mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-30 04:33:00 +02:00
Jon-Olov Vatn
e3c6f749ad
- Add section on upgrading/downgrading and boot-order to system.md - Add or update references on upgrading from other pages - boot.md (update ref) - cli/upgrade.md (add ref) - management.md (add ref) [skip ci]
51 lines
1.8 KiB
Markdown
51 lines
1.8 KiB
Markdown
Upgrading the Software
|
|
----------------------
|
|
|
|
The admin-exec command `upgrade` can be used to install software images, or
|
|
bundles. A bundle is a signed and self-contained package that carries all the
|
|
information necessary to determine if it holds a bootloader, a Linux image, or
|
|
even both.
|
|
|
|
To install a new software image to the currently *inactive* partition[^1], we
|
|
use the `upgrade` command and a URI to a ftp/tftp/sftp or http/https server
|
|
that hosts the file:
|
|
|
|
```
|
|
admin@host:/> upgrade tftp://192.168.122.1/firmware-x86_64-v23.11.pkg
|
|
installing
|
|
0% Installing
|
|
0% Determining slot states
|
|
20% Determining slot states done.
|
|
20% Checking bundle
|
|
20% Verifying signature
|
|
40% Verifying signature done.
|
|
40% Checking bundle done.
|
|
40% Checking manifest contents
|
|
60% Checking manifest contents done.
|
|
60% Determining target install group
|
|
80% Determining target install group done.
|
|
80% Updating slots
|
|
80% Checking slot rootfs.1
|
|
90% Checking slot rootfs.1 done.
|
|
90% Copying image to rootfs.1
|
|
99% Copying image to rootfs.1 done.
|
|
99% Updating slots done.
|
|
100% Installing done.
|
|
Installing `tftp://192.168.122.1/firmware-x86_64-v23.11.pkg` succeeded
|
|
admin@host:/>
|
|
```
|
|
|
|
The secondary partition (`rootfs.1`) has now been upgraded and will be used as
|
|
the *active* partition on the next boot. Leaving the primary partition, with
|
|
the version we are currently running, intact in case of trouble.
|
|
|
|
See [upgrading procedures and boot order][2] for more information on
|
|
upgrading.
|
|
|
|
[^1]: It is not possible to upgrade the partition we booted from. Thankfully
|
|
the underlying "rauc" subsystem keeps track of this. Hence, to upgrade
|
|
both partitions you must reboot to the new version (to verify it works)
|
|
and then repeat the same command.
|
|
|
|
[2]: ../system.md#upgrade-procedures-and-boot-order
|