Merge pull request #1000 from kernelkit/logging-fixes

Misc. fixes related to logging found in -rc1
doc: update ChangeLog with fixes for -rc1 issues
2026-07-22 09:13:01 +02:00 · 2025-03-31 15:08:10 +02:00 · 2025-03-31 13:49:34 +02:00 · 2025-03-31 13:43:19 +02:00 · 2025-03-31 13:35:44 +02:00 · 2025-03-31 13:14:34 +02:00
1017 changed files with 50199 additions and 15874 deletions
@@ -0,0 +1,26 @@
+# Security Policy
+
+## Reporting a Vulnerability
+
+If you discover a security vulnerability in Infix, please use GitHub's built-in
+[Report a Vulnerability](https://github.com/kernelkit/infix/security/advisories/new)
+feature for a private and secure disclosure.
+
+When reporting, include:
+
+- A clear description of the vulnerability.
+- Steps to reproduce the issue.
+- Potential impact of the vulnerability.
+
+## Supported Versions
+
+We provide security updates only for the main branch.
+
+Individual support contracts are provided by _Wires_. See
+[Support](https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md)
+for more information.
+
+## Acknowledgments
+
+We appreciate the efforts of the security community to help improve the security
+of Infix. Thank you for your responsible disclosure.
@@ -6,7 +6,7 @@ project on GitHub, and Discord, see <https://github.com/kernelkit>:

 Support contracts, development of new features, fast-tracking of reviews
 and contributions, customer branding of Infix, and even customer specific
-features for dedicated products is provided by Addiva Elektronik.
+features for dedicated products is provided by _Wires_.

-&nbsp;&nbsp; :globe_with_meridians: <https://www.addiva.se/electronics/>  
-&nbsp;&nbsp; :e-mail: <mailto:ael@addiva.se>
+&nbsp;&nbsp; :globe_with_meridians: <https://www.wires.se>  
+&nbsp;&nbsp; :e-mail: <mailto:infix@wires.se>
@@ -22,6 +22,8 @@ jobs:
      matrix:
        target: [aarch64, x86_64]
      fail-fast: false
+    outputs:
+      build_id: ${{ steps.vars.outputs.INFIX_BUILD_ID }}
    steps:
      - name: Cleanup Build Folder
        run: |
@@ -33,11 +35,22 @@ jobs:
      - uses: actions/checkout@v4
        with:
          clean: true
+          fetch-depth: 0
          submodules: recursive

      - name: Set Build Variables
        id: vars
        run: |
+          if [ -n "${{ github.event.pull_request.head.sha }}" ]; then
+              # Since PRs are built from an internally generated merge
+              # commit, reverse lookups of PRs and/or commits from
+              # image version information are cumbersome.  Therefore:
+              # explicitly set a build id that references both the PR
+              # and the commit.
+              printf "INFIX_BUILD_ID=pr%d.%.7s\n" \
+                  "${{ github.event.number }}" "${{ github.event.pull_request.head.sha }}" \
+                  | tee -a $GITHUB_OUTPUT $GITHUB_ENV
+          fi
          if [ "${{ github.event_name }}" == "workflow_dispatch" ]; then
              if [ "${{ github.event.inputs.minimal }}" == "true" ]; then
                  flavor="_minimal"
@@ -112,7 +125,7 @@ jobs:
          cd output/
          mv images ${{ steps.vars.outputs.dir }}
          ln -s ${{ steps.vars.outputs.dir }} images
-          tar chfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}

      - uses: actions/upload-artifact@v4
        with:
@@ -132,6 +145,11 @@ jobs:
      - name: Set Build Variables
        id: vars
        run: |
+          if [ -n "${{ needs.build.outputs.build_id }}" ]; then
+              echo "INFIX_BUILD_ID=${{ needs.build.outputs.build_id }}" \
+                   >>$GITHUB_ENV
+          fi
+
          if [ "$GITHUB_REF_NAME" != "main" ]; then
              flavor="_minimal"
          else
@@ -166,6 +184,22 @@ jobs:
        if: always()
        run: cat test/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY

+      - name: Generate Test Report for x86_64${{ steps.vars.outputs.flv }}
+        # Ensure this runs even if Regression Test fails
+        if: always()
+        run: |
+          asciidoctor-pdf \
+          --theme test/9pm/report/theme.yml \
+          -a pdf-fontsdir=test/9pm/report/fonts \
+          test/.log/last/report.adoc \
+          -o test/.log/last/report.pdf
+
+      - name: Upload Test Report as Artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: test-report
+          path: test/.log/last/report.pdf
+
  release:
    if: ${{github.repository_owner == 'kernelkit' && github.ref_name == 'main'}}
    name: Upload Latest Build
@@ -55,7 +55,7 @@ jobs:
          sudo apt-get -y update
          sudo apt-get -y install pkg-config libjansson-dev libev-dev \
                       libcrypt-dev libglib2.0-dev libpcre2-dev       \
-                       libuev-dev libite-dev
+                       libuev-dev

      - name: Build dependencies
        run: |
@@ -65,6 +65,8 @@ jobs:
          git clone https://github.com/sysrepo/sysrepo.git
          mkdir sysrepo/build
          (cd sysrepo/build && cmake .. && make all && sudo make install)
+          git clone https://github.com/troglobit/libite.git
+          (cd libite && ./autogen.sh && ./configure && make && sudo make install)
          make dep

      - name: Check applications
@@ -85,10 +85,10 @@ jobs:
          cd output/
          mv images ${{ steps.vars.outputs.dir }}
          ln -s ${{ steps.vars.outputs.dir }} images
-          tar chfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}

          mv legal-info legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
-          tar chfz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}.tar.gz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
+          tar cfz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}.tar.gz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}

      - uses: actions/upload-artifact@v4
        with:
@@ -8,3 +8,4 @@
 /test/.venv
 /test/.log
 /local.mk
+/test/spec/Readme.adoc
@@ -27,13 +27,13 @@ it maintenance-free.  Configuration and data, e.g, containers, is stored
 on separate partitions to ensure complete separation from system files
 and allow for seamless backup, restore, and provisioning.

-In itself Infix is perfectly suited for dedicated networking tasks and
-native support for Docker containers provides a versatile platform that
-can easily be adapted to any customer need.  Be it legacy applications,
-network protocols, process monitoring, or edge data analysis, it can run
-close to end equipment.  Either directly connected on dedicated Ethernet
-ports or indirectly using virtual network cables to exist on the same
-LAN as other connected equipment.
+In itself, Infix is perfectly suited for dedicated networking tasks, and
+with native support for Docker containers, the operating system provides
+a versatile platform that can easily be adapted to any customer need.
+Be it legacy applications, network protocols, process monitoring, or
+edge data analysis, it can run close to end equipment.  Either directly
+connected on dedicated Ethernet ports or indirectly using virtual
+network cables to exist on the same LAN as other connected equipment.

 The simple design of Infix provides complete control over both system
 and data, minimal cognitive burden, and makes it incredibly easy to get
@@ -106,6 +106,16 @@ more information, see: [Infix in Virtual Environments](doc/virtual.md).
 >
 > For *customer specific builds* of Infix, see your product repository.

+
+----
+
+<div align="center">
+  <a href="https://github.com/wires-se"><img src="https://raw.githubusercontent.com/wires-se/.github/main/profile/logo.png" width=300></a>
+  <br />Infix development is sponsored by <a href="https://wires.se">Wires<a>
+</div>
+
+----
+
 [^1]: An immutable operating system is one with read-only file systems,
    atomic updates, rollbacks, declarative configuration, and workload
    isolation.  All to improve reliability, scalability, and security.
@@ -128,5 +128,9 @@ SD-card partition.
 > If possible, serve `infix-aarch64.pkg` over HTTP instead, as
 > libcurl's TFTP implementation is quite slow.

+## Console Port
+
+The console port runs at 115200 baud, 8N1.
+
 [release]: https://github.com/kernelkit/infix/releases
 [mvebu64boot]: https://github.com/addiva-elektronik/mvebu64boot
@@ -34,6 +34,10 @@ CONFIG_PROFILING=y
 CONFIG_ARCH_SPARX5=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARM64_ERRATUM_2441007=y
+CONFIG_ARM64_ERRATUM_1286807=y
+CONFIG_ARM64_ERRATUM_1542419=y
+CONFIG_ARM64_ERRATUM_2441009=y
 CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_NR_CPUS=64
@@ -57,6 +61,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
+CONFIG_CMA_AREAS=7
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_XDP_SOCKETS=y
@@ -165,7 +170,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_BPFILTER=y
 CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_BRIDGE_MRP=y
@@ -227,6 +231,7 @@ CONFIG_SCSI_SAS_ATA=y
 CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
+CONFIG_SATA_MOBILE_LPM_POLICY=0
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_PATA_OF_PLATFORM=y
@@ -282,6 +287,7 @@ CONFIG_NET_DSA_MV88E6XXX_PTP=y
 CONFIG_MVNETA=m
 CONFIG_MVPP2=m
 # CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_META is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 CONFIG_SPARX5_SWITCH=y
 # CONFIG_NET_VENDOR_MICROSEMI is not set
@@ -353,13 +359,14 @@ CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_SERIAL_MVEBU_UART=y
 CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_CN10K=m
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_GPIO=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_SLAVE=y
 CONFIG_SPI=y
@@ -495,6 +502,7 @@ CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
 CONFIG_TI_ADC081C=y
 CONFIG_PWM=y
+CONFIG_RESET_GPIO=y
 CONFIG_PHY_MVEBU_CP110_COMPHY=y
 CONFIG_PHY_MVEBU_CP110_UTMI=y
 CONFIG_PHY_SAMSUNG_USB2=y
@@ -523,13 +531,13 @@ CONFIG_9P_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_SECURITY=y
+CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,bpf"
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=0
@@ -101,6 +101,13 @@ Worth noting, unlike many other boards, the Rockchip family of chipsets
 runs the UART at 1500000 bps (1.5 Mbps) 8N1.


+Console Port
+------------
+
+Unlike many other boards, the NanoPi R2S console, and in fact all
+Rockchip family chipsets, runs at 1500000 bps (1.5 Mbps) 8N1. 
+
+
 Secure Boot
 -----------

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Busybox version: 1.36.1
-# Tue Oct 22 13:12:02 2024
+# Sun Feb  9 12:25:37 2025
 #
 CONFIG_HAVE_DOT_CONFIG=y

@@ -17,7 +17,7 @@ CONFIG_SHOW_USAGE=y
 CONFIG_FEATURE_VERBOSE_USAGE=y
 # CONFIG_FEATURE_COMPRESS_USAGE is not set
 CONFIG_LFS=y
-# CONFIG_PAM is not set
+CONFIG_PAM=y
 CONFIG_FEATURE_DEVPTS=y
 CONFIG_FEATURE_UTMP=y
 CONFIG_FEATURE_WTMP=y
@@ -325,7 +325,7 @@ CONFIG_FEATURE_STAT_FILESYSTEM=y
 CONFIG_STTY=y
 CONFIG_SUM=y
 CONFIG_SYNC=y
-# CONFIG_FEATURE_SYNC_FANCY is not set
+CONFIG_FEATURE_SYNC_FANCY=y
 CONFIG_FSYNC=y
 # CONFIG_TAC is not set
 CONFIG_TAIL=y
@@ -336,7 +336,7 @@ CONFIG_TEST=y
 CONFIG_TEST1=y
 CONFIG_TEST2=y
 CONFIG_FEATURE_TEST_64=y
-# CONFIG_TIMEOUT is not set
+CONFIG_TIMEOUT=y
 CONFIG_TOUCH=y
 CONFIG_FEATURE_TOUCH_SUSV3=y
 CONFIG_TR=y
@@ -357,7 +357,7 @@ CONFIG_BASE32=y
 CONFIG_BASE64=y
 CONFIG_UUENCODE=y
 CONFIG_WC=y
-# CONFIG_FEATURE_WC_LARGE is not set
+CONFIG_FEATURE_WC_LARGE=y
 CONFIG_WHO=y
 CONFIG_W=y
 CONFIG_USERS=y
@@ -2,8 +2,6 @@

 set -e

-GIT_VERSION=$(git -C "$BR2_EXTERNAL_INFIX_PATH" describe --always --dirty --tags)
-
 name=$1
 compat=$2
 sign=$3
@@ -26,7 +24,7 @@ cp -f "$BINARIES_DIR/rootfs.itbh"     "$work/rootfs.itbh"
 cat >"$work/manifest.raucm" <<EOF
 [update]
 compatible=${compat}
-version=${GIT_VERSION}
+version=${INFIX_VERSION}

 [bundle]
 format=verity
@@ -39,22 +39,6 @@ if [ -n "${ID_LIKE}" ]; then
    ID="${ID} ${ID_LIKE}"
 fi

-if [ -z "$GIT_VERSION" ]; then
-    infix_path="$BR2_EXTERNAL_INFIX_PATH"
-    if [ -n "$INFIX_OEM_PATH" ]; then
-	# Use version from br2-external OEM:ing Infix
-	infix_path="$INFIX_OEM_PATH"
-    fi
-    GIT_VERSION=$(git -C "$infix_path" describe --always --dirty --tags)
-fi
-
-# Override VERSION in /etc/os-release and filenames for release builds
-if [ -n "$INFIX_RELEASE" ]; then
-    VERSION="$INFIX_RELEASE"
-else
-    VERSION=$GIT_VERSION
-fi
-
 if [ -n "$INFIX_IMAGE_ID" ]; then
    NAME="$INFIX_IMAGE_ID"
 else
@@ -71,12 +55,12 @@ rm -f "$TARGET_DIR/etc/os-release"
 {
    echo "NAME=\"$INFIX_NAME\""
    echo "ID=$INFIX_ID"
-    echo "PRETTY_NAME=\"$INFIX_TAGLINE $VERSION\""
+    echo "PRETTY_NAME=\"$INFIX_TAGLINE $INFIX_VERSION\""
    echo "ID_LIKE=\"${ID}\""
    echo "DEFAULT_HOSTNAME=$BR2_TARGET_GENERIC_HOSTNAME"
-    echo "VERSION=\"${VERSION}\""
-    echo "VERSION_ID=${VERSION}"
-    echo "BUILD_ID=\"${GIT_VERSION}\""
+    echo "VERSION=\"${INFIX_VERSION}\""
+    echo "VERSION_ID=${INFIX_VERSION}"
+    echo "BUILD_ID=\"${INFIX_BUILD_ID}\""
    if [ -n "$INFIX_IMAGE_ID" ]; then
 	echo "IMAGE_ID=\"$INFIX_IMAGE_ID\""
    fi
@@ -102,7 +86,7 @@ rm -f "$TARGET_DIR/etc/os-release"
    fi
 } > "$TARGET_DIR/etc/os-release"

-echo "$INFIX_TAGLINE $VERSION -- $(date +"%b %e %H:%M %Z %Y")" > "$TARGET_DIR/etc/version"
+echo "$INFIX_TAGLINE $INFIX_VERSION -- $(date +"%b %e %H:%M %Z %Y")" > "$TARGET_DIR/etc/version"

 # In case of ambguities, this is what the image was built from
 cp "$BR2_CONFIG" "$TARGET_DIR/usr/share/infix/config"
@@ -66,7 +66,7 @@ endchoice

 config QEMU_MACHINE
 	string "Select emulated machine"
-	default "qemu-system-aarch64 -M virt,accel=kvm:tcg -cpu max" if QEMU_aarch64
+	default "qemu-system-aarch64 -M virt,accel=kvm:tcg -cpu max,pauth-impdef=on" if QEMU_aarch64
 	default "qemu-system-x86_64  -M pc,accel=kvm:tcg   -cpu max" if QEMU_x86_64
 	help
 	  You should not have to change this setting, although you may
@@ -189,7 +189,7 @@ config QEMU_CLOCK
 comment "Networking"

 choice
-     prompt "Mode"
+     prompt "Network Mode"
     default QEMU_NET_USER

 config QEMU_NET_NONE
@@ -204,6 +204,9 @@ config QEMU_NET_USER
 config QEMU_NET_TAP
     bool "TAP"

+config QEMU_NET_ROCKER
+     bool "Rocker"
+
 endchoice

 config QEMU_NET_MODEL
@@ -229,3 +232,8 @@ config QEMU_NET_TAP_N
 	int "Number of TAPs"
 	depends on QEMU_NET_TAP
 	default 1
+
+config QEMU_NET_PORTS
+	int "Number of Rocker switch ports"
+	depends on QEMU_NET_ROCKER
+	default 10
@@ -17,9 +17,10 @@
 #
 #    ./qemu.sh -h
 #
+# shellcheck disable=SC3037

 # Local variables
-imgdir=$(readlink -f $(dirname "$0"))
+imgdir=$(readlink -f "$(dirname "$0")")
 prognm=$(basename "$0")

 usage()
@@ -30,6 +31,7 @@ usage()
    echo "Options:"
    echo "  -c     Run menuconfig to change Qemu settings"
    echo "  -h     This help text"
+    echo "  -k     Keep generated qemu.run script (name shown at end)"
    echo
    echo "Arguments:"
    echo "  ARGS1  Args before the '--' separator are for kernel space"
@@ -54,19 +56,20 @@ die()

 load_qemucfg()
 {
-    local tmp=$(mktemp -p /tmp)
+    tmp=$(mktemp -p /tmp)

-    grep ^CONFIG_QEMU_ $1 >$tmp
-    .  $tmp
-    rm $tmp
+    grep ^CONFIG_QEMU_ "$1" >"$tmp"
+    # shellcheck disable=SC1090
+    .  "$tmp"
+    rm "$tmp"

    [ "$CONFIG_QEMU_MACHINE" ] || die "Missing QEMU_MACHINE"
    [ "$CONFIG_QEMU_ROOTFS"  ] || die "Missing QEMU_ROOTFS"

-    [ "$CONFIG_QEMU_KERNEL" -a "$CONFIG_QEMU_BIOS" ] \
+    [ -n "$CONFIG_QEMU_KERNEL" ] && [ -n "$CONFIG_QEMU_BIOS" ] \
 	&& die "QEMU_KERNEL conflicts with QEMU_BIOS"

-    [ ! "$CONFIG_QEMU_KERNEL" -a ! "$CONFIG_QEMU_BIOS" ] \
+    [ -z "$CONFIG_QEMU_KERNEL" ] && [ -z "$CONFIG_QEMU_BIOS" ] \
 	&& die "QEMU_KERNEL or QEMU_BIOS must be set"
 }

@@ -93,7 +96,7 @@ append_args()

    if [ "$CONFIG_QEMU_ROOTFS_INITRD" = "y" ]; then
 	# Size of initrd, rounded up to nearest kb
-	local size=$((($(stat -c %s $CONFIG_QEMU_ROOTFS) + 1023) >> 10))
+	size=$((($(stat -c %s "$CONFIG_QEMU_ROOTFS") + 1023) >> 10))
 	echo -n "root=/dev/ram0 ramdisk_size=${size} "
    elif [ "$CONFIG_QEMU_ROOTFS_VSCSI" = "y" ]; then
 	echo -n "root=PARTLABEL=primary "
@@ -198,13 +201,24 @@ host_args()

 net_dev_args()
 {
-    local name="e$1"
-    local mac=$(printf "02:00:00:00:00:%02x" $1)
+    name="e$1"
+    mac=$(printf "02:00:00:00:00:%02x" "$1")

    echo -n "-device $CONFIG_QEMU_NET_MODEL,netdev=$name,mac=$mac "
    echo "$name	$mac" >>"$mactab"
 }

+rocker_port_args()
+{
+    sw=$1
+    port=$2
+    name="sw${sw}p${port}"
+    mac=$(printf "02:00:00:00:%02x:%02x" "$sw" "$port")
+
+    echo -n "-netdev tap,id=$name,ifname=$name,script=no,downscript=no "
+    echo "$name	$mac" >> "$mactab"
+}
+
 net_args()
 {
    # Infix will pick up this file via fwcfg and install it to /etc
@@ -216,14 +230,25 @@ net_args()
 	echo -n "-netdev bridge,id=e1,br=$CONFIG_QEMU_NET_BRIDGE_DEV "
 	net_dev_args 1
    elif [ "$CONFIG_QEMU_NET_TAP" = "y" ]; then
-	for i in $(seq 1 $(($CONFIG_QEMU_NET_TAP_N))); do
+	for i in $(seq 1 "$CONFIG_QEMU_NET_TAP_N"); do
 	    echo -n "-netdev tap,id=e$i,ifname=qtap$i "
-	    net_dev_args $i
+	    net_dev_args "$i"
+	done
+    elif [ "$CONFIG_QEMU_NET_ROCKER" = "y" ]; then
+	sw=sw0			# Only single switch support atm.
+	echo -n "-device '{\"driver\":\"rocker\", \"name\":\"${sw}\", "
+	echo -n "\"fp_start_macaddr\":\"02:00:00:00:00:01\", "
+	echo -n "\"ports\":["
+	for i in $(seq 1 "$CONFIG_QEMU_NET_PORTS"); do
+	    [ "$i" -gt 1 ] && echo -n ", "
+	    echo -n "\"${sw}p${i}\""
+	done
+	echo -n "]}' "
+	for i in $(seq 1 "$CONFIG_QEMU_NET_PORTS"); do
+	    rocker_port_args 0 "$i"
 	done
    elif [ "$CONFIG_QEMU_NET_USER" = "y" ]; then
-	local useropts=
 	[ "$CONFIG_QEMU_NET_USER_OPTS" ] && useropts=",$CONFIG_QEMU_NET_USER_OPTS"
-
 	echo -n "-netdev user,id=e1${useropts} "
 	net_dev_args 1
    else
@@ -301,8 +326,7 @@ run_qemu()
 	fi
    fi

-    local qemu
-    read qemu <<EOF
+    read -r qemu <<EOF
 	$CONFIG_QEMU_MACHINE -nodefaults -m $CONFIG_QEMU_MACHINE_RAM \
 	  $(loader_args) \
 	  $(rootfs_args) \
@@ -317,18 +341,28 @@ run_qemu()
 	  $(gdb_args) \
 	  $CONFIG_QEMU_EXTRA
 EOF
+    # Save resulting command to a script, because I cannot for the life
+    # of me figure out how to embed the JSON snippet for Rocker and run
+    # it here without issues, spent way too much time on it -- Joachim
+    run=$(mktemp -t run.qemu.XXX)
+    echo "#!/bin/sh" > "$run"
+    if [ "$CONFIG_QEMU_KERNEL" ]; then
+	echo "$qemu -append \"$(append_args)\" $*" >> "$run"
+    else
+	echo "$qemu $*" >> "$run"
+    fi
+    chmod +x "$run"

    echo "Starting Qemu  ::  Ctrl-a x -- exit | Ctrl-a c -- toggle console/monitor"
    line=$(stty -g)
    stty raw
-
-    if [ "$CONFIG_QEMU_KERNEL" ]; then
-	$qemu -append "$(append_args)" "$@"
-    else
-	$qemu "$@"
-    fi
-
+    $run
    stty "$line"
+    if [ -n "$keep" ]; then
+	echo "Keeping generated qemu.run script: $run"
+    else
+	rm "$run"
+    fi
 }

 dtb_args()
@@ -364,7 +398,7 @@ generate_dot()
    hostports="<qtap1> qtap1"
    targetports="<e1> e1"
    edges="host:qtap1 -- target:e1 [kind=mgmt];"
-    for tap in $(seq 2 $(($CONFIG_QEMU_NET_TAP_N - 1))); do
+    for tap in $(seq 2 $((CONFIG_QEMU_NET_TAP_N - 1))); do
 	hostports="$hostports | <qtap$tap> qtap$tap "
 	targetports="$targetports | <e$tap> e$tap "
 	edges="$edges host:qtap$tap -- target:e$tap;"
@@ -404,7 +438,8 @@ menuconfig()
    exec kconfig-mconf Config.in
 }

-cd $(dirname $(readlink -f "$0"))
+scriptdir=$(dirname "$(readlink -f "$0")")
+cd "$scriptdir" || (echo "Failed cd to $scriptdir"; exit 1)

 while [ "$1" != "" ]; do
    case $1 in
@@ -414,6 +449,9 @@ while [ "$1" != "" ]; do
 	-h)
 	    usage
 	    ;;
+	-k)
+	    keep=true
+	    ;;
 	*)
 	    break
    esac
@@ -9,46 +9,20 @@
 #   $3 IP adddress

 PATH="$PATH:/usr/bin:/usr/sbin:/bin:/sbin"
-NAME="/etc/frr/static.d/$2-zeroconf.conf"
-NEXT="${NAME}+"

 log()
 {
    logger -I $$ -t zeroconf -p user.notice "$*"
 }

-# Reduce changes needed by comparing with previous route(s)
-act()
-{
-    case $1 in
-	add)
-	    echo "! Generated by avahi-autoipd"  > "$NEXT"
-	    echo "ip route 0.0.0.0/0 $2 254"    >> "$NEXT"
-	    cmp -s "$NAME" "$NEXT" && return
-	    mv "$NEXT" "$NAME"
-	    ;;
-	del)
-	    [ -f "$NAME" ] || return
-	    rm "$NAME"
-	    ;;
-	*)
-	    return
-	    ;;
-    esac
-
-    initctl -nbq restart staticd
-}
-
 case "$1" in
    BIND)
        ip addr flush dev "$2" proto random
        ip addr add "$3"/16 brd 169.254.255.255 scope link dev "$2" proto random
-	act add "$2"
 	log "set ipv4ll $3 on iface $2"
        ;;

    CONFLICT|UNBIND|STOP)
-	act del "$2"
        ip addr flush dev "$2" proto random
 	log "clr ipv4ll on iface $2"
        ;;
@@ -0,0 +1,2 @@
+# --log-level debug
+OSPFD_ARGS="-A 127.0.0.1 -u frr -g frr -f /etc/frr/ospfd.conf --log syslog"
@@ -0,0 +1,2 @@
+# --log-level debug
+ZEBRA_ARGS="-A 127.0.0.1 -u frr -g frr --log syslog "
@@ -3,16 +3,19 @@
 # and similar events feed servers and configuration to dnsmasq.
 domain-needed

-# Only listen to loopback (local system)
-interface=lo
-bind-dynamic
-#listen-address=127.0.0.1,::1
-
+# Allow configuration and cache clear over D-Bus
 enable-dbus

+# Disable the following dnsmasq default DHCP options
+#dhcp-option=option:netmask
+#dhcp-option=28			# option:broadcast
+#dhcp-option=option:domain-name
+dhcp-option=option:router
+dhcp-option=option:dns-server
+dhcp-option=12			# option:hostname
+
 # Generated by openresolv
 resolv-file=/var/lib/misc/resolv.conf

 # Include all files in a directory which end in .conf
 conf-dir=/etc/dnsmasq.d/,*.conf
-
@@ -1,4 +1,7 @@
-service :%i pid:!/run/k8s-logger-%i.pid <usr/container:%i> \
-	[2345] k8s-logger -cni %i -f local1 /run/containers/%i.fifo -- Logger for container %i
-sysv    :%i pid:!/run/container:%i.pid <!pid/k8s-logger:%i> log kill:10 \
-	[2345] container -n %i -- container %i
+# Start a container instance (%i) and redirect logs to /log/container
+# Give podman enough time to properly shut down the container.  Every
+# time we start a container we run the setup stage, disable the Finit
+# timeout to allow the setup stage to run to completion.
+sysv    log:prio:local1,tag:%i kill:10 pid:!/run/container:%i.pid \
+	pre:0,/usr/sbin/container cleanup:0,/usr/sbin/container   \
+	[2345] <!> :%i container -n %i -- container %i
@@ -0,0 +1,9 @@
+# A single mstpd instance can manage multiple bridges, which are
+# dynamically added/removed by the kernel via the /sbin/bridge-stp
+# usermode helper. We use a manual service so that confd can
+# enable/disable it without an initctl barrier, since it needs to
+# already be running when a bridge interface with spanning tree
+# enabled is created.
+
+service env:-/etc/default/mstpd manual:yes \
+	 [S0123456789] mstpd $MSTPD_ARGS -- Spanning Tree daemon
@@ -0,0 +1,4 @@
+# Use <pid/syslogd> as barrier for other system tasks and service that
+# rely on modules, firmware, and device nodes to be ready.
+service if:udevd nowarn env:-/etc/default/sysklogd <run/udevadm:post/success> \
+	[S0123456789] syslogd -F $SYSLOGD_ARGS -- System log daemon
@@ -1 +1 @@
-service [2345] <!> ttyd -i lo -p 8001 login -- Web terminal daemon (ttyd)
+service [2345] <!> ttyd -i lo -W -p 8001 login -- Web terminal daemon (ttyd)
@@ -0,0 +1 @@
+../available/mstpd.conf
@@ -1,3 +0,0 @@
-HostKey /var/lib/ssh/ssh_host_rsa_key
-HostKey /var/lib/ssh/ssh_host_ecdsa_key
-HostKey /var/lib/ssh/ssh_host_ed25519_key
@@ -1,3 +0,0 @@
-net.ipv4.ip_forward=1
-net.ipv4.ip_forward_update_priority=0
-net.ipv6.conf.all.forwarding=1
@@ -1 +1,32 @@
+# Router defaults
+net.ipv4.conf.default.rp_filter=0
+net.ipv4.conf.all.rp_filter=0
+
+net.ipv4.conf.lo.rp_filter=0
+
+net.ipv4.icmp_errors_use_inbound_ifaddr=1
+net.ipv4.conf.all.ignore_routes_with_linkdown=1
+
+# Use neigh information on selection of nexthop for multipath hops
+net.ipv4.fib_multipath_use_neigh=1
+
+# Sane ARP defaults for a switch/router
+net.ipv4.conf.default.arp_announce=2
+net.ipv4.conf.all.arp_announce=2
+
+net.ipv4.conf.default.arp_notify=1
+net.ipv4.conf.all.arp_notify=1
+
+net.ipv4.conf.default.arp_ignore=1
+net.ipv4.conf.all.arp_ignore=1
+
+# IP Routing
+net.ipv4.ip_forward=1
+net.ipv4.ip_forward_update_priority=0
+
 net.ipv4.conf.all.forwarding=0
+net.ipv4.conf.default.forwarding=0
+
+# Multicast group subscriptions
+net.ipv4.igmp_max_memberships=1000
+net.ipv4.neigh.default.mcast_solicit=10
@@ -1,5 +1,23 @@
-net.ipv6.conf.all.forwarding=1
+# Router defaults
+net.ipv6.route.max_size=131072
+net.ipv6.conf.all.ignore_routes_with_linkdown=1
+
+# IP Routing is disabled by default, enabled globally, and per
+# interface, for each interface in confd.  See also accept_ra.
+net.ipv6.conf.all.forwarding=0
 net.ipv6.conf.default.forwarding=0
+
+# Accept router advertisements even when forwarding is enabled
+net.ipv6.conf.all.accept_ra=2
+net.ipv6.conf.default.accept_ra=2
+
+# IPv6 SLAAC
 net.ipv6.conf.all.autoconf=0
 net.ipv6.conf.default.autoconf=0
+
+# Keep permanent addresses on an admin down
+net.ipv6.conf.all.keep_addr_on_down=1
 net.ipv6.conf.default.keep_addr_on_down=1
+
+# Multicast group subscriptions
+net.ipv6.mld_max_msf=512
@@ -0,0 +1,145 @@
+Many of the defaults here are are taken from the Frr recommendations [1].
+Below are relevant excerpts from the kernel documentation.
+
+
+accept_ra, accept Router Advertisements; autoconfigure using them, also
+           determines whether or not to transmit Router Solicitations.
+           If and only if the functional setting is to accept Router
+           Advertisements, Router Solicitations will be transmitted.
+
+  0 - Do not accept Router Advertisements.
+
+  1 - Accept Router Advertisements if forwarding is disabled.
+
+  2 - Overrule forwarding behaviour. Accept Router Advertisements even
+      if forwarding is enabled.
+
+  Default:
+    - enabled if local forwarding is disabled
+    - disabled if local forwarding is enabled
+
+
+accept_ra_pinfo, learn Prefix Information in Router Advertisement.
+
+   Default:
+    - enabled if accept_ra is enabled
+    - disabled if accept_ra is disabled
+
+
+autoconf, autoconfigure IPv6 addresses using Prefix Information in
+          Router Advertisements.
+
+   Default:
+    - enabled if accept_ra_pinfo is enabled
+    - disabled if accept_ra_pinfo is disabled
+
+
+arp_announce, define restriction level for announcing the local source
+              address from IP packets in ARP requests sent on interface:
+
+  0 - (default) Use any local address, configured on any interface
+
+  1 - Try to avoid local addresses that are not in the target’s subnet
+      for this interface.  Useful when target hosts reachable via this
+      interface require the source IP address in ARP requests to be part
+      of their logical network configured on the receiving interface.
+      When we generate the request we will check all our subnets that
+      include the target IP and will preserve the source address if it
+      is from such subnet. If there is no such subnet we select source
+      address according to the rules for level 2.
+
+  2 - Always use the best local address for this target. In this mode we
+      ignore the source address in the IP packet and try to select local
+      address that we prefer for talks with the target host. Such local
+      address is selected by looking for primary IP addresses on all our
+      subnets on the outgoing interface that include the target address.
+      If no suitable local address is found we select the first local
+      address we have on the outgoing interface or on all other
+      interfaces, with the hope we will receive reply for our request
+      and even sometimes no matter the source IP address we announce.
+
+
+arp_notify, define mode for notification of address and device changes.
+
+  0 - (default): do nothing
+  1 - generate gratuitous arp requests when device is brought up or
+      hardware address changes.
+
+
+arp_ignore, define different modes for sending replies in response to
+            received ARP requests that resolve local target addresses:
+
+  0 - (default): reply for any local target IP address, configured on
+      any interface
+
+  1 - reply only if the target IP address is a local address configured
+      on the incoming interface
+
+  2 - reply only if the target IP address is local address configured on
+      the incoming interface and both with the sender’s IP address are part
+      from same subnet on this interface
+
+  3 - do not reply for local addresses configured with scope host, only
+      resolutions for global and link addresses are replied
+
+  4-7 - reserved
+
+  8 - do not reply for all local addresses
+
+
+arp_accept, define behavior for accepting gratuitous ARP (garp) frames
+      from devices that are not already present in the ARP table:
+
+  0 - don’t create new entries in the ARP table
+
+  1 - create new entries in the ARP table
+
+  2 - create new entries only if the source IP address is in the same
+      subnet as an address configured on the interface that received
+      the garp message.
+
+  Both replies and requests type gratuitous arp will trigger the ARP
+  table to be updated, if this setting is on.  If the ARP table already
+  contains the IP address of the gratuitous arp frame, the arp table
+  will be updated regardless if this setting is on or off.
+
+
+icmp_errors_use_inbound_ifaddr
+
+  0 - (default): icmp error messages are sent with the primary address
+      of the exiting interface.
+
+  1 - the message will be sent with the primary address of the interface
+      that received the packet that caused the icmp error. This is the
+      behaviour many network administrators will expect from a router.
+      And it can make debugging complicated network layouts much easier.
+
+  Note, if no primary address exists for the interface selected, then
+  the primary address of the first non-loopback interface that has one
+  will be used regardless of this setting.
+
+
+rp_filter, reverse path source filtering:
+
+  0 - (default): no source validation.
+
+  1 - Strict mode as defined in RFC3704, 'Strict Reverse Path'.  Each
+      incoming packet is tested against the FIB and if the interface is
+      not the best reverse path the packet check will fail.  By default
+      failed packets are discarded.
+
+  2 - Loose mode as defined in RFC3704, 'Loose Reverse Path'.  Each
+      incoming packet’s source address is also tested against the FIB
+      and if the source address is not reachable via any interface the
+      packet check will fail.
+
+  Current recommended practice in RFC3704 is to enable strict mode to
+  prevent IP spoofing from DDos attacks. If using asymmetric routing or
+  other complicated routing, then loose mode is recommended.
+
+  The max value from conf/{all,interface}/rp_filter is used when doing
+  source validation on the {interface}.
+
+
+
+[1]: https://github.com/FRRouting/frr/blob/master/doc/user/Useful_Sysctl_Settings.md
@@ -21,7 +21,11 @@ dir()
 if [ -d "$1" ]; then
    dir "$1"
 else
-    dir "$HOME"
+    if [ "$USER" = "root" ]; then
+	dir "$HOME"
+    else
+	dir "/home/$USER"
+    fi
    dir "/cfg"
    dir "/log"
 fi
@@ -5,9 +5,10 @@
 # -K :: exit immediately when an interrupt character (usually ^C) is typed
 # -R :: Almost raw control charachters, only ANSI color escape sequences and
 #       OSC 8 hyperlink sequences are output.  Allows veritcal scrolling
-# -S :: lines longer than the screen width are chopped (truncated), not wrapped
 # -X :: No termcap initialization and deinitialization set to the terminal.
 #       This is what leaves the contents of the output on screen.

 export LESS="-P %f (press h for help or q to quit)"
-less -RISKd -FX "$@"
+export LANG=en_US.UTF-8
+
+less -RIKd -FX "$@"
@@ -70,12 +70,14 @@ options:
  -p            Show plain output, no bells or whistles

 commands:
+  dhcp          Show DHCP server
  port PORT     Show port configuration and link information
  ports         Show ports available for bridging
  vlans         Show port groups in bridge
  ifaces        Show interfaces and their addresses
  fdb           Show forwarding database (unicast)
  mdb           Show multicast forwarding database
+  stp           Show spanning tree status
  ip   addr     Show IPv4 addresses
       route    Show routing table
  ipv6 addr     Show IPv6 addresses
@@ -87,6 +89,41 @@ commands:
 EOF
 }

+is_dhcp_running()
+{
+    sysrepocfg -X -f json -m infix-dhcp-server | jq -r '
+        ."infix-dhcp-server:dhcp-server".enabled as $global |
+        if ."infix-dhcp-server:dhcp-server".subnet? then
+                (."infix-dhcp-server:dhcp-server".subnet[] |
+                select(.enabled != false)) |
+                if $global != false and . then "true" else "false" end
+        else "false" end
+    ' 2>/dev/null | grep -q true
+}
+
+dhcp()
+{
+    if ! is_dhcp_running; then
+	echo "DHCP server not enabled."
+	exit 0
+    fi
+
+    case $1 in
+	detail)
+	    sysrepocfg -f json -X -d operational -m infix-dhcp-server | \
+		jq -C .
+	    ;;
+	stat*)
+	    sysrepocfg -f json -X -d operational -m infix-dhcp-server | \
+		/usr/libexec/statd/cli-pretty "show-dhcp-server" -s
+	    ;;
+	*)
+	    sysrepocfg -f json -X -d operational -m infix-dhcp-server | \
+		/usr/libexec/statd/cli-pretty "show-dhcp-server"
+	    ;;
+    esac
+}
+
 # Usage 1: show port eth0
 # Usage 2: show port
 # Usage 3: show ports
@@ -188,6 +225,12 @@ rstp()
    mstpctl showport br0
 }

+stp()
+{
+    sysrepocfg -f json -X -d operational -m ietf-interfaces | \
+        /usr/libexec/statd/cli-pretty "show-bridge-stp"
+}
+
 fdb()
 {
    bridge $bopt fdb show
@@ -288,6 +331,9 @@ case $cmd in
    help)
 	usage
 	;;
+    dhcp | dhcp-server)
+	dhcp $*
+	;;
    port*)
 	ports $*
 	;;
@@ -353,6 +399,9 @@ case $cmd in
    span*)
 	rstp
 	;;
+    stp*)
+	stp
+	;;
    sys*)
 	system
 	;;
@@ -0,0 +1,9 @@
+# Extend finit's default udevadm settle synchronization for situations
+# where device are very slow to probe (see #685)
+run nowarn if:udevd cgroup.init <service/udevd/ready> log \
+	[S] /usr/libexec/infix/hw-wait -- Probing hardware
+
+# Now that everything should be probed, do a final pass over the
+# uevent queue before starting syslogd and everything else
+run nowarn if:udevd cgroup.init :post <service/udevd/ready> log \
+	[S] udevadm settle -t 30 --
@@ -0,0 +1,6 @@
+d  /run/containers/args		0700 - -
+d  /run/containers/files	0700 - -
+d  /var/lib/containers		0700 - -
+d  /var/lib/containers/oci	0700 - -
+d  /run/cni			0755 - -
+L+ /var/lib/cni                 -    - - - /run/cni
@@ -0,0 +1,41 @@
+#!/bin/sh
+# (Ab)use the kernel's device link subsystem to detect consumer side
+# devices that may be very slow to probe (looking at you, mv88e6xxx!).
+
+ident=$(basename "$0")
+
+report()
+{
+    if [ -r "/tmp/$ident" ]; then
+	logger -k -p "user.$1" -t "$ident" "Waited for slow devices:"
+	sort "/tmp/$ident" | uniq -c | logger -k -p "user.$1" -t "$ident"
+    fi
+
+    rm -f "/tmp/$ident"
+}
+
+for _ in $(seq 50); do
+    again=
+
+    for dl in /sys/class/devlink/*; do
+    	[ -r "$dl/status" ] || continue
+
+    	status=$(cat "$dl/status")
+	if [ "$status" = "consumer probing" ]; then
+	    basename "$(readlink "$dl/consumer")" >>"/tmp/$ident"
+	    again=yes
+	fi
+
+    done
+
+    if [ -z "$again" ]; then
+	report notice
+	exit 0
+    fi
+
+    sleep .2
+done
+
+logger -k -p user.error -t "$ident" "Timeout waiting for devices to come online"
+report error
+exit 1
@@ -39,8 +39,10 @@ fi
 # init scripts to prevent select services from starting.
 initctl -nbq cond set led

-note "Calling runparts $PRODUCT_INIT/S[0-9]+.* start"
-/usr/libexec/finit/runparts -bsp "$PRODUCT_INIT"
+if [ -d "$PRODUCT_INIT" ]; then
+    note "Calling runparts $PRODUCT_INIT/S[0-9]+.* start"
+    /usr/libexec/finit/runparts -bsp "$PRODUCT_INIT"
+fi

 # Product specific init done.
 initctl -nbq cond set product
@@ -14,24 +14,6 @@ for file in /sys/firmware/qemu_fw_cfg/by_name/opt/mactab/raw /etc/mactab; do
 	fi
 done

-# Sometimes the sysfs is not populated when the switch driver is loaded, with the result
-# that the DSA interface was not found (no /dsa/tagging entry in sysfs. See issue #685.
-#
-# This mitigates that problem by waiting for sysfs to come up if a DSA switch is found
-if [ -n "$(devlink -j dev info | jq -r '.info.[].driver' | grep -q mv88e6085)" ]; then
-	timeout=50
-	while [ -z "$(ls /sys/class/net/*/dsa/tagging)" ]; do
-		timeout=$((timeout-1))
-		if [ $timeout -eq 0 ]; then
-			logger -k -p user.emerg -t "$ident" "Failed to find DSA interface"
-			exit 1
-		fi
-		sleep 0.1
-	done
-
-	logger -k -p user.notice -t "$ident" "Found DSA interface in $timeout seconds"
-fi
-
 # Find CPU interfaces used for connecting to a switch managed by DSA
 for netif in /sys/class/net/*; do
 	iface=$(basename "$netif")
@@ -0,0 +1,8 @@
+#!/bin/sh
+# Initialize speed/duplex of virtio interfaces
+# For virtual test systems (lacp tests)
+
+ifaces=$(ip -d -json link show | jq -r '.[] | select(.parentbus == "virtio") | .ifname')
+for iface in $ifaces; do
+    ethtool -s "$iface" speed 1000 duplex full
+done
@@ -0,0 +1,24 @@
+#!/bin/bash
+# Store and convert RSA PUBLIC/PRIVATE KEYs to be able to use them in
+# OpenSSHd.
+set -e
+
+NAME="$1"
+DIR="$2"
+PUBLIC="$3"
+PRIVATE="$4"
+TMP="$(mktemp)"
+
+echo -e '-----BEGIN RSA PRIVATE KEY-----' > "$DIR/$NAME"
+echo "$PRIVATE" >> "$DIR/$NAME"
+echo -e '-----END RSA PRIVATE KEY-----' >> "$DIR/$NAME"
+
+echo -e "-----BEGIN RSA PUBLIC KEY-----" > "$TMP"
+echo -e "$PUBLIC" >> "$TMP"
+echo -e "-----END RSA PUBLIC KEY-----" >> "$TMP"
+
+ssh-keygen -i -m PKCS8 -f "$TMP" > "$DIR/$NAME.pub"
+chmod 0600 "$DIR/$NAME.pub"
+chmod 0600 "$DIR/$NAME"
+chown sshd:sshd "$DIR/$NAME.pub"
+chown sshd:sshd "$DIR/$NAME"
@@ -1,17 +1,18 @@
-#!/bin/sh
+#!/bin/bash
 # This script can be used to start, stop, create, and delete containers.
-# It is primarily used by confd to create jobs for execd to run from its
-# /run/containers/queue, but it can also be used manually.
+# It is what confd use, with the Finit container@.conf template, to set
+# up, run, and delete containers.
 #
 # NOTE: when creating/deleting containers, remember 'initctl reload' to
-#       activate the changes!  When called by confd, via execd, this is
-#       already handled.
+#       activate the changes!  In confd this is already handled.
 #
 DOWNLOADS=/var/lib/containers/oci
 BUILTIN=/lib/oci
 TMPDIR=/var/tmp
+container=$0
 checksum=""
 extracted=
+timeout=30
 dir=""
 all=""
 env=""
@@ -38,6 +39,11 @@ err()
    [ "$rc" -eq 0 ] || exit "$rc"
 }

+pidfn()
+{
+    echo "/run/containers/${1}.pid"
+}
+
 check()
 {
    file=$1
@@ -109,24 +115,35 @@ EOF
 # If there are more index files, this function does not handle them.
 unpack_archive()
 {
-    image=$1
-    name=$2
+    uri=$1
+    tag=$2
+    img=$(basename "$uri")

    # Supported transports for load and create
-    case "$image" in
+    case "$uri" in
 	oci:*)			# Unpacked OCI image
-	    file=${image#oci:}
+	    file=${uri#oci:}
 	    ;;
 	oci-archive:*)		# Packed OCI image, .tar or .tar.gz format
-	    file=${image#oci-archive:}
+	    file=${uri#oci-archive:}
 	    ;;
 	ftp://* | http://* | https://*)
-            if ! file=$(fetch "$image"); then
+            if ! file=$(fetch "$uri"); then
 		return 1
 	    fi
            ;;
 	*)			# docker://*, docker-archive:*, or URL
-	    echo "$image"
+	    if podman image exists "$img"; then
+		echo "$img"
+		return 0
+	    fi
+	    # XXX: use --retry=0 with Podman 5.0 or later.
+	    if ! id=$(podman pull --quiet "$uri"); then
+		log "Failed pulling $uri"
+		return 1
+	    fi
+	    # Echo image tag to caller
+	    podman images --filter id="$id" --format "{{.Repository}}:{{.Tag}}"
 	    return 0
 	    ;;
    esac
@@ -137,7 +154,7 @@ unpack_archive()
 	elif [ -e "$BUILTIN/$file" ]; then
 	    file="$BUILTIN/$file"
 	else
-	    err 1 "cannot find OCI archive $file in search path."
+	    err 1 "cannot find OCI archive $file in URI $uri"
 	fi
    fi

@@ -161,8 +178,8 @@ unpack_archive()

    dir=$(dirname "$index")
    if echo "$dir" | grep -q ":"; then
-        if [ -z "$name" ]; then
-            name="$dir"
+        if [ -z "$tag" ]; then
+            tag="$dir"
        fi
        sanitized_dir=$(echo "$dir" | cut -d':' -f1)
        mv "$dir" "$sanitized_dir" || err 1 "failed renaming $dir to $sanitized_dir"
@@ -178,21 +195,21 @@ unpack_archive()
 	rm -rf "$dir"
    fi

-    # Rename image from podman default $dir:latest
-    if [ -n "$name" ]; then
-	podman tag "$dir" "$name" >/dev/null
-	podman rmi "$dir"         >/dev/null
+    # Retag image from podman default $dir:latest
+    if [ -n "$tag" ]; then
+	podman tag "$dir" "$tag" >/dev/null
+	podman rmi "$dir"        >/dev/null
    else
-	name=$dir
+	tag=$dir
    fi

-    echo "$name"
+    echo "$tag"
 }

 running()
 {
-    run=$(podman inspect "$1" 2>/dev/null |jq .[].State.Running)
-    [ "$run" = "true" ] && return 0
+    status=$(podman inspect -f '{{.State.Status}}' "$1" 2>/dev/null)
+    [ "$status" = "running" ] && return 0
    return 1
 }

@@ -216,17 +233,14 @@ create()
    fi

    if [ -z "$logging" ]; then
-	logging="--log-driver k8s-file --log-opt path=/run/containers/$name.fifo"
+	logging="--log-driver syslog"
    fi

-    # Pull quietly and don't retry on failure, we use execd for this,
-    # or user retry manually when run interactively, we may have other
-    # containers waiting to start that have an image locally already.
-    # Use --retry=0 with Podman 5.0 or later.
+    # When we get here we've already fetched, or pulled, the image
    args="$args --read-only --replace --quiet --cgroup-parent=containers $caps"
    args="$args --restart=$restart --systemd=false --tz=local $privileged"
    args="$args $vol $mount $hostname $entrypoint $env $port $logging"
-    pidfn=/run/container:${name}.pid
+    pidfile=/run/container:${name}.pid

    [ -n "$quiet" ] || log "---------------------------------------"
    [ -n "$quiet" ] || log "Got name: $name image: $image"
@@ -249,10 +263,11 @@ create()
    fi

    # shellcheck disable=SC2048
-    log "podman create --name $name --conmon-pidfile=$pidfn $args $image $*"
-    if podman create --name "$name" --conmon-pidfile="$pidfn" $args "$image" $*; then
+    log "podman create --name $name --conmon-pidfile=$pidfile $args $image $*"
+    if podman create --name "$name" --conmon-pidfile="$pidfile" $args "$image" $*; then
 	[ -n "$quiet"  ] || log "Successfully created container $name from $image"
 	[ -n "$manual" ] || start "$name"
+
 	# Should already be enabled by confd (this is for manual use)
 	initctl -bnq enable "container@${name}.conf"
 	exit 0
@@ -264,7 +279,6 @@ create()
 delete()
 {
    name=$1
-    image=$2

    if [ -z "$name" ]; then
 	echo "Usage:"
@@ -272,16 +286,26 @@ delete()
 	exit 1
    fi

-    # Should already be disabled (and stopped) by confd (this is for manual use)
-    initctl -bnq disable "container@${name}.conf"
+    # Should already be stopped, but if not ...
+    log "$name: should already be stopped, double checking ..."
+    container stop "$name" >/dev/null

+    while running "$name"; do
+	log "$name: still running, waiting for it to stop ..."
+	_=$((timeout -= 1))
+	if [ $timeout -le 0 ]; then
+	    err 1 "timed out waiting for container $1 to stop before deleting it."
+	fi
+	sleep 1
+    done
+
+    log "$name: calling podman rm -vif ..."
    podman rm -vif "$name" >/dev/null 2>&1
    [ -n "$quiet" ] || log "Container $name has been removed."
 }

 waitfor()
 {
-    timeout=$2
    while [ ! -f "$1" ]; do
 	_=$((timeout -= 1))
 	if [ $timeout -le 0 ]; then
@@ -300,7 +324,7 @@ start()
 	return
    fi

-    initctl -bq cond set "container:$name"
+    initctl start container:$name
    # Real work is done by wrap() courtesy of finit sysv emulation
 }

@@ -313,7 +337,7 @@ stop()
 	return
    fi

-    initctl -bq cond clr "container:$name"
+    initctl stop container:$name
    # Real work is done by wrap() courtesy of finit sysv emulation
 }

@@ -321,8 +345,27 @@ wrap()
 {
    name=$1
    cmd=$2
+    pidfile=$(pidfn "$name")

-    podman "$cmd" "$name"
+    # Containers have three phases: setup, running, and teardown.
+
+    # The setup phase may run forever in the background trying to fetch
+    # the image.  It saves its PID in /run/containers/${name}.pid
+    if [ "$cmd" = "stop" ] && [ -f "$pidfile" ]; then
+        pid=$(cat "$pidfile")
+
+	# Check if setup is still running ...
+	if kill -0 "$pid" 2>/dev/null; then
+            kill "$pid"
+            wait "$pid" 2>/dev/null
+        fi
+
+        rm -f "$pidfile"
+        return 0
+    fi
+
+    # Skip "echo $name" from podman start in log
+    podman "$cmd" "$name" >/dev/null
 }

 # Removes network $1 from all containers
@@ -353,6 +396,19 @@ netrestart()
    done
 }

+cleanup()
+{
+    pidfile=$(pidfn "$name")
+
+    log "Received signal, exiting."
+    if [ -n "$name" ] && [ -f "$pidfile" ]; then
+	log "$name: in setup phase, removing $pidfile ..."
+	rm -f "$pidfile"
+    fi
+
+    exit 1
+}
+
 usage()
 {
 	cat <<EOF
@@ -386,6 +442,7 @@ options:
  -q, --quiet              Quiet operation, called from confd
  -r, --restart POLICY     One of "no", "always", or "on-failure:NUM"
  -s, --simple             Show output in simplified format
+  -t, --timeout SEC        Set timeout for delete/restart commands, default: 20
  -v, --volume NAME:PATH   Create named volume mounted inside container on PATH

 commands:
@@ -403,11 +460,13 @@ commands:
  restart [network] NAME   Restart a (crashed) container or container(s) using network
  run      NAME [CMD]      Run a container interactively, with an optional command
  save     IMAGE FILE      Save a container image to an OCI tarball FILE[.tar.gz]
-  shell                    Start a shell inside a container
+  setup    NAME            Create and set up container as a Finit task
+  shell   [CMD]            Start a shell, or run CMD, inside a container
  show    [image | volume] Show containers, images, or volumes
  stat                     Show continuous stats about containers (Ctrl-C aborts)
  start   [NAME]           Start a container, see -n
  stop    [NAME]           Stop a container, see -n
+  upgrade  NAME            Upgrade a running container (stop, pull, restart)
  volume  [prune]          Prune unused volumes
 EOF
 }
@@ -525,6 +584,10 @@ while [ "$1" != "" ]; do
 	-s | --simple)
 	    simple=true
 	    ;;
+	-t | --timeout)
+	    shift
+	    timeout=$1
+	    ;;
 	-v | --volume)
 	    shift
 	    vol="$vol -v $1"
@@ -541,6 +604,8 @@ if [ -n "$cmd" ]; then
    shift
 fi

+trap cleanup INT HUP TERM
+
 case $cmd in
    # Does not work atm., cannot attach to TTY because
    # we monitor 'podman start -ai foo' with Finit.
@@ -553,19 +618,24 @@ case $cmd in
 	;;
    delete)
 	cmd=$1
-	name=$2
+	[ -n "$name" ] || name=$2
 	if [ "$cmd" = "network" ] && [ -n "$name" ]; then
 	    netwrm "$name"
 	else
-	    delete "$@"
+	    [ -n "$name" ] || name=$1
+	    delete "$name"
 	fi
 	;;
    exec)
-	podman exec -it "$@"
+	if [ -z "$name" ]; then
+	    name="$1"
+	    shift
+	fi
+	podman exec -i "$name" "$@"
 	;;
    flush)
 	echo "Cleaning up any lingering containers";
-	podman rm -av
+	podman rm -av $force
 	;;
    find)
 	cmd=$1
@@ -666,8 +736,38 @@ case $cmd in
 	    gzip "$file"
 	fi
 	;;
+    setup)
+	[ -n "$name" ] || err 1 "setup: missing container name."
+	script=/run/containers/${name}.sh
+	[ -x "$script" ] || err 1 "setup: $script does not exist or is not executable."
+
+	# Save our PID in case we get stuck here and someone wants to
+	# stop us, e.g., due to reconfiguration or reboot.
+	pidfile=$(pidfn "${name}")
+	echo $$ > "$pidfile"
+
+	while ! "$script"; do
+            log "${name}: setup failed, waiting for network changes ..."
+	    read -t 60 _ < <(ip monitor address route)
+
+	    # On IP address/route changes, wait a few seconds more to ensure
+	    # the system has ample time to react and set things up for us.
+	    log "${name}: retrying ..."
+	    sleep 2
+	done
+
+	rm -f "$pidfile"
+	;;
    shell)
-	podman exec -it "$1" sh -l
+	if [ -z "$name" ]; then
+	    name="$1"
+	    shift
+	fi
+	if [ $# -gt 0 ]; then
+	    podman exec -i "$name" sh -c "$*"
+	else
+	    podman exec -it "$name" sh -l
+	fi
 	;;
    show)
 	cmd=$1
@@ -720,7 +820,6 @@ case $cmd in
 	    else
 		name=$1
 		stop "$name"
-		timeout=20
 		while running "$name"; do
 		    _=$((timeout -= 1))
 		    if [ $timeout -le 0 ]; then
@@ -761,15 +860,15 @@ case $cmd in

 	# Likely an OCI archive, or local directory, assume user has updated image.
 	if echo "$img" | grep -Eq '^localhost/'; then
-	    file=$(awk '{s=$NF} END{print s}' "$script")
-	    echo "Upgrading container ${1} with local archive: $file ..."
+	    file=$(awk '/^# meta-image:/ {print $3}' "$script")
+	    echo ">> Upgrading container $1 using $file ..."
 	else
 	    printf ">> Stopping ... "
 	    podman stop "$1"
 	    printf ">> "
 	    podman pull "$img" || (echo "Failed fetching $img, check your network (settings)."; exit 1)
+	    echo ">> Starting $1 ..."
 	fi
-	echo ">> Starting $1 ..."
 	if ! "$script"; then
 	    echo ">> Failed recreating container $1"
 	    exit 1
@@ -781,7 +880,7 @@ case $cmd in
 	[ -n "$cmd" ] && shift
 	case $cmd in
 	    prune)
-		podman volume $force prune
+		podman volume prune $force
 		;;
 	    *)
 		false
@@ -789,6 +888,22 @@ case $cmd in
 	esac
 	;;
    *)
+	if [ -n "$SERVICE_SCRIPT_TYPE" ] && [ -n "$SERVICE_ID" ]; then
+	    case "$SERVICE_SCRIPT_TYPE" in
+		pre)
+		    # Called as pre-script from Finit service
+		    exec $container -q -n "$SERVICE_ID" setup
+		    ;;
+		cleanup)
+		    # Called as cleanup-script from Finit service
+		    log "Calling $container -n $SERVICE_ID delete"
+		    exec $container -q -n "$SERVICE_ID" delete
+		    ;;
+		*)
+		    false
+		    ;;
+	    esac
+	fi
 	usage
 	exit 1
 	;;
@@ -50,7 +50,7 @@ set_dhcp_routes()
 	# format: dest1/mask gw1 ... destn/mask gwn
 	set -- $staticroutes
 	while [ -n "$1" -a -n "$2" ]; do
-	    log "adding route $1 via $2 dev $interface proto dhcp"
+	    log "adding route $1 via $2 metric $metric tag 100"
 	    echo "ip route $1 $2 $metric tag 100" >> "$NEXT"
 	    shift 2
 	done
@@ -115,7 +115,7 @@ case "$ACTION" in
 	    /usr/sbin/avahi-autoipd -c $interface && /usr/sbin/avahi-autoipd -k $interface
 	fi

-	if /bin/ip addr add dev $interface $ip/$subnet $BROADCAST proto 5; then
+	if /bin/ip addr add dev $interface $ip/$subnet $BROADCAST proto dhcp; then
 	    echo "$ip" > "$IP_CACHE"
 	fi
 	if [ -n "$ipv6" ] ; then
@@ -33,6 +33,7 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_SMP=y
 CONFIG_EFI=y
+CONFIG_KPROBES=y
 # CONFIG_GCC_PLUGINS is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -144,7 +145,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_BPFILTER=y
 CONFIG_BRIDGE=y
 CONFIG_BRIDGE_VLAN_FILTERING=y
 CONFIG_BRIDGE_MRP=y
@@ -161,12 +161,14 @@ CONFIG_MPLS=y
 CONFIG_NET_MPLS_GSO=y
 CONFIG_MPLS_ROUTING=m
 CONFIG_MPLS_IPTUNNEL=m
+CONFIG_NET_SWITCHDEV=y
 CONFIG_NET_PKTGEN=y
 # CONFIG_WIRELESS is not set
 CONFIG_NET_9P=y
 CONFIG_NET_9P_VIRTIO=y
 CONFIG_LWTUNNEL=y
 CONFIG_PCI=y
+CONFIG_PCI_MSI=y
 CONFIG_UEVENT_HELPER=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -208,6 +210,7 @@ CONFIG_NET_VRF=y
 CONFIG_E1000=y
 CONFIG_NE2K_PCI=y
 CONFIG_8139CP=y
+CONFIG_ROCKER=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_SERIAL_8250=y
@@ -264,5 +267,5 @@ CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=20
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-# CONFIG_FTRACE is not set
+CONFIG_FUNCTION_TRACER=y
 CONFIG_UNWINDER_FRAME_POINTER=y
@@ -13,8 +13,8 @@ BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
 BR2_INIT_FINIT=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
-# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
 BR2_ROOTFS_MERGED_USR=y
+# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
 BR2_SYSTEM_BIN_SH_BASH=y
 BR2_TARGET_GENERIC_GETTY_PORT="@console"
 BR2_TARGET_GENERIC_GETTY_TERM="xterm"
@@ -27,13 +27,9 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.52"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.21"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="alder/alder styx/dcp-sc-28p-a styx/dcp-sc-28p-b marvell/armada-3720-espressobin marvell/armada-3720-espressobin-emmc marvell/armada-3720-espressobin-v7 marvell/armada-3720-espressobin-v7-emmc marvell/armada-3720-espressobin-ultra marvell/cn9130-crb-A marvell/cn9130-crb-B microchip/sparx5_pcb135_emmc_no_psci"
-BR2_LINUX_KERNEL_CUSTOM_DTS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/dts"
-BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
 BR2_PACKAGE_STRACE=y
@@ -59,8 +55,8 @@ BR2_PACKAGE_PYTHON_GUNICORN=y
 BR2_PACKAGE_LIBSSH_OPENSSL=y
 BR2_PACKAGE_LIBSSH2=y
 BR2_PACKAGE_LIBSSH2_OPENSSL=y
-BR2_PACKAGE_LIBXCRYPT=y
 BR2_PACKAGE_LIBOPENSSL_BIN=y
+BR2_PACKAGE_LIBINPUT=y
 BR2_PACKAGE_LIBCURL_CURL=y
 BR2_PACKAGE_NETOPEER2_CLI=y
 BR2_PACKAGE_NSS_MDNS=y
@@ -80,6 +76,7 @@ BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPTABLES_NFTABLES=y
 BR2_PACKAGE_IPUTILS=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NETCAT_OPENBSD=y
 BR2_PACKAGE_NETSNMP=y
@@ -109,6 +106,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -121,6 +119,7 @@ BR2_PACKAGE_HOST_E2FSPROGS=y
 BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
 BR2_PACKAGE_HOST_GENEXT2FS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_GO_BIN=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS_FIT_SUPPORT=y
@@ -130,11 +129,14 @@ INFIX_DESC="Infix is a Network Operating System based on Linux.  It can be set u
 INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
 INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
+BR2_PACKAGE_ALDER_ALDER=y
+BR2_PACKAGE_MARVELL_CN9130_CRB=y
+BR2_PACKAGE_MARVELL_ESPRESSOBIN=y
+BR2_PACKAGE_STYX_DCP_SC_28P=y
 BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_CURIOS_HTTPD=y
 BR2_PACKAGE_CURIOS_NFTABLES=y
-BR2_PACKAGE_EXECD=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
 BR2_PACKAGE_FACTORY=y
@@ -147,7 +149,6 @@ BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
 BR2_PACKAGE_IITO=y
-BR2_PACKAGE_K8S_LOGGER=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
 BR2_PACKAGE_LANDING=y
@@ -161,10 +162,10 @@ BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
 BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
-BR2_PACKAGE_LIBINPUT=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
-DISK_IMAGE_BOOT_BIN=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
+DISK_IMAGE_BOOT_BIN=y
 GNS3_APPLIANCE_RAM=512
 GNS3_APPLIANCE_IFNUM=10
@@ -27,13 +27,9 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.52"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.21"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="alder/alder styx/dcp-sc-28p-a styx/dcp-sc-28p-b marvell/armada-3720-espressobin marvell/armada-3720-espressobin-emmc marvell/armada-3720-espressobin-v7 marvell/armada-3720-espressobin-v7-emmc marvell/armada-3720-espressobin-ultra marvell/cn9130-crb-A marvell/cn9130-crb-B microchip/sparx5_pcb135_emmc_no_psci"
-BR2_LINUX_KERNEL_CUSTOM_DTS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/dts"
-BR2_LINUX_KERNEL_DTB_KEEP_DIRNAME=y
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
 BR2_PACKAGE_BUSYBOX_CONFIG="${BR2_EXTERNAL_INFIX_PATH}/board/common/busybox_defconfig"
 BR2_PACKAGE_STRACE=y
@@ -75,6 +71,7 @@ BR2_PACKAGE_FRR=y
 BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPUTILS=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NGINX=y
 BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
@@ -92,6 +89,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -113,6 +111,10 @@ INFIX_DESC="Infix is a Network Operating System based on Linux.  It can be set u
 INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
 INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
+BR2_PACKAGE_ALDER_ALDER=y
+BR2_PACKAGE_MARVELL_CN9130_CRB=y
+BR2_PACKAGE_MARVELL_ESPRESSOBIN=y
+BR2_PACKAGE_STYX_DCP_SC_28P=y
 BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_GENCERT=y
@@ -134,6 +136,7 @@ BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
 BR2_PACKAGE_LIBINPUT=y
 BR2_PACKAGE_ROUSETTE=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 DISK_IMAGE_BOOT_BIN=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
@@ -128,6 +128,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -175,7 +176,6 @@ INFIX_HOME="https://github.com/kernelkit/infix/"
 INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
 INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
 BR2_PACKAGE_CONFD=y
-BR2_PACKAGE_EXECD=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
 BR2_PACKAGE_FACTORY=y
@@ -188,7 +188,6 @@ BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
 BR2_PACKAGE_IITO=y
-BR2_PACKAGE_K8S_LOGGER=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
 BR2_PACKAGE_LANDING=y
@@ -203,6 +202,7 @@ BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
 # GNS3_APPLIANCE is not set
@@ -88,6 +88,7 @@ BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPTABLES_NFTABLES=y
 BR2_PACKAGE_IPUTILS=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NETCAT_OPENBSD=y
 BR2_PACKAGE_NETSNMP=y
@@ -117,6 +118,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -165,7 +167,6 @@ INFIX_DOC="https://github.com/kernelkit/infix/tree/main/doc"
 INFIX_SUPPORT="mailto:kernelkit@googlegroups.com"
 BR2_PACKAGE_CONFD=y
 # BR2_PACKAGE_CONFD_TEST_MODE is not set
-BR2_PACKAGE_EXECD=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
 BR2_PACKAGE_FACTORY=y
@@ -178,7 +179,6 @@ BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
 BR2_PACKAGE_IITO=y
-BR2_PACKAGE_K8S_LOGGER=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
 BR2_PACKAGE_LANDING=y
@@ -193,6 +193,7 @@ BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
 # GNS3_APPLIANCE is not set
@@ -12,8 +12,8 @@ BR2_TARGET_GENERIC_ISSUE="Infix by KernelKit"
 BR2_INIT_FINIT=y
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt ${BR2_EXTERNAL_INFIX_PATH}/board/common/xattrs"
-# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
 BR2_ROOTFS_MERGED_USR=y
+# BR2_TARGET_ENABLE_ROOT_LOGIN is not set
 BR2_SYSTEM_BIN_SH_BASH=y
 BR2_TARGET_GENERIC_GETTY_PORT="@console"
 BR2_TARGET_GENERIC_GETTY_TERM="xterm"
@@ -26,7 +26,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INF
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.52"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.21"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -54,10 +54,8 @@ BR2_PACKAGE_PYTHON_GUNICORN=y
 BR2_PACKAGE_LIBSSH_OPENSSL=y
 BR2_PACKAGE_LIBSSH2=y
 BR2_PACKAGE_LIBSSH2_OPENSSL=y
-BR2_PACKAGE_LIBXCRYPT=y
 BR2_PACKAGE_LIBOPENSSL_BIN=y
 BR2_PACKAGE_LIBCURL_CURL=y
-BR2_PACKAGE_LIBMNL=y
 BR2_PACKAGE_NETOPEER2_CLI=y
 BR2_PACKAGE_NSS_MDNS=y
 BR2_PACKAGE_LINUX_PAM=y
@@ -76,6 +74,7 @@ BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPTABLES_NFTABLES=y
 BR2_PACKAGE_IPUTILS=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NETCAT_OPENBSD=y
 BR2_PACKAGE_NETSNMP=y
@@ -105,6 +104,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -124,6 +124,7 @@ BR2_PACKAGE_HOST_E2FSPROGS=y
 BR2_PACKAGE_HOST_ENVIRONMENT_SETUP=y
 BR2_PACKAGE_HOST_GENEXT2FS=y
 BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_GO_BIN=y
 BR2_PACKAGE_HOST_MTOOLS=y
 BR2_PACKAGE_HOST_RAUC=y
 BR2_PACKAGE_HOST_UBOOT_TOOLS=y
@@ -138,7 +139,6 @@ BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_CURIOS_HTTPD=y
 BR2_PACKAGE_CURIOS_NFTABLES=y
-BR2_PACKAGE_EXECD=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
 BR2_PACKAGE_FACTORY=y
@@ -151,7 +151,6 @@ BR2_PACKAGE_FINIT_RTC_FILE="/var/lib/misc/rtc"
 BR2_PACKAGE_FINIT_PLUGIN_TTY=y
 BR2_PACKAGE_FINIT_PLUGIN_URANDOM=y
 BR2_PACKAGE_IITO=y
-BR2_PACKAGE_K8S_LOGGER=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
 BR2_PACKAGE_LANDING=y
@@ -165,6 +164,7 @@ BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
 BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
@@ -26,7 +26,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INF
 BR2_ROOTFS_POST_IMAGE_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-image.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.6.52"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.12.21"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -71,6 +71,7 @@ BR2_PACKAGE_FRR=y
 BR2_PACKAGE_IPROUTE2=y
 BR2_PACKAGE_IPUTILS=y
 BR2_PACKAGE_LLDPD=y
+BR2_PACKAGE_MSTPD=y
 BR2_PACKAGE_NETCALC=y
 BR2_PACKAGE_NGINX=y
 BR2_PACKAGE_NGINX_HTTP_SSL_MODULE=y
@@ -88,6 +89,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
 BR2_PACKAGE_WATCHDOGD=y
@@ -137,6 +139,7 @@ BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
 BR2_PACKAGE_ROUSETTE=y
+BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 TRUSTED_KEYS=y
 TRUSTED_KEYS_DEVELOPMENT=y
 GNS3_APPLIANCE_RAM=512
@@ -4,6 +4,175 @@ Change Log
 All notable changes to the project are documented in this file.


+[v25.03.0][] - 2025-03-31
+-------------------------
+
+> [!IMPORTANT]
+> This release is the first with the new Buildroot 2025.02 (LTS)
+
+### Changes
+ - Upgrade Linux kernel to 6.12.21 (LTS)
+ - Upgrade Buildroot to 2025.02.0 (LTS)
+
+### Fixes
+ - Fix #964: YANG schema warning in syslog: missing 'monitor' node for lag
+ - Fix #980: the system fails to reboot when a container is (stuck), for
+   whatever reason, in its 'setup' state
+ - Fix #990: web console, ttyd service, stopped working after upgrade to
+   Buildroot 2025.02, caused by new (missing) option `--writable`
+ - Fix TCAM memory corruption in `mvpp2` Ethernet controller
+ - Fix annoying (but harmless) usage message from the logger tool when
+   `startup-config` fails to load and the system reverts to failure mode
+ - Fix harmless log warning for product specific init when no product
+   specific init scripts are found
+ - Backport fixes for sysklogd, affecting hostname filtering and periods
+   in TAG names, pending official backport in Buildroot
+
+
+[v25.02.0][] - 2025-03-04
+-------------------------
+
+### Changes
+ - Upgrade Linux kernel to 6.12.18 (LTS)
+ - Upgrade Buildroot to 2024.02.11 (LTS)
+ - Add support for link aggregation (lag), static (balance-xor) and LACP
+ - Add support for the [i.MX 8M Plus EVK][EVK]
+ - YANG type change for SSH private/public keys, from ietf-crypto-types
+   to infix-crypto-types
+ - Disable global IPv6 forwarding by default, enable by per-interface
+   setting.  Note, route advertisements are always accepted.  Issue #785
+ - Drop automatic default route (interface route) for IPv4 autoconf, not
+   necessary and causes more confusion than good.  Issue #923
+ - Update scripting with new RESTCONF examples
+
+### Fixes
+ - Fix #896: `/etc/resolv.conf` not properly generated when system runs
+   in fail secure mode (failing to load `startup-config`)
+ - Fix #902: containers "linger" in the system (state 'exited') after
+   having removed them from the configuration
+ - Fix #930: container configuration changes does not apply at runtime
+   only when saved to `startup-config` and system is rebooted
+ - Fix #936: DHCP server reconfiguration does not always take effect.
+ - Fix #956: CLI `copy` command complains it cannot change owner when
+   copying `factory-config` to `running-config`.  Bogus error, the
+   latter is not really a file
+ - Fix #977: "Operation not permitted" when saving `running-config` to
+   `startup-config` (harmless warning but annoying and concerning)
+
+[EVK]: https://www.nxp.com/design/design-center/development-boards-and-designs/8MPLUSLPD4-EVK
+
+
+[v25.01.0][] - 2025-01-31
+-------------------------
+
+> [!NOTE]
+> This release contains breaking changes in the configuration file
+> syntax for DHCP clients.  Specifically DHCP options *with value*,
+> i.e., the syntax for sending a hexadecimal value now require `hex`
+> prefix before a string of colon-separated pairs of hex values.
+
+### Changes
+
+ - Upgrade Linux kernel to 6.12.11 (LTS)
+ - Upgrade Buildroot to 2024.02.10 (LTS)
+ - Upgrade FRR from 9.1.2 to 9.1.3
+ - Add support for configuring SSH server, issue #441.  As a result,
+   both SSH and NETCONF now use the same host key in `factory-config`
+ - Add operational support for reading DNS resolver info, issue #510
+ - Add operational support for NTP client, issue #510
+ - Add support for more mDNS settings: allow/deny interfaces, acting
+   as "reflector" and filtering of reflected services.  Issue #678
+ - Add DHCPv4 server support, multiple subnets with static hosts and
+   DHCP options on global, subnet, or host level, issue #703.
+   Contributed by [MINEx Networks](https://minexn.com/)
+   - DHCP client options aligned with DHCP server, `startup-config`
+     files with old syntax are automatically migrated
+ - Breaking change in DHCP client options *with value*.  Hexadecimal
+   values must now be formatted as `{ "hex": "c0:ff:ee" }` (JSON)
+ - Add documentation on management via SSH, Web (RESTCONF, Web
+   Console), and Console Port, issue #787
+ - Add documentation of DNS client use and configuration, issue #798
+ - Add support for changing boot order for the system with an RPC,
+   including support for reading boot order from operational datastore
+ - Add support for GRE/GRETAP tunnels
+ - Add support for STP/RSTP on bridges
+ - Add support for VXLAN tunnels
+
+### Fixes
+
+ - Fix #777: Authorized SSH key not applied to `startup-config`
+ - Fix #829: Avahi (mDNS responder) not starting properly on switches
+   with *many* ports (>10).  This led to a review of `sysctl`:
+   - New for IPv4:
+	 - Adjust IGMP max memberships: 20 -> 1000
+	 - Use neighbor information on nexthop selection
+	 - Use inbound interface address on ICMP errors
+	 - Ignore routes with link down
+	 - Disable `rp_filter`
+     - ARP settings have been changed to better fit routers, i.e.,
+       systems with multiple interfaces:
+	   - Always use best local address when sending ARP
+	   - Only reply to ARP if target IP is on the inbound interface
+	   - Generate ARP requests when device is brought up or HW address changes
+   - New for IPv6:
+	 - Keep static global addresses on link down
+	 - Ignore routes with link down
+ - Fix #861: Fix error when running 251+ reconfigurations in test-mode
+ - Fix #869: Setup of bridges is now more robust
+ - Fix #899: DHCP client with client-id does not work
+ - Minor cleanup of Networking Guide
+ - Fix memory leaks in `confd`
+
+
+[v24.11.1][] - 2024-11-29
+-------------------------
+
+### Changes
+
+ - Upgrade Frr to 9.1.2, fixes an OSPF issue where *Zebra* lost netlink
+   messages and drifted out of sync with the kernel's view of addresses
+   and interfaces available in the system
+ - Allow setting IP address directly on VLAN filtering bridges.  This
+   only works when the bridge is an untagged member of a (single) VLAN.
+ - cli: usability -- showing log files now automatically jump to the end
+   of the file, where the latest events are
+ - cli: usability -- showing container status, or other status that
+   overflows the terminal horizontally, now wrap the lines and exit the
+   pager immediately if the contents fit on the first screen
+ - The default log level of the mDNS responder, `avahi-daemon`, has been
+   adjusted to make it less verbose.  Now only `LOG_NOTICE` and higher
+   severity is logged -- making it very quiet
+
+### Fixes
+
+ - Fix #685: DSA conduit interface not always detected.  Previous
+   attempt at a fix (v24.10.2) mitigated the issue, but did not
+   completely solve it.
+ - Fix #835: redesign how the system creates/deletes containers from the
+   `running-config`.  Prior to this change, all removal and creation was
+   handled by a separate queue that ran asynchronously from the `confd`
+   process.  This could lead to situations where new configurations are
+   applied before the queue had been fully processed.  After this change
+   containers are deleted synchronously and new containers are created
+   in the same flow as during normal runtime operation (start/upgrade)
+ - Fix start of containers with `manual=True` option should now work
+   again, regression in v24.11.0
+ - Fix loss of writable volumes when temporarily disabling a container
+   in the configuration, now the container remains dormant with all its
+   volumes still available
+ - Fix presentation bug in CLI `show interfaces` where all line-drawing
+   characters showed up as hexadecimal values.  Regression in v24.11.0
+ - Fix missing log messages from Frr Zebra daemon
+ - Stop the zeroconf (IPv4LL) agent, `avahi-autoipd`, when removing an
+   interface, e.g., `br0`
+ - Creating more than one container trigger restarts of previously set
+   up containers.  Which in some cases may cause these earlier ones to
+   end up in an inconsistent state
+ - Prevent traffic assigned to locally terminated VLANs from being
+   forwarded, when the underlying ports are simultaneously attached to
+   a VLAN filtering bridge.
+
+
 [v24.11.0][] - 2024-11-20
 -------------------------

@@ -172,7 +341,7 @@ renamed to ease maintenance, more info below.
  with `custom-phys-address` to allow for constructing more free-form
  MAC addresses based on the chassis MAC (a.k.a., base MAC) address.
  For more information, see the YANG model, a few examples are listed in
-  the updated documentation.  
+  the updated documentation.
  The syntax will be automatically updated in the `startup-config` and
  `factory-config` -- make sure to verify the changes and update any
  static `factory-config` used for your products
@@ -1360,7 +1529,11 @@ Supported YANG models in addition to those used by sysrepo and netopeer:
 - N/A

 [buildroot]:  https://buildroot.org/
-[UNRELEASED]: https://github.com/kernelkit/infix/compare/v24.11.0...HEAD
+[UNRELEASED]: https://github.com/kernelkit/infix/compare/v25.03.0...HEAD
+[v25.03.0]:   https://github.com/kernelkit/infix/compare/v25.02.0...v25.03.0
+[v25.02.0]:   https://github.com/kernelkit/infix/compare/v25.01.0...v25.02.0
+[v25.01.0]:   https://github.com/kernelkit/infix/compare/v24.11.0...v25.01.0
+[v24.11.1]:   https://github.com/kernelkit/infix/compare/v24.11.0...v24.11.1
 [v24.11.0]:   https://github.com/kernelkit/infix/compare/v24.10.0...v24.11.0
 [v24.10.2]:   https://github.com/kernelkit/infix/compare/v24.10.1...v24.10.2
 [v24.10.1]:   https://github.com/kernelkit/infix/compare/v24.10.0...v24.10.1
@@ -1,13 +1,16 @@
+<img align="right" src="logo.png" alt="Infix - Linux <3 NETCONF" width=480 border=10>

 Welcome to Infix, your friendly Network Operating System!  On these
 pages you can find both user and developer documentation.

-> Topics on configuring the system include CLI examples, every setting
-> is also possible to perform using NETCONF.  In fact, the Infix test
-> system solely relies on NETCONF for configuring network topologies.
+Most topics on configuring the system include CLI examples, but every
+setting, as well as status read-back from the operational datastore, is
+also possible to perform using NETCONF or RESTCONF.  In fact, the Infix
+regression test system solely relies on NETCONF and RESTCONF.

-The CLI documentation is also available from inside the CLI itself using
-the `help` command.
+> [!TIP]
+> The CLI documentation is also available from inside the CLI itself
+> using the `help` command in admin-exec mode.

 - **CLI Topics**
   - [Introduction to the CLI](cli/introduction.md)
@@ -18,6 +21,7 @@ the `help` command.
   - [Introduction](introduction.md)
   - [System Configuration](system.md)
   - [Network Configuration](networking.md)
+   - [DHCP Server](dhcp.md)
   - [Syslog Support](syslog.md)
 - **Infix In-Depth**
   - [Boot Procedure](boot.md)
@@ -60,14 +60,14 @@ rootfs overlay -- with a [VPD](vpd.md) you can even support several!
 ### Variables & Format Specifiers

 Parts of the configuration you likely always want to generated, like the
-SSH hostkey used by NETCONF, a unique hostname, or the `admin` user's
+SSH hostkey used by SSH server and NETCONF, a unique hostname, or the `admin` user's
 unique (per-device with a VPD) password hash.  This section lists the
 available keywords, see the next section for examples of how to use
 them:

 - **Default password hash:** `$factory$` (from VPD, .dtb, or built-in)  
   XPath: `/ietf-system:system/authentication/user/password`
- - **Default NETCONF hostkey:** `genkey` (regenerated at factory reset)  
+ - **Default SSH and NETCONF hostkey:** `genkey` (regenerated at factory reset)
   XPath: `/ietf-keystore:keystore/asymmetric-keys/asymmetric-key[name='genkey']`
 - **Hostname format specifiers:**  
   XPath: `/ietf-system:system/hostname`
@@ -221,8 +221,8 @@ $ echo "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCAtLSBhIE5ldHdvcmsgT3BlcmF0aW5nIFN5c3Rl

 **IETF Keystore**

-Notice how both the public and private keys are left empty here.  The
-`genkey` is always automatically regenerated after each factory reset.
+Notice how both the public and private keys are left empty here, this
+cause them to be always automatically regenerated after each factory reset.
 Keeping the `factory-config` snippet like this means we can use the same
 file on multiple devices, without risking them sharing the same host
 keys.  Sometimes you may want the same host keys, but that is the easy
@@ -245,8 +245,6 @@ use-case and not documented here.
  },
 ```

-The `genkey` is currently only used by the NETCONF SSH backend.
-
 **IETF NETCONF Server**

 ```json
@@ -280,6 +278,28 @@ The `genkey` is currently only used by the NETCONF SSH backend.
  },
 ```

+**Infix Services**
+```json
+  "infix-services:ssh": {
+    "enabled": true,
+    "hostkey": [
+      "genkey"
+    ],
+    "listen": [
+      {
+        "name": "ipv4",
+        "address": "0.0.0.0",
+        "port": 22
+      },
+      {
+        "name": "ipv6",
+        "address": "::1",
+        "port": 22
+      }
+    ]
+  }
+```
+


 Integration
@@ -370,22 +390,30 @@ But you can of course use only two numbers, *major.minor*, as well.
 > with your own versioning scheme.


-### `INFIX_RELEASE`
+### Specifying Versioning Information

-This global variable **must be** a lower-case string (no spaces or
-other characters outside of 0–9, a–z, '.', '_' and '-') identifying
-the operating system version, excluding any OS name information or
-release code name, and suitable for processing by scripts or usage
-in generated filenames.
+Two optional environment variables control the version information
+recorded in images. Both of these **must be** a lower-case string (no
+spaces or other characters outside of 0–9, a–z, '.', '_' and '-')
+identifying the operating system version, excluding any OS name
+information or release code name, and suitable for processing by
+scripts or usage in generated filenames.
+
+#### `INFIX_BUILD_ID`
+
+Used for `BUILD_ID` in `/etc/os-release`.
+
+**Default:** `$(git describe --always --dirty --tags)`, from the _top
+directory_. By default, the top directory refers to the root of the
+Infix source tree, but this can be changed by setting the branding
+variable `INFIX_OEM_PATH`, e.g. in a `defconfig` file or via `make
+menuconfig`, to the path of an enclosing br2-external.
+
+#### `INFIX_RELEASE`

 Used for `VERSION` and `VERSION_ID` in `/etc/os-release` and
 generated file names like disk images, etc.

-**Default:** generated using `git describe --always --dirty --tags`,
-with an additional `-C $infix_path`.  This variable defaults to the
-Infix tree and can be changed by setting the menuconfig branding
-variable `INFIX_OEM_PATH` to that of the br2-external.  It is also
-possible to set the `GIT_VERSION` variable in your `post-build.sh`
-script to change how the VCS version is extracted.
+**Default:** `${INFIX_BUILD_ID}`

 [NanoPi R2S]: https://github.com/kernelkit/infix/blob/main/board/aarch64/r2s/rootfs/etc/factory-config.cfg
@@ -31,9 +31,9 @@ Infix comes with native support for Docker containers using [podman][].
 The [YANG model][1] describes the current level of support, complete
 enough to run both system and application containers.

-Key design features, like using Linux switchdev, allow users to assign
-switch ports directly to containers, not just bridged VETH pairs, this
-is a rare and in many cases *unique* feature of Infix.
+Key design features of Infix, like using Linux switchdev, allow users to
+assign switch ports directly to containers, not just bridged VETH pairs.
+This is a rare and in many cases *unique* feature of Infix.

 All network specific settings are done using the IETF interfaces YANG
 model, with augments for containers to ensure smooth integration with
@@ -43,7 +43,7 @@ container networking in podman.
 > Even though the `podman` command can be used directly from a shell
 > prompt, we strongly recommend using the CLI commands instead.  They
 > employ the services of a wrapper `container` script which handles the
-> integration of containers in the system.
+> integration of Docker containers in the system.


 Caution
@@ -83,18 +83,20 @@ In the CLI, containers can be run in one of two ways:
 1. `container run IMAGE [COMMAND]`, or
 2. enter `configure` context, then `edit container NAME`

-The former is useful mostly for testing, or running single commands in
-an image.  It is a wrapper for `podman run -it --rm ...`, while the
-latter is a wrapper and adaptation of `podman create ...`.
+The first is useful mostly for testing, or running single commands in
+an image.  It is a wrapper for `podman run -it --rm ...`.

-The second creates a read-only container that is automatically started
-at every boot.  When non-volatile storage is needed, data stored in a
-volume is persisted until explicitly removed from the configuration,
-i.e., across host and container reboots and upgrades.
+The second creates a read-only container that by default automatically
+start at every boot.   It basically wraps `podman create ...`.

-Another option is [Content Mounts](#content-mounts), where the content
-of a file mounted into the container is kept along with the container
-configuration in the device's `startup-config`.
+When non-volatile storage is needed two complementary options exist:
+
+ - **Volumes:** data stored in a volume is persisted until explicitly
+   removed from the configuration, i.e., across host reboots and
+   container upgrades
+ - **[Content Mounts](#content-mounts):** where the content of a file
+  mounted into the container is kept along with the container
+  configuration in the device's `startup-config`

 Podman ensures (using tmpfs) all containers have writable directories
 for certain critical file system paths: `/dev`, `/dev/shm`, `/run`,
@@ -127,24 +129,30 @@ Classic Hello World:
    Hello from Docker!
    This message shows that your installation appears to be working correctly.

-Persistent web server using nginx, sharing the host's network:
+A web server with [nginx][], using standard docker bridge.  Podman will
+automatically create a VETH pair for us, connecting the container to the
+`docker0` bridge:

    admin@example:/> configure
-    admin@example:/config> edit container web
-    admin@example:/config/container/web> set image docker://nginx:alpine
-    admin@example:/config/container/web> set publish 80:80
-    admin@example:/config/container/web> set network host
-    admin@example:/config/container/web> leave
+    admin@example:/config/> edit interface docker0
+    admin@example:/config/interface/docker0/> set container-network
+    admin@example:/config/interface/docker0/> end
+    admin@example:/config/> edit container web
+    admin@example:/config/container/web/> set image docker://nginx:alpine
+    admin@example:/config/container/web/> set network publish 8080:80
+    admin@example:/config/container/web/> set network interface docker0
+    admin@example:/config/container/web/> set volume cache target /var/cache
+    admin@example:/config/container/web/> leave
    admin@example:/> show container

 Exit to the shell and verify the service with curl, or try to attach
 to your device's IP address using your browser:

-    admin@example:~$ curl http://localhost
+    admin@example:~$ curl http://localhost:8080

-or connect to port 80 of your running Infix system with a browser.  See
-the following sections for how to add more interfaces and manage your
-container at runtime.
+or connect to port 8080 of your running Infix system with a browser.
+See the following sections for how to add more interfaces and manage
+your container at runtime.


 Container Images
@@ -456,11 +464,11 @@ in a `bridge`.  Below an example of a system container calls `set
 network interface docker0`, here we show how to set options for that
 network:

-    admin@example:/config/container/ntpd/> edit network docker0 
-    admin@example:/config/container/ntpd/network/docker0/> 
-    admin@example:/config/container/ntpd/network/docker0/> set option 
+    admin@example:/config/container/ntpd/> edit network interface docker0
+    admin@example:/config/container/ntpd/network/interface/docker0/>
+    admin@example:/config/container/ntpd/network/interface/docker0/> set option
    <string>  Options for masquerading container bridges.
-    admin@example:/config/container/ntpd/network/docker0/> help option 
+    admin@example:/config/container/ntpd/network/interface/docker0/> help option
    NAME
            option <string>
    
@@ -471,9 +479,9 @@ network:
                     mac=00:01:02:c0:ff:ee -- set fixed MAC address in container
                     interface_name=foo0   -- set interface name inside container
    
-    admin@example:/config/container/ntpd/network/docker0/> set option ip=172.17.0.2
-    admin@example:/config/container/ntpd/network/docker0/> set option interface_name=wan
-    admin@example:/config/container/ntpd/network/docker0/> leave
+    admin@example:/config/container/ntpd/network/interface/docker0/> set option ip=172.17.0.2
+    admin@example:/config/container/ntpd/network/interface/docker0/> set option interface_name=wan
+    admin@example:/config/container/ntpd/network/interface/docker0/> leave


 ### Container Host Interface
@@ -903,4 +911,5 @@ Container Image](#upgrading-a-container-image) (above).
 [14]:     https://github.com/kernelkit/curiOS/
 [15]:     https://github.com/kernelkit/curiOS/blob/2e4748f65e356b2c117f586cd9420d7ba66f79d5/board/system/rootfs/etc/inittab
 [tini]:   https://github.com/krallin/tini
+[nginx]:  https://hub.docker.com/_/nginx
 [podman]: https://podman.io
@@ -164,6 +164,59 @@ Now you can rebuild `confd`, just as described above, and restart Infix:
    make confd-rebuild all run


+### `statd`
+
+The Infix status daemon, `src/statd`, is responsible for populating the 
+sysrepo `operational` datastore. Like `confd`, it uses XPath subscriptions, 
+but unlike `confd`, it relies entirely on `yanger`, a Python script that 
+gathers data from local linux services and feeds it into sysrepo.
+
+To apply changes, rebuild the image:
+
+    make python-statd-rebuild statd-rebuild all
+
+Rebuilding the image and testing on target for every change during 
+development process can be tedious. Instead, `yanger` allows remote 
+execution, running the script directly on the host system (test 
+container):
+
+    infamy0:test # ../src/statd/python/yanger/yanger -x "../utils/ixll -A ssh d3a" ieee802-dot1ab-lldp
+
+`ixll` is a utility script that lets you run network commands using an
+**interface name** instead of a hostname. It makes operations like 
+`ssh`, `scp`, and network discovery easier.
+
+Normally, `yanger` runs commands **locally** to retrieve data 
+(e.g., `lldpcli` when handling `ieee802-dot1ab-lldp`). However, when 
+executed with `-x "../utils/ixll -A ssh d3a"` it redirects these 
+commands to a remote system connected to the local `d3a` interface via 
+SSH. This setup is used for running `yanger` in an 
+[interactive test environment](testing.md#interactive-usage). The yanger
+script runs on the `host` system, but key commands are executed on the 
+`target` system.
+
+For debugging or testing, you can capture system command output and 
+replay it later without needing a live system.
+
+To capture:
+
+    infamy0:test # ../src/statd/python/yanger/yanger -c /tmp/capture ieee802-dot1ab-lldp
+
+To replay:
+
+    infamy0:test # ../src/statd/python/yanger/yanger -r /tmp/capture ieee802-dot1ab-lldp
+
+This is especially useful when working in isolated environments or debugging
+issues without direct access to the DUT.
+
+### Agree on YANG Model
+
+When making changes to the `confd` and `statd` services, you will often need to update
+the YANG models. If you are adding a new YANG module, it's best to follow the 
+structure of an existing one. However, before making any changes, **always discuss
+them with the Infix core team**. This helps avoid issues later in development and 
+makes pull request reviews smoother.
+
 Testing
 -------

@@ -175,6 +228,11 @@ The Infix automated test suite is built around Qemu and [Qeneth][2], see:
 * [Testing](testing.md)
 * [Docker Image](../test/docker/README.md)

+With any new feature added to Infix, it is essential to include a 
+relevant test case. See the 
+[Test Development](testing.md#test-development) section for guidance
+on adding test cases.
+

 Reviewing
 ---------
@@ -0,0 +1,171 @@
+DHCP Server
+===========
+
+The DHCPv4 server provides automatic IP address assignment and network
+configuration for clients.  It supports address pools, static host
+assignments, and customizable DHCP options.  It also serves as a DNS
+proxy for local subnets and can even forward queries to upstream DNS
+servers[^1].
+
+> [!NOTE]
+> When using the CLI, the system automatically enables essential options
+> like DNS servers and default gateway based on the system's network
+> configuration.  These options can be disabled, changed or overridden,
+> at any level: global, subnet, or per-host.
+
+
+## Basic Configuration
+
+The following example configures a DHCP server for subnet 192.168.2.0/24
+with an address pool:
+
+```
+admin@example:/> configure
+admin@example:/config/> edit dhcp-server
+admin@example:/config/dhcp-server/> edit subnet 192.168.2.0/24
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> set pool start-address 192.168.2.100 end-address 192.168.2.200
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> leave
+```
+
+When setting up the server from the CLI, the system automatically adds a
+few default DHCP options that will be sent to clients: both DNS server
+and default gateway will use the system address on the matching
+interface.
+
+```
+admin@example:/> show running-config
+  "infix-dhcp-server:dhcp-server": {
+    "subnet": [
+      {
+        "subnet": "192.168.2.0/24",
+        "option": [
+          {
+            "id": "dns-server",
+            "address": "auto"
+          },
+          {
+            "id": "router",
+            "address": "auto"
+          }
+        ],
+        "pool": {
+          "start-address": "192.168.2.100",
+          "end-address": "192.168.2.200"
+        }
+      }
+    ]
+  }
+```
+
+> [!IMPORTANT]
+> Remember to set up an interface in this subnet, avoid using addresses
+> in the DHCP pool, or reserved for static hosts.  In Class C networks
+> the router usually has address `.1`.  Depending on the use-case, you
+> may also want to set up routing.
+
+
+## Static Host Assignment
+
+To reserve specific IP addresses for clients based on their MAC address,
+hostname, or client ID:
+
+```
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> edit host 192.168.2.10
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/host/192.168.2.10/> set match mac-address 00:11:22:33:44:55
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/host/192.168.2.10/> set hostname printer
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/host/192.168.2.10/> leave
+```
+
+Match hosts using a client identifier instead of MAC address:
+
+```
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/> edit host 192.168.1.50
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/host/192.168.1.50/> edit match
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/host/192.168.1.50/match/> set client-id hex c0:ff:ee
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/host/192.168.1.50/match/> leave
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/host/192.168.1.50/> set lease-time infinite
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/host/192.168.1.50/> leave
+```
+
+The `hex` prefix here ensures matching of client ID is done using the
+hexadecimal octets `c0:ff:ee`, three bytes.  Without the prefix the
+ASCII string "c0:ff:ee", eight bytes, is used.
+
+> [!NOTE]
+> The DHCP server is fully RFC conformant, in the case of option 61 this
+> means that using the `hex` prefix will require the client to set the
+> `htype` field of the option to `00`.  See RFC 2132 for details.
+
+
+## Custom DHCP Options
+
+Configure additional DHCP options globally, per subnet, or per host:
+
+```
+admin@example:/config/dhcp-server/> edit subnet 192.168.2.0/24
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> edit option dns-server
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/option/dns-server/> set address 8.8.8.8
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/option/dns-server/> leave
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> edit option ntp-server
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/option/ntp-server/> set address 192.168.2.1
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/option/ntp-server/> leave
+```
+
+When configuring, e.g., `dns-server`, or `router` options with the value
+`auto`, the system uses the IP address from the interface matching the
+subnet.  For example:
+
+```
+admin@example:/> show interfaces brief
+Interface    Status  Address
+eth0         UP      192.168.1.1/24
+eth1         UP      192.168.2.1/24
+
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/> edit option dns-server
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/option/dns-server/> set address auto
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/option/dns-server/> leave
+```
+
+In this case, clients in subnet 192.168.1.0/24 will receive 192.168.1.1
+as their DNS server address.
+
+
+## Multiple Subnets
+
+Configure DHCP for multiple networks:
+
+```
+admin@example:/> configure
+admin@example:/config/> edit dhcp-server
+admin@example:/config/dhcp-server/> edit subnet 192.168.1.0/24
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/> set pool start-address 192.168.1.100 end-address 192.168.1.200
+admin@example:/config/dhcp-server/subnet/192.168.1.0/24/> leave
+admin@example:/config/dhcp-server/> edit subnet 192.168.2.0/24
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> set pool start-address 192.168.2.100 end-address 192.168.2.200
+admin@example:/config/dhcp-server/subnet/192.168.2.0/24/> leave
+```
+
+
+## Monitoring
+
+View active leases and server statistics:
+
+```
+admin@example:/> show dhcp-server
+IP ADDRESS       MAC                HOSTNAME            CLIENT ID             EXPIRES
+192.168.2.22     00:a0:85:00:02:05                      00:c0:ff:ee           3591s
+192.168.1.11     00:a0:85:00:04:06  foo                 01:00:a0:85:00:04:06  3591s
+
+admin@example:/> show dhcp-server statistics
+DHCP offers sent                : 6
+DHCP ACK messages sent          : 5
+DHCP NAK messages sent          : 0
+DHCP decline messages received  : 0
+DHCP discover messages received : 6
+DHCP request messages received  : 5
+DHCP release messages received  : 6
+DHCP inform messages received   : 6
+```
+
+
+[^1]: This requires the system DNS resolver to be configured.
@@ -1,21 +1,21 @@
-Discover Infix Units
-====================
+# Discover Devices
+
+Infix advertises itself via the [mDNS-SD](#mdns-sd) and [LLDP](#lldp)
+discovery protocols.  mDNS-SD has good client support in Windows, macOS
+and on Linux systems.  More on these protocols later.
+
+An even simpler method is available when directly attached to an Infix
+device:

 ```
- .----.      Ethernet       .-------.
- | PC +---------------------+ Infix |
- '----' if1            eth0 '-------'
+       .----.      Ethernet       .-------.
+       | PC +---------------------+ Infix |
+       '----' if1              e1 '-------'
 ```
-Figure 1: PC directly connected over Ethernet to Infix unit (here eth0).

-
-When you wish to discover the IP address of an Infix switch, the simplest
-way is probably to *ping the IPv6 all-hosts* address (ff02::1) over a
-directly connected Ethernet cable. The unit's link-local IPv6 address is
-seen in the response.
-
-In the example below, the PC is connected to Infix via interface *tap0*
-(*tap0* is *if1* in Figure 1) and Infix responds with address
+With IPv6 you can *ping the all-hosts* address (ff02::1), the device's
+link-local IPv6 address is then seen in the response.  In the following
+example, the PC here uses *tap0* as *if1*, Infix responds with address
 *fe80::ff:fec0:ffed*.

 ```
@@ -31,7 +31,11 @@ rtt min/avg/max/mdev = 0.389/0.455/0.558/0.073 ms
 linux-pc:# 
 ```

-The PC could connect then connect to Infix, e.g., using SSH.
+> [!TIP]
+> The `-L` option ignores local responses from the PC.
+
+This address can then be used to connect to the device, e.g., using SSH.
+Notice the syntax `username@address%interface`:

 ```
 linux-pc:# ssh admin@fe80::ff:fec0:ffed%tap0
@@ -39,17 +43,13 @@ admin@fe80::ff:fec0:ffed%tap0's password: admin
 admin@infix-c0-ff-ee:~$ 
 ```

-## Discovery mechanisms available in Infix

-Infix advertises its presence via the [mDNS](#mdns) and [LLDP](#lldp)
-discovery protocols.
+## LLDP

+Infix supports LLDP (IEEE 802.1AB).  For a device with factory default
+settings, the link-local IPv6 address can be read from the Management
+Address TLV using *tcpdump* or other sniffing tools[^1]:

-### LLDP
-
-Infix supports LLDP (IEEE 802.1AB). For a unit with factory default
-settings, the PC can readout the link-local IPv6 address from the
-Management Address TLV using *tcpdump* or other sniffing tools[^1].
 ```
 linux-pc:# tcpdump -i tap0 -Qin -v ether proto 0x88cc
 tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
@@ -83,11 +83,12 @@ tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144
 linux-pc:# 
 ```

-If the unit has an IPv4 address assigned, it is shown in an additional
+If the device has an IPv4 address assigned, it is shown in an additional
 Management Address TLV.

-> **Note** The Management Addresses shown by LLDP are not
-> necessarily associated with the port transmitting the LLDP message. 
+> [!NOTE]
+> The Management Addresses shown by LLDP are not necessarily associated
+> with the port transmitting the LLDP message.

 In the example below, the IPv4 address (10.0.1.1) happens to be
 assigned to *eth0*, while the IPv6 address (2001:db8::1) is not.
@@ -130,10 +131,6 @@ tcpdump: listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144
 linux-pc:#
 ```

-[^1]: [lldpd: implementation of IEEE 802.1ab
-    (LLDP)](https://github.com/lldp/lldpd) includes *lldpcli*, which
-    is handy to sniff and display LLDP packets.
-
 The LLDP service can be disabled using the following commands.

 ```
@@ -143,13 +140,38 @@ admin@infix-c0-ff-ee:/config/> leave
 admin@infix-c0-ff-ee:/> 
 ```

-### mDNS

-DNS-SD/mDNS can be used to discover Infix units and services. Infix
-units present their IP addresses, services and hostname within the
-.local domain. This method has good client support in Apple and Linux
-systems. On Linux, tools such as *avahi-browse* or *mdns-scan*[^2] can
-be used to search for devices advertising their services via mDNS.
+## mDNS-SD
+
+DNS-SD/mDNS-SD can be used to discover Infix devices and services.  By
+default, Infix use the `.local` domain for advertising services.  Some
+networks use `.lan` instead, so this configurable:
+
+```
+admin@infix-c0-ff-ee:/> configure
+admin@infix-c0-ff-ee:/config/> edit mdns
+admin@infix-c0-ff-ee:/config/mdns/> set domain lan
+```
+
+Other available settings include limiting the interfaces mDNS responder
+acts on:
+
+```
+admin@infix-c0-ff-ee:/config/> set interfaces allow e1
+```
+
+or
+
+```
+admin@infix-c0-ff-ee:/config/> set interfaces deny wan
+```
+
+The `allow` and `deny` settings are complementary, `deny` always wins.
+
+----
+
+In Linux, tools such as *avahi-browse* or *mdns-scan*[^2] can be used to
+search for devices advertising their services via mDNS.

 ```
 linux-pc:# avahi-browse -ar
@@ -181,9 +203,15 @@ linux-pc:# avahi-browse -ar
 linux-pc:#
 ```

+> [!TIP]
+> The `-t` option is also very useful, it stops browsing automatically
+> when a "more or less complete list" has been printed.  However, some
+> devices on the LAN may be in deep sleep so run the command again if
+> you cannot find the device you are looking for.
+
 Additionally, *avahi-resolve-host-name* can be used to verify domain
-name mappings for IP addresses. By default, it translates from IPv4
-addresses. This function allows users to confirm that addresses are
+name mappings for IP addresses.  By default, it translates from IPv4
+addresses.  This function allows users to confirm that addresses are
 mapped correctly.

 ```
@@ -219,20 +247,21 @@ linux-pc:#
 ```

 To disable mDNS/mDNS-SD, type the commands:
+
 ```
 admin@infix-c0-ff-ee:/> configure 
 admin@infix-c0-ff-ee:/config/> no mdns
 admin@infix-c0-ff-ee:/config/> leave
 ```

-#### Human-Friendly Hostname Alias
+### Human-Friendly Hostname Alias

-Each Infix unit will advertise itself as *infix.local*, in addition to
-its full hostname (e.g., *infix-c0-ff-ee.local* or *foo.local*).  This
-alias works seamlessly on a network with a single Infix device, and
-makes it easy to connect when the exact hostname is not known in
-advance. The examples below show how the alias can be used for
-actions such as pinging or establishing an SSH connection:
+Each Infix deviuce advertise itself as *infix.local*, in addition to its
+full hostname (e.g., *infix-c0-ff-ee.local* or *foo.local*).  This alias
+works seamlessly on a network with a single Infix device, and makes it
+easy to connect when the exact hostname is not known in advance.  The
+examples below show how the alias can be used for actions such as
+pinging or establishing an SSH connection:

 ```
 linux-pc:# ping infix.local -c 3
@@ -254,30 +283,33 @@ linux-pc:# ssh admin@infix.local

 Run the command 'cli' for interactive OAM

-linux-pc:#
+admin@infix-c0-ff-ee:~$
 ```

 When multiple Infix devices are present on the LAN the alias will not
 uniquely identify a device; *infix.local* will refer to any of the
 Infix devices, likely the one that first appeared.

-> When multiple Infix units are present, use the full hostname (e.g.,
-> *infix-c0-ff-ee.local* or *foo.local*) rather than the alias
-> infix.local to deterministically connect to a unit.
+> [!NOTE]
+> When multiple Infix devices are present on the LAN, use the full name,
+> e.g., *infix-c0-ff-ee.local* or *foo.local* rather than the alias
+> *infix.local* to deterministically connect to the device.


-#### Netbrowse service to find all your devices
+### Browse Network Using *network.local*

-Another mDNS alias that all Infix devices can advertise is
-*network.local*. This is a web service which basically runs avahi-browse
-and displays a table of other Infix devices and their services. 
+Another mDNS alias that all Infix devices advertise is *network.local*.
+This is a web service which basically runs `avahi-browse` and displays a
+table of other Infix devices and their services.

 ![Netbrowse Service - network.local](img/network-local.png)

-With multiple Infix devices on the LAN, one will be your portal to
-access all others, if it goes down another will take its place.
+With multiple Infix devices on the LAN, one will take the role of your
+portal to access all others, if it goes down another takes its place.
+
+To disable the netbrowse service, and the *network.local* alias, the
+following commands can be used:

-To disable the netbrowse service, the following commands can be used:
 ```
 admin@infix-c0-ff-ee:/> configure 
 admin@infix-c0-ff-ee:/config/> edit web
@@ -285,6 +317,8 @@ admin@infix-c0-ff-ee:/config/web/> no netbrowse
 admin@infix-c0-ff-ee:/config/web/> leave
 ```

+
+[^1]: E.g., [lldpd](https://github.com/lldp/lldpd) which includes the
+    *lldpcli* too, handy to sniff and display LLDP packets.
 [^2]: [mdns-scan](http://0pointer.de/lennart/projects/mdns-scan/): a
-    tool for scanning for mDNS/DNS-SD published services on the local
-    network
+    tool for scanning for mDNS/DNS-SD services on the local network.
@@ -6,13 +6,7 @@ This column contains the mapping between YANG and Linux / Ethtool counters.
 ┌─────────────────────────────────┬──────────────────────────────────┐
 │ YANG                            │ Linux / Ethtool                  │
 ├─────────────────────────────────┼──────────────────────────────────┤
-│ out-frames                      │ FramesTransmittedOK              │
-├─────────────────────────────────┼──────────────────────────────────┤
-│ out-multicast-frames            │ MulticastFramesXmittedOK         │
-├─────────────────────────────────┼──────────────────────────────────┤
-│ out-broadcast-frames            │ BroadcastFramesXmittedOK         │
-├─────────────────────────────────┼──────────────────────────────────┤
-│ in-total-frames                 │ FramesReceivedOK,                │
+│ in-total-octets                 │ FramesReceivedOK,                │
 │                                 │ FrameCheckSequenceErrors         │
 │                                 │ FramesLostDueToIntMACRcvError    │
 │                                 │ AlignmentErrors                  │
@@ -25,8 +19,23 @@ This column contains the mapping between YANG and Linux / Ethtool counters.
 ├─────────────────────────────────┼──────────────────────────────────┤
 │ in-broadcast-frames             │ BroadcastFramesReceivedOK        │
 ├─────────────────────────────────┼──────────────────────────────────┤
+│ in-error-fcs-frames             │ FrameCheckSequenceErrors         │
+├─────────────────────────────────┼──────────────────────────────────┤
 │ in-error-undersize-frames       │ undersize_pkts                   │
 ├─────────────────────────────────┼──────────────────────────────────┤
-│ in-error-fcs-frames             │ FrameCheckSequenceErrors         │
+| in-error-oversize-frames        | etherStatsJabbers,               |
+|                                 | etherStatsOversizePkts           |
+├─────────────────────────────────┼──────────────────────────────────┤
+│ in-error-mac-internal-frames    │ FramesLostDueToIntMACRcvError    │
+├─────────────────────────────────┼──────────────────────────────────┤
+│ out-frames                      │ FramesTransmittedOK              │
+├─────────────────────────────────┼──────────────────────────────────┤
+│ out-multicast-frames            │ MulticastFramesXmittedOK         │
+├─────────────────────────────────┼──────────────────────────────────┤
+│ out-broadcast-frames            │ BroadcastFramesXmittedOK         │
+├─────────────────────────────────┼──────────────────────────────────┤
+│ infix-eth:out-good-octets       │ OctetsTransmittedOK              │
+├─────────────────────────────────┼──────────────────────────────────┤
+│ infix-eth:in-good-octets        │ OctetsReceivedOK                 │
 └─────────────────────────────────┴──────────────────────────────────┘
 ```
@@ -0,0 +1,195 @@
+# Management
+
+The system utilizes YANG models for keeping configuration and operational
+data. These databases can be managed through different interfaces such
+as NETCONF, RESTCONF, and CLI via SSH or Console.
+
+## SSH Management
+
+An SSH server (SSHv2) is provided for remote management. It can be
+enabled/disabled as shown below.
+
+```
+admin@example:/> configure
+admin@example:/config/> edit ssh
+admin@example:/config/ssh/> set enabled
+admin@example:/config/ssh/>
+```
+
+By default the SSH server accepts connections to port 22 on all its IP
+addresses, but this can be adjusted using the `listen` command. To
+make the server (only) listen for incoming connections to IP address
+_192.168.1.1_ and port _12345_ the following commands can be used.
+
+```
+admin@example:/> configure
+admin@example:/config/> edit ssh
+admin@example:/config/ssh/> show
+enabled true;
+hostkey genkey;
+listen ipv4 {
+  address 0.0.0.0;
+  port 22;
+}
+listen ipv6 {
+  address ::;
+  port 22;
+}
+admin@example:/config/ssh/> no listen ipv6
+admin@example:/config/ssh/> edit listen ipv4
+admin@example:/config/ssh/listen/ipv4/> set address 192.168.1.1
+admin@example:/config/ssh/listen/ipv4/> set port 12345
+admin@example:/config/ssh/listen/ipv4/>
+```
+
+The default SSH hostkey is generated on first boot and is used in both
+SSH and NETCONF (SSH transport). Custom keys can be added to the
+configuration in `ietf-keystore`. The only supported hostkey type is
+RSA for now, thus the private key must be
+`ietf-crypto-types:rsa-private-key-format` and the public key
+`ietf-crypto-types:ssh-public-key-format`
+
+### Use your own SSH hostkeys
+
+Hostkeys can be generated with OpenSSL:
+```bash
+openssl genpkey -quiet -algorithm RSA -pkeyopt rsa_keygen_bits:2048 -outform PEM > mykey
+openssl rsa -RSAPublicKey_out < mykey > mykey.pub
+```
+Store the keys in `ietf-keystore` _without_ the header and footer information
+created by OpenSSL.
+
+After the key has been stored in the keystore and given the name
+_mykey_ it can be added to SSH configuration:
+
+	admin@example:/> configure
+	admin@example:/config/> edit ssh
+	admin@example:/config/ssh/> set hostkey mykey
+
+## Console Port
+
+For units with a console port, it is possible for users to login to
+shell/CLI with functionality similar to what is provided via SSH.
+
+The type and setup for your console port is product specific. For
+instance, it can be a USB-C port connected to the CPU serial port
+using a USB-to-serial converter. To connect you would need a USB-C cable
+connected to the console port of the device. The serial port is
+typically setup to run at 115200 baud, 8N1.
+
+
+```
+Infix -- a Network Operating System v24.11.1 (ttyS0)
+example login: admin
+Password:
+.-------.
+|  . .  | Infix -- a Network Operating System
+|-. v .-| https://kernelkit.org
+'-'---'-'
+
+Run the command 'cli' for interactive OAM
+
+admin@example:~$
+```
+
+The `resize` command can be used to update terminal settings to the
+size of your terminal window.
+
+```
+admin@example:~$ resize
+COLUMNS=115;LINES=59;export COLUMNS LINES;
+admin@example:~$
+```
+
+CLI can be entered from shell in the same way as for SSH.
+
+```
+admin@example:~$ cli
+
+See the 'help' command for an introduction to the system
+
+admin@example:/> show interfaces
+INTERFACE       PROTOCOL   STATE       DATA
+lo              ethernet   UP          00:00:00:00:00:00
+                ipv4                   127.0.0.1/8 (static)
+                ipv6                   ::1/128 (static)
+e1              ethernet   LOWER-DOWN  00:53:00:06:03:01
+e2              ethernet   LOWER-DOWN  00:53:00:06:03:02
+...
+admin@example:/>
+```
+
+## Web, Web-console and RESTCONF
+
+The system provides a set of Web services:
+
+- a rudimentary Web server, currently limited to an information page
+- a RESTCONF server with equivalent management capabilities as NETCONF
+- a Web console service, where the shell/CLI can be accessed via
+  HTTPS, similar to connecting via a console port or SSH
+
+There is also a *Netbrowse* Web service presenting information about
+the unit's neighbors, collected via mDNS (see
+[Discovery](discovery.md) for more details).
+
+```
+admin@example:/> configure
+admin@example:/config/> edit web
+admin@example:/config/web/> help
+  enabled                           Enable or disable on all web services.
+  console                           Web console interface.
+  netbrowse                         mDNS Network Browser.
+  restconf                          IETF RESTCONF Server.
+admin@example:/config/web/>
+```
+
+### Enable/disable Web Service and Server
+
+The Web service can be enabled as shown below.
+
+```
+admin@example:/> configure
+admin@example:/config/> edit web
+admin@example:/config/web/> set enabled
+admin@example:/config/web/> 
+```
+
+Enabling the Web service implies that a Web server is
+enabled. Currently this Web server provides generic Infix information,
+as well as a link to a Web console. The Web server uses HTTPS; any
+HTTP request is redirected to HTTPS.
+
+The _enabled_ setting for the Web service acts as a global
+enable/disable setting for the other Web services (Web console,
+RESTCONF and Netbrowse).
+
+### Enable/disable Web Console
+
+The Web console service provides a terminal service similar to Console
+or SSH. The Web console is secured via HTTPS on port 7861.
+
+The Web console has its own enable/disable setting, but will only be
+activated if the Web service is enabled. The example below shows how
+to disable the Web console.
+
+```
+admin@example:/config/web/> edit console
+admin@example:/config/web/console/> no enabled
+admin@example:/config/web/console/>
+```
+
+### Enable/disable RESTCONF Service
+
+Alternatively, the system can be managed remotely using
+RESTCONF. Meaning you can `curl` it instead of using a dedicated
+NETCONF client.
+
+The RESTCONF service has its own enable/disable setting, but will
+only be activated if the Web service is enabled. The example below
+shows how to disable the RESTCONF service.
+
+```
+admin@example:/config/web/> edit restconf
+admin@example:/config/web/restconf/> no enabled
+admin@example:/config/web/restconf/>
+```
@@ -43,18 +43,18 @@ it.  In this example, traffic assigned to the VLAN in question would be
 diverted to the VLAN interface before entering the bridge, while all
 other traffic would be bridged as usual.

-| **Type** | **Yang Model**             | **Description**                                               |
-|----------|----------------------------|---------------------------------------------------------------|
-| bridge   | infix-if-bridge            | SW implementation of an IEEE 802.1Q bridge                    |
-| ip       | ietf-ip, infix-ip          | IP address to the subordinate interface                       |
-| vlan     | infix-if-vlan              | Capture all traffic belonging to a specific 802.1Q VID        |
-| lag[^1]  | infix-if-lag               | Bonds multiple interfaces into one, creating a link aggregate |
-| lo       | ietf-interfaces            | Software loopback interface                                   |
-| eth      | ieee802-ethernet-interface | Physical Ethernet device/port.                                |
-|          | infix-ethernet-interface   |                                                               |
-| veth     | infix-if-veth              | Virtual Ethernet pair, typically one end is in a container    |
-| *common* | ietf-interfaces,           | Properties common to all interface types                      |
-|          | infix-interfaces           |                                                               |
+| **Type** | **Yang Model**             | **Description**                                              |
+|----------|----------------------------|--------------------------------------------------------------|
+| bridge   | infix-if-bridge            | SW implementation of an IEEE 802.1Q bridge                   |
+| ip       | ietf-ip, infix-ip          | IP address to the subordinate interface                      |
+| vlan     | infix-if-vlan              | Capture all traffic belonging to a specific 802.1Q VID       |
+| lag      | infix-if-lag               | Link aggregation, static and IEEE 802.3ad (LACP)             |
+| lo       | ietf-interfaces            | Software loopback interface                                  |
+| eth      | ieee802-ethernet-interface | Physical Ethernet device/port.                               |
+|          | infix-ethernet-interface   |                                                              |
+| veth     | infix-if-veth              | Virtual Ethernet pair, typically one end is in a container   |
+| *common* | ietf-interfaces,           | Properties common to all interface types                     |
+|          | infix-interfaces           |                                                              |


 ## Data Plane
@@ -154,9 +154,9 @@ fabric!
 #### MAC Bridge

 In Infix ports are by default not switch ports, unless the customer
-specific factory config sets it up this way.  To enable switching
-between ports you create a bridge and then add ports to that
-bridge. That's it.
+specific factory config sets it up this way.  To enable switching, with
+offloading if you have a switch chipset, between ports you create a
+bridge and then add ports to that bridge.  Like this:

 ```
 admin@example:/> configure
@@ -170,13 +170,15 @@ admin@example:/config/> leave
 Here we add two ports to bridge `br0`: `eth0` and `eth1`.

 > [!TIP]
-> Infix has many built-in helpers controlled by convention.  Example,
-> naming your bridge `brN`, where `N` is a number, hints Infix to set
-> interface type automatically and unlocks all bridge features.  Other
-> "magic" names are `vethNA`, where `N` is a number and `A` is a letter
-> ('a' for access port and 'b' for bridge side is common), and `ethN.M`
-> for VLAN M on top of `ethN`, or `dockerN` to create an IP masquerading
-> container bridge.
+> The CLI has several built-in helpers governed by convention.  E.g.,
+> naming bridges `brN`, where `N` is a number, the type is *inferred*
+> automatically and unlocks all bridge features.  Other conventions are
+> `vethNA`, where `N` is a number and `A` is a letter ('a' for access
+> port and 'b' for bridge side is common), and `ethN.M` for VLAN M on
+> top of `ethN`, or `dockerN` for a IP masquerading container bridge.
+>
+> Note, this inference only works with the CLI, configuring networking
+> over NETCONF or RESTCONF requires setting the type explicitly.

 ![A MAC bridge with two ports](img/mac-bridge.svg)

@@ -187,11 +189,11 @@ bridge should be used instead.

 #### VLAN Filtering Bridge

-By default bridges in Linux do not filter based on VLAN tags.  It can be
-enabled in Infix when creating a bridge by adding a port to a VLAN as a
-tagged or untagged member.  Use the port default VID (PVID) setting to
-control VLAN association for traffic ingressing a port untagged (default
-PVID: 1).
+By default bridges in Linux do not filter based on VLAN tags.  This can
+be enabled when creating a bridge by adding a port to a VLAN as a tagged
+or untagged member.  Use the port default VID (PVID) setting to control
+VLAN association for traffic ingressing a port untagged (default PVID:
+1).

 ```
 admin@example:/config/> edit interface br0
@@ -219,10 +221,15 @@ admin@example:/config/interface/br0/> set bridge vlans vlan 10 tagged br0
 admin@example:/config/interface/br0/> set bridge vlans vlan 20 tagged br0
 ```

+To route or to manage via a VLAN, a VLAN interface needs to be created
+on top of the bridge, see section [VLAN Interfaces](#vlan-interfaces)
+below for more on this topic.
+
 > [!NOTE]
-> To route or to manage via a VLAN, a VLAN interface needs to be created
-> on top of the bridge, see section [VLAN Interfaces](#vlan-interfaces)
-> below for more on this topic.
+> In some use-cases only a single management VLAN on the bridge is used.
+> For the example above, if the bridge itself is an untagged member only
+> in VLAN 10, IP addresses can be set directly on the bridge without the
+> need for dedicated VLAN interfaces on top of the bridge.


 #### Multicast Filtering and Snooping
@@ -278,15 +285,15 @@ br0                  224.1.1.1             e3, e2
 br0                  ff02::6a              br0
 ```

-It is a small LAN, so our bridge has already become the elected IGMP
-querier.  We see it is ours because the timeout is `None`, and we
-recognize our IP address.  We can also see two ports that have joined
-the same IPv4 multicast group, 224.1.1.1, and one join from Infix itself
-for the IPv6 group ff02::6a.
+This is a rather small LAN, so our bridge has already become the elected
+IGMP querier.  We see it is ours because the timeout is `None`, and we
+recognize the IP address the system has detected, as ours.  We can also
+see two ports that have joined the same IPv4 multicast group, 224.1.1.1,
+and one join from the system itself for the IPv6 group ff02::6a.

-Now, let's see what happens when we add another bridge, with VLAN
-filtering enabled.  We skip the boring parts about how to move ports
-e4-e7 to `br1` and assign them to VLANs, and again, focus on the
+Now, let us see what happens when we add another bridge, this time with
+VLAN filtering enabled.  We skip the boring parts about how to move
+ports e4-e7 to `br1` and assign them to VLANs, and again, focus on the
 multicast bits only:

 ```
@@ -298,7 +305,7 @@ admin@example:/config/interface/br1/> leave
 admin@example:/> copy running-config startup-config
 ```

-Let's see what we get:
+Let us see what we get:

 ```
 admin@example:/> show ip multicast
@@ -399,15 +406,15 @@ an IGMP/MLD fast-leave port.

 #### Forwarding of IEEE Reserved Group Addresses

-Addresses in range `01:80:C2:00:00:0X` are used by various bridge
-signaling protocols, and are not forwarded by default. Still, it is
-sometimes useful to let the bridge forward such packets, and Infix
-supports this by specifying protocol names or the last address
-*nibble* as decimal value `0..15`.
+Addresses in the range `01:80:C2:00:00:0X` are used by various bridge
+signaling protocols, and are not forwarded by default.  Still, it is
+sometimes useful to let the bridge forward such packets, this can be
+done by specifying protocol names or the last address *nibble* as
+decimal value `0..15`:

 ```
 admin@example:/config/> edit interface br0 bridge
-admin@example:/config/interface/br0/bridge/> set ieee-group-forward <?>
+admin@example:/config/interface/br0/bridge/> set ieee-group-forward     # Tap the ? ley for alternatives
  [0..15]  List of IEEE link-local protocols to forward, e.g., STP, LLDP
  dot1x    802.1X Port-Based Network Access Control.
  lacp     802.3 Slow Protocols, e.g., LACP.
@@ -423,9 +430,268 @@ admin@example:/config/interface/br0/bridge/> set ieee-group-forward lldp
 admin@example:/config/interface/br0/bridge/>
 ```

+
+### Link Aggregation
+
+A link aggregate, or *lag*, allows multiple physical interfaces to be
+combined into a single logical interface, providing increased bandwidth
+(in some cases) and redundancy (primarily).  Two modes of qualifying lag
+member ports are available:
+
+ 1. **static**: Active members selected based on link status (carrier)
+ 2. **lacp:** IEEE 802.3ad Link Aggregation Control Protocol
+
+In LACP mode, LACPDUs are exchanged by the link partners to qualify each
+lag member, while in static mode only carrier is used.  This additional
+exchange in LACP ensures traffic can be forwarded in both directions.
+
+Traffic distribution, for both modes, across the active lag member ports
+is determined by the hash policy[^1].  It uses an XOR of the source,
+destination MAC addresses and the EtherType field.  This, IEEE
+802.3ad-compliant, algorithm will place all traffic to a particular
+network peer on the same link.  Meaning there is no increased bandwidth
+for communication between two specific devices.
+
+> [!TIP]
+> Similar to other interface types, naming your interface `lagN`, where
+> `N` is a number, allows the CLI to automatically infer the interface
+> type as LAG.
+
+
+#### Basic Configuration
+
+Creating a link aggregate interface and adding member ports:
+
+```
+admin@example:/> configure
+admin@example:/config/> edit interface lag0
+admin@example:/config/interface/lag0/> set lag mode static
+admin@example:/config/interface/lag0/> end
+admin@example:/config/> set interface eth7 lag-port lag lag0
+admin@example:/config/> set interface eth8 lag-port lag lag0
+admin@example:/config/> leave
+```
+
+A static lag responds only to link (carrier) changes of member ports.
+E.g., in this example egressing traffic is continuously distributed over
+the two links until link down on one link is detected, triggering all
+traffic to be steered to the sole remaining link.
+
+
+#### LACP Configuration
+
+LACP mode provides dynamic negotiation of the link aggregate.  Key
+settings include:
+
+```
+admin@example:/> configure
+admin@example:/config/> edit interface lag0
+admin@example:/config/interface/lag0/> set lag mode lacp
+admin@example:/config/interface/lag0/> set lag lacp mode passive
+admin@example:/config/interface/lag0/> set lag lacp rate fast
+admin@example:/config/interface/lag0/> set lag lacp system-priority 100
+```
+
+LACP mode supports two operational modes:
+
+ - **active:** Initiates negotiation by sending LACPDUs (default)
+ - **passive:** Waits for peer to initiate negotiation
+
+> [!NOTE]
+> At least one end of the link must be in active mode for negotiation to occur.
+
+The LACP rate setting controls protocol timing:
+
+ - **slow:** LACPDUs sent every 30 seconds, with 90 second timeout (default)
+ - **fast:** LACPDUs sent every second, with 3 second timeout
+
+
+#### Link Flapping
+
+To protect against link flapping, debounce timers can be configured to
+delay link qualification.  Usually only the `up` delay is needed:
+
+```
+admin@example:/config/interface/lag0/lag/link-monitor/> edit debounce
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> set up 500
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> set down 200
+```
+
+#### Operational Status, Overview
+
+Like other interfaces, link aggregates are also available in the general
+interfaces overview in the CLI admin-exec context.  Here is the above
+static mode aggregate:
+
+```
+admin@example:/> show interfaces
+INTERFACE       PROTOCOL   STATE       DATA
+lo              ethernet   UP          00:00:00:00:00:00
+                ipv4                   127.0.0.1/8 (static)
+                ipv6                   ::1/128 (static)
+.
+.
+.
+lag0            lag        UP          static: balance-xor, hash: layer2
+│               ethernet   UP          00:a0:85:00:02:00
+├ eth7          lag        ACTIVE
+└ eth8          lag        ACTIVE
+```
+
+Same aggregate, but in LACP mode:
+
+```
+admin@example:/> show interfaces
+INTERFACE       PROTOCOL   STATE       DATA
+lo              ethernet   UP          00:00:00:00:00:00
+                ipv4                   127.0.0.1/8 (static)
+                ipv6                   ::1/128 (static)
+.
+.
+.
+lag0            lag        UP          lacp: active, rate: fast (1s), hash: layer2
+│               ethernet   UP          00:a0:85:00:02:00
+├ eth7          lag        ACTIVE      active, short_timeout, aggregating, in_sync, collecting, distributing
+└ eth8          lag        ACTIVE      active, short_timeout, aggregating, in_sync, collecting, distributing
+```
+
+
+#### Operational Status, Detail
+
+In addition to basic status shown in the interface overview, detailed
+LAG status can be inspected:
+
+```
+admin@example:/> show interfaces name lag0
+name                : lag0
+index               : 25
+mtu                 : 1500
+operational status  : up
+physical address    : 00:a0:85:00:02:00
+lag mode            : static
+lag type            : balance-xor
+lag hash            : layer2
+link debounce up    : 0 msec
+link debounce down  : 0 msec
+ipv4 addresses      :
+ipv6 addresses      :
+in-octets           : 0
+out-octets          : 2142
+```
+
+Same aggregate, but in LACP mode:
+
+```
+admin@example:/> show interfaces name lag0
+name                : lag0
+index               : 24
+mtu                 : 1500
+operational status  : up
+physical address    : 00:a0:85:00:02:00
+lag mode            : lacp
+lag hash            : layer2
+lacp mode           : active
+lacp rate           : fast (1s)
+lacp aggregate id   : 1
+lacp system priority: 65535
+lacp actor key      : 9
+lacp partner key    : 9
+lacp partner mac    : 00:a0:85:00:03:00
+link debounce up    : 0 msec
+link debounce down  : 0 msec
+ipv4 addresses      :
+ipv6 addresses      :
+in-octets           : 100892
+out-octets          : 111776
+```
+
+Member ports provide additional status information:
+
+ - Link failure counter: number of detected link failures
+ - LACP state flags: various states of LACP negotiation:
+   - `active`: port is actively sending LACPDUs
+   - `short_timeout`: using fast rate (1s) vs. slow rate (30s)
+   - `aggregating`: port is allowed to aggregate in this LAG
+   - `in_sync`: port is synchronized with partner
+   - `collecting`: port is allowed to receive traffic
+   - `distributing`: port is allowed to send traffic
+   - `defaulted`: using default partner info (partner not responding)
+   - `expired`: partner info has expired (no LACPDUs received)
+ - Aggregator ID: unique identifier for this LAG group
+ - Actor state: LACP state flags for this port (local)
+ - Partner state: LACP state flags from the remote port
+
+Example member port status:
+
+```
+admin@example:/> show interfaces name eth7
+name                : eth7
+index               : 8
+mtu                 : 1500
+operational status  : up
+physical address    : 00:a0:85:00:02:00
+lag member          : lag0
+lag member state    : active
+lacp aggregate id   : 1
+lacp actor state    : active, short_timeout, aggregating, in_sync, collecting, distributing
+lacp partner state  : active, short_timeout, aggregating, in_sync, collecting, distributing
+link failure count  : 0
+ipv4 addresses      :
+ipv6 addresses      :
+in-octets           : 473244
+out-octets          : 499037
+```
+
+
+#### Example: Switch Uplink with LACP
+
+LACP mode provides the most robust operation, automatically negotiating
+the link aggregate and detecting configuration mismatches.
+
+A common use case is connecting a switch to an upstream device:
+
+```
+admin@example:/> configure
+admin@example:/config/> edit interface lag0
+admin@example:/config/interface/lag0/> set lag mode lacp
+```
+
+Enable fast LACP for quicker fail-over:
+
+```
+admin@example:/config/interface/lag0/> set lag lacp rate fast
+```
+
+Add uplink ports
+
+```
+admin@example:/config/interface/lag0/> end
+admin@example:/config/> set interface eth7 lag-port lag lag0
+admin@example:/config/> set interface eth8 lag-port lag lag0
+```
+
+Enable protection against "link flapping".
+
+```
+admin@example:/config/interface/lag0/> edit lag link-monitor
+admin@example:/config/interface/lag0/lag/link-monitor/> edit debounce
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> set up 500
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> set down 200
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> top
+```
+
+Add to bridge for switching
+
+```
+admin@example:/config/interface/lag0/lag/link-monitor/debounce/> end
+admin@example:/config/> set interface lag0 bridge-port bridge br0
+admin@example:/config/> leave
+```
+
+
 ### VLAN Interfaces

-Creating a VLAN can be done in many ways. This section assumes VLAN
+Creating a VLAN can be done in many ways.  This section assumes VLAN
 interfaces created atop another Linux interface.  E.g., the VLAN
 interfaces created on top of the Ethernet interface or bridge in the
 picture below.
@@ -465,7 +731,9 @@ As conventions, a VLAN interface for VID 20 on top of an Ethernet
 interface *eth0* is named *eth0.20*, and a VLAN interface for VID 10 on
 top of a bridge interface *br0* is named *vlan10*.

-> **Note:** If you name your VLAN interface `foo0.N` or `vlanN`, where `N` is a number, Infix will set the interface type automatically for you.
+> [!NOTE]
+> If you name your VLAN interface `foo0.N` or `vlanN`, where `N` is a
+> number, the CLI infers the interface type automatically.


 ### Physical Ethernet Interfaces
@@ -631,7 +899,8 @@ admin@example:/config/>
 This section details IP Addresses And Other Per-Interface IP settings.

 Infix support several network interface types, each can be assigned one
-or more IP addresses, both IPv4 and IPv6 are supported.
+or more IP addresses, both IPv4 and IPv6 are supported.  (There is no
+concept of a "primary" address.)

 ![IP on top of network interface examples](img/ip-iface-examples.svg)

@@ -654,31 +923,31 @@ are listed below.  Configurable options can be disabled on a per client
 interface basis, some options, like `clientid` and option 81, are
 possible to set the value of as well.

-| **Opt** | **Name**         | **Cfg** | **Description**                                     |
-|---------|------------------|---------|-----------------------------------------------------|
-| 1       | `subnet`         | No      | Request IP address and netmask                      |
-| 3       | `router`         | Yes     | Default route(s), see also option 121 and 249       |
-| 6       | `dns`            | Yes     | DNS server(s), static ones take precedence          |
-| 12      | `hostname`       | Yes     | DHCP cannot set hostname, only for informing server |
-| 15      | `domain`         | Yes     | Default domain name, for name resolution            |
-| 28      | `broadcast`      | Yes     | Broadcast address, calculated if disabled           |
-| 42      | `ntpsrv`         | Yes     | NTP server(s), static ones take precedence          |
-| 50      | `address`        | Yes     | Request (previously cached) address                 |
-| 61      | `clientid`       | Yes     | Default MAC address (and option 12)                 |
-| 81      | `fqdn`           | Yes     | Similar to option 12, request FQDN update in DNS    |
-| 119     | `search`         | Yes     | Request domain search list                          |
-| 121     | `staticroutes`   | Yes     | Classless static routes                             |
-| 249     | `msstaticroutes` | Yes     | Microsoft static route                              |
-|         |                  |         |                                                     |
+| **Opt** | **Name**                    | **Cfg** | **Description**                                     |
+|---------|-----------------------------|---------|-----------------------------------------------------|
+| 1       | `netmask`                   | No      | Request IP address and netmask                      |
+| 3       | `router`                    | Yes     | Default route(s), see also option 121 and 249       |
+| 6       | `dns-server`                | Yes     | DNS server(s), static ones take precedence          |
+| 12      | `hostname`                  | Yes     | DHCP cannot set hostname, only for informing server |
+| 15      | `domain`                    | Yes     | Default domain name, for name resolution            |
+| 28      | `broadcast`                 | Yes     | Broadcast address, calculated if disabled           |
+| 42      | `ntp-server`                | Yes     | NTP server(s), static ones take precedence          |
+| 50      | `address`                   | Yes     | Request (previously cached) address                 |
+| 61      | `client-id`                 | Yes     | Default MAC address (and option 12)                 |
+| 81      | `fqdn`                      | Yes     | Similar to option 12, request FQDN update in DNS    |
+| 119     | `search`                    | Yes     | Request domain search list                          |
+| 121     | `classless-static-route`    | Yes     | Classless static routes                             |
+| 249     | `ms-classless-static-route` | Yes     | Microsoft static route, same as option 121          |
+|         |                             |         |                                                     |

-**Default:** `router`, `dns`, `domain`, `broadcast`, `ntpsrv`, `search`,
-             `address`, `staticroutes`, `msstaticroutes`
+**Default:** `router`, `dns-server`, `domain`, `broadcast`, `ntp-server`, `search`,
+             `address`, `classless-static-route`, `ms-classless-static-route`

 When configuring a DHCP client, ensure that the NTP client is enabled
-for the `ntpsrv` DHCP option to be processed correctly. If the NTP
+for the `ntp-server` DHCP option to be processed correctly.  If the NTP
 client is not enabled, any NTP servers provided by the DHCP server will
-be ignored. For details on how to enable the NTP client, see the 
-[NTP Client Configuration](system.md#ntp-client-configuration) section.
+be ignored. For details on how to enable the NTP client, see the [NTP
+Client Configuration](system.md#ntp-client-configuration) section.

 > [!IMPORTANT]
 > Per [RFC3442][4], if the DHCP server returns both a Classless Static
@@ -771,7 +1040,6 @@ will be used, otherwise it falls back to the default algorithm.
    admin@example:/> configure
    admin@example:/config/> edit dhcp-client
    admin@example:/config/dhcp-client/> set client-if eth0
-    admin@example:/config/dhcp-client/> set enabled true
    admin@example:/config/dhcp-client/> leave
    admin@example:/> show interfaces
    INTERFACE       PROTOCOL   STATE       DATA
@@ -791,7 +1059,7 @@ The resulting address (10.1.2.100/24) is of type *dhcp*.
 The (only) way to disable IPv6 link-local addresses is by disabling IPv6
 on the interface.

-```(disabling
+```
 admin@example:/> configure
 admin@example:/config/> edit interface eth0 ipv6
 admin@example:/config/interface/eth0/ipv6/> set enabled false
@@ -905,33 +1173,38 @@ have changed type to *random*.
 To be able to route (static or dynamic) on the interface it is
 required to enable forwarding. This setting controls if packets
 received on this interface can be forwarded.
-   ```
-   admin@example:/config/> edit interface eth0
-   admin@example:/config/interface/eth0/> set ipv4 forwarding
-   admin@example:/config/interface/eth0/> leave
-   admin@example:/>
-   ```
+
+```
+admin@example:/config/> edit interface eth0
+admin@example:/config/interface/eth0/> set ipv4 forwarding
+admin@example:/config/interface/eth0/> leave
+admin@example:/>
+```


 ### IPv6 forwarding

-This flag behaves totally different than for IPv4. For IPv6 the
-ability to route between interfaces is always enabled, instead this
-flag controls if the interface will be in host/router mode.
+Due to how the Linux kernel manages IPv6 forwarding, we can not fully
+control it per interface via this setting like how IPv4 works.  Instead,
+IPv6 forwarding is globally enabled when at least one interface enable
+forwarding, otherwise it is disabled.

-| **Feature**                              | **Forward enabled** | **Forward disabled** |
-|:-----------------------------------------|:--------------------|:---------------------|
-| IsRouter set in Neighbour Advertisements | Yes                 | No                   |
-| Transmit Router Solicitations            | No                  | Yes                  |
-| Router Advertisements are ignored        | No                  | Yes                  |
-| Accept Redirects                         | No                  | Yes                  |
+The following table shows the system IPv6 features that the `forwarding`
+setting control when it is *Enabled* or *Disabled:

-   ```
-   admin@example:/config/> edit interface eth0
-   admin@example:/config/interface/eth0/> set ipv6 forwarding
-   admin@example:/config/interface/eth0/> leave
-   admin@example:/>
-   ```
+| **IPv6 Feature**                         | **Enabled** | **Disabled** |
+|:-----------------------------------------|:------------|:-------------|
+| IsRouter set in Neighbour Advertisements | Yes         | No           |
+| Transmit Router Solicitations            | No          | Yes          |
+| Router Advertisements are ignored        | Yes         | Yes          |
+| Accept Redirects                         | No          | Yes          |
+
+```
+admin@example:/config/> edit interface eth0
+admin@example:/config/interface/eth0/> set ipv6 forwarding
+admin@example:/config/interface/eth0/> leave
+admin@example:/>
+```


 ## Routing support
@@ -1219,7 +1492,7 @@ currently supported, namely `ipv4` and `ipv6`.
 [4]: https://www.rfc-editor.org/rfc/rfc3442
 [0]: https://frrouting.org/

-[^1]: Please note, link aggregates are not yet supported in Infix.
+[^1]: `(source MAC XOR destination MAC XOR EtherType) MODULO num_links`
 [^2]: Link-local IPv6 addresses are implicitly enabled when enabling
    IPv6.  IPv6 can be enabled/disabled per interface in the
    [ietf-ip][2] YANG model.
@@ -1230,11 +1503,10 @@ currently supported, namely `ipv4` and `ipv6`.
 [^4]: A YANG deviation was previously used to make it possible to set
    `phys-address`, but this has been replaced with the more flexible
 	`custom-phys-address`.
-[^5]: Infix MAC bridges on Marvell Linkstreet devices are currently
-    limited to use a single MAC database, causing issues if the same
-    MAC address appears on different MAC bridges.
-[^6]: Ethernet counters are described in
-    *ieee802-ethernet-interface.yang* and
-    *infix-ethernet-interface.yang*. [Ethernet
-    Counters](eth-counters.md) page provides additional details on
-    statistics support.
+[^5]: MAC bridges on Marvell Linkstreet devices are currently limited to
+    a single MAC database, this may be a problem if the same MAC address
+    appears in different MAC bridges.
+[^6]: Ethernet counters are described in *ieee802-ethernet-interface.yang*
+    and *infix-ethernet-interface.yang*.  There is a dedicated document on
+    [Ethernet Counters](eth-counters.md) that provide additional details
+    on the statistics support.
@@ -853,14 +853,18 @@ models for details.
 ### Factory Reset

 ```
-~$ curl -kX POST -H "Content-Type: application/yang-data+json" https://example.local/restconf/operations/ietf-factory-default:factory-reset -u admin:admin
+~$ curl -kX POST -u admin:admin \
+        -H "Content-Type: application/yang-data+json" \
+		https://example.local/restconf/operations/ietf-factory-default:factory-reset
 curl: (56) OpenSSL SSL_read: error:0A000126:SSL routines::unexpected eof while reading, errno 0
 ```

 ### System Reboot

 ```
-~$ curl -kX POST -H "Content-Type: application/yang-data+json" https://example.local/restconf/operations/ietf-system:system-restart -u admin:admin
+~$ curl -kX POST -u admin:admin \
+        -H "Content-Type: application/yang-data+json" \
+		https://example.local/restconf/operations/ietf-system:system-restart
 ```

 ### Set Date and Time
@@ -868,7 +872,11 @@ curl: (56) OpenSSL SSL_read: error:0A000126:SSL routines::unexpected eof while r
 Here's an example of an RPC that takes input/argument:

 ```
-~$ curl -kX POST -H "Content-Type: application/yang-data+json" https://example.local/restconf/operations/ietf-system:set-current-datetime -u admin:admin -d '{"ietf-system:input": {"current-datetime": "2024-04-17T13:48:02-01:00"}}'
+~$ curl -kX POST -u admin:admin \
+	    -H "Content-Type: application/yang-data+json" \
+	    -d '{"ietf-system:input": {"current-datetime": "2024-04-17T13:48:02-01:00"}}' \
+		https://example.local/restconf/operations/ietf-system:set-current-datetime
+
 ```

 You can verify that the changes took by a remote SSH command:
@@ -879,6 +887,51 @@ Wed Apr 17 14:48:12 UTC 2024
 ~$
 ```

+### Read Hostname
+
+Example of fetching JSON configuration data to stdout:
+
+```
+~$ curl -kX GET -u admin:admin \
+        -H 'Accept: application/yang-data+json' \
+		https://example.local/restconf/data/ietf-system:system/hostname
+{
+  "ietf-system:system": {
+    "hostname": "foo"
+  }
+}
+```
+
+### Set Hostname
+
+Example of inline JSON data:
+
+```
+~$ curl -kX PATCH -u admin:admin \
+     -H 'Content-Type: application/yang-data+json' \
+     -d '{"ietf-system:system":{"hostname":"bar"}}' \
+     https://example.local/restconf/data/ietf-system:system
+```
+
+### Copy Running to Startup
+
+No copy command available yet to copy between datastores, and the
+Rousette back-end also does not support "write-through" to the
+startup datastore.
+
+To save running-config to startup-config, use the following example to
+fetch running to a local file and then update startup with it:
+
+```
+~$ curl -kX GET -u admin:admin -o running-config.json \
+        -H 'Accept: application/yang-data+json'       \
+         https://example.local/restconf/ds/ietf-datastores:running
+
+~$ curl -kX PUT -u admin:admin -d @running-config.json \
+        -H 'Content-Type: application/yang-data+json'  \
+        https://example.local/restconf/ds/ietf-datastores:startup
+```
+

 ## Miscellaneous

@@ -11,9 +11,10 @@ specific string followed by the last three octets of the system base MAC
 address, e.g., `switch-12-34-56`.  An example of how to change the
 hostname is included below.

-> **Note:** when issuing `leave` to activate your changes, remember to
-> also save your settings, `copy running-config startup-config`.  See
-> the [CLI Introduction](cli/introduction.md) for a background.
+> [!NOTE]
+> When issuing `leave` to activate your changes, remember to also save
+> your settings, `copy running-config startup-config`.  See the [CLI
+> Introduction](cli/introduction.md) for a background.


 ## Changing Password
@@ -24,14 +25,14 @@ available in the system authentication configuration context.
 ```
 admin@host:/config/> edit system authentication user admin
 admin@host:/config/system/authentication/user/admin/> change password
-New password: 
-Retype password: 
+New password:
+Retype password:
 admin@host:/config/system/authentication/user/admin/> leave
 ```

 The `change password` command starts an interactive dialogue that asks
 for the new password, with a confirmation, and then salts and encrypts
-the password with sha512crypt. 
+the password with sha512crypt.

 It is also possible to use the `set password ...` command.  This allows
 setting an already hashed password.  To manually hash a password, use
@@ -39,7 +40,8 @@ the `do password encrypt` command.  This launches the admin-exec command
 to hash, and optionally salt, your password.  This encrypted string can
 then be used with `set password ...`.

-> **Tip:** if you are having trouble thinking of a password, Infix has a
+> [!TIP]
+> If you are having trouble thinking of a password, there is a nifty
 > `password generate` command in admin-exec context which generates
 > random passwords using the UNIX command `pwgen`.  Use the `do` prefix
 > when inside any configuration context to access admin-exec commands.
@@ -55,7 +57,7 @@ With SSH keys in place it is possible to disable password login, just
 remember to verify SSH login and network connectivity before doing so.

 ```
-admin@host:/config/> edit system authentication user admin 
+admin@host:/config/> edit system authentication user admin
 admin@host:/config/system/authentication/user/admin/> edit authorized-key example@host
 admin@host:/config/system/authentication/user/admin/authorized-key/example@host/> set algorithm ssh-rsa
 admin@host:/config/system/authentication/user/admin/authorized-key/example@host/> set key-data 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
@@ -65,9 +67,10 @@ key-data AAAAB3NzaC1yc2EAAAADAQABAAABgQC8iBL42yeMBioFay7lty1C4ZDTHcHyo739gc91rTT
 admin@host:/config/system/authentication/user/admin/authorized-key/example@host/> leave
 ```

-> **Note:** the `ssh-keygen` program already base64 encodes the public
-> key data, so there is no need to use the `text-editor` command, `set`
-> does the job.
+> [!NOTE]
+> The `ssh-keygen` program already base64 encodes the public key data,
+> so there is no need to use the `text-editor` command, `set` does the
+> job.


 ## Multiple Users
@@ -145,7 +148,7 @@ is committed by issuing the `leave` command.
 admin@host:/config/> edit system
 admin@host:/config/system/> set hostname example
 admin@host:/config/system/> leave
-admin@host:/> 
+admin@example:/>
 ```

 The hostname is advertised over mDNS-SD in the `.local` domain.  If
@@ -154,8 +157,24 @@ case, mDNS will advertise a "uniqified" variant, usually suffixing with
 an index, e.g., `example-1.local`.  Use an mDNS browser to scan for
 available devices on your LAN.

-> **Note:** critical services like syslog, mDNS, LLDP, and similar that
-> advertise the hostname, are restarted when the hostname is changed.
+In some cases you may want to set the device's *domain name* as well.
+This is handled the same way:
+
+```
+admin@host:/config/> edit system
+admin@host:/config/system/> set hostname foo.example.com
+admin@host:/config/system/> leave
+admin@foo:/>
+```
+
+Both host and domain name are stored in the system files `/etc/hosts`
+and `/etc/hostname`.  The latter is exclusively for the host name.  The
+domain *may* be used by the system DHCP server when handing out leases
+to clients, it is up to the clients to request the domain name *option*.
+
+> [!NOTE]
+> Critical services like syslog, mDNS, LLDP, and similar that advertise
+> the hostname, are restarted when the hostname is changed.


 ## Changing Login Banner
@@ -164,8 +183,9 @@ The `motd-banner` setting is an Infix augment and an example of a
 `binary` type setting that can be changed interactively with the
 built-in [`text-editor` command](cli/text-editor.md).

-> **Tip:** see the next section for how to change the editor used
-> to something you may be more familiar with.
+> [!TIP]
+> See the next section for how to change the editor used to something
+> you may be more familiar with.

 ```
 admin@host:/config/> edit system
@@ -196,43 +216,90 @@ admin@host:/config/system/> leave
 admin@host:/>
 ```

-> **Note:** as usual, configuration changes only take effect after
-> issuing the `leave` command.  I.e., you must change the editor first,
-> and then re-enter configure context to use your editor of choice.
+> [!IMPORTANT]
+> Configuration changes only take effect after issuing the `leave`
+> command.  I.e., you must change the editor first, and then re-enter
+> configure context to use your editor of choice.
+
+
+## DNS Resolver Configuration
+
+The system supports both static and dynamic (DHCP) DNS setup.  The
+locally configured (static) server is preferred over any acquired
+from a DHCP client.
+
+```
+admin@host:/> configure
+admin@host:/config/> edit system dns-resolver
+admin@host:/config/system/dns-resolver/> set server google udp-and-tcp address 8.8.8.8
+admin@host:/config/system/dns-resolver/> show
+server google {
+  udp-and-tcp {
+    address 8.8.8.8;
+  }
+}
+admin@host:/config/system/dns-resolver/> leave
+```
+
+It is also possible to configure resolver options like timeout and
+retry attempts.  See the YANG model for details, or use the built-in
+help system in the CLI.
+
+> [!NOTE]
+> When acting as a DHCP server and DNS proxy for other devices, any
+> local DNS server configured here is automatically used as upstream DNS
+> server.


 ## NTP Client Configuration

-Below is an example configuration for enabling NTP 
-with a specific server and the `iburst` option for faster initial 
-synchronization.
+Below is an example configuration for enabling NTP with a specific
+server and the `iburst` option for faster initial synchronization.

 ```
 admin@host:/> configure
-admin@host:/config/> set system ntp enabled
-admin@host:/config/> set system ntp server ntp-pool
-admin@host:/config/> set system ntp server ntp-pool udp address pool.ntp.org
-admin@host:/config/> set system ntp server ntp-pool iburst
-admin@host:/config/> set system ntp server ntp-pool prefer
+admin@host:/config/> edit system ntp
+admin@host:/config/system/ntp/> set enabled
+admin@host:/config/system/ntp/> set server ntp-pool
+admin@host:/config/system/ntp/> set server ntp-pool udp address pool.ntp.org
+admin@host:/config/system/ntp/> set server ntp-pool iburst
+admin@host:/config/system/ntp/> set server ntp-pool prefer
+admin@host:/config/system/ntp/> leave
 ```

-This configuration enables the NTP client and sets the NTP server to 
-`pool.ntp.org` with the `iburst` and `prefer` options. The `iburst` 
-option ensures faster initial synchronization, and the `prefer` option 
+This configuration enables the NTP client and sets the NTP server to
+`pool.ntp.org` with the `iburst` and `prefer` options. The `iburst`
+option ensures faster initial synchronization, and the `prefer` option
 designates this server as preferred.

 * `prefer false`: The NTP client will choose the best available source
-based on several factors, such as network delay, stratum, and other 
+based on several factors, such as network delay, stratum, and other
 metrics (default config).
-* `prefer true`: The NTP client will try to use the preferred server 
+* `prefer true`: The NTP client will try to use the preferred server
 as the primary source unless it becomes unreachable or unusable.

+
+### Show NTP Sources
+
+The status for NTP sources is availble in YANG and accessable with
+CLI/NETCONF/RESTCONF.
+
+To view the sources being used by the NTP client, run:
+```
+admin@target:/> show ntp
+ADDRESS         MODE         STATE            STRATUM POLL-INTERVAL
+192.168.1.1     server       candidate              1             6
+192.168.2.1     server       candidate              1             6
+192.168.3.1     server       selected               1             6
+```
+
 ### Show NTP Status

-To check the status of NTP synchronization, use the following command:
+To check the status of NTP synchronization (only availble in CLI), use
+the following command:

 ```
-admin@host:/> show ntp
+admin@host:/> show ntp tracking
 Reference ID    : C0248F86 (192.36.143.134)
 Stratum         : 2
 Ref time (UTC)  : Mon Oct 21 10:06:45 2024
@@ -249,34 +316,14 @@ Leap status     : Normal
 admin@host:/>
 ```

-This output provides detailed information about the NTP status, including 
+This output provides detailed information about the NTP status, including
 reference ID, stratum, time offsets, frequency, and root delay.

-### Show NTP Sources
-
-To view the sources being used by the NTP client, run:
-
-```
-admin@host:/> show ntp sources 
-
-  .-- Source mode  '^' = server, '=' = peer, '#' = local clock.
- / .- Source state '*' = current best, '+' = combined, '-' = not combined,
-| /             'x' = may be in error, '~' = too variable, '?' = unusable.
-||                                                 .- xxxx [ yyyy ] +/- zzzz
-||      Reachability register (octal) -.           |  xxxx = adjusted offset,
-||      Log2(Polling interval) --.      |          |  yyyy = measured offset,
-||                                \     |          |  zzzz = estimated error.
-||                                 |    |           \
-MS Name/IP address         Stratum Poll Reach LastRx Last sample               
-===============================================================================
-^* 192.36.143.134                1   6   177     9   +278ms[ -3845s] +/-  514ms
-admin@host:/>
-```
-
-> The system uses `chronyd` for Network Time Protocol (NTP)
-> synchronization. The output shown here is best explained in the
-> [Chrony documentation](https://chrony-project.org/doc/4.6.1/chronyc.html).
+> [!TIP]
+> The system uses `chronyd` Network Time Protocol (NTP) daemon.  The
+> output shown here is best explained in the [Chrony documentation][4].

 [1]: https://www.rfc-editor.org/rfc/rfc7317
 [2]: https://github.com/kernelkit/infix/blob/main/src/confd/yang/infix-system%402024-02-29.yang
 [3]: https://www.rfc-editor.org/rfc/rfc8341
+[4]: https://chrony-project.org/doc/4.6.1/chronyc.html
@@ -243,23 +243,15 @@ spanning tree matches the expected one.

 Integration to Infix
 --------------------
-To successfully run all Infix tests, the image must be built in 
-'test-mode'. This can be achieved by setting the DISK_IMAGE_TEST_MODE
-parameter to true. Although this is the default setting, it’s advisable
-to verify it by running:
+When the test environment is started with Qeneth, it doesn't use the 
+base image directly. Instead, it creates a copy and inserts a `test-mode`
+flag into it. During the bootstrap phase, the system checks for the 
+presence of the test-mode flag (file).

-    $ make menuconfig
-    (External Options --> -*- Disk image --> [*] Enable Test Mode)
-
-Building an image in 'test-mode' results in the creation of a 'test-mode'
-file within the auxiliary (aux) partition of the Infix disk image 
-(/mnt/aux/test-mode).
-
-During the bootstrap phase, the system checks for the presence of this 
-test-mode flag (file). If the flag exists, a 'test-config.cfg' file is 
-generated. In the following step, the system loads the 'test-config' 
-instead of the standard startup-config (or factory-config). This 
-configuration is simple and safe, equivalent to the one used in 'Secure Mode'
+If the flag exists, a 'test-config.cfg' file is generated. In the 
+following step, the system loads the 'test-config' instead of the
+standard `startup-config` (or `factory-config`). This configuration
+is simple and safe, equivalent to the one used in 'Secure Mode' 
 (also known as 'failure-config').

 Additionally, the configuration enables extra RPCs related to system 
@@ -25,17 +25,6 @@ for `x86_64`:
    $ make
    $ make test

-It is important to mention that Infix build system by default creates
-an image in 'test-mode'. The mode is set by DISK_IMAGE_TEST_MODE
-parameter (default=true). To generate a standard image set the
-DISK_IMAGE_TEST_MODE to 'false'. However, only the test mode ensures
-that all Infix tests are executed properly. Prior to the set of commands
-above, it is always good to check that DISK_IMAGE_TEST_MODE is properly
-set by running:
-
-    $ make menuconfig
-    (External Options --> -*- Disk image --> [*] Enable Test Mode)
-
 ### Physical Devices

 To run the tests on a preexisting topology from the host's network
@@ -99,8 +88,11 @@ arguments:
 To run a suite of tests, e.g., only the DHCP client tests, pass the
 suite as an argument to [9PM][]:

-    11:42:53 infamy0:test # ./9pm/9pm.py case/infix_dhcp/all.yaml
+    11:42:53 infamy0:test # ./9pm/9pm.py case/infix_dhcp/infix_dhcp.yaml

+To run the suite of all tests:
+
+    11:42:53 infamy0:test # ./9pm/9pm.py case/all.yaml

 ### Connecting to Infamy

@@ -315,5 +307,52 @@ The test specifaction can be genererated with:

 	$ make test-spec

+### Test Development
+
+For adding a new test to the automated regression test suite, it's best
+to start by reviewing an existing test case.
+
+All tests are located in the `infix/test/case` repository and are 
+grouped by the features they verify. For example, 
+`infix/test/case/infix_services` contains tests for various Infix 
+services, such as LLDP and mDNS.
+
+While test grouping is flexible, each test should be placed in a 
+logically relevant category.
+
+When creating a new test group, add it to `infix/test/case/all.yaml`,
+to enable it to run as a 
+[subset of the test suite](#running-subsets-of-tests):
+
+```
+- name:  infix-services
+  suite: infix_services/infix_services.yaml
+```
+
+A new test (e.g., lldp_enable_disable) should be added to the 
+corresponding test group .yaml file, such as 
+`infix/test/cases/infix_services.yaml`:
+
+```
+- name: lldp_enable_disable
+  case: lldp_enable_disable/test.py
+```
+
+It is necessary to include the test in 
+`infix/test/case/infix_services/Readme.adoc` to ensure proper test 
+specification generation:
+
+```
+include::lldp_enable_disable/Readme.adoc[]
+```
+
+Each test case should have its own directory under, 
+`infix/test/case/infix_services`, containing: 
+  - `test.py` - the test script
+  - `topology.dot` - the logical topology definition.
+
+When the [test specification](#test-specification) is generated, 
+`topology.svg` and `Readme.adoc` should also be created. 
+
 [9PM]:    https://github.com/rical/9pm
 [Qeneth]: https://github.com/wkz/qeneth
@@ -0,0 +1,28 @@
+# Tunnel configuration
+
+Tunnel traffic from point A to point B
+
+
+## Generic Routing Encapsulation (GRE)
+
+The support for GRE tunnels includes IPv4 and IPv6 tunnels both in GRE
+(IP) and GRETAP (MAC) modes.
+```
+admin@example:/config/> edit interface gre1
+admin@example:/config/interface/gre1/> set type gretap
+admin@example:/config/interface/gre1/> set gre local 192.168.3.1 remote 192.168.3.2
+admin@example:/config/interface/gre1/> leave
+admin@example:/>
+```
+
+##  Virtual eXtensible Local Area Network (VXLAN)
+
+The support for VXLAN tunnels includes IPv4 and IPv6.
+
+```
+admin@example:/config/> edit interface vxlan100
+admin@example:/config/interface/vxlan100/> set vxlan local 192.168.3.1
+admin@example:/config/interface/vxlan100/> set vxlan remote 192.168.3.2
+admin@example:/config/interface/vxlan100/> set vxlan vni 100
+admin@example:/config/interface/vxlan100/> leave
+```
@@ -1,9 +1,7 @@
-IXMSG = printf "\e[37;44m>>>   $(call qstrip,$(1))\e[0m\n"
-
+include $(BR2_EXTERNAL_INFIX_PATH)/infix.mk
 include $(sort $(wildcard $(BR2_EXTERNAL_INFIX_PATH)/package/*/*.mk))
 include $(BR2_EXTERNAL_INFIX_PATH)/board/common/common.mk
 -include $(BR2_EXTERNAL_INFIX_PATH)/board/$(patsubst "%",%,$(BR2_ARCH))/board.mk
-include $(BR2_EXTERNAL_INFIX_PATH)/infix.mk
 include $(BR2_EXTERNAL_INFIX_PATH)/test/test.mk

 .PHONY: local.mk
@@ -1 +1,12 @@
+IXMSG = printf "\e[37;44m>>>   $(call qstrip,$(1))\e[0m\n"
+
+oem-dir := $(call qstrip,$(INFIX_OEM_PATH))
+INFIX_TOPDIR = $(if $(oem-dir),$(oem-dir),$(BR2_EXTERNAL_INFIX_PATH))
+
+# Unless the user specifies an explicit build id, source it from git.
+# The build id also becomes the image version, unless an official
+# release is being built.
+export INFIX_BUILD_ID ?= $(shell git -C $(INFIX_TOPDIR) describe --dirty --always --tags)
+export INFIX_VERSION = $(if $(INFIX_RELEASE),$(INFIX_RELEASE),$(INFIX_BUILD_ID))
+
 INFIX_CFLAGS:=-Wall -Werror -Wextra -Wno-unused-parameter -Wformat=2 -Wformat-overflow=2 -Winit-self -Wstrict-overflow=4 -Wno-format-truncation -Wno-format-nonliteral
@@ -1,5 +1,9 @@
 menu "Packages"

+comment "Hardware Support"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/Config.in"
+
+comment "Software Packages"
 source "$BR2_EXTERNAL_INFIX_PATH/package/bin/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/confd/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/confd-test-mode/Config.in"
@@ -36,5 +40,6 @@ source "$BR2_EXTERNAL_INFIX_PATH/package/sysrepo-cpp/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/rousette/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/nghttp2-asio/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/date-cpp/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/rauc-installation-status/Config.in"

 endmenu
@@ -0,0 +1,10 @@
+menu "Boards"
+
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/alder-alder/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/freescale-imx8mp-evk/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/marvell-cn9130-crb/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/marvell-espressobin/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/microchip-sparx5-pcb135/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/board/styx-dcp-sc-28p/Config.in"
+
+endmenu
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_ALDER_ALDER
+	bool "Alder"
+	depends on BR2_aarch64
+	help
+	  Alder
@@ -0,0 +1,2 @@
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -0,0 +1,53 @@
+define inner-ix-board
+
+$(2)_VERSION = ix-board
+$(2)_LICENSE = BSD-3-Clause
+$(2)_LICENSE_FILES = LICENSE
+$(2)_SITE_METHOD = local
+$(2)_SITE = $$(BR2_EXTERNAL_INFIX_PATH)/src/board/$(1)
+$(2)_REDISTRIBUTE = NO
+
+# The kernel must be built first.
+$(2)_DEPENDENCIES += \
+	linux \
+	$$(BR2_MAKE_HOST_DEPENDENCY)
+
+# This is only defined in some infrastructures (e.g. autotools, cmake),
+# but not in others (e.g. generic). So define it here as well.
+$(2)_MAKE ?= $$(BR2_MAKE)
+
+define $(2)_DTBS_BUILD
+	@$$(call MESSAGE,"Building device tree blob(s)")
+	$$(LINUX_MAKE_ENV) $$($$(PKG)_MAKE) \
+		-C $$(LINUX_DIR) \
+		$$(LINUX_MAKE_FLAGS) \
+		$$($(2)_DTB_MAKE_OPTS) \
+		PWD=$$(@D)/dts \
+		M=$$(@D)/dts \
+		modules
+endef
+$(2)_POST_BUILD_HOOKS += $(2)_DTBS_BUILD
+
+define $(2)_DTBS_INSTALL_TARGET
+	@$$(call MESSAGE,"Installing device tree blob(s)")
+	$$(TARGET_MAKE_ENV) $$(TARGET_CONFIGURE_OPTS) $$($$(PKG)_MAKE) \
+		-f $$(BR2_EXTERNAL_INFIX_PATH)/package/board/dtb-inst.makefile \
+		-C $$(@D)/dts \
+		DESTDIR="$$(TARGET_DIR)" \
+		install
+endef
+$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_DTBS_INSTALL_TARGET
+
+define $(2)_OVERLAY_INSTALL_TARGET
+	@test -d $$(@D)/rootfs && \
+	$$(call MESSAGE,"Copying overlay") && \
+	$$(call SYSTEM_RSYNC,$$(@D)/rootfs,$(TARGET_DIR)) || \
+	true
+endef
+$(2)_POST_INSTALL_TARGET_HOOKS += $(2)_OVERLAY_INSTALL_TARGET
+
+endef
+
+ix-board = $(call inner-ix-board,$(pkgname),$(call UPPERCASE,$(pkgname)))
+
+include $(sort $(wildcard $(BR2_EXTERNAL_INFIX_PATH)/package/board/*/*.mk))
@@ -0,0 +1,9 @@
+include Makefile
+
+install: $(addprefix $(DESTDIR)/boot/,$(dtb-y))
+
+$(DESTDIR)/boot/%.dtb: %.dtb
+	@echo "  DTB-INSTALL $<"
+	@install -D $< $@
+
+.PHONY: install
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_FREESCALE_IMX8MP_EVK
+	bool "NXP i.MX8MP EVK"
+	depends on BR2_aarch64
+	help
+	  NXP i.MX8MP EVK
+
@@ -0,0 +1,26 @@
+define FREESCALE_IMX8MP_EVK_LINUX_CONFIG_FIXUPS
+	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_NXP)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MXC)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_FEC)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_STMICRO)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_ETH)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_DWMAC_IMX8)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_IMX)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_IMX_CONSOLE)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_I2C_IMX)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_SPI_IMX)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_IMX8MP)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_GPIO_MXC)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_IMX2_WDT)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_SDHCI_OF_ESDHC)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_SDHCI_ESDHC_IMX)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_CLK_IMX8MP)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_NVMEM_IMX_OCOTP)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_INTERCONNECT_IMX8MP)
+	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
+endef
+
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_MARVELL_CN9130_CRB
+	bool "Marvell CN9130-CRB"
+	depends on BR2_aarch64
+	help
+	  Customer Reference Board for CN9130
@@ -0,0 +1,2 @@
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_MARVELL_ESPRESSOBIN
+	bool "Marvell ESPRESSObin"
+	depends on BR2_aarch64
+	help
+	  Marvell ESPRESSObin
@@ -0,0 +1,2 @@
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_MICROCHIP_SPARX5_PCB135
+	bool "Microchip SparX-5i PCB135"
+	depends on BR2_aarch64
+	help
+	  Microchip's evaluation board for SparX-5i
@@ -0,0 +1,2 @@
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_STYX_DCP_SC_28P
+	bool "Styx DCP-SC-28P"
+	depends on BR2_aarch64
+	help
+	  Styx DCP-SC-28P
@@ -0,0 +1,2 @@
+$(eval $(ix-board))
+$(eval $(generic-package))
@@ -1,3 +1,9 @@
+################################################################################
+#
+# confd-test-mode
+#
+################################################################################
+
 CONFD_TEST_MODE_VERSION = 1.0
 CONFD_TEST_MODE_SITE_METHOD = local
 CONFD_TEST_MODE_SITE = $(BR2_EXTERNAL_INFIX_PATH)/src/test-mode
@@ -16,7 +22,8 @@ COMMON_SYSREPO_ENV = \

 define CONFD_TEST_MODE_INSTALL_YANG_MODULES
        $(COMMON_SYSREPO_ENV) \
-        SEARCH_PATH="$(TARGET_DIR)/usr/share/yang/modules/test-mode/" $(BR2_EXTERNAL_INFIX_PATH)/utils/sysrepo-load-modules.sh $(@D)/yang/test-mode.inc
+        SEARCH_PATH="$(TARGET_DIR)/usr/share/yang/modules/test-mode/" \
+	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/test-mode.inc
 endef
 define CONFD_TEST_MODE_PERMISSIONS
 	/etc/sysrepo/data/ r 660 root wheel - - - - -
@@ -17,17 +17,15 @@ run name:startup log:prio:user.notice norestart <pid/confd> env:/etc/default/con
 	-- Loading startup-config

 # Run if loading startup-config fails for some reason
-run name:failure log:prio:user.critical norestart <pid/confd> env:/etc/default/confd if:<run/startup/failure> \
-	[S] /usr/libexec/confd/load -t $CONFD_TIMEOUT failure-config \
+run	name:failure log:prio:user.crit norestart env:/etc/default/confd \
+	if:<run/startup/failure> \
+	[S] <pid/confd> /usr/libexec/confd/load -t $CONFD_TIMEOUT failure-config \
 	-- Loading failure-config

-run name:error :2 log:console norestart if:<run/failure/failure> \
+run	name:error :2 log:console norestart \
+	if:<run/failure/failure> \
 	[S] /usr/libexec/confd/error --

-service name:netopeer notify:none log <pid/confd> env:/etc/default/confd \
-	[12345] netopeer2-server -F -t $CONFD_TIMEOUT -v 1 \
+service name:netopeer notify:none log env:/etc/default/confd \
+	[12345] <pid/confd> netopeer2-server -F -t $CONFD_TIMEOUT -v 1 \
 	-- NETCONF server
-
-# Create initial /etc/resolv.conf after successful bootstrap
-task name:resolv :conf norestart <pid/dnsmasq> if:<run/startup/success> \
-	[S] resolvconf -u -- Update DNS configuration
@@ -4,7 +4,7 @@
 #
 ################################################################################

-CONFD_VERSION = 1.2
+CONFD_VERSION = 1.5
 CONFD_SITE_METHOD = local
 CONFD_SITE = $(BR2_EXTERNAL_INFIX_PATH)/src/confd
 CONFD_LICENSE = BSD-3-Clause
@@ -26,8 +26,10 @@ CONFD_CONF_OPTS += --disable-containers
 endif

 define CONFD_INSTALL_EXTRA
-	cp $(CONFD_PKGDIR)/confd.conf  $(FINIT_D)/available/
-	ln -sf ../available/confd.conf $(FINIT_D)/enabled/confd.conf
+	for fn in confd.conf resolvconf.conf; do \
+		cp $(CONFD_PKGDIR)/$$fn  $(FINIT_D)/available/; \
+		ln -sf ../available/$$fn $(FINIT_D)/enabled/$$fn; \
+	done
 	cp $(CONFD_PKGDIR)/tmpfiles.conf $(TARGET_DIR)/etc/tmpfiles.d/confd.conf
 	mkdir -p $(TARGET_DIR)/etc/avahi/services
 	cp $(CONFD_PKGDIR)/avahi.service $(TARGET_DIR)/etc/avahi/services/netconf.service
@@ -41,13 +43,13 @@ COMMON_SYSREPO_ENV = \

 define CONFD_INSTALL_YANG_MODULES
 	$(COMMON_SYSREPO_ENV) \
-	$(BR2_EXTERNAL_INFIX_PATH)/utils/sysrepo-load-modules.sh $(@D)/yang/confd.inc
+	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/confd.inc
 endef

 ifeq ($(BR2_PACKAGE_PODMAN),y)
 define CONFD_INSTALL_YANG_MODULES_CONTAINERS
 	$(COMMON_SYSREPO_ENV) \
-	$(BR2_EXTERNAL_INFIX_PATH)/utils/sysrepo-load-modules.sh $(@D)/yang/containers.inc
+	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/containers.inc
 endef
 endif

@@ -63,9 +65,7 @@ endef
 CONFD_PRE_INSTALL_TARGET_HOOKS += CONFD_CLEANUP
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_EXTRA
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES
-ifeq ($(BR2_PACKAGE_PODMAN),y)
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_CONTAINERS
-endif
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_CLEANUP

 $(eval $(autotools-package))
@@ -0,0 +1,3 @@
+# Create initial /etc/resolv.conf after successful bootstrap, regardless
+# of startup-config or failure-config.  Condition set by confd.
+task [S12345] <usr/bootstrap> resolvconf -u -- Update DNS configuration
@@ -1,7 +1 @@
-d  /run/containers/args		0700 - -
-d  /run/containers/files	0700 - -
-d  /var/lib/containers/oci	0755 - -
-d  /run/containers/inbox	0700 - -
 d  /run/containers/queue	0700 - -
-d  /run/cni			0755 - -
-L+ /var/lib/cni                 -    - - - /run/cni
@@ -1,3 +1,3 @@
 # Locally calculated
 sha256  9d9d33b873917ca5d0bdcc47a36d2fd385971ab0c045d1472fcadf95ee5bcf5b  LICENCE
-sha256  f8725f39b9d9d45c8ad6fd2cfc3c1c834a80c32b4217a3d07dd8ed7fe4b6e352  faux-df1d569287bc45d8fd880287c00e3874c5627c19-br1.tar.gz
+sha256  b385d30b88cab31bf910436ceb1262947bf34a19ca85098c28510e639dc4b37d  faux-df1d569287bc45d8fd880287c00e3874c5627c19-git4.tar.gz
@@ -1,67 +0,0 @@
-From 46ffa81f5c88ce95db011369d8bfb802313e4217 Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Thu, 17 Oct 2024 14:23:24 +0200
-Subject: [PATCH 1/6] Only mark rdeps dirty if main service is nohup
-Organization: Addiva Elektronik
-
-This patch changes a behavior that's been default since Finit 4.0,
-introduced in 4d05bf9 with 4.0-rc2.
-
-If service B depends on A and A needs to be reloaded, then B may be
-affected.  If A is declared as NOHUP <!>, then A will be stopped and
-restarted, during which time the condition it provides is removed,
-and B will also be stopped.
-
-However, and as of this patch, if A is declared supporting HUP, then the
-condition A provides will only go into flux, during which time B will be
-SIGSTOPed instead of needing to be reloaded.
-
-Fix #415
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- src/service.c | 8 ++++++++
- src/svc.h     | 1 +
- 2 files changed, 9 insertions(+)
-
-diff --git a/src/service.c b/src/service.c
-index 61be85c..b995ff4 100644
--- a/src/service.c
-+++ b/src/service.c
-@@ -2001,6 +2001,10 @@ static void svc_mark_affected(char *cond)
-  * Called on conf_reload() to update service reverse dependencies.
-  * E.g., if ospfd depends on zebra and the zebra Finit conf has
-  * changed, we need to mark the ospfd Finit conf as changed too.
-+ *
-+ * However, a daemon that depends on syslogd (sysklogd project), need
-+ * not be reloeaded (SIGHUP'ed or stop/started) because syslogd support
-+ * reloading its configuration file on SIGHUP.
-  */
- void service_update_rdeps(void)
- {
-@@ -2012,6 +2016,10 @@ void service_update_rdeps(void)
- 		if (!svc_is_changed(svc))
- 			continue;
- 
-+		/* Service supports reloading conf without stop/start  */
-+		if (!svc_is_nohup(svc))
-+			continue; /* Yup, no need to stop start rdeps */
-+
- 		svc_mark_affected(mkcond(svc, cond, sizeof(cond)));
- 	}
- }
-diff --git a/src/svc.h b/src/svc.h
-index d00ac14..e2f6bd8 100644
--- a/src/svc.h
-+++ b/src/svc.h
-@@ -259,6 +259,7 @@ static inline int svc_is_tty       (svc_t *svc) { return svc && SVC_TYPE_TTY
- static inline int svc_is_runtask   (svc_t *svc) { return svc && (SVC_TYPE_RUNTASK & svc->type);}
- static inline int svc_is_forking   (svc_t *svc) { return svc && svc->forking; }
- static inline int svc_is_manual    (svc_t *svc) { return svc && svc->manual; }
-+static inline int svc_is_nohup     (svc_t *svc) { return svc && (0 == svc->sighup); }
- 
- static inline int svc_in_runlevel  (svc_t *svc, int runlevel) { return svc && ISSET(svc->runlevels, runlevel); }
- static inline int svc_nohup        (svc_t *svc) { return svc &&  (0 == svc->sighup || 0 != svc->args_dirty); }
-- 
-2.43.0
-
@@ -1,33 +0,0 @@
-From 119e66a7e9c95283918639b51dd03a3d666955f8 Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Mon, 28 Oct 2024 10:58:04 +0100
-Subject: [PATCH 2/6] Reset color attributes and clear screen when starting up
-Organization: Addiva Elektronik
-
-Some boot loaders, like GRUB, leave background color artifacts from
-their boot menu.  This patch resets the foreground and background
-color attributes, and then clears the screen, without clearing the
-scrollback buffer.
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- src/helpers.c | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/src/helpers.c b/src/helpers.c
-index 8768de8..99c4557 100644
--- a/src/helpers.c
-+++ b/src/helpers.c
-@@ -87,6 +87,9 @@ void console_init(void)
- 	/* Enable line wrap, if disabled previously, e.g., qemu */
- 	dprint(STDOUT_FILENO, "\033[?7h", 5);
- 
-+	/* Reset atttributes, background and foreground color  */
-+	dprint(STDOUT_FILENO, "\033[49m\033[39m\e[2J", 14);
-+
- 	log_init();
- }
- 
-- 
-2.43.0
-
@@ -1,196 +0,0 @@
-From 0c0e880f3fdd38f7bbde618408378dc0a19ff005 Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Sun, 3 Nov 2024 09:39:46 +0100
-Subject: [PATCH 3/6] plugins: refactor rtc.so
-Organization: Addiva Elektronik
-
-Factor out time_set() and time_get() for readability and reuse.
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- plugins/rtc.c | 116 +++++++++++++++++++++++++++++---------------------
- 1 file changed, 68 insertions(+), 48 deletions(-)
-
-diff --git a/plugins/rtc.c b/plugins/rtc.c
-index 238791f..9520c7d 100644
--- a/plugins/rtc.c
-+++ b/plugins/rtc.c
-@@ -68,6 +68,60 @@ static void tz_restore(char *tz)
- 	tzset();
- }
- 
-+static int time_set(struct tm *tm)
-+{
-+	struct tm fallback = { 0 };
-+	struct timeval tv = { 0 };
-+	char tz[128];
-+	int rc = 0;
-+
-+	tz_set(tz, sizeof(tz));
-+
-+	if (!tm) {
-+		logit(LOG_NOTICE, "Resetting system clock to kernel default, %s.", rtc_timestamp);
-+		tm = &fallback;
-+
-+		/* Attempt to set RTC to a sane value ... */
-+		tv.tv_sec = rtc_date_fallback;
-+		if (!gmtime_r(&tv.tv_sec, tm)) {
-+			rc = 1;
-+			goto out;
-+		}
-+	}
-+
-+	tm->tm_isdst = -1; /* Use tzdata to figure it out, please. */
-+	tv.tv_sec = mktime(tm);
-+	if (tv.tv_sec == (time_t)-1 || tv.tv_sec < rtc_date_fallback) {
-+		errno = EINVAL;
-+		rc = 2;
-+	} else {
-+		if (settimeofday(&tv, NULL) == -1)
-+			rc = 1;
-+	}
-+out:
-+	tz_restore(tz);
-+	return rc;
-+}
-+
-+static int time_get(struct tm *tm)
-+{
-+	struct timeval tv = { 0 };
-+	char tz[128];
-+	int rc = 0;
-+
-+	tz_set(tz, sizeof(tz));
-+
-+	rc = gettimeofday(&tv, NULL);
-+	if (rc < 0 || tv.tv_sec < rtc_date_fallback)
-+		rc = 2;
-+	else
-+		gmtime_r(&tv.tv_sec, tm);
-+
-+	tz_restore(tz);
-+
-+	return rc;
-+}
-+
- static int rtc_open(void)
- {
- 	char *alt[] = {
-@@ -91,10 +145,8 @@ static int rtc_open(void)
- 
- static void rtc_save(void *arg)
- {
-	struct timeval tv = { 0 };
- 	struct tm tm = { 0 };
- 	int fd, rc = 0;
-	char tz[128];
- 
- 	if (rescue) {
- 		dbg("Skipping %s plugin in rescue mode.", __FILE__);
-@@ -105,38 +157,26 @@ static void rtc_save(void *arg)
- 	if (fd < 0)
- 		return;
- 
-	tz_set(tz, sizeof(tz));
-	rc = gettimeofday(&tv, NULL);
-	if (rc < 0 || tv.tv_sec < rtc_date_fallback) {
-+	if ((rc = time_get(&tm))) {
- 		print_desc(NULL, "System clock invalid, not saving to RTC");
-	invalid:
-		logit(LOG_ERR, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
-		rc = 2;
-		goto out;
-+	} else {
-+		print_desc(NULL, "Saving system clock (UTC) to RTC");
-+		rc = ioctl(fd, RTC_SET_TIME, &tm);
- 	}
- 
-	print_desc(NULL, "Saving system time (UTC) to RTC");
-
-	gmtime_r(&tv.tv_sec, &tm);
-	if (ioctl(fd, RTC_SET_TIME, &tm) < 0) {
-		if (EINVAL == errno)
-			goto invalid;
-		rc = 1;
-		goto out;
-+	if (rc && errno == EINVAL) {
-+		logit(LOG_ERR, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
-+		rc = 2;
- 	}
- 
-out:
-	tz_restore(tz);
- 	print(rc, NULL);
- 	close(fd);
- }
- 
- static void rtc_restore(void *arg)
- {
-	struct timeval tv = { 0 };
- 	struct tm tm = { 0 };
- 	int fd, rc = 0;
-	char tz[128];
- 
- 	if (rescue) {
- 		dbg("Skipping %s plugin in rescue mode.", __FILE__);
-@@ -149,16 +189,19 @@ static void rtc_restore(void *arg)
- 		return;
- 	}
- 
-	tz_set(tz, sizeof(tz));
-	if (ioctl(fd, RTC_RD_TIME, &tm) < 0) {
-+	if ((rc = ioctl(fd, RTC_RD_TIME, &tm)) < 0) {
- 		char msg[120];
- 
- 		snprintf(msg, sizeof(msg), "Failed restoring system clock, %s",
- 			 EINVAL == errno ? "RTC time is too old"   :
- 			 ENOENT == errno ? "RTC has no saved time" : "see log for details");
- 		print_desc(NULL, msg);
-+	} else {
-+		print_desc(NULL, "Restoring system clock (UTC) from RTC");
-+		rc = time_set(&tm);
-+	}
- 
-	invalid:
-+	if (rc) {
- 		logit(LOG_ERR, "Failed restoring system clock from RTC.");
- 		if (EINVAL == errno)
- 			logit(LOG_ERR, "RTC time is too old (before %s)", rtc_timestamp);
-@@ -167,33 +210,10 @@ static void rtc_restore(void *arg)
- 		else
- 			logit(LOG_ERR, "RTC error code %d: %s", errno, strerror(errno));
- 
-		/* Been here already? */
-		if (rc)
-			goto out;
-
-		/* Attempt to set RTC to a sane value ... */
-		tv.tv_sec = rtc_date_fallback;
-		if (!gmtime_r(&tv.tv_sec, &tm))
-			goto out;
-
-		logit(LOG_NOTICE, "Resetting RTC to kernel default, %s.", rtc_timestamp);
-+		time_set(NULL);
- 		rc = 2;
- 	}
- 
-	if (!rc)
-		print_desc(NULL, "Restoring system clock (UTC) from RTC");
-	tm.tm_isdst = -1; /* Use tzdata to figure it out, please. */
-	tv.tv_sec = mktime(&tm);
-	if (tv.tv_sec == (time_t)-1 || tv.tv_sec < rtc_date_fallback) {
-		errno = EINVAL;
-		goto invalid;
-	}
-
-	if (settimeofday(&tv, NULL) == -1)
-		rc = 1;
-
-out:
-	tz_restore(tz);
- 	print(rc, NULL);
- 	close(fd);
- }
-- 
-2.43.0
-
@@ -1,239 +0,0 @@
-From bc8118d515839dc598f437aa01f07a771646968d Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Sun, 3 Nov 2024 09:47:16 +0100
-Subject: [PATCH 4/6] Fix #418: support systems with a broken RTC
-Organization: Addiva Elektronik
-
-This patch introduces a new configure option --with-rtc-file=FILE.  When
-enabled the RTC plugin detects missing RTC device and falls back to save
-and restore system time from a file instead.  When --with-rtc-file is
-used without an argument the default file is /var/lib/misc/rtc, but the
-feature itself is disabled by default.
-
-The usefulness of this feature may not be obvious at first, but some
-systems are equipped with an RTC that resets to a random date at power
-on.  This can be really bad in the case the date is far in the future,
-because an NTP sync would then cause time skips backwards, which shows
-up in logs and causes a whole lot of pain in alarm systems.
-
-The solution is to disable the RTC driver or device tree node, and when
-Finit starts up, the RTC plugin detects a the device node and instead
-restores time from the last save game.  Meaning time will always only
-move forwards.
-
-NOTE: when Finit is built --with-rtc-file we always save to disk, but
-      only restore from the "save game" if restoring from RTC fails.
-      If the system has no RTC we always restore from disk.
-
-      As an added bonus, this change also makes sure to periodically
-      sync also the RTC with the system clock.  Useful for systems
-      that do not run an NTP client.
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- configure.ac  |  12 ++++++
- plugins/rtc.c | 105 ++++++++++++++++++++++++++++++++++++++++++++++----
- 2 files changed, 110 insertions(+), 7 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 483457f..ae7cd23 100644
--- a/configure.ac
-+++ b/configure.ac
-@@ -180,6 +180,10 @@ AC_ARG_WITH(rtc-date,
- 	AS_HELP_STRING([--with-rtc-date=DATE], [If RTC date/time is too old, restore to DATE, format "YYYY-MM-DD HH:MM", default "2000-01-01 00:00"]),
- 	[rtc_date=$withval], [rtc_date=no])
- 
-+AC_ARG_WITH(rtc-file,
-+        AS_HELP_STRING([--with-rtc-file=FILE], [If RTC is missing, save and restore system clock from this file, default: no]),
-+	[rtc_file=$withval], [rtc_file=no])
-+
- ### Enable features ###########################################################################
- 
- # Create config.h from selected features and fallback defaults
-@@ -281,6 +285,13 @@ AS_IF([test "x$rtc_date" != "xno"], [
- 	AC_DEFINE(RTC_TIMESTAMP_CUSTOM, "$rtc_date", [Custom RTC restore date, default: 2000-01-01 00:00])], [
- 	rtc_date=""])
- 
-+AS_IF([test "x$rtc_file" != "xno"], [
-+	AS_IF([test "x$rtc_file" = "xyes"], [
-+		rtc_file=/var/lib/misc/rtc])
-+	AC_EXPAND_DIR(rtcfile_path, "$rtc_file")
-+	AC_DEFINE_UNQUOTED(RTC_FILE, "$rtcfile_path", [Save and restore system time from this file if /dev/rtc is missing.])],[
-+	AC_DEFINE_UNQUOTED(RTC_FILE, NULL)])
-+
- AS_IF([test "x$with_keventd" != "xno"], [with_keventd=yes])
- 
- AS_IF([test "x$with_sulogin" != "xno"], [
-@@ -387,6 +398,7 @@ Behavior:
-   Boot heading..........: $heading
-   Plugins...............: $plugins
-   RTC restore date......: $RTC_DATE
-+  RTC fallback file.....: $rtc_file
- 
- Optional features:
-   Install doc/..........: $enable_doc
-diff --git a/plugins/rtc.c b/plugins/rtc.c
-index 9520c7d..9b4eeae 100644
--- a/plugins/rtc.c
-+++ b/plugins/rtc.c
-@@ -36,8 +36,15 @@
- #include "helpers.h"
- #include "plugin.h"
- 
-/* Kernel RTC driver validates against this date for sanity check */
-+/*
-+ * Kernel RTC driver validates against this date for sanity check.  The
-+ * on NTP sync the driver can also update the RTC every 11 mins.  We use
-+ * the same update interval to handle manual time set and file save.
-+ */
- #define RTC_TIMESTAMP_BEGIN_2000 "2000-01-01 00:00:00"
-+#define RTC_FMT                  "%Y-%m-%d %H:%M:%S"
-+#define RTC_PERIOD               (11 * 60 * 1000)
-+
- #ifdef  RTC_TIMESTAMP_CUSTOM
- static char  *rtc_timestamp     = RTC_TIMESTAMP_CUSTOM;
- #else
-@@ -45,6 +52,10 @@ static char  *rtc_timestamp     = RTC_TIMESTAMP_BEGIN_2000;
- #endif
- static time_t rtc_date_fallback = 946684800LL;
- 
-+static char  *rtc_file          = RTC_FILE;
-+static uev_t  rtc_timer;
-+
-+
- static void tz_set(char *tz, size_t len)
- {
- 	char *ptr;
-@@ -122,6 +133,68 @@ static int time_get(struct tm *tm)
- 	return rc;
- }
- 
-+static void file_save(void *arg)
-+{
-+	struct tm tm = { 0 };
-+	int rc = 0;
-+	FILE *fp;
-+
-+	fp = fopen(rtc_file, "w");
-+	if (!fp) {
-+		logit(LOG_WARNING, "Failed saving system clock to %s, code %d: %s",
-+		      rtc_file, errno, strerror(errno));
-+		return;
-+	}
-+
-+	if ((rc = time_get(&tm))) {
-+		logit(LOG_ERR, "System clock invalid, before %s, not saving", rtc_timestamp);
-+		print_desc(NULL, "System clock invalid, skipping");
-+	} else {
-+		char buf[32] = { 0 };
-+
-+		print_desc(NULL, "Saving system clock to file");
-+		strftime(buf, sizeof(buf), RTC_FMT, &tm);
-+		fprintf(fp, "%s\n", buf);
-+	}
-+
-+	print(rc, NULL);
-+	fclose(fp);
-+}
-+
-+static void file_restore(void *arg)
-+{
-+	struct tm tm = { 0 };
-+	int rc = 1;
-+	FILE *fp;
-+
-+	if (!rtc_file) {
-+		logit(LOG_NOTICE, "System has no RTC (missing driver?), skipping restore.");
-+		return;
-+	}
-+
-+	print_desc(NULL, "Restoring system clock from backup");
-+
-+	fp = fopen(rtc_file, "r");
-+	if (fp) {
-+		char buf[32];
-+
-+		if (fgets(buf, sizeof(buf), fp)) {
-+			chomp(buf);
-+			strptime(buf, RTC_FMT, &tm);
-+			rc = time_set(&tm);
-+		}
-+		fclose(fp);
-+	} else
-+		logit(LOG_WARNING, "Missing %s", rtc_file);
-+
-+	if (rc) {
-+		time_set(NULL);
-+		rc = 2;
-+	}
-+
-+	print(rc, NULL);
-+}
-+
- static int rtc_open(void)
- {
- 	char *alt[] = {
-@@ -185,7 +258,7 @@ static void rtc_restore(void *arg)
- 
- 	fd = rtc_open();
- 	if (fd < 0) {
-		logit(LOG_NOTICE, "System has no RTC (missing driver?), skipping restore.");
-+		file_restore(arg);
- 		return;
- 	}
- 
-@@ -210,21 +283,37 @@ static void rtc_restore(void *arg)
- 		else
- 			logit(LOG_ERR, "RTC error code %d: %s", errno, strerror(errno));
- 
-		time_set(NULL);
-		rc = 2;
-	}
-+		print(2, NULL);
-+
-+		/* Try restoring from last save game */
-+		if (rtc_file)
-+			file_restore(arg);
-+	} else
-+		print(0, NULL);
- 
-	print(rc, NULL);
- 	close(fd);
- }
- 
-+
-+static void save(void *arg)
-+{
-+	rtc_save(arg);
-+	file_save(arg);
-+}
-+
-+static void update(uev_t *w, void *arg, int events)
-+{
-+	save(arg);
-+}
-+
-+
- static plugin_t plugin = {
- 	.name = __FILE__,
- 	.hook[HOOK_BASEFS_UP] = {
- 		.cb  = rtc_restore
- 	},
- 	.hook[HOOK_SHUTDOWN] = {
-		.cb  = rtc_save
-+		.cb  = save
- 	}
- };
- 
-@@ -237,6 +326,8 @@ PLUGIN_INIT(plugin_init)
- 	else
- 		rtc_timestamp = RTC_TIMESTAMP_BEGIN_2000;
- 
-+	uev_timer_init(ctx, &rtc_timer, update, NULL, RTC_PERIOD, RTC_PERIOD);
-+
- 	plugin_register(&plugin);
- }
- 
-- 
-2.43.0
-
@@ -1,73 +0,0 @@
-From 6be16f2f6d093ef495d0fe4313f7b05b4ba3e08f Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Sun, 3 Nov 2024 10:38:38 +0100
-Subject: [PATCH 5/6] Fix buggy --with-rtc-date=DATE, introduced in Finit v4.4
-Organization: Addiva Elektronik
-
-In 42ef3d3c, for v4.4-rc1, support for setting a custom RTC restore date
-was introduced.  Unfortunately the configure script was wrong and caused
-config.h to contain
-
-    #define RTC_TIMESTAMP_CUSTOM "$rtc_date"
-
-instead of
-
-    #define RTC_TIMESTAMP_CUSTOM "2023-04-10 14:35:42"
-
-Furthermore, the error handling for strptime() was wrong, so the restore
-date was always reverted to the default.
-
-This patch fixes both issues and extends the DATE of --with-rtc-date to
-also include seconds.
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- configure.ac  | 4 ++--
- plugins/rtc.c | 8 +++++---
- 2 files changed, 7 insertions(+), 5 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index ae7cd23..58b78ac 100644
--- a/configure.ac
-+++ b/configure.ac
-@@ -177,7 +177,7 @@ AC_ARG_WITH(plugin-path,
- 	[plugin_path=$withval], [plugin_path=yes])
- 
- AC_ARG_WITH(rtc-date,
-	AS_HELP_STRING([--with-rtc-date=DATE], [If RTC date/time is too old, restore to DATE, format "YYYY-MM-DD HH:MM", default "2000-01-01 00:00"]),
-+	AS_HELP_STRING([--with-rtc-date=DATE], [If RTC date/time is too old, restore to DATE, format "YYYY-MM-DD HH:MM:SS", default "2000-01-01 00:00:00"]),
- 	[rtc_date=$withval], [rtc_date=no])
- 
- AC_ARG_WITH(rtc-file,
-@@ -282,7 +282,7 @@ AS_IF([test "x$with_random_seed" != "xno"], [
- 	AC_DEFINE_UNQUOTED(RANDOMSEED, "$random_path", [Improve random at boot by seeding it with sth from before.])])
- 
- AS_IF([test "x$rtc_date" != "xno"], [
-	AC_DEFINE(RTC_TIMESTAMP_CUSTOM, "$rtc_date", [Custom RTC restore date, default: 2000-01-01 00:00])], [
-+	AC_DEFINE_UNQUOTED(RTC_TIMESTAMP_CUSTOM, "$rtc_date", [Custom RTC restore date, default: 2000-01-01 00:00])], [
- 	rtc_date=""])
- 
- AS_IF([test "x$rtc_file" != "xno"], [
-diff --git a/plugins/rtc.c b/plugins/rtc.c
-index 9b4eeae..a733f75 100644
--- a/plugins/rtc.c
-+++ b/plugins/rtc.c
-@@ -321,10 +321,12 @@ PLUGIN_INIT(plugin_init)
- {
- 	struct tm tm = { 0 };
- 
-	if (!strptime(rtc_timestamp, "%Y-%m-%d %H:%M", &tm))
-		rtc_date_fallback = mktime(&tm);
-	else
-+	if (!strptime(rtc_timestamp, RTC_FMT, &tm)) {
-+		logit(LOG_ERR, "Invalid restore date '%s', reverting to '%s'",
-+		      rtc_timestamp, RTC_TIMESTAMP_BEGIN_2000);
- 		rtc_timestamp = RTC_TIMESTAMP_BEGIN_2000;
-+	} else
-+		rtc_date_fallback = mktime(&tm);
- 
- 	uev_timer_init(ctx, &rtc_timer, update, NULL, RTC_PERIOD, RTC_PERIOD);
- 
-- 
-2.43.0
-
@@ -1,85 +0,0 @@
-From 49c0557cedd8d3c1a2f74d27fa7db83dd529914a Mon Sep 17 00:00:00 2001
-From: Joachim Wiberg <troglobit@gmail.com>
-Date: Sun, 3 Nov 2024 20:49:04 +0100
-Subject: [PATCH 6/6] plugins: reduce log level LOG_ERR -> LOG_WARNING
-Organization: Addiva Elektronik
-
-These plugins signal success and failure directly to the console, the
-user should inspect syslog for more information.
-
-This change is a follow-up to 340cae4, where kernel logs of LOG_ERR and
-higher are allowed to log directly to the console.  Since syslogd has
-not been started before these plugins, the log messages would otherwise
-leak to the console.
-
-Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
---
- plugins/rtc.c     | 14 +++++++-------
- plugins/urandom.c |  2 +-
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
-diff --git a/plugins/rtc.c b/plugins/rtc.c
-index a733f75..96203a0 100644
--- a/plugins/rtc.c
-+++ b/plugins/rtc.c
-@@ -147,7 +147,7 @@ static void file_save(void *arg)
- 	}
- 
- 	if ((rc = time_get(&tm))) {
-		logit(LOG_ERR, "System clock invalid, before %s, not saving", rtc_timestamp);
-+		logit(LOG_WARNING, "System clock invalid, before %s, not saving", rtc_timestamp);
- 		print_desc(NULL, "System clock invalid, skipping");
- 	} else {
- 		char buf[32] = { 0 };
-@@ -238,7 +238,7 @@ static void rtc_save(void *arg)
- 	}
- 
- 	if (rc && errno == EINVAL) {
-		logit(LOG_ERR, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
-+		logit(LOG_WARNING, "System clock invalid, before %s, not saving to RTC", rtc_timestamp);
- 		rc = 2;
- 	}
- 
-@@ -275,13 +275,13 @@ static void rtc_restore(void *arg)
- 	}
- 
- 	if (rc) {
-		logit(LOG_ERR, "Failed restoring system clock from RTC.");
-+		logit(LOG_WARNING, "Failed restoring system clock from RTC.");
- 		if (EINVAL == errno)
-			logit(LOG_ERR, "RTC time is too old (before %s)", rtc_timestamp);
-+			logit(LOG_WARNING, "RTC time is too old (before %s)", rtc_timestamp);
- 		else if (ENOENT == errno)
-			logit(LOG_ERR, "RTC has no previously saved (valid) time.");
-+			logit(LOG_WARNING, "RTC has no previously saved (valid) time.");
- 		else
-			logit(LOG_ERR, "RTC error code %d: %s", errno, strerror(errno));
-+			logit(LOG_WARNING, "RTC error code %d: %s", errno, strerror(errno));
- 
- 		print(2, NULL);
- 
-@@ -322,7 +322,7 @@ PLUGIN_INIT(plugin_init)
- 	struct tm tm = { 0 };
- 
- 	if (!strptime(rtc_timestamp, RTC_FMT, &tm)) {
-		logit(LOG_ERR, "Invalid restore date '%s', reverting to '%s'",
-+		logit(LOG_WARNING, "Invalid restore date '%s', reverting to '%s'",
- 		      rtc_timestamp, RTC_TIMESTAMP_BEGIN_2000);
- 		rtc_timestamp = RTC_TIMESTAMP_BEGIN_2000;
- 	} else
-diff --git a/plugins/urandom.c b/plugins/urandom.c
-index b9f6039..6f82779 100644
--- a/plugins/urandom.c
-+++ b/plugins/urandom.c
-@@ -154,7 +154,7 @@ static void setup(void *arg)
- 	close(fd);
- 	free(rpi);
- 	if (rc < 0)
-		logit(LOG_ERR, "Failed adding entropy to kernel random pool: %s", strerror(err));
-+		logit(LOG_WARNING, "Failed adding entropy to kernel random pool: %s", strerror(err));
- 	print_result(rc < 0);
- 	return;
- fallback:
-- 
-2.43.0
-
@@ -1,5 +1,5 @@
 # From https://github.com/troglobit/finit/releases/
-sha256  5026965e33f31b8fa4e2e465b9521e805fa01c31cade884c07d0fcff97cd0ddf  finit-4.8.tar.gz
+sha256  7e49a3df58c5aedfff9537b7ff34b9238fc28b523d4dbacc316d606c7af5e335  finit-4.11.tar.gz

 # Locally calculated
 sha256  2fd62c0fe6ea6d1861669f4c87bda83a0b5ceca64f4baa4d16dd078fbd218c14  LICENSE
@@ -4,7 +4,7 @@
 #
 ################################################################################

-FINIT_VERSION = 4.8
+FINIT_VERSION = 4.11
 FINIT_SITE = https://github.com/troglobit/finit/releases/download/$(FINIT_VERSION)
 FINIT_LICENSE = MIT
 FINIT_LICENSE_FILES = LICENSE
@@ -1,3 +1,3 @@
 # Locally calculated
 sha256  9d9d33b873917ca5d0bdcc47a36d2fd385971ab0c045d1472fcadf95ee5bcf5b  LICENCE
-sha256  b579d0028c8c88ddea27282f03c8c23fa9a758ad47918aeffb048456cf204375  klish-plugin-sysrepo-b693714a1ff5f8021651d7619556afb19945e5e6-br1.tar.gz
+sha256  598089ad964594bbbaf2b7d7214d8761c828174eef53b7cfb1cd98517f407d01  klish-plugin-sysrepo-b693714a1ff5f8021651d7619556afb19945e5e6-git4.tar.gz
@@ -1,3 +1,3 @@
 # Locally calculated
 sha256  9d9d33b873917ca5d0bdcc47a36d2fd385971ab0c045d1472fcadf95ee5bcf5b  LICENCE
-sha256  0305355dd29dc276f7957d51e2406907e0c862dfd46f496c8a921df4f3d72a8d  klish-019ebd2704e322b5d500f5687d526431e535eec8-br1.tar.gz
+sha256  79c9b16b227320fea358114738933ea25be33f8f263d3eec1f83fb603c0c0b22  klish-019ebd2704e322b5d500f5687d526431e535eec8-git4.tar.gz
--- a/Show More
+++ b/Show More