Minor changes in changelog

This fix #1015

.github/CHECKLIST.md

@@ -3,39 +3,34 @@ Checklists for Pull Requests and Releases
 
 Maintainer checklists for reviewing pull requests and doing releases.
 
+
 Pull Requests
 -------------
 
-- If applicable, is there a readable ChangeLog entry?
-- If any LICENSE file has been updated, has the `.hash` file been updated?
-- If any change to a Finit `.svc` file, does any run/task linger?  
-  I.e., is there a runlevel and/or condition defined to prevent them
-  from running outside of their intended runlevel?
-- If any change to grub or qemu/qeneth setup, has it been tested in GNS3?
-  - If any change to u-boot/buildroot, has it been tested with `<booloader>_defconfig`
-- If any change to logging, have the resulting logs been audited?
-  - Check for duplicate entries, misspellings
-  - Check for sneaky severity changes, e.g., error vs note, error vs warning
-- If new subsystem, or major changes to a subsystem, have the docs been updated?
-- If change to mDNS, has it been tested with netbrowse?
-- If change to `_defconfig`, verify `local.mk` and sync with other archs
-  - Test manually as well, e.g., CLI changes do not have ha regression tests
-  - Build from distclean, or use artifacts built by build servers, for manual tests
+ - If applicable, is there a readable ChangeLog entry?
+ - If any LICENSE file has been updated, has the `.hash` file been updated?
+ - If any change to a Finit `.svc` file, does any run/task linger?  
+   I.e., is there a runlevel and/or condition defined to prevent them
+   from running outside of their intended runlevel?
+ - If any change to grub or qemu/qeneth setup, has it been tested in GNS3?
+   - If any change to u-boot/buildroot, has it been tested with `<booloader>_defconfig`
+ - If any change to logging, have the resulting logs been audited?
+   - Check for duplicate entries, misspellings
+   - Check for sneaky severity changes, e.g., error vs note, error vs warning
+ - If new subsystem, or major changes to a subsystem, have the docs been updated?
+ - If change to mDNS, has it been tested with netbrowse?
+ - If change to `_defconfig`, verify `local.mk` and sync with other archs
+   - Test manually as well, e.g., CLI changes do not have ha regression tests
+   - Build from distclean, or use artifacts built by build servers, for manual tests
+
 
 Releases
 --------
 
-Recommended checkpoints, use at your own discretion:
-
-- Make at least one -betaN release to verify the GitHub workflow well in time release day
-  - Stuff happens, remember kernelkit/infix#735
-- Make at least one -rcN to flush out any issues in customer repos
-  - Easy to forget adaptations/hacks in customer repos -- may need Infix change/support
-- Verify release artifacts (checksums, completeness, no corrupted files)
-- Test on actual hardware for at least one architecture
-- Review ChangeLog for completeness
-- Check for release-blocking issues
-- Verify generated GNS3 appliance, no marketplace update on -rc builds
-- Ensure the markdown link for the release diff is updated
-- Ensure subrepos are tagged (can be automated, see kernelkit/infix#393)
-- Sync tags for all repo. sync activities
+ - Make at least one -betaN release to verify the GitHub workflow well in time release day
+   - Stuff happens, remember kernelkit/infix#735
+ - Make at least one -rcN to flush out any issues in customer repos
+   - Easy to forget adaptations/hacks in customer repos -- may need Infix change/support
+ - Ensure the markdown link for the release diff is updated
+ - Ensure subrepos are tagged (can be automated, see kernelkit/infix#393)
+ - Sync tags for all repo. sync activities

.github/CONTRIBUTING.md

@@ -9,15 +9,15 @@ forms of collaboration as well.  [Let's talk!][support] :handshake:
 
 If you are unsure how to start implementing an idea or fix:
 
-- :bug: open an issue, there are human friendly templates for _bugs_
-  and _feature requests_ at <https://github.com/kernelkit/infix/issues>
-- :speech_balloon: use the [Q&A Forum][discuss]
-- :technologist: The [Developer's Guide][devguide] is also a useful start
+ - :bug: open an issue, there are human friendly templates for _bugs_
+   and _feature requests_ at <https://github.com/kernelkit/infix/issues>
+ - :speech_balloon: use the [Q&A Forum][discuss]
+ - :technologist: The [Developer's Guide][devguide] is also a useful start
 
-> [!IMPORTANT]
-> Talking about code and problems first is often the best way to get
+> _Talking about code and problems first is often the best way to get
 > started before submitting a pull request.  We have found it always
-> saves time, yours and ours.
+> saves time, yours and ours._
+
 
 :sparkles: General Guidelines
 -----------------------------
@@ -27,20 +27,21 @@ version the change is made against, what it does, and, more importantly
 *why* -- from your perspective, why is it a bug, why does the code need
 changing in this way.  Start with why.
 
-- :bug: Bug reports need metadata like Infix version or commit hash
-- :adhesive_bandage: Bug fixes also need version, and (preferably) a
-  corresponding issue number for the ChangeLog
-- :new: New features, you need to get approval of the YANG model first!  
-  :speech_balloon: Please use the [Forum][discuss], e.g., category:
-  *Ideas*, or open a :pray: feature request issue
-- :white_check_mark: New features also need new regression tests, this
-  can be basic tests or more complex use-case tests comprising multiple
-  subsystems, see [Testing Changes](#test_tube-testing-changes), below
+ - :bug: Bug reports need metadata like Infix version or commit hash
+ - :adhesive_bandage: Bug fixes also need version, and (preferably) a
+   corresponding issue number for the ChangeLog
+ - :new: New features, you need to get approval of the YANG model first!  
+   :speech_balloon: Please use the [Forum][discuss], e.g., category:
+   *Ideas*, or open a :pray: feature request issue
+ - :white_check_mark: New features also need new regression tests, this
+   can be basic tests or more complex use-case tests comprising multiple
+   subsystems, see [Testing Changes](#test_tube-testing-changes), below
 
 Please take care to ensure you follow the project coding style and the
 commit message format.  If you follow these recommendations you help
 the maintainers and make it easier for them to include your code.
 
+
 :woman_technologist: Coding Style
 ---------------------------------
 
@@ -50,40 +51,39 @@ and it is expected that you provide a human-readable summary for the
 release notes (ChangeLog) and at least a configuration example in the
 manual for new features.
 
-> [!TIP]
-> Consider ["Readme driven development"][RDD] for new features.  It is
-> amazing how many flaws in your own bright ideas come to bare when you
-> suddenly have to explain them to someone else!
+> **Tip:** consider ["Readme driven development"][RDD] for new features.
+> It is amazing how many flaws in your own bright ideas come to bare
+> when you suddenly have to explain them to someone else!
 
 We expect code contributions for:
 
-- C code in [Linux Coding Style][Linux]
-- Python code should follow [PEP-8][]
+ - C code in [Linux Coding Style][Linux]
+ - Python code should follow [PEP-8][]
 
-> [!IMPORTANT]
 > **However,** always submit code that follows the style of surrounding
 > code!  Legacy takes precedence, and remember, we read code a lot more
 > than write it, so legibility is important.
 
 The ChangeLog deserves a separate mention:
 
-- Releases are listed in reverse chronological order order, so the
-  latest/next release is at the beginning of the file
-- Only *user-facing bugs and features* are detailed, so code refactor,
-  new tests, etc. are not listed.
-- Add your changes/features to the Changes section
-- Add your Fix line in the Fixes section, in numeric order
-- Changes and fixes without an issue number are listed after all
-  numbered ones
-- YANG model changes are documented in their respective model, for
-  standard models, e.g., for `ietf-interfaces.yang`, the corresponding
-  `infix-interfaces.yang` detail augments/deviations as revisions.
+ - Releases are listed in reverse chronological order order, so the
+   latest/next release is at the beginning of the file
+ - Only *user-facing bugs and features* are detailed, so code refactor,
+   new tests, etc. are not listed.
+ - Add your changes/features to the Changes section
+ - Add your Fix line in the Fixes section, in numeric order 
+ - Changes and fixes without an issue number are listed after all
+   numbered ones
+ - YANG model changes are documented in their respective model, for
+   standard models, e.g., for `ietf-interfaces.yang`, the corresponding
+   `infix-interfaces.yang` detail augments/deviations as revisions.
 
 A final note, lines of code are allowed to be longer than 72 characters
 these days, unless you live by PEP-8 (see above).  There is no enforced
 maximum, but the team usually keep it around 100 characters for both C
 and Python.
 
+
 :test_tube: Testing Changes
 ---------------------------
 
@@ -97,8 +97,9 @@ the same pull request.
 
 For help getting started with testing, see the following resources:
 
-- [Developer's Guide][devguide]
-- [Regression Testing][testing]
+ - [Developer's Guide][devguide]
+ - [Regression Testing][testing]
+
 
 :memo: Commit Messages
 ----------------------
@@ -109,135 +110,45 @@ proud of your work and set up a proper GIT identity for your commits:
 
 <img src="../doc/jack.png" width=70 align="right">
 
-```bash
-$ git config --global user.name "Jacky Linker"
-$ git config --global user.email jacky.linker@example.com
-```
+    $ git config --global user.name "Jacky Linker"
+    $ git config --global user.email jacky.linker@example.com
 
 Example commit message from one of many [online guides][cbeams].  Use
 `git commit -s` to automatically add a `Signed-off-by` for proof of
 origin, see [DCO][] for more info.
 
-```text
-subsystem: brief, but clear and concise summary of changes
+    subsystem: brief, but clear and concise summary of changes
+    
+    More detailed explanatory text, if necessary.  Wrap it to about 72
+    characters or so.  In some contexts, the first line is treated as
+    the subject of an email and the rest of the text as the body.  The
+    empty line separating summary from body is critical.  Tools like
+    rebase can get confused if the empty line is missing.
+    
+    Further paragraphs should be separated with empty lines.
+    
+     - Bullet points are okay, too
+    
+     - Typically a hyphen or asterisk is used for the bullet, preceded
+       by a single space, with blank lines in between, but conventions
+       vary here
 
-More detailed explanatory text, if necessary.  Wrap it to about 72
-characters or so.  In some contexts, the first line is treated as
-the subject of an email and the rest of the text as the body.  The
-empty line separating summary from body is critical.  Tools like
-rebase can get confused if the empty line is missing.
+	If you use an issue tracker, put references to them at the bottom,
+	like this:
 
-Further paragraphs should be separated with empty lines.
+	Resolves: #123
+	See also: #456, #789
 
- - Bullet points are okay, too
-
- - Typically a hyphen or asterisk is used for the bullet, preceded
-   by a single space, with blank lines in between, but conventions
-   vary here
-
-If you use an issue tracker, put references to them at the bottom,
-like this:
-
-Resolves: #123
-See also: #456, #789
-
-Signed-off-by: Jacky Linker <jacky.linker@example.com>
-```
+    Signed-off-by: Jacky Linker <jacky.linker@example.com>
 
 This is an example of how to [automatically close][closing] an issue
 when the commit is merged to mainline.  Several keywords are available.
 
-:lock_with_ink_pen: Signing Commits with GPG
----------------------------------------------
-
-To ensure the authenticity and integrity of your contributions, we
-**require** all commits to be signed with GPG.  This cryptographically
-verifies that commits come from a trusted source.
-
-### Generating a GPG Key
-
-If you don't already have a GPG key, generate one:
-
-```bash
-$ gpg --full-generate-key
-```
-
-When prompted, choose:
-- Key type: `RSA and RSA` (default)
-- Key size: `4096` bits (recommended for security)
-- Expiration: `0` (key does not expire)
-- Real name and email: Use the same email as your Git configuration
-
-> [!NOTE]
-> We recommend keys that do not expire for signing commits.  Expiration
-> creates a "usability time bomb" without providing meaningful security
-> benefits for code signing.  See [this article][pgpfan] for details.
-
-### Configuring Git to Sign Commits
-
-First, find your GPG key ID:
-
-```bash
-$ gpg --list-secret-keys --keyid-format=long
-```
-
-Look for the line starting with `sec`, the key ID is the part after the `/`.
-For example, in `sec   rsa4096/ABCD1234EFGH5678`, the key ID is `ABCD1234EFGH5678`.
-
-Configure Git to use your GPG key:
-
-```bash
-$ git config --global user.signingkey ABCD1234EFGH5678
-$ git config --global commit.gpgsign true
-```
-
-The second command enables automatic signing for all commits.  Alternatively,
-you can sign individual commits with `git commit -S`.
-
-### Publishing Your Public Key
-
-To allow others to verify your signatures, publish your public key to a
-keyserver:
-
-```bash
-$ gpg --keyserver hkps://keys.openpgp.org --send-keys ABCD1234EFGH5678
-```
-
-> [!IMPORTANT]
-> The keyserver will send a verification email to the address associated
-> with your key.  You **must** click the link in that email to confirm
-> ownership before your key becomes searchable by email address.
-
-Alternative keyservers you can use:
-- `hkps://keyserver.ubuntu.com`
-- `hkps://pgp.mit.edu`
-
-### Adding Your GPG Key to GitHub
-
-For GitHub to show your commits as "Verified", you need to add your public
-key to your account:
-
-1. Export your public key:
-   ```bash
-   $ gpg --armor --export ABCD1234EFGH5678
-   ```
-
-2. Copy the entire output, including the `-----BEGIN PGP PUBLIC KEY BLOCK-----`
-   and `-----END PGP PUBLIC KEY BLOCK-----` lines.
-
-3. Go to [GitHub Settings → SSH and GPG keys](https://github.com/settings/keys)
-
-4. Click **New GPG key** and paste your public key.
-
-Now your signed commits will display a "Verified" badge on GitHub! :white_check_mark:
-
-For more details, see GitHub's [official documentation on commit signature verification][gpg-verify].
 
 :twisted_rightwards_arrows: Pull Requests
 -----------------------------------------
 
-> [!NOTE]
-> _The git repository is the canonical location for all information._
+> _The git repository is the canonical location for information._
 
 A pull request should preferably address a single issue or change.  This
 may of course include multiple related changes, but what is important to
@@ -256,6 +167,7 @@ Buildroot, consider the pull request message body similar to the cover
 letter for a series of patches -- it's a summary of changes, and it is
 lost when the changes are merged to the mainline branch.
 
+
 :balance_scale: Code of Conduct
 -------------------------------
 
@@ -272,8 +184,6 @@ other contributions that are not aligned to this Code of Conduct."*
 [PEP-8]:    https://peps.python.org/pep-0008/
 [RDD]:      https://tom.preston-werner.com/2010/08/23/readme-driven-development
 [cbeams]:   https://cbea.ms/git-commit/#seven-rules
-[conduct]:    CODE-OF-CONDUCT.md
-[DCO]:        https://developercertificate.org/
-[closing]:    https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests
-[gpg-verify]: https://docs.github.com/en/authentication/managing-commit-signature-verification
-[pgpfan]:     https://articles.59.ca/doku.php?id=pgpfan:expire
+[conduct]:  CODE-OF-CONDUCT.md
+[DCO]:      https://developercertificate.org/
+[closing]:  https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests

.github/SUPPORT.md

@@ -1,10 +1,8 @@
 Limited free support is only available using the online resources of the
-project on GitHub, and Discord, see <https://github.com/kernelkit/infix>:
+project on GitHub, and Discord, see <https://github.com/kernelkit>:
 
-&nbsp;&nbsp; :house: <https://www.kernelkit.org> — home page, blog, news, howto's and tutorials  
-&nbsp;&nbsp; :package: <https://github.com/kernelkit/infix/releases/latest> — latest release  
 &nbsp;&nbsp; :speech_balloon: <https://github.com/orgs/kernelkit/discussions>  
-&nbsp;&nbsp; :bug: <https://github.com/kernelkit/infix/issues>  
+&nbsp;&nbsp; :bug: <https://github.com/kernelkit/infix/issues>
 
 Support contracts, development of new features, fast-tracking of reviews
 and contributions, customer branding of Infix, and even customer specific

.github/workflows/bitsign.yml

@@ -1,215 +0,0 @@
-name: bitSign Infix Release
-
-on:
-  workflow_dispatch:
-    inputs:
-      release_version:
-        description: 'Release version (e.g., v25.08.0)'
-        required: true
-        type: string
-  push:
-    branches: [ sign-with-bitsign ]
-
-jobs:
-  sign-infix-release:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v6
-
-    - name: Validate release version format
-      id: validate
-      run: |
-        # Use default version for push events, input version for manual dispatch
-        if [ "${{ github.event_name }}" = "push" ]; then
-          VERSION="v25.08.0"
-          echo "Using default version for push trigger: $VERSION"
-        else
-          VERSION="${{ inputs.release_version }}"
-          echo "Using input version for manual trigger: $VERSION"
-        fi
-
-        # Check if version starts with 'v' and has proper format
-        if ! echo "$VERSION" | grep -qE '^v[0-9]+\.[0-9]+(\.[0-9]+)?(-alpha[0-9]*|-beta[0-9]*|-rc[0-9]*)?$'; then
-          echo "❌ Invalid version format. Expected format: vYY.MM(.PP)(-alphaN|-betaN|-rcN)"
-          echo "Examples: v25.08.0, v25.08.0-alpha1, v25.08.0-rc1"
-          exit 1
-        fi
-
-        # Extract version without 'v' prefix for filename
-        FILE_VERSION="${VERSION#v}"
-        FILENAME="infix-x86_64-${FILE_VERSION}.tar.gz"
-        RELEASE_URL="https://github.com/kernelkit/infix/releases/download/${VERSION}/${FILENAME}"
-
-        echo "✅ Version format valid"
-        echo "file_version=${FILE_VERSION}" >> $GITHUB_OUTPUT
-        echo "filename=${FILENAME}" >> $GITHUB_OUTPUT
-        echo "release_url=${RELEASE_URL}" >> $GITHUB_OUTPUT
-
-    - name: Download Infix release
-      run: |
-        RELEASE_URL="${{ steps.validate.outputs.release_url }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-
-        echo "Downloading Infix release: $FILENAME"
-        echo "From: $RELEASE_URL"
-
-        if ! curl -L "$RELEASE_URL" -o "$FILENAME" --fail --show-error --progress-bar; then
-          echo "❌ Failed to download release file from: $RELEASE_URL"
-          echo "Please verify that the release version exists and contains the x86_64 build."
-          echo "You can check available releases at: https://github.com/kernelkit/infix/releases"
-          exit 1
-        fi
-
-        # Verify download
-        if [ -f "$FILENAME" ] && [ -s "$FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$FILENAME" | awk '{print $5}')
-          echo "✅ Successfully downloaded: $FILENAME ($FILE_SIZE)"
-        else
-          echo "❌ Failed to download release file"
-          exit 1
-        fi
-
-    - name: Create signing request
-      id: create_request
-      run: |
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        RELEASE="infix-x86_64-${FILE_VERSION}"
-
-        echo "Creating signing request for $FILENAME..."
-        echo "RELEASE parameter: $RELEASE"
-
-        # Create signing request using bitSign API
-        RESPONSE=$(curl -s -X POST "https://portal.bitsign.se/api/v1/requests" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -F "file=@$FILENAME" \
-          -F "key=bit42-Demo1" \
-          -F "job=Infix-x86" \
-          -F "parameters={\"RELEASE\": \"$RELEASE\"}")
-
-        echo "API Response: $RESPONSE"
-
-        # Check if request was successful
-        if echo "$RESPONSE" | jq -e '.success == true' > /dev/null; then
-          REQUEST_ID=$(echo "$RESPONSE" | jq -r '.requestId')
-          echo "✅ Request created successfully with ID: $REQUEST_ID"
-          echo "request_id=$REQUEST_ID" >> $GITHUB_OUTPUT
-        else
-          echo "❌ Failed to create signing request"
-          echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-          exit 1
-        fi
-
-    - name: Wait for signing completion
-      id: wait_completion
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        echo "Waiting for signing completion for request: $REQUEST_ID"
-
-        # Poll status for up to 10 minutes (600 seconds) - longer timeout for larger files
-        MAX_WAIT=600
-        WAITED=0
-
-        while [ $WAITED -lt $MAX_WAIT ]; do
-          RESPONSE=$(curl -s -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/status" \
-            -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}")
-
-          STATUS=$(echo "$RESPONSE" | jq -r '.status')
-          echo "Current status: $STATUS (waited ${WAITED}s)"
-
-          if [ "$STATUS" = "completed" ]; then
-            echo "✅ Signing completed successfully!"
-            break
-          elif [ "$STATUS" = "failed" ]; then
-            echo "❌ Signing failed"
-            echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-            exit 1
-          fi
-
-          sleep 10
-          WAITED=$((WAITED + 10))
-        done
-
-        if [ $WAITED -ge $MAX_WAIT ]; then
-          echo "❌ Timeout: Signing did not complete within ${MAX_WAIT} seconds"
-          exit 1
-        fi
-
-    - name: Download signed file
-      id: download_signed
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        SIGNED_FILENAME="infix-x86_64-${FILE_VERSION}-signed.tar.gz"
-
-        echo "Downloading signed file for request: $REQUEST_ID"
-        echo "Expected signed filename: $SIGNED_FILENAME"
-
-        # Download the signed file
-        curl -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/download" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -o "$SIGNED_FILENAME" \
-          --fail --show-error
-
-        if [ -f "$SIGNED_FILENAME" ] && [ -s "$SIGNED_FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$SIGNED_FILENAME" | awk '{print $5}')
-          echo "Successfully downloaded signed file: $SIGNED_FILENAME ($FILE_SIZE)"
-          echo "signed_filename=$SIGNED_FILENAME" >> $GITHUB_OUTPUT
-
-          # Calculate SHA256 checksums for both files
-          ORIGINAL_SHA256=$(sha256sum "$FILENAME" | cut -d' ' -f1)
-          SIGNED_SHA256=$(sha256sum "$SIGNED_FILENAME" | cut -d' ' -f1)
-          echo "original_sha256=$ORIGINAL_SHA256" >> $GITHUB_OUTPUT
-          echo "signed_sha256=$SIGNED_SHA256" >> $GITHUB_OUTPUT
-        else
-          echo "Failed to download signed file"
-          exit 1
-        fi
-
-    - name: Upload signed artifacts
-      uses: actions/upload-artifact@v7
-      with:
-        name: signed-infix-${{ steps.validate.outputs.file_version }}
-        path: ${{ steps.download_signed.outputs.signed_filename }}
-        retention-days: 90
-
-    - name: Summary
-      run: |
-        # Determine the actual version used (could be from push or input)
-        if [ "${{ github.event_name }}" = "push" ]; then
-          ACTUAL_VERSION="v25.08.0"
-        else
-          ACTUAL_VERSION="${{ inputs.release_version }}"
-        fi
-
-        cat >> $GITHUB_STEP_SUMMARY << EOF
-        # bitSign Infix Release Signing Complete
-
-        The Infix release has been successfully signed using the bitSign API.
-
-        ## Signing Details
-
-        | Property | Value |
-        |----------|-------|
-        | 📦 **Original File** | \`${{ steps.validate.outputs.filename }}\` (\`${{ steps.download_signed.outputs.original_sha256 }}\`) |
-        | ✍️ **Signed File** | \`${{ steps.download_signed.outputs.signed_filename }}\` (\`${{ steps.download_signed.outputs.signed_sha256 }}\`) |
-        | 🔑 **Signing Key** | \`bit42-Demo1\` |
-        | ⚙️ **Job Type** | \`Infix-x86\` |
-        | 🆔 **Request ID** | \`${{ steps.create_request.outputs.request_id }}\` |
-        | 📋 **Release Version** | \`\$ACTUAL_VERSION\` |
-        | 🌐 **API Endpoint** | \`portal.bitsign.se\` |
-
-        ## Download Files
-
-        > **The signed release file is available as a workflow artifact:**
-        > **\`signed-infix-${{ steps.validate.outputs.file_version }}\`**
-        >
-        > The artifact contains the signed file: \`${{ steps.download_signed.outputs.signed_filename }}\`
-
-        ---
-
-        **Next Steps:** The signed release can now be distributed with cryptographic verification of authenticity.
-        EOF

.github/workflows/build-boot.yml

@@ -1,140 +0,0 @@
-name: Build Bootloaders
-
-on:
-  workflow_dispatch:
-    inputs:
-      branch:
-        description: 'Branch to build from'
-        default: 'main'
-        type: string
-
-jobs:
-  build:
-    name: Build ${{ matrix.defconfig }}
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        defconfig:
-          - aarch64_qemu_boot
-          - bpi_r3_sd_boot
-          - bpi_r3_emmc_boot
-          - bpi_r4_sd_boot
-          - bpi_r4_emmc_boot
-          - bpi_r64_sd_boot
-          - bpi_r64_emmc_boot
-          - cn9130_crb_boot
-          - fireant_boot
-          - nanopi_r2s_boot
-          - rpi2_boot
-          - rpi64_boot
-          - sama7g54_ek_emmc_boot
-          - sama7g54_ek_sd_boot
-    env:
-      MAKEFLAGS: -j5
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v6
-        with:
-          ref: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.branch || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          defconfig=${{ matrix.defconfig }}
-          version=$(awk -F'"' '/BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE=/ {print $2}' configs/${defconfig}_defconfig)
-          version=${version:-git}
-          filename=$(echo "${defconfig}" | tr '_' '-')
-
-          # TODO: Replace hardcoded rev with actual revision stepping
-          rev="latest"
-
-          archive="${filename}-${version}-${rev}.tar.gz"
-          dirname="${filename}-${version}-${rev}"
-
-          echo "defconfig=${defconfig}" >> $GITHUB_OUTPUT
-          echo "version=${version}"     >> $GITHUB_OUTPUT
-          echo "rev=${rev}"             >> $GITHUB_OUTPUT
-          echo "archive=${archive}"     >> $GITHUB_OUTPUT
-          echo "dirname=${dirname}"     >> $GITHUB_OUTPUT
-
-          echo "Building ${defconfig}_defconfig, version ${version}-${rev}, artifact ${archive} ..."
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ matrix.defconfig }}
-          dl-prefix: dl-boot
-          ccache-prefix: ccache-boot
-
-      - name: Configure ${{ matrix.defconfig }}_defconfig
-        run: |
-          make ${{ matrix.defconfig }}_defconfig
-
-      - name: Build ${{ matrix.defconfig }}_defconfig
-        run: |
-          echo "Building ${{ matrix.defconfig }}_defconfig ..."
-          make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))
-
-      - name: Resulting size of build
-        run: |
-          printf "Size of output/images/: "
-          ls -l output/images/
-
-      - name: Prepare ${{ matrix.defconfig }} Artifact
-        run: |
-          cd output/
-          mv images ${{ steps.vars.outputs.dirname }}
-          tar cfz ${{ steps.vars.outputs.archive }} ${{ steps.vars.outputs.dirname }}/
-
-      - uses: actions/upload-artifact@v7
-        with:
-          path: output/${{ steps.vars.outputs.archive }}
-          name: artifact-${{ matrix.defconfig }}
-
-  publish:
-    name: Upload Bootloader Artifacts
-    runs-on: ubuntu-latest
-    needs: build
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v7
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Bootloader Build Complete! :rocket:
-
-          For the public download links of these bootloader artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest-boot>
-          EOF

.github/workflows/build-image.yml

@@ -1,272 +0,0 @@
-name: Create Images
-
-on:
-  workflow_dispatch:
-    inputs:
-      board:
-        description: 'Board to create image for'
-        type: choice
-        required: true
-        options:
-          - raspberrypi-rpi2
-          - raspberrypi-rpi64
-          - bananapi-bpi-r3
-          - bananapi-bpi-r4
-          - bananapi-bpi-r64
-          - friendlyarm-nanopi-r2s
-          - microchip-sama7g54-ek
-          - acer-connect-vero-w
-        default: 'raspberrypi-rpi64'
-
-jobs:
-  create-image:
-    name: Create images for ${{ inputs.board }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v6
-        with:
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            genimage \
-            u-boot-tools \
-            parted \
-            gdisk \
-            qemu-utils \
-            dosfstools \
-            e2fsprogs \
-            genext2fs \
-            mtools \
-            jq
-
-      - name: Prepare build environment
-        run: |
-          # Set up directory structure similar to buildroot build
-          mkdir -p output/images
-          mkdir -p build
-
-      - name: Set bootloaders and targets based on board
-        run: |
-          arch=
-          targets=
-          bootloader_sdcard=
-          bootloader_emmc=
-
-          case "${{ inputs.board }}" in
-            raspberrypi-rpi2)
-              arch=arm
-              targets="sdcard"
-              bootloader_sdcard=rpi2-boot
-              ;;
-            raspberrypi-rpi64)
-              arch=aarch64
-              targets="sdcard"
-              bootloader_sdcard=rpi64-boot
-              ;;
-            bananapi-bpi-r3)
-              arch=aarch64
-              targets="sdcard emmc"
-              bootloader_sdcard=bpi-r3-sd-boot
-              bootloader_emmc=bpi-r3-emmc-boot
-              ;;
-            bananapi-bpi-r4)
-              arch=aarch64
-              targets="sdcard emmc"
-              bootloader_sdcard=bpi-r4-sd-boot
-              bootloader_emmc=bpi-r4-emmc-boot
-              ;;
-            bananapi-bpi-r64)
-              arch=aarch64
-              targets="sdcard emmc"
-              bootloader_sdcard=bpi-r64-sd-boot
-              bootloader_emmc=bpi-r64-emmc-boot
-              ;;
-            acer-connect-vero-w)
-              arch=aarch64
-              targets="emmc"
-              bootloader_emmc=bpi-r3-emmc-boot
-              ;;
-            friendlyarm-nanopi-r2s)
-              arch=aarch64
-              targets="sdcard"
-              bootloader_sdcard=nanopi-r2s-boot
-              ;;
-            microchip-sama7g54-ek)
-              arch=arm
-              targets="sdcard emmc"
-              bootloader_sdcard=sama7g54-ek-sd-boot
-              bootloader_emmc=sama7g54-ek-emmc-boot
-              ;;
-            *)
-              echo "Error: Unknown board ${{ inputs.board }}"
-              exit 1
-              ;;
-          esac
-
-          echo "ARCH=$arch" >> $GITHUB_ENV
-          echo "TARGETS=$targets" >> $GITHUB_ENV
-          [ -n "$bootloader_sdcard" ] && echo "BOOTLOADER_SDCARD=$bootloader_sdcard" >> $GITHUB_ENV
-          [ -n "$bootloader_emmc" ] && echo "BOOTLOADER_EMMC=$bootloader_emmc" >> $GITHUB_ENV
-
-          echo "Arch: $arch for board: ${{ inputs.board }}"
-          echo "Targets: $targets"
-          [ -n "$bootloader_sdcard" ] && echo "SD bootloader: $bootloader_sdcard"
-          [ -n "$bootloader_emmc" ] && echo "eMMC bootloader: $bootloader_emmc"
-
-      - name: Download bootloader artifacts
-        run: |
-          for target in $TARGETS; do
-            upper=$(printf '%s' "$target" | tr '[:lower:]' '[:upper:]')
-            bootloader_var="BOOTLOADER_${upper}"
-            bootloader="${!bootloader_var}"
-            temp_dir="temp_bootloader_${target}"
-            out_dir="output_${target}/images"
-
-            echo "Downloading ${target} bootloader: ${bootloader}"
-            mkdir -p "$out_dir"
-            gh release download latest-boot --pattern "*${bootloader}*" --dir "$temp_dir/"
-            tar -xzf "$temp_dir"/*.tar.gz --strip-components=1 -C "$out_dir/"
-            rm -rf "$temp_dir"
-
-            echo "${target} bootloader files:"
-            ls -la "$out_dir/"
-          done
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Download Infix artifacts
-        run: |
-          gh run list --workflow=164295764 --branch=main --limit=1 --status=success --json databaseId --jq '.[0].databaseId' > latest_infix_run_id
-          INFIX_RUN_ID=$(cat latest_infix_run_id)
-
-          gh run download ${INFIX_RUN_ID} --name artifact-${ARCH} --dir temp_infix/
-
-          for target in $TARGETS; do
-            out_dir="output_${target}/images"
-            mkdir -p "$out_dir"
-            tar -xzf temp_infix/*.tar.gz --strip-components=1 -C "$out_dir/"
-
-            echo "Infix files extracted to ${out_dir}:"
-            ls -la "$out_dir/"
-          done
-
-          rm -rf temp_infix/
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Verify extracted files
-        run: |
-          for target in $TARGETS; do
-            echo "Files available for ${target} image:"
-            ls -la "output_${target}/images/"
-            echo ""
-          done
-
-      - name: Create images
-        run: |
-          export BUILD_DIR=$PWD/build
-          export BR2_EXTERNAL_INFIX_PATH=$PWD
-          export RELEASE=""
-          export INFIX_ID="infix"
-
-          for target in $TARGETS; do
-            export BINARIES_DIR=$PWD/output_${target}/images
-            ./utils/mkimage.sh -t "$target" ${{ inputs.board }}
-          done
-
-      - name: Verify created images
-        run: |
-          mkdir -p output/images
-
-          for target in $TARGETS; do
-            src_dir="output_${target}/images"
-            found=false
-
-            echo "${target} image:"
-            ls -lh "$src_dir"/*-"$target".img* 2>/dev/null || true
-
-            for img in "$src_dir"/*-"$target".img; do
-              [ -e "$img" ] || continue
-              found=true
-              echo "- $(basename "$img")"
-              file "$img"
-              fdisk -l "$img" 2>/dev/null || true
-            done
-
-            if [ "$found" = false ]; then
-              echo "No ${target} image found matching pattern: *-${target}.img"
-              echo "Available files in ${src_dir}:"
-              ls -la "$src_dir/"
-              exit 1
-            fi
-
-            for artifact in "$src_dir"/*-"$target".img*; do
-              [ -e "$artifact" ] || continue
-              cp "$artifact" output/images/
-            done
-
-            echo ""
-          done
-
-      - name: Upload images as artifacts
-        uses: actions/upload-artifact@v7
-        with:
-          name: images-${{ inputs.board }}
-          path: |
-            output/images/*-sdcard.img*
-            output/images/*-emmc.img*
-          retention-days: 30
-
-      - name: Create checksums
-        run: |
-          cd output/images/
-          for file in *-sdcard.img *-emmc.img; do
-            if [ -f "$file" ]; then
-              sha256sum "$file" > "$file.sha256"
-            fi
-          done
-
-      - name: Upload to release
-        uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "output/images/*-sdcard.img*,output/images/*-emmc.img*"
-
-      - name: Generate summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Arch:** ${{ env.ARCH }}
-          **Targets:** ${{ env.TARGETS }}
-          **Bootloader Source:** latest-boot release
-          **Infix Source:** Latest workflow run on main
-
-          ## Bootloaders
-          $(for target in $TARGETS; do
-              case "$target" in
-                sdcard) bootloader="$BOOTLOADER_SDCARD" ;;
-                emmc) bootloader="$BOOTLOADER_EMMC" ;;
-              esac
-              printf -- '- %s: %s\n' "$target" "$bootloader"
-            done)
-
-          ## Created Images
-          $(find output/images/ -name "*.img" -o -name "*.img.bmap" | xargs ls -lh 2>/dev/null | awk '{print "- " $9 " (" $5 ")"}' || echo "- No images found")
-
-          ## Download
-          The generated images are available as workflow artifacts above and in the latest-boot release.
-          EOF

.github/workflows/build-release.yml

@@ -1,97 +0,0 @@
-# Needed for make pkg-stats
-# sudo apt install python3-aiohttp
----
-name: Build Release
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      use_cache:
-        required: false
-        type: boolean
-        default: true
-
-jobs:
-  build:
-    name: Build Infix ${{ inputs.version }} [${{ matrix.target }}]
-    runs-on: [self-hosted, release]
-    strategy:
-      matrix:
-        target: [aarch64, arm, x86_64]
-      fail-fast: false
-    steps:
-      - uses: actions/checkout@v6
-        with:
-          clean: true
-          submodules: recursive
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Set Release Variables
-        id: vars
-        run: |
-          ver=${{ inputs.version }}
-          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          fver=${ver#v}
-          target=${{ matrix.target }}-${fver}
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ matrix.target }}
-          enabled: ${{ inputs.use_cache }}
-
-      - name: Configure & Build
-        env:
-          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
-        run: |
-          target=${{ matrix.target }}_defconfig
-          echo "Building $target ..."
-          make $target
-          make
-
-      - name: Generate SBOM from Build
-        run: |
-          # Generate manifest files in CSV format for CycloneDX
-          make legal-info
-          # Generate cpe.json for CycloneDX
-          make -s show-info > output/cpe.json
-          # Generate pkg-stats.{json,html} for humans
-          make pkg-stats
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Prepare Artifacts
-        run: |
-          cd output/
-
-          # Collect relevant files for SBOM and CPE info. for more info, see:
-          # https://github.com/CycloneDX/cyclonedx-buildroot
-          mkdir               images/sbom
-          mv pkg-stats.*      images/sbom/
-          mv cpe.json         images/sbom/
-          mv legal-info/*.csv images/sbom/
-
-          # Remove rootfs.squashfs from release (can be extracted from rootfs.itb)
-          # Saves ~131MB per architecture. See issue #858
-          rm -f images/rootfs.squashfs
-
-          mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
-      - uses: actions/upload-artifact@v7
-        with:
-          name: artifact-${{ matrix.target }}
-          path: output/*.tar.gz
-
-      - uses: actions/upload-artifact@v7
-        with:
-          name: artifact-disk-image-${{ matrix.target }}
-          path: output/images/*.qcow2

.github/workflows/build.yml

@@ -1,73 +1,26 @@
-name: Build
+name: Bob the Builder
 
 on:
+  pull_request:
+    types: [opened, synchronize, reopened, labeled]
+  push:
+    branches:
+      - main
   workflow_dispatch:
     inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
+      minimal:
+        description: 'Build minimal defconfigs'
+        required: false
         default: true
         type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
 
 jobs:
   build:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
+    name: Build Infix ${{ matrix.target }}
     runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
     strategy:
+      matrix:
+        target: [aarch64, x86_64]
       fail-fast: false
     outputs:
       build_id: ${{ steps.vars.outputs.INFIX_BUILD_ID }}
@@ -79,26 +32,11 @@ jobs:
           rm -rf ./.??* || true
           ls -la ./
 
-      - name: Checkout infix repo
-        uses: actions/checkout@v6
+      - uses: actions/checkout@v4
         with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
           clean: true
           fetch-depth: 0
           submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
 
       - name: Set Build Variables
         id: vars
@@ -113,44 +51,55 @@ jobs:
                   "${{ github.event.number }}" "${{ github.event.pull_request.head.sha }}" \
                   | tee -a $GITHUB_OUTPUT $GITHUB_ENV
           fi
-
-          target=${{ env.TARGET }}
-          name=${{ env.NAME }}
-          echo "dir=${name}-${target}"        >> $GITHUB_OUTPUT
-          echo "tgz=${name}-${target}.tar.gz" >> $GITHUB_OUTPUT
-          echo "Building target ${target}_defconfig"
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Prepare parallel build
-        id: parallel
-        run: |
-
-          if [ "$PARALLEL" == "true" ]; then
-             echo "BR2_PER_PACKAGE_DIRECTORIES=y" >> output/.config
-             MAKE="make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
-             echo "Building in parallel with -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
+          if [ "${{ github.event_name }}" == "workflow_dispatch" ]; then
+              if [ "${{ github.event.inputs.minimal }}" == "true" ]; then
+                  flavor="_minimal"
+              fi
           else
-             echo "Disabling parallel build"
-             MAKE="make"
+              # Ensure 'release' job get the proper image when building main
+              if [ "$GITHUB_REF_NAME" != "main" ]; then
+                  flavor="_minimal"
+              else
+                  flavor=""
+              fi
+              if ${{ contains(github.event.pull_request.labels.*.name, 'ci:main') }}; then
+                  flavor=""
+              fi
           fi
-          echo "MAKE=$MAKE" >> $GITHUB_OUTPUT
+          target=${{ matrix.target }}
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
+          echo "flv=$flavor"              >> $GITHUB_OUTPUT
+          echo "Building target ${target}${flavor}_defconfig"
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-
 
-      - name: Build ${{ env.TARGET }}
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-${{ matrix.target }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.target }}-
+            ccache-
+
+      - name: Configure ${{ matrix.target }}${{ steps.vars.outputs.flv }}
         run: |
-          echo "Building ${{ env.TARGET }}_defconfig ..."
-          eval "${{ steps.parallel.outputs.MAKE }}"
+          make ${{ matrix.target }}${{ steps.vars.outputs.flv }}_defconfig
+
+      - name: Unit Test ${{ matrix.target }}
+        run: |
+          make test-unit
+
+      - name: Build ${{ matrix.target }}${{ steps.vars.outputs.flv }}
+        run: |
+          echo "Building ${{ matrix.target }}${{ steps.vars.outputs.flv }}_defconfig ..."
+          make
 
       - name:  Check SBOM from Build
         run: |
@@ -171,14 +120,121 @@ jobs:
           printf "Size of output/images/: "
           ls -l output/images/
 
-      - name: Prepare ${{ env.TARGET }} Artifact
+      - name: Prepare ${{ matrix.target }} Artifact
         run: |
           cd output/
           mv images ${{ steps.vars.outputs.dir }}
           ln -s ${{ steps.vars.outputs.dir }} images
           tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
 
-      - uses: actions/upload-artifact@v7
+      - uses: actions/upload-artifact@v4
         with:
           path: output/${{ steps.vars.outputs.tgz }}
-          name: artifact-${{ env.TARGET }}
+          name: artifact-${{ matrix.target }}
+
+  test:
+    name: Regression Test of Infix x86_64
+    needs: build
+    runs-on: [ self-hosted, regression ]
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          clean: true
+          submodules: recursive
+
+      - name: Set Build Variables
+        id: vars
+        run: |
+          if [ -n "${{ needs.build.outputs.build_id }}" ]; then
+              echo "INFIX_BUILD_ID=${{ needs.build.outputs.build_id }}" \
+                   >>$GITHUB_ENV
+          fi
+
+          if [ "$GITHUB_REF_NAME" != "main" ]; then
+              flavor="_minimal"
+          else
+              flavor=""
+          fi
+          echo "flv=$flavor"              >> $GITHUB_OUTPUT
+
+      - name: Configure x86_64${{ steps.vars.outputs.flv }}
+        run: |
+          make x86_64${{ steps.vars.outputs.flv }}_defconfig
+
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: "artifact-*"
+          merge-multiple: true
+
+      - name: Restore x86-64${{ steps.vars.outputs.flv }} output/
+        run: |
+          ls -l
+          mkdir -p output
+          mv infix-x86_64.tar.gz output/
+          cd output/
+          tar xf infix-x86_64.tar.gz
+          ln -s infix-x86_64 images
+
+      - name: Regression Test x86_64${{ steps.vars.outputs.flv }}
+        run: |
+          make test
+
+      - name: Publish Test Result for x86_64${{ steps.vars.outputs.flv }}
+        # Ensure this runs even if Regression Test fails
+        if: always()
+        run: cat test/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY
+
+      - name: Generate Test Report for x86_64${{ steps.vars.outputs.flv }}
+        # Ensure this runs even if Regression Test fails
+        if: always()
+        run: |
+          asciidoctor-pdf \
+          --theme test/9pm/report/theme.yml \
+          -a pdf-fontsdir=test/9pm/report/fonts \
+          test/.log/last/report.adoc \
+          -o test/.log/last/report.pdf
+
+      - name: Upload Test Report as Artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: test-report
+          path: test/.log/last/report.pdf
+
+  release:
+    if: ${{github.repository_owner == 'kernelkit' && github.ref_name == 'main'}}
+    name: Upload Latest Build
+    needs: test
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: "artifact-*"
+          merge-multiple: true
+
+      - name: Create checksums ...
+        run: |
+          for file in *.tar.gz; do
+              sha256sum $file > $file.sha256
+          done
+
+      - uses: ncipollo/release-action@v1
+        with:
+          allowUpdates: true
+          omitName: true
+          omitBody: true
+          omitBodyDuringUpdate: true
+          prerelease: true
+          tag: "latest"
+          token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts: "*.tar.gz*"
+
+      - name: Summary
+        run: |
+          cat <<EOF >> $GITHUB_STEP_SUMMARY
+          # Latest Build Complete! :rocket:
+
+          For the public download links of these build artifacts, please see:
+           <https://github.com/kernelkit/infix/releases/tag/latest>
+          EOF

.github/workflows/check-kernel-release.yml

@@ -1,140 +0,0 @@
-name: Check Kernel 6.18 Release
-
-on:
-  schedule:
-    - cron: '0 3 * * *'
-  workflow_dispatch:
-
-jobs:
-  check-kernel:
-    if: github.repository == 'kernelkit/infix'
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out infix repository
-        uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
-          token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Fetch kernel.org and check for 6.18 release
-        id: check
-        run: |
-          set -e -o pipefail
-          # Fetch the kernel.org frontpage and extract 6.18 version
-          CURRENT_VERSION=$(curl -s https://www.kernel.org/ | grep -oP '6\.18\.\d+' | head -n1)
-
-          if [ -z "$CURRENT_VERSION" ]; then
-            echo "Failed to fetch kernel version"
-            exit 1
-          fi
-
-          echo "current_version=$CURRENT_VERSION" >> $GITHUB_OUTPUT
-          echo "Current 6.18 kernel version: $CURRENT_VERSION"
-
-          # Get the version from infix defconfig
-          INFIX_VERSION=$(grep 'BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE=' configs/aarch64_defconfig | cut -d'"' -f2)
-
-          echo "infix_version=$INFIX_VERSION" >> $GITHUB_OUTPUT
-          echo "Infix kernel version: $INFIX_VERSION"
-
-          if [ "$CURRENT_VERSION" != "$INFIX_VERSION" ]; then
-            # Check if there's already an open PR for this version
-            PR_EXISTS=$(gh pr list --state open --search "Upgrade to kernel $CURRENT_VERSION in:title" --json number --jq 'length')
-
-            if [ "$PR_EXISTS" -gt 0 ]; then
-              echo "new_release=false" >> $GITHUB_OUTPUT
-              echo "PR already exists for kernel $CURRENT_VERSION, skipping"
-            else
-              echo "new_release=true" >> $GITHUB_OUTPUT
-              echo "🎉 New 6.18 kernel released: $CURRENT_VERSION (infix version: $INFIX_VERSION)"
-            fi
-          else
-            echo "new_release=false" >> $GITHUB_OUTPUT
-            echo "No change - still at $CURRENT_VERSION"
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Generate branch name
-        if: steps.check.outputs.new_release == 'true'
-        id: branch
-        run: |
-          BRANCH_NAME="kernel-upgrade-$(uuidgen | tr '[:upper:]' '[:lower:]')"
-          echo "name=$BRANCH_NAME" >> $GITHUB_OUTPUT
-          echo "Branch name: $BRANCH_NAME"
-
-      - name: Import GPG key
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          # Import the GPG key
-          echo "${{ secrets.AEL_BOT_GPG_PRIVATE_KEY }}" | gpg --batch --import
-
-          # Get the key ID
-          GPG_KEY_ID=$(gpg --list-secret-keys --keyid-format=long | grep '^sec' | head -1 | awk '{print $2}' | cut -d'/' -f2)
-          echo "GPG_KEY_ID=$GPG_KEY_ID" >> $GITHUB_ENV
-
-          # Configure GPG agent for non-interactive use
-          echo "allow-loopback-pinentry" >> ~/.gnupg/gpg-agent.conf
-          echo "pinentry-mode loopback" >> ~/.gnupg/gpg.conf
-          gpg-connect-agent reloadagent /bye || true
-
-      - name: Set up git credentials
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          set -e -o pipefail
-          git config --global user.email "ael-bot@users.noreply.github.com"
-          git config --global user.name "ael-bot"
-          git config --global commit.gpgsign true
-          git config --global user.signingkey ${{ env.GPG_KEY_ID }}
-
-          # Configure git to use the token for HTTPS operations
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "git@github.com:"
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "https://github.com/"
-
-      - name: Run kernel upgrade script
-        if: steps.check.outputs.new_release == 'true'
-        env:
-          GIT_TERMINAL_PROMPT: 0
-          BRANCH_NAME: ${{ steps.branch.outputs.name }}
-        run: |
-          set -e -o pipefail
-          ./utils/kernel-upgrade.sh linux 6.18 "$BRANCH_NAME"
-
-      - name: Create pull request
-        if: steps.check.outputs.new_release == 'true'
-        uses: actions/github-script@v8
-        with:
-          github-token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-          script: |
-            const { data: pulls } = await github.rest.pulls.list({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              head: `${context.repo.owner}:kernel-upgrade`,
-              state: 'open'
-            });
-
-            if (pulls.length === 0) {
-              const { data: pr } = await github.rest.pulls.create({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                title: `Upgrade to kernel ${{ steps.check.outputs.current_version }}`,
-                head: '${{ steps.branch.outputs.name }}',
-                base: 'main',
-                body: `Automated kernel upgrade to version ${{ steps.check.outputs.current_version }}.\n\n**Previous version:** ${{ steps.check.outputs.infix_version }}\n**New version:** ${{ steps.check.outputs.current_version }}\n**Source:** https://www.kernel.org/\n\nThis PR was automatically created by the kernel release monitoring workflow.`
-              });
-
-              await github.rest.issues.addLabels({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                labels: ['ci:main']
-              });
-
-              await github.rest.pulls.requestReviewers({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                pull_number: pr.number,
-                reviewers: ['troglobit', 'wkz', 'mattiaswal']
-              });
-            }

.github/workflows/coverity.yml

@@ -8,15 +8,13 @@ on:
 env:
   PROJECT_NAME: Infix
   CONTACT_EMAIL: troglobit@gmail.com
-  LIBYANG_VERSION: 4.2.2
-  SYSREPO_VERSION: 4.2.10
 
 jobs:
   coverity:
     if: ${{github.repository_owner == 'kernelkit'}}
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
       - name: Fetch latest Coverity Scan MD5
         id: var
         env:
@@ -27,7 +25,7 @@ jobs:
                -O coverity-latest.tar.gz.md5
           echo "md5=$(cat coverity-latest.tar.gz.md5)" | tee -a $GITHUB_OUTPUT
 
-      - uses: actions/cache@v5
+      - uses: actions/cache@v4
         id: cache
         with:
           path: coverity-latest.tar.gz
@@ -57,32 +55,24 @@ jobs:
           sudo apt-get -y update
           sudo apt-get -y install pkg-config libjansson-dev libev-dev \
                        libcrypt-dev libglib2.0-dev libpcre2-dev       \
-                       libuev-dev libavahi-client-dev
+                       libuev-dev
 
       - name: Build dependencies
         run: |
-          git clone -b v${LIBYANG_VERSION} --depth 1 https://github.com/CESNET/libyang.git
-          for p in patches/libyang/${LIBYANG_VERSION}/*.patch; do
-            git -C libyang apply < "$p"
-          done
+          git clone https://github.com/CESNET/libyang.git
           mkdir libyang/build
           (cd libyang/build && cmake .. && make all && sudo make install)
-
-          git clone -b v${SYSREPO_VERSION} --depth 1 https://github.com/sysrepo/sysrepo.git
-          for p in patches/sysrepo/${SYSREPO_VERSION}/*.patch; do
-            git -C sysrepo apply < "$p"
-          done
+          git clone https://github.com/sysrepo/sysrepo.git
           mkdir sysrepo/build
           (cd sysrepo/build && cmake .. && make all && sudo make install)
-
           git clone https://github.com/troglobit/libite.git
           (cd libite && ./autogen.sh && ./configure && make && sudo make install)
           make dep
 
-      - name: Build applications for Coverity
+      - name: Check applications
         run: |
           export PATH=`pwd`/coverity/bin:$PATH
-          cov-build --dir cov-int make coverity
+          cov-build --dir cov-int make check
 
       - name: Submit results to Coverity Scan
         env:
@@ -98,7 +88,7 @@ jobs:
             https://scan.coverity.com/builds?project=${PROJECT_NAME}
 
       - name: Upload build.log
-        uses: actions/upload-artifact@v7
+        uses: actions/upload-artifact@v4
         with:
           name: coverity-build.log
           path: cov-int/build-log.txt

.github/workflows/docs.yml

@@ -1,68 +0,0 @@
-name: User Guide Generator
-
-on:
-  push:
-    branches:
-      - doc
-      - main
-    tags:
-      - 'v*'
-    paths:
-      - 'doc/**'
-      - 'mkdocs.yml'
-      - '.github/workflows/docs.yml'
-
-permissions:
-  contents: write
-
-concurrency:
-  group: "docs-${{ github.ref }}"
-  cancel-in-progress: false
-
-jobs:
-  docs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v6
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v6
-        with:
-          python-version: '3.x'
-
-      - name: Install dependencies
-        run: |
-          pipx install mkdocs
-          pipx inject mkdocs mkdocs-material
-          pipx inject mkdocs pymdown-extensions
-          pipx inject mkdocs mkdocs-callouts
-          pipx inject mkdocs mike
-          pipx inject mkdocs mkdocs-to-pdf
-          pipx inject mkdocs mkdocs-glightbox
-          # Workaround, if pipx inject fails to install symlink
-          ln -s "$(pipx environment -V PIPX_LOCAL_VENVS)/mkdocs/bin/mike" \
-                "$(pipx environment -V PIPX_BIN_DIR)/mike" || true
-
-      - name: Configure Git
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-
-      - name: Deploy dev version
-        if: github.event_name == 'push' && (github.ref == 'refs/heads/doc' || github.ref == 'refs/heads/main')
-        run: |
-          mike deploy --push --update-aliases dev latest
-          mike set-default --push latest
-
-      - name: Deploy tagged version
-        if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags/v')
-        run: |
-          TAG=${GITHUB_REF#refs/tags/v}
-          # Extract YEAR.MONTH from tag (e.g., v25.06.0-beta1 -> 25.06)
-          VERSION=$(echo $TAG | sed -E 's/^([0-9]+\.[0-9]+)(\.[0-9]+)?(-.*)?$/\1/')
-          echo "Deploying tag $TAG as docs version $VERSION"
-          mike deploy --push --update-aliases $VERSION latest
-          mike set-default --push latest

.github/workflows/generic-x86-build.yml

@@ -1,84 +0,0 @@
-name: Generic X86 GitHub Build
-
-on:
-  push:
-
-jobs:
-  build:
-    if: github.repository != 'kernelkit/infix'
-    name: Infix x86_64
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Free Disk Space
-        uses: jlumbroso/free-disk-space@main
-        with:
-          tool-cache: true
-          android: true
-          dotnet: true
-          haskell: true
-          large-packages: true
-          docker-images: true
-          swap-storage: false
-
-      - name: Install build dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            bc binutils build-essential bzip2 cpio \
-            diffutils file findutils git gzip \
-            libncurses-dev libssl-dev perl patch \
-            python3 rsync sed tar unzip wget \
-            autopoint bison flex autoconf automake \
-            mtools
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v6
-        with:
-          repository: ${{ github.repository }}
-          ref: ${{ github.ref }}
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          echo "INFIX_BUILD_ID=${{ github.run_id }}" >> $GITHUB_OUTPUT
-          echo "dir=Infix-x86_64" >> $GITHUB_OUTPUT
-          echo "tgz=Infix-x86_64.tar.gz" >> $GITHUB_OUTPUT
-
-      - name: Configure x86_64_minimal
-        run: |
-          make x86_64_minimal_defconfig
-
-      - name: Unit Test x86_64
-        run: |
-          make test-unit
-
-      - name: Build x86_64_minimal
-        run: |
-          make
-
-      - name: Check SBOM
-        run: |
-          make legal-info
-
-      - name: Report Build Size
-        run: |
-          du -sh .
-          du -sh output
-          du -sh dl || true
-          ls -l output/images/
-
-      - name: Prepare Artifact
-        run: |
-          cd output/
-          mv images Infix-x86_64
-          ln -s Infix-x86_64 images
-          tar cfz Infix-x86_64.tar.gz Infix-x86_64
-
-      - uses: actions/upload-artifact@v7
-        with:
-          path: output/Infix-x86_64.tar.gz
-          name: artifact-x86_64
-

.github/workflows/inventory.yml

@@ -44,11 +44,23 @@ jobs:
   checkout:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v6
-      - uses: kernelkit/actions/cache-restore@v1
+      - uses: actions/checkout@v4
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
         with:
-          target: x86_64
-          dl-prefix: dl-netconf
+          path: dl/
+          key: dl-netconf-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-netconf-
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-x86_64-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-x86_64-
+            ccache-
       - name: Disk inventory (2/2) ...
         run: |
           echo "df -h ========================================================================="

.github/workflows/publish.yml

@@ -1,44 +0,0 @@
-name: Publish latest Infix
-
-on:
-  workflow_dispatch:
-  workflow_call:
-
-jobs:
-  publish:
-    name: Upload Latest Build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          replacesArtifacts: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Latest Build Complete! :rocket:
-
-          For the public download links of these build artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-          EOF

.github/workflows/release.yml

@@ -18,42 +18,95 @@ on:
         type: string
 
 jobs:
-  set-version:
+  build:
     if: github.repository == 'kernelkit/infix' && startsWith(github.ref, 'refs/tags/')
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.set-ver.outputs.version }}
+    name: Build Infix ${{ github.ref_name }} [${{ matrix.target }}]
+    runs-on: [ self-hosted, release ]
+    strategy:
+      matrix:
+        target: [aarch64, x86_64]
+      fail-fast: false
     steps:
-      - id: set-ver
+      - uses: actions/checkout@v4
+        with:
+          clean: true
+          submodules: recursive
+
+      - name: Set Release Variables
+        id: vars
         run: |
           if [ -n "${{ inputs.version }}" ]; then
               ver=${{ inputs.version }}
           else
               ver=${GITHUB_REF#refs/tags/}
           fi
-          echo "version=${ver}" >> $GITHUB_OUTPUT
+          echo "ver=${ver}" >> $GITHUB_OUTPUT
+          fver=${ver#v}
+          target=${{ matrix.target }}-${fver}
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
 
-  build:
-    needs: set-version
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: ${{ needs.set-version.outputs.version }}
-      use_cache: true
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-
+
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-${{ matrix.target }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.target }}-
+            ccache-
+
+      - name: Configure & Build
+        env:
+          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
+        run: |
+          target=${{ matrix.target }}_defconfig
+          echo "Building $target ..."
+          make $target
+          make
+
+      - name: Generate SBOM from Build
+        run: |
+          make legal-info
+
+      - name: Build test specification
+        run: |
+          make test-spec
+
+      - name: Prepare Artifacts
+        run: |
+          cd output/
+          mv images ${{ steps.vars.outputs.dir }}
+          ln -s ${{ steps.vars.outputs.dir }} images
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+
+          mv legal-info legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
+          tar cfz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}.tar.gz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: artifact-${{ matrix.target }}
+          path: output/*.tar.gz
 
   release:
     name: Release Infix ${{ github.ref_name }}
     needs: build
-    runs-on: [self-hosted, release]
+    runs-on: [ self-hosted, release ]
     permissions:
       contents: write
       discussions: write
     steps:
-      - uses: actions/checkout@v6
+      - uses: actions/checkout@v4
         with:
           submodules: 'true'
 
-      - uses: kernelkit/actions/podman-cleanup@v1
-
       - name: Set Release Variables
         id: rel
         run: |
@@ -67,7 +120,7 @@ jobs:
           if echo $ver | grep -qE 'v[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
             echo "pre=true"     >> $GITHUB_OUTPUT
             echo "latest=false" >> $GITHUB_OUTPUT
-          elif echo $ver | grep -qE '^v[0-9]+\.[0-9]+(\.0)?$'; then
+          elif echo $ver | grep -qE '^v[0-9.]+\.[0-9.]+(\.[0-9]+)?$'; then
             echo "pre=false"    >> $GITHUB_OUTPUT
             echo "latest=true"  >> $GITHUB_OUTPUT
             echo "cat=Releases" >> $GITHUB_OUTPUT
@@ -78,7 +131,7 @@ jobs:
           echo "pre=${{ steps.rel.outputs.pre }}"
           echo "latest=${{ steps.rel.outputs.latest }}"
 
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v4
         with:
           pattern: "artifact-*"
           merge-multiple: true
@@ -88,15 +141,11 @@ jobs:
           for file in *.tar.gz; do
               sha256sum $file > $file.sha256
           done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
 
       - name: Extract ChangeLog entry ...
         run: |
-          cat doc/ChangeLog.md | ./utils/extract-changelog.sh > release.md
+          awk '/^-----*$/{if (x == 1) exit; x=1;next}x' doc/ChangeLog.md \
+              |head -n -1 > release.md
           cat release.md
 
       - uses: ncipollo/release-action@v1
@@ -105,8 +154,8 @@ jobs:
           prerelease: ${{ steps.rel.outputs.pre }}
           makeLatest: ${{ steps.rel.outputs.latest }}
           discussionCategory: ${{ steps.rel.outputs.cat }}
-          bodyFile: release.md
-          artifacts: "*.tar.gz*,*.qcow2*"
+          bodyFile:  release.md
+          artifacts: "*.tar.gz*"
 
       - name: Summary
         run: |

.github/workflows/test.yml

@@ -1,145 +0,0 @@
-name: Test Infix
-
-on:
-  workflow_dispatch:
-    inputs:
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        required: false
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      ninepm-conf:
-        required: false
-        type: string
-        default: ''
-      test-path:
-        required: false
-        type: string
-        default: 'test'
-      pre_test_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-      release:
-        required: false
-        type: string
-        default: ''
-        description: 'Release version (e.g. v26.04.0), sets INFIX_RELEASE so make test finds versioned artifacts'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-  NINEPM_CONF: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.ninepm-conf || inputs.ninepm-conf }}
-  TEST_PATH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.test-path || inputs.test-path }}
-
-jobs:
-  test:
-    name: Regression Test ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [self-hosted, regression]
-    steps:
-      - name: Checkout infix repo
-        uses: actions/checkout@v6
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-test script
-        if: ${{ inputs.pre_test_script != '' }}
-        run: |
-          cat > ./pre-test.sh << 'EOF'
-          ${{ inputs.pre_test_script }}
-          EOF
-          chmod +x ./pre-test.sh
-          bash ./pre-test.sh
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          if [ -n "${{ needs.build.outputs.build_id }}" ]; then
-              echo "INFIX_BUILD_ID=${{ needs.build.outputs.build_id }}" \
-                   >>$GITHUB_ENV
-          fi
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - uses: actions/download-artifact@v7
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Restore ${{ env.TARGET }} output/
-        run: |
-          target=${{ env.TARGET }}
-          name=${{ inputs.name }}
-
-          ls -l
-          mkdir -p output
-          tarfile=$(ls ${name}-${target}*.tar.gz | head -1)
-          mv "$tarfile" output/
-          cd output/
-          tar xf "$tarfile"
-          ln -s "${tarfile%.tar.gz}" images
-
-      - name: Regression Test ${{ env.TARGET }}
-        env:
-          INFIX_RELEASE: ${{ inputs.release }}
-        run: |
-          if [ -n "$NINEPM_CONF" ]; then
-            export NINEPM_PROJ_CONFIG="${GITHUB_WORKSPACE}/$NINEPM_CONF"
-            echo "DEBUG: NINEPM_PROJ_CONFIG is '$NINEPM_PROJ_CONFIG'"
-          fi
-          make test
-
-      - name: Publish Test Result for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          cat $TEST_PATH/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY
-
-      - name: Generate Test Report for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          make test-dir="$(pwd)/$TEST_PATH" test-report
-
-      - name: Upload Test Report as Artifact
-        uses: actions/upload-artifact@v7
-        with:
-          name: test-report
-          path: output/images/test-report.pdf

.github/workflows/trigger.yml

@@ -1,91 +0,0 @@
-name: CI
-
-on:
-  pull_request:
-    types: [opened, synchronize, reopened, labeled]
-  push:
-    branches:
-      - main
-      - ci-work
-  workflow_dispatch:
-
-concurrency:
-  group: ci-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  # Gate all builds through this check to prevent wasted runs.  Only run on
-  # 'labeled' events when the label is actually 'ci:main'.  Concurrency control
-  # above handles canceling the 'opened' event when 'labeled' arrives quickly
-  # after (e.g., when creating a PR with ci:main already attached). See #1154.
-  check-trigger:
-    if: |
-      startsWith(github.repository, 'kernelkit/') &&
-      (github.event_name != 'pull_request' ||
-       github.event.action != 'labeled' ||
-       github.event.label.name == 'ci:main')
-    runs-on: ubuntu-latest
-    outputs:
-      x86_64_target: ${{ steps.set-targets.outputs.x86_64_target }}
-      aarch64_target: ${{ steps.set-targets.outputs.aarch64_target }}
-      arm_target: ${{ steps.set-targets.outputs.arm_target }}
-    steps:
-      - run: |
-          echo "Triggering build, logging meta data ..."
-          echo "Event  : ${{ github.event_name }}"
-          echo "Action : ${{ github.event.action }}"
-          echo "Ref    : ${{ github.ref }}"
-          echo "PR     : ${{ github.event.pull_request.number }}"
-          echo "Label  : ${{ github.event.label.name }}"
-      - id: set-targets
-        run: |
-          if [[ "${{ github.event_name }}" == "pull_request" ]] &&           \
-             ! echo '${{ toJSON(github.event.pull_request.labels.*.name) }}' \
-             | grep -q "ci:main"; then
-            echo "x86_64_target=x86_64_minimal" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64_minimal" >> $GITHUB_OUTPUT
-            echo "arm_target=arm_minimal" >> $GITHUB_OUTPUT
-          else
-            echo "x86_64_target=x86_64" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64" >> $GITHUB_OUTPUT
-            echo "arm_target=arm" >> $GITHUB_OUTPUT
-          fi
-  unit-test:
-    needs: check-trigger
-    uses: ./.github/workflows/unit-test.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-x86_64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-aarch64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.aarch64_target }}
-
-  build-arm:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.arm_target }}
-
-  test-run-x86_64:
-    needs: [check-trigger, build-x86_64]
-    uses: ./.github/workflows/test.yml
-    with:
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-      name: "infix"
-
-  test-publish-x86_64:
-    if: ${{ github.repository_owner == 'kernelkit' && github.ref_name == 'main' }}
-    needs: test-run-x86_64
-    uses: ./.github/workflows/publish.yml

.github/workflows/unit-test.yml

@@ -1,116 +0,0 @@
-name: unit-test
-
-on:
-  workflow_dispatch:
-    inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
-        default: true
-        type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-
-jobs:
-  unit-tests:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
-    strategy:
-      fail-fast: false
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v6
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Unit Test ${{ env.TARGET }}
-        run: |
-          make test-unit

.github/workflows/weekly.yml

@@ -1,68 +0,0 @@
-# Weekly release build to catch flaky tests and verify clean builds.
-# Runs without caches (ccache) to ensure reproducibility. See issue #1003.
-name: Weekly Build
-
-on:
-  schedule:
-    - cron: '5 0 * * 6'  # Saturday at 00:05 UTC, same as Coverity
-  workflow_dispatch:
-
-jobs:
-  build:
-    if: github.repository == 'kernelkit/infix'
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: "latest"
-      use_cache: false
-
-  publish:
-    name: Publish Weekly Build
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v6
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums
-        run: |
-          for file in *.tar.gz; do
-            sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
-      - uses: ncipollo/release-action@v1
-        with:
-          tag: latest
-          name: "Latest Weekly Build"
-          prerelease: true
-          makeLatest: false
-          allowUpdates: true
-          removeArtifacts: true
-          body: |
-            Automated weekly build from `${{ github.sha }}`.
-
-            This build runs without caches to catch potential flaky tests and build issues.
-            Not intended for production use - use official releases instead.
-
-            **Commit:** ${{ github.sha }}
-            **Built:** ${{ github.run_id }}
-          artifacts: "*.tar.gz*,*.qcow2*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Weekly Build Published! :package:
-
-          Latest artifacts uploaded to:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-
-          Built from commit: \`${{ github.sha }}\`
-          EOF

.gitignore

@@ -1,8 +1,5 @@
 *~
-.claude
 .gdb_history
-.claude
-AGENTS.md
 /.backup
 /.ccache
 /dl

Config.in

@@ -1,5 +1,3 @@
-source "$BR2_EXTERNAL_INFIX_PATH/board/Config.in"
-
 menu "Branding"
 
 config INFIX_VENDOR
@@ -67,7 +65,7 @@ config INFIX_COMPATIBLE
 
 config INFIX_TAGLINE
 	string "Operating system tagline"
-	default "Infix OS — Immutable.Friendly.Secure"
+	default "Infix -- a Network Operating System"
 	help
 	  Mandatory. Used for identifying the OS, e.g. as PRETTY_NAME in
 	  /etc/os-release and description in the GNS3 appliance.

Makefile

@@ -9,16 +9,15 @@ O    ?= output
 # otherwise treat it as relative to ./buildroot.
 override O := $(if $(filter /%,$O),$O,$(CURDIR)/$O)
 
-config      := $(O)/.config
-bmake        = $(MAKE) -C buildroot O=$(O) $1
-SNIPPETS_DIR := $(CURDIR)/configs/snippets
-MERGE_CONFIG := $(CURDIR)/buildroot/support/kconfig/merge_config.sh
+config := $(O)/.config
+bmake   = $(MAKE) -C buildroot O=$(O) $1
 
 
 all: $(config) buildroot/Makefile
 	@+$(call bmake,$@)
 
-check dep coverity:
+check dep:
+	@echo "Starting local check, stage $@ ..."
 	@make -C src $@
 
 $(config):
@@ -28,34 +27,12 @@ $(config):
 	@echo "'make <board>_defconfig' before building an image."
 	@exit 1
 
-apply-%: $(SNIPPETS_DIR)/%.conf | $(config)
-	@KCONFIG_CONFIG=$(config) $(MERGE_CONFIG) -m $(config) $<
-	@+$(call bmake,olddefconfig)
-	@echo "Applied snippet: $<"
-
-list-snippets:
-	@echo "Available snippets (use 'make apply-<name>'):"
-	@ls $(SNIPPETS_DIR)/*.conf 2>/dev/null | sed 's|.*/||; s|\.conf$$||; s|^|  |'
-
-dev: | $(config)
-	@for s in $(SNIPPETS_DIR)/*.conf; do \
-		KCONFIG_CONFIG=$(config) $(MERGE_CONFIG) -m $(config) $$s; \
-		echo "Applied snippet: $$s"; \
-	done
-	@+$(call bmake,olddefconfig)
-	@+$(call bmake,all)
-
 %: | buildroot/Makefile
 	@+$(call bmake,$@)
 
 legal-info: | buildroot/Makefile
 	$(call bmake,legal-info LINUX_LICENSE_FILES=COPYING)
 
-cyclonedx: | buildroot/Makefile
-	@echo "Generating package information..."
-	@$(MAKE) --no-print-directory -C buildroot O=$(O) show-info | ./buildroot/utils/generate-cyclonedx > $(O)/cyclonedx-sbom.json
-	@echo "CycloneDX SBOM generated: $(O)/cyclonedx-sbom.json"
-
 # Workaround, see board/x86_64/board.mk
 test:
 	@+$(call bmake,$@)
@@ -63,4 +40,4 @@ test:
 buildroot/Makefile:
 	@git submodule update --init
 
-.PHONY: all check coverity dep test cyclonedx list-snippets dev
+.PHONY: all check test

README.md

@@ -1,78 +1,66 @@
-[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
+[![License Badge][]][License] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
 
-<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=480 padding=10>
+<img align="right" src="doc/logo.png" alt="Infix - Linux <3 NETCONF" width=480 border=10>
 
-Turn any ARM or x86 device into a powerful, manageable network appliance
-in minutes. From $35 Raspberry Pi boards to enterprise switches — deploy
-routers, IoT gateways, edge devices, or custom network solutions that
-just work.
+Infix is a free, Linux based, immutable Network Operating System (NOS)
+built on [Buildroot][1], and [sysrepo][2].  A powerful mix that ease
+porting to different platforms, simplify long-term maintenance, and
+provide made-easy management using NETCONF, RESTCONF[^2], or the
+built-in command line interface (CLI) from a console or SSH login.
 
-## Our Values
+> Click the **▶ Example CLI Session** foldout below for an example, or
+> head on over to the [Infix Documentation](doc/README.md) for more
+> information on how to set up the system.
 
-**🔒 Immutable**  
-Your system never breaks.  Read-only filesystem with atomic upgrades
-means no configuration drift, no corrupted updates, and instant rollback
-if something goes wrong.  Deploy once, trust forever.
+Although primarily focused on switches and routers, the core values
+may be appealing for other use-cases as well:
 
-**🤝 Friendly**  
-Actually easy to use. Auto-generated CLI from standard YANG models comes
-with built-in help for every command — just hit <kbd>?</kbd> or
-<kbd>TAB</kbd> for context-aware assistance.
+- Runs from a squashfs image on a read-only partition
+- Single configuration file on a separate partition
+- Built around YANG with standard IETF models
+- Linux switchdev provides open switch APIs
+- Atomic upgrades to secondary partition
+- Highly security focused
 
-Familiar NETCONF & RESTCONF APIs and [comprehensive documentation][4]
-mean you're never stuck.  Whether you're learning networking or managing
-enterprise infrastructure.
+An immutable[^1] operating system enhances security and inherently makes
+it maintenance-free.  Configuration and data, e.g, containers, is stored
+on separate partitions to ensure complete separation from system files
+and allow for seamless backup, restore, and provisioning.
 
-**🛡️ Secure**  
-Built with security as a foundation, not an afterthought.  Minimal
-attack surface, separation between system and data, and container
-isolation.  Sleep better knowing your infrastructure is protected.
+In itself, Infix is perfectly suited for dedicated networking tasks, and
+with native support for Docker containers, the operating system provides
+a versatile platform that can easily be adapted to any customer need.
+Be it legacy applications, network protocols, process monitoring, or
+edge data analysis, it can run close to end equipment.  Either directly
+connected on dedicated Ethernet ports or indirectly using virtual
+network cables to exist on the same LAN as other connected equipment.
 
-## Why Choose Infix
+The simple design of Infix provides complete control over both system
+and data, minimal cognitive burden, and makes it incredibly easy to get
+started.
 
-**Hardware Flexibility**: Start with a $35 Raspberry Pi, scale to
-enterprise switching hardware.  Same OS, same tools, same reliability.
+<details><summary><b>Example CLI Session</b></summary>
 
-**Standards-Based**: Built around YANG models and IETF standards. Learn
-once, use everywhere - no vendor lock-in.
+The CLI configure context is automatically generated from the loaded
+YANG models and their corresponding [sysrepo][2] plugins.  The following
+is brief example of how to set the IP address of an interface:
 
-**Container Ready**: Run your applications alongside networking
-functions.  GPIO access, dedicated Ethernet ports, custom protocols —
-your device, your rules.
-
-## Use Cases
-
-1. **Home Labs & Hobbyists**:  
-   Transform a Raspberry Pi into a full-featured router with WiFi  
-1. **IoT & Edge Computing**:  
-   Bridge devices to the cloud with reliable, updatable gateways  
-1. **Small Business Networks**:  
-   Enterprise-grade features without the complexity or cost  
-1. **Developers & Makers**:  
-   Test networking concepts, prototype IoT solutions, or build custom
-   appliances
-1. **Network Professionals**:  
-   Consistent tooling from development to production deployment.  
-   How about a digital twin using raw Qemu or [GNS3](https://gns3.com/infix)!
-
-## Quick Example
-
-Configure an interface in seconds - the CLI guides you with built-in help:
-
-<pre><code>admin@infix-12-34-56:/> <b>configure</b>
-admin@infix-12-34-56:/config/> <b>edit interface eth0</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4</b> <kbd>TAB</kbd>
-      address     autoconf      bind-ni-name     dhcp 
-      enabled     forwarding    mtu              neighbor
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4 address 192.168.2.200 prefix-length 24</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>show</b>
+```
+admin@infix-12-34-56:/> configure
+admin@infix-12-34-56:/config/> edit interface eth0
+admin@infix-12-34-56:/config/interface/eth0/> set ipv4 <TAB>
+      address     autoconf bind-ni-name      enabled
+	  forwarding  mtu      neighbor
+admin@infix-12-34-56:/config/interface/eth0/> set ipv4 address 192.168.2.200 prefix-length 24
+admin@infix-12-34-56:/config/interface/eth0/> show
 type ethernet;
 ipv4 {
   address 192.168.2.200 {
     prefix-length 24;
   }
 }
-admin@infix-12-34-56:/config/interface/eth0/> <b>diff</b>
+ipv6
+admin@infix-12-34-56:/config/interface/eth0/> diff
 interfaces {
   interface eth0 {
 +    ipv4 {
@@ -82,100 +70,67 @@ interfaces {
 +    }
   }
 }
-admin@infix-12-34-56:/config/interface/eth0/> <b>leave</b>
-admin@infix-12-34-56:/> <b>show interfaces</b>
-<u>INTERFACE       PROTOCOL   STATE       DATA                                  </u>
-lo              ethernet   UP          00:00:00:00:00:00
-                ipv4                   127.0.0.1/8 (static)
-                ipv6                   ::1/128 (static)
+admin@infix-12-34-56:/config/interface/eth0/> leave
+admin@infix-12-34-56:/> show interfaces
+INTERFACE       PROTOCOL   STATE       DATA
 eth0            ethernet   UP          52:54:00:12:34:56
                 ipv4                   192.168.2.200/24 (static)
                 ipv6                   fe80::5054:ff:fe12:3456/64 (link-layer)
-admin@infix-12-34-56:/> <b>copy running startup</b>
-</code></pre>
+lo              ethernet   UP          00:00:00:00:00:00
+                ipv4                   127.0.0.1/8 (static)
+                ipv6                   ::1/128 (static)
+admin@infix-12-34-56:/> copy running-config startup-config
+```
 
-Notice how <kbd>TAB</kbd> completion shows available options, `show`
-displays current config, and `diff` shows exactly what changed before
-you commit your changes with the `leave` command.
+[Click here][3] for more details.
+</details>
 
-For more information, see [CLI documentation][3].
+Infix can run on many different types of architectures and boards, much
+thanks to Linux and Buildroot.  Currently the focus is on 64-bit ARM
+devices, optionally with switching fabric supported by Linux switchdev.
+The [following boards](board/aarch64/README.md) are fully supported:
 
-## Get Started
+ - Marvell CN9130 CRB
+ - Marvell EspressoBIN
+ - Microchip SparX-5i PCB135 (eMMC)
+ - StarFive VisionFive2
+ - NanoPi R2S
 
-Get [pre-built images][5] for your hardware.  Use the CLI, web
-interface, or standard NETCONF/RESTCONF tools, e.g., `curl`.  Add
-containers for any custom functionality you need.
+An x86_64 build is also available, primarily intended for development
+and testing, but can also be used for evaluation and demo purposes.  For
+more information, see: [Infix in Virtual Environments](doc/virtual.md).
 
-### Supported Platforms
+> See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
+> page for our pre-built images.  The *[Latest Build][]* has bleeding
+> edge images, if possible we recommend using a versioned release.
+>
+> For *customer specific builds* of Infix, see your product repository.
 
-- **Raspberry Pi 2B/3B/4B/CM4** - Perfect for home labs, learning, and prototyping
-- **Banana Pi-R3** - Your next home router and gateway
-- **NanoPi R2S** - Compact dual-port router in a tiny package
-- **x86_64** - Run in VMs or on mini PCs for development and testing
-- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM64 platforms
-- **Microchip SparX-5i** - Enterprise switching capabilities
-- **Microchip SAMA7G54-EK** - ARM Cortex-A7
-- **NXP i.MX8MP EVK** - Highly capable ARM64 SoC
-- **StarFive VisionFive2** - RISC-V architecture support
 
-*Why start with Raspberry Pi?* It's affordable, widely available, has
-built-in WiFi + Ethernet, and runs the exact same Infix OS you'd deploy
-in production. Perfect for learning, prototyping, or even small-scale
-deployments.
-
-> 📖 **[Complete documentation][4]** • 💬 **[Join our Discord][discord-url]**
-
-## Technical Details
-
-<a href="https://bitsign.se">
-  <picture>
-    <source media="(prefers-color-scheme: dark)" srcset="https://bitsign.se/assets/badges/bitsign-badge-dark-mode.png">
-    <source media="(prefers-color-scheme: light)" srcset="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png">
-    <img alt="bitSign - Code Signing" src="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png" align="right" width=150 padding=10>
-  </picture>
-</a>
-
-Built on proven open-source foundations: [Linux][0], [Buildroot][1], and
-[sysrepo][2] — for reliability you can trust:
-
-- **Immutable OS**: Read-only filesystem, atomic updates, instant rollback
-- **YANG Configuration**: Industry-standard models with auto-generated tooling
-- **Hardware Acceleration**: Linux switchdev support for wire-speed packet processing
-- **Container Integration**: Docker support with flexible network and hardware access
-- **Memory Efficient**: Runs comfortably on devices with as little as 256 MB RAM
-- **Code Signing**: Releases are cryptographically signed for integrity verification
-
-Perfect for everything from resource-constrained edge devices to
-high-throughput network appliances.
-
-With the entire system modeled in YANG, scalability is no longer an
-issue, be it in development, testing, or end users deploying and
-monitoring their devices.  All knobs and dials are accessible from the
-CLI (console/SSH), or remotely using the native NETCONF or RESTCONF
-APIs.
-
-> Check the *[Latest Build][]* for bleeding-edge features.
-
----
+----
 
 <div align="center">
-  <a href="https://github.com/wires-se"><img src="https://raw.githubusercontent.com/wires-se/.github/main/profile/play.svg" width=300></a>
-  <br />Infix development is sponsored by <a href="https://wires.se">Wires</a>
+  <a href="https://github.com/wires-se"><img src="https://raw.githubusercontent.com/wires-se/.github/main/profile/logo.png" width=300></a>
+  <br />Infix development is sponsored by <a href="https://wires.se">Wires<a>
 </div>
 
-![Alt](https://repobeats.axiom.co/api/embed/5ce7a2a67edc923823afa0f60c327a6e8575b6e9.svg "Repobeats analytics image")
+----
 
-[0]: https://www.kernel.org
-[1]: https://buildroot.org/ "Buildroot Homepage"
-[2]: https://www.sysrepo.org/ "Sysrepo Homepage"
-[3]: https://www.kernelkit.org/infix/latest/cli/introduction/
-[4]: https://www.kernelkit.org/infix/
-[5]: https://github.com/kernelkit/infix/releases/latest
-[Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest "Latest build"
+[^1]: An immutable operating system is one with read-only file systems,
+    atomic updates, rollbacks, declarative configuration, and workload
+    isolation.  All to improve reliability, scalability, and security.
+    For more information, see <https://ceur-ws.org/Vol-3386/paper9.pdf>
+    and <https://www.zdnet.com/article/what-is-immutable-linux-heres-why-youd-run-an-immutable-linux-distro/>.
+
+[^2]: Partial RESTCONF support, features like HTTP PATCH, OPTIONS, HEAD,
+    and copying between datastores are still missing.
+
+[1]: https://buildroot.org/
+[2]: https://www.sysrepo.org/
+[3]: doc/cli/introduction.md
+[Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest
 [License]:         https://en.wikipedia.org/wiki/GPL_license
 [License Badge]:   https://img.shields.io/badge/License-GPL%20v2-blue.svg
-[Release]:         https://github.com/kernelkit/infix/releases/latest
-[Release Badge]:   https://img.shields.io/github/v/release/kernelkit/infix 
 [GitHub]:          https://github.com/kernelkit/infix/actions/workflows/build.yml/
 [GitHub Status]:   https://github.com/kernelkit/infix/actions/workflows/build.yml/badge.svg
 [Coverity Scan]:   https://scan.coverity.com/projects/29393

board/Config.in

@@ -1,8 +0,0 @@
-menu "Board Support"
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/arm/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/riscv64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/x86_64/Config.in"
-
-endmenu

board/README.md

@@ -1,18 +0,0 @@
-Board Support
-=============
-
-The board support for an architecture always starts with Qemu support,
-this is what each `linux_defconfig` at the very least sets up.  Then
-each `$BR2_ARCH` has additional BSPs, e.g., Banana Pi BPI-R3.
-
-The `board/` directory is matched with the `configs/*_defconfigs` and
-the only execption is `board/common/`, which holds all shared files for
-Infix builds.
-
-Each `board/$BR2_ARCH/` can then have vendor/product sub-directories
-for the BSPs which may contain "fixups" to the base kernel config and
-any additional device tree files that should be included as well.
-
-To rebuild a board-specific package, e.g. NanoPi R2S:
-
-    make friendlyarm-nanopi-r2s-rebuild all

board/aarch64/Config.in

@@ -1,16 +0,0 @@
-if BR2_aarch64
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/alder-alder/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/acer-connect-vero-w6m/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r3/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r4/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/freescale-imx8mp-evk/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/friendlyarm-nanopi-r2s/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-cn9130-crb/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-espressobin/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/microchip-sparx5-pcb135/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/raspberrypi-rpi64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/styx-dcp-sc-28p/Config.in"
-
-endif

board/aarch64/README.md

@@ -4,12 +4,6 @@ aarch64
 Board Specific Documentation
 ----------------------------
 
-- [Acer Connect Vero W6m](acer-connect-vero-w6m/)
-- [Banana Pi BPi-R3](bananapi-bpi-r3/)
-- [Banana Pi BPi-R4](bananapi-bpi-r4/)
-- [Banana Pi BPi-R64](bananapi-bpi-r64/)
-- [Marvell CN9130-CRB](marvell-cn9130-crb/)
-- [Marvell ESPRESSObin](marvell-espressobin/)
-- [Microchip SparX-5i PCB135 (eMMC)](microchip-sparx5-pcb135/)
-- [NanoPi R2S](friendlyarm-nanopi-r2s/)
-- [Raspberry Pi 64-bit](raspberrypi-rpi64/)
+- [Marvell CN9130-CRB](cn9130-crb/)
+- [Microchip SparX-5i PCB135 (eMMC)](sparx5-pcb135/)
+- [NanoPi R2S](r2s/)

board/aarch64/acer-connect-vero-w6m/Config.in

@@ -1,6 +0,0 @@
-config BR2_PACKAGE_ACER_CONNECT_VERO_W6M
-	bool "Acer Connect Vero W6m"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_BANANAPI_BPI_R3
-	help
-	  Build Acer Connect Vero W6m

board/aarch64/acer-connect-vero-w6m/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2026 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/acer-connect-vero-w6m/README.md

@@ -1,131 +0,0 @@
-# Acer Connect Vero W6m
-
-<img src="connect_vero_w6m_case.jpg" alt="Acer Connect Vero W6m" width=400 padding=10>
-
-## Overview
-
-The Acer Connect Vero W6m is a compact WiFi 6/6E router platform based
-on the MediaTek MT7986A SoC.  In Infix it is supported as an eMMC-based
-target that reuses the factory secure boot chain while replacing the
-system partitions with an Infix installation.
-
-The Acer Connect Vero W6m is based on the same MT7986a SoC as the
-BPI-R3, with tri-band WiFi (2.4 GHz + 5 GHz + 6 GHz) using a PCIe
-MT7916 module and the SoC's built-in MT7976 DBDC radio.
-
-## Default WiFi Layout
-
-The factory configuration on this branch enables all three radios in AP
-mode and bridges them into the default LAN bridge `br0`:
-
-- `radio0` / `wifi0-ap`: 2.4 GHz, SSID `Infix`
-- `radio1` / `wifi1-ap`: 6 GHz, SSID `Infix6G`
-- `radio2` / `wifi2-ap`: 5 GHz, SSID `Infix5G`
-
-6 GHz operation is enabled in the MT7915e driver configuration, and all
-three APs use the same default passphrase `infixinfix` from the factory
-configuration.
-
-Secure boot is enabled on this device, so the factory bootloader
-(partitions 1-4: bl2, u-boot-env, factory, fip) must not be modified.
-Infix is installed by replacing partitions 5+ while keeping the
-factory bootloader intact.  The stock U-Boot chainloads the Infix
-U-Boot from the first partition after fip.
-
-## Prerequisites
-
-- Serial console access (115200 8N1) — required to interrupt U-Boot.
-  Disassembly is needed to reach the UART header.  See the [OpenWrt
-  Vero W6m page][vero-openwrt] for details.
-- TFTP server on the local network with `u-boot.bin` for the initial
-  RAM boot.
-- SSH access from the running Infix system to a host that stores
-  `infix-vero-w-emmc.img`.
-- Ethernet cable connected between the PC and the Vero Internet/WAN
-  port.
-- DHCP server running on the PC, serving addresses on that link during
-  installation.
-- **Save the MAC addresses** from the stock U-Boot environment before
-  installing.  Interrupt autoboot and run `printenv` to note down:
-  `2gMAC`, `5gMAC`, `6gMAC`, `LANMAC`, and `WANMAC`.
-
-## Required Files
-
-Prepare these files on a host reachable from the Vero:
-
-1. **Infix Vero image:**
-   - [infix-vero-w-emmc.img][1] (Complete system image)
-2. **eMMC bootloader** (extracted from):
-   - [bpi-r3-emmc-boot-2025.01-latest.tar.gz][2]
-   - Extract `u-boot.bin` from the tarball to your TFTP server
-
-## Installing Infix
-
-Connect the PC directly to the Vero Internet/WAN port before starting
-the installation.  The PC should provide DHCP service on that link so
-the stock U-Boot and the temporary Infix system can reach the TFTP/SSH
-host.
-
-1. **RAM-load Infix U-Boot** from the stock U-Boot serial console
-   (hit any key to stop autoboot):
-
-   ```
-   setenv serverip <TFTP_SERVER_IP>
-   setenv ipaddr <VERO_IP>
-   setenv bootmenu_default 7
-   tftpboot 0x46000000 u-boot.bin
-   go 0x46000000
-   ```
-
-   `serverip` must point to your TFTP server and `ipaddr` must be a free
-   address for the Vero on the same subnet.  `bootmenu_default 7`
-   bypasses secure boot verification.  The Infix U-Boot will
-   automatically netboot the Infix system.
-
-2. **From running Infix**, stream the image directly to eMMC:
-
-   ```bash
-   ssh <USER>@<HOST> "dd if=/path/to/infix-vero-w-emmc.img bs=512 skip=17408 status=none" | \
-   dd of=/dev/mmcblk0 bs=512 seek=17408 conv=fsync
-   sync
-   ```
-
-   This writes only the Infix partitions (starting after fip at sector
-   17408), leaving the factory bootloader and calibration data intact.
-   Do not interrupt the transfer; if it fails, rerun the command from
-   the beginning.
-
-3. **Update the GPT** to replace stock partitions 5+ with the Infix
-   layout:
-
-   ```bash
-   sudo sgdisk --zap-all /dev/mmcblk0
-   sudo sgdisk -a 1 \
-       -n2:8192:9215      -c2:u-boot-env  \
-       -n3:9216:13311     -c3:factory      \
-       -n4:13312:17407    -c4:fip          \
-       -n5:17408:+32M     -c5:infix-uboot \
-       -n6:0:+8M          -c6:aux         \
-       -n7:0:+250M        -c7:primary     \
-       -n8:0:+250M        -c8:secondary   \
-       -n9:0:+128M        -c9:cfg         \
-       -n10:0:+128M       -c10:var        \
-       -p /dev/mmcblk0
-   ```
-
-4. **Configure U-Boot to chainload Infix permanently** — reboot and
-   interrupt stock U-Boot again:
-
-   ```
-   setenv bootmenu_default 7
-   setenv bootcmd 'mmc read 0x46000000 0x4400 0x10000; go 0x46000000'
-   saveenv
-   reset
-   ```
-
-   The `bootcmd` reads the Infix U-Boot (at sector 0x4400/17408)
-   into RAM and jumps to it.  After `reset`, Infix boots from eMMC.
-
-[vero-openwrt]: https://openwrt.org/toh/acer/predator_vero_w6m
-[1]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-vero-w-emmc.img
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r3-emmc-boot-2025.01-latest.tar.gz

board/aarch64/acer-connect-vero-w6m/acer-connect-vero-w6m.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  d48246c717b505cc11df95171f2fd548b389e1a463f1af4c68d0b69fe0d1009b  LICENSE

board/aarch64/acer-connect-vero-w6m/acer-connect-vero-w6m.mk

@@ -1,2 +0,0 @@
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/acer-connect-vero-w6m/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += mediatek/mt7986a-acer-connect-vero-w6m.dtb

board/aarch64/acer-connect-vero-w6m/dts/mediatek/mt7986a-acer-connect-vero-w6m-common.dtsi

@@ -1,425 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/mt65xx.h>
-
-#include <arm64/mediatek/mt7986a.dtsi>
-
-/ {
-	chosen {
-		stdout-path = "serial0:115200n8";
-                infix {
-                        /* Default admin user password: 'admin' */
-                        factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-                };
-	};
-
-	memory@40000000 {
-		reg = <0 0x40000000 0 0x20000000>;
-		device_type = "memory";
-	};
-
-	reg_1p8v: regulator-1p8v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	reg_5v: regulator-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		factory {
-			label = "factory";
-			linux,code = <KEY_RESTART>;
-			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&pio {
-	wifi_rst_hog: wifi-reset-hog {
-		gpio-hog;
-		gpios = <6 GPIO_ACTIVE_LOW>;
-		output-low;
-		line-name = "wifi-reset";
-	};
-
-	mmc0_pins_default: mmc0-pins {
-		mux {
-			function = "emmc";
-			groups = "emmc_51";
-		};
-
-		conf-cmd-dat {
-			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;	/* pull-up 10K */
-		};
-
-		conf-clk {
-			pins = "EMMC_CK";
-			drive-strength = <MTK_DRIVE_6mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;	/* pull-down 50K */
-		};
-
-		conf-ds {
-			pins = "EMMC_DSL";
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;	/* pull-down 50K */
-		};
-
-		conf-rst {
-			pins = "EMMC_RSTB";
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;	/* pull-up 10K */
-		};
-	};
-
-	mmc0_pins_uhs: mmc0-uhs-pins {
-		mux {
-			function = "emmc";
-			groups = "emmc_51";
-		};
-
-		conf-cmd-dat {
-			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-			input-enable;
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;	/* pull-up 10K */
-		};
-
-		conf-clk {
-			pins = "EMMC_CK";
-			drive-strength = <MTK_DRIVE_6mA>;
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;	/* pull-down 50K */
-		};
-
-		conf-ds {
-			pins = "EMMC_DSL";
-			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;	/* pull-down 50K */
-		};
-
-		conf-rst {
-			pins = "EMMC_RSTB";
-			drive-strength = <MTK_DRIVE_4mA>;
-			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;	/* pull-up 10K */
-		};
-	};
-
-	pcie_pins: pcie-pins {
-		mux {
-			function = "pcie";
-			groups = "pcie_pereset";
-		};
-	};
-
-	wf_2g_5g_pins: wf_2g_5g-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_2g", "wf_5g";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-			       "WF1_TOP_CLK", "WF1_TOP_DATA";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-
-	wf_dbdc_pins: wf-dbdc-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_dbdc";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-				"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-				"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-				"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-				"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-				"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-				"WF1_TOP_CLK", "WF1_TOP_DATA";
-			drive-strength = <MTK_DRIVE_4mA>;
-		};
-	};
-
-	i2c_pins: i2c-pins {
-		mux {
-			function = "i2c";
-			groups = "i2c";
-		};
-	};
-};
-
-&trng {
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c_pins>;
-	status = "okay";
-};
-
-&mmc0 {
-	status = "okay";
-	pinctrl-names = "default", "state_uhs";
-	pinctrl-0 = <&mmc0_pins_default>;
-	pinctrl-1 = <&mmc0_pins_uhs>;
-	bus-width = <0x08>;
-	max-frequency = <200000000>;
-	cap-mmc-highspeed;
-	mmc-hs200-1_8v;
-	mmc-hs400-1_8v;
-	hs400-ds-delay = <0x14014>;
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&reg_1p8v>;
-	non-removable;
-	no-sd;
-	no-sdio;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	card@0 {
-		compatible = "mmc-card";
-		reg = <0>;
-
-		block {
-			compatible = "block-device";
-
-			partitions {
-				block-partition-factory {
-					partname = "factory";
-
-					nvmem: nvmem-layout {
-						compatible = "fixed-layout";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						eeprom_factory_0: eeprom@0 {
-							reg = <0x0 0x1000>;
-						};
-
-						precal_factory_1010: precal@1010 {
-							reg = <0x1010 0x62810>;
-						};
-					};
-				};
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_pins>;
-	num-lanes = <1>;
-	status = "okay";
-
-	slot0: pcie@0,0 {
-		reg = <0x0000 0 0 0 0>;
-		#address-cells = <0x03>;
-		#size-cells = <0x02>;
-
-		pcie_wifi: wifi@0,0 {
-			compatible = "mediatek,mt76";
-			reg = <0x0000 0 0 0 0>;
-		};
-	};
-};
-
-&pcie_phy {
-	status = "okay";
-};
-
-&pcie_port {
-	clocks = <&clk40m>, <&topckgen CLK_TOP_PCIE_PHY_SEL>;
-	clock-names = "ref", "da_ref";
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "2500base-x";
-
-		fixed-link {
-			speed = <2500>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch: switch@1f {
-			compatible = "mediatek,mt7531";
-			reg = <31>;
-			reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				swport0: port@0 {
-					reg = <0>;
-					phy-handle = <&swphy0>;
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-					phy-handle = <&swphy1>;
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-					phy-handle = <&swphy2>;
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-					phy-handle = <&swphy3>;
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "2500base-x";
-
-					fixed-link {
-						speed = <2500>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				swphy0: phy@0 {
-					reg = <0>;
-
-					mediatek,led-config = <
-						0x21 0x8008 /* BASIC_CTRL */
-						0x22 0x0c00 /* ON_DURATION */
-						0x23 0x1400 /* BLINK_DURATION */
-						0x24 0xc001 /* LED0_ON_CTRL */
-						0x25 0x0003 /* LED0_BLINK_CTRL */
-						0x26 0xc006 /* LED1_ON_CTRL */
-						0x27 0x003c /* LED1_BLINK_CTRL */
-					>;
-				};
-
-				swphy1: phy@1 {
-					reg = <1>;
-
-					mediatek,led-config = <
-						0x21 0x8008 /* BASIC_CTRL */
-						0x22 0x0c00 /* ON_DURATION */
-						0x23 0x1400 /* BLINK_DURATION */
-						0x24 0xc001 /* LED0_ON_CTRL */
-						0x25 0x0003 /* LED0_BLINK_CTRL */
-						0x26 0xc006 /* LED1_ON_CTRL */
-						0x27 0x003c /* LED1_BLINK_CTRL */
-					>;
-				};
-
-				swphy2: phy@2 {
-					reg = <2>;
-
-					mediatek,led-config = <
-						0x21 0x8008 /* BASIC_CTRL */
-						0x22 0x0c00 /* ON_DURATION */
-						0x23 0x1400 /* BLINK_DURATION */
-						0x24 0xc001 /* LED0_ON_CTRL */
-						0x25 0x0003 /* LED0_BLINK_CTRL */
-						0x26 0xc006 /* LED1_ON_CTRL */
-						0x27 0x003c /* LED1_BLINK_CTRL */
-					>;
-				};
-
-				swphy3: phy@3 {
-					reg = <3>;
-
-					mediatek,led-config = <
-						0x21 0x8008 /* BASIC_CTRL */
-						0x22 0x0c00 /* ON_DURATION */
-						0x23 0x1400 /* BLINK_DURATION */
-						0x24 0xc001 /* LED0_ON_CTRL */
-						0x25 0x0003 /* LED0_BLINK_CTRL */
-						0x26 0xc006 /* LED1_ON_CTRL */
-						0x27 0x003c /* LED1_BLINK_CTRL */
-					>;
-				};
-			};
-		};
-	};
-};
-
-&wifi {
-	nvmem-cells = <&eeprom_factory_0>, <&precal_factory_1010>;
-	nvmem-cell-names = "eeprom", "precal";
-	pinctrl-names = "default", "dbdc";
-	pinctrl-0 = <&wf_2g_5g_pins>;
-	pinctrl-1 = <&wf_dbdc_pins>;
-	status = "okay";
-};

board/aarch64/acer-connect-vero-w6m/dts/mediatek/mt7986a-acer-connect-vero-w6m-factory-eeprom.dtsi

@@ -1,263 +0,0 @@
-/* Factory EEPROM for MT7976 WMAC (DBDC) - Acer Connect Vero W */
-/* Band 1 patched from 5GHz-only to 5GHz+6GHz selectable */
-
-&wifi {
-	mediatek,eeprom-data = <
-		 0x86790100 0x000c4326 0x60100000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x01000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000800 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
- 		 0x12525353 0x003c003f 0x3a100700 0x15030000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x0000be00 0x00000000
-		 0x0000c100 0x00000000 0x00000000 0xc3000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000009 0x00000000 0x00000000
-		 0x00000000 0x00000303 0x03030303 0x03030303
-		 0x03030303 0x03030303 0x03040303 0x03040303
-		 0x03040303 0x03040000 0x00161b18 0x1b1a1a1a
-		 0x1a0d0008 0x0f0d0209 0x0e0d0209 0x0e0d0209
-		 0x0e0c020a 0x0e0c020a 0x0e0c020a 0x0e0b020b
-		 0x0e2b2b2b 0x2b222222 0x22222222 0x22222222
-		 0x22222222 0x22222222 0x22000000 0x00000000
-		 0x00000000 0x002a2a2a 0x2a282828 0x282a2a2a
-		 0x2a282828 0x282a2a2a 0x2a282828 0x282a2a2a
-		 0x2a282828 0x28000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x007f7f20 0x2530363c 0x41014847 0x4c52575c
-		 0x7f7f7f7f 0x1b222a33 0x3a40014d 0x464c525a
-		 0x5e7f7f7f 0x7f252834 0x3c424a01 0x4a4f555d
-		 0x636e7f7f 0x7f7f202a 0x303b444a 0x014a5158
-		 0x5f666e7f 0x7f7f7f7f 0x8080c5c5 0xd1d1dddd
-		 0xe5e5f3f3 0x40408080 0xcfcfdbdb 0xe3e3efef
-		 0xf7f74040 0x8080bfbf 0xcbcbd9d9 0xe5e5eded
-		 0x40408080 0xb9b9c5c5 0xd3d3dfdf 0xe7e74040
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0xc0a0c0e0 0xfcfcafe0 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x02200220 0x02200220 0x02300230 0x02300230
-		 0x02300230 0x02300230 0x02300230 0x02300230
-		 0x02240224 0x02240224 0x02240224 0x02240224
-		 0x02240224 0x02240224 0x02240224 0x02240224
-		 0x000000c4 0xc4c4c4c4 0x0000c4c4 0xc4c4c1c1
-		 0x008282c3 0xc3000000 0x00838300 0xc4c4c4c1
-		 0xc1008282 0x8383c3c3 0xc2c10000 0x83838484
-		 0xc4c4c4c1 0xc1008282 0x8383c4c4 0xc4c1c100
-		 0x82828383 0xc4c4c4c1 0xc1008282 0x8383c4c4
-		 0xc3c100c4 0x81c4c3c2 0x00818181 0xc4c4c3c2
-		 0x00818282 0x00c4c4c2 0xc2008182 0x8200c4c4
-		 0xc3c20081 0x82828484 0xc4c4c3c2 0x00818282
-		 0x8484c4c4 0xc2c20081 0x82828484 0xc4c4c2c1
-		 0x81828383 0x8585c4c4 0xc3c20081 0x82828484
-		 0xc4c4c3c2 0x00818282 0x8484c4c4 0xc3c20081
-		 0x82828484 0xc6c5c3c1 0x00c5c5c3 0xc2008182
-		 0x828484c5 0xc5c3c200 0x81828284 0x84c4c4c3
-		 0xc2008182 0x828484c4 0xc4c2c181 0x82838385
-		 0x85c5c5c3 0xc2008182 0x828484c5 0xc5c3c200
-		 0x81828284 0x84c5c5c3 0xc2008182 0x82848400
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x378a6e05 0x0ae64a6c 0x00000000 0x50050000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00b40000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x86828786 0x87c8cb8a 0x8380c982 0x00c8ca86
-		 0x8383c583 0x83c1c58c 0x8883c78b 0x8780c28c
-		 0x8485c682 0xc3c4c4c4 0xc5c6c7c8 0xcfcecdcc
-		 0xcccdcec1 0xc1c1c1c2 0xc4c6c7ce 0xcecfcfcf
-		 0xcecec6c7 0xc8c9caca 0xcbcbd2d2 0xd2d2d0ce
-		 0xcc8100c1 0xc3c5c6c7 0xc8d0d0d1 0xd1d1d0cf
-		 0xdeee6be7 0x5fede2eb 0xce08ce09 0xce0ace0a
-		 0x4e0b4f0b 0x4f0c4f0c 0x4f0d4f0d 0x540a540b
-		 0x540c540b 0x540c510a 0x510b510c 0xd10c510d
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0xde0fde10 0xde115e12
-		 0xde12de12 0xde135e14 0x5e0cde0d 0xde0e5e10
-		 0x5e105e10 0x5e11de11 0xde0ede0f 0xde10de11
-		 0x5e12de12 0x5e135e13 0xde0f5e11 0x5e12de13
-		 0x5e13de13 0xde14de14 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00848484 0x84848484 0x84000000 0x00e4d5d4
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-	>;
-};

board/aarch64/acer-connect-vero-w6m/dts/mediatek/mt7986a-acer-connect-vero-w6m-pcie-eeprom.dtsi

@@ -1,263 +0,0 @@
-/* Factory EEPROM for PCIe MT7916 radio - Acer Connect Vero W */
-/* Offset 0xa0000 in the "factory" GPT partition on eMMC */
-
-&pcie_wifi {
-	mediatek,eeprom-data = <
-		 0x16790000 0x000c4326 0x60000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x50750000 0x07670700 0x00000400 0x50710000
-		 0x00000000 0x00000400 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0xb101e748 0xf57f5e99
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000800 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
- 		 0x12924848 0x003e003f 0x3a100000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x81a3a380
-		 0xa4910091 0x00910091 0x00910000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x000a0000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x0000c500 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000013 0x12120000 0x00000000
-		 0x00000000 0x00000303 0x03030303 0x03030303
-		 0x03030303 0x03030505 0x05050505 0x05050505
-		 0x05050505 0x05050000 0x001b1919 0x19181818
-		 0x180f0006 0x1c0e080a 0x170e080a 0x170d0809
-		 0x170d020a 0x0e0d020a 0x0e0d020a 0x0e0b020a
-		 0x0e22222c 0x2c2b2b2b 0x2b2b2b2b 0x2b2b2b2b
-		 0x2b2b2b2b 0x2b2b2b2b 0x2b000000 0x00000000
-		 0x00000000 0x001e201e 0x201e2020 0x201e201e
-		 0x20201e20 0x20272929 0x29272727 0x27272929
-		 0x29272727 0x27000000 0x00000000 0x00000000
-		 0x00000000 0x00cdcfcf 0xcfcfcf00 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x007f7f20 0x2530363c 0x41014347 0x4c52575c
-		 0x7f7f0000 0x00000000 0x00000000 0x00000000
-		 0x0000007f 0x7f252834 0x3c424a01 0x4d4f555f
-		 0x636e7f7f 0x7f7f202a 0x303b444a 0x014d5158
-		 0x5f666e7f 0x7f7f7f7f 0x8080c5c5 0xcbcbd9d9
-		 0xe1e1ebeb 0x40408080 0xcfcfdbdb 0xe3e3efef
-		 0xf7f74040 0x8080c1c1 0xcdcdd5d5 0xe1e1eded
-		 0x40408080 0xbbbbc7c7 0xcfcfdbdb 0xe7e74040
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0xb0900000 0x0000c0f0 0xf8000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x02000200 0x02000200 0x02000200 0x02000200
-		 0x02000200 0x02000200 0x02000200 0x02000200
-		 0x02000200 0x02000200 0x02000200 0x02000200
-		 0x02000200 0x02000200 0x02000200 0x02000200
-		 0x000000c6 0xc6c6c6c4 0x0000c5c5 0xc5c4c1c1
-		 0x818383c3 0xc3c2c100 0x81848400 0xc5c5c4c1
-		 0xc1818383 0x8585c3c3 0xc2c10081 0x84848686
-		 0xc5c5c4c1 0xc1818383 0x8585c5c5 0xc4c1c181
-		 0x83838585 0xc5c5c4c1 0xc1818383 0x8585c6c6
-		 0xc4c300c6 0x00c6c4c3 0xc1008181 0xc6c6c4c3
-		 0xc1008181 0x00c5c5c3 0xc2008182 0x8200c6c6
-		 0xc4c3c100 0x81818686 0xc6c6c4c3 0xc1008181
-		 0x8686c5c5 0xc3c20081 0x82828787 0xc5c5c3c2
-		 0x00818282 0x8787c6c6 0xc4c3c100 0x81818686
-		 0xc6c6c4c3 0xc1008181 0x8686c6c6 0xc4c3c100
-		 0x81818686 0xc6c6c4c3 0x00c6c6c4 0xc3c10081
-		 0x818686c6 0xc6c4c3c1 0x00818186 0x86c5c5c3
-		 0xc2008182 0x828787c5 0xc5c3c281 0x82838388
-		 0x88c6c6c4 0xc3c10081 0x818686c6 0xc6c4c3c1
-		 0x00818186 0x86c6c6c4 0xc3c10081 0x81868600
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00b70000 0x00b70000 0x00000000 0x00000000
-		 0x01000000 0x0000c400 0xb8008700 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0xc7c60000 0x89898987 0x87858381 0x898a8b8b
-		 0x8a898785 0x88898988 0x87868584 0x00000000
-		 0x00000000 0xcccfcecd 0xcdcacecd 0xcbcfcece
-		 0xcfcfcfc7 0xcececdce 0xc7cfcec7 0xcfcfcfcf
-		 0xcfcf0000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x7fe2f0e4 0x00000000 0xa4de24df 0xa4e0a4e1
-		 0xa4e1a4de 0x24dfa4e0 0xa4e1a4e1 0xa4dea4df
-		 0xa4e0a4e1 0xa4e1a4de 0xa4df24e0 0xa4e1a4e1
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0xde0fde0f 0xde0fde10
-		 0xde11de11 0x5e12de12 0xde10de10 0xde10de11
-		 0xde12de12 0xde13de13 0x5a085a09 0x5a0a5a0a
-		 0x5a0a5a0a 0x5a0a5a0a 0x5a055a06 0x5a075a08
-		 0x5a085a09 0x5a095a09 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00ded453
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-		 0x00000000 0x00000000 0x00000000 0x00000000
-	>;
-};

board/aarch64/acer-connect-vero-w6m/dts/mediatek/mt7986a-acer-connect-vero-w6m.dts

@@ -1,63 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-/dts-v1/;
-#include "mt7986a-acer-connect-vero-w6m-common.dtsi"
-#include "mt7986a-acer-connect-vero-w6m-pcie-eeprom.dtsi"
-
-/ {
-	model = "Acer Connect Vero W6m";
-	compatible = "acer,connect-vero-w", "mediatek,mt7986a";
-
-	aliases {
-		serial0 = &uart0;
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
-	};
-};
-
-&i2c0 {
-	led-controller@30 {
-		compatible = "kinetic,ktd2026";
-		reg = <0x30>;
-		vin-supply = <&reg_5v>;
-		vio-supply = <&reg_3p3v>;
-
-		led_status: multi-led {
-			color = <LED_COLOR_ID_RGB>;
-			function = LED_FUNCTION_STATUS;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@0 {
-				reg = <0>;
-				color = <LED_COLOR_ID_RED>;
-			};
-
-			led@1 {
-				reg = <1>;
-				color = <LED_COLOR_ID_GREEN>;
-			};
-
-			led@2 {
-				reg = <2>;
-				color = <LED_COLOR_ID_BLUE>;
-			};
-		};
-	};
-};
-
-&nvmem {
-	eeprom_factory_a0000: eeprom@a0000 {
-		reg = <0xa0000 0x1000>;
-	};
-
-	precal_factory_a1010: precal@a1010 {
-		reg = <0xa1010 0x62810>;
-	};
-};
-
-&swport0 {
-       label = "internet";
-};

board/aarch64/acer-connect-vero-w6m/genimage.cfg.in

@@ -1,86 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-vero-w-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-                gpt-no-backup = true
-        }
-
-        /*
-         * Factory partitions (1-4) -- secure boot, do not overwrite.
-         * Offsets and sizes match the stock Acer GPT exactly.
-         * No image data is written, preserving factory content.
-         */
-        partition u-boot-env {
-                offset = 8192s
-                size = 1024s
-        }
-
-        partition factory {
-                offset = 9216s
-                size = 4096s
-        }
-
-        partition fip {
-                offset = 13312s
-                size = 4096s
-        }
-
-        /* Infix U-Boot, chainloaded by stock bootloader */
-        partition infix-uboot {
-                offset = 17408s
-                image = "u-boot.bin"
-                size = 32M
-        }
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/acer-connect-vero-w6m/rootfs/usr/share/product/acer,connect-vero-w/etc/factory-config.cfg

@@ -1,488 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "2.4GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio1",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "6GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio2",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "internet",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Acer Connect Vero W"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix6G",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi2-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio2",
-          "access-point": {
-            "ssid": "Infix5G",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "acer-connect-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "internet"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/alder-alder/alder-alder.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  d2f96418893ac66156d0e691cda189b0d85ae1d814065d1d9aa1845383100f46  LICENSE

board/aarch64/bananapi-bpi-r3/Config.in

@@ -1,12 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R3
-	bool "Banana Pi R3"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7986
-	select BR2_PACKAGE_LINUX_FIRMWARE_AIROHA_EN8811H
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7916
-	select SDCARD_AUX
-	help
-	  Build Banana PI R3 support

board/aarch64/bananapi-bpi-r3/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/bananapi-bpi-r3/README.md

@@ -1,275 +0,0 @@
-# Banana Pi BPI-R3 / BPI-R3 Mini
-
-<img src="bananapi-bpi-r3.webp" alt="The board" width=800 padding=10>
-
-## Overview
-
-The Banana Pi BPI-R3 and BPI-R3 Mini are high-performance networking
-boards with full Infix support for all enabled features including
-Ethernet, WiFi, and SFP interfaces.
-
-Both boards share the same SoC and most peripherals.  The key
-differences are:
-
-| Feature         | BPI-R3             | BPI-R3 Mini             |
-|-----------------|--------------------|-------------------------|
-| Ethernet switch | Yes (4x LAN + WAN) | No (WAN/LAN ports only) |
-| SD card slot    | Yes                | No                      |
-
-### Hardware Features
-
-- MediaTek MT7986 ARM Cortex-A53 quad-core processor @ 2.0 GHz
-- 2 GB DDR4 RAM
-- 8 GB eMMC storage
-- microSD card slot (BPI-R3 only)
-- 5x Gigabit Ethernet ports with switch core (BPI-R3 only)
-- 2x SFP cages for fiber connectivity (1G/2.5G) (BPI-R3 only)
-- Dual-band WiFi (2.4 GHz + 5 GHz)
-- USB 3.0 port
-- Mini PCIe slot
-
-### Default Network Configuration
-
-Infix comes preconfigured with:
-
-- **LAN ports** (lan1-lan4): Bridged for internal networking (BPI-R3 only)
-- **WAN port**: DHCP client enabled for internet connectivity
-- **SFP ports** (sfp1, sfp2): Available for configuration (BPI-R3 only)
-- **WiFi interfaces** (wifi0, wifi1): Available for configuration
-
-## Getting Started
-
-### BPI-R3: Quick Start with SD Card
-
-The easiest way to get started with the BPI-R3 is using an SD card:
-
-> [!NOTE]
-> SD card boot works but we have observed stability issues. For production
-> use or long-term reliability, we recommend installing to eMMC (see below).
-
-1. **Download the SD card image:** [infix-bpi-r3-sdcard.img][2]
-2. **Flash the image to an SD card:** see [this guide][0]
-3. **Set boot switches:**
-   - Set DIP switches to **0000** (SD card boot mode)
-   - Switch positions are on the underside of the board near the SD slot
-4. **Boot the board:**
-   - Insert the SD card
-   - Connect power
-   - Connect to LAN port or console (115200 8N1)
-   - Default login: `admin` / `admin`
-
-### BPI-R3 Mini: Getting Started
-
-The BPI-R3 Mini does not have an SD card slot, so you must install
-directly to eMMC.  See [Installing to eMMC — BPI-R3
-Mini](#bpi-r3-mini) below.
-
-### Boot Switch Reference
-
-The BPI-R3 has a 4-position DIP switch that controls boot media:
-
-<img align="right" src="bootstrap-switch.webp" alt="DIP switches" width=200 padding=10>
-
-| ABCD | Mode     | Description                           |
-|------|----------|---------------------------------------|
-| 0000 | SD card  | Boot from microSD card                |
-| 0101 | SPI NAND | Boot from SPI NAND (advanced users)   |
-| 1001 | eMMC     | Boot from internal eMMC (recommended) |
-
-> [!NOTE]
-> Switch position is read from left to right: "0" = OFF, "1" = ON.
-> When the DIP switch is in the "UP" position it is OFF(0).
-
-## Installing to eMMC
-
-For production deployments or better performance, you can install Infix
-to the internal eMMC storage.
-
-> [!IMPORTANT]
-> While Infix boots on both SD card and eMMC on the BPI-R3, we have
-> observed stability issues with SD cards on this platform. **eMMC is
-> recommended** for reliable operation.
-
-### Prerequisites
-
-- FTDI USB-to-serial cable (3.3V) for console access
-- USB flash drive (FAT32 formatted)
-- microSD card with Infix, for initial boot (BPI-R3 only)
-- Downloaded files (see below)
-
-### Required Files
-
-Download and place these files on a FAT32-formatted USB drive:
-
-1. **Infix eMMC image:**
-   - [infix-bpi-r3-emmc.img][3] (Complete system image)
-2. **eMMC bootloader** (extracted from):
-   - [bpi-r3-emmc-boot-2025.01-latest.tar.gz][4]
-   - Extract `bl2.img` from the tarball to your USB drive
-3. **Intermediate NAND bootloader** (BPI-R3 only, from Frank-W's U-Boot):
-   - [bpi-r3_spim-nand_bl2.img][5] (BL2 loader)
-   - [bpi-r3_spim-nand_fip.bin][6] (FIP image)
-
-> [!WARNING]
-> The following process involves multiple boot mode changes.  Take your
-> time and verify each step carefully.
-
-### BPI-R3
-
-#### Step 1: Boot from SD card
-
-1. Set boot switches to **0000** (SD card mode)
-2. Insert SD card with Infix
-3. Power on and break into U-Boot (press Ctrl-C during boot)
-
-#### Step 2: Flash intermediate NAND bootloader
-
-This step installs a temporary bootloader to NAND that will help us
-flash the eMMC. From the U-Boot prompt:
-
-```
-usb start
-mtd erase spi-nand0
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_bl2.img
-mtd write spi-nand0 0x50000000 0x0 0x100000
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_fip.bin
-mtd write spi-nand0 0x50000000 0x380000 0x200000
-```
-
-#### Step 3: Boot from NAND
-
-1. Power off the board
-2. Set boot switches to **1010** (NAND mode)
-3. Power on - you should boot into U-Boot again
-
-#### Step 4: Write Infix image to eMMC
-
-From the U-Boot prompt:
-
-```
-usb start
-fatload usb 0:1 0x50000000 infix-bpi-r3-emmc.img
-setexpr blocks ${filesize} / 0x200
-mmc dev 0
-mmc write 0x50000000 0x0 ${blocks}
-```
-
-This writes the complete Infix system (partitions, rootfs, etc.) to eMMC.
-
-#### Step 5: Configure eMMC boot
-
-Now configure the eMMC boot partition and write the bootloader:
-
-```
-mmc partconf 0 1 1 1
-mmc erase 0x0 0x400
-fatload usb 0:1 0x50000000 bl2.img
-mmc write 0x50000000 0x0 0x400
-mmc partconf 0 1 1 0
-```
-
-#### Step 6: Boot from eMMC
-
-1. Power off the board
-2. Set boot switches to **0110** (eMMC mode)
-3. Remove SD card (optional, but recommended to verify eMMC boot)
-4. Power on
-
-Your BPI-R3 should now boot Infix from internal eMMC storage!
-
-### BPI-R3 Mini
-
-The BPI-R3 Mini does not have an SD card slot, so you have to go
-through the factory-installed Linux (OpenWRT) to flash the Infix
-bootloader and OS to eMMC.
-
-#### Step 1: Boot from NAND (factory default)
-
-<img src="r3mini_nandboot2.png" alt="BPI-R3 Mini NAND boot switch position" width=400>
-
-1. Ensure boot switches are set to NAND mode (factory default)
-2. Place `infix-bpi-r3-emmc.img` and `bl2.img` on a USB drive
-3. Power on and boot into Linux
-4. Mount the USB drive to `/mnt`
-
-#### Step 2: Flash Infix to eMMC
-
-From the Linux shell:
-
-```
-echo 0 > /proc/sys/kernel/printk
-dd if=/mnt/infix-bpi-r3-emmc.img of=/dev/mmcblk0
-echo 0 > /sys/block/mmcblk0boot0/force_ro
-dd if=/mnt/bl2.img of=/dev/mmcblk0boot0
-sync
-```
-
-#### Step 3: Boot from eMMC
-
-<img src="r3mini_emmcboot.png" alt="BPI-R3 Mini eMMC boot switch position" width=400>
-
-1. Power off the board
-2. Set boot switches to eMMC mode (see image above)
-3. Power on
-
-
-## Troubleshooting
-
-### Board won't boot
-
-- Verify boot switch positions (check twice!)
-- Ensure power supply provides adequate current (12V/2A recommended)
-- Try booting from SD card with switches at **0000** (BPI-R3 only)
-
-### Can't break into U-Boot
-
-- Ensure serial console is connected properly (115200 8N1, 3.3V)
-- Press Ctrl-C immediately when you see boot messages
-- Try power cycling and pressing Ctrl-C repeatedly
-
-### eMMC boot fails after installation
-
-- Boot from NAND (**1010**) and verify eMMC image was written
-- Check USB drive contents - ensure all files are present
-- Re-run the eMMC boot configuration step
-
-### Reverting to SD card (BPI-R3 only)
-
-Simply set boot switches back to **0000** and boot from SD card. The
-eMMC installation does not affect SD card functionality.
-
-## Additional Resources
-
-- [Infix Documentation][1]
-- [Official BPI-R3 Wiki][7]
-- [Release Downloads][8]
-
-## Building Custom Images
-
-See the main Infix documentation for building from source. To build both
-SD card and eMMC images locally:
-
-```bash
-# Build bootloaders for both SD and eMMC
-make x-bpi-r3-sd-boot
-make x-bpi-r3-emmc-boot
-
-# Build main system
-make aarch64
-
-# Create SD card image
-./utils/mkimage.sh -od bananapi-bpi-r3
-
-# Create eMMC image
-./utils/mkimage.sh -odt emmc bananapi-bpi-r3
-```
-
-[0]: https://www.kernelkit.org/posts/flashing-sdcard/
-[1]: https://www.kernelkit.org/infix/latest/
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-sdcard.img
-[3]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-emmc.img
-[4]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r3-emmc-boot-2025.01-latest.tar.gz
-[5]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_bl2.img
-[6]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_fip.bin
-[7]: https://wiki.banana-pi.org/Banana_Pi_BPI-R3
-[8]: https://github.com/kernelkit/infix/releases/tag/latest-boot

board/aarch64/bananapi-bpi-r3/bananapi-bpi-r3.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  dbe4eae8debbba8135297e15f24aeefef0b4c03781f3f9328db4398d58a728b3  LICENSE

board/aarch64/bananapi-bpi-r3/bananapi-bpi-r3.mk

@@ -1,37 +0,0 @@
-define BANANAPI_BPI_R3_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-	$(call KCONFIG_SET_OPT,CONFIG_AIR_EN8811H_PHY,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_HSDMA)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MT798X_WMAC)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_SOC_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_MT6380,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/bananapi-bpi-r3/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += mediatek/mt7986a-bananapi-bpi-r3-sd.dtb mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb mediatek/mt7986a-bananapi-bpi-r3-mini.dtb

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtsi

@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-        bus-width = <8>;
-        max-frequency = <200000000>;
-        cap-mmc-highspeed;
-        mmc-hs200-1_8v;
-        mmc-hs400-1_8v;
-        hs400-ds-delay = <0x14014>;
-        non-removable;
-        no-sd;
-        no-sdio;
-        status = "okay";
-
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        card@0 {
-                compatible = "mmc-card";
-                reg = <0>;
-
-                partitions {
-                        compatible = "gpt-partitions";
-
-                        partition-factory {
-                                partname = "factory";
-
-                                nvmem-layout {
-                                        compatible = "fixed-layout";
-                                        #address-cells = <1>;
-                                        #size-cells = <1>;
-
-                                        eeprom_factory_wmac: eeprom@0 {
-                                                reg = <0x0 0x1000>;
-                                        };
-
-                                        eeprom_factory_pcie: eeprom@a0000 {
-                                                reg = <0xa0000 0x1000>;
-                                        };
-                                };
-                        };
-                };
-        };
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts

@@ -1,12 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"
-
-&phy0 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-&phy1 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dtsi

@@ -1,2 +0,0 @@
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-sd.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtsi

@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-	bus-width = <4>;
-	max-frequency = <52000000>;
-	cap-sd-highspeed;
-	status = "okay";
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi

@@ -1,84 +0,0 @@
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb>;
-			usb-port-names = "USB";
-		};
-	};
-};
-/*
-From 236317dd4e55512933dcdaec3d0b4a0824f5e5bd Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66@outlook.com>
-Date: Sun, 10 Aug 2025 18:11:01 +0800
-Subject: [PATCH] arm64: dts: mediatek: mt7986: increase ATF reserved memory to
- 256 kiB
-
-The latest Mediatek open-source Trusted Firmware-A project has
-reserved 256 KiB for BL2 and BL31. It is better to increase the
-reserved memory region in the Linux kernel to protect the data.
-
-https://github.com/openwrt/openwrt/blob/main/target/linux/mediatek/patches-6.12/199-arm64-dts-mediatek-mt7986-increase-ATF-reserved-memo.patch
-*/
-&secmon_reserved {
-	reg = <0 0x43000000 0 0x40000>;
-};
-/*
- * The T-PHY's pcie-phy sub-node only claims clk40m ("ref") in the SoC
- * dtsi.  CLK_TOP_PCIE_PHY_SEL ("da_ref") is left unclaimed, so the
- * kernel's clk_disable_unused late_initcall gates it — killing the
- * PCIe REFCLK output to the endpoint mid-probe.  Wire it here so the
- * clock stays enabled while the PHY is active.
- */
-&pcie_port {
-	clocks = <&clk40m>, <&topckgen CLK_TOP_PCIE_PHY_SEL>;
-	clock-names = "ref", "da_ref";
-};
-
-&cpu_thermal {
-	/delete-node/ trips;
-	/delete-node/ cooling-maps;
-	trips {
-		cpu_trip_active_cool: cpu-trip-active-cool {
-			temperature = <40000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_low: cpu-trip-active-low {
-			temperature = <45000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_med: cpu-trip-active-med {
-			temperature = <60000>;   // 60°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_hot: cpu-trip-hot {
-			temperature = <80000>;   // 80°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "hot";
-		};
-		cpu_trip_critical: cpu-trip-critical {
-			temperature = <90000>;   // 90°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map-cpu-40deg {
-			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_active_cool>;
-		};
-		map-cpu-45deg {
-			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
-		};
-		map-cpu-60deg {
-			cooling-device = <&fan 2 2>;
-			trip = <&cpu_trip_active_med>;
-		};
-	};
-};

board/aarch64/bananapi-bpi-r3/genimage.cfg.in

@@ -1,87 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r3-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-#		partition-type = 0x83  # Linux filesystem
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-	partition en8811h_fw {
-		size = 10M
-		image = "en8811h-fw.bin"
-	}
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/factory-config.cfg

@@ -1,480 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "2.4GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio1",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan4",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "sfp1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "sfp2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/product/interface-quirks.json

@@ -1,11 +0,0 @@
-{
-    "sfp1": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    },
-    "sfp2": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    }
-
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/udev/rules.d/90-bpi-r3-rename-eth1.rules

@@ -1 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp1"

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/factory-config.cfg

@@ -1,446 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "2.4GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio1",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/udev/rules.d/90-bpi-r3-mini-rename-ethernet.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth0", NAME="lan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="wan"

board/aarch64/bananapi-bpi-r3/uboot/emmc-extras.config

@@ -1,3 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-emmc-env.dtsi"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_DEVICE=emmc DRAM_USE_DDR4=1 USE_MKIMAGE=1  MKIMAGE=$(HOST_DIR)/bin/mkimage"
-CONFIG_SUPPORT_EMMC_BOOT=y

board/aarch64/bananapi-bpi-r3/uboot/extras.config

@@ -1,45 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_OF_LIST="mt7986a-bpi-r3-sd mt7986a-bpi-r3-emmc mt7986a-bpi-r3-mini mt7986a-acer-connect-vero-w6m"
-
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
-
-CONFIG_MTK_SPIM=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTK_SPIM=y
-CONFIG_MTK_SNOR=y
-
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_PHY_ETHERNET_ID=y
-
-CONFIG_PHY_AIROHA=y
-CONFIG_PHY_AIROHA_EN8811H=y
-CONFIG_PHY_AIROHA_FW_IN_MMC=y
-
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_MDIO=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DM=y

board/aarch64/bananapi-bpi-r3/uboot/mt7986-emmc-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-env.dtsi

@@ -1,29 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       /* After the MMC driver has enabled bus power,
-                        * the controller seems to sometimes detect a
-                        * card removal state , which causes it to
-                        * disable power again. This hack re-enables the
-                        * bus power in those cases.
-                        */
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-		en8811h_fw_part = "0#en8811h_fw";
-		en8811h_fw_dm_dir = "EthMD32.dm.bin";
-		en8811h_fw_dsp_dir = "EthMD32.DSP.bin";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-                       ixbtn-factory = "echo \"No button available, use bootmenu\"";
-               };
-       };
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-sd-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-sd.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/sd-extras.config

@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-sd-env.dtsi"

board/aarch64/bananapi-bpi-r4/Config.in

@@ -1,11 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R4
-	bool "Banana Pi R4"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7988
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7996
-	select SDCARD_AUX
-	help
-	  Build Banana PI R4 support

board/aarch64/bananapi-bpi-r4/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2026 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/bananapi-bpi-r4/README.md

@@ -1,360 +0,0 @@
-# Banana Pi BPI-R4 / BPI-R4-2g5 / BPI-R4P
-
-<img src="banana_pi_bpi-r4_poe.jpg" alt="The board" width=800 padding=10>
-
-## Overview
-
-The Banana Pi BPI-R4 is a high-performance networking board built around the
-MediaTek MT7988A SoC (Filogic 880).  It is a successor to the BPI-R3 and
-represents a significant step up: the CPU switches from in-order Cortex-A53
-cores to out-of-order Cortex-A73 cores, and the MT7531 switch is now part of
-the SOC. The base model comes with two SFP+ cages supporting 1.25/2.5/5/10
-Gbps, and the R4P model comes with one SFP+ cage and one 2.5 Gbps RJ45 jack,
-which with an optional PoE board means the board can act as PD.  Unlike the
-BPi-R3, however, there is no on-board WiFi support, that requires an external
-tri-band WiFi 7 (IEEE 802.11be) card.
-
-### Variants
-
-| **Feature**      | **BPI-R4**       | **BPI-R4-2g5**    | **BPI-R4P**               |
-|------------------|------------------|-------------------|---------------------------|
-| 1G switch ports  | wan, lan1–lan3   | lan0–lan3         | lan0–lan3                 |
-| 2.5G RJ45 (WAN)  | —                | wan               | wan (PoE input)           |
-| SFP+ port(s)     | sfp1, sfp2 (10G) | sfp1 (10G)        | sfp1 (10G)                |
-| Linux DT         | bpi-r4           | bpi-r4-2g5        | bpi-r4-2g5 (same)         |
-
-On the standard BPI-R4 the four 1G switch ports are labeled `wan`, `lan1`, `lan2`,
-and `lan3`.  On the R4-2g5 and R4P, the port that would otherwise be `wan` on the
-switch is relabeled `lan0` via a device tree overlay, since the actual WAN port on
-those variants is the dedicated 2.5G internal PHY on the separate RJ45 jack.
-
-The BPI-R4P is mechanically and electrically identical to the BPI-R4-2g5
-with an additional PoE daughterboard header.  From a Linux kernel and
-Infix perspective the two boards are treated identically.
-
-### SoC: MediaTek MT7988A vs MT7986 (BPI-R3)
-
-The MT7988A (Filogic 880) and MT7986 (Filogic 820) may look similar from
-their part numbers, but they are built on entirely different silicon with
-distinct system architectures:
-
-| **Aspect**       | **MT7988A (BPI-R4)**     | **MT7986 (BPI-R3)**       |
-|------------------|--------------------------|---------------------------|
-| CPU cores        | 4x Cortex-A73 @ 1.8 GHz  | 4x Cortex-A53 @ 2.0 GHz   |
-| CPU architecture | ARMv8-A, out-of-order    | ARMv8-A, in-order         |
-| Internal switch  | 1 Gbps per port          | 1 Gbps per port           |
-| Uplinks          | USXGMII (native 10 Gbps) | USXGMII (native 2.5 Gbps) |
-| WiFi             | MT7996E PCIe module      | MT7915E (built-in)        |
-| WiFi standard    | WiFi 7 (802.11be)        | WiFi 6 (802.11ax)         |
-| WiFi bands       | 2.4 / 5 / 6 GHz          | 2.4 / 5 GHz               |
-| Hardware crypto  | EIP-197 NPU              | EIP-93                    |
-| PCIe slots       | 4 (2x mPCIe, 2x M.2)     | 1 mPCIe                   |
-| Boot ROM offset  | Sector 1024 (0x80000)    | Sector 1024 (0x80000)     |
-
-### Hardware Features
-
-- **SoC:** MediaTek MT7988A (Filogic 880)
-- **CPU:** Quad-core ARM Cortex-A73, up to 1.8 GHz
-- **RAM:** 4 GB DDR4
-- **Storage:** 8 GB eMMC, microSD card slot, SPI NAND flash
-- **Ethernet switch:** 4-port 1 GbE (10/100/1000) internal DSA switch
-- **SFP+ ports:** 2x 10 Gbps USXGMII (standard R4) or 1x SFP+ (R4-2g5/R4P)
-- **WiFi:** optional MediaTek MT7996E PCIe module — tri-band WiFi 7 (2.4/5/6 GHz)
-- **USB:** 1x USB 3.0 (xHCI)
-- **PCIe:** 2x mPCIe (SIM2/SIM3), 1x M.2 Key-B (SIM1), 1x M.2 Key-M (SSD)
-- **RTC:** PCF8563 on I2C
-- **Fan:** PWM-controlled cooling with thermal management
-- **Console:** UART at 115200 8N1 (3.3 V, USB-to-serial adapter required)
-
-### Default Network Configuration
-
-Infix ships with the following factory defaults.
-
-**Standard BPI-R4:**
-
-- **LAN bridge** (`br0`, 192.168.0.1/24): `lan1`, `lan2`, `lan3` (1G switch ports)
-- **WAN port** (`wan`): DHCP client, used for internet uplink (1G switch port)
-- **SFP+ ports** (`sfp1`, `sfp2`): Present but unconfigured
-
-**BPI-R4-2g5 and BPI-R4P:**
-
-- **LAN bridge** (`br0`, 192.168.0.1/24): `lan0`, `lan1`, `lan2`, `lan3` (1G switch ports)
-- **WAN port** (`wan`): DHCP client, used for internet uplink (2.5G internal PHY)
-- **SFP+ port** (`sfp1`): Present but unconfigured
-
-> [!NOTE]
-> If an optional WiFi 7 (MT7996E) PCIe card is installed, the radio interfaces
-> are bridged into the LAN as access points.  WiFi is not included with the board
-> and is not part of the factory default configuration.
-
-
-## Getting Started
-
-<img align="right" src="console-header.png" alt="Console header pins" width=200 padding=10>
-
-### Quick Start with SD Card
-
-1. **Download the SD card image:** [infix-bpi-r4-sdcard.img][2]
-2. **Flash the image to an SD card:** see [this guide][0]
-3. **Set boot switches to SD card mode** (see Boot Switch Reference below)
-4. **Insert the SD card, connect power and a serial console (115200 8N1)**
-5. Default login: `admin` / `admin`
-
-### Boot Switch Reference
-
-<img align="right" src="bootstrap-sw3.png" alt="DIP switches" width=140 padding=10>
-
-The BPI-R4 has a 2-position DIP switch (SW3) that selects the boot media.
-Switch positions are printed on the board near the SD card slot.
-
-| A   | B   | Boot media (SW3) |
-|-----|-----|------------------|
-| OFF | ON  | SPI NAND         |
-| ON  | OFF | eMMC             |
-| ON  | ON  | SD card          |
-
-> [!NOTE]
-> "OFF" = switch in the UP position = logical 0.
-
-## Installing to eMMC
-
-For production use or better reliability, install Infix to the internal
-eMMC storage.
-
-> [!IMPORTANT]
-> The MT7988A has a single MMC controller that can only operate in one mode
-> (SD or eMMC) per boot session.  The SD card U-Boot cannot switch to eMMC
-> mode mid-session, so an intermediate NAND bootloader step is required to
-> write the eMMC — the same approach as BPi-R3.
->
-> The MT7988A boot chain is: **BROM → BL2 → FIP (BL31 + U-Boot)**.  The FIP
-> (Firmware Image Package) bundles ARM Trusted Firmware (BL31) and U-Boot
-> together; it is not just a U-Boot binary.  When BL2 runs, it loads the FIP
-> from a fixed offset and hands off to BL31, which then jumps into U-Boot.
->
-> The factory SPI NAND contains a minimal recovery U-Boot that only supports
-> TFTP — it has no USB command.  You cannot use it to load files from a USB
-> drive.  Similarly, the factory eMMC ships with a basic OpenWRT image.
-> You must first flash a full-featured U-Boot (from Frank-W) to SPI NAND via
-> the SD card U-Boot before you can write the eMMC.
->
-> This process involves three boot mode changes and multiple flash operations.
-> Take your time and verify each step carefully.
-
-### Prerequisites
-
-- USB-to-serial adapter (3.3 V) for console access
-- USB flash drive (FAT32 formatted)
-- microSD card with Infix SD image, for initial boot
-- Downloaded files (see below)
-
-### Required Files
-
-Place these files on a FAT32-formatted USB drive:
-
-1. **Infix eMMC image:** [infix-bpi-r4-emmc.img][3]
-2. **eMMC bootloader** (from): [bpi-r4-emmc-boot-2026.01-latest.tar.gz][4]
-   - Extract `bl2.img` from the tarball to your USB drive
-3. **Intermediate NAND bootloader** from Frank-W's U-Boot (for BPI-R4, SPI NAND):
-   - [bpi-r4_spim-nand_bl2.img][13] — BL2 first-stage loader
-   - [bpi-r4_spim-nand_fip.bin][14] — FIP image (BL31 + U-Boot)
-
-### Step 1: Boot from SD card
-
-1. Set boot switches to **SD card mode** (SW3: A=ON, B=ON)
-2. Insert the SD card with the Infix image
-3. Power on and break into U-Boot (press Ctrl-C during countdown)
-
-### Step 2: Flash intermediate NAND bootloader
-
-This installs a full-featured U-Boot to SPI NAND so the board can load files
-from USB in the next step.  From the SD card U-Boot prompt:
-
-```
-usb start
-mtd erase spi-nand0
-fatload usb 0:1 0x50000000 bpi-r4_spim-nand_bl2.img
-mtd write spi-nand0 0x50000000 0x0 0x100000
-fatload usb 0:1 0x50000000 bpi-r4_spim-nand_fip.bin
-mtd write spi-nand0 0x50000000 0x580000 0x200000
-```
-
-### Step 3: Boot from NAND
-
-1. Power off the board
-2. Set boot switches to **SPI NAND mode** (SW3: A=OFF, B=ON)
-3. Power on — you should boot into U-Boot again
-
-### Step 4: Write Infix image to eMMC
-
-From the U-Boot prompt:
-
-```
-usb start
-fatload usb 0:1 0x50000000 infix-bpi-r4-emmc.img
-setexpr blocks ${filesize} / 0x200
-mmc write 0x50000000 0x0 ${blocks}
-```
-
-### Step 5: Configure eMMC boot partition
-
-Write the BL2 bootloader to the eMMC boot partition:
-
-```
-mmc partconf 0 1 1 1
-mmc erase 0x0 0x400
-fatload usb 0:1 0x50000000 bl2.img
-mmc write 0x50000000 0x0 0x400
-mmc partconf 0 1 1 0
-```
-
-### Step 6: Boot from eMMC
-
-1. Power off the board
-2. Set boot switches to **eMMC mode** (SW3: A=ON, B=OFF)
-3. Remove the SD card (optional, recommended to verify eMMC boot)
-4. Power on
-
-Your BPI-R4 should now boot Infix from internal eMMC storage.
-
-## Troubleshooting
-
-### Board won't boot
-
-- Verify boot switch positions — double-check against the wiki
-- Ensure the power supply provides adequate current (12 V / 3 A recommended)
-- Check the serial console output at 115200 8N1
-
-### Can't break into U-Boot
-
-- Connect the serial console before powering on
-- Press Ctrl-C immediately when boot messages appear
-- Try power cycling and pressing Ctrl-C repeatedly during the countdown
-
-### eMMC boot fails after installation
-
-- Boot from NAND (SW3=ON) and verify the eMMC write completed without errors
-- Re-run the `mmc partconf` sequence — a missed step is the most common
-  cause of failure
-- Use `mmc info` to confirm the eMMC is detected
-
-### No network connectivity
-
-The interface names on BPI-R4 differ from BPI-R3.  Confirm what Linux
-has created with `ip link` and compare with the factory configuration:
-
-- `wan`, `lan1`–`lan3`: 1G switch ports (standard R4)
-- `wan`, `lan0`–`lan3`: on R4-2g5/R4P, `wan` is the 2.5G internal PHY; `lan0`–`lan3` are 1G switch ports
-- `sfp1` (and `sfp2` on standard R4): 10G SFP+ cage(s)
-
-If interface renames look wrong, check `dmesg | grep renamed` and if
-you spot any errors, please report as an issue to the Infix tracker
-on GitHub.
-
-## Board Variants
-
-### BPI-R4
-
-The base model BPi-R4 ports look like this, the `wan` port is the same physical
-switch port as `lan0` on the R4-2g5/R4P, but here it serves as the WAN port in
-the factory default configuration.
-
-```
-.-.
-| |                      .-----.-----.-----.-----.
-| |   _______   _______  |     |     |     |     | .---.
-| |  |       | |       | |     |     |     |     | |   | .-----.
-'-'  '-------' '-------' '-----'-----'-----'-----' '---' '-----'
-USB1    sfp1      sfp2     wan  lan1  lan2  lan3   DC12V  PD20V
-```
-
-### BPI-R4-2g5 and BPI-R4P
-
-These variants substitute one SFP+ cage for an internal 2.5 Gbps PHY
-connected to a standard RJ45 jack.  From a kernel perspective they use
-the `mt7988a-bananapi-bpi-r4-2g5` device tree.
-
-The BPI-R4P additionally supports an optional PoE input daughterboard on
-the 2.5 Gbps RJ45 port.  The PoE circuitry is passive with respect to
-Linux — no special kernel driver is required for basic operation.
-
-For these board variants, the WAN role moves to the dedicated 2.5G internal PHY,
-so all four switch ports become LAN ports (`lan0`–`lan3`) instead of three:
-
-```
-.-.
-| |            .-----.   .-----.-----.-----.-----.
-| |   _______  |     |   |     |     |     |     | .---.
-| |  |       | |     |   |     |     |     |     | |   | .-----.
-'-'  '-------' '-----'   '-----'-----'-----'-----' '---' '-----'
-USB1    sfp1     wan      lan0  lan1  lan2  lan3   DC12V  PD20V
-```
-
-### Selecting the Board Variant
-
-U-Boot cannot automatically distinguish the standard R4 from the R4-2g5/R4P at
-boot time (the on-board EEPROM is not programmed from factory).  Instead, the
-variant is read from the persistent U-Boot environment on the `aux` partition,
-and you have to set it manually using `fw_setenv` from a UNIX shell:
-
-```bash
-# For BPI-R4-2g5 or BPI-R4P (1x SFP+ + 1x 2.5 Gbps RJ45):
-sudo fw_setenv BOARD_VARIANT 2g5
-
-# To revert to the standard BPI-R4 (2x SFP+) clear the setting:
-sudo fw_setenv BOARD_VARIANT
-```
-
-> [!IMPORTANT]
-> The change takes effect on the next reboot.  No re-flashing is required, but
-> you may want to do a factory reset to activate the changes in your system
-> `startup-config`: `sudo factory -y` from shell, or the CLI.
-
-`fw_setenv` writes to the `uboot.env` file on the aux partition.  U-Boot
-reads this at every boot (before loading the kernel) and selects the
-matching device tree:
-
-| `BOARD_VARIANT` | Device tree loaded                |
-|-----------------|-----------------------------------|
-| *(unset)*       | `mt7988a-bananapi-bpi-r4.dtb`     |
-| `2g5`           | `mt7988a-bananapi-bpi-r4-2g5.dtb` |
-
-## Additional Resources
-
-- [Infix Documentation][1]
-- [Official BPI-R4 Page][7]
-- [BPI-R4 Forum][8]
-- [Frank-W's site][9]
-- [Release Downloads][10]
-- [Bootloader Builds][11]
-
-## Building Custom Images
-
-```bash
-# Build bootloaders for SD and eMMC
-make x-bpi-r4-sd-boot
-make x-bpi-r4-emmc-boot
-
-# Build main system
-make aarch64
-
-# Create SD card image
-./utils/mkimage.sh -od bananapi-bpi-r4
-
-# Create eMMC image
-./utils/mkimage.sh -odt emmc bananapi-bpi-r4
-```
-
-[0]: https://www.kernelkit.org/posts/flashing-sdcard/
-[1]: https://www.kernelkit.org/infix/latest/
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r4-sdcard.img
-[3]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r4-emmc.img
-[4]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r4-emmc-boot-2026.01-latest.tar.gz
-[7]: https://docs.banana-pi.org/en/BPI-R4/BananaPi_BPI-R4
-[8]: https://forum.banana-pi.org/
-[9]: https://wiki.fw-web.de/doku.php?id=en:bpi-r4:start
-[10]: https://github.com/kernelkit/infix/releases/tag/latest
-[11]: https://github.com/kernelkit/infix/releases/tag/latest-boot
-[12]: https://github.com/frank-w/u-boot/releases
-[13]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2026-01-bpi-2026.01-2026-01-15_2013/bpi-r4_spim-nand_bl2.img
-[14]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2026-01-bpi-2026.01-2026-01-15_2013/bpi-r4_spim-nand_fip.bin

board/aarch64/bananapi-bpi-r4/bananapi-bpi-r4.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  d48246c717b505cc11df95171f2fd548b389e1a463f1af4c68d0b69fe0d1009b  LICENSE

board/aarch64/bananapi-bpi-r4/bananapi-bpi-r4.mk

@@ -1,49 +0,0 @@
-define BANANAPI_BPI_R4_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7988)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7988)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_LVTS_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_SOC_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7996E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XFI_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCS_STANDALONE,y)
-	$(call KCONFIG_SET_OPT,CONFIG_PCS_MTK_USXGMII,y)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MEDIATEK_2P5GE_PHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-LINUX_DTS_MT7988 = $(LINUX_DIR)/arch/arm64/boot/dts/mediatek
-
-define BANANAPI_BPI_R4_KERNEL_DTBS_INSTALL_TARGET
-	@$(call MESSAGE,"Installing kernel DTBs and DTBOs for BPI-R4")
-	$(foreach f, \
-		mt7988a-bananapi-bpi-r4.dtb \
-		mt7988a-bananapi-bpi-r4-2g5.dtb \
-		mt7988a-bananapi-bpi-r4-sd.dtbo \
-		mt7988a-bananapi-bpi-r4-emmc.dtbo, \
-		$(INSTALL) -D $(LINUX_DTS_MT7988)/$(f) \
-			$(TARGET_DIR)/boot/mediatek/$(f)$(sep))
-endef
-BANANAPI_BPI_R4_POST_INSTALL_TARGET_HOOKS += BANANAPI_BPI_R4_KERNEL_DTBS_INSTALL_TARGET
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/bananapi-bpi-r4/dts/Makefile

@@ -1,2 +0,0 @@
-dtb-y += infix/bananapi,bpi-r4.dtbo
-dtb-y += infix/bananapi,bpi-r4-2g5.dtbo

board/aarch64/bananapi-bpi-r4/dts/infix/bananapi,bpi-r4-2g5.dtso

@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/dts-v1/;
-/plugin/;
-
-/ {
-	compatible = "bananapi,bpi-r4-2g5";
-};
-
-/*
- * On the 2g5 variant, GMAC1 uses the internal 2.5G PHY (eth1 renamed to
- * "wan" by udev).  The switch's port0, which is labeled "wan" in the base
- * DTS, would cause a name collision when the switch driver registers it.
- * Rename it to "lan0" here so the kernel names it correctly from the start.
- */
-&gsw_port0 {
-	label = "lan0";
-};
-
-/*
- * The upstream mt7988a.dtsi sets compatible = "ethernet-phy-ieee802.3-c45"
- * on the internal 2.5G PHY node.  That gives genphy_c45 (built-in) OF-match
- * priority over the PHY-ID-based mtk-2p5ge driver, leaving the PHY powered
- * down and unclaimed.  Replace it with the standard ethernet-phy-idXXXX.XXXX
- * form so of_get_phy_id() registers the PHY as C22 with explicit ID 0x00339c11.
- * mtk-2p5ge then matches via PHY_ID_MATCH_VENDOR(0x00339c00) instead of
- * genphy_c45 winning via OF-match.
- * Note: /delete-property/ is not used because U-Boot fdt apply does not
- * implement property deletion in overlays.
- */
-&int_2p5g_phy {
-	compatible = "ethernet-phy-id0033.9c11";
-};

board/aarch64/bananapi-bpi-r4/dts/infix/bananapi,bpi-r4.dtso

@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/dts-v1/;
-/plugin/;
-
-/ {
-	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
-};
-
-/*
- * The upstream mt7988a-bananapi-bpi-r4.dtsi sets stdout-path = "serial0:..."
- * but the aliases node there only has ethernet entries.  Linux resolves
- * stdout-path by looking in /aliases, so we must add serial0 here.
- * Path references in overlay aliases cannot use &label, so use the full path.
- */
-&{/} {
-	aliases {
-		serial0 = "/soc/serial@11000000";
-	};
-
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb1>;
-			usb-port-names = "USB";
-		};
-	};
-};

board/aarch64/bananapi-bpi-r4/genimage.cfg.in

@@ -1,81 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r4-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-                gpt-no-backup = true
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-2g5-emmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtbo /boot/infix/bananapi,bpi-r4.dtbo /boot/infix/bananapi,bpi-r4-2g5.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-2g5-sdmmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-sd.dtbo /boot/infix/bananapi,bpi-r4.dtbo /boot/infix/bananapi,bpi-r4-2g5.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-emmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtbo /boot/infix/bananapi,bpi-r4.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-sdmmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-sd.dtbo /boot/infix/bananapi,bpi-r4.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/factory-config.cfg

@@ -1,404 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan0",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R4"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/udev/rules.d/60-mtk-2p5ge-phy.rules

@@ -1,5 +0,0 @@
-# The mtk-2p5ge PHY driver uses MDIO PHY ID matching, not OF compatible
-# matching.  udev auto-loading is based on MODALIAS, which for DT-described
-# devices is "of:N...C<compatible>" — a format that never matches the driver's
-# "mdio:..." module alias.  Match on OF_COMPATIBLE_0 explicitly instead.
-ACTION=="add", SUBSYSTEM=="mdio_bus", ENV{OF_COMPATIBLE_0}=="ethernet-phy-id0033.9c11", RUN+="/sbin/modprobe -b mtk-2p5ge"

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/udev/rules.d/90-bpi-r4-rename-ifaces.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="wan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth2", NAME="sfp1"

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4/etc/factory-config.cfg

@@ -1,396 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R4"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4/etc/udev/rules.d/90-bpi-r4-rename-ifaces.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp2"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth2", NAME="sfp1"

board/aarch64/bananapi-bpi-r4/uboot/emmc-extras.config

@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7988-emmc-env.dtsi"

board/aarch64/bananapi-bpi-r4/uboot/extras.config

@@ -1,40 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_OF_LIST="mt7988a-bananapi-bpi-r4 mt7988a-bananapi-bpi-r4-2g5"
-
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
-
-CONFIG_MTK_SPIM=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTK_SPIM=y
-CONFIG_MTK_SNOR=y
-
-CONFIG_BUTTON=y
-CONFIG_BUTTON_CMD=y
-CONFIG_BUTTON_GPIO=y
-
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DM=y

board/aarch64/bananapi-bpi-r4/uboot/mt7988-emmc-env.dtsi

@@ -1,7 +0,0 @@
-#include <mt7988-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7988a-bananapi-bpi-r4.dtb";
-      board   = "bananapi,bpi-r4-emmc";
-      ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; setenv board bananapi,bpi-r4-2g5-emmc; fi";
-};

board/aarch64/bananapi-bpi-r4/uboot/mt7988-env.dtsi

@@ -1,27 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       fdtoverlay_addr_r = "0x47f00000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-                       /*
-                        * Apply BOARD_VARIANT from aux uboot.env.
-                        * Infix writes BOARD_VARIANT=2g5 via fw_setenv on
-                        * BPI-R4-2g5 / BPI-R4P boards to select the correct
-                        * device tree.  Unset = standard R4 (2x SFP+).
-                        */
-                       ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; fi";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-               };
-       };
-};

board/aarch64/bananapi-bpi-r4/uboot/mt7988-sd-env.dtsi

@@ -1,7 +0,0 @@
-#include <mt7988-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7988a-bananapi-bpi-r4.dtb";
-      board   = "bananapi,bpi-r4-sdmmc";
-      ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; setenv board bananapi,bpi-r4-2g5-sdmmc; fi";
-};

board/aarch64/bananapi-bpi-r4/uboot/sd-extras.config

@@ -1,2 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7988-sd-env.dtsi"
-CONFIG_OF_LIST="mt7988a-bananapi-bpi-r4-sd"

board/aarch64/bananapi-bpi-r64/Config.in

@@ -1,7 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R64
-	bool "Banana Pi R64"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select SDCARD_AUX
-	help
-	  Build Banana PI R64 support

board/aarch64/bananapi-bpi-r64/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2026 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.