XML datastore" "$m" \
+		    "2" "Native Linux, /etc datastore"   "$n" \
+		    "3" "PROFINET, /etc variant"         "$p" \
+		    2>&1 1>&3)
+    exit_status=$?
+    exec 3>&-
+    case $exit_status in
+	1)			# cancel
+	    exit 0
+	    ;;
+	255)			# escape
+	    exit 1
+	    ;;
+    esac
+}
+
+usage()
+{
+    cat <<EOF
+usage:
+  chom [-h] [etc | netconf]
+
+options:
+  -h            Show this help text
+
+arguments:
+  etc           Change to Linux native mode, /etc
+  netconf       Change to NETCONF mode, XML
+  profinet      Change to PROFINET mode, /etc variant
+
+EOF
+}
+
+case $1 in
+    -h)
+	usage
+	exit 0
+	;;
+    net* | xml)
+	selection=1
+	;;
+    nat* | etc*)
+	selection=2
+	;;
+    profinet)
+	selection=3
+	;;
+    *)
+	;;
+esac
+
+if [ -z "$selection" ]; then
+    use_dialog=1
+    select_mode
+fi
+
+case $selection in
+    1)
+	rm -f $mode 2>/dev/null
+	grep -qi netconf $boot 2>/dev/null && exit 0
+	result="Manageed NETCONF"
+	;;
+    2)
+	echo "native /etc" > $mode
+	grep -qi native $boot  2>/dev/null && exit 0
+	result="Native Linux, /etc"
+	;;
+    3)
+	echo "PROFINET" > $mode
+	grep -qi profinet $boot  2>/dev/null && exit 0
+	result="PROFINET"
+	;;
+esac
+
+if [ -n "$use_dialog" ]; then
+    dialog --erase-on-exit --cr-wrap --title "Activate Mode Change?" --yesno "\n   Reboot to $result mode now?" 8 50
+    if [ $? -eq 0 ]; then
+	reboot
+    fi
+fi
+
+echo "Remember to reboot later to activate the change."
+exit 0

board/common/rootfs/bin/show

@@ -215,10 +215,10 @@ system()
 {
 	h1 "SYSTEM INFORMATION"
 	echo "System Name        : $(uname -n)"
-	echo "System Variant     : $VARIANT"
+	echo "System Boot Mode   : $(cat /tmp/.boot_mode)"
 	echo "System Description : $PRETTY_NAME"
 	echo "System Contact     : $HOME_URL"
-	echo "System Timezone    : $(cat /etc/timezone)"
+	echo "System Timezone    : $TZ"
 	echo "System Type        : $NAME"
 	echo "System Version     : $(cat /etc/version)"
 	echo "System Arch        : $(uname -m)"

board/common/rootfs/etc/auto-factory.d/10-system.json

@@ -1,5 +0,0 @@
-{
-    "ietf-system:system": {
-	"hostname": "infix"
-    }
-}

board/common/rootfs/etc/bash.bashrc

@@ -3,13 +3,6 @@
 # If not running interactively, don't do anything
 [ -z "$PS1" ] && return
 
-# Reevaluate for each line, in case hostname changes
-function prompt_command
-{
-    PS1="\u@$(hostname):\w\$ "
-}
-export PROMPT_COMMAND=prompt_command
-
 # check the window size after each command and, if necessary,
 # update the values of LINES and COLUMNS.
 shopt -s checkwinsize

board/common/rootfs/etc/containers/registries.conf

@@ -1,77 +0,0 @@
-# For more information on this configuration file, see containers-registries.conf(5).
-#
-# NOTE: RISK OF USING UNQUALIFIED IMAGE NAMES
-# We recommend always using fully qualified image names including the registry
-# server (full dns name), namespace, image name, and tag
-# (e.g., registry.redhat.io/ubi8/ubi:latest). Pulling by digest (i.e.,
-# quay.io/repository/name@digest) further eliminates the ambiguity of tags.
-# When using short names, there is always an inherent risk that the image being
-# pulled could be spoofed. For example, a user wants to pull an image named
-# `foobar` from a registry and expects it to come from myregistry.com. If
-# myregistry.com is not first in the search list, an attacker could place a
-# different `foobar` image at a registry earlier in the search list. The user
-# would accidentally pull and run the attacker's image and code rather than the
-# intended content. We recommend only adding registries which are completely
-# trusted (i.e., registries which don't allow unknown or anonymous users to
-# create accounts with arbitrary names). This will prevent an image from being
-# spoofed, squatted or otherwise made insecure.  If it is necessary to use one
-# of these registries, it should be added at the end of the list.
-#
-# # An array of host[:port] registries to try when pulling an unqualified image, in order.
-# unqualified-search-registries = ["example.com"]
-#
-# [[registry]]
-# # The "prefix" field is used to choose the relevant [[registry]] TOML table;
-# # (only) the TOML table with the longest match for the input image name
-# # (taking into account namespace/repo/tag/digest separators) is used.
-# # 
-# # The prefix can also be of the form: *.example.com for wildcard subdomain
-# # matching.
-# #
-# # If the prefix field is missing, it defaults to be the same as the "location" field.
-# prefix = "example.com/foo"
-#
-# # If true, unencrypted HTTP as well as TLS connections with untrusted
-# # certificates are allowed.
-# insecure = false
-#
-# # If true, pulling images with matching names is forbidden.
-# blocked = false
-#
-# # The physical location of the "prefix"-rooted namespace.
-# #
-# # By default, this is equal to "prefix" (in which case "prefix" can be omitted
-# # and the [[registry]] TOML table can only specify "location").
-# #
-# # Example: Given
-# #   prefix = "example.com/foo"
-# #   location = "internal-registry-for-example.net/bar"
-# # requests for the image example.com/foo/myimage:latest will actually work with the
-# # internal-registry-for-example.net/bar/myimage:latest image.
-#
-# # The location can be empty iff prefix is in a
-# # wildcarded format: "*.example.com". In this case, the input reference will
-# # be used as-is without any rewrite.
-# location = internal-registry-for-example.com/bar"
-#
-# # (Possibly-partial) mirrors for the "prefix"-rooted namespace.
-# #
-# # The mirrors are attempted in the specified order; the first one that can be
-# # contacted and contains the image will be used (and if none of the mirrors contains the image,
-# # the primary location specified by the "registry.location" field, or using the unmodified
-# # user-specified reference, is tried last).
-# #
-# # Each TOML table in the "mirror" array can contain the following fields, with the same semantics
-# # as if specified in the [[registry]] TOML table directly:
-# # - location
-# # - insecure
-# [[registry.mirror]]
-# location = "example-mirror-0.local/mirror-for-foo"
-# [[registry.mirror]]
-# location = "example-mirror-1.local/mirrors/foo"
-# insecure = true
-# # Given the above, a pull of example.com/foo/image:latest will try:
-# # 1. example-mirror-0.local/mirror-for-foo/image:latest
-# # 2. example-mirror-1.local/mirrors/foo/image:latest
-# # 3. internal-registry-for-example.net/bar/image:latest
-# # in order, and use the first one that exists.

board/common/rootfs/etc/containers/registries.conf.d/shortnames.conf

@@ -1,78 +0,0 @@
-[aliases]
-  # almalinux
-  "almalinux" = "docker.io/library/almalinux"
-  "almalinux-minimal" = "docker.io/library/almalinux-minimal"
-  # centos
-  "centos" = "quay.io/centos/centos"
-  # containers
-  "skopeo" = "quay.io/skopeo/stable"
-  "buildah" = "quay.io/buildah/stable"
-  "podman" = "quay.io/podman/stable"
-  # docker
-  "alpine" = "docker.io/library/alpine"
-  "docker" = "docker.io/library/docker"
-  "registry" = "docker.io/library/registry"
-  "hello-world" = "docker.io/library/hello-world"
-  "swarm" = "docker.io/library/swarm"
-  # Fedora
-  "fedora-minimal" = "registry.fedoraproject.org/fedora-minimal"
-  "fedora" = "registry.fedoraproject.org/fedora"
-  # openSUSE
-  "opensuse/tumbleweed" = "registry.opensuse.org/opensuse/tumbleweed"
-  "opensuse/tumbleweed-dnf" = "registry.opensuse.org/opensuse/tumbleweed-dnf"
-  "opensuse/tumbleweed-microdnf" = "registry.opensuse.org/opensuse/tumbleweed-microdnf"
-  "opensuse/leap" = "registry.opensuse.org/opensuse/leap"
-  "opensuse/busybox" = "registry.opensuse.org/opensuse/busybox"
-  "tumbleweed" = "registry.opensuse.org/opensuse/tumbleweed"
-  "tumbleweed-dnf" = "registry.opensuse.org/opensuse/tumbleweed-dnf"
-  "tumbleweed-microdnf" = "registry.opensuse.org/opensuse/tumbleweed-microdnf"
-  "leap" = "registry.opensuse.org/opensuse/leap"
-  "leap-dnf" = "registry.opensuse.org/opensuse/leap-dnf"
-  "leap-microdnf" = "registry.opensuse.org/opensuse/leap-microdnf"
-  "tw-busybox" = "registry.opensuse.org/opensuse/busybox"
-  # SUSE
-  "suse/sle15" = "registry.suse.com/suse/sle15"
-  "suse/sles12sp5" = "registry.suse.com/suse/sles12sp5"
-  "suse/sles12sp4" = "registry.suse.com/suse/sles12sp4"
-  "suse/sles12sp3" = "registry.suse.com/suse/sles12sp3"
-  "sle15" = "registry.suse.com/suse/sle15"
-  "sles12sp5" = "registry.suse.com/suse/sles12sp5"
-  "sles12sp4" = "registry.suse.com/suse/sles12sp4"
-  "sles12sp3" = "registry.suse.com/suse/sles12sp3"
-  # Red Hat Enterprise Linux
-  "rhel" = "registry.access.redhat.com/rhel"
-  "rhel6" = "registry.access.redhat.com/rhel6"
-  "rhel7" = "registry.access.redhat.com/rhel7"
-  "ubi7" = "registry.access.redhat.com/ubi7"
-  "ubi7-init" = "registry.access.redhat.com/ubi7-init"
-  "ubi7-minimal" = "registry.access.redhat.com/ubi7-minimal"
-  "ubi8" = "registry.access.redhat.com/ubi8"
-  "ubi8-minimal" = "registry.access.redhat.com/ubi8-minimal"
-  "ubi8-init" = "registry.access.redhat.com/ubi8-init"
-  "ubi8-micro" = "registry.access.redhat.com/ubi8-micro"
-  "ubi8/ubi" = "registry.access.redhat.com/ubi8/ubi"
-  "ubi8/ubi-minimal" = "registry.access.redhat.com/ubi8-minimal"
-  "ubi8/ubi-init" = "registry.access.redhat.com/ubi8-init"
-  "ubi8/ubi-micro" = "registry.access.redhat.com/ubi8-micro"
-  # Rocky Linux
-  "rockylinux" = "docker.io/library/rockylinux"
-  # Debian
-  "debian" = "docker.io/library/debian"
-  # Kali Linux
-  "kali-bleeding-edge" = "docker.io/kalilinux/kali-bleeding-edge"
-  "kali-dev" = "docker.io/kalilinux/kali-dev"
-  "kali-experimental" = "docker.io/kalilinux/kali-experimental"
-  "kali-last-release" = "docker.io/kalilinux/kali-last-release"
-  "kali-rolling" = "docker.io/kalilinux/kali-rolling"
-  # Ubuntu
-  "ubuntu" = "docker.io/library/ubuntu"
-  # Oracle Linux
-  "oraclelinux" = "container-registry.oracle.com/os/oraclelinux"
-  # busybox
-  "busybox" = "docker.io/library/busybox"
-  # php
-  "php" = "docker.io/library/php"
-  # python
-  "python" = "docker.io/library/python"
-  # node
-  "node" = "docker.io/library/node"

board/common/rootfs/etc/dnsmasq.conf

@@ -1,14 +0,0 @@
-# dnsmasq is the system resolver, the file /etc/resolv.conf is
-# managed by openresolv.  DHCP lease, VPN tunnel establishment,
-# and similar events feed servers and configuration to dnsmasq.
-domain-needed
-#interface=lo
-listen-address=127.0.0.1
-enable-dbus
-
-# Generated by openresolv
-resolv-file=/var/lib/misc/resolv.conf
-
-# Include all files in a directory which end in .conf
-conf-dir=/etc/dnsmasq.d/,*.conf
-

board/common/rootfs/etc/finit.conf

@@ -1,2 +1 @@
 set COLORTERM=yes
-runparts /cfg/start.d

board/common/rootfs/etc/finit.d/10-infix.conf

@@ -1,2 +1,2 @@
-run [S] /lib/infix/sysctl-sync-ip-conf --
 run [S] /lib/infix/nameif -- Probing network interfaces
+run if:<!boot/netconf> [S] /lib/infix/swup --

board/common/rootfs/etc/modprobe.d/bonding.conf

@@ -1,2 +0,0 @@
-options bonding max_bonds=0
-

board/common/rootfs/etc/modprobe.d/dummy.conf

@@ -1,2 +0,0 @@
-options dummy numdummies=0
-

board/common/rootfs/etc/pdmenurc

@@ -60,7 +60,8 @@ menu:system:System:System Settings
 	exec:_Enable service:edit:initctl enable ~Enter name of service (filename) to enable:~
 	exec:_Disable service:edit:initctl disable ~Enter name of service (filename) to disable:~
 	nop
-	exec:_Factory Reset::yorn "Factory reset device (reboots), are you sure?" factory -y
+	exec:_Change Operating Mode::chom
+	exec:_Factory Reset::yorn "Reboot and factory reset device, are you sure?" factory -y
 	nop
 	exit:_Main menu..
 

board/common/rootfs/etc/profile.d/convenience.sh

@@ -15,6 +15,5 @@ alias ipb='ip -br'
 alias ipaddr='ip addr'
 alias iplink='ip link'
 alias bridge='bridge --color=auto'
-alias cli='klish'
-
-alias docker=podman
+alias setup='pdmenu; clear'
+alias cli='clixon_cli'

board/common/rootfs/etc/resolvconf.conf

@@ -1,10 +0,0 @@
-# dnsmasq is the system resolver
-name_servers="127.0.0.1"
-
-resolv_conf=/etc/resolv.conf
-resolv_conf_options="edns0 trust-ad"
-
-# dnsmasq specific settings and list of
-# nameservers in non-standard locations
-dnsmasq_conf=/etc/dnsmasq.d/resolvconf.conf
-dnsmasq_resolv=/var/lib/misc/resolv.conf

board/common/rootfs/etc/resolvconf/interface-order

@@ -1 +0,0 @@
-lo

board/common/rootfs/etc/ssh/sshd_config.d/cli.conf

@@ -1 +1 @@
-Subsystem cli /usr/bin/klish
+Subsystem cli /usr/bin/clixon_cli

board/common/rootfs/etc/sysctl.d/bridge-no-filter.conf

@@ -1,4 +0,0 @@
-# https://addiva-elektronik.github.io/2023/03/29/bridge-firewalling/
-net.bridge.bridge-nf-call-ip6tables = 0
-net.bridge.bridge-nf-call-iptables  = 0
-net.bridge.bridge-nf-call-arptables = 0

board/common/rootfs/etc/sysctl.d/forwarding.conf

@@ -1,2 +0,0 @@
-net.ipv4.ip_forward=1
-net.ipv6.conf.all.forwarding=1

board/common/rootfs/etc/sysctl.d/system.conf

@@ -1 +0,0 @@
-net.core.fb_tunnels_only_for_init_net=2

board/common/rootfs/lib/infix/cfg-bootstrap

@@ -1,31 +0,0 @@
-#!/bin/sh
-set -e
-
-PATH=/lib/infix/factory:$PATH
-
-[ "$FACTORY_D" ] || FACTORY_D=/etc/auto-factory.d
-[ "$CFG_D" ]     || CFG_D=/cfg
-[ "$GENCFG_D" ]  || GENCFG_D=/cfg/factory.d
-mkdir -p $GENCFG_D
-
-gen-hostname   >$FACTORY_D/20-auto-hostname.json
-gen-interfaces >$FACTORY_D/20-auto-interfaces.json
-
-[ -s $GENCFG_D/20-auto-hostkey.json ] || gen-hostkeys >$GENCFG_D/20-auto-hostkey.json
-
-# shellcheck disable=SC2046
-jq -s 'reduce .[] as $item ({}; . * $item)' \
-   $(find $FACTORY_D -name '*.json') \
-   $(find $GENCFG_D  -name '*.json') \
-    >$CFG_D/auto-factory-config.cfg
-
-# TODO: Look for statically defined factory-config, based on the
-# system's product ID.
-
-# If we haven't found a better one, settle for auto-factory-config as
-# the system's factory-config.
-[ -h $CFG_D/factory-config.cfg ] || \
-    ln -sf auto-factory-config.cfg $CFG_D/factory-config.cfg
-
-# Bootstrap sysrepo db with all modules required by confd
-sysrepo-bootstrap.sh $CFG_D/factory-config.cfg $CFG_D/startup-config.cfg

board/common/rootfs/lib/infix/clean-etc

@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# This is an unmanaged node, leave /etc as-is
+/lib/infix/use-etc && exit 0
+
+# This is a managed node, ignore all default configuration ...
+# ... except for some core services
+reserved()
+{
+    for svc in clixon getty lldpd nginx sysklogd; do
+	[ "$1" = "${svc}.conf" ] && return 0
+    done
+
+    return 1
+}
+
+for file in /etc/finit.d/enabled/*.conf; do
+    reserved "$(basename "$file")" && continue
+    rm "$file"
+done

board/common/rootfs/lib/infix/factory/gen-hostkeys

@@ -1,30 +0,0 @@
-#!/bin/sh
-
-# generate a new key
-PRIVPEM=$(openssl genpkey -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -outform PEM 2>/dev/null)
-# remove header/footer and newlines
-PRIVKEY=$(echo "$PRIVPEM" | grep -v -- "-----" | tr -d "\n")
-
-# get public key
-PUBPEM=$(echo "$PRIVPEM" | openssl rsa -pubout 2>/dev/null)
-# remove header/footer and newlines
-PUBKEY=$(echo "$PUBPEM" | grep -v -- "-----" | tr -d "\n")
-
-# generate edit config
-cat <<EOF
-{
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "algorithm": "rsa2048",
-          "public-key": "$PUBKEY",
-          "private-key": "$PRIVKEY",
-          "certificates": {}
-        }
-      ]
-    }
-  }
-}
-EOF

board/common/rootfs/lib/infix/factory/gen-hostname

@@ -1,42 +0,0 @@
-#!/bin/sh
-
-set -e
-
-base_mac_lowest_physical()
-{
-    ip -d -j link show | jq -r '
-         .[] |
-         select(.link_type == "ether") |
-         select(has("linkinfo") | not) | .address' \
-    | sort | head -n 1
-}
-
-source_base_mac()
-{
-    # TODO: Source the base MAC from the vital product data memory, if
-    # available.
-    # base_mac=$(base_mac_vpd)
-    # [ "$base_mac" ] && return
-
-    base_mac=$(base_mac_lowest_physical)
-    [ "$base_mac" ] && return
-
-    base_mac=00:00:00:00:00:00
-}
-
-if [ "$1" ]; then
-    sysname="$1"
-else
-    sysname="$(cat /etc/hostname)"
-fi
-
-source_base_mac
-sysname="${sysname}-$(echo $base_mac | tail -c 9 | tr ':' '-')"
-
-cat <<EOF
-{
-  "ietf-system:system": {
-    "hostname": "${sysname}"
-  }
-}
-EOF

board/common/rootfs/lib/infix/factory/gen-interfaces

@@ -1,47 +0,0 @@
-#!/bin/sh
-
-set -e
-
-gen_interface()
-{
-    cat <<EOF
-      ,{
-        "name": "$1",
-        "type": "iana-if-type:ethernetCsmacd",
-        "ietf-ip:ipv6": {
-	  "enabled": true,
-	  "forwarding": false,
-	  "dup-addr-detect-transmits": 1,
-	  "autoconf": {
-	    "create-global-addresses": true
-	  }
-	}
-      }
-EOF
-}
-
-phys_ifaces=$(ip -d -j link show | jq -r '
-	 .[] |
-	 select(.link_type == "ether") |
-	 select(has("linkinfo") | not) |
-	 .ifname')
-
-cat <<EOF
-{
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "lo",
-        "type": "iana-if-type:softwareLoopback",
-        "ietf-ip:ipv4": {
-          "address": [{ "ip": "127.0.0.1", "prefix-length": 8 }]
-        },
-        "ietf-ip:ipv6": {
-          "address": [{ "ip": "::1", "prefix-length": 128 }]
-        }
-      }
-$(for iface in $phys_ifaces; do gen_interface $iface; done)
-    ]
-  }
-}
-EOF

board/common/rootfs/lib/infix/mnt

@@ -1,11 +1,12 @@
 #!/bin/sh
+
 # Called from /etc/fstab to ensure we have something writable mounted
 # at /cfg, /etc, /home, /root, and /var.
 #
 # /mnt/cfg is used to store device modifications made to /etc, /home,
 # /root.
 #
-# /mnt/var is used as the backing store for /var.  If /mnt/var isn't
+# /mnt/var is used as the backins store for /var. If /mnt/var is not
 # available, /mnt/cfg will still be be used to persist /var/lib.
 #
 # If a disk partiion with the corresponding label ("cfg"/"var") is
@@ -13,7 +14,6 @@
 # directories. Otherwise fall back to a tmpfs based RAM disk. This
 # effectively brings up the system with the default configuration, but
 # obviously any subsequent configuration is ephemeral.
-. /etc/os-release
 
 set -e
 
@@ -32,21 +32,6 @@ mount_rw()
     return 1
 }
 
-# Bind mount /var or /var/lib to ensure applications like podman can set
-# up overlay mounts for containers.  Overlays cannot sit on top of other
-# overlays.  We always copy the contents of /var or /var/lib from the
-# rootfs to get updates, e.g., new packages added in an upgrade.
-mount_bind()
-{
-    src="$1"
-    dst="$2"
-
-    mkdir -p "$src"
-    cp -af "$dst/." "$src/" ||:
-
-    mount -o bind "$src" "$dst"
-}
-
 # mkdir -p -m 0755 only applies to the deepest directory
 # shellcheck disable=SC2174
 mount_overlay()
@@ -79,11 +64,7 @@ if ! mount_rw var >/dev/null 2>&1; then
     logger $opt -p user.warn -t "$nm" \
 	   "No persistent storage found for /var, only /var/lib is persisted."
     varsrc=/mnt/tmp
-    vlibsrc=/mnt/cfg/vlib
-else
-    mount_bind "$varsrc" /var
-    varsrc=
-    vlibsrc=
+    vlibsrc=/mnt/cfg
 fi
 
 cfgsrc=/mnt/cfg
@@ -107,8 +88,7 @@ else
 	sync
     fi
 
-    # Check build: NETCONF or Classic
-    if [ "$VARIANT_ID" != "netconf" ]; then
+    if /lib/infix/use-etc; then
 	etcsrc=/mnt/cfg
     fi
 
@@ -121,9 +101,9 @@ mount_overlay cfg  $cfgsrc /cfg
 mount_overlay etc  $etcsrc /etc
 mount_overlay home $cfgsrc /home
 mount_overlay root $cfgsrc /root
+mount_overlay var  $varsrc /var
 
-[ "$varsrc" ]  && mount_overlay var "$varsrc"  /var
-[ "$vlibsrc" ] && mount_bind        "$vlibsrc" /var/lib
+[ "$vlibsrc" ] && mount_overlay vlib "$vlibsrc" /var/lib
 
 # Keep transient configs in a ramdisk and symlink out to /cfg for
 # startup.

board/common/rootfs/lib/infix/prep-db

@@ -0,0 +1,19 @@
+#!/bin/sh
+set -e
+
+FACTORY=/mnt/tmp/infix/db/factory_db
+
+# TODO: Maybe copy in a proper factory config from
+# /usr/share/vendor/<hardware-id>_db or similar.
+# Right now we generate one from probed data.
+cat <<EOF >$FACTORY
+<config>
+<restconf xmlns="http://clicon.org/restconf">
+   <enable>true</enable>
+   <auth-type>none</auth-type>
+   <fcgi-socket>/run/clixon/restconf.sock</fcgi-socket>
+</restconf>
+</config>
+EOF
+
+[ -f /cfg/startup_db ] || cp "$FACTORY" /cfg/startup_db

board/common/rootfs/lib/infix/swup

@@ -0,0 +1,38 @@
+#!/bin/sh
+# Only runs in native /etc and PROFINET nodes.
+
+if initctl cond get boot/profinet; then
+    initctl enable snmpd
+    initctl disable lldpd
+fi
+
+# Factory default: all switch ports in VLAN 1 of br0
+# need to check for 'length > 0' because ip command
+# outputs empty json objects for non-port group ifs
+ports=$(ip -json link show group port | jq -r '.[].ifname | select(length > 0)' | tr "\n" " ")
+[ -f /etc/network/interfaces.d/br0 ] || [ -z "$ports" ] && exit 0
+
+touch /etc/network/interfaces.d/br0
+for port in $ports; do
+    cat <<-EOF >>/etc/network/interfaces.d/br0
+		iface $port
+		    bridge-access 1
+		    post-up ip link set $port group port
+	EOF
+done
+cat <<-EOF >>/etc/network/interfaces.d/br0
+
+	auto br0
+	iface br0
+	    bridge-ports $ports
+	    bridge-vlan-aware yes
+	    bridge-stp on
+	    bridge-vids 1
+
+	auto vlan1
+	iface vlan1 inet dhcp
+	    vlan-id 1
+	    vlan-raw-device br0
+	    post-up ip link set vlan1 group iface
+EOF
+ip link set vlan1 group iface

board/common/rootfs/lib/infix/sysctl-sync-ip-conf

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# When changing default IPv4/6 settings, this does not apply to
-# existing interfaces. This syncs the default settings to all known
-# interfaces at boot, such that physical interfaces will start from
-# the same point as virtual ones.
-
-sysctl net.ipv4.conf.default  >/tmp/sysctl-ip-default
-sysctl net.ipv6.conf.default >>/tmp/sysctl-ip-default
-
-for iface in $(ip -j link show | jq -r .[].ifname); do
-    sed -e "s/.default./.${iface}./g" /tmp/sysctl-ip-default \
-	| sysctl -p -
-done

board/common/rootfs/lib/infix/use-etc

@@ -0,0 +1,21 @@
+#!/bin/sh
+
+if [ -f /mnt/cfg/infix/.use_etc ]; then
+    exit 0
+fi
+
+# Finit's condition system may not yet be bootstrapped when this script
+# is called, e.g., when /etc/fstab is parsed, so we have to manually
+# check for the boot/etc condition.
+awk '
+    $0 == "finit.cond" {
+	cond=1;
+	next;
+    }
+    cond == 1 {
+	use_etc = index($0, "etc") != 0;
+    }
+    END {
+    	exit(use_etc ? 0 : 1);
+    }
+' /proc/1/cmdline

board/common/rootfs/libexec/finit/hook/mount/all/boot-mode.sh

@@ -0,0 +1,26 @@
+#!/bin/sh
+# Override boot mode based on user input from setup tool
+
+set_cond()
+{
+    mkdir -p /run/finit/cond/boot
+    ln -s /run/finit/cond/reconf "/run/finit/cond/boot/$1"
+}
+
+# Report to the setup and show tools the current boot mode
+if /lib/infix/use-etc; then
+    if [ -f /mnt/cfg/infix/.use_etc ]; then
+	cat /mnt/cfg/infix/.use_etc > /tmp/.boot_mode
+	if grep -qi profinet /mnt/cfg/infix/.use_etc; then
+	    set_cond profinet
+	else
+	    set_cond etc
+	fi
+    else
+	echo "native /etc"  > /tmp/.boot_mode
+	set_cond etc
+    fi
+else
+    echo "NETCONF" > /tmp/.boot_mode
+    set_cond netconf
+fi

board/common/rootfs/sbin/dagger

@@ -1,181 +0,0 @@
-#!/bin/sh
-
-set -e
-
-inform()
-{
-    local level="$1"
-    shift
-
-    logger -p "daemon.$level" -t dagger -c $LOGGER_STDOUT "$@"
-}
-
-abort()
-{
-    inform err "Aborting: $*"
-    exit 1
-}
-
-generate_order()
-{
-    [ -f "$1/bottom-up-order" ] && [ -f "$1/top-down-order" ] && return
-
-    # The bottom-up order corresponds to a DFS through the DAG, with
-    # duplicates removed
-    find -L "$1/dag" -depth -mindepth 1 -exec basename {} \; \
-	| awk '!seen[$0]++' \
-	      >"$1/bottom-up-order"
-
-    # The reverse is a valid top-down order
-    sed '1!G;h;$!d' "$1/bottom-up-order" >"$1/top-down-order"
-}
-
-action_exec()
-{
-    local actdir="$2/action/$1"
-    local orderfile="$actdir/order"
-    local code=0
-
-    generate_order "$2"
-
-    if [ ! -r "$orderfile" ]; then
-	orderfile="$2/bottom-up-order"
-	inform warn "No order defined for $actdir, falling back to bottom-up"
-    fi
-
-    local order=$(cat "$orderfile")
-
-    [ -d "$actdir/@pre"  ] && order="@pre $order"
-    [ -d "$actdir/@post" ] && order="$order @post"
-
-    for node in $order; do
-	for work in $(find "$actdir/$node" -type f -executable 2>/dev/null | sort); do
-	    $work >>"$work.log" 2>&1 || code=$?
-	    echo "[exit:$code]" >>"$work.log"
-
-	    [ $code -eq 0 ] || abort "$work failed with exitcode $code"
-	done
-    done
-}
-
-do_exec()
-{
-    local action="$1"
-    local current=
-
-    current=$([ -f "$basedir/current" ] && cat "$basedir/current")
-    [ "$current" ] && [ -d "$basedir/$current" ] \
-	|| abort "Current generation does not exist"
-
-    action_exec "$1" "$basedir/$current"
-}
-
-do_abandon()
-{
-    local next=
-
-    next=$([ -f "$basedir/next" ] && cat "$basedir/next" || true)
-    [ "$next" ] && [ -d "$basedir/$next" ] \
-	|| abort "Next generation does not exist"
-
-    mv "$basedir/$next" "$basedir/$next-ABANDONED-$(date +%F-%T)"
-    rm "$basedir/next"
-    inform info "Abandoned generation $next"
-}
-
-do_evolve()
-{
-    local current=
-    local next=
-
-    current=$([ -f "$basedir/current" ] && cat "$basedir/current" || true)
-    [ ! "$current" ] || [ -d "$basedir/$current" ] \
-	|| abort "Current generation does not exist"
-
-    next=$([ -f "$basedir/next" ] && cat "$basedir/next" || true)
-    [ "$next" ] && [ -d "$basedir/$next" ] \
-	|| abort "Next generation does not exist"
-
-    [ "$current" ] && action_exec exit "$basedir/$current"
-
-    action_exec init "$basedir/$next"
-
-    mv "$basedir/next" "$basedir/current"
-    inform info "Evolved to generation $next"
-}
-
-usage()
-{
-    cat <<EOF
-usage: dagger [-d] [-C <root>] <command> [<args>]
-
-Directed Acyclic Graph Generational Execution Runner
-
-Global options:
-
-  -d
-    In addition to the system log, also log messages to stderr.
-
-  -C <root>
-    Instead of the current working directory, use <root> as the dagger
-    root directory.
-
-Commands:
-
-  abandon
-    Abandon a prepared, but not yet applied, next generation.
-
-  evolve
-    Run the exit action of the current generation, followed by the
-    init action of the next generation.
-
-  exec <action>
-    Run the specified action of the current generation.
-
-  help
-    Show this message.
-
-EOF
-}
-
-basedir=$(pwd)
-
-# Global options
-while getopts "dC:" opt; do
-    case $opt in
-	d)
-	    LOGGER_STDOUT=-s
-	    ;;
-	C)
-	    basedir=$OPTARG
-	    ;;
-	*)
-	    usage && exit 1
-    esac
-done
-shift $((OPTIND - 1))
-
-if [ $# -lt 1 ]; then
-    usage && exit 1
-fi
-
-cmd=$1
-shift
-
-case $cmd in
-    "help")
-	usage && exit 0
-	;;
-    "abandon")
-	do_abandon
-	;;
-    "evolve")
-	do_evolve
-	;;
-    "exec")
-	do_exec "$@"
-	;;
-
-    *)
-	usage && exit 1
-esac

board/common/users

@@ -0,0 +1,3 @@
+clicon   -1 clicon   -1 *      - -             wheel Clixon backend
+factory  -1 wheel    -1 =reset - /sbin/factory - Reset to factory defaults
+www-data -1 www-data -1 *      - -             clicon www-data

board/netconf/post-build.sh

@@ -1,9 +0,0 @@
-#!/bin/sh
-# shellcheck disable=SC1090
-. "$BR2_CONFIG" 2>/dev/null
-
-# Drop Buildroot default symlink to /tmp
-if [ -L "$TARGET_DIR/var/lib/avahi-autoipd" ]; then
-	rm    "$TARGET_DIR/var/lib/avahi-autoipd"
-	mkdir "$TARGET_DIR/var/lib/avahi-autoipd"
-fi

board/netconf/rootfs/etc/auto-factory.d/10-authentication.json

@@ -1,12 +0,0 @@
-{
-  "ietf-system:system": {
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$6$bKPp6xu45L1cmp70$fcwDhGZct4q8LxwPASf9iVHyWqnklcdjeYi/SupLo1K9nb.aAQUz48.3qTcW38XL6gQzfHyGoyeDG2orjPUwm1"
-        }
-      ]
-    }
-  }
-}

board/netconf/rootfs/etc/auto-factory.d/10-nacm.json

@@ -1,68 +0,0 @@
-{
-    "ietf-netconf-acm:nacm": {
-	"groups": {
-	    "group": [
-		{
-		    "name": "admin",
-		    "user-name": [
-			"admin"
-		    ]
-		}
-	    ]
-	},
-	"rule-list": [
-	    {
-		"name": "guest-acl",
-		"group": [
-		    "guest"
-		],
-		"rule": [
-		    {
-			"name": "deny-ncm",
-			"module-name": "ietf-netconf-monitoring",
-			"access-operations": "*",
-			"action": "deny",
-			"comment": "Disallow guests access to any NETCONF monitoring information."
-		    }
-		]
-	    },
-	    {
-		"name": "limited-acl",
-		"group": [
-		    "limited"
-		],
-		"rule": [
-		    {
-			"name": "permit-ncm",
-			"module-name": "ietf-netconf-monitoring",
-			"access-operations": "read",
-			"action": "permit",
-			"comment": "Allow read access to the NETCONF monitoring information."
-		    },
-		    {
-			"name": "permit-exec",
-			"module-name": "*",
-			"access-operations": "exec",
-			"action": "permit",
-			"comment": "Allow invocation of the supported server operations."
-		    }
-		]
-	    },
-	    {
-		"name": "admin-acl",
-		"group": [
-		    "admin"
-		],
-		"rule": [
-		    {
-			"name": "permit-all",
-			"module-name": "*",
-			"access-operations": "*",
-			"action": "permit",
-			"comment": "Allow 'admin' group complete access to all operations and data."
-		    }
-		]
-	    }
-	]
-    }
-}

board/netconf/rootfs/etc/auto-factory.d/10-netconf-server.json

@@ -1,34 +0,0 @@
-{
-    "ietf-netconf-server:netconf-server": {
-	"listen": {
-	    "endpoint": [
-		{
-		    "name": "default-ssh",
-		    "ssh": {
-			"tcp-server-parameters": {
-			    "local-address": "::"
-			},
-			"ssh-server-parameters": {
-                            "server-identity": {
-				"host-key": [
-                                    {
-					"name": "default-key",
-					"public-key": {
-					    "keystore-reference": "genkey"
-					}
-				    }
-				]
-                            },
-			    "client-authentication": {
-				"supported-authentication-methods": {
-				    "publickey": [null],
-				    "passsword": [null]
-				}
-			    }
-			}
-		    }
-		}
-	    ]
-	}
-    }
-}

board/netconf/rootfs/etc/ssh/sshd_config.d/var-auth.conf

@@ -1 +0,0 @@
-AuthorizedKeysFile /var/run/sshd/%u.keys

board/netconf/rootfs/etc/sysctl.d/ipv4.conf

@@ -1 +0,0 @@
-net.ipv4.conf.all.forwarding=0

board/netconf/rootfs/etc/sysctl.d/ipv6.conf

@@ -1,4 +0,0 @@
-net.ipv6.conf.all.forwarding=0
-net.ipv6.conf.all.autoconf=0
-net.ipv6.conf.default.autoconf=0
-net.ipv6.conf.default.keep_addr_on_down=1

board/netconf/xattrs

@@ -1 +0,0 @@
-/var/lib/avahi-autoipd  d 0755 avahi avahi - - - - -

board/x86_64/board.mk

@@ -1,28 +0,0 @@
-test-dir := $(BR2_EXTERNAL_INFIX_PATH)/test
-INFIX_TESTS ?= $(test-dir)/case/all.yaml
-
-test-env = $(test-dir)/env \
-	-f $(BINARIES_DIR)/infix-x86_64.img \
-	$(1) $(2)
-
-test-env-qeneth = $(call test-env,-q $(test-dir)/virt/dual,$(1))
-test-env-run    = $(call test-env,-C -t $(BINARIES_DIR)/qemu.dot,$(1))
-
-.PHONY: test-%
-
-test-qeneth:
-	$(call test-env-qeneth,\
-		$(BR2_EXTERNAL_INFIX_PATH)/9pm/9pm.py \
-			$(INFIX_TESTS))
-test-qeneth-sh:
-	$(call test-env-qeneth,/bin/sh)
-
-test-run: | ~/.infix-test-venv
-	$(call test-env-run,\
-		$(BR2_EXTERNAL_INFIX_PATH)/9pm/9pm.py \
-			$(INFIX_TESTS))
-test-run-sh:
-	$(call test-env-run,/bin/sh)
-
-~/.infix-test-venv:
-	$(test-dir)/docker/init-venv.sh $(test-dir)/docker/pip-requirements.txt

board/x86_64/grub.cfg

@@ -1,73 +0,0 @@
-set timeout="1"
-
-load_env ORDER DEBUG
-
-if [ -z "$ORDER" ]; then
-    set ORDER="primary secondary"
-fi
-
-set ORDER="$ORDER reboot"
-
-for slot in $ORDER; do
-    if [ -z "$default" ]; then
-        set default="$slot"
-    else
-        # Contrary to what the documentation says, GRUB (2.06) does
-        # not support using titles or IDs in the fallback variable, so
-        # we translate to indices.
-        if [ "$slot" = "primary" ]; then
-            set fallback="$fallback 0"
-        elif [ "$slot" = "secondary" ]; then
-            set fallback="$fallback 1"
-        elif [ "$slot" = "net" ]; then
-            set fallback="$fallback 2"
-        elif [ "$slot" = "reboot" ]; then
-            set fallback="$fallback 3"
-	fi
-    fi
-done
-
-if [ "$DEBUG" ]; then
-    set log="debug"
-else
-    set log="loglevel=4"
-fi
-
-submenu "primary" "$log" {
-    set slot="$1"
-    set append="console=ttyS0 root=PARTLABEL=$slot $2"
-    set root=(hd0,gpt3)
-    source /boot/grub/grub.cfg
-}
-
-submenu "secondary" "$log"  {
-    set slot="$1"
-    set append="console=ttyS0 root=PARTLABEL=$slot $2"
-    set root=(hd0,gpt4)
-    source /boot/grub/grub.cfg
-}
-
-submenu "net" "$log"  {
-    net_dhcp
-
-    if [ "$net_efinet0_dhcp_next_server" -a "$net_efinet0_dhcp_boot_file" ]; then
-	set initrd=(tftp,$net_efinet0_dhcp_next_server)/$net_efinet0_dhcp_boot_file
-	loopback initrd $initrd
-	set root=(initrd)
-
-	set slot="$1"
-	set append="console=ttyS0 root=/dev/ram ramdisk_size=65536 $2"
-	source /boot/grub/grub.cfg
-    else
-	if [ -z "$net_efinet0_dhcp_next_server" ]; then
-	    echo "No TFTP server supplied in DHCP response"
-	fi
-	if [ -z "$net_efinet0_dhcp_boot_file" ]; then
-	    echo "No bootfile supplied in DHCP response"
-	fi
-    fi
-}
-
-submenu "reboot" {
-    reboot
-}

board/x86_64/rootfs/boot/grub/grub.cfg

@@ -1,6 +0,0 @@
-menuentry "Infix" --id infix {
-	linux /boot/bzImage rauc.slot=$slot nokaslr $append
-	if [ "$initrd" ]; then
-	   initrd $initrd
-	fi
-}

configs/aarch64_classic_defconfig

@@ -1,110 +0,0 @@
-BR2_aarch64=y
-BR2_ARM_FPU_VFPV4=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
-BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
-BR2_DL_DIR="${BR2_EXTERNAL_INFIX_PATH}/dl"
-BR2_CCACHE=y
-BR2_CCACHE_DIR="${BR2_EXTERNAL_INFIX_PATH}/.ccache"
-BR2_GLOBAL_PATCH_DIR="${BR2_EXTERNAL_INFIX_PATH}/patches"
-BR2_TARGET_GENERIC_HOSTNAME="infix"
-BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
-BR2_INIT_FINIT=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
-BR2_TARGET_GENERIC_GETTY_TERM="linux"
-BR2_SYSTEM_DHCP="eth0"
-BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA"
-BR2_GENERATE_LOCALE="en_US en_CA"
-BR2_TARGET_TZ_INFO=y
-BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/classic/rootfs"
-BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/classic/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.17"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-3720-espressobin marvell/armada-3720-espressobin-emmc marvell/armada-3720-espressobin-v7 marvell/armada-3720-espressobin-v7-emmc marvell/armada-3720-espressobin-ultra marvell/cn9130-crb-A marvell/cn9130-crb-B sparx5_pcb135_emmc_no_psci"
-BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/dts/microchip/sparx5_pcb135_emmc_no_psci.dts"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_JQ=y
-BR2_PACKAGE_MDIO_TOOLS=y
-BR2_PACKAGE_RNG_TOOLS=y
-BR2_PACKAGE_UBOOT_TOOLS=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
-BR2_PACKAGE_CA_CERTIFICATES=y
-BR2_PACKAGE_LIBCURL_CURL=y
-BR2_PACKAGE_NSS_MDNS=y
-BR2_PACKAGE_ONIGURUMA=y
-BR2_PACKAGE_AVAHI=y
-# BR2_PACKAGE_AVAHI_AUTOIPD is not set
-BR2_PACKAGE_AVAHI_DAEMON=y
-BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
-BR2_PACKAGE_DHCPCD=y
-BR2_PACKAGE_DNSMASQ=y
-BR2_PACKAGE_DROPBEAR=y
-BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS=y
-BR2_PACKAGE_DROPBEAR_WTMP=y
-BR2_PACKAGE_DROPBEAR_LASTLOG=y
-BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO=y
-BR2_PACKAGE_ETHTOOL=y
-BR2_PACKAGE_FPING=y
-# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
-BR2_PACKAGE_IPROUTE2=y
-BR2_PACKAGE_IPTABLES=y
-BR2_PACKAGE_IPTABLES_NFTABLES=y
-BR2_PACKAGE_LLDPD=y
-BR2_PACKAGE_LYNX=y
-BR2_PACKAGE_MTR=y
-BR2_PACKAGE_NETCALC=y
-BR2_PACKAGE_NFTABLES=y
-BR2_PACKAGE_NMAP=y
-BR2_PACKAGE_NMAP_NMAP=y
-BR2_PACKAGE_NMAP_NPING=y
-BR2_PACKAGE_OPENRESOLV=y
-BR2_PACKAGE_SOCAT=y
-BR2_PACKAGE_SSDP_RESPONDER=y
-BR2_PACKAGE_TCPDUMP=y
-BR2_PACKAGE_TRACEROUTE=y
-BR2_PACKAGE_DIALOG=y
-BR2_PACKAGE_PDMENU=y
-BR2_PACKAGE_IRQBALANCE=y
-BR2_PACKAGE_KMOD_TOOLS=y
-BR2_PACKAGE_PWGEN=y
-BR2_PACKAGE_RAUC=y
-BR2_PACKAGE_RAUC_GPT=y
-BR2_PACKAGE_RAUC_NETWORK=y
-BR2_PACKAGE_SYSKLOGD=y
-BR2_PACKAGE_SYSKLOGD_LOGGER=y
-BR2_PACKAGE_WATCHDOGD=y
-BR2_PACKAGE_MG=y
-BR2_PACKAGE_MOST=y
-BR2_PACKAGE_NANO=y
-BR2_TARGET_ROOTFS_SQUASHFS=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_HOST_E2FSPROGS=y
-BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
-BR2_PACKAGE_HOST_GENEXT2FS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_RAUC=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-INFIX_VARIANT_CLASSIC=y
-BR2_PACKAGE_FACTORY=y
-BR2_PACKAGE_FINIT_SULOGIN=y
-BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
-BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
-BR2_PACKAGE_FINIT_PLUGIN_MODULES_LOAD=y
-BR2_PACKAGE_FINIT_PLUGIN_MODPROBE=y
-BR2_PACKAGE_FINIT_PLUGIN_RTC=y
-BR2_PACKAGE_FINIT_PLUGIN_TTY=y
-BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
-BR2_PACKAGE_IFUPDOWN_NG=y
-BR2_PACKAGE_TETRIS=y

configs/aarch64_defconfig

@@ -12,15 +12,16 @@ BR2_TARGET_GENERIC_HOSTNAME="infix"
 BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
 BR2_INIT_FINIT=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/xattrs"
+BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
 BR2_SYSTEM_BIN_SH_BASH=y
 BR2_TARGET_GENERIC_GETTY_TERM="linux"
 BR2_SYSTEM_DHCP="eth0"
 BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA"
 BR2_GENERATE_LOCALE="en_US en_CA"
 BR2_TARGET_TZ_INFO=y
-BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/rootfs"
-BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/post-build.sh"
+BR2_ROOTFS_USERS_TABLES="${BR2_EXTERNAL_INFIX_PATH}/board/common/users"
+BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/rootfs"
+BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
@@ -32,7 +33,6 @@ BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-3720-espressobin marvell/armada
 BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/dts/microchip/sparx5_pcb135_emmc_no_psci.dts"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_STRACE=y
 BR2_PACKAGE_STRESS_NG=y
 BR2_PACKAGE_JQ=y
@@ -47,50 +47,67 @@ BR2_PACKAGE_UBOOT_TOOLS=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
-BR2_PACKAGE_CA_CERTIFICATES=y
-BR2_PACKAGE_LIBOPENSSL_BIN=y
 BR2_PACKAGE_LIBCURL_CURL=y
-BR2_PACKAGE_NETOPEER2_CLI=y
 BR2_PACKAGE_NSS_MDNS=y
 BR2_PACKAGE_ONIGURUMA=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
 BR2_PACKAGE_CHRONY=y
 BR2_PACKAGE_CONNTRACK_TOOLS=y
+BR2_PACKAGE_DHCPCD=y
 BR2_PACKAGE_DNSMASQ=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_FPING=y
+BR2_PACKAGE_FRR=y
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPTABLES=y
 BR2_PACKAGE_IPTABLES_NFTABLES=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_LYNX=y
+BR2_PACKAGE_MRP=y
+BR2_PACKAGE_MSTPD=y
+BR2_PACKAGE_MTR=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NETCAT_OPENBSD=y
 BR2_PACKAGE_NETSNMP=y
 BR2_PACKAGE_NFTABLES=y
+BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_V2_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_GUNZIP_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_AUTH_REQUEST_MODULE=y
 BR2_PACKAGE_NMAP=y
 BR2_PACKAGE_NMAP_NCAT=y
 BR2_PACKAGE_NMAP_NMAP=y
 BR2_PACKAGE_NMAP_NPING=y
 BR2_PACKAGE_OPENRESOLV=y
 BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_SMCROUTE=y
 BR2_PACKAGE_SOCAT=y
 BR2_PACKAGE_SSDP_RESPONDER=y
 BR2_PACKAGE_TCPDUMP=y
 BR2_PACKAGE_TRACEROUTE=y
 BR2_PACKAGE_ULOGD=y
 BR2_PACKAGE_BASH_COMPLETION=y
+BR2_PACKAGE_DIALOG=y
+BR2_PACKAGE_NEOFETCH=y
+BR2_PACKAGE_PDMENU=y
+BR2_PACKAGE_TMUX=y
+BR2_PACKAGE_TTYD=y
 BR2_PACKAGE_IRQBALANCE=y
 BR2_PACKAGE_KMOD_TOOLS=y
 BR2_PACKAGE_PWGEN=y
 BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_STREAMING=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
 BR2_PACKAGE_MG=y
+BR2_PACKAGE_MOST=y
 BR2_PACKAGE_NANO=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
@@ -102,7 +119,7 @@ BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-BR2_PACKAGE_CONFD=y
+BR2_PACKAGE_CLIXON_RESTCONF_FCGI=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_SULOGIN=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
@@ -112,9 +129,11 @@ BR2_PACKAGE_FINIT_PLUGIN_MODPROBE=y
 BR2_PACKAGE_FINIT_PLUGIN_RTC=y
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
-BR2_PACKAGE_KLINFIX=y
-BR2_PACKAGE_NET=y
+BR2_PACKAGE_IFUPDOWN_NG=y
+BR2_PACKAGE_MECH=y
+BR2_PACKAGE_P_NET=y
+BR2_PACKAGE_P_NET_MAX_SUBSLOTS=12
+BR2_PACKAGE_P_NET_MAX_PHYSICAL_PORTS=10
+BR2_PACKAGE_PROFETH=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_QUERIERD=y
-GNS3_APPLIANCE_RAM=512
-GNS3_APPLIANCE_IFNUM=10

configs/amd64_defconfig

@@ -11,25 +11,25 @@ BR2_TARGET_GENERIC_HOSTNAME="infix"
 BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
 BR2_INIT_FINIT=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/xattrs"
+BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
 BR2_SYSTEM_BIN_SH_BASH=y
 BR2_TARGET_GENERIC_GETTY_TERM="linux"
 BR2_SYSTEM_DHCP="eth0"
 BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA"
 BR2_GENERATE_LOCALE="en_US en_CA"
 BR2_TARGET_TZ_INFO=y
-BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/rootfs"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/post-build.sh"
+BR2_ROOTFS_USERS_TABLES="${BR2_EXTERNAL_INFIX_PATH}/board/common/users"
+BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/amd64/rootfs"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.17"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/amd64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
 BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
 BR2_PACKAGE_STRACE=y
 BR2_PACKAGE_STRESS_NG=y
 BR2_PACKAGE_JQ=y
@@ -44,70 +44,85 @@ BR2_PACKAGE_UBOOT_TOOLS=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
 BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
-BR2_PACKAGE_CA_CERTIFICATES=y
-BR2_PACKAGE_LIBOPENSSL_BIN=y
 BR2_PACKAGE_LIBCURL_CURL=y
-BR2_PACKAGE_NETOPEER2_CLI=y
 BR2_PACKAGE_NSS_MDNS=y
 BR2_PACKAGE_ONIGURUMA=y
 BR2_PACKAGE_AVAHI=y
+# BR2_PACKAGE_AVAHI_AUTOIPD is not set
 BR2_PACKAGE_AVAHI_DAEMON=y
 BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
 BR2_PACKAGE_CHRONY=y
 BR2_PACKAGE_CONNTRACK_TOOLS=y
+BR2_PACKAGE_DHCPCD=y
 BR2_PACKAGE_DNSMASQ=y
 BR2_PACKAGE_ETHTOOL=y
 BR2_PACKAGE_FPING=y
+BR2_PACKAGE_FRR=y
 # BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPTABLES=y
 BR2_PACKAGE_IPTABLES_NFTABLES=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_LYNX=y
+BR2_PACKAGE_MRP=y
+BR2_PACKAGE_MSTPD=y
+BR2_PACKAGE_MTR=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NETCAT_OPENBSD=y
 BR2_PACKAGE_NETSNMP=y
 BR2_PACKAGE_NFTABLES=y
+BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_V2_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_GUNZIP_MODULE=y
+BR2_PACKAGE_NGINX_HTTP_AUTH_REQUEST_MODULE=y
 BR2_PACKAGE_NMAP=y
 BR2_PACKAGE_NMAP_NCAT=y
 BR2_PACKAGE_NMAP_NMAP=y
 BR2_PACKAGE_NMAP_NPING=y
 BR2_PACKAGE_OPENRESOLV=y
 BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_SMCROUTE=y
 BR2_PACKAGE_SOCAT=y
 BR2_PACKAGE_SSDP_RESPONDER=y
 BR2_PACKAGE_TCPDUMP=y
 BR2_PACKAGE_TRACEROUTE=y
 BR2_PACKAGE_ULOGD=y
 BR2_PACKAGE_BASH_COMPLETION=y
+BR2_PACKAGE_DIALOG=y
+BR2_PACKAGE_NEOFETCH=y
+BR2_PACKAGE_PDMENU=y
+BR2_PACKAGE_TMUX=y
+BR2_PACKAGE_TTYD=y
 BR2_PACKAGE_IRQBALANCE=y
 BR2_PACKAGE_KMOD_TOOLS=y
 BR2_PACKAGE_PWGEN=y
 BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_STREAMING=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
 BR2_PACKAGE_MG=y
+BR2_PACKAGE_MOST=y
 BR2_PACKAGE_NANO=y
 BR2_TARGET_ROOTFS_SQUASHFS=y
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_TARGET_EDK2=y
 BR2_TARGET_GRUB2=y
 BR2_TARGET_GRUB2_X86_64_EFI=y
-BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 squash4 part_gpt normal efi_gop configfile loadenv test echo reboot net efinet tftp loopback"
-BR2_TARGET_GRUB2_BUILTIN_CONFIG_EFI="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/grub-embed.cfg"
+BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_gpt normal efi_gop configfile loadenv test terminfo terminal echo"
+BR2_TARGET_GRUB2_BUILTIN_CONFIG_EFI="${BR2_EXTERNAL_INFIX_PATH}/board/amd64/grub-embed.cfg"
 BR2_TARGET_GRUB2_INSTALL_TOOLS=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
 BR2_PACKAGE_HOST_E2FSPROGS=y
 BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
 BR2_PACKAGE_HOST_GENEXT2FS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-BR2_PACKAGE_CONFD=y
+BR2_PACKAGE_CLIXON_RESTCONF_FCGI=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_SULOGIN=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
@@ -117,9 +132,11 @@ BR2_PACKAGE_FINIT_PLUGIN_MODPROBE=y
 BR2_PACKAGE_FINIT_PLUGIN_RTC=y
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
-BR2_PACKAGE_KLINFIX=y
-BR2_PACKAGE_NET=y
+BR2_PACKAGE_IFUPDOWN_NG=y
+BR2_PACKAGE_MECH=y
+BR2_PACKAGE_P_NET=y
+BR2_PACKAGE_P_NET_MAX_SUBSLOTS=12
+BR2_PACKAGE_P_NET_MAX_PHYSICAL_PORTS=10
+BR2_PACKAGE_PROFETH=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_QUERIERD=y
-GNS3_APPLIANCE_RAM=512
-GNS3_APPLIANCE_IFNUM=10

configs/cn9130_crb_boot_defconfig

@@ -24,6 +24,3 @@ BR2_TARGET_BINARIES_MARVELL=y
 BR2_TARGET_MV_DDR_MARVELL=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="mvebu_crb_cn9130"
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y

configs/x86_64_classic_defconfig

@@ -1,114 +0,0 @@
-BR2_x86_64=y
-BR2_x86_corei7=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
-BR2_DL_DIR="${BR2_EXTERNAL_INFIX_PATH}/dl"
-BR2_CCACHE=y
-BR2_CCACHE_DIR="${BR2_EXTERNAL_INFIX_PATH}/.ccache"
-BR2_GLOBAL_PATCH_DIR="${BR2_EXTERNAL_INFIX_PATH}/patches"
-BR2_TARGET_GENERIC_HOSTNAME="infix"
-BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
-BR2_INIT_FINIT=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
-BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
-BR2_TARGET_GENERIC_GETTY_TERM="linux"
-BR2_SYSTEM_DHCP="eth0"
-BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA"
-BR2_GENERATE_LOCALE="en_US en_CA"
-BR2_TARGET_TZ_INFO=y
-BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/classic/rootfs"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/classic/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.17"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
-BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_JQ=y
-BR2_PACKAGE_RNG_TOOLS=y
-BR2_PACKAGE_UBOOT_TOOLS=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-BR2_PACKAGE_UBOOT_TOOLS_FIT_CHECK_SIGN=y
-BR2_PACKAGE_CA_CERTIFICATES=y
-BR2_PACKAGE_LIBCURL_CURL=y
-BR2_PACKAGE_NSS_MDNS=y
-BR2_PACKAGE_ONIGURUMA=y
-BR2_PACKAGE_AVAHI=y
-# BR2_PACKAGE_AVAHI_AUTOIPD is not set
-BR2_PACKAGE_AVAHI_DAEMON=y
-BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
-BR2_PACKAGE_DHCPCD=y
-BR2_PACKAGE_DNSMASQ=y
-BR2_PACKAGE_DROPBEAR=y
-BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS=y
-BR2_PACKAGE_DROPBEAR_WTMP=y
-BR2_PACKAGE_DROPBEAR_LASTLOG=y
-BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO=y
-BR2_PACKAGE_ETHTOOL=y
-BR2_PACKAGE_FPING=y
-# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
-BR2_PACKAGE_IPROUTE2=y
-BR2_PACKAGE_IPTABLES=y
-BR2_PACKAGE_IPTABLES_NFTABLES=y
-BR2_PACKAGE_LLDPD=y
-BR2_PACKAGE_LYNX=y
-BR2_PACKAGE_MTR=y
-BR2_PACKAGE_NETCALC=y
-BR2_PACKAGE_NFTABLES=y
-BR2_PACKAGE_NMAP=y
-BR2_PACKAGE_NMAP_NMAP=y
-BR2_PACKAGE_NMAP_NPING=y
-BR2_PACKAGE_OPENRESOLV=y
-BR2_PACKAGE_SOCAT=y
-BR2_PACKAGE_SSDP_RESPONDER=y
-BR2_PACKAGE_TCPDUMP=y
-BR2_PACKAGE_TRACEROUTE=y
-BR2_PACKAGE_DIALOG=y
-BR2_PACKAGE_PDMENU=y
-BR2_PACKAGE_IRQBALANCE=y
-BR2_PACKAGE_KMOD_TOOLS=y
-BR2_PACKAGE_PWGEN=y
-BR2_PACKAGE_RAUC=y
-BR2_PACKAGE_RAUC_GPT=y
-BR2_PACKAGE_RAUC_NETWORK=y
-BR2_PACKAGE_SYSKLOGD=y
-BR2_PACKAGE_SYSKLOGD_LOGGER=y
-BR2_PACKAGE_WATCHDOGD=y
-BR2_PACKAGE_MG=y
-BR2_PACKAGE_MOST=y
-BR2_PACKAGE_NANO=y
-BR2_TARGET_ROOTFS_SQUASHFS=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_EDK2=y
-BR2_TARGET_GRUB2=y
-BR2_TARGET_GRUB2_X86_64_EFI=y
-BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI="boot linux ext2 fat squash4 part_gpt normal efi_gop configfile loadenv test terminfo terminal echo"
-BR2_TARGET_GRUB2_BUILTIN_CONFIG_EFI="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/grub-embed.cfg"
-BR2_TARGET_GRUB2_INSTALL_TOOLS=y
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_E2FSPROGS=y
-BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
-BR2_PACKAGE_HOST_GENEXT2FS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
-BR2_PACKAGE_HOST_RAUC=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
-BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SIGNATURE_SUPPORT=y
-INFIX_VARIANT_CLASSIC=y
-BR2_PACKAGE_FACTORY=y
-BR2_PACKAGE_FINIT_SULOGIN=y
-BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
-BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
-BR2_PACKAGE_FINIT_PLUGIN_MODULES_LOAD=y
-BR2_PACKAGE_FINIT_PLUGIN_MODPROBE=y
-BR2_PACKAGE_FINIT_PLUGIN_RTC=y
-BR2_PACKAGE_FINIT_PLUGIN_TTY=y
-BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
-BR2_PACKAGE_IFUPDOWN_NG=y
-BR2_PACKAGE_TETRIS=y

configs/x86_64_minimal_defconfig

@@ -1,74 +0,0 @@
-BR2_x86_64=y
-BR2_x86_corei7=y
-BR2_TOOLCHAIN_EXTERNAL=y
-BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y
-BR2_DL_DIR="${BR2_EXTERNAL_INFIX_PATH}/dl"
-BR2_CCACHE=y
-BR2_CCACHE_DIR="${BR2_EXTERNAL_INFIX_PATH}/.ccache"
-BR2_ENABLE_DEBUG=y
-BR2_GLOBAL_PATCH_DIR="${BR2_EXTERNAL_INFIX_PATH}/patches"
-BR2_TARGET_GENERIC_HOSTNAME="infix"
-BR2_TARGET_GENERIC_ISSUE="Minfix by KernelKit"
-BR2_INIT_FINIT=y
-BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
-BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/xattrs"
-BR2_SYSTEM_BIN_SH_BASH=y
-BR2_TARGET_GENERIC_GETTY_TERM="linux"
-BR2_SYSTEM_DHCP="eth0"
-BR2_ENABLE_LOCALE_WHITELIST="C en_US en_CA"
-BR2_GENERATE_LOCALE="en_US en_CA"
-BR2_TARGET_TZ_INFO=y
-BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/rootfs ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/rootfs"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/netconf/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.19.17"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF=y
-BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
-BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
-BR2_PACKAGE_JQ=y
-BR2_PACKAGE_DBUS_CXX=y
-BR2_PACKAGE_DBUS_GLIB=y
-BR2_PACKAGE_DBUS_TRIGGERD=y
-BR2_PACKAGE_EUDEV_RULES_GEN=y
-# BR2_PACKAGE_EUDEV_ENABLE_HWDB is not set
-BR2_PACKAGE_RNG_TOOLS=y
-BR2_PACKAGE_LIBOPENSSL_BIN=y
-BR2_PACKAGE_NETOPEER2_CLI=y
-BR2_PACKAGE_NSS_MDNS=y
-BR2_PACKAGE_ONIGURUMA=y
-BR2_PACKAGE_AVAHI=y
-BR2_PACKAGE_AVAHI_DAEMON=y
-BR2_PACKAGE_AVAHI_DEFAULT_SERVICES=y
-BR2_PACKAGE_CHRONY=y
-BR2_PACKAGE_DNSMASQ=y
-BR2_PACKAGE_ETHTOOL=y
-# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
-BR2_PACKAGE_LLDPD=y
-BR2_PACKAGE_OPENRESOLV=y
-BR2_PACKAGE_OPENSSH=y
-BR2_PACKAGE_SSDP_RESPONDER=y
-BR2_PACKAGE_TCPDUMP=y
-BR2_PACKAGE_KMOD_TOOLS=y
-BR2_PACKAGE_SYSKLOGD=y
-BR2_PACKAGE_SYSKLOGD_LOGGER=y
-BR2_TARGET_ROOTFS_SQUASHFS=y
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_PACKAGE_CONFD=y
-BR2_PACKAGE_FACTORY=y
-BR2_PACKAGE_FINIT_SULOGIN=y
-BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
-BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
-BR2_PACKAGE_FINIT_PLUGIN_MODULES_LOAD=y
-BR2_PACKAGE_FINIT_PLUGIN_MODPROBE=y
-BR2_PACKAGE_FINIT_PLUGIN_RTC=y
-BR2_PACKAGE_FINIT_PLUGIN_TTY=y
-BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
-BR2_PACKAGE_KLINFIX=y
-BR2_PACKAGE_NET=y
-# SIGN_ENABLED is not set
-# GNS3_APPLIANCE is not set

doc/RESTCONF.md

@@ -1,221 +0,0 @@
-Infix System Configuration and RESTCONF API
-===========================================
-
-This document shows how to configure settings in the Infix CLI and how
-to remotely inspect and change the configuration, as well as send RPC
-commands, using the RESTCONF API.
-
-
-Configuration
--------------
-
-
-### NTP Client
-
-How to configure two NTP servers with different options:
-
-```
-set system ntp 
-set system ntp server default 
-set system ntp server default udp address 1.2.3.4
-set system ntp server default udp port 1231
-set system ntp server default iburst true
-set system ntp server default prefer true
-set system ntp server foo 
-set system ntp server foo udp address 4.3.2.1
-set system ntp server foo iburst false
-commit
-```
-
-How to set up an actually working configuration when the system has a
-valid IP address:
-
-```
-set system ntp server bar
-set system ntp server bar udp address 192.168.122.1
-commit
-```
-
-
-### Static IP Address
-
-DHCP support not yet ready, but would be the default in a product
-with NETCONF as the primary interface.  This eliminates the need
-to set up the device and give a works-out-of-the-box experience.
-(Pending separate discussion on security aspects, of course).
-
-```
-set interface eth0 
-set interface eth0 type ianaift:ethernetCsmacd
-set interface eth0 enabled true
-set interface eth0 ipv4 
-set interface eth0 ipv4 enabled true
-set interface eth0 ipv4 address 192.168.122.22 
-set interface eth0 ipv4 address 192.168.122.22 prefix-length 24
-commit
-```
-
-Multiple IP addresses per interface will be in the final product.
-
-```
-> show configuration
-ietf-system:system {
-   hostname flood;
-}
-ietf-interfaces:interfaces {
-   interface eth0 {
-      type ianaift:ethernetCsmacd;
-      enabled true;
-      ietf-ip:ipv4 {
-         enabled true;
-         address 192.168.122.22 {
-            prefix-length 24;
-         }
-      }
-   }
-   interface eth1 {
-   }
-}
-clixon-restconf:restconf {
-   enable true;
-   auth-type none;
-   fcgi-socket /run/clixon/restconf.sock;
-}
-```
-
-**Note:** authentication disabled for demo purposes.
-
-To save the configuration so that it persists across reboots:
-
-```
-copy running startup
-```
-
-
-RESTCONF API
-------------
-
-Get a subset of the configuration:
-
-```
-$ curl -X GET http://192.168.122.22/restconf/data/ietf-system:system
-{
-   "ietf-system:system": {
-      "hostname": "foo"
-   }
-}
-```
-
-```
-$ curl -k -X GET http://192.168.122.22/restconf/data/ietf-system:system-state/
-{
-   "ietf-system:system-state": {
-      "platform": {
-         "os-name": "Infix",
-         "os-release": "Buildroot 2023.02",
-         "os-version": "latest-227-g51c35e9-dirty",
-         "machine": "x86_64"
-      },
-      "clock": {
-         "current-datetime": "2023-03-23T22:15:53+01:00",
-         "boot-datetime": "2023-03-23T22:08:42+01:00"
-      }
-   }
-}
-```
-
-
-List available RPC operations:
-
-```
-$ curl -X GET http://192.168.122.22/restconf/operations
-{"operations": {
-"ietf-system:set-current-datetime": [null],
-	"ietf-system:system-restart": [null],
-	"ietf-system:system-shutdown": [null],
-	"clixon-lib:debug": [null],
-	"clixon-lib:ping": [null],
-	"clixon-lib:stats": [null],
-	"clixon-lib:restart-plugin": [null],
-	"clixon-lib:process-control": [null],
-	"ietf-netconf-monitoring:get-schema": [null],
-	"ietf-netconf:get-config": [null],
-	"ietf-netconf:edit-config": [null],
-	"ietf-netconf:copy-config": [null],
-	"ietf-netconf:delete-config": [null],
-	"ietf-netconf:lock": [null],
-	"ietf-netconf:unlock": [null],
-	"ietf-netconf:get": [null],
-	"ietf-netconf:close-session": [null],
-	"ietf-netconf:kill-session": [null],
-	"ietf-netconf:commit": [null],
-	"ietf-netconf:discard-changes": [null],
-	"ietf-netconf:cancel-commit": [null],
-	"ietf-netconf:validate": [null],
-	"clixon-rfc5277:create-subscription": [null],
-	"ietf-netconf-nmda:get-data": [null],
-	"ietf-netconf-nmda:edit-data": [null]}
-}
-```
-
-
-### Set hostname remotely
-
-```
-$ curl -is -H 'Content-Type: application/yang-data+json' -H 'Accept: application/yang-data+json' -X PATCH -d @hostname.cfg http://192.168.122.22/restconf/data/ietf-system:system
-HTTP/1.1 204 No Content
-Server: nginx/1.22.1
-Date: Thu, 16 Mar 2023 13:53:53 GMT
-Connection: keep-alive
-```
-
-The file `hostname.cfg` is in JSON format and looks like this:
-
-```
-{
-   "ietf-system:system": {
-      "hostname": "foo"
-   }
-}
-```
-
-One-liner command without external `.cfg` file:
-
-```
-$ curl -is -H 'Content-Type: application/yang-data+json' -H 'Accept: application/yang-data+json' -X PATCH -d '{"ietf-system:system":{"hostname":"flood"}}' http://192.168.122.22/restconf/data/ietf-system:system
-HTTP/1.1 204 No Content
-Server: nginx/1.22.1
-Date: Thu, 16 Mar 2023 14:1
-```
-
-Run this on a PC connected to the "switch" to see how the settings take effect immediately:
-
-```
-$ watch 'lldpcli show neighbors |grep -A20 tap0'
-```
-
-### RPCs
-
-Perform system reboot remotely:
-
-```
-$ curl -k -X POST http://192.168.122.22/restconf/operations/ietf-system:system-restart
-```
-
-Enable debug remotely:
-
-```
-$ curl -Ssik -X POST -H "Content-Type: application/yang-data+json" http://192.168.122.22/restconf/operations/clixon-lib:debug -d '{"clixon-lib:input":{"level":1}}'
-```
-
-Set current date/time:
-
-```
-$ curl -Ssik -X POST -H "Content-Type: application/yang-data+json" http://192.168.122.22/restconf/operations/ietf-system:set-current-datetime -d '{"ietf-system:input":{"current-datetime":"2023-03-23T22:15:53+01:00"}}'
-HTTP/1.1 204 No Content
-Server: nginx/1.22.1
-Date: Thu, 23 Mar 2023 22:46:52 GMT
-Connection: keep-alive
-```
-$ curl -Ssik -X POST -H "Content-Type: application/yang-data+json" http://192.168.122.22/restconf/operations/ietf-system:set-current-datetime -d '{"ietf-system:input":{"current-datetime":"2023-03-23T20:15:53+05:00"}}'
-

doc/boot.md

@@ -329,10 +329,11 @@ rollbacks when upgrading to a new version.
 | Size      | >= 16 MiB       |
 | Format    | EXT4 filesystem |
 
-Non-volatile storage of the system configuration and user data.
-Concretely, user data is everything stored under `/root` and `/home`.
-Depending on the operating mode, the configuration is either the NETCONF
-databases from `/cfg`, or the contents of `/etc` in classic mode.
+Non-volatile storage of the system configuration and user
+data. Concretely, user data is everything stored under `/root` and
+`/home`. Depending on the operating mode, the configuration is either
+the NETCONF databases from `/cfg`, or the contents of `/etc` when
+operating in native mode.
 
 
 ### `var` - Variable Data

doc/cli.md

@@ -1,139 +0,0 @@
-CLI User Guide
-==============
-
-The Infix CLI is built on the [klish project][1], which is a framework
-for implementing a CISCO, or Juniper Networs JunOS-like CLI on a UNIX
-systems.
-
-Currently, when the `admin` user logs in the default shell is Bash.  To
-access the CLI, type:
-
-    cli
-
-Key commands available in any context are:
-
-    help
-	show
-
-For each command it is also possible to press the `?` key and `TAB` to
-get more help and suggestions for completion.
-
-
-Admin Exec
-----------
-
-The top-level context after logging in and starting the CLI is the
-admin-exec or "main" context.  It is used for querying system status,
-managing configuration files/profiles and doing advanced debugging.
-
-Available commands can be seen by pressing `?` at the prompt:
-
-```
-root@infix-12-34-56:exec> 
-  configure  Create new candidate-config based on running-config
-  copy       Copy
-  exit       Exit
-  logout     Alias for exit
-  shell      Enter system shell
-  show       Show
-```
-
-Configure Context
------------------
-
-Enter the configure context from admin-exec by typing `configure`
-followed by Enter.  Available commands, press `?` at the prompt:
-
-```
-root@infix-12-34-56:configure> 
-  abort     Abandon candidate
-  check     Validate candidate
-  commit    Commit current candidate to running-config
-  delete    Delete configuration setting(s)
-  diff      Summarize uncommitted changes
-  do        Execute operational mode command
-  edit      Descend to the specified configuration node
-  exit      Ascend to the parent configuration node, or abort (from top)
-  leave     Finalize candidate and apply to running-config
-  no        Alias for delete
-  rollback  Restore candidate to running-config
-  set       Set configuration setting
-  show      Show configuration
-  top       Ascend to the configuration root
-  up        Ascend to the parent configuration node
-[edit]
-```
-
-The `edit` command lets you change to a sub-configure context, e.g.:
-
-```
-root@infix-12-34-56:configure> edit interfaces interface eth0 
-[edit interfaces interface eth0]
-```
-
-Notice the `[edit ...]` displayed, it shows your current location.
-Use `up` to go back to the previous context.
-
-```
-root@infix-12-34-56:configure> up
-[edit]
-```
-
-### Set IP Address on an Interface
-
-```
-root@infix-12-34-56:configure> 
-[edit]
-root@infix-12-34-56:configure> edit interfaces interface eth0 
-[edit interfaces interface eth0]
-root@infix-12-34-56:configure> set ipv4 address 192.168.2.200 prefix-length 24
-[edit interfaces interface eth0]
-```
-
-From anywhere in configure context you can see the changes you have
-made by typing `diff`:
-
-```
-root@infix-12-34-56:configure> diff
-interfaces {
-  interface eth0 {
-+    ipv4 {
-+      address 192.168.2.200 {
-+        prefix-length 24;
-+      }
-+    }
-  }
-}
-```
-
-### Saving Changes
-
-Apply the changes (from candidate to running):
-
-```
-root@infix-12-34-56:configure> leave
-root@infix-12-34-56:exec> show running-config 
-interfaces {
-  interface eth0 {
-    type ethernetCsmacd;
-    ipv4 {
-      address 192.168.2.200 {
-        prefix-length 24;
-      }
-    }
-  }
-```
-
-Since we did not get any warnings we can save the running (RAM only)
-configuration to startup, so the changes are made persistent across
-reboots:
-
-```
-root@infix-12-34-56:exec> copy running-config startup-config 
-```
-
-> **Note:** most (all) commands need to be spelled out, no short forms
-> are allowed at the moment.  Use the `TAB` key to make this easier.
-
-
-[1]: https://src.libcode.org/pkun/klish

doc/container.md

@@ -1,109 +0,0 @@
-Containers in Infix
-===================
-
-The default builds of Infix do not enable any container support.  This
-because it is not a common customer feature, and it extends build times
-due to bringing in a build-time dependency on Go.
-
-However,customer specific builds may have it, and you can also roll your
-own based on any of the available `defconfigs`.  For example:
-
-    cd infix/
-    make x86_64_defconfig
-
-
-Docker Containers with Podman
------------------------------
-
-Run menuconfig, search for `podman`, enable that and build:
-
-	make menuconfig
-	...
-	make
-
-Enabling [podman][] select `crun`, `conmon`, and all other dependencies.
-The build will take a while, but eventually you can:
-
-    make run
-
-> A convenience alias `docker=podman` is available, but remember, not
-> all features or syntax of docker is available in podman.
-
-Test it out with an example:
-
-    podman run -it --rm docker://hello-world
-
-or a little web server:
-
-    podman run -d --rm -p 80:80 docker://nginx:alpine
-
-In detached (`-d`) state you can check the status using `podman ps` or
-try to connect to the web server:
-
-    curl http://localhost
-
-or
-
-    lynx http://localhost
-
-
-### Multiple Networks
-
-It is also possible to start a container with multiple networks.  The
-approach shown here uses CNI profiles, which means the interfaces names
-inside the container will always be: `eth0`, `eth1`, etc.
-
-Pending VETH support in Infix/NETCONF, the following example sets up a
-VETH pair, then creates a CNI profile, and finally starts a container
-with two profiles, the default podman bridge and the VETH profile:
-
-     ip link add local1 type veth peer local1_peer
-     ip link set local1 up
-     ip addr add 192.168.0.1/24 dev local1
-     cni create host net1 local1_peer 192.168.0.42/24
-     podman run -d --rm --net=podman,net1 --privileged docker://troglobit/buildroot:latest
-
-The first profile (`podman`) is a the default bridged profile.  When a
-container is started with that (default behavior), podman dynamically
-creates a VETH pair which has one end attached as a bridge port in the
-`cni-podman0` bridge managed by podman, and the other end is brought up
-as `eth0` inside the container.
-
-The second profile is the one we created, it uses the `host-device`
-profile and does not create anything, it simply lifts the peer end of
-the pair into the container as `eth1`.  This CNI profile can also be
-used to hand over control of physical ports to a container.
-
-> **Note:** here we start the container in `--privileged` mode.  This
-> allows the container guest unfiltered access to the host system and it
-> might not be what you want for a production system.  For that at least
-> SECCOMP is recommended, which is out of scope for this tutorial.
-
-
-### NETCONF Build
-
-If you've followed this tutorial then you now have a NETCONF based Infix
-system running.  To run containers on it you need to leverage the Hybrid
-mode, described in the README but also repeated below.
-
-To start containers in *Hybrid Mode*, provided the images have been
-downloaded with `podman pull` first):
-
-```
-root@infix:/cfg/start.d$ cat <<EOF >20-enable-container.sh
-#!/bin/sh
-podman-service -e -d "Nginx container" -p "-p 80:80" nginx:alpine
-exit 0
-EOF
-root@infix:/cfg/start.d$ chmod +x 20-enable-container.sh
-```
-
-Reboot to activate the changes.  To activate the changes without
-rebooting, run the script and call `initctl reload`.
-
-> **Note:** the `/etc` directory is a `tmpfs` ramdisk and contents will
-> be lost on reboot, so to retain custom CNI profiles after reboot you
-> need to either save them and restore in the script above, or recreate
-> them on every boot.
-
-[podman]: https://podman.io

doc/discovery.md

@@ -1,201 +0,0 @@
-Discover Infix Units
-====================
-
-```
- .----.      Ethernet       .-------.
- | PC +---------------------+ Infix |
- '----' if1            eth0 '-------'
-```
-Figure 1: PC directly connected over Ethernet to Infix unit (here eth0).
-
-
-When you wish to discover the IP address of an Infix switch, the simplest
-way is probably to *ping the IPv6 all-hosts* address (ff02::1) over a
-directly connected Ethernet cable. The unit's link-local IPv6 address is
-seen in the response.
-
-In the example below, the PC is connected to Infix via interface *tap0*
-(*tap0* is *if1* in Figure 1) and Infix responds with address
-*fe80::ff:fe00:0*.
-
-```
-linux-pc:# ping -6 -L -c 3 ff02::1%tap0
-PING ff02::1%tap0(ff02::1%tap0) 56 data bytes
-64 bytes from fe80::ff:fe00:0%tap0: icmp_seq=1 ttl=64 time=0.558 ms
-64 bytes from fe80::ff:fe00:0%tap0: icmp_seq=2 ttl=64 time=0.419 ms
-64 bytes from fe80::ff:fe00:0%tap0: icmp_seq=3 ttl=64 time=0.389 ms
-
---- ff02::1%tap0 ping statistics ---
-3 packets transmitted, 3 received, 0% packet loss, time 2043ms
-rtt min/avg/max/mdev = 0.389/0.455/0.558/0.073 ms
-linux-pc:# 
-```
-
-The PC could connect then connect to Infix, e.g., using SSH.
-
-```
-linux-pc:# ssh admin@fe80::ff:fe00:0%tap0
-admin@fe80::ff:fe00:0%tap0's password: admin
-admin@infix-00-00-00:~$ 
-```
-
-## Discovery mechanisms available in Infix
-
-Infix advertises its presence via the [mDNS](#mdns) and [SSDP](#ssdp) discovery
-protocols in addition to [LLDP](#lldp).
-
-### LLDP
-
-Infix supports LLDP (IEEE 802.1AB). For a unit with factory default
-settings, the PC can readout the link-local IPv6 address from the
-Management Address TLV using *tcpdump* or other sniffing tools[^1].
-```
-linux-pc:# tcpdump -i tap0 -Qin -v ether proto 0x88cc
-tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
-15:51:52.061071 LLDP, length 193
-    Chassis ID TLV (1), length 7
-      Subtype MAC address (4): 02:00:00:00:00:00 (oui Unknown)
-    Port ID TLV (2), length 7
-      Subtype MAC address (3): 02:00:00:00:00:00 (oui Unknown)
-    Time to Live TLV (3), length 2: TTL 120s
-    System Name TLV (5), length 14: infix-00-00-00
-    System Description TLV (6), length 91
-      Infix by KernelKit Linux 5.19.17 #1 SMP PREEMPT_DYNAMIC Wed Jun 7 08:47:23 CEST 2023 x86_64
-    System Capabilities TLV (7), length 4
-      System  Capabilities [Bridge, WLAN AP, Router, Station Only] (0x009c)
-      Enabled Capabilities [Station Only] (0x0080)
-    Management Address TLV (8), length 24
-      Management Address length 17, AFI IPv6 (2): fe80::ff:fe00:0
-      Interface Index Interface Numbering (2): 2
-    Port Description TLV (4), length 4: eth0
-    Organization specific TLV (127), length 9: OUI IEEE 802.3 Private (0x00120f)
-      Link aggregation Subtype (3)
-        aggregation status [supported], aggregation port ID 0
-    Organization specific TLV (127), length 9: OUI IEEE 802.3 Private (0x00120f)
-      MAC/PHY configuration/status Subtype (1)
-        autonegotiation [none] (0x00)
-        PMD autoneg capability [unknown] (0x8000)
-        MAU type Unknown (0x0000)
-    End TLV (0), length 0
-^C
-1 packet captured
-linux-pc:# 
-```
-
-If the unit has an IPv4 address assigned, it is shown in an additional
-Management Address TLV.
-
-> **Note** The Management Addresses shown by LLDP are not
-> necessarily associated with the port transmitting the LLDP message. 
-
-In the example below, the IPv4 address (10.0.1.1) happens to be
-assigned to *eth0*, while the IPv6 address (2001:db8::1) is not.
-
-```
-linux-pc:# sudo tcpdump -i tap0 -Qin -v ether proto 0x88cc
-tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
-15:46:07.908665 LLDP, length 207
-    Chassis ID TLV (1), length 7
-      Subtype MAC address (4): 02:00:00:00:00:00 (oui Unknown)
-    Port ID TLV (2), length 7
-      Subtype MAC address (3): 02:00:00:00:00:00 (oui Unknown)
-    Time to Live TLV (3), length 2: TTL 120s
-    System Name TLV (5), length 14: infix-00-00-00
-    System Description TLV (6), length 91
-      Infix by KernelKit Linux 5.19.17 #1 SMP PREEMPT_DYNAMIC Wed Jun 7 08:47:23 CEST 2023 x86_64
-    System Capabilities TLV (7), length 4
-      System  Capabilities [Bridge, WLAN AP, Router, Station Only] (0x009c)
-      Enabled Capabilities [Station Only] (0x0080)
-    Management Address TLV (8), length 12
-      Management Address length 5, AFI IPv4 (1): 10.0.1.1
-      Interface Index Interface Numbering (2): 2
-    Management Address TLV (8), length 24
-      Management Address length 17, AFI IPv6 (2): 2001:db8::1
-      Interface Index Interface Numbering (2): 3
-    Port Description TLV (4), length 4: eth0
-    Organization specific TLV (127), length 9: OUI IEEE 802.3 Private (0x00120f)
-      Link aggregation Subtype (3)
-        aggregation status [supported], aggregation port ID 0
-    Organization specific TLV (127), length 9: OUI IEEE 802.3 Private (0x00120f)
-      MAC/PHY configuration/status Subtype (1)
-        autonegotiation [none] (0x00)
-        PMD autoneg capability [unknown] (0x8000)
-        MAU type Unknown (0x0000)
-    End TLV (0), length 0
-^C
-1 packet captured
-2 packets received by filter
-0 packets dropped by kernel
-linux-pc:#
-```
-
-[^1]: [lldpd: implementation of IEEE 802.1ab
-    (LLDP)](https://github.com/lldp/lldpd) includes *lldpcli*, which
-    is handy to sniff and display LLDP packets.
-
-### mDNS
-
-DNS-SD/mDNS can be used to discover Infix units and services. Infix
-units present their IP addresses, services and hostname within the
-.local domain. This method has good client support in Apple and Linux
-systems. On Linux, tools such as *avahi-browse* or *mdns-scan*[^2] can
-be used to search for devices advertising their services via mDNS.
-
-```
-linux-pc:# avahi-browse -ar
-+   tap0 IPv6 infix-00-00-00                                SFTP File Transfer   local
-+   tap0 IPv4 infix-00-00-00                                SFTP File Transfer   local
-+   tap0 IPv6 infix-00-00-00                                SSH Remote Terminal  local
-+   tap0 IPv4 infix-00-00-00                                SSH Remote Terminal  local
-=   tap0 IPv4 infix-00-00-00                                SFTP File Transfer   local
-   hostname = [infix-00-00-00.local]
-   address = [10.0.1.1]
-   port = [22]
-   txt = []
-=   tap0 IPv4 infix-00-00-00                                SSH Remote Terminal  local
-   hostname = [infix-00-00-00.local]
-   address = [10.0.1.1]
-   port = [22]
-   txt = []
-=   tap0 IPv6 infix-00-00-00                                SFTP File Transfer   local
-   hostname = [infix-00-00-00.local]
-   address = [fe80::ff:fe00:0]
-   port = [22]
-   txt = []
-=   tap0 IPv6 infix-00-00-00                                SSH Remote Terminal  local
-   hostname = [infix-00-00-00.local]
-   address = [fe80::ff:fe00:0]
-   port = [22]
-   txt = []
-^C
-linux-pc:#
-```
-[^2]: [mdns-scan](http://0pointer.de/lennart/projects/mdns-scan/): a
-    tool for scanning for mDNS/DNS-SD published services on the local
-    network
-
-### SSDP
-
-For Windows clients, Infix advertises itself via the SSDP
-protocol. The Infix unit will appear as a *Network Infrastructure* 
-equipment icon in the *Network* tab of Windows Explorer.
-
-In Linux, the *ssdp-scan*[^3] tool can be used to find Infix units via
-SSDP.
-
-```
-linux-pc:# ssdp-scan tap0
-+ infix-00-00-00                            http://10.0.1.1
-linux-pc:# 
-```
-
-> Note 1: Infix presents itself with a HTTP URL, however, currently no
-> Web server is running. Still, the IP address 10.0.1.1 is discovered
-> and can be used for SSH access, etc.
-
-> Note 2: SSDP is limited to IPv4. Thus, it is only valid as discovery
-> mechanism when Infix as well as the client PC has an IPv4 address
-> assigned.
-
-[^3]: [SSDP Responder for
-    Linux/UNIX](https://github.com/troglobit/ssdp-responder)

doc/goals.md

@@ -1,55 +0,0 @@
-Infix Goals
-===========
-
-The founding ideas that drive Infix are:
-
- - Use Buildroot, it is:
-   - High quality, track their LTS releases whenever possible
-   - Well maintained and responsive community
-   - Easy to use (c.f. Yocto or roll-your-own)
-   - Well curated Open Source components
-   - Take active part in Buildroot to secure investment in key components
- - Extend with other Open Source components for system monitoring,
-   networking, etc.  With the intent of upstreaming them to become parts
-   of Buildroot proper
- - Rely on standards, i.e., use NETCONF and YANG
- - When standards are not enough create models that fit well with Linux
-   and chosen Open Source components
- - Keep as much as possible Open Source, no need to maintain stuff that
-   is not core business
- - Secure boot by default
- - Use RAUC for upgrades, it works
- - Serve as a stand-alone(!) base for other projects that use Infix as
-   their Buildroot external -- this makes Infix a great layer for where
-   to publish used Open Source components and patches used in customer
-   projects
-
-**Note:** projects derived from Infix (as a Buildroot external) will be
-  able to seamlessly extend the CLI with other models.
-
-Short Term
-----------
-
-  - Integrate Clixon and some well-chosen IETF/IEEE YANG models
-    (ietf-system, ietf-interfaces/ip)
-  - Get the (from YANG) automatically generated CLI working similar to
-    Cisco, HP ProCurve, and other well-known command line interfaces,
-	with a focus on usability
-  - First baseline release, from Buildroot 2023.02 (LTS) -> v23.6.0
-
-
-Medium Term
------------
-
-  - First Web interface built on top of RESTCONF API
-  - Static routing, firewalling, and other advanced YANG models
-  - OSPF YANG model integrated with Frr as backend
-  - Second release -> v23.10.0
-
-
-Long Term
----------
-
-  - Not determined.
-  - Third release -> v24.6.0
-

doc/testing-log.dot.svg

@@ -1,82 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
- "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<!-- Generated by graphviz version 2.43.0 (0)
- -->
-<!-- Title: dhcp&#45;client&#45;server Pages: 1 -->
-<svg width="309pt" height="252pt"
- viewBox="0.00 0.00 308.52 252.02" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
-<g id="graph0" class="graph" transform="scale(1 1) rotate(0) translate(4 248.02)">
-<title>dhcp&#45;client&#45;server</title>
-<polygon fill="white" stroke="transparent" points="-4,4 -4,-248.02 304.52,-248.02 304.52,4 -4,4"/>
-<!-- host -->
-<g id="node1" class="node">
-<title>host</title>
-<polygon fill="none" stroke="grey" points="0,-87.51 0,-156.51 91,-156.51 91,-87.51 0,-87.51"/>
-<text text-anchor="middle" x="25" y="-118.31" font-family="monospace" font-size="14.00" fill="grey">host</text>
-<polyline fill="none" stroke="grey" points="50,-87.51 50,-156.51 "/>
-<text text-anchor="middle" x="70.5" y="-141.31" font-family="monospace" font-size="14.00" fill="grey">c1</text>
-<polyline fill="none" stroke="grey" points="50,-133.51 91,-133.51 "/>
-<text text-anchor="middle" x="70.5" y="-118.31" font-family="monospace" font-size="14.00" fill="grey">srv</text>
-<polyline fill="none" stroke="grey" points="50,-110.51 91,-110.51 "/>
-<text text-anchor="middle" x="70.5" y="-95.31" font-family="monospace" font-size="14.00" fill="grey">c2</text>
-</g>
-<!-- server -->
-<g id="node2" class="node">
-<title>server</title>
-<polygon fill="none" stroke="black" points="143.52,-99.01 143.52,-145.01 292.52,-145.01 292.52,-99.01 143.52,-99.01"/>
-<text text-anchor="middle" x="168.52" y="-118.31" font-family="monospace" font-size="14.00">mgmt</text>
-<polyline fill="none" stroke="black" points="193.52,-99.01 193.52,-145.01 "/>
-<text text-anchor="middle" x="226.52" y="-118.31" font-family="monospace" font-size="14.00">server</text>
-<polyline fill="none" stroke="black" points="259.52,-99.01 259.52,-145.01 "/>
-<text text-anchor="middle" x="276.02" y="-129.81" font-family="monospace" font-size="14.00">c1</text>
-<polyline fill="none" stroke="black" points="259.52,-122.01 292.52,-122.01 "/>
-<text text-anchor="middle" x="276.02" y="-106.81" font-family="monospace" font-size="14.00">c2</text>
-</g>
-<!-- host&#45;&#45;server -->
-<g id="edge1" class="edge">
-<title>host:srv&#45;&#45;server:mgmt</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-122.01C91.5,-122.01 143.02,-122.01 143.02,-122.01"/>
-</g>
-<!-- client1 -->
-<g id="node3" class="node">
-<title>client1</title>
-<polygon fill="none" stroke="black" points="135.52,-207.52 135.52,-243.52 300.52,-243.52 300.52,-207.52 135.52,-207.52"/>
-<text text-anchor="middle" x="160.52" y="-221.82" font-family="monospace" font-size="14.00">mgmt</text>
-<polyline fill="none" stroke="black" points="185.52,-207.52 185.52,-243.52 "/>
-<text text-anchor="middle" x="222.52" y="-221.82" font-family="monospace" font-size="14.00">client1</text>
-<polyline fill="none" stroke="black" points="259.52,-207.52 259.52,-243.52 "/>
-<text text-anchor="middle" x="280.02" y="-221.82" font-family="monospace" font-size="14.00">srv</text>
-</g>
-<!-- host&#45;&#45;client1 -->
-<g id="edge2" class="edge">
-<title>host:c1&#45;&#45;client1:mgmt</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-145.01C91.5,-145.01 135.02,-225.52 135.02,-225.52"/>
-</g>
-<!-- client2 -->
-<g id="node4" class="node">
-<title>client2</title>
-<polygon fill="none" stroke="black" points="135.52,-0.5 135.52,-36.5 300.52,-36.5 300.52,-0.5 135.52,-0.5"/>
-<text text-anchor="middle" x="160.52" y="-14.8" font-family="monospace" font-size="14.00">mgmt</text>
-<polyline fill="none" stroke="black" points="185.52,-0.5 185.52,-36.5 "/>
-<text text-anchor="middle" x="222.52" y="-14.8" font-family="monospace" font-size="14.00">client2</text>
-<polyline fill="none" stroke="black" points="259.52,-0.5 259.52,-36.5 "/>
-<text text-anchor="middle" x="280.02" y="-14.8" font-family="monospace" font-size="14.00">srv</text>
-</g>
-<!-- host&#45;&#45;client2 -->
-<g id="edge3" class="edge">
-<title>host:c2&#45;&#45;client2:mgmt</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-99.01C91.5,-99.01 135.02,-18.5 135.02,-18.5"/>
-</g>
-<!-- server&#45;&#45;client1 -->
-<g id="edge4" class="edge">
-<title>server:c1&#45;&#45;client1:srv</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M276.02,-145.01C276.02,-145.01 280.02,-207.52 280.02,-207.52"/>
-</g>
-<!-- server&#45;&#45;client2 -->
-<g id="edge5" class="edge">
-<title>server:c2&#45;&#45;client2:srv</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M276.02,-99.01C276.02,-99.01 280.02,-36.5 280.02,-36.5"/>
-</g>
-</g>
-</svg>

doc/testing-phy.dot.svg

@@ -1,187 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
- "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<!-- Generated by graphviz version 2.43.0 (0)
- -->
-<!-- Title: quad&#45;ring Pages: 1 -->
-<svg width="347pt" height="438pt"
- viewBox="0.00 0.00 346.65 438.04" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
-<g id="graph0" class="graph" transform="scale(1 1) rotate(0) translate(4 434.04)">
-<title>quad&#45;ring</title>
-<polygon fill="white" stroke="transparent" points="-4,4 -4,-434.04 342.65,-434.04 342.65,4 -4,4"/>
-<!-- host -->
-<g id="node1" class="node">
-<title>host</title>
-<polygon fill="none" stroke="grey" points="0,-77.02 0,-353.02 91,-353.02 91,-77.02 0,-77.02"/>
-<text text-anchor="middle" x="25" y="-211.32" font-family="monospace" font-size="14.00" fill="grey">host</text>
-<polyline fill="none" stroke="grey" points="50,-77.02 50,-353.02 "/>
-<text text-anchor="middle" x="70.5" y="-337.82" font-family="monospace" font-size="14.00" fill="grey">d1a</text>
-<polyline fill="none" stroke="grey" points="50,-330.02 91,-330.02 "/>
-<text text-anchor="middle" x="70.5" y="-314.82" font-family="monospace" font-size="14.00" fill="grey">d1b</text>
-<polyline fill="none" stroke="grey" points="50,-307.02 91,-307.02 "/>
-<text text-anchor="middle" x="70.5" y="-291.82" font-family="monospace" font-size="14.00" fill="grey">d1c</text>
-<polyline fill="none" stroke="grey" points="50,-284.02 91,-284.02 "/>
-<text text-anchor="middle" x="70.5" y="-268.82" font-family="monospace" font-size="14.00" fill="grey">d2a</text>
-<polyline fill="none" stroke="grey" points="50,-261.02 91,-261.02 "/>
-<text text-anchor="middle" x="70.5" y="-245.82" font-family="monospace" font-size="14.00" fill="grey">d2b</text>
-<polyline fill="none" stroke="grey" points="50,-238.02 91,-238.02 "/>
-<text text-anchor="middle" x="70.5" y="-222.82" font-family="monospace" font-size="14.00" fill="grey">d2c</text>
-<polyline fill="none" stroke="grey" points="50,-215.02 91,-215.02 "/>
-<text text-anchor="middle" x="70.5" y="-199.82" font-family="monospace" font-size="14.00" fill="grey">d3a</text>
-<polyline fill="none" stroke="grey" points="50,-192.02 91,-192.02 "/>
-<text text-anchor="middle" x="70.5" y="-176.82" font-family="monospace" font-size="14.00" fill="grey">d3b</text>
-<polyline fill="none" stroke="grey" points="50,-169.02 91,-169.02 "/>
-<text text-anchor="middle" x="70.5" y="-153.82" font-family="monospace" font-size="14.00" fill="grey">d3c</text>
-<polyline fill="none" stroke="grey" points="50,-146.02 91,-146.02 "/>
-<text text-anchor="middle" x="70.5" y="-130.82" font-family="monospace" font-size="14.00" fill="grey">d4a</text>
-<polyline fill="none" stroke="grey" points="50,-123.02 91,-123.02 "/>
-<text text-anchor="middle" x="70.5" y="-107.82" font-family="monospace" font-size="14.00" fill="grey">d4b</text>
-<polyline fill="none" stroke="grey" points="50,-100.02 91,-100.02 "/>
-<text text-anchor="middle" x="70.5" y="-84.82" font-family="monospace" font-size="14.00" fill="grey">d4c</text>
-</g>
-<!-- dut1 -->
-<g id="node2" class="node">
-<title>dut1</title>
-<polygon fill="none" stroke="black" points="187.52,-360.54 187.52,-429.54 303.52,-429.54 303.52,-360.54 187.52,-360.54"/>
-<text text-anchor="middle" x="204.02" y="-414.34" font-family="monospace" font-size="14.00">e1</text>
-<polyline fill="none" stroke="black" points="187.52,-406.54 220.52,-406.54 "/>
-<text text-anchor="middle" x="204.02" y="-391.34" font-family="monospace" font-size="14.00">e2</text>
-<polyline fill="none" stroke="black" points="187.52,-383.54 220.52,-383.54 "/>
-<text text-anchor="middle" x="204.02" y="-368.34" font-family="monospace" font-size="14.00">e3</text>
-<polyline fill="none" stroke="black" points="220.52,-360.54 220.52,-429.54 "/>
-<text text-anchor="middle" x="245.52" y="-391.34" font-family="monospace" font-size="14.00">dut1</text>
-<polyline fill="none" stroke="black" points="270.52,-360.54 270.52,-429.54 "/>
-<text text-anchor="middle" x="287.02" y="-408.84" font-family="monospace" font-size="14.00">e4</text>
-<polyline fill="none" stroke="black" points="270.52,-395.54 303.52,-395.54 "/>
-<text text-anchor="middle" x="287.02" y="-374.34" font-family="monospace" font-size="14.00">e5</text>
-</g>
-<!-- host&#45;&#45;dut1 -->
-<g id="edge1" class="edge">
-<title>host:d1a&#45;&#45;dut1:e1</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-342.02C91.5,-342.02 187.52,-418.04 187.52,-418.04"/>
-</g>
-<!-- host&#45;&#45;dut1 -->
-<g id="edge5" class="edge">
-<title>host:d1b&#45;&#45;dut1:e2</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-319.02C91.5,-319.02 187.52,-395.04 187.52,-395.04"/>
-</g>
-<!-- host&#45;&#45;dut1 -->
-<g id="edge9" class="edge">
-<title>host:d1c&#45;&#45;dut1:e3</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-296.02C91.5,-296.02 187.52,-372.04 187.52,-372.04"/>
-</g>
-<!-- dut2 -->
-<g id="node3" class="node">
-<title>dut2</title>
-<polygon fill="none" stroke="black" points="187.52,-240.52 187.52,-309.52 303.52,-309.52 303.52,-240.52 187.52,-240.52"/>
-<text text-anchor="middle" x="204.02" y="-294.32" font-family="monospace" font-size="14.00">e1</text>
-<polyline fill="none" stroke="black" points="187.52,-286.52 220.52,-286.52 "/>
-<text text-anchor="middle" x="204.02" y="-271.32" font-family="monospace" font-size="14.00">e2</text>
-<polyline fill="none" stroke="black" points="187.52,-263.52 220.52,-263.52 "/>
-<text text-anchor="middle" x="204.02" y="-248.32" font-family="monospace" font-size="14.00">e3</text>
-<polyline fill="none" stroke="black" points="220.52,-240.52 220.52,-309.52 "/>
-<text text-anchor="middle" x="245.52" y="-271.32" font-family="monospace" font-size="14.00">dut2</text>
-<polyline fill="none" stroke="black" points="270.52,-240.52 270.52,-309.52 "/>
-<text text-anchor="middle" x="287.02" y="-288.82" font-family="monospace" font-size="14.00">e4</text>
-<polyline fill="none" stroke="black" points="270.52,-275.52 303.52,-275.52 "/>
-<text text-anchor="middle" x="287.02" y="-254.32" font-family="monospace" font-size="14.00">e5</text>
-</g>
-<!-- host&#45;&#45;dut2 -->
-<g id="edge2" class="edge">
-<title>host:d2a&#45;&#45;dut2:e1</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-273.02C91.5,-273.02 187.52,-298.02 187.52,-298.02"/>
-</g>
-<!-- host&#45;&#45;dut2 -->
-<g id="edge6" class="edge">
-<title>host:d2b&#45;&#45;dut2:e2</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-250.02C91.5,-250.02 187.52,-275.02 187.52,-275.02"/>
-</g>
-<!-- host&#45;&#45;dut2 -->
-<g id="edge10" class="edge">
-<title>host:d2c&#45;&#45;dut2:e3</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-227.02C91.5,-227.02 187.52,-252.02 187.52,-252.02"/>
-</g>
-<!-- dut3 -->
-<g id="node4" class="node">
-<title>dut3</title>
-<polygon fill="none" stroke="black" points="187.52,-120.51 187.52,-189.51 303.52,-189.51 303.52,-120.51 187.52,-120.51"/>
-<text text-anchor="middle" x="204.02" y="-174.31" font-family="monospace" font-size="14.00">e1</text>
-<polyline fill="none" stroke="black" points="187.52,-166.51 220.52,-166.51 "/>
-<text text-anchor="middle" x="204.02" y="-151.31" font-family="monospace" font-size="14.00">e2</text>
-<polyline fill="none" stroke="black" points="187.52,-143.51 220.52,-143.51 "/>
-<text text-anchor="middle" x="204.02" y="-128.31" font-family="monospace" font-size="14.00">e3</text>
-<polyline fill="none" stroke="black" points="220.52,-120.51 220.52,-189.51 "/>
-<text text-anchor="middle" x="245.52" y="-151.31" font-family="monospace" font-size="14.00">dut3</text>
-<polyline fill="none" stroke="black" points="270.52,-120.51 270.52,-189.51 "/>
-<text text-anchor="middle" x="287.02" y="-168.81" font-family="monospace" font-size="14.00">e4</text>
-<polyline fill="none" stroke="black" points="270.52,-155.51 303.52,-155.51 "/>
-<text text-anchor="middle" x="287.02" y="-134.31" font-family="monospace" font-size="14.00">e5</text>
-</g>
-<!-- host&#45;&#45;dut3 -->
-<g id="edge3" class="edge">
-<title>host:d3a&#45;&#45;dut3:e1</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-203.02C91.5,-203.02 187.52,-178.01 187.52,-178.01"/>
-</g>
-<!-- host&#45;&#45;dut3 -->
-<g id="edge7" class="edge">
-<title>host:d3b&#45;&#45;dut3:e2</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-180.02C91.5,-180.02 187.52,-155.01 187.52,-155.01"/>
-</g>
-<!-- host&#45;&#45;dut3 -->
-<g id="edge11" class="edge">
-<title>host:d3c&#45;&#45;dut3:e3</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-157.02C91.5,-157.02 187.52,-132.01 187.52,-132.01"/>
-</g>
-<!-- dut4 -->
-<g id="node5" class="node">
-<title>dut4</title>
-<polygon fill="none" stroke="black" points="187.52,-0.5 187.52,-69.5 303.52,-69.5 303.52,-0.5 187.52,-0.5"/>
-<text text-anchor="middle" x="204.02" y="-54.3" font-family="monospace" font-size="14.00">e1</text>
-<polyline fill="none" stroke="black" points="187.52,-46.5 220.52,-46.5 "/>
-<text text-anchor="middle" x="204.02" y="-31.3" font-family="monospace" font-size="14.00">e2</text>
-<polyline fill="none" stroke="black" points="187.52,-23.5 220.52,-23.5 "/>
-<text text-anchor="middle" x="204.02" y="-8.3" font-family="monospace" font-size="14.00">e3</text>
-<polyline fill="none" stroke="black" points="220.52,-0.5 220.52,-69.5 "/>
-<text text-anchor="middle" x="245.52" y="-31.3" font-family="monospace" font-size="14.00">dut4</text>
-<polyline fill="none" stroke="black" points="270.52,-0.5 270.52,-69.5 "/>
-<text text-anchor="middle" x="287.02" y="-48.8" font-family="monospace" font-size="14.00">e4</text>
-<polyline fill="none" stroke="black" points="270.52,-35.5 303.52,-35.5 "/>
-<text text-anchor="middle" x="287.02" y="-14.3" font-family="monospace" font-size="14.00">e5</text>
-</g>
-<!-- host&#45;&#45;dut4 -->
-<g id="edge4" class="edge">
-<title>host:d4a&#45;&#45;dut4:e1</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-134.02C91.5,-134.02 187.52,-58 187.52,-58"/>
-</g>
-<!-- host&#45;&#45;dut4 -->
-<g id="edge8" class="edge">
-<title>host:d4b&#45;&#45;dut4:e2</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-111.02C91.5,-111.02 187.52,-35 187.52,-35"/>
-</g>
-<!-- host&#45;&#45;dut4 -->
-<g id="edge12" class="edge">
-<title>host:d4c&#45;&#45;dut4:e3</title>
-<path fill="none" stroke="grey" stroke-width="2" d="M91.5,-88.02C91.5,-88.02 187.52,-12 187.52,-12"/>
-</g>
-<!-- dut1&#45;&#45;dut2 -->
-<g id="edge13" class="edge">
-<title>dut1:e5&#45;&#45;dut2:e4</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M287.52,-360.04C287.52,-360.04 287.52,-310.02 287.52,-310.02"/>
-</g>
-<!-- dut2&#45;&#45;dut3 -->
-<g id="edge14" class="edge">
-<title>dut2:e5&#45;&#45;dut3:e4</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M287.52,-240.02C287.52,-240.02 287.52,-190.01 287.52,-190.01"/>
-</g>
-<!-- dut3&#45;&#45;dut4 -->
-<g id="edge15" class="edge">
-<title>dut3:e5&#45;&#45;dut4:e4</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M287.52,-120.01C287.52,-120.01 287.52,-70 287.52,-70"/>
-</g>
-<!-- dut4&#45;&#45;dut1 -->
-<g id="edge16" class="edge">
-<title>dut4:e5&#45;&#45;dut1:e4</title>
-<path fill="none" stroke="cornflowerblue" stroke-width="2" d="M303.6,-18.06C303.6,-18.06 319.05,-56.84 323.52,-89.5 338.65,-200.04 338.45,-229.97 323.52,-340.54 319.05,-373.62 303.59,-412.97 303.59,-412.97"/>
-</g>
-</g>
-</svg>