mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-31 21:13:00 +02:00
52 lines
1.5 KiB
Markdown
52 lines
1.5 KiB
Markdown
# Hardware information and status
|
|
|
|
The hardware infomation and status is handled by the YANG model [IETF hardware][ietf-hardware].
|
|
with deviations and augmentations in _infix-hardware_.
|
|
|
|
## USB Ports
|
|
For infix to be able to control the USB port(s), a device tree modification is needed (see _alder.dtsi_ for full example).
|
|
```
|
|
chosen {
|
|
infix {
|
|
usb-ports = <&cp0_usb3_1>;
|
|
usb-port-names = "USB";
|
|
};
|
|
};
|
|
```
|
|
Two USB ports are also exposed in QEMU for test purpose.
|
|
|
|
All USB ports in the system will be disabled during boot due to the file _board/common/rootfs/etc/modprobe.d/usbcore.conf_.
|
|
If you not want Infix to controll the USB port(s), remove the file or manually enable the USB bus, here is an example:
|
|
|
|
```
|
|
# Enable the bus
|
|
echo 1 > /sys/bus/usb/devices/usb1/authorized
|
|
```
|
|
And then enable sub-devices (e.g. USB memory)
|
|
```
|
|
# Enable a device plugged into usb1
|
|
echo 1 > /sys/bus/usb/devices/usb1/1-1/authorized
|
|
```
|
|
|
|
### Current status
|
|
```
|
|
admin@example:/> show hardware
|
|
USB PORTS
|
|
NAME STATE
|
|
USB unlocked
|
|
```
|
|
An USB port can be in two states _unlocked_ and _locked_. When a port is locked,
|
|
all connected devices will get power, but never authorized by Linux to use.
|
|
|
|
### Configure USB port
|
|
> **Note:** You can only configure an USB ports that exist in _show hardware_ in admin exec.
|
|
|
|
```
|
|
root@example:/> configure
|
|
root@example:/config/> set hardware component USB state admin-state unlocked
|
|
root@example:/config/> leave
|
|
root@example:/>
|
|
```
|
|
|
|
[ietf-hardware]: https://www.rfc-editor.org/rfc/rfc8348.html
|