rauc: Enable streaming of upgrades

yangerd: containers: widen event debounce to avoid podman contention
yangerd: Fix containers
2026-07-23 01:23:00 +02:00 · 2026-06-27 08:41:22 +02:00 · 2026-06-27 08:41:22 +02:00 · 2026-06-27 08:41:22 +02:00 · 2026-06-27 08:41:22 +02:00 · 2026-06-27 08:41:22 +02:00
1275 changed files with 367153 additions and 1885 deletions
@@ -272,7 +272,7 @@ other contributions that are not aligned to this Code of Conduct."*
 [PEP-8]:    https://peps.python.org/pep-0008/
 [RDD]:      https://tom.preston-werner.com/2010/08/23/readme-driven-development
 [cbeams]:   https://cbea.ms/git-commit/#seven-rules
-[conduct]:    CODE-OF-CONDUCT.md
+[conduct]:    CODE_OF_CONDUCT.md
 [DCO]:        https://developercertificate.org/
 [closing]:    https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests
 [gpg-verify]: https://docs.github.com/en/authentication/managing-commit-signature-verification
@@ -0,0 +1,15 @@
+version: 2
+updates:
+  - package-ecosystem: gomod
+    directory: /src/webui
+    schedule:
+      interval: weekly
+    # goyang is pinned to our kernelkit fork via a replace directive and
+    # stepped by hand when we add patches; leave it for Dependabot to ignore.
+    ignore:
+      - dependency-name: github.com/openconfig/goyang
+
+  - package-ecosystem: gomod
+    directory: /src/netbrowse
+    schedule:
+      interval: weekly
@@ -10,7 +10,7 @@ jobs:
    name: Add issue to project Infix&co
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/add-to-project@v1.0.2
+      - uses: actions/add-to-project@v2
        with:
          project-url: https://github.com/orgs/kernelkit/projects/3
          github-token: ${{ secrets.ADD_TO_PROJECT }}
@@ -108,17 +108,11 @@ jobs:
    permissions:
      contents: write
    steps:
-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          pattern: "artifact-*"
          merge-multiple: true

-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
      - uses: ncipollo/release-action@v1
        with:
          allowUpdates: true
@@ -128,7 +122,7 @@ jobs:
          prerelease: true
          tag: "latest-boot"
          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
+          artifacts: "*.tar.gz"

      - name: Summary
        run: |
@@ -223,15 +223,6 @@ jobs:
            output/images/*-emmc.img*
          retention-days: 30

-      - name: Create checksums
-        run: |
-          cd output/images/
-          for file in *-sdcard.img *-emmc.img; do
-            if [ -f "$file" ]; then
-              sha256sum "$file" > "$file.sha256"
-            fi
-          done
-
      - name: Upload to release
        uses: ncipollo/release-action@v1
        with:
@@ -242,7 +233,7 @@ jobs:
          prerelease: true
          tag: "latest-boot"
          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "output/images/*-sdcard.img*,output/images/*-emmc.img*"
+          artifacts: "output/images/*-sdcard.img,output/images/*-emmc.img"

      - name: Generate summary
        run: |
@@ -45,6 +45,9 @@ jobs:
          target: ${{ matrix.target }}
          enabled: ${{ inputs.use_cache }}

+      # WebUI images bundle the mkdocs User's Guide via post-build.sh.
+      - uses: kernelkit/actions/setup-mkdocs@v1.2
+
      - name: Configure & Build
        env:
          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
@@ -124,6 +124,9 @@ jobs:
        with:
          target: ${{ env.TARGET }}

+      # WebUI images bundle the mkdocs User's Guide via post-build.sh.
+      - uses: kernelkit/actions/setup-mkdocs@v1.2
+
      - name: Configure ${{ env.TARGET }}
        run: |
          make ${{ env.TARGET }}_defconfig
@@ -103,7 +103,7 @@ jobs:

      - name: Create pull request
        if: steps.check.outputs.new_release == 'true'
-        uses: actions/github-script@v8
+        uses: actions/github-script@v9
        with:
          github-token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
          script: |
@@ -0,0 +1,68 @@
+name: Go Vulnerability Scan
+
+on:
+  push:
+    branches:
+      - main
+    paths:
+      - 'src/webui/**'
+      - 'src/netbrowse/**'
+      - '.github/workflows/govulncheck.yml'
+  pull_request:
+    paths:
+      - 'src/webui/**'
+      - 'src/netbrowse/**'
+      - '.github/workflows/govulncheck.yml'
+  schedule:
+    - cron: '5 0 * * 6'  # Saturday at 00:05 UTC, same as Coverity
+  workflow_dispatch:
+
+jobs:
+  govulncheck:
+    if: ${{ github.repository_owner == 'kernelkit' }}
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        module:
+          - src/webui
+          - src/netbrowse
+    steps:
+      - uses: actions/checkout@v6
+
+      - uses: actions/setup-go@v6
+        with:
+          go-version: stable
+
+      - name: Install govulncheck
+        run: go install golang.org/x/vuln/cmd/govulncheck@latest
+
+      - name: Scan ${{ matrix.module }}
+        working-directory: ${{ matrix.module }}
+        run: |
+          # Full report, for the run summary.  govulncheck exits non-zero
+          # whenever it finds anything, so don't let it fail the step here.
+          {
+            echo "## govulncheck: ${{ matrix.module }}"
+            echo '```'
+            govulncheck ./... || true
+            echo '```'
+          } | tee -a "$GITHUB_STEP_SUMMARY"
+
+          # Gate on vulnerabilities reachable from our code through a
+          # dependency.  govulncheck's call-graph analysis is transitive,
+          # so indirect use counts too (we call a dep that calls the bad
+          # symbol).  trace[0] is the vulnerable symbol; we key on the
+          # module it lives in.  A chain that bottoms out in stdlib is
+          # fixed by bumping the Buildroot host Go, not this module's
+          # go.mod, so it's reported above but doesn't fail the build.
+          # Keep the json scan and jq unguarded so a tool failure fails the
+          # gate closed; only grep's no-match exit (all-clear) is tolerated.
+          govulncheck -format json ./... > scan.json || true
+          called=$(jq -r 'select(.finding.trace[0].function != null) |
+                          .finding.trace[0].module' scan.json | sort -u)
+          vulns=$(printf '%s' "$called" | grep -vx stdlib || true)
+          if [ -n "$vulns" ]; then
+            echo "::error::Called vulnerabilities in dependencies: $(echo "$vulns" | paste -sd, -)"
+            exit 1
+          fi
@@ -1,88 +0,0 @@
-name: Manny the Manager
-
-on:
-  workflow_dispatch:
-    inputs:
-      checkout:
-        required: true
-        type: boolean
-      cleanup:
-        required: true
-        type: boolean
-      peek:
-        required: true
-        type: boolean
-
-jobs:
-  inventory:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Disk usage ...
-        run: |
-          cd
-          du -hs .[^.]*
-      - name: Disk inventory (1/2) ...
-        run: |
-          echo "df -h ========================================================================="
-          df -h
-          echo "mounts ========================================================================"
-          mount
-      - name: File inventory (1/2) ...
-        run: |
-          echo "Current directory: $(pwd)"
-          echo "Files in $HOME ================================================================"
-          ls $HOME
-          echo "Find $HOME ===================================================================="
-          find $HOME
-      - name: Container inventory ...
-        run: |
-          echo "Available container images: ==================================================="
-          docker images
-          echo "Available containers: ========================================================="
-          docker ps -a
-
-  checkout:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v6
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: x86_64
-          dl-prefix: dl-netconf
-      - name: Disk inventory (2/2) ...
-        run: |
-          echo "df -h ========================================================================="
-          df -h
-          echo "mounts ========================================================================"
-          mount
-      - name: File inventory (2/2) ...
-        run: |
-          echo "Current directory: $(pwd)"
-          echo "Files in $HOME ================================================================"
-          ls $HOME
-          echo "Find $HOME ===================================================================="
-          find $HOME
-
-  peeky:
-    if: ${{ inputs.peek }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Peek & Poke ...
-        run: |
-          whoami
-          ls -l /mnt/
-          cat /mnt/DATALOSS_WARNING_README.txt
-          sudo mkdir /mnt/x-aarch64
-          sudo chown $(id -un):$(id -gn) /mnt/x-aarch64
-          ls -l /mnt/
-
-  cleanup:
-    if: ${{ inputs.cleanup }}
-    needs: [inventory, peeky]
-    runs-on: ubuntu-latest
-    steps:
-      - name: Cleaning up cruft ...
-        run: |
-          docker image prune -af
-          docker volume prune -f
-          docker container prune -f
@@ -11,17 +11,11 @@ jobs:
    permissions:
      contents: write
    steps:
-      - uses: actions/download-artifact@v4
+      - uses: actions/download-artifact@v8
        with:
          pattern: "artifact-*"
          merge-multiple: true

-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
      - uses: ncipollo/release-action@v1
        with:
          allowUpdates: true
@@ -32,7 +26,7 @@ jobs:
          prerelease: true
          tag: "latest"
          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
+          artifacts: "*.tar.gz"

      - name: Summary
        run: |
@@ -78,22 +78,11 @@ jobs:
          echo "pre=${{ steps.rel.outputs.pre }}"
          echo "latest=${{ steps.rel.outputs.latest }}"

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          pattern: "artifact-*"
          merge-multiple: true

-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
      - name: Extract ChangeLog entry ...
        run: |
          cat doc/ChangeLog.md | ./utils/extract-changelog.sh > release.md
@@ -106,7 +95,7 @@ jobs:
          makeLatest: ${{ steps.rel.outputs.latest }}
          discussionCategory: ${{ steps.rel.outputs.cat }}
          bodyFile: release.md
-          artifacts: "*.tar.gz*,*.qcow2*"
+          artifacts: "*.tar.gz,*.qcow2"

      - name: Summary
        run: |
@@ -98,7 +98,7 @@ jobs:
        run: |
          make ${{ env.TARGET }}_defconfig

-      - uses: actions/download-artifact@v7
+      - uses: actions/download-artifact@v8
        with:
          pattern: "artifact-*"
          merge-multiple: true
@@ -143,3 +143,15 @@ jobs:
        with:
          name: test-report
          path: output/images/test-report.pdf
+
+      - name: Generate XPath Coverage Report for ${{ env.TARGET }}
+        if: always()
+        run: |
+          make test-dir="$(pwd)/$TEST_PATH" xpath-coverage-report
+
+      - name: Upload XPath Coverage Report as Artifact
+        if: always()
+        uses: actions/upload-artifact@v7
+        with:
+          name: xpath-coverage-report
+          path: output/images/xpath-coverage-report.pdf
@@ -22,22 +22,11 @@ jobs:
    permissions:
      contents: write
    steps:
-      - uses: actions/download-artifact@v6
+      - uses: actions/download-artifact@v8
        with:
          pattern: "artifact-*"
          merge-multiple: true

-      - name: Create checksums
-        run: |
-          for file in *.tar.gz; do
-            sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
      - uses: ncipollo/release-action@v1
        with:
          tag: latest
@@ -54,7 +43,7 @@ jobs:

            **Commit:** ${{ github.sha }}
            **Built:** ${{ github.run_id }}
-          artifacts: "*.tar.gz*,*.qcow2*"
+          artifacts: "*.tar.gz,*.qcow2"

      - name: Summary
        run: |
@@ -1,63 +1,21 @@
-[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
+[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Discord][discord-badge]][discord-url]

-<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=480 padding=10>
+<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=380 padding=10>

-Turn any ARM or x86 device into a powerful, manageable network appliance
-in minutes. From $35 Raspberry Pi boards to enterprise switches — deploy
-routers, IoT gateways, edge devices, or custom network solutions that
-just work.
+Infix turns an ARM or x86 device into a managed network appliance.  The
+same OS runs on a $35 Raspberry Pi and on enterprise switching hardware,
+so you can build a router, an IoT gateway, or an edge device on whatever
+you have on hand.

-## Our Values
+More in-depth material is available in our blog and User Guide:

-**🔒 Immutable**  
-Your system never breaks.  Read-only filesystem with atomic upgrades
-means no configuration drift, no corrupted updates, and instant rollback
-if something goes wrong.  Deploy once, trust forever.
+- <https://www.kernelkit.org/>
+- <https://www.kernelkit.org/infix/>

-**🤝 Friendly**  
-Actually easy to use. Auto-generated CLI from standard YANG models comes
-with built-in help for every command — just hit <kbd>?</kbd> or
-<kbd>TAB</kbd> for context-aware assistance.
+## See it in action

-Familiar NETCONF & RESTCONF APIs and [comprehensive documentation][4]
-mean you're never stuck.  Whether you're learning networking or managing
-enterprise infrastructure.
-
-**🛡️ Secure**  
-Built with security as a foundation, not an afterthought.  Minimal
-attack surface, separation between system and data, and container
-isolation.  Sleep better knowing your infrastructure is protected.
-
-## Why Choose Infix
-
-**Hardware Flexibility**: Start with a $35 Raspberry Pi, scale to
-enterprise switching hardware.  Same OS, same tools, same reliability.
-
-**Standards-Based**: Built around YANG models and IETF standards. Learn
-once, use everywhere - no vendor lock-in.
-
-**Container Ready**: Run your applications alongside networking
-functions.  GPIO access, dedicated Ethernet ports, custom protocols —
-your device, your rules.
-
-## Use Cases
-
-1. **Home Labs & Hobbyists**:  
-   Transform a Raspberry Pi into a full-featured router with WiFi  
-1. **IoT & Edge Computing**:  
-   Bridge devices to the cloud with reliable, updatable gateways  
-1. **Small Business Networks**:  
-   Enterprise-grade features without the complexity or cost  
-1. **Developers & Makers**:  
-   Test networking concepts, prototype IoT solutions, or build custom
-   appliances
-1. **Network Professionals**:  
-   Consistent tooling from development to production deployment.  
-   How about a digital twin using raw Qemu or [GNS3](https://gns3.com/infix)!
-
-## Quick Example
-
-Configure an interface in seconds - the CLI guides you with built-in help:
+The CLI is generated from the [YANG models][inside], so it guides you with
+built-in help.  Here's setting an IP address on an interface:

 <pre><code>admin@infix-12-34-56:/> <b>configure</b>
 admin@infix-12-34-56:/config/> <b>edit interface eth0</b>
@@ -94,38 +52,94 @@ eth0            ethernet   UP          52:54:00:12:34:56
 admin@infix-12-34-56:/> <b>copy running startup</b>
 </code></pre>

-Notice how <kbd>TAB</kbd> completion shows available options, `show`
-displays current config, and `diff` shows exactly what changed before
-you commit your changes with the `leave` command.
+<kbd>TAB</kbd> completes available options and <kbd>?</kbd> shows online help
+for each option and argument. `show` displays the current config, and `diff`
+shows exactly what changed before you commit it with `leave`.  See the [CLI
+documentation][3] for more.

-For more information, see [CLI documentation][3].
+## Web interface

-## Get Started
+If the CLI isn't your style, the same configuration is available through the
+web interface.  Log in from a browser, keep an eye on your device from the
+Status dashboard and use the Configure > Interface setup wizard to create more
+advanced setups, or just fold out an interface to add an IP address.

-Get [pre-built images][5] for your hardware.  Use the CLI, web
-interface, or standard NETCONF/RESTCONF tools, e.g., `curl`.  Add
-containers for any custom functionality you need.
+<p>
+  <a href="doc/img/webui-login.png"><img src="doc/img/webui-login.png" alt="Login" align="top" width=220></a>
+  <a href="doc/img/webui-dashboard.png"><img src="doc/img/webui-dashboard.png" alt="Dashboard" width=290></a>
+  <a href="doc/img/webui-wizard.png"><img src="doc/img/webui-wizard.png" alt="Setup wizard" width=260></a>
+</p>

-### Supported Platforms
+The web interface is built on the same concepts as the CLI, so operational
+status and state are kept separate from configuration and commands.

- **Raspberry Pi 2B/3B/4B/CM4** - Perfect for home labs, learning, and prototyping
- **Banana Pi-R3** - Your next home router and gateway
- **NanoPi R2S** - Compact dual-port router in a tiny package
- **x86_64** - Run in VMs or on mini PCs for development and testing
- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM64 platforms
- **Microchip SparX-5i** - Enterprise switching capabilities
- **Microchip SAMA7G54-EK** - ARM Cortex-A7
- **NXP i.MX8MP EVK** - Highly capable ARM64 SoC
- **StarFive VisionFive2** - RISC-V architecture support
+## Try it in 5 minutes

-*Why start with Raspberry Pi?* It's affordable, widely available, has
-built-in WiFi + Ethernet, and runs the exact same Infix OS you'd deploy
-in production. Perfect for learning, prototyping, or even small-scale
-deployments.
+You don't need hardware to get started:

+- **In a virtual lab** — run a full topology in [GNS3][gns3-post] and test
+  networks entirely in software.
+- **From source** — [build it and `make run`][build-post] to boot Infix in
+  QEMU, from `git clone` to pinging the internet.
+- **On real hardware** — grab a [pre-built image][5] for your board, or run
+  the `x86_64` image in any VM.
+
+Log in with `admin` / `admin` on the virtual and pre-built images.  On
+shipped products the factory-reset credentials are customizable — we
+typically provision a unique per-device password stored in EEPROM/VPD.
+
+## Supported hardware
+
+- **Raspberry Pi 2B/3B/4B/CM4** - a good starting point; built-in WiFi and Ethernet
+- **Banana Pi-R64/R3/R3 Mini/R4** - multi-port routers and gateways
+- **NanoPi R2S** - compact dual-port router
+- **x86_64** - VMs and mini PCs, for development or production
+- **Marvell CN9130 CRB, EspressoBIN** - ARM64 development boards
+- **Microchip SparX-5i** - enterprise switching
+- **Microchip SAMA7G54-EK** - ARM Cortex-A7 evaluation kit
+- **NXP i.MX8MP EVK** - ARM64 SoC evaluation kit
+- **StarFive VisionFive2** - RISC-V board
+
+*Why start with Raspberry Pi?* It's cheap, easy to get hold of, has
+built-in WiFi and Ethernet, and runs the same Infix you'd deploy in
+production — so what you learn on it carries straight over.
+
+> [!TIP]
 > 📖 **[Complete documentation][4]** • 💬 **[Join our Discord][discord-url]**

-## Technical Details
+## Why Infix
+
+**🔒 Immutable**  
+Read-only filesystem with atomic upgrades.  An update either applies
+cleanly or rolls back, so a failed upgrade or a power cut midway through
+won't leave you with a half-broken system.
+
+**🤝 Friendly**  
+The CLI is generated from the YANG models, so every command carries its
+own help — hit <kbd>?</kbd> or <kbd>TAB</kbd> to see what's available.
+The same models are reachable over NETCONF and RESTCONF, with
+[documentation][4] for when you get stuck.
+
+**🛡️ Secure**  
+A small attack surface, separation between system and data, and
+container isolation.  Since the system partition is read-only, a
+compromised service or container can't rewrite the OS underneath it.
+
+## Use cases
+
+1. **Home labs & hobbyists**:  
+   Turn a Raspberry Pi into a router with WiFi  
+1. **IoT & edge**:  
+   Build gateways you can update in the field  
+1. **Small business networks**:  
+   Routing, firewalling, and VLANs on affordable hardware  
+1. **Developers & makers**:  
+   Prototype networking ideas, or build a custom appliance with containers  
+1. **Network professionals**:  
+   The same tooling from lab to production — spin up a digital twin in raw
+   Qemu or [GNS3](https://gns3.com/infix)
+
+## Under the hood

 <a href="https://bitsign.se">
  <picture>
@@ -135,27 +149,29 @@ deployments.
  </picture>
 </a>

-Built on proven open-source foundations: [Linux][0], [Buildroot][1], and
-[sysrepo][2] — for reliability you can trust:
+Built on [Linux][0], [Buildroot][1], and [sysrepo][2]:

- **Immutable OS**: Read-only filesystem, atomic updates, instant rollback
- **YANG Configuration**: Industry-standard models with auto-generated tooling
- **Hardware Acceleration**: Linux switchdev support for wire-speed packet processing
- **Container Integration**: Docker support with flexible network and hardware access
- **Memory Efficient**: Runs comfortably on devices with as little as 256 MB RAM
- **Code Signing**: Releases are cryptographically signed for integrity verification
+- **Immutable OS**: read-only filesystem, atomic updates, rollback on failure
+- **YANG configuration**: standard models with an auto-generated CLI and APIs
+- **Hardware acceleration**: switchdev offload for wire-speed forwarding
+- **Container integration**: Docker, with access to host network and hardware
+- **Memory efficient**: runs on devices with as little as 256 MB RAM
+- **Code signing**: releases are cryptographically signed

-Perfect for everything from resource-constrained edge devices to
-high-throughput network appliances.
-
-With the entire system modeled in YANG, scalability is no longer an
-issue, be it in development, testing, or end users deploying and
-monitoring their devices.  All knobs and dials are accessible from the
-CLI (console/SSH), or remotely using the native NETCONF or RESTCONF
-APIs.
+Because the whole system is modeled in YANG, every setting is reachable
+the same way: from the CLI over console or SSH, or remotely over the
+native NETCONF and RESTCONF APIs.  The same models drive development,
+testing, and day-to-day monitoring.

 > Check the *[Latest Build][]* for bleeding-edge features.

+## Contributing
+
+Bug reports, ideas, and pull requests are welcome.  Start with
+[CONTRIBUTING][contributing] and the [code of conduct][coc].  Found a
+security issue?  Follow the [security policy][security].  Need a hand?
+See [support options][support] or [join us on Discord][discord-url].
+
 ---

 <div align="center">
@@ -171,6 +187,13 @@ APIs.
 [3]: https://www.kernelkit.org/infix/latest/cli/introduction/
 [4]: https://www.kernelkit.org/infix/
 [5]: https://github.com/kernelkit/infix/releases/latest
+[inside]:          https://www.kernelkit.org/posts/inside-infix/
+[gns3-post]:       https://www.kernelkit.org/posts/infix-in-gns3/
+[build-post]:      https://www.kernelkit.org/posts/building-infix-from-source/
+[contributing]:    .github/CONTRIBUTING.md
+[coc]:             .github/CODE_OF_CONDUCT.md
+[security]:        .github/SECURITY.md
+[support]:         .github/SUPPORT.md
 [Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest "Latest build"
 [License]:         https://en.wikipedia.org/wiki/GPL_license
 [License Badge]:   https://img.shields.io/badge/License-GPL%20v2-blue.svg
@@ -120,3 +120,29 @@ grep -qsE '^/bin/clish$$' "$TARGET_DIR/etc/shells" \
 if [ "$BR2_PACKAGE_HOST_PYTHON_YANGDOC" = "y" ]; then
   mkyangdoc "$BINARIES_DIR/yangdoc.html"
 fi
+
+# Bundle the mkdocs User's Guide into the rootfs, served by the WebUI's
+# nginx at /guide/.  Only when the WebUI is present (nothing serves it
+# otherwise, and it keeps minimal images small) and mkdocs is on the build
+# host.  Best-effort: a failed build warns but does not abort the image
+# build, and the WebUI hides its User Guide entry when the docs are absent.
+mkuserguide()
+{
+    local cfg dst
+    cfg="$(readlink -f "$common/../..")/mkdocs.yml"
+    dst="$TARGET_DIR/var/www/guide"
+
+    if ! command -v mkdocs >/dev/null 2>&1; then
+        ixmsg "mkdocs not found, skipping User's Guide bundling"
+        return
+    fi
+    ixmsg "Building User's Guide into $dst"
+    if ! mkdocs build -f "$cfg" -d "$dst" --clean --quiet; then
+        ixmsg "WARNING: mkdocs build failed, shipping without on-device User's Guide"
+        rm -rf "$dst"
+    fi
+}
+
+if [ "$BR2_PACKAGE_WEBUI" = "y" ]; then
+    mkuserguide
+fi
@@ -0,0 +1,5 @@
+RESTCONF_URL=https://127.0.0.1/restconf
+INSECURE_TLS=1
+# Spool firmware uploads (and any other temp files) to persistent storage
+# instead of the RAM-backed /tmp to enable push-upgrades on low-memory systems.
+TMPDIR=/var/tmp
@@ -1,3 +0,0 @@
-service <!> name:hostapd :%i \
-	[2345] hostapd -P/var/run/hostapd-%i.pid  /etc/hostapd-%i.conf \
-	-- Wi-Fi Access Point @%i
@@ -0,0 +1,3 @@
+service name:wpa_supplicant :%i \
+	[2345] wpa_supplicant -s -i %i -c /etc/wpa_supplicant-%i.conf -P/var/run/wpa_supplicant-%i.pid \
+	-- Wi-Fi Mesh @%i
@@ -0,0 +1 @@
+../restconf.app
@@ -0,0 +1,3 @@
+allow 127.0.0.1;
+allow ::1;
+deny all;
@@ -0,0 +1 @@
+restconf-access-local.conf
@@ -1,5 +1,6 @@
 # /telemetry/optics is for streaming (not used atm)
 location ~ ^/(restconf|yang|.well-known)/ {
+    include /etc/nginx/restconf-access.conf;
    grpc_pass grpc://[::1]:10080;
    grpc_set_header Host $host;
    grpc_set_header X-Real-IP $remote_addr;
@@ -0,0 +1,3 @@
+if [ -s /run/os-update ]; then
+    printf '\n\033[1;33m *** %s ***\033[0m\n\n' "$(cat /run/os-update)"
+fi
@@ -0,0 +1 @@
+f  /run/os-update  0666 admin admin
@@ -257,15 +257,15 @@ def parse_interface_info(ifname):
    for line in output.splitlines():
        stripped = line.strip()

-        # Interface type
+        # Interface type (can be multi-word, e.g. "mesh point")
        if stripped.startswith('type '):
-            result['iftype'] = stripped.split()[1]
+            result['iftype'] = ' '.join(stripped.split()[1:])

        # MAC address
        elif stripped.startswith('addr '):
            result['mac'] = stripped.split()[1]

-        # SSID
+        # SSID (AP mode) or mesh-id (mesh point mode) — kernel uses same attr
        elif stripped.startswith('ssid '):
            result['ssid'] = decode_iw_ssid(' '.join(stripped.split()[1:]))

@@ -538,6 +538,43 @@ def parse_link(ifname):
    return result


+def parse_phy_caps(phy_name):
+    """
+    Parse 'iw phy <name> info' for HT and VHT capability bitmasks.
+    Returns: {ht_cap: int, vht_cap: int}
+
+    iw phy info output format:
+        Capabilities: 0x1ef
+            ...
+        VHT Capabilities (0x339071b2):
+            ...
+    """
+    actual_phy = normalize_phy_name(phy_name)
+    output = run_iw('phy', actual_phy, 'info')
+    if not output:
+        output = run_iw(actual_phy, 'info')
+    if not output:
+        return {'ht_cap': 0, 'vht_cap': 0}
+
+    ht_cap = 0
+    vht_cap = 0
+
+    for line in output.splitlines():
+        stripped = line.strip()
+
+        # HT Capabilities: "Capabilities: 0x1ef"
+        ht_match = re.match(r'Capabilities:\s+(0x[0-9a-fA-F]+)', stripped)
+        if ht_match:
+            ht_cap = int(ht_match.group(1), 16)
+
+        # VHT Capabilities: "VHT Capabilities (0x339071b2):"
+        vht_match = re.match(r'VHT Capabilities\s+\((0x[0-9a-fA-F]+)\)', stripped)
+        if vht_match:
+            vht_cap = int(vht_match.group(1), 16)
+
+    return {'ht_cap': ht_cap, 'vht_cap': vht_cap}
+
+
 def main():
    if len(sys.argv) < 2:
        print(json.dumps({
@@ -548,7 +585,8 @@ def main():
                'info': 'Get PHY or interface information (requires device)',
                'survey': 'Get channel survey data (requires interface)',
                'station': 'Get connected stations in AP mode (requires interface)',
-                'link': 'Get link info in station mode (requires interface)'
+                'link': 'Get link info in station mode (requires interface)',
+                'caps': 'Get HT/VHT capability bitmasks (requires PHY/radio)'
            },
            'examples': [
                'iw.py list',
@@ -557,7 +595,8 @@ def main():
                'iw.py info wlan0',
                'iw.py station wifi0',
                'iw.py link wlan0',
-                'iw.py survey wlan0'
+                'iw.py survey wlan0',
+                'iw.py caps radio0'
            ]
        }, indent=2))
        sys.exit(1)
@@ -594,6 +633,11 @@ def main():
                data = {'error': 'survey command requires interface argument'}
            else:
                data = parse_survey(sys.argv[2])
+        elif command == 'caps':
+            if len(sys.argv) < 3:
+                data = {'error': 'caps command requires PHY/radio argument'}
+            else:
+                data = parse_phy_caps(sys.argv[2])
        else:
            data = {'error': f'Unknown command: {command}'}

@@ -0,0 +1,55 @@
+#!/bin/sh
+# Check for available software updates and notify on login if one exists.
+# Called by the scheduler.
+
+NOTIFY_FILE=/run/os-update
+TAG=os-update
+
+# Source os-release for VERSION and IMAGE_ID
+if [ ! -f /etc/os-release ]; then
+    logger -t "$TAG" "ERROR: /etc/os-release not found"
+    exit 1
+fi
+. /etc/os-release
+
+# Dev/dirty builds have no comparable semver — always show the latest release
+IS_RELEASE=true
+if ! echo "$VERSION" | grep -qE '^[0-9]+\.[0-9]+\.[0-9]+'; then
+    IS_RELEASE=false
+fi
+
+# Read configured update-url from running config, fall back to upstream
+UPDATE_URL=$(copy running-config \
+    -x '/ietf-system:system/infix-system:software/check-update/update-url' \
+    2>/dev/null \
+    | jq -r '.. | objects | ."update-url"? // empty')
+UPDATE_URL=${UPDATE_URL:-"https://github.com/kernelkit/infix"}
+
+# Derive API URL from the configured update URL.
+# Default (github.com): https://github.com/org/repo → https://api.github.com/repos/org/repo
+REPO=$(echo "$UPDATE_URL" | sed 's|https://github.com/||; s|/*$||')
+API_URL="https://api.github.com/repos/${REPO}/releases/latest"
+
+LATEST_TAG=$(curl -sSL --max-time 10 "$API_URL" 2>/dev/null \
+    | jq -r '.tag_name // empty')
+if [ -z "$LATEST_TAG" ]; then
+    logger -p daemon.info -t "$TAG" "Update check skipped: could not reach ${API_URL}"
+    exit 0
+fi
+LATEST=${LATEST_TAG#v}
+
+# Compare: is $1 strictly newer than $2?
+newer() {
+    [ "$1" = "$2" ] && return 1
+    [ "$(printf '%s\n%s' "$1" "$2" | sort -V | tail -1)" = "$1" ]
+}
+
+if [ "$IS_RELEASE" = false ] || newer "$LATEST" "$VERSION"; then
+    RELEASE_URL="${UPDATE_URL}/releases/${LATEST_TAG}"
+    MSG="Software update available: ${LATEST_TAG}, running ${VERSION} (see ${RELEASE_URL})"
+    logger -t "$TAG" "$MSG"
+    printf '%s\n' "$MSG" > "$NOTIFY_FILE"
+else
+    logger -p daemon.debug -t "$TAG" "No update available (current: $VERSION, latest: $LATEST)"
+    printf '' > "$NOTIFY_FILE"
+fi
@@ -244,6 +244,7 @@ CONFIG_FW_CFG_SYSFS_CMDLINE=y
 CONFIG_BLK_DEV_NULL_BLK=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_NBD=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
@@ -27,7 +27,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -162,6 +162,7 @@ BR2_PACKAGE_CURIOS_HTTPD=y
 BR2_PACKAGE_CURIOS_NFTABLES=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -175,7 +176,6 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
-BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -187,6 +187,8 @@ BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
 BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
+# BR2_PACKAGE_LANDING is not set
+BR2_PACKAGE_WEBUI=y
 BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
 BR2_PACKAGE_PCIUTILS=y
@@ -27,7 +27,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/aarch64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -131,6 +131,7 @@ BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -144,6 +145,7 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
+BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -28,7 +28,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/arm/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -149,6 +149,7 @@ BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -162,7 +163,6 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
-BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -170,6 +170,8 @@ BR2_PACKAGE_NETBROWSE=y
 BR2_PACKAGE_ONIEPROM=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
+# BR2_PACKAGE_LANDING is not set
+BR2_PACKAGE_WEBUI=y
 BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
 IMAGE_ITB_AUX=y
@@ -28,7 +28,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/arm/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -129,6 +129,7 @@ BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -142,6 +143,7 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
+BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -181,6 +181,7 @@ BR2_PACKAGE_CONFD=y
 BR2_PACKAGE_NETD=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -194,7 +195,6 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
-BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -206,6 +206,8 @@ BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
 BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
+# BR2_PACKAGE_LANDING is not set
+BR2_PACKAGE_WEBUI=y
 BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
 BR2_PACKAGE_PCIUTILS=y
@@ -26,7 +26,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -110,6 +110,7 @@ BR2_PACKAGE_RAUC=y
 BR2_PACKAGE_RAUC_DBUS=y
 BR2_PACKAGE_RAUC_GPT=y
 BR2_PACKAGE_RAUC_NETWORK=y
+BR2_PACKAGE_RAUC_STREAMING=y
 BR2_PACKAGE_RAUC_JSON=y
 BR2_PACKAGE_SYSKLOGD=y
 BR2_PACKAGE_SYSKLOGD_LOGGER=y
@@ -156,6 +157,7 @@ BR2_PACKAGE_CURIOS_HTTPD=y
 BR2_PACKAGE_CURIOS_NFTABLES=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -169,7 +171,6 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
-BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -181,6 +182,8 @@ BR2_PACKAGE_PODMAN_DRIVER_DEVICEMAPPER=y
 BR2_PACKAGE_PODMAN_DRIVER_VFS=y
 BR2_PACKAGE_TETRIS=y
 BR2_PACKAGE_ROUSETTE=y
+# BR2_PACKAGE_LANDING is not set
+BR2_PACKAGE_WEBUI=y
 BR2_PACKAGE_RAUC_INSTALLATION_STATUS=y
 BR2_PACKAGE_HOST_PYTHON_YANGDOC=y
 BR2_PACKAGE_PCIUTILS=y
@@ -26,7 +26,7 @@ BR2_ROOTFS_OVERLAY="${BR2_EXTERNAL_INFIX_PATH}/board/common/rootfs ${BR2_EXTERNA
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/qemu/x86_64/post-build.sh ${BR2_EXTERNAL_INFIX_PATH}/board/common/post-build.sh"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.33"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.18.36"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="${BR2_EXTERNAL_INFIX_PATH}/board/x86_64/linux_defconfig"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -128,6 +128,7 @@ BR2_PACKAGE_NETD=y
 BR2_PACKAGE_CONFD_TEST_MODE=y
 BR2_PACKAGE_GENCERT=y
 BR2_PACKAGE_STATD=y
+BR2_PACKAGE_YANGERD=y
 BR2_PACKAGE_FACTORY=y
 BR2_PACKAGE_FINIT_PLUGIN_HOTPLUG=y
 BR2_PACKAGE_FINIT_PLUGIN_HOOK_SCRIPTS=y
@@ -141,6 +142,7 @@ BR2_PACKAGE_FIREWALL=y
 BR2_PACKAGE_IITO=y
 BR2_PACKAGE_KEYACK=y
 BR2_PACKAGE_KLISH_PLUGIN_INFIX=y
+BR2_PACKAGE_LANDING=y
 BR2_PACKAGE_LOWDOWN=y
 BR2_PACKAGE_MCD=y
 BR2_PACKAGE_MDNS_ALIAS=y
@@ -3,6 +3,45 @@ Change Log

 All notable changes to the project are documented in this file.

+[v26.06.0][UNRELEASED]
+-------------------------
+
+### Changes
+
+- Upgrade Linux kernel to 6.18.36 (LTS)
+- Upgrade Buildroot to 2025.02.15 (LTS)
+- Add basic web interface: static status pages and a tree view of operational
+  status.  Curated configuration pages for some common tasks and a YANG tree
+  editor for the rest.  Also includes a maintenance section for firmware
+  upgrade, backup & restore, and more
+- Add Wi-Fi roaming for fast, seamless handoff between access points that
+  share an SSID: 802.11k, 802.11v and 802.11r (over-the-air FT).  See the
+  [Wi-Fi][wifi] guide for details
+- Add Wi-Fi 802.11s mesh support, letting access points form a wireless
+  backhaul between each other without cabling
+- Add band steering for dual-band access points, nudging dual-band
+  clients onto the faster 5/6 GHz band
+- Add `legacy-rates` option to re-enable 802.11b rates on 2.4 GHz for
+  old IoT devices (disabled by default)
+- Add system scheduling based on ietf-schedule (RFC 9922), using the
+  iCalendar recurrence grouping pruned to cron-expressible rules.  Schedules
+  are reusable time-specs; features (`scheduled-reboot`,
+  `software/check-update`) trigger off them via a schedule reference
+
+### Fixes
+
+- Fix #941: a VETH pair can now connect two containers directly, with both
+  ends assigned to containers.
+- Enabling IP masquerading in the firewall no longer enables IP forwarding on
+  all interfaces.  This has been an issue ever since the firewall support was
+  introduced in v25.10.0
+- Fix file permission regression in `/cfg/startup-config.cfg`, causing the
+  default `admin` user no permission to read or write the file from shell
+- Fix admin url shown for HTTP/HTTPS links in <https://network.local> browser,
+  used pre-conflict resolution hostname.local, instead of hostname-2.local
+
+[wifi]: https://www.kernelkit.org/infix/latest/wifi/
+
 [v26.05.0][] - 2026-05-29
 -------------------------

@@ -60,9 +99,9 @@ All notable changes to the project are documented in this file.
  show`, which were not expanded, so `show interface` and other operational
  reads failed.  Ranges are now expanded and listed correctly

-[ethernet]: ethernet.md#restricting-advertised-link-modes
+[ethernet]: https://www.kernelkit.org/infix/latest/ethernet/#restricting-advertised-link-modes
 [BPI-R3]:   https://docs.banana-pi.org/en/BPI-R3/BananaPi_BPI-R3
-[AcerConnectVero]: ../board/aarch64/acer-connect-vero-w6m/
+[AcerConnectVero]: https://github.com/kernelkit/infix/tree/main/board/aarch64/acer-connect-vero-w6m

 [v26.04.0][] - 2026-04-30
 -------------------------
@@ -2136,6 +2175,7 @@ Supported YANG models in addition to those used by sysrepo and netopeer:

 [buildroot]:  https://buildroot.org/
 [UNRELEASED]: https://github.com/kernelkit/infix/compare/v26.05.0...HEAD
+[v26.06.0]:   https://github.com/kernelkit/infix/compare/v26.05.0...v26.06.0
 [v26.05.0]:   https://github.com/kernelkit/infix/compare/v26.04.0...v26.05.0
 [v26.04.0]:   https://github.com/kernelkit/infix/compare/v26.03.0...v26.04.0
 [v26.03.0]:   https://github.com/kernelkit/infix/compare/v26.02.0...v26.03.0
@@ -21,6 +21,7 @@ regression test system solely relies on NETCONF and RESTCONF.
   - [Introduction](introduction.md)
   - [System Configuration](system.md)
   - [Network Configuration](networking.md)
+   - [Wi-Fi](wifi.md)
   - [DHCP Server](dhcp.md)
   - [Syslog Support](syslog.md)
 - **Infix In-Depth**
@@ -668,11 +668,9 @@ set:

 For an example of both, see the next section.

-> [!IMPORTANT]
-> **VETH Pair Limitation:** When using VETH pairs with containers, at least
-> one side of the pair must remain in the host namespace. It is currently
-> not possible to create VETH pairs where both ends are assigned to different
-> containers. One end must always be accessible from the host.
+> [!TIP]
+> Both ends of a VETH pair may be assigned to containers, connecting two
+> containers directly without involving the host namespace.

 [^3]: Something which the container bridge network type does behind the
    scenes with one end of an automatically created VETH pair.
@@ -122,13 +122,21 @@ recommend using `pipx` to install the necessary tooling:
 ```bash
 $ sudo apt install pipx
 $ pipx install mkdocs
-$ pipx inject mkdocs mkdocs-material pymdown-extensions mkdocs-callouts mike mkdocs-to-pdf
+$ pipx inject mkdocs mkdocs-material pymdown-extensions mkdocs-callouts mike mkdocs-to-pdf mkdocs-glightbox
 ```

-The last two packages, `mike` and `mkdocs-to-pdf`, are used for online
-versioning and PDF generation by GitHub Actions, but since they are in
-the `mkdocs.yml` file, everyone who wants to preview the documentation
-have to install all the tooling.
+The `mike` and `mkdocs-to-pdf` packages are used for online versioning
+and PDF generation by GitHub Actions, but since every plugin is listed
+in `mkdocs.yml`, anyone who wants to preview the documentation has to
+install all the tooling.
+
+> [!IMPORTANT]
+> MkDocs is also required to **build a WebUI image**.  The build bundles
+> the User's Guide into the image (served on-device at `/guide/`), so
+> `make` runs `mkdocs build` from `post-build.sh` when the `webui`
+> package is selected.  If MkDocs is missing the build still succeeds,
+> but the image ships without the on-device guide.  Minimal images and
+> any build without the `webui` package skip this step entirely.

 Preview with:

@@ -156,6 +156,11 @@ admin@example:/config/hardware/component/radio0/wifi-radio/> <b>leave</b>
 - `channel-width`: AP channel bandwidth.  Supported values are `auto`, `20MHz`,
  `40MHz`, `80MHz`, and `160MHz`.  Wider channels require matching hardware,
  regulatory approval, and are only available on 5GHz/6GHz where supported.
+- `legacy-rates`: Allow legacy 802.11b rates (1, 2, 5.5, 11 Mbps) on 2.4GHz
+  (default: disabled).  Slow 802.11b clients consume excessive airtime and
+  degrade throughput for all stations, so the rates are normally suppressed.
+  Enable only when old 2.4GHz-only IoT devices need them to associate.  No
+  effect on 5GHz/6GHz.
 - `probe-timeout`: Seconds to wait for PHY detection at boot (default: 0).  Set
  to a non-zero value (e.g., 30) for USB WiFi dongles that are slow to
  initialize due to firmware loading
@@ -165,6 +170,69 @@ admin@example:/config/hardware/component/radio0/wifi-radio/> <b>leave</b>
 > constraints and hardware capabilities.  Channel width can now be set
 > explicitly for AP mode, or left at `auto` to let the driver choose.

+### Bands and Channels
+
+Each band strikes a different balance between range and capacity.  The
+`country-code` decides which channels are legal in your location; the
+lists below are the common allocations, and your regulatory domain may
+allow fewer.
+
+**2.4 GHz**
+
+Channels 1-13 are available in most of the world, 1-11 in the US and
+Canada, and 14 in Japan (802.11b only).  At 20 MHz only three channels
+avoid overlap: 1, 6, and 11.  A 40 MHz channel takes up most of the
+band, so it is seldom worth using here.
+
+Drawbacks:
+
+- This is the most crowded band.  It is shared with Bluetooth, Zigbee,
+  cordless phones, microwave ovens, and most of the neighboring Wi-Fi.
+- Narrow channels and constant contention hold real throughput well
+  below 5 and 6 GHz.
+- The upside is range: 2.4 GHz reaches further and passes through walls
+  better, which keeps it useful for distant clients and 2.4 GHz-only
+  IoT devices.
+
+**5 GHz**
+
+UNII-1 (channels 36-48) and UNII-3 (149-165) need no radar checks.
+UNII-2 (channels 52-64 and 100-144) shares spectrum with radar and
+requires DFS.  ETSI regions such as the EU do not include UNII-3, so the
+only non-DFS 5 GHz channels there are 36-48.  This band supports 20, 40,
+80, and 160 MHz, so it is the one to use for wide, fast channels.
+
+Drawbacks:
+
+- Shorter range than 2.4 GHz, and a weaker signal through walls and
+  floors.
+- A DFS channel must be monitored for radar for 60 seconds (up to 10
+  minutes near some weather radars) before the AP may transmit, which
+  delays start-up.  If radar appears later, the AP has to leave the
+  channel within 10 seconds and avoid it for 30 minutes, dropping
+  clients during the move.
+- The widest 80 and 160 MHz channels almost always sit on DFS spectrum,
+  so the same radar rules apply to them.
+
+**6 GHz**
+
+The FCC regions open 59 channels (1, 5, 9 ... 233) across 5925-7125 MHz.
+ETSI regions, including the EU, currently open only the lower part,
+5945-6425 MHz (channels 1-93), for indoor use.  Clients find networks on
+the 15 Preferred Scanning Channels (5, 21, 37 ... 229) spaced every
+80 MHz, and `auto` selects channel 37.  There is no DFS in 6 GHz, so
+there is no radar start-up delay.
+
+Drawbacks:
+
+- The shortest range and the weakest wall penetration of the three
+  bands.
+- Only Wi-Fi 6E and newer clients can use it; older phones and IoT
+  devices cannot see the band at all.
+- AP operation requires WPA3-Personal (SAE) with management frame
+  protection, so WPA2-only and open networks are rejected.
+- Indoor power limits cap coverage further.
+
 ### WiFi 6 Support

 WiFi 6 (802.11ax) is always enabled in AP mode on all bands, providing improved
@@ -486,20 +554,253 @@ radio settings, and `show interface` to see all active AP interfaces.
 > AP and Station modes cannot be mixed on the same radio. All virtual interfaces
 > on a radio must be the same mode (all APs or all Stations).

-### AP as Bridge Port
+## Fast Roaming Between Access Points

-WiFi AP interfaces can be added to bridges to integrate wireless devices
-into your LAN:
+Fast roaming enables seamless client handoff between access points through
+802.11k/r/v standards. These features can be enabled individually based on
+your requirements.
+
+### 802.11r - Fast BSS Transition
+
+Enable 802.11r for fast handoff (<50ms) between APs with the same SSID:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r mobility-domain 4f57
+```
+
+**Requirements:**
+- All APs in roaming group must have **identical** SSID
+- All APs must have **identical** passphrase (same keystore secret)
+- All APs must use the **same mobility-domain** identifier
+
+**Mobility Domain Options:**
+- Explicit 4-character hex value (e.g., `4f57`) - default if not specified
+- `hash` - Automatically derive from SSID using MD5 (OpenWrt-compatible)
+
+Using `hash` allows multiple APs with the same SSID to automatically share
+the same mobility domain without manual configuration:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r mobility-domain hash
+```
+
+The NAS-Identifier (Network Access Server Identifier) is a string that
+uniquely identifies each AP within the 802.11r mobility domain.  APs
+exchange this identifier during fast BSS transition so they can look up
+the correct PMK-R1 key for the roaming client.  It must be unique per AP
+BSS and stable across reboots.
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r nas-identifier auto
+```
+
+`auto` derives the identifier as:
+
+`<interface-name>-<hostname>.<mobility-domain>`
+
+Or set an explicit string:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r nas-identifier ap01.wifi0.4f57
+```
+
+### 802.11k - Radio Resource Management
+
+Enable 802.11k for client neighbor discovery and better roaming decisions:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11k
+```
+
+Enables neighbor reports and beacon reports, allowing clients to discover
+nearby APs before roaming.
+
+### 802.11v - BSS Transition Management
+
+Enable 802.11v for network-assisted roaming:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11v
+```
+
+Allows APs to suggest better APs to clients, improving roaming decisions.
+
+#### Band Steering (MBO)
+
+Enabling `dot11v` also turns on MBO (Multi-Band Operation), advertised in
+beacons and association responses.  MBO lets a dual-band client see that
+the same SSID exists on another band and decide for itself when to move,
+while 802.11v BSS Transition Management lets the AP suggest a better
+target.
+
+On top of the client-cooperative hints, the AP applies active steering:
+on a 2.4 GHz access-point it suppresses probe responses to clients that
+were recently seen on the same SSID on the 5/6 GHz band, nudging
+dual-band clients onto the higher band.  MBO is **enabled by default**
+whenever `dot11v` is enabled:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11v
+```
+
+To turn it off while keeping BSS Transition Management:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11v band-steering false
+```
+
+> [!NOTE]
+> Band steering only matters when the same SSID is offered on two or more
+> bands (one access-point per radio).  On a single-band network there is
+> no other band to move to, so it has no effect.
+
+### Opportunistic Key Caching (OKC)
+
+OKC reduces re-authentication time for roaming clients that do not
+support 802.11r.  The AP caches the PMK from previous associations and
+shares it with other APs in the same mobility group.  It is **enabled by
+default** and only activates when both AP and client support it:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming okc false
+```
+
+### Recommended Configuration
+
+For optimal roaming experience, enable all three features:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11k
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11v
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r mobility-domain 4f57
+```
+
+Or use `hash` for automatic mobility domain derivation from SSID:
+
+```
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11k
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11v
+admin@example:/config/interface/wifi0/> set wifi access-point roaming dot11r mobility-domain hash
+```
+
+Repeat for all APs that should participate in the roaming group.
+
+> [!NOTE]
+> Not all client devices support all roaming features. Modern devices typically
+> support 802.11k/r/v, but older devices may only support basic roaming without
+> fast transition.
+
+## 802.11s Mesh Point Mode
+
+IEEE 802.11s is a wireless mesh networking standard operating at Layer 2.
+Mesh nodes form peer links directly with each other and route traffic
+using HWMP (Hybrid Wireless Mesh Protocol), which is built into the
+Linux mac80211 subsystem.  There is no central controller; nodes
+discover peers and find paths on their own.
+
+The standard defines two node roles:
+
+- **Mesh Point (MP)** - a basic mesh node that forwards traffic within
+  the mesh
+- **Mesh Portal (MPP)** - a mesh node that bridges traffic between the
+  mesh and an external network (e.g., a wired LAN)
+
+In practice, a node bridging the mesh interface to a LAN acts as a mesh
+portal.
+
+> [!NOTE]
+> Not all WiFi hardware supports 802.11s mesh.  The driver must implement
+> mesh point mode in mac80211.  Check your adapter's capabilities with
+> `iw phy <phy> info` and look for "mesh point" under "Supported interface
+> modes".
+
+### 802.11s vs EasyMesh
+
+|                             | **802.11s**              | **EasyMesh**                   |
+|-----------------------------|--------------------------|--------------------------------|
+| **Standard**                | IEEE (open, ratified)    | Wi-Fi Alliance (certification) |
+| **Topology**                | Peer-to-peer, any-to-any | Controller-based tree          |
+| **Single point of failure** | None                     | Controller                     |
+| **Multi-hop**               | True N-hop               | Limited (1-2 hops)             |
+| **Vendor lock-in**          | None                     | Common                         |
+| **Linux support**           | Kernel-native (mac80211) | Requires proprietary firmware  |
+
+Infix uses 802.11s because it runs entirely in the kernel with no
+proprietary components.
+
+### Mesh configuration
+
+A mesh point requires the radio to have `band`, `channel`, and a valid
+`country-code` configured. Mesh and AP modes cannot coexist on the same
+radio.
+
+**Step 1: Configure the radio**

 <pre class="cli"><code>admin@example:/> <b>configure</b>
-admin@example:/config/> <b>edit interface br0</b>
-admin@example:/config/interface/br0/> <b>set type bridge</b>
-
-admin@example:/config/> <b>edit interface wifi0</b>
-admin@example:/config/interface/wifi0/> <b>set bridge-port bridge br0</b>
-admin@example:/config/interface/wifi0/> <b>leave</b>
+admin@example:/config/> <b>edit hardware component radio1 wifi-radio</b>
+admin@example:/config/hardware/component/radio1/wifi-radio/> <b>set country-code DE</b>
+admin@example:/config/hardware/component/radio1/wifi-radio/> <b>set band 5GHz</b>
+admin@example:/config/hardware/component/radio1/wifi-radio/> <b>set channel 36</b>
+admin@example:/config/hardware/component/radio1/wifi-radio/> <b>leave</b>
 </code></pre>

+**Step 2: Create keystore entry for mesh security**
+
+All mesh links use WPA3-SAE encryption. All nodes in the same mesh
+network must share the same passphrase:
+
+<pre class="cli"><code>admin@example:/> <b>configure</b>
+admin@example:/config/> <b>edit keystore symmetric-key mesh-secret</b>
+admin@example:/config/keystore/…/mesh-secret/> <b>set key-format passphrase-key-format</b>
+admin@example:/config/keystore/…/mesh-secret/> <b>change cleartext-symmetric-key</b>
+Passphrase: ************
+Retype passphrase: ************
+admin@example:/config/keystore/…/mesh-secret/> <b>end</b>
+</code></pre>
+
+**Step 3: Configure the mesh interface**
+
+<pre class="cli"><code>admin@example:/config/> <b>edit interface wifi-mesh</b>
+admin@example:/config/interface/wifi-mesh/> <b>set type wifi</b>
+admin@example:/config/interface/wifi-mesh/> <b>set wifi radio radio1</b>
+admin@example:/config/interface/wifi-mesh/> <b>set wifi mesh-point mesh-id my-mesh</b>
+admin@example:/config/interface/wifi-mesh/> <b>set wifi mesh-point security secret mesh-secret</b>
+admin@example:/config/interface/wifi-mesh/> <b>leave</b>
+</code></pre>
+
+**Mesh parameters:**
+
+- `mesh-id`: Network identifier, 1-32 characters.  All nodes in the mesh
+  must use the same mesh ID
+- `forwarding`: L2 mesh forwarding (default: true).  When enabled, the
+  interface can be added to a bridge as a mesh portal
+- `security secret`: Keystore reference for the WPA3-SAE passphrase
+
+### Mesh portal (bridge integration)
+
+To connect the wireless mesh to a wired LAN, add the mesh interface to
+a bridge:
+
+<pre class="cli"><code>admin@example:/config/> <b>edit interface wifi-mesh</b>
+admin@example:/config/interface/wifi-mesh/> <b>set bridge-port bridge br0</b>
+admin@example:/config/interface/wifi-mesh/> <b>leave</b>
+</code></pre>
+
+### Mesh with roaming APs
+
+You can combine 802.11s mesh backhaul with roaming-enabled access
+points.  Each node has a mesh interface for backhaul on one radio and
+AP interfaces for clients on another:
+
+![802.11s mesh backhaul with roaming-enabled access points](img/wifi-mesh-roaming.svg)
+
+With 802.11r/k/v roaming enabled on the APs (same SSID, same
+passphrase, same mobility domain), clients hand off between nodes while
+the mesh carries backhaul traffic.
+
 ## Troubleshooting

 Use `show interface wifi0` to verify signal strength and connection status.
@@ -13,6 +13,7 @@ source "$BR2_EXTERNAL_INFIX_PATH/package/curios-httpd/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/curios-nftables/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/gencert/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/statd/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/yangerd/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/factory/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/faux/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/finit/Config.in"
@@ -42,6 +43,7 @@ source "$BR2_EXTERNAL_INFIX_PATH/package/tetris/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/libyang-cpp/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/sysrepo-cpp/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/rousette/Config.in"
+source "$BR2_EXTERNAL_INFIX_PATH/package/webui/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/nghttp2-asio/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/date-cpp/Config.in"
 source "$BR2_EXTERNAL_INFIX_PATH/package/rauc-installation-status/Config.in"
@@ -36,8 +36,10 @@ else
 CONFD_CONF_OPTS += --disable-gps
 endif
 define CONFD_INSTALL_EXTRA
-	for fn in confd.conf resolvconf.conf; do \
+	for fn in confd.conf crond.conf resolvconf.conf; do \
 		cp $(CONFD_PKGDIR)/$$fn  $(FINIT_D)/available/; \
+	done
+	for fn in confd.conf resolvconf.conf; do \
 		ln -sf ../available/$$fn $(FINIT_D)/enabled/$$fn; \
 	done
 	cp $(CONFD_PKGDIR)/tmpfiles.conf $(TARGET_DIR)/etc/tmpfiles.d/confd.conf
@@ -91,6 +93,12 @@ define CONFD_INSTALL_YANG_MODULES_GPS
 	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/gps.inc
 endef
 endif
+ifeq ($(BR2_PACKAGE_WEBUI),y)
+define CONFD_INSTALL_YANG_MODULES_WEBUI
+	$(COMMON_SYSREPO_ENV) \
+	$(BR2_EXTERNAL_INFIX_PATH)/utils/srload $(@D)/yang/web.inc
+endef
+endif

 # PER_PACKAGE_DIR
 # Since the last package in the dependency chain that runs sysrepoctl is confd, we need to
@@ -121,6 +129,7 @@ CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_CONTAINERS
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_WIFI
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_GPS
+CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_YANG_MODULES_WEBUI
 CONFD_POST_INSTALL_TARGET_HOOKS += CONFD_INSTALL_IN_ROMFS
 CONFD_TARGET_FINALIZE_HOOKS += CONFD_CLEANUP

@@ -0,0 +1,2 @@
+# Cron daemon for infix-schedule
+service [2345] crond -f -- Cron daemon
@@ -5,11 +5,15 @@ config BR2_PACKAGE_FEATURE_WIFI
 	select BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG
 	select BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN
 	select BR2_PACKAGE_WPA_SUPPLICANT_CLI
+	select BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
+	select BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING
 	select BR2_PACKAGE_WIRELESS_REGDB
        select BR2_PACKAGE_HOSTAPD
        select BR2_PACKAGE_HOSTAPD_DRIVER_NL80211
        select BR2_PACKAGE_HOSTAPD_WPA3
        select BR2_PACKAGE_HOSTAPD_WPS
+        select BR2_PACKAGE_HOSTAPD_WNM
+        select BR2_PACKAGE_HOSTAPD_MBO
 	select BR2_PACKAGE_IW
 	help
 	  Enables WiFi in Infix. Enables all requried applications.
@@ -69,7 +69,7 @@ define FEATURE_WIFI_LINUX_CONFIG_FIXUPS
 endef

 define FEATURE_WIFI_INSTALL_IN_ROMFS
-        mkdir -p $(TARGET_DIR)/etc/modprobe.d $(TARGET_DIR)/etc/udev/rules.d
+        mkdir -p $(TARGET_DIR)/etc/modprobe.d $(TARGET_DIR)/etc/udev/rules.d $(TARGET_DIR)/usr/libexec
        cp $(FEATURE_WIFI_PKGDIR)/mt7915e.conf $(TARGET_DIR)/etc/modprobe.d/mt7915e.conf
        cp $(FEATURE_WIFI_PKGDIR)/60-rename-wifi-phy.rules $(TARGET_DIR)/etc/udev/rules.d/60-rename-wifi-phy.rules
        cp $(FEATURE_WIFI_PKGDIR)/70-remove-virtual-wifi-interfaces.rules $(TARGET_DIR)/etc/udev/rules.d/70-remove-virtual-wifi-interfaces.rules
@@ -14,6 +14,8 @@ define LANDING_INSTALL_TARGET_CMDS
        mkdir -p $(TARGET_DIR)/usr/html/
 	cp $(@D)/*.html $(TARGET_DIR)/usr/html/
 	cp $(@D)/*.png  $(TARGET_DIR)/usr/html/
+	$(INSTALL) -D -m 0644 $(LANDING_PKGDIR)/default.conf \
+		$(TARGET_DIR)/etc/nginx/available/default.conf
 endef

 $(eval $(generic-package))
@@ -0,0 +1,30 @@
+<!DOCTYPE html>
+<html>
+<head>
+<title>Loading…</title>
+<meta charset="utf-8">
+<meta http-equiv="refresh" content="3">
+<style>
+  html { color-scheme: light dark; font-family: Tahoma, Verdana, Arial, sans-serif; }
+  body { max-width: 32em; margin: 4em auto; text-align: center; }
+  h1 { font-weight: 500; margin-bottom: 0.5em; }
+  p { color: #888; margin: 0.5em 0; }
+  .spinner {
+    display: inline-block;
+    width: 1.5em;
+    height: 1.5em;
+    margin-top: 1em;
+    border: 3px solid currentColor;
+    border-top-color: transparent;
+    border-radius: 50%;
+    animation: rot 1s linear infinite;
+  }
+  @keyframes rot { to { transform: rotate(360deg); } }
+</style>
+</head>
+<body>
+<h1>Loading…</h1>
+<p>The device is finishing its startup. This page refreshes automatically.</p>
+<p><span class="spinner" aria-hidden="true"></span></p>
+</body>
+</html>
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_WEBUI
+	bool "webui"
+	depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS
+	depends on BR2_PACKAGE_ROUSETTE
+	depends on !BR2_PACKAGE_LANDING
+	help
+	  Web management interface for Infix, a Go+HTMX application
+	  that provides browser-based configuration and monitoring
+	  via RESTCONF.
@@ -0,0 +1,44 @@
+# Throttle POST /login so a brute-force attempt can't pin the box on
+# the bcrypt-shaped credential check inside rousette/PAM. GET is left
+# unmetered: page loads after a 401-driven HX-Redirect shouldn't eat
+# into the budget.
+#
+# Zone is 32k (~500 IPs) — the minimum nginx accepts via shared-memory
+# allocation. With the cache full an attacker rotating source addresses
+# still tops out at ~2500 attempts/min total, all serialised through
+# bcrypt one at a time.
+#
+# 429 instead of the default 503 keeps the rate-limit response out of
+# the /50x.html error_page rewrite below (which auto-refreshes — would
+# loop a throttled client straight back to /login).
+map $request_method $webui_login_key {
+    POST    $binary_remote_addr;
+    default "";
+}
+limit_req_zone   $webui_login_key zone=webui_login:32k rate=5r/m;
+limit_req_status 429;
+
+server {
+    listen       80;
+    listen       [::]:80;
+    server_name  _;
+    return 301 https://$host$request_uri;
+}
+
+server {
+    listen       443 ssl;
+    listen       [::]:443 ssl;
+    server_name  _;
+    include      ssl.conf;
+
+    # 404 also points at /50x.html: the page is a "Loading…" screen
+    # with a meta-refresh, so the early-boot window where the Go
+    # backend isn't up yet (and any other transient 404 / 5xx) self-
+    # recovers as soon as upstream comes back.
+    error_page   404 500 502 503 504  /50x.html;
+    location = /50x.html {
+	root   html;
+    }
+
+    include /etc/nginx/app/*.conf;
+}
@@ -0,0 +1,11 @@
+# Shared proxy-pass shape for the webui upstream. Nested locations that
+# declare their own proxy_* directives don't inherit from the outer block,
+# so each location includes this file rather than relying on inheritance.
+
+proxy_pass         http://127.0.0.1:10000;
+proxy_http_version 1.1;
+proxy_set_header   Host $host;
+proxy_set_header   X-Real-IP $remote_addr;
+proxy_set_header   X-Forwarded-For $proxy_add_x_forwarded_for;
+proxy_set_header   X-Forwarded-Proto $scheme;
+proxy_redirect     off;
@@ -0,0 +1,72 @@
+# Must be at server scope, not on an inner location: client_max_body_size
+# does not inherit into a nested location that declares its own proxy_pass,
+# and the http-level 1m default would silently apply and reject bundle
+# uploads with 413.
+client_max_body_size 256m;
+
+location / {
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# burst=3 nodelay: three POSTs land back-to-back; the next needs a
+# fresh token (~12 s at 5r/m) or 429s.
+location = /login {
+    limit_req zone=webui_login burst=3 nodelay;
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# Keep proxy_request_buffering on (the default). Streaming the body races
+# the Go handler's response close, producing RST instead of FIN at
+# Content-Length and a client-visible 502. nginx spools the body to
+# /var/cache/nginx/client-body during the upload instead.
+location = /software/upload {
+    proxy_read_timeout 600s;
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# SSE progress stream: RAUC's Progress D-Bus property doesn't change while
+# it's writing a slot, so the upstream goes minutes without a frame. The
+# default 60 s proxy_read_timeout closes the stream and the browser sees
+# a transient error. Raise to cover a slow image write end-to-end.
+location = /software/progress {
+    proxy_read_timeout 1800s;
+    proxy_buffering off;
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# SSE live-tail stream for Maintenance > Logs.  Same buffering / timeout
+# concerns as the software progress stream: nginx must not buffer the
+# event frames, and the connection has to stay open through quiet logs.
+# The Go side sends a 15 s heartbeat, so 600 s of read timeout is plenty
+# of safety margin.
+location ~ ^/maintenance/logs/[^/]+/tail$ {
+    proxy_read_timeout 600s;
+    proxy_buffering off;
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# Support bundle collection runs `support collect`, which emits nothing
+# until it finishes (~50 s) and then sends the whole archive at once.
+# The upstream is silent for that window, so the default 60 s
+# proxy_read_timeout would 504 just as the bundle is ready.  Buffering
+# stays on — it's a plain file download, not a stream.
+location = /maintenance/support-bundle {
+    proxy_read_timeout 300s;
+    include /etc/nginx/webui-proxy.conf;
+}
+
+# On-device User's Guide: the mkdocs site bundled into the rootfs at
+# /var/www/guide by post-build.sh.  Served as static files (no upstream
+# call), public like the published guide.  Present only when the build
+# host had mkdocs; the WebUI hides its User Guide entry when it's absent.
+location /guide/ {
+    alias /var/www/guide/;
+    index index.html;
+}
+
+# Liveness probe — nginx-only, no upstream call. Used by the watchdog
+# div in base.html and the reboot-overlay poller.
+location = /device-status {
+    access_log off;
+    return 204;
+}
@@ -0,0 +1,29 @@
+################################################################################
+#
+# webui
+#
+################################################################################
+
+WEBUI_VERSION = 1.0
+WEBUI_SITE_METHOD = local
+WEBUI_SITE = $(BR2_EXTERNAL_INFIX_PATH)/src/webui
+WEBUI_GOMOD = infix/webui
+WEBUI_LICENSE = MIT
+WEBUI_LICENSE_FILES = LICENSE
+WEBUI_REDISTRIBUTE = NO
+
+define WEBUI_INSTALL_EXTRA
+	$(INSTALL) -D -m 0644 $(WEBUI_PKGDIR)/webui.svc \
+		$(FINIT_D)/available/webui.conf
+	$(INSTALL) -D -m 0644 $(WEBUI_PKGDIR)/webui.conf \
+		$(TARGET_DIR)/etc/nginx/app/webui.conf
+	$(INSTALL) -D -m 0644 $(WEBUI_PKGDIR)/webui-proxy.conf \
+		$(TARGET_DIR)/etc/nginx/webui-proxy.conf
+	$(INSTALL) -D -m 0644 $(WEBUI_PKGDIR)/default.conf \
+		$(TARGET_DIR)/etc/nginx/available/default.conf
+	$(INSTALL) -D -m 0644 $(WEBUI_PKGDIR)/50x.html \
+		$(TARGET_DIR)/usr/html/50x.html
+endef
+WEBUI_POST_INSTALL_TARGET_HOOKS += WEBUI_INSTALL_EXTRA
+
+$(eval $(golang-package))
@@ -0,0 +1,3 @@
+service <!> name:webui log:prio:daemon.info,tag:webui \
+	[2345] env:-/etc/default/webui webui -listen 127.0.0.1:10000 \
+	-- Web management interface
@@ -0,0 +1,7 @@
+config BR2_PACKAGE_YANGERD
+	bool "yangerd"
+	depends on BR2_PACKAGE_HOST_GO_TARGET_ARCH_SUPPORTS
+	help
+	  Operational data daemon for YANG/NETCONF/RESTCONF.
+	  Replaces Python yanger scripts with a persistent Go daemon
+	  serving operational data over a Unix socket IPC protocol.
@@ -0,0 +1,3 @@
+service <> name:yangerd log:prio:daemon.notice,tag:yangerd \
+	env:-/etc/default/yangerd \
+	[2345]  yangerd -- Operational data daemon
@@ -0,0 +1,35 @@
+################################################################################
+#
+# yangerd
+#
+################################################################################
+
+YANGERD_VERSION = 1.0.0
+YANGERD_SITE = $(BR2_EXTERNAL_INFIX_PATH)/src/yangerd
+YANGERD_SITE_METHOD = local
+YANGERD_GOMOD = github.com/kernelkit/infix/src/yangerd
+YANGERD_LICENSE = BSD-2-Clause
+YANGERD_LICENSE_FILES = LICENSE
+YANGERD_REDISTRIBUTE = NO
+
+YANGERD_BUILD_TARGETS = cmd/yangerd cmd/yangerctl
+YANGERD_INSTALL_BINS = yangerd yangerctl
+
+define YANGERD_INSTALL_EXTRA
+	$(INSTALL) -D -m 0644 $(YANGERD_PKGDIR)/yangerd.conf \
+		$(FINIT_D)/available/yangerd.conf
+	ln -sf ../available/yangerd.conf $(FINIT_D)/enabled/yangerd.conf
+	$(INSTALL) -d $(TARGET_DIR)/etc/default
+	echo '# yangerd build-time feature flags (generated by yangerd.mk)' \
+		> $(TARGET_DIR)/etc/default/yangerd
+	echo 'YANGERD_ENABLE_WIFI=$(if $(BR2_PACKAGE_IW),true,false)' \
+		>> $(TARGET_DIR)/etc/default/yangerd
+	echo 'YANGERD_ENABLE_CONTAINERS=$(if $(BR2_PACKAGE_PODMAN),true,false)' \
+		>> $(TARGET_DIR)/etc/default/yangerd
+	echo 'YANGERD_ENABLE_GPS=$(if $(BR2_PACKAGE_GPSD),true,false)' \
+		>> $(TARGET_DIR)/etc/default/yangerd
+	echo 'YANGERD_LOG_LEVEL=deug' >> $(TARGET_DIR)/etc/default/yangerd
+endef
+YANGERD_POST_INSTALL_TARGET_HOOKS += YANGERD_INSTALL_EXTRA
+
+$(eval $(golang-package))
@@ -0,0 +1,54 @@
+From 9899169d6dcb07aaecdde09c77ef59b56f66e3e5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Mattias=20Walstr=C3=B6m?= <lazzer@gmail.com>
+Date: Fri, 5 Jun 2026 09:10:15 +0200
+Subject: [PATCH 3/3] fix(functions): do not touch global ip_forward sysctl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Organization: Wires
+
+Infix manages IPv4/IPv6 forwarding per-interface via the sysctls
+net.ipv4.conf.<iface>.forwarding and net.ipv6.conf.<iface>.forwarding.
+firewalld's enable_ip_forwarding() instead writes the *global*
+net.ipv4.ip_forward and net.ipv6.conf.all.forwarding knobs.  The kernel
+propagates those global values to every interface, which clobbers the
+per-interface forwarding configuration Infix sets.
+
+Make enable_ip_forwarding() a no-op.  The backends still install the
+masquerade and forward-port nftables rules; the per-packet forwarding
+decision is governed by the inbound interface's forwarding flag, so
+routing keeps working on the interfaces where Infix enabled it while
+the global knob is left untouched.
+
+Signed-off-by: Mattias Walström <lazzer@gmail.com>
+---
+ src/firewall/functions.py | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+diff --git a/src/firewall/functions.py b/src/firewall/functions.py
+index 1b8a32c..cd87f5d 100644
+--- a/src/firewall/functions.py
+++ b/src/firewall/functions.py
+@@ -495,11 +495,14 @@ def writefile(filename, line):
+ 
+ 
+ def enable_ip_forwarding(ipv):
+-    if ipv == "ipv4":
+-        return writefile("/proc/sys/net/ipv4/ip_forward", "1\n")
+-    elif ipv == "ipv6":
+-        return writefile("/proc/sys/net/ipv6/conf/all/forwarding", "1\n")
+-    return False
+    # Infix manages IP forwarding per-interface via the sysctls
+    # net.ipv4.conf.<iface>.forwarding and net.ipv6.conf.<iface>.forwarding.
+    # Writing the global net.ipv4.ip_forward / net.ipv6.conf.all.forwarding
+    # knobs would clobber those per-interface settings, since the kernel
+    # propagates the global value to every interface.  Make this a no-op:
+    # firewalld still installs the masquerade and forward-port nft rules, and
+    # forwarding works on the interfaces where Infix has enabled it.
+    return True
+ 
+ 
+ def get_nf_conntrack_short_name(module):
+-- 
+2.43.0
+
@@ -0,0 +1,17 @@
+diff --git a/src/ap/hostapd.c b/src/ap/hostapd.c
+index 72a0bf503..9bdc2b41d 100644
+--- a/src/ap/hostapd.c
+++ b/src/ap/hostapd.c
+@@ -916,12 +916,6 @@ static int hostapd_validate_bssid_configuration(struct hostapd_iface *iface)
+ 	if (bits < j)
+ 		bits = j;
+ 
+-	if (bits > 40) {
+-		wpa_printf(MSG_ERROR, "Too many bits in the BSSID mask (%u)",
+-			   bits);
+-		return -1;
+-	}
+-
+ 	os_memset(mask, 0xff, ETH_ALEN);
+ 	j = bits / 8;
+ 	for (i = 5; i > 5 - j; i--)
@@ -1,4 +1,4 @@
-From 2fe4584b70875e1624053f90cecfff25d55925ea Mon Sep 17 00:00:00 2001
+From a3165eb664d65da173e91e8b159b8daf9a1285c7 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 19 Sep 2023 18:38:10 +0200
 Subject: [PATCH 01/50] net: phy: marvell10g: Support firmware loading on
@@ -1,4 +1,4 @@
-From 7a8bc364e2a1fe55aef7eb189405a799f69bc848 Mon Sep 17 00:00:00 2001
+From 0ee3021b04ec64d96b90d9246f37d3d7a1f8f187 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 21 Nov 2023 20:15:24 +0100
 Subject: [PATCH 02/50] net: phy: marvell10g: Fix power-up when strapped to
@@ -1,4 +1,4 @@
-From 6d4aa58ed9394b0b842e89fb4f7e080491e75bed Mon Sep 17 00:00:00 2001
+From 7e5a199bca36c5d8b1fd3875bbb8343c86db73ea Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 15 Nov 2023 20:58:42 +0100
 Subject: [PATCH 03/50] net: phy: marvell10g: Add LED support for 88X3310
@@ -1,4 +1,4 @@
-From deb7af02b1600f51052bca3d7f566019966062aa Mon Sep 17 00:00:00 2001
+From 62a1468f5c6fdaba5074fa7555e3b7888762e4e7 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 12 Dec 2023 09:51:05 +0100
 Subject: [PATCH 04/50] net: phy: marvell10g: Support LEDs tied to a single
@@ -1,4 +1,4 @@
-From 0777c7502a8c98c1f0987a58019ec43d230768eb Mon Sep 17 00:00:00 2001
+From 38519daa6941dc275e3efaaba699b6441f1c19e2 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 27 Mar 2024 10:10:19 +0100
 Subject: [PATCH 05/50] net: phy: Do not resume PHY when attaching
@@ -19,10 +19,10 @@ administratively down.
 1 file changed, 1 deletion(-)

 diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
-index dea8b94286d1..f8c376c26fac 100644
+index 26b08e3dbd1d..7597308534a0 100644
 --- a/drivers/net/phy/phy_device.c
 +++ b/drivers/net/phy/phy_device.c
-@@ -1750,7 +1750,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
+@@ -1753,7 +1753,6 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
 	if (err)
 		goto error;
 
@@ -1,4 +1,4 @@
-From 7e47e0fdb4b1d95f58e75d3ee1fd52d2d64866c9 Mon Sep 17 00:00:00 2001
+From e11c3a1cf1979f558a1a1c06ed68a99b89273aea Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Mon, 4 Mar 2024 16:47:28 +0100
 Subject: [PATCH 06/50] net: bridge: avoid classifying unknown multicast as
@@ -170,7 +170,7 @@ index 2cbae0f9ae1f..0c539bf4bebe 100644
 			br_multicast_flood(mdst, skb, brmctx, local_rcv, false);
 	}
 diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
-index 5855eb050208..06641afb99a8 100644
+index b77b3250afbd..f27cb9b54211 100644
 --- a/net/bridge/br_multicast.c
 +++ b/net/bridge/br_multicast.c
@@ -3836,6 +3836,11 @@ static void br_multicast_err_count(const struct net_bridge *br,
@@ -1,4 +1,4 @@
-From 099962fe582c35da76fee0b88ac0051050270e66 Mon Sep 17 00:00:00 2001
+From 9186aa368a4b580090d14ee1d9218ac33bc0aa5f Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Tue, 5 Mar 2024 06:44:41 +0100
 Subject: [PATCH 07/50] net: bridge: Ignore router ports when forwarding L2
@@ -1,4 +1,4 @@
-From 003a394f39682faabb14d968a32504306a5a97b5 Mon Sep 17 00:00:00 2001
+From 9641f50de1c780b0e45be9095ab28cbbc4c70011 Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Thu, 4 Apr 2024 16:36:30 +0200
 Subject: [PATCH 08/50] net: bridge: drop delay for applying strict multicast
@@ -24,7 +24,7 @@ Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
 2 files changed, 8 insertions(+), 38 deletions(-)

 diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
-index 06641afb99a8..bacff6c2e968 100644
+index f27cb9b54211..bfb38b18c1da 100644
 --- a/net/bridge/br_multicast.c
 +++ b/net/bridge/br_multicast.c
@@ -1760,10 +1760,6 @@ static void br_ip6_multicast_querier_expired(struct timer_list *t)
@@ -133,7 +133,7 @@ index 06641afb99a8..bacff6c2e968 100644
 	timer_delete_sync(&brmctx->ip6_own_query.timer);
 #endif
 }
-@@ -4726,8 +4710,6 @@ EXPORT_SYMBOL_GPL(br_multicast_router);
+@@ -4747,8 +4731,6 @@ EXPORT_SYMBOL_GPL(br_multicast_router);
 
 int br_multicast_set_querier(struct net_bridge_mcast *brmctx, unsigned long val)
 {
@@ -142,7 +142,7 @@ index 06641afb99a8..bacff6c2e968 100644
 	val = !!val;
 
 	spin_lock_bh(&brmctx->br->multicast_lock);
-@@ -4738,19 +4720,9 @@ int br_multicast_set_querier(struct net_bridge_mcast *brmctx, unsigned long val)
+@@ -4759,19 +4741,9 @@ int br_multicast_set_querier(struct net_bridge_mcast *brmctx, unsigned long val)
 	if (!val)
 		goto unlock;
 
@@ -1,4 +1,4 @@
-From 2d870ee42b147399d95dee79144195919dabb2fe Mon Sep 17 00:00:00 2001
+From d14c3ad03563ac803180c18e6917eb506bea7079 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Thu, 16 May 2024 14:51:54 +0200
 Subject: [PATCH 09/50] net: bridge: Differentiate MDB additions from
@@ -62,7 +62,7 @@ index 400eb872b403..cd7a2cd0911a 100644
 	if (br_multicast_should_handle_mode(brmctx, cfg->group.proto))
 		br_multicast_star_g_handle_mode(pg, cfg->filter_mode);
 diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
-index bacff6c2e968..a5f3e4935edc 100644
+index bfb38b18c1da..cc7ce7fc6580 100644
 --- a/net/bridge/br_multicast.c
 +++ b/net/bridge/br_multicast.c
@@ -616,7 +616,7 @@ static void br_multicast_fwd_src_handle(struct net_bridge_group_src *src)
@@ -1,4 +1,4 @@
-From 763289c999ed2b0a9ecdb417b32c9d5a2f6b104a Mon Sep 17 00:00:00 2001
+From 4d2335aac65d03c004d27cd27f077362588851e2 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Fri, 24 Nov 2023 23:29:55 +0100
 Subject: [PATCH 10/50] nvmem: layouts: onie-tlv: Let device probe even when
@@ -17,10 +17,10 @@ simply refrain from registering any cells in those cases.
 1 file changed, 3 insertions(+), 3 deletions(-)

 diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c
-index 0967a32319a2..48547d5bb502 100644
+index 8b0f3c1b8a0e..de85690aaa30 100644
 --- a/drivers/nvmem/layouts/onie-tlv.c
 +++ b/drivers/nvmem/layouts/onie-tlv.c
-@@ -197,7 +197,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
+@@ -198,7 +198,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
 
 	if (!onie_tlv_hdr_is_valid(dev, &hdr)) {
 		dev_err(dev, "Invalid ONIE TLV header\n");
@@ -29,7 +29,7 @@ index 0967a32319a2..48547d5bb502 100644
 	}
 
 	hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len);
-@@ -205,7 +205,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
+@@ -206,7 +206,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
 	table_len = hdr_len + data_len;
 	if (table_len > ONIE_TLV_MAX_LEN) {
 		dev_err(dev, "Invalid ONIE TLV data length\n");
@@ -38,7 +38,7 @@ index 0967a32319a2..48547d5bb502 100644
 	}
 
 	table = devm_kmalloc(dev, table_len, GFP_KERNEL);
-@@ -217,7 +217,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
+@@ -218,7 +218,7 @@ static int onie_tlv_parse_table(struct nvmem_layout *layout)
 		return ret;
 
 	if (!onie_tlv_crc_is_valid(dev, table_len, table))
@@ -1,4 +1,4 @@
-From 7e779610739e75b5d1e3b66bc8b0aa0c8ad68c9f Mon Sep 17 00:00:00 2001
+From 1f727779b31e9dec09b669d07655371c45fbc64b Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Sun, 11 Aug 2024 11:27:35 +0200
 Subject: [PATCH 11/50] net: usb: r8152: add r8153b support for link/activity
@@ -18,7 +18,7 @@ Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
 1 file changed, 8 insertions(+)

 diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
-index d61074178279..701cc975cf11 100644
+index 8cf4e81f8f88..1bb93efb96c6 100644
 --- a/drivers/net/usb/r8152.c
 +++ b/drivers/net/usb/r8152.c
@@ -41,6 +41,11 @@
@@ -1,4 +1,4 @@
-From fe101bb64d6f6c558c679630733d76bdf4ab3b5f Mon Sep 17 00:00:00 2001
+From 8053206624b54fb84715342e7b921e0939d594a7 Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Sun, 10 Aug 2025 18:52:54 +0200
 Subject: [PATCH 12/50] arm64: dts: mediatek: mt7986a: rename BPi R3 ports to
@@ -1,4 +1,4 @@
-From 672339f6b4a1b8849cf96fe9b6150bd6a49b15b4 Mon Sep 17 00:00:00 2001
+From 5b4047d082c93431f77819b894e29a13acebd787 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Wed, 20 Aug 2025 21:38:24 +0200
 Subject: [PATCH 13/50] drm/panel-simple: Add a timing for the Raspberry Pi 7"
@@ -1,4 +1,4 @@
-From 9ece9e9fc5269cfadeb53d6e8cafc124217f606f Mon Sep 17 00:00:00 2001
+From 3efdf41a3464704c4ffb99ea94266dc900f7b556 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Thu, 21 Aug 2025 11:20:23 +0200
 Subject: [PATCH 14/50] input:touchscreen:edt-ft5x06: Add polled mode
@@ -1,4 +1,4 @@
-From 3eecd843969fec2c1532c32b39f5e81bb51425b3 Mon Sep 17 00:00:00 2001
+From ce445d44a5e6ae84214986cbccef985a240e831d Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 12 Mar 2024 10:27:24 +0100
 Subject: [PATCH 15/50] [FIX] net: dsa: mv88e6xxx: Fix timeout on waiting for
@@ -1,4 +1,4 @@
-From 861654c5d7ce2180cc633517221eac516988c813 Mon Sep 17 00:00:00 2001
+From 57aa43c667a99e08c11a6141f80c068021585829 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 27 Mar 2024 15:52:43 +0100
 Subject: [PATCH 16/50] net: dsa: mv88e6xxx: Improve indirect register access
@@ -1,4 +1,4 @@
-From 6b84a1215d87bd03432ed6b79bd55e08d84e5125 Mon Sep 17 00:00:00 2001
+From 70c247b71e2f2ede0cae581b0558bd09cd85275e Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Mon, 22 Apr 2024 23:18:01 +0200
 Subject: [PATCH 17/50] net: dsa: mv88e6xxx: Honor ports being managed via
@@ -1,4 +1,4 @@
-From aaa6dce534b6c509f8e36055660bd670d2bc2758 Mon Sep 17 00:00:00 2001
+From b9b9cc025114c8bb8546012d575cbb9759ce6975 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 24 Apr 2024 22:41:04 +0200
 Subject: [PATCH 18/50] net: dsa: mv88e6xxx: Limit rsvd2cpu policy to user
@@ -1,4 +1,4 @@
-From f00c52f509a093dc503d14854cc8ae4ae2b5be11 Mon Sep 17 00:00:00 2001
+From 071b831a6ba7c5de2cc05738b595cea10e2eb068 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 28 May 2024 10:38:42 +0200
 Subject: [PATCH 19/50] net: dsa: tag_dsa: Use tag priority as initial
@@ -1,4 +1,4 @@
-From 64c5a7544da9777934ff971ec4b3c46e97e653ae Mon Sep 17 00:00:00 2001
+From 625493833fcdc4268a46ce4b2c59eefb1a0a0be0 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 16 Jan 2024 16:00:55 +0100
 Subject: [PATCH 20/50] net: dsa: Support MDB memberships whose L2 addresses
@@ -1,4 +1,4 @@
-From 6d9c872aafa7ec5a330778c82af2dde46e0959b1 Mon Sep 17 00:00:00 2001
+From c59543ced113c4a66ccf07cbfac5dc7dd6cb253e Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Thu, 21 Mar 2024 19:12:15 +0100
 Subject: [PATCH 21/50] net: dsa: Support EtherType based priority overrides
@@ -1,4 +1,4 @@
-From ff0b28ef9545851cf670d2786e71db7868fb310f Mon Sep 17 00:00:00 2001
+From fb04b75bc53f6b1b27f91f4ed21013b293e8577c Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Fri, 22 Mar 2024 16:15:43 +0100
 Subject: [PATCH 22/50] net: dsa: mv88e6xxx: Support EtherType based priority
@@ -1,4 +1,4 @@
-From d92fe419bd632fcd07254b95a11f5a2ada340555 Mon Sep 17 00:00:00 2001
+From 32e460b9fbc7b25817c05b9ec2c01f4827f7cca7 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 28 May 2024 11:04:22 +0200
 Subject: [PATCH 23/50] net: dsa: mv88e6xxx: Add mqprio qdisc support
@@ -1,4 +1,4 @@
-From 71ad38fb7f6bde1dedc16f1939ce2d224feb7e60 Mon Sep 17 00:00:00 2001
+From 30f92e6d97e8d6d8fe36e872e627b28fcf24fdac Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 29 May 2024 13:20:41 +0200
 Subject: [PATCH 24/50] net: dsa: mv88e6xxx: Use VLAN prio over IP when both
@@ -1,4 +1,4 @@
-From dd65f95bbbe1897452ddb520699a0c758f0a495c Mon Sep 17 00:00:00 2001
+From a9055d21d1237a5449d5f410d3a0c3d8953a1965 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Tue, 26 Nov 2024 19:45:59 +0100
 Subject: [PATCH 25/50] [FIX] net: dsa: mv88e6xxx: Trap locally terminated
@@ -1,4 +1,4 @@
-From 79f68061eb996858459b131ffed45e3abeaf37df Mon Sep 17 00:00:00 2001
+From 7fb7bc76b39078049d7965bef1bc976f9e1142c5 Mon Sep 17 00:00:00 2001
 From: Joachim Wiberg <troglobit@gmail.com>
 Date: Thu, 16 Jan 2025 12:35:12 +0100
 Subject: [PATCH 26/50] net: dsa: mv88e6xxx: collapse disabled state into
@@ -1,4 +1,4 @@
-From baeccc8d6402fca534a9706e1343e35bd04eb505 Mon Sep 17 00:00:00 2001
+From 2a8ff34ccf08f85f985ebea74b6eb47a64e2f247 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Wed, 12 Feb 2025 22:03:14 +0100
 Subject: [PATCH 27/50] net: dsa: mv88e6xxx: Only activate LAG offloading when
@@ -1,4 +1,4 @@
-From e1f1e6e36c398652f5bf121f4ae4c5b0c5af3e8a Mon Sep 17 00:00:00 2001
+From 348c281450bf30875877045d628f8a56ef7896a1 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Wed, 14 Jan 2026 18:22:41 +0100
 Subject: [PATCH 28/50] net: dsa: mv88e6xxx: Add LED support for 6393X
@@ -1,4 +1,4 @@
-From 787b93706592b82184bb5d2cf38ebd6ebc33068c Mon Sep 17 00:00:00 2001
+From 653db5307cd9d69d6b14e163f02226c83e26bd05 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Thu, 15 Jan 2026 22:47:37 +0100
 Subject: [PATCH 29/50] wifi: brcmfmac: support deletion and recreation of
@@ -1,4 +1,4 @@
-From 362d691d8554b1deb7973d622cb5e264422c71d0 Mon Sep 17 00:00:00 2001
+From 6445e629e19b9380dc96c9e5bfd15bbf706e1311 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Mon, 19 Jan 2026 13:06:53 +0100
 Subject: [PATCH 30/50] wifi: brcmfmac: check connection state before querying
@@ -1,4 +1,4 @@
-From 68421f2b9eb236a92faf983869513384c2f710d2 Mon Sep 17 00:00:00 2001
+From 2b970f903b571a3f3ca6e6043b2608c30825463f Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Tue, 20 Jan 2026 20:12:10 +0100
 Subject: [PATCH 31/50] wifi: brcmfmac: suppress log spam for
@@ -1,4 +1,4 @@
-From d56be4ebfa036e2947c83b72a409deaa6cc19cf6 Mon Sep 17 00:00:00 2001
+From eab236832c10d0a0c05fcab145abfe4267857957 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Tue, 20 Jan 2026 20:18:45 +0100
 Subject: [PATCH 32/50] wifi: brcmfmac: reduce log noise during AP to station
@@ -1,4 +1,4 @@
-From 7748aa9623b1118451faa821a7e10fedda62d1a0 Mon Sep 17 00:00:00 2001
+From 8bad16ffcea19fde114ac772399140ded40c6b91 Mon Sep 17 00:00:00 2001
 From: Mattias Walström <lazzer@gmail.com>
 Date: Tue, 17 Feb 2026 21:59:59 +0100
 Subject: [PATCH 33/50] net: phy: air_en8811h: add OF device table for
@@ -1,4 +1,4 @@
-From 90cf1591f68e8008679418a20605a784d90f1d8a Mon Sep 17 00:00:00 2001
+From 105d92fb189196e292f1ec60bc6f4abf883e1d3d Mon Sep 17 00:00:00 2001
 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
 Date: Fri, 20 Sep 2024 12:05:18 +0100
 Subject: [PATCH 34/50] drm: vc4: dsi: enable video and then retry failed
@@ -1,4 +1,4 @@
-From 2d326923d4009abd4966ca037f471b223ff7e415 Mon Sep 17 00:00:00 2001
+From 85515b63fa683de8025f439c0ba290b535cada59 Mon Sep 17 00:00:00 2001
 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
 Date: Wed, 8 Jun 2022 17:23:47 +0100
 Subject: [PATCH 35/50] drm: vc4: dsi: Clocks should be running before reset
--- a/Show More
+++ b/Show More