[DEBUG] Debug image settings

For testing purposes.

.github/CHECKLIST.md

@@ -1,41 +0,0 @@
-Checklists for Pull Requests and Releases
-=========================================
-
-Maintainer checklists for reviewing pull requests and doing releases.
-
-Pull Requests
--------------
-
-- If applicable, is there a readable ChangeLog entry?
-- If any LICENSE file has been updated, has the `.hash` file been updated?
-- If any change to a Finit `.svc` file, does any run/task linger?  
-  I.e., is there a runlevel and/or condition defined to prevent them
-  from running outside of their intended runlevel?
-- If any change to grub or qemu/qeneth setup, has it been tested in GNS3?
-  - If any change to u-boot/buildroot, has it been tested with `<booloader>_defconfig`
-- If any change to logging, have the resulting logs been audited?
-  - Check for duplicate entries, misspellings
-  - Check for sneaky severity changes, e.g., error vs note, error vs warning
-- If new subsystem, or major changes to a subsystem, have the docs been updated?
-- If change to mDNS, has it been tested with netbrowse?
-- If change to `_defconfig`, verify `local.mk` and sync with other archs
-  - Test manually as well, e.g., CLI changes do not have ha regression tests
-  - Build from distclean, or use artifacts built by build servers, for manual tests
-
-Releases
---------
-
-Recommended checkpoints, use at your own discretion:
-
-- Make at least one -betaN release to verify the GitHub workflow well in time release day
-  - Stuff happens, remember kernelkit/infix#735
-- Make at least one -rcN to flush out any issues in customer repos
-  - Easy to forget adaptations/hacks in customer repos -- may need Infix change/support
-- Verify release artifacts (checksums, completeness, no corrupted files)
-- Test on actual hardware for at least one architecture
-- Review ChangeLog for completeness
-- Check for release-blocking issues
-- Verify generated GNS3 appliance, no marketplace update on -rc builds
-- Ensure the markdown link for the release diff is updated
-- Ensure subrepos are tagged (can be automated, see kernelkit/infix#393)
-- Sync tags for all repo. sync activities

.github/CONTRIBUTING.md

@@ -1,279 +1,76 @@
-Contributing Guidelines
-=======================
+Contributing to Infix
+=====================
 
-Thank :heart: you for taking the time to read this!
+We welcome any and all help in the form of bug reports, fixes, patches
+to add new features -- *preferably as GitHub pull requests*.
 
-We welcome any help in the form of bug reports, fixes, or patches to add
-new features.  We *prefer* GitHub pull requests, but are open to other
-forms of collaboration as well.  [Let's talk!][support] :handshake:
+If you are unsure of what to do, or how to implement an idea or bug fix,
+open an issue with `"[RFC]: Unsure if this is a bug ... ?"`, or use the
+[GitHub discussions forum](https://github.com/orgs/kernelkit/discussions).
+Talking about code and problems first is often the best way to get started
+before submitting a pull request.
 
-If you are unsure how to start implementing an idea or fix:
-
-- :bug: open an issue, there are human friendly templates for _bugs_
-  and _feature requests_ at <https://github.com/kernelkit/infix/issues>
-- :speech_balloon: use the [Q&A Forum][discuss]
-- :technologist: The [Developer's Guide][devguide] is also a useful start
-
-> [!IMPORTANT]
-> Talking about code and problems first is often the best way to get
-> started before submitting a pull request.  We have found it always
-> saves time, yours and ours.
-
-:sparkles: General Guidelines
------------------------------
-
-When submitting bug reports or patches to bugs, please state which
-version the change is made against, what it does, and, more importantly
-*why* -- from your perspective, why is it a bug, why does the code need
-changing in this way.  Start with why.
-
-- :bug: Bug reports need metadata like Infix version or commit hash
-- :adhesive_bandage: Bug fixes also need version, and (preferably) a
-  corresponding issue number for the ChangeLog
-- :new: New features, you need to get approval of the YANG model first!  
-  :speech_balloon: Please use the [Forum][discuss], e.g., category:
-  *Ideas*, or open a :pray: feature request issue
-- :white_check_mark: New features also need new regression tests, this
-  can be basic tests or more complex use-case tests comprising multiple
-  subsystems, see [Testing Changes](#test_tube-testing-changes), below
+When submitting a bug report, patch, or pull request, please start by
+stating the version the change is made against, what it does, and why.
 
 Please take care to ensure you follow the project coding style and the
 commit message format.  If you follow these recommendations you help
-the maintainers and make it easier for them to include your code.
+the maintainer(s) and make it easier for them to include your code.
 
-:woman_technologist: Coding Style
----------------------------------
 
-Before jumping into code, remember to **document new features** and bug
-fixes.  Both the manual and ChangeLog are in the `doc/` sub-directory
-and it is expected that you provide a human-readable summary for the
-release notes (ChangeLog) and at least a configuration example in the
-manual for new features.
+Coding Style
+------------
 
-> [!TIP]
-> Consider ["Readme driven development"][RDD] for new features.  It is
-> amazing how many flaws in your own bright ideas come to bare when you
-> suddenly have to explain them to someone else!
+> **Tip:** Always submit code that follows the style of surrounding code!
 
-We expect code contributions for:
+First of all, lines are allowed to be longer than 72 characters these
+days.  In fact, there exist no enforced maximum, but keeping it around
+100 chars is OK.
 
-- C code in [Linux Coding Style][Linux]
-- Python code should follow [PEP-8][]
+The coding style itself is otherwise strictly Linux [KNF][].
 
-> [!IMPORTANT]
-> **However,** always submit code that follows the style of surrounding
-> code!  Legacy takes precedence, and remember, we read code a lot more
-> than write it, so legibility is important.
 
-The ChangeLog deserves a separate mention:
-
-- Releases are listed in reverse chronological order order, so the
-  latest/next release is at the beginning of the file
-- Only *user-facing bugs and features* are detailed, so code refactor,
-  new tests, etc. are not listed.
-- Add your changes/features to the Changes section
-- Add your Fix line in the Fixes section, in numeric order
-- Changes and fixes without an issue number are listed after all
-  numbered ones
-- YANG model changes are documented in their respective model, for
-  standard models, e.g., for `ietf-interfaces.yang`, the corresponding
-  `infix-interfaces.yang` detail augments/deviations as revisions.
-
-A final note, lines of code are allowed to be longer than 72 characters
-these days, unless you live by PEP-8 (see above).  There is no enforced
-maximum, but the team usually keep it around 100 characters for both C
-and Python.
-
-:test_tube: Testing Changes
----------------------------
-
-Please test your changes, no matter how trivial or obviously correct
-they may seem.  Nobody is infallible, making mistakes is only human.
-It is also the best insurance policy for your feature, it ensures your
-use-case will remain functional as the source base evolves.
-
-For new functionality we expect new regression tests to be added in
-the same pull request.
-
-For help getting started with testing, see the following resources:
-
-- [Developer's Guide][devguide]
-- [Regression Testing][testing]
-
-:memo: Commit Messages
-----------------------
+Commit Messages
+---------------
 
 Commit messages exist to track *why* a change was made.  Try to be as
 clear and concise as possible in your commit messages, and always, be
 proud of your work and set up a proper GIT identity for your commits:
 
-<img src="../doc/jack.png" width=70 align="right">
+    git config --global user.name "Jane Doe"
+    git config --global user.email jane.doe@example.com
 
-```bash
-$ git config --global user.name "Jacky Linker"
-$ git config --global user.email jacky.linker@example.com
-```
+Example commit message from the [Pro Git][gitbook] online book, notice
+how `git commit -s` is used to automatically add a `Signed-off-by`:
 
-Example commit message from one of many [online guides][cbeams].  Use
-`git commit -s` to automatically add a `Signed-off-by` for proof of
-origin, see [DCO][] for more info.
+    Brief, but clear and concise summary of changes
+    
+    More detailed explanatory text, if necessary.  Wrap it to about 72
+    characters or so.  In some contexts, the first line is treated as
+    the subject of an email and the rest of the text as the body.  The
+    blank line separating the ummary from the body is critical (unless
+    you omit the body entirely); tools like rebase can get confused if
+    you run the two together.
+    
+    Further paragraphs come after blank lines.
+    
+     - Bullet points are okay, too
+    
+     - Typically a hyphen or asterisk is used for the bullet, preceded
+       by a single space, with blank lines in between, but conventions
+       vary here
+    
+    Signed-off-by: Jane Doe <jane.doe@example.com>
 
-```text
-subsystem: brief, but clear and concise summary of changes
 
-More detailed explanatory text, if necessary.  Wrap it to about 72
-characters or so.  In some contexts, the first line is treated as
-the subject of an email and the rest of the text as the body.  The
-empty line separating summary from body is critical.  Tools like
-rebase can get confused if the empty line is missing.
-
-Further paragraphs should be separated with empty lines.
-
- - Bullet points are okay, too
-
- - Typically a hyphen or asterisk is used for the bullet, preceded
-   by a single space, with blank lines in between, but conventions
-   vary here
-
-If you use an issue tracker, put references to them at the bottom,
-like this:
-
-Resolves: #123
-See also: #456, #789
-
-Signed-off-by: Jacky Linker <jacky.linker@example.com>
-```
-
-This is an example of how to [automatically close][closing] an issue
-when the commit is merged to mainline.  Several keywords are available.
-
-:lock_with_ink_pen: Signing Commits with GPG
----------------------------------------------
-
-To ensure the authenticity and integrity of your contributions, we
-**require** all commits to be signed with GPG.  This cryptographically
-verifies that commits come from a trusted source.
-
-### Generating a GPG Key
-
-If you don't already have a GPG key, generate one:
-
-```bash
-$ gpg --full-generate-key
-```
-
-When prompted, choose:
-- Key type: `RSA and RSA` (default)
-- Key size: `4096` bits (recommended for security)
-- Expiration: `0` (key does not expire)
-- Real name and email: Use the same email as your Git configuration
-
-> [!NOTE]
-> We recommend keys that do not expire for signing commits.  Expiration
-> creates a "usability time bomb" without providing meaningful security
-> benefits for code signing.  See [this article][pgpfan] for details.
-
-### Configuring Git to Sign Commits
-
-First, find your GPG key ID:
-
-```bash
-$ gpg --list-secret-keys --keyid-format=long
-```
-
-Look for the line starting with `sec`, the key ID is the part after the `/`.
-For example, in `sec   rsa4096/ABCD1234EFGH5678`, the key ID is `ABCD1234EFGH5678`.
-
-Configure Git to use your GPG key:
-
-```bash
-$ git config --global user.signingkey ABCD1234EFGH5678
-$ git config --global commit.gpgsign true
-```
-
-The second command enables automatic signing for all commits.  Alternatively,
-you can sign individual commits with `git commit -S`.
-
-### Publishing Your Public Key
-
-To allow others to verify your signatures, publish your public key to a
-keyserver:
-
-```bash
-$ gpg --keyserver hkps://keys.openpgp.org --send-keys ABCD1234EFGH5678
-```
-
-> [!IMPORTANT]
-> The keyserver will send a verification email to the address associated
-> with your key.  You **must** click the link in that email to confirm
-> ownership before your key becomes searchable by email address.
-
-Alternative keyservers you can use:
-- `hkps://keyserver.ubuntu.com`
-- `hkps://pgp.mit.edu`
-
-### Adding Your GPG Key to GitHub
-
-For GitHub to show your commits as "Verified", you need to add your public
-key to your account:
-
-1. Export your public key:
-   ```bash
-   $ gpg --armor --export ABCD1234EFGH5678
-   ```
-
-2. Copy the entire output, including the `-----BEGIN PGP PUBLIC KEY BLOCK-----`
-   and `-----END PGP PUBLIC KEY BLOCK-----` lines.
-
-3. Go to [GitHub Settings → SSH and GPG keys](https://github.com/settings/keys)
-
-4. Click **New GPG key** and paste your public key.
-
-Now your signed commits will display a "Verified" badge on GitHub! :white_check_mark:
-
-For more details, see GitHub's [official documentation on commit signature verification][gpg-verify].
-
-:twisted_rightwards_arrows: Pull Requests
------------------------------------------
-
-> [!NOTE]
-> _The git repository is the canonical location for all information._
-
-A pull request should preferably address a single issue or change.  This
-may of course include multiple related changes, but what is important to
-remember is the bandwidth of the maintainers.  A smaller well documented
-PR is more likely to get attention quicker in some reviewer's busy day.
-
-Well documented here means that each commit message stands on its own,
-telling the complete story of the change.  In fact each commit should,
-as much as possible, be independent of other changes.  This is very
-important, not only when digging though logs to understand why a piece
-of code exists, but also when bisecting a problem -- each single commit
-should also compile and be possible to run.
-
-If you've worked on projects that send patches, like the Linux kernel or
-Buildroot, consider the pull request message body similar to the cover
-letter for a series of patches -- it's a summary of changes, and it is
-lost when the changes are merged to the mainline branch.
-
-:balance_scale: Code of Conduct
--------------------------------
+Code of Conduct
+---------------
 
 It is expected of everyone to respect the [Code of Conduct][conduct].
-The *"maintainers have the right and responsibility to remove, edit, or
-reject comments, commits, code, discussion forum threads, issues, and
-other contributions that are not aligned to this Code of Conduct."*
+The *"maintainers have the right and responsibility to remove, edit,
+or reject comments, commits, code, wiki edits, issues, and other
+contributions that are not aligned to this Code of Conduct."*
 
-[support]:  https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md
-[discuss]:  https://github.com/orgs/kernelkit/discussions
-[testing]:  https://github.com/kernelkit/infix/blob/main/doc/testing.md
-[devguide]: https://github.com/kernelkit/infix/blob/main/doc/developers-guide.md
-[Linux]:    https://www.kernel.org/doc/html/v6.9/process/coding-style.html
-[PEP-8]:    https://peps.python.org/pep-0008/
-[RDD]:      https://tom.preston-werner.com/2010/08/23/readme-driven-development
-[cbeams]:   https://cbea.ms/git-commit/#seven-rules
-[conduct]:    CODE-OF-CONDUCT.md
-[DCO]:        https://developercertificate.org/
-[closing]:    https://docs.github.com/en/get-started/writing-on-github/working-with-advanced-formatting/using-keywords-in-issues-and-pull-requests
-[gpg-verify]: https://docs.github.com/en/authentication/managing-commit-signature-verification
-[pgpfan]:     https://articles.59.ca/doku.php?id=pgpfan:expire
+[KNF]:      https://en.wikipedia.org/wiki/Kernel_Normal_Form
+[gitbook]:  https://git-scm.com/book/ch5-2.html
+[conduct]:  CODE-OF-CONDUCT.md

.github/ISSUE_TEMPLATE/bug-report.yml

@@ -1,69 +0,0 @@
-# https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
-name: "\U0001F41E Bug report"
-description: Create a bug report
-labels:
-  - "bug"
-  - "triage"
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank :heart: you for taking the time to fill out this bug report!**
-
-        We kindly ask that you search to see if an issue [already exists](https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+) for the bug you encountered.
-
-  - type: textarea
-    attributes:
-      label: Current Behavior
-      description: |
-        A clear and concise description of the issue you're experiencing.
-      value: |
-        For code snippets, logs, commands, etc., please use triple backticks:
-        ```
-        admin@infix-c0-ff-ee:/> show log
-        May 15 07:21:02 infix-00-00-00 container[3192]: Failed creating container test from curios-httpd-v24.03.0
-        - (press h for help or q to quit)
-        ```
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Expected Behavior
-      description: |
-        A clear and concise description of what you expected to happen.
-      value: |
-        ```
-        admin@infix-c0-ff-ee:/> show log
-        May 15 07:21:02 infix-c0-ff-ee container[3192]: Successfully created container test from curios-httpd-v24.03.0
-        - (press h for help or q to quit)
-        ```
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Steps To Reproduce
-      description: |
-        Steps to reproduce the issue.  For example:
-
-        1. Built from source
-        2. Upgrade to latest release, vYY.MM.P
-        3. Factory reset
-        4. Enable feature
-        5. Check the logs/show command/operational status
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Additional information
-      description: |
-        - Relevant parts of `startup-config`
-        - Output from `show interfaces`, if applicable
-        - Other observations, screenshots, log files ...
-
-        **Tip:** You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,7 +0,0 @@
-contact_links:
-  - name: "🔍 Look for my Issue"
-    url: https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+
-    about: Thank ❤️ you for your time! We kindly ask that you first check if an issue already exists.
-  - name: "💬 Discussions and Q&A"
-    url: https://github.com/kernelkit/infix/discussions
-    about: Discussions are perfect for quick questions, bouncing ideas, and things that may be a bug.

.github/ISSUE_TEMPLATE/feature-request.yml

@@ -1,45 +0,0 @@
-# https://docs.github.com/en/communities/using-templates-to-encourage-useful-issues-and-pull-requests/syntax-for-githubs-form-schema
-name: "\U0001F6E0️ Feature request"
-description: Suggest a new feature, idea or improvement of the OS
-labels:
-  - "feature"
-  - "triage"
-
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank :heart: you for taking the time to fill out this feature request!**
-
-        We kindly ask that you search to see if an issue [already exists](https://github.com/kernelkit/infix/issues?q=is%3Aissue+sort%3Acreated-desc+) for your feature.  We are also happy to accept contributions from our users. For details see [CONTRIBUTING](https://github.com/kernelkit/infix/blob/master/.github/CONTRIBUTING.md).
-
-  - type: textarea
-    attributes:
-      label: Description
-      description: |
-        A clear and concise description of the problem or missing feature.
-        **Example:** *I'm always frustrated when [...]*, or *I'd like to see support for [...]*
-    validations:
-      required: true
-
-  - type: textarea
-    attributes:
-      label: Additional Information
-      description: |
-        Any other related information, e.g. existing YANG model(s), or possibly screenshots about the feature request here.
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: General Information
-      description: |
-        Appended to all feature requests for future readers.
-      value: |
-        Anyone can help out by [sponsoring][1] development of new features or [contributing][2] pull requests.
-        Please use this issue for discussions related to the feature.
-      
-        [1]: https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md
-        [2]: https://github.com/kernelkit/infix/blob/main/.github/CONTRIBUTING.md
-    validations:
-      required: true

.github/SECURITY.md

@@ -1,26 +0,0 @@
-# Security Policy
-
-## Reporting a Vulnerability
-
-If you discover a security vulnerability in Infix, please use GitHub's built-in
-[Report a Vulnerability](https://github.com/kernelkit/infix/security/advisories/new)
-feature for a private and secure disclosure.
-
-When reporting, include:
-
-- A clear description of the vulnerability.
-- Steps to reproduce the issue.
-- Potential impact of the vulnerability.
-
-## Supported Versions
-
-We provide security updates only for the main branch.
-
-Individual support contracts are provided by _Wires_. See
-[Support](https://github.com/kernelkit/infix/blob/main/.github/SUPPORT.md)
-for more information.
-
-## Acknowledgments
-
-We appreciate the efforts of the security community to help improve the security
-of Infix. Thank you for your responsible disclosure.

.github/SUPPORT.md

@@ -1,14 +1 @@
-Limited free support is only available using the online resources of the
-project on GitHub, and Discord, see <https://github.com/kernelkit/infix>:
-
-&nbsp;&nbsp; :house: <https://www.kernelkit.org> — home page, blog, news, howto's and tutorials  
-&nbsp;&nbsp; :package: <https://github.com/kernelkit/infix/releases/latest> — latest release  
-&nbsp;&nbsp; :speech_balloon: <https://github.com/orgs/kernelkit/discussions>  
-&nbsp;&nbsp; :bug: <https://github.com/kernelkit/infix/issues>  
-
-Support contracts, development of new features, fast-tracking of reviews
-and contributions, customer branding of Infix, and even customer specific
-features for dedicated products is provided by _Wires_.
-
-&nbsp;&nbsp; :globe_with_meridians: <https://www.wires.se>  
-&nbsp;&nbsp; :e-mail: <mailto:infix@wires.se>
+Paid support and development provided by Addiva Elektronik <https://addiva.se>

.github/pull_request_template.md

@@ -1,3 +1,5 @@
+<!--- **Summarize** your changes in the title above -->
+
 ## Description
 
 <!--
@@ -5,9 +7,15 @@
   -- Remember: assign a reviewer, or use @mentions if org. member.
   -->
 
+
+## Other information
+
+<!-- Other relevant info, e.g., before/after screenshots -->
+
+
 ## Checklist
 
-Tick *relevant* boxes, this PR is-a or has-a:
+Tick relevant boxes, this PR is-a or has-a:
 
 - [ ] Bugfix
   - [ ] Regression tests
@@ -17,12 +25,13 @@ Tick *relevant* boxes, this PR is-a or has-a:
   - [ ] Regression tests added?
   - [ ] ChangeLog updates (for next release)
   - [ ] Documentation added?
-- [ ] Test changes
-  - [ ] Checked in changed Readme.adoc (make test-spec)
-  - [ ] Added new test to group Readme.adoc and yaml file
 - [ ] Code style update (formatting, renaming)
 - [ ] Refactoring (please detail in commit messages)
 - [ ] Build related changes
 - [ ] Documentation content changes
-  - [ ] ChangeLog updated (for major changes)
 - [ ] Other (please describe):
+
+
+## References
+
+<!-- Please list references to related issue(s) -->

.github/workflows/add-issue-to-project.yml

@@ -1,16 +0,0 @@
-name: Adds all issues to project Infix & C:o
-
-on:
-  issues:
-    types:
-      - opened
-
-jobs:
-  add-to-project:
-    name: Add issue to project Infix&co
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/add-to-project@v1.0.2
-        with:
-          project-url: https://github.com/orgs/kernelkit/projects/3
-          github-token: ${{ secrets.ADD_TO_PROJECT }}

.github/workflows/bitsign.yml

@@ -1,215 +0,0 @@
-name: bitSign Infix Release
-
-on:
-  workflow_dispatch:
-    inputs:
-      release_version:
-        description: 'Release version (e.g., v25.08.0)'
-        required: true
-        type: string
-  push:
-    branches: [ sign-with-bitsign ]
-
-jobs:
-  sign-infix-release:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-
-    - name: Validate release version format
-      id: validate
-      run: |
-        # Use default version for push events, input version for manual dispatch
-        if [ "${{ github.event_name }}" = "push" ]; then
-          VERSION="v25.08.0"
-          echo "Using default version for push trigger: $VERSION"
-        else
-          VERSION="${{ inputs.release_version }}"
-          echo "Using input version for manual trigger: $VERSION"
-        fi
-
-        # Check if version starts with 'v' and has proper format
-        if ! echo "$VERSION" | grep -qE '^v[0-9]+\.[0-9]+(\.[0-9]+)?(-alpha[0-9]*|-beta[0-9]*|-rc[0-9]*)?$'; then
-          echo "❌ Invalid version format. Expected format: vYY.MM(.PP)(-alphaN|-betaN|-rcN)"
-          echo "Examples: v25.08.0, v25.08.0-alpha1, v25.08.0-rc1"
-          exit 1
-        fi
-
-        # Extract version without 'v' prefix for filename
-        FILE_VERSION="${VERSION#v}"
-        FILENAME="infix-x86_64-${FILE_VERSION}.tar.gz"
-        RELEASE_URL="https://github.com/kernelkit/infix/releases/download/${VERSION}/${FILENAME}"
-
-        echo "✅ Version format valid"
-        echo "file_version=${FILE_VERSION}" >> $GITHUB_OUTPUT
-        echo "filename=${FILENAME}" >> $GITHUB_OUTPUT
-        echo "release_url=${RELEASE_URL}" >> $GITHUB_OUTPUT
-
-    - name: Download Infix release
-      run: |
-        RELEASE_URL="${{ steps.validate.outputs.release_url }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-
-        echo "Downloading Infix release: $FILENAME"
-        echo "From: $RELEASE_URL"
-
-        if ! curl -L "$RELEASE_URL" -o "$FILENAME" --fail --show-error --progress-bar; then
-          echo "❌ Failed to download release file from: $RELEASE_URL"
-          echo "Please verify that the release version exists and contains the x86_64 build."
-          echo "You can check available releases at: https://github.com/kernelkit/infix/releases"
-          exit 1
-        fi
-
-        # Verify download
-        if [ -f "$FILENAME" ] && [ -s "$FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$FILENAME" | awk '{print $5}')
-          echo "✅ Successfully downloaded: $FILENAME ($FILE_SIZE)"
-        else
-          echo "❌ Failed to download release file"
-          exit 1
-        fi
-
-    - name: Create signing request
-      id: create_request
-      run: |
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        RELEASE="infix-x86_64-${FILE_VERSION}"
-
-        echo "Creating signing request for $FILENAME..."
-        echo "RELEASE parameter: $RELEASE"
-
-        # Create signing request using bitSign API
-        RESPONSE=$(curl -s -X POST "https://portal.bitsign.se/api/v1/requests" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -F "file=@$FILENAME" \
-          -F "key=bit42-Demo1" \
-          -F "job=Infix-x86" \
-          -F "parameters={\"RELEASE\": \"$RELEASE\"}")
-
-        echo "API Response: $RESPONSE"
-
-        # Check if request was successful
-        if echo "$RESPONSE" | jq -e '.success == true' > /dev/null; then
-          REQUEST_ID=$(echo "$RESPONSE" | jq -r '.requestId')
-          echo "✅ Request created successfully with ID: $REQUEST_ID"
-          echo "request_id=$REQUEST_ID" >> $GITHUB_OUTPUT
-        else
-          echo "❌ Failed to create signing request"
-          echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-          exit 1
-        fi
-
-    - name: Wait for signing completion
-      id: wait_completion
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        echo "Waiting for signing completion for request: $REQUEST_ID"
-
-        # Poll status for up to 10 minutes (600 seconds) - longer timeout for larger files
-        MAX_WAIT=600
-        WAITED=0
-
-        while [ $WAITED -lt $MAX_WAIT ]; do
-          RESPONSE=$(curl -s -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/status" \
-            -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}")
-
-          STATUS=$(echo "$RESPONSE" | jq -r '.status')
-          echo "Current status: $STATUS (waited ${WAITED}s)"
-
-          if [ "$STATUS" = "completed" ]; then
-            echo "✅ Signing completed successfully!"
-            break
-          elif [ "$STATUS" = "failed" ]; then
-            echo "❌ Signing failed"
-            echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-            exit 1
-          fi
-
-          sleep 10
-          WAITED=$((WAITED + 10))
-        done
-
-        if [ $WAITED -ge $MAX_WAIT ]; then
-          echo "❌ Timeout: Signing did not complete within ${MAX_WAIT} seconds"
-          exit 1
-        fi
-
-    - name: Download signed file
-      id: download_signed
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        SIGNED_FILENAME="infix-x86_64-${FILE_VERSION}-signed.tar.gz"
-
-        echo "Downloading signed file for request: $REQUEST_ID"
-        echo "Expected signed filename: $SIGNED_FILENAME"
-
-        # Download the signed file
-        curl -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/download" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -o "$SIGNED_FILENAME" \
-          --fail --show-error
-
-        if [ -f "$SIGNED_FILENAME" ] && [ -s "$SIGNED_FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$SIGNED_FILENAME" | awk '{print $5}')
-          echo "Successfully downloaded signed file: $SIGNED_FILENAME ($FILE_SIZE)"
-          echo "signed_filename=$SIGNED_FILENAME" >> $GITHUB_OUTPUT
-
-          # Calculate SHA256 checksums for both files
-          ORIGINAL_SHA256=$(sha256sum "$FILENAME" | cut -d' ' -f1)
-          SIGNED_SHA256=$(sha256sum "$SIGNED_FILENAME" | cut -d' ' -f1)
-          echo "original_sha256=$ORIGINAL_SHA256" >> $GITHUB_OUTPUT
-          echo "signed_sha256=$SIGNED_SHA256" >> $GITHUB_OUTPUT
-        else
-          echo "Failed to download signed file"
-          exit 1
-        fi
-
-    - name: Upload signed artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: signed-infix-${{ steps.validate.outputs.file_version }}
-        path: ${{ steps.download_signed.outputs.signed_filename }}
-        retention-days: 90
-
-    - name: Summary
-      run: |
-        # Determine the actual version used (could be from push or input)
-        if [ "${{ github.event_name }}" = "push" ]; then
-          ACTUAL_VERSION="v25.08.0"
-        else
-          ACTUAL_VERSION="${{ inputs.release_version }}"
-        fi
-
-        cat >> $GITHUB_STEP_SUMMARY << EOF
-        # bitSign Infix Release Signing Complete
-
-        The Infix release has been successfully signed using the bitSign API.
-
-        ## Signing Details
-
-        | Property | Value |
-        |----------|-------|
-        | 📦 **Original File** | \`${{ steps.validate.outputs.filename }}\` (\`${{ steps.download_signed.outputs.original_sha256 }}\`) |
-        | ✍️ **Signed File** | \`${{ steps.download_signed.outputs.signed_filename }}\` (\`${{ steps.download_signed.outputs.signed_sha256 }}\`) |
-        | 🔑 **Signing Key** | \`bit42-Demo1\` |
-        | ⚙️ **Job Type** | \`Infix-x86\` |
-        | 🆔 **Request ID** | \`${{ steps.create_request.outputs.request_id }}\` |
-        | 📋 **Release Version** | \`\$ACTUAL_VERSION\` |
-        | 🌐 **API Endpoint** | \`portal.bitsign.se\` |
-
-        ## Download Files
-
-        > **The signed release file is available as a workflow artifact:**
-        > **\`signed-infix-${{ steps.validate.outputs.file_version }}\`**
-        >
-        > The artifact contains the signed file: \`${{ steps.download_signed.outputs.signed_filename }}\`
-
-        ---
-
-        **Next Steps:** The signed release can now be distributed with cryptographic verification of authenticity.
-        EOF

.github/workflows/build-boot.yml

@@ -1,140 +0,0 @@
-name: Build Bootloaders
-
-on:
-  workflow_dispatch:
-    inputs:
-      branch:
-        description: 'Branch to build from'
-        default: 'main'
-        type: string
-
-jobs:
-  build:
-    name: Build ${{ matrix.defconfig }}
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        defconfig:
-          - aarch64_qemu_boot
-          - bpi_r3_sd_boot
-          - bpi_r3_emmc_boot
-          - bpi_r4_sd_boot
-          - bpi_r4_emmc_boot
-          - bpi_r64_sd_boot
-          - bpi_r64_emmc_boot
-          - cn9130_crb_boot
-          - fireant_boot
-          - nanopi_r2s_boot
-          - rpi2_boot
-          - rpi64_boot
-          - sama7g54_ek_emmc_boot
-          - sama7g54_ek_sd_boot
-    env:
-      MAKEFLAGS: -j5
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          ref: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.branch || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          defconfig=${{ matrix.defconfig }}
-          version=$(awk -F'"' '/BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE=/ {print $2}' configs/${defconfig}_defconfig)
-          version=${version:-git}
-          filename=$(echo "${defconfig}" | tr '_' '-')
-
-          # TODO: Replace hardcoded rev with actual revision stepping
-          rev="latest"
-
-          archive="${filename}-${version}-${rev}.tar.gz"
-          dirname="${filename}-${version}-${rev}"
-
-          echo "defconfig=${defconfig}" >> $GITHUB_OUTPUT
-          echo "version=${version}"     >> $GITHUB_OUTPUT
-          echo "rev=${rev}"             >> $GITHUB_OUTPUT
-          echo "archive=${archive}"     >> $GITHUB_OUTPUT
-          echo "dirname=${dirname}"     >> $GITHUB_OUTPUT
-
-          echo "Building ${defconfig}_defconfig, version ${version}-${rev}, artifact ${archive} ..."
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ matrix.defconfig }}
-          dl-prefix: dl-boot
-          ccache-prefix: ccache-boot
-
-      - name: Configure ${{ matrix.defconfig }}_defconfig
-        run: |
-          make ${{ matrix.defconfig }}_defconfig
-
-      - name: Build ${{ matrix.defconfig }}_defconfig
-        run: |
-          echo "Building ${{ matrix.defconfig }}_defconfig ..."
-          make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))
-
-      - name: Resulting size of build
-        run: |
-          printf "Size of output/images/: "
-          ls -l output/images/
-
-      - name: Prepare ${{ matrix.defconfig }} Artifact
-        run: |
-          cd output/
-          mv images ${{ steps.vars.outputs.dirname }}
-          tar cfz ${{ steps.vars.outputs.archive }} ${{ steps.vars.outputs.dirname }}/
-
-      - uses: actions/upload-artifact@v4
-        with:
-          path: output/${{ steps.vars.outputs.archive }}
-          name: artifact-${{ matrix.defconfig }}
-
-  publish:
-    name: Upload Bootloader Artifacts
-    runs-on: ubuntu-latest
-    needs: build
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Bootloader Build Complete! :rocket:
-
-          For the public download links of these bootloader artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest-boot>
-          EOF

.github/workflows/build-image.yml

@@ -1,344 +0,0 @@
-name: Create SD Card & eMMC Images
-
-on:
-  workflow_dispatch:
-    inputs:
-      board:
-        description: 'Board to create image for'
-        type: choice
-        required: true
-        options:
-          - raspberrypi-rpi2
-          - raspberrypi-rpi64
-          - bananapi-bpi-r3
-          - bananapi-bpi-r4
-          - bananapi-bpi-r64
-          - friendlyarm-nanopi-r2s
-          - microchip-sama7g54-ek
-        default: 'raspberrypi-rpi64'
-
-jobs:
-  create-image:
-    name: Create SD Card Image for ${{ inputs.board }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            genimage \
-            u-boot-tools \
-            parted \
-            gdisk \
-            qemu-utils \
-            dosfstools \
-            e2fsprogs \
-            genext2fs \
-            mtools \
-            jq
-
-      - name: Prepare build environment
-        run: |
-          # Set up directory structure similar to buildroot build
-          mkdir -p output/images
-          mkdir -p build
-
-      - name: Set bootloader and target based on board
-        run: |
-          case "${{ inputs.board }}" in
-            raspberrypi-rpi2)
-              echo "BOOTLOADER=rpi2-boot" >> $GITHUB_ENV
-              echo "ARCH=arm" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            raspberrypi-rpi64)
-              echo "BOOTLOADER=rpi64-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            bananapi-bpi-r3)
-              echo "BOOTLOADER_SD=bpi-r3-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=bpi-r3-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            bananapi-bpi-r4)
-              echo "BOOTLOADER_SD=bpi-r4-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=bpi-r4-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            bananapi-bpi-r64)
-              echo "BOOTLOADER_SD=bpi-r64-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=bpi-r64-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            friendlyarm-nanopi-r2s)
-              echo "BOOTLOADER=nanopi-r2s-boot" >> $GITHUB_ENV
-              echo "ARCH=aarch64" >> $GITHUB_ENV
-              echo "BUILD_EMMC=false" >> $GITHUB_ENV
-              ;;
-            microchip-sama7g54-ek)
-              echo "BOOTLOADER_SD=sama7g54-ek-sd-boot" >> $GITHUB_ENV
-              echo "BOOTLOADER_EMMC=sama7g54-ek-emmc-boot" >> $GITHUB_ENV
-              echo "ARCH=arm" >> $GITHUB_ENV
-              echo "BUILD_EMMC=true" >> $GITHUB_ENV
-              ;;
-            *)
-              echo "Error: Unknown board ${{ inputs.board }}"
-              exit 1
-              ;;
-          esac
-          echo "Arch: $ARCH for board: ${{ inputs.board }}"
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "Building both SD and eMMC images"
-            echo "SD Bootloader: $BOOTLOADER_SD"
-            echo "eMMC Bootloader: $BOOTLOADER_EMMC"
-          else
-            echo "Building SD image only"
-            echo "Bootloader: $BOOTLOADER"
-          fi
-
-      - name: Download bootloader artifacts
-        run: |
-          # Download bootloader from latest-boot release tag
-          if [ "$BUILD_EMMC" = "true" ]; then
-            # Download both SD and eMMC bootloaders for boards that support both
-            echo "Downloading SD bootloader: ${BOOTLOADER_SD}"
-            gh release download latest-boot --pattern "*${BOOTLOADER_SD}*" --dir temp_bootloader_sd/
-            mkdir -p output_sd/images
-            cd temp_bootloader_sd/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_sd/images/
-            cd ../
-            rm -rf temp_bootloader_sd/
-
-            echo "Downloading eMMC bootloader: ${BOOTLOADER_EMMC}"
-            gh release download latest-boot --pattern "*${BOOTLOADER_EMMC}*" --dir temp_bootloader_emmc/
-            mkdir -p output_emmc/images
-            cd temp_bootloader_emmc/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_emmc/images/
-            cd ../
-            rm -rf temp_bootloader_emmc/
-
-            echo "SD bootloader files:"
-            ls -la output_sd/images/
-            echo "eMMC bootloader files:"
-            ls -la output_emmc/images/
-          else
-            # Single bootloader for boards that only support SD
-            gh release download latest-boot --pattern "*${BOOTLOADER}*" --dir temp_bootloader/
-
-            # Extract bootloader directly to output/images
-            cd temp_bootloader/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-            cd ../
-            rm -rf temp_bootloader/
-
-            echo "Bootloader files extracted to output/images:"
-            ls -la output/images/
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Download Infix artifacts
-        run: |
-          # Download from latest Kernelkit Trigger workflow for main branch
-          gh run list --workflow=164295764 --branch=main --limit=1 --status=success --json databaseId --jq '.[0].databaseId' > latest_infix_run_id
-          INFIX_RUN_ID=$(cat latest_infix_run_id)
-
-          if [ "$BUILD_EMMC" = "true" ]; then
-            # Copy Infix artifacts to both SD and eMMC output directories
-            gh run download ${INFIX_RUN_ID} --name artifact-${ARCH} --dir temp_infix/
-
-            cd temp_infix/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_sd/images/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output_emmc/images/
-            cd ../
-            rm -rf temp_infix/
-
-            echo "Infix files extracted to output_sd/images:"
-            ls -la output_sd/images/
-            echo "Infix files extracted to output_emmc/images:"
-            ls -la output_emmc/images/
-          else
-            # Single output directory for SD-only boards
-            gh run download ${INFIX_RUN_ID} --name artifact-${ARCH} --dir temp_infix/
-
-            # Extract Infix directly to output/images
-            cd temp_infix/
-            tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-            cd ../
-            rm -rf temp_infix/
-
-            echo "Infix files extracted to output/images:"
-            ls -la output/images/
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Verify extracted files
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "Files available for SD image:"
-            ls -la output_sd/images/
-            echo ""
-            echo "Files available for eMMC image:"
-            ls -la output_emmc/images/
-          else
-            echo "Files available for mkimage.sh:"
-            ls -la output/images/
-            echo ""
-            echo "File types:"
-            file output/images/* || true
-          fi
-
-      - name: Create SD card image
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            export BINARIES_DIR=$PWD/output_sd/images
-            export BUILD_DIR=$PWD/build
-            export BR2_EXTERNAL_INFIX_PATH=$PWD
-            export RELEASE=""
-            export INFIX_ID="infix"
-            ./utils/mkimage.sh -t sdcard ${{ inputs.board }}
-          else
-            export BINARIES_DIR=$PWD/output/images
-            export BUILD_DIR=$PWD/build
-            export BR2_EXTERNAL_INFIX_PATH=$PWD
-            export RELEASE=""
-            export INFIX_ID="infix"
-            ./utils/mkimage.sh -t sdcard ${{ inputs.board }}
-          fi
-
-      - name: Create eMMC image
-        if: ${{ env.BUILD_EMMC == 'true' }}
-        run: |
-          export BINARIES_DIR=$PWD/output_emmc/images
-          export BUILD_DIR=$PWD/build
-          export BR2_EXTERNAL_INFIX_PATH=$PWD
-          export RELEASE=""
-          export INFIX_ID="infix"
-          ./utils/mkimage.sh -t emmc ${{ inputs.board }}
-
-      - name: Verify created images
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            echo "SD card image:"
-            ls -lh output_sd/images/*-sdcard.img* 2>/dev/null || true
-            if ls output_sd/images/*-sdcard.img 1> /dev/null 2>&1; then
-              for img in output_sd/images/*-sdcard.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null | head -20
-              done
-            fi
-
-            echo ""
-            echo "eMMC image:"
-            ls -lh output_emmc/images/*-emmc.img* 2>/dev/null || true
-            if ls output_emmc/images/*-emmc.img 1> /dev/null 2>&1; then
-              for img in output_emmc/images/*-emmc.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null | head -20
-              done
-            fi
-
-            # Copy both images to output/images for artifact upload
-            mkdir -p output/images
-            cp output_sd/images/*-sdcard.img* output/images/ 2>/dev/null || true
-            cp output_emmc/images/*-emmc.img* output/images/ 2>/dev/null || true
-          else
-            echo "Contents of output/images after mkimage.sh:"
-            ls -lh output/images/
-
-            # Look for SD card image with pattern: *-sdcard.img
-            if ls output/images/*-sdcard.img 1> /dev/null 2>&1; then
-              echo "Found SD card image(s):"
-              for img in output/images/*-sdcard.img; do
-                echo "- $(basename $img)"
-                file "$img"
-                fdisk -l "$img" 2>/dev/null || true
-              done
-            else
-              echo "No SD card image found matching pattern: *-sdcard.img"
-              echo "Available files:"
-              ls -la output/images/
-              exit 1
-            fi
-          fi
-
-      - name: Upload images as artifacts
-        uses: actions/upload-artifact@v4
-        with:
-          name: images-${{ inputs.board }}
-          path: |
-            output/images/*-sdcard.img*
-            output/images/*-emmc.img*
-          retention-days: 30
-
-      - name: Create checksums
-        run: |
-          cd output/images/
-          for file in *-sdcard.img *-emmc.img; do
-            if [ -f "$file" ]; then
-              sha256sum "$file" > "$file.sha256"
-            fi
-          done
-
-      - name: Upload to release
-        uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "output/images/*-sdcard.img*,output/images/*-emmc.img*"
-
-      - name: Generate summary
-        run: |
-          if [ "$BUILD_EMMC" = "true" ]; then
-            cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # SD Card & eMMC Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Arch:** ${{ env.ARCH }}
-          **SD Bootloader:** ${{ env.BOOTLOADER_SD }}
-          **eMMC Bootloader:** ${{ env.BOOTLOADER_EMMC }}
-          **Bootloader Source:** latest-boot release
-          **Infix Source:** Latest workflow run on main
-
-          ## Created Images
-          $(find output/images/ -name "*.img" -o -name "*.img.bmap" | xargs ls -lh 2>/dev/null | awk '{print "- " $9 " (" $5 ")"}' || echo "- No images found")
-
-          ## Download
-          Both SD card and eMMC images are available as workflow artifacts above and in the latest-boot release.
-          EOF
-          else
-            cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # SD Card Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Arch:** ${{ env.ARCH }}
-          **Bootloader:** ${{ env.BOOTLOADER }}
-          **Bootloader Source:** latest-boot release
-          **Infix Source:** Latest workflow run on main
-
-          ## Created Images
-          $(find output/images/ -name "*.img" -o -name "*.img.bmap" | xargs ls -lh 2>/dev/null | awk '{print "- " $9 " (" $5 ")"}' || echo "- No images found")
-
-          ## Download
-          The SD card image is available as a workflow artifact above.
-          EOF
-          fi

.github/workflows/build-release.yml

@@ -1,97 +0,0 @@
-# Needed for make pkg-stats
-# sudo apt install python3-aiohttp
----
-name: Build Release
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      use_cache:
-        required: false
-        type: boolean
-        default: true
-
-jobs:
-  build:
-    name: Build Infix ${{ inputs.version }} [${{ matrix.target }}]
-    runs-on: [self-hosted, release]
-    strategy:
-      matrix:
-        target: [aarch64, arm, x86_64]
-      fail-fast: false
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          clean: true
-          submodules: recursive
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Set Release Variables
-        id: vars
-        run: |
-          ver=${{ inputs.version }}
-          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          fver=${ver#v}
-          target=${{ matrix.target }}-${fver}
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ matrix.target }}
-          enabled: ${{ inputs.use_cache }}
-
-      - name: Configure & Build
-        env:
-          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
-        run: |
-          target=${{ matrix.target }}_defconfig
-          echo "Building $target ..."
-          make $target
-          make
-
-      - name: Generate SBOM from Build
-        run: |
-          # Generate manifest files in CSV format for CycloneDX
-          make legal-info
-          # Generate cpe.json for CycloneDX
-          make -s show-info > output/cpe.json
-          # Generate pkg-stats.{json,html} for humans
-          make pkg-stats
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Prepare Artifacts
-        run: |
-          cd output/
-
-          # Collect relevant files for SBOM and CPE info. for more info, see:
-          # https://github.com/CycloneDX/cyclonedx-buildroot
-          mkdir               images/sbom
-          mv pkg-stats.*      images/sbom/
-          mv cpe.json         images/sbom/
-          mv legal-info/*.csv images/sbom/
-
-          # Remove rootfs.squashfs from release (can be extracted from rootfs.itb)
-          # Saves ~131MB per architecture. See issue #858
-          rm -f images/rootfs.squashfs
-
-          mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-${{ matrix.target }}
-          path: output/*.tar.gz
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-disk-image-${{ matrix.target }}
-          path: output/images/*.qcow2

.github/workflows/build.yml

@@ -1,184 +1,103 @@
-name: Build
+name: Bob the Builder
 
 on:
+  push:
+    branches:
+      - main
   workflow_dispatch:
-    inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
-        default: true
-        type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
 
 jobs:
   build:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
+    name: Build Infix ${{ matrix.platform }}
+    runs-on: ubuntu-latest
     strategy:
+      matrix:
+        platform: [aarch64, x86_64]
       fail-fast: false
-    outputs:
-      build_id: ${{ steps.vars.outputs.INFIX_BUILD_ID }}
     steps:
-      - name: Cleanup Build Folder
+      - name: Maintenance
         run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
-
+          docker image prune -af
+          docker volume prune -f
+          docker container prune -f
+      - uses: actions/checkout@v4
       - name: Set Build Variables
         id: vars
         run: |
-          if [ -n "${{ github.event.pull_request.head.sha }}" ]; then
-              # Since PRs are built from an internally generated merge
-              # commit, reverse lookups of PRs and/or commits from
-              # image version information are cumbersome.  Therefore:
-              # explicitly set a build id that references both the PR
-              # and the commit.
-              printf "INFIX_BUILD_ID=pr%d.%.7s\n" \
-                  "${{ github.event.number }}" "${{ github.event.pull_request.head.sha }}" \
-                  | tee -a $GITHUB_OUTPUT $GITHUB_ENV
-          fi
-
-          target=${{ env.TARGET }}
-          name=${{ env.NAME }}
-          echo "dir=${name}-${target}"        >> $GITHUB_OUTPUT
-          echo "tgz=${name}-${target}.tar.gz" >> $GITHUB_OUTPUT
-          echo "Building target ${target}_defconfig"
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Prepare parallel build
-        id: parallel
-        run: |
-
-          if [ "$PARALLEL" == "true" ]; then
-             echo "BR2_PER_PACKAGE_DIRECTORIES=y" >> output/.config
-             MAKE="make -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
-             echo "Building in parallel with -j$((`getconf _NPROCESSORS_ONLN` / 2 + 2))"
+          target=${{ matrix.platform }}
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
+          if [ "$target" = x86_64 ]; then
+              echo "out=$PWD/output"      >> $GITHUB_OUTPUT
           else
-             echo "Disabling parallel build"
-             MAKE="make"
+              echo "out=/mnt/x-$target"   >> $GITHUB_OUTPUT
           fi
-          echo "MAKE=$MAKE" >> $GITHUB_OUTPUT
-
-      - name: Build ${{ env.TARGET }}
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-${{ matrix.platform }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.platform }}-
+            ccache-
+      - name: Configure & Build
         run: |
-          echo "Building ${{ env.TARGET }}_defconfig ..."
-          eval "${{ steps.parallel.outputs.MAKE }}"
-
-      - name:  Check SBOM from Build
+          target=${{ matrix.platform }}_defconfig
+          echo "Building $target ..."
+          sudo mkdir ${{ steps.vars.outputs.out }}
+          sudo chown $(id -un):$(id -gn) ${{ steps.vars.outputs.out }}
+          export O=${{ steps.vars.outputs.out }}
+          make $target
+          make
+      - name: Prepare Artifact
         run: |
-          make legal-info
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Resulting size of build
-        run: |
-          printf "Size of complete tree : "
-          du -sh .
-          printf "Size of output/       : "
-          du -sh output
-          printf "Size of dl/           : "
-          du -sh dl
-          printf "Size of output/images/: "
-          ls -l output/images/
-
-      - name: Prepare ${{ env.TARGET }} Artifact
-        run: |
-          cd output/
+          cd ${{ steps.vars.outputs.out }}
           mv images ${{ steps.vars.outputs.dir }}
           ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
+          tar chfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+      - name: Test
+        if: matrix.platform == 'x86_64'
+        run: |
+          export O=${{ steps.vars.outputs.out }}
+          make test-qeneth
       - uses: actions/upload-artifact@v4
         with:
-          path: output/${{ steps.vars.outputs.tgz }}
-          name: artifact-${{ env.TARGET }}
+          path: ${{ steps.vars.outputs.out }}/${{ steps.vars.outputs.tgz }}
+          name: artifact-${{ matrix.platform }}
+  release:
+    if: ${{github.repository_owner == 'kernelkit' && github.ref_name == 'main'}}
+    name: Upload Latest Build
+    needs: build
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+      - uses: actions/download-artifact@v4
+        with:
+          pattern: "artifact-*"
+          merge-multiple: true
+      - uses: ncipollo/release-action@v1
+        with:
+          allowUpdates: true
+          omitName: true
+          omitBody: true
+          omitBodyDuringUpdate: true
+          prerelease: true
+          tag: "latest"
+          token: ${{ secrets.GITHUB_TOKEN }}
+          artifacts: "*.tar.gz"
+      - name: Summary
+        run: |
+          cat <<EOF >> $GITHUB_STEP_SUMMARY
+          # Latest Build Complete! :rocket:
+          
+          For the public download links of these build artifacts, please see:
+           <https://github.com/kernelkit/infix/releases/tag/latest>
+          EOF

.github/workflows/check-kernel-release.yml

@@ -1,140 +0,0 @@
-name: Check Kernel 6.18 Release
-
-on:
-  schedule:
-    - cron: '0 3 * * *'
-  workflow_dispatch:
-
-jobs:
-  check-kernel:
-    if: github.repository == 'kernelkit/infix'
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out infix repository
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Fetch kernel.org and check for 6.18 release
-        id: check
-        run: |
-          set -e -o pipefail
-          # Fetch the kernel.org frontpage and extract 6.18 version
-          CURRENT_VERSION=$(curl -s https://www.kernel.org/ | grep -oP '6\.18\.\d+' | head -n1)
-
-          if [ -z "$CURRENT_VERSION" ]; then
-            echo "Failed to fetch kernel version"
-            exit 1
-          fi
-
-          echo "current_version=$CURRENT_VERSION" >> $GITHUB_OUTPUT
-          echo "Current 6.18 kernel version: $CURRENT_VERSION"
-
-          # Get the version from infix defconfig
-          INFIX_VERSION=$(grep 'BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE=' configs/aarch64_defconfig | cut -d'"' -f2)
-
-          echo "infix_version=$INFIX_VERSION" >> $GITHUB_OUTPUT
-          echo "Infix kernel version: $INFIX_VERSION"
-
-          if [ "$CURRENT_VERSION" != "$INFIX_VERSION" ]; then
-            # Check if there's already an open PR for this version
-            PR_EXISTS=$(gh pr list --state open --search "Upgrade to kernel $CURRENT_VERSION in:title" --json number --jq 'length')
-
-            if [ "$PR_EXISTS" -gt 0 ]; then
-              echo "new_release=false" >> $GITHUB_OUTPUT
-              echo "PR already exists for kernel $CURRENT_VERSION, skipping"
-            else
-              echo "new_release=true" >> $GITHUB_OUTPUT
-              echo "🎉 New 6.18 kernel released: $CURRENT_VERSION (infix version: $INFIX_VERSION)"
-            fi
-          else
-            echo "new_release=false" >> $GITHUB_OUTPUT
-            echo "No change - still at $CURRENT_VERSION"
-          fi
-        env:
-          GH_TOKEN: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Generate branch name
-        if: steps.check.outputs.new_release == 'true'
-        id: branch
-        run: |
-          BRANCH_NAME="kernel-upgrade-$(uuidgen | tr '[:upper:]' '[:lower:]')"
-          echo "name=$BRANCH_NAME" >> $GITHUB_OUTPUT
-          echo "Branch name: $BRANCH_NAME"
-
-      - name: Import GPG key
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          # Import the GPG key
-          echo "${{ secrets.AEL_BOT_GPG_PRIVATE_KEY }}" | gpg --batch --import
-
-          # Get the key ID
-          GPG_KEY_ID=$(gpg --list-secret-keys --keyid-format=long | grep '^sec' | head -1 | awk '{print $2}' | cut -d'/' -f2)
-          echo "GPG_KEY_ID=$GPG_KEY_ID" >> $GITHUB_ENV
-
-          # Configure GPG agent for non-interactive use
-          echo "allow-loopback-pinentry" >> ~/.gnupg/gpg-agent.conf
-          echo "pinentry-mode loopback" >> ~/.gnupg/gpg.conf
-          gpg-connect-agent reloadagent /bye || true
-
-      - name: Set up git credentials
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          set -e -o pipefail
-          git config --global user.email "ael-bot@users.noreply.github.com"
-          git config --global user.name "ael-bot"
-          git config --global commit.gpgsign true
-          git config --global user.signingkey ${{ env.GPG_KEY_ID }}
-
-          # Configure git to use the token for HTTPS operations
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "git@github.com:"
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "https://github.com/"
-
-      - name: Run kernel upgrade script
-        if: steps.check.outputs.new_release == 'true'
-        env:
-          GIT_TERMINAL_PROMPT: 0
-          BRANCH_NAME: ${{ steps.branch.outputs.name }}
-        run: |
-          set -e -o pipefail
-          ./utils/kernel-upgrade.sh linux 6.18 "$BRANCH_NAME"
-
-      - name: Create pull request
-        if: steps.check.outputs.new_release == 'true'
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-          script: |
-            const { data: pulls } = await github.rest.pulls.list({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              head: `${context.repo.owner}:kernel-upgrade`,
-              state: 'open'
-            });
-
-            if (pulls.length === 0) {
-              const { data: pr } = await github.rest.pulls.create({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                title: `Upgrade to kernel ${{ steps.check.outputs.current_version }}`,
-                head: '${{ steps.branch.outputs.name }}',
-                base: 'main',
-                body: `Automated kernel upgrade to version ${{ steps.check.outputs.current_version }}.\n\n**Previous version:** ${{ steps.check.outputs.infix_version }}\n**New version:** ${{ steps.check.outputs.current_version }}\n**Source:** https://www.kernel.org/\n\nThis PR was automatically created by the kernel release monitoring workflow.`
-              });
-
-              await github.rest.issues.addLabels({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                labels: ['ci:main']
-              });
-
-              await github.rest.pulls.requestReviewers({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                pull_number: pr.number,
-                reviewers: ['troglobit', 'wkz', 'mattiaswal']
-              });
-            }

.github/workflows/coverity.yml

@@ -2,14 +2,12 @@ name: Coverity Scan
 
 on:
   schedule:
-    - cron: '5 0 * * 6'
+    - cron: '5 0 * * *'
   workflow_dispatch:
 
 env:
   PROJECT_NAME: Infix
   CONTACT_EMAIL: troglobit@gmail.com
-  LIBYANG_VERSION: 4.2.2
-  SYSREPO_VERSION: 4.2.10
 
 jobs:
   coverity:
@@ -26,7 +24,6 @@ jobs:
                --post-data "token=$TOKEN&project=${PROJECT_NAME}&md5=1" \
                -O coverity-latest.tar.gz.md5
           echo "md5=$(cat coverity-latest.tar.gz.md5)" | tee -a $GITHUB_OUTPUT
-
       - uses: actions/cache@v4
         id: cache
         with:
@@ -36,7 +33,6 @@ jobs:
             ${{ runner.os }}-coverity-${{ steps.var.outputs.md5 }}
             ${{ runner.os }}-coverity-
             ${{ runner.os }}-coverity
-
       - name: Download Coverity Scan
         env:
           TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
@@ -51,39 +47,25 @@ jobs:
           fi
           mkdir coverity
           tar xzf coverity-latest.tar.gz --strip 1 -C coverity
-
       - name: Install dependencies
         run: |
           sudo apt-get -y update
           sudo apt-get -y install pkg-config libjansson-dev libev-dev \
-                       libcrypt-dev libglib2.0-dev libpcre2-dev       \
-                       libuev-dev libavahi-client-dev
-
+                       libaugeas-dev libglib2.0-dev libpcre2-dev      \
+                       libuev-dev libite-dev
       - name: Build dependencies
         run: |
-          git clone -b v${LIBYANG_VERSION} --depth 1 https://github.com/CESNET/libyang.git
-          for p in patches/libyang/${LIBYANG_VERSION}/*.patch; do
-            git -C libyang apply < "$p"
-          done
+          git clone https://github.com/CESNET/libyang.git
           mkdir libyang/build
           (cd libyang/build && cmake .. && make all && sudo make install)
-
-          git clone -b v${SYSREPO_VERSION} --depth 1 https://github.com/sysrepo/sysrepo.git
-          for p in patches/sysrepo/${SYSREPO_VERSION}/*.patch; do
-            git -C sysrepo apply < "$p"
-          done
+          git clone https://github.com/sysrepo/sysrepo.git
           mkdir sysrepo/build
           (cd sysrepo/build && cmake .. && make all && sudo make install)
-
-          git clone https://github.com/troglobit/libite.git
-          (cd libite && ./autogen.sh && ./configure && make && sudo make install)
           make dep
-
-      - name: Build applications for Coverity
+      - name: Check applications
         run: |
           export PATH=`pwd`/coverity/bin:$PATH
-          cov-build --dir cov-int make coverity
-
+          cov-build --dir cov-int make check
       - name: Submit results to Coverity Scan
         env:
           TOKEN: ${{ secrets.COVERITY_SCAN_TOKEN }}
@@ -96,7 +78,6 @@ jobs:
             --form version=$(git rev-parse HEAD) \
             --form description="${PROJECT_NAME} $(git rev-parse HEAD)" \
             https://scan.coverity.com/builds?project=${PROJECT_NAME}
-
       - name: Upload build.log
         uses: actions/upload-artifact@v4
         with:

.github/workflows/docs.yml

@@ -1,68 +0,0 @@
-name: User Guide Generator
-
-on:
-  push:
-    branches:
-      - doc
-      - main
-    tags:
-      - 'v*'
-    paths:
-      - 'doc/**'
-      - 'mkdocs.yml'
-      - '.github/workflows/docs.yml'
-
-permissions:
-  contents: write
-
-concurrency:
-  group: "docs-${{ github.ref }}"
-  cancel-in-progress: false
-
-jobs:
-  docs:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: Setup Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.x'
-
-      - name: Install dependencies
-        run: |
-          pipx install mkdocs
-          pipx inject mkdocs mkdocs-material
-          pipx inject mkdocs pymdown-extensions
-          pipx inject mkdocs mkdocs-callouts
-          pipx inject mkdocs mike
-          pipx inject mkdocs mkdocs-to-pdf
-          pipx inject mkdocs mkdocs-glightbox
-          # Workaround, if pipx inject fails to install symlink
-          ln -s "$(pipx environment -V PIPX_LOCAL_VENVS)/mkdocs/bin/mike" \
-                "$(pipx environment -V PIPX_BIN_DIR)/mike" || true
-
-      - name: Configure Git
-        run: |
-          git config --global user.name "github-actions[bot]"
-          git config --global user.email "github-actions[bot]@users.noreply.github.com"
-
-      - name: Deploy dev version
-        if: github.event_name == 'push' && (github.ref == 'refs/heads/doc' || github.ref == 'refs/heads/main')
-        run: |
-          mike deploy --push --update-aliases dev latest
-          mike set-default --push latest
-
-      - name: Deploy tagged version
-        if: github.event_name == 'push' && startsWith(github.ref, 'refs/tags/v')
-        run: |
-          TAG=${GITHUB_REF#refs/tags/v}
-          # Extract YEAR.MONTH from tag (e.g., v25.06.0-beta1 -> 25.06)
-          VERSION=$(echo $TAG | sed -E 's/^([0-9]+\.[0-9]+)(\.[0-9]+)?(-.*)?$/\1/')
-          echo "Deploying tag $TAG as docs version $VERSION"
-          mike deploy --push --update-aliases $VERSION latest
-          mike set-default --push latest

.github/workflows/generic-x86-build.yml

@@ -1,84 +0,0 @@
-name: Generic X86 GitHub Build
-
-on:
-  push:
-
-jobs:
-  build:
-    if: github.repository != 'kernelkit/infix'
-    name: Infix x86_64
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Free Disk Space
-        uses: jlumbroso/free-disk-space@main
-        with:
-          tool-cache: true
-          android: true
-          dotnet: true
-          haskell: true
-          large-packages: true
-          docker-images: true
-          swap-storage: false
-
-      - name: Install build dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            bc binutils build-essential bzip2 cpio \
-            diffutils file findutils git gzip \
-            libncurses-dev libssl-dev perl patch \
-            python3 rsync sed tar unzip wget \
-            autopoint bison flex autoconf automake \
-            mtools
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ github.repository }}
-          ref: ${{ github.ref }}
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          echo "INFIX_BUILD_ID=${{ github.run_id }}" >> $GITHUB_OUTPUT
-          echo "dir=Infix-x86_64" >> $GITHUB_OUTPUT
-          echo "tgz=Infix-x86_64.tar.gz" >> $GITHUB_OUTPUT
-
-      - name: Configure x86_64_minimal
-        run: |
-          make x86_64_minimal_defconfig
-
-      - name: Unit Test x86_64
-        run: |
-          make test-unit
-
-      - name: Build x86_64_minimal
-        run: |
-          make
-
-      - name: Check SBOM
-        run: |
-          make legal-info
-
-      - name: Report Build Size
-        run: |
-          du -sh .
-          du -sh output
-          du -sh dl || true
-          ls -l output/images/
-
-      - name: Prepare Artifact
-        run: |
-          cd output/
-          mv images Infix-x86_64
-          ln -s Infix-x86_64 images
-          tar cfz Infix-x86_64.tar.gz Infix-x86_64
-
-      - uses: actions/upload-artifact@v4
-        with:
-          path: output/Infix-x86_64.tar.gz
-          name: artifact-x86_64
-

.github/workflows/inventory.yml

@@ -45,10 +45,22 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v4
-      - uses: kernelkit/actions/cache-restore@v1
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
         with:
-          target: x86_64
-          dl-prefix: dl-netconf
+          path: dl/
+          key: dl-netconf-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-netconf-
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-x86_64-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-x86_64-
+            ccache-
       - name: Disk inventory (2/2) ...
         run: |
           echo "df -h ========================================================================="

.github/workflows/publish.yml

@@ -1,44 +0,0 @@
-name: Publish latest Infix
-
-on:
-  workflow_dispatch:
-  workflow_call:
-
-jobs:
-  publish:
-    name: Upload Latest Build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums ...
-        run: |
-          for file in *.tar.gz; do
-              sha256sum $file > $file.sha256
-          done
-
-      - uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          replacesArtifacts: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "*.tar.gz*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Latest Build Complete! :rocket:
-
-          For the public download links of these build artifacts, please see:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-          EOF

.github/workflows/regression.yml

@@ -0,0 +1,77 @@
+name: Reggie Regression
+
+on:
+  push:
+    branches:
+      - '*'
+  pull_request:
+    branches:
+      - '*'
+  workflow_dispatch:
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.head_ref || github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  build:
+    name: Regression Testing
+    runs-on: self-hosted
+    if: github.event_name != 'pull_request' || github.event.pull_request.head.repo.full_name != github.event.pull_request.base.repo.full_name
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: 'true'
+      - name: Clean up cruft ...
+        run: |
+          ./test/env -c
+      - name: Set Build Variables
+        id: vars
+        run: |
+          target=x86_64
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-netconf-${{ hashFiles('.git/modules/buildroot/refs/heads/master', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-netconf-
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-x86_64-${{ hashFiles('.git/modules/buildroot/refs/head/master', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-x86_64-
+            ccache-
+      - name: Configure NETCONF
+        run: |
+          make x86_64_defconfig
+
+      - name: Unit Test
+        run: make test-unit
+
+      - name: Build
+        run: |
+          make
+      - name: Prepare Artifact
+        run: |
+          cd output
+          mv images ${{ steps.vars.outputs.dir }}
+          ln -s ${{ steps.vars.outputs.dir }} images
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+      - name: Upload Artifact
+        uses: actions/upload-artifact@v4
+        with:
+          path: output/${{ steps.vars.outputs.tgz }}
+
+      - name: Regression Test
+        run: make test-qeneth
+
+      - name: Publish Test Result
+        # Ensure this runs even if Regression Test fails
+        if: always()
+        run: cat test/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY

.github/workflows/release.yml

@@ -18,42 +18,85 @@ on:
         type: string
 
 jobs:
-  set-version:
+  build:
     if: github.repository == 'kernelkit/infix' && startsWith(github.ref, 'refs/tags/')
+    name: Build Infix ${{ github.ref_name }} [${{ matrix.platform }}]
     runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.set-ver.outputs.version }}
+    strategy:
+      matrix:
+        platform: [aarch64, x86_64]
+      fail-fast: false
     steps:
-      - id: set-ver
+      - name: Maintenance
+        run: |
+          docker image prune -af
+          docker volume prune -f
+          docker container prune -f
+      - uses: actions/checkout@v4
+      - name: Set Release Variables
+        id: vars
         run: |
           if [ -n "${{ inputs.version }}" ]; then
               ver=${{ inputs.version }}
           else
               ver=${GITHUB_REF#refs/tags/}
           fi
-          echo "version=${ver}" >> $GITHUB_OUTPUT
-
-  build:
-    needs: set-version
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: ${{ needs.set-version.outputs.version }}
-      use_cache: true
+          echo "ver=${ver}" >> $GITHUB_OUTPUT
+          fver=${ver#v}
+          target=${{ matrix.platform }}-${fver}
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
+          echo "out=/mnt/x-$target"       >> $GITHUB_OUTPUT
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-${{ matrix.platform }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.platform }}-
+            ccache-
+      - name: Configure & Build
+        env:
+          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
+        run: |
+          target=${{ matrix.platform }}_defconfig
+          echo "Building $target ..."
+          sudo mkdir ${{ steps.vars.outputs.out }}
+          sudo chown $(id -un):$(id -gn) ${{ steps.vars.outputs.out }}
+          export O=${{ steps.vars.outputs.out }}
+          make $target
+          make
+      - name: Generate SBOM from Build
+        run: |
+          make legal-info
+      - name: Prepare Artifacts
+        run: |
+          cd ${{ steps.vars.outputs.out }}
+          mv images ${{ steps.vars.outputs.dir }}
+          ln -s ${{ steps.vars.outputs.dir }} images
+          tar chfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
 
+          mv legal-info legal-info-$target
+          tar chfz legal-info-$target.tar.gz legal-info-$target
+      - uses: actions/upload-artifact@v4
+        with:
+          name: artifact-${{ matrix.platform }}
+          path: ${{ steps.vars.outputs.out }}/*.tar.gz
   release:
     name: Release Infix ${{ github.ref_name }}
     needs: build
-    runs-on: [self-hosted, release]
+    runs-on: ubuntu-latest
     permissions:
       contents: write
-      discussions: write
     steps:
       - uses: actions/checkout@v4
-        with:
-          submodules: 'true'
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
       - name: Set Release Variables
         id: rel
         run: |
@@ -63,56 +106,44 @@ jobs:
               ver=${GITHUB_REF#refs/tags/}
           fi
           echo "ver=${ver}"     >> $GITHUB_OUTPUT
-          echo "cat="           >> $GITHUB_OUTPUT
           if echo $ver | grep -qE 'v[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
             echo "pre=true"     >> $GITHUB_OUTPUT
             echo "latest=false" >> $GITHUB_OUTPUT
-          elif echo $ver | grep -qE '^v[0-9]+\.[0-9]+(\.0)?$'; then
+          elif echo $ver | grep -qE '^v[0-9.]+\.[0-9.]+(\.[0-9]+)?$'; then
             echo "pre=false"    >> $GITHUB_OUTPUT
             echo "latest=true"  >> $GITHUB_OUTPUT
-            echo "cat=Releases" >> $GITHUB_OUTPUT
           else
             echo "pre=false"    >> $GITHUB_OUTPUT
             echo "latest=false" >> $GITHUB_OUTPUT
           fi
           echo "pre=${{ steps.rel.outputs.pre }}"
           echo "latest=${{ steps.rel.outputs.latest }}"
-
       - uses: actions/download-artifact@v4
         with:
           pattern: "artifact-*"
           merge-multiple: true
-
       - name: Create checksums ...
         run: |
           for file in *.tar.gz; do
               sha256sum $file > $file.sha256
           done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
       - name: Extract ChangeLog entry ...
         run: |
-          cat doc/ChangeLog.md | ./utils/extract-changelog.sh > release.md
+          awk '/^-----*$/{if (x == 1) exit; x=1;next}x' doc/ChangeLog.md \
+              |head -n -1 > release.md
           cat release.md
-
       - uses: ncipollo/release-action@v1
         with:
           name: Infix ${{ github.ref_name }}
           prerelease: ${{ steps.rel.outputs.pre }}
           makeLatest: ${{ steps.rel.outputs.latest }}
-          discussionCategory: ${{ steps.rel.outputs.cat }}
-          bodyFile: release.md
-          artifacts: "*.tar.gz*,*.qcow2*"
-
+          bodyFile:  release.md
+          artifacts: "*.tar.gz*"
       - name: Summary
         run: |
           cat <<EOF >> $GITHUB_STEP_SUMMARY
           # Infix ${{ github.ref_name }} Released! :rocket:
-
+          
           For the public download links of this release, please see:
            <https://github.com/kernelkit/infix/releases/tag/${{ github.ref_name }}>
           EOF

.github/workflows/sync-fork.yml

@@ -0,0 +1,28 @@
+# To enable automatic sync of your Infix fork every day, or on dispatch,
+# set the repoistory or organisation variable (not secret):
+#
+#     SYNC_FORK = true
+#
+# You also need a GH_SYNC_REPO token allowed to update workflows.  For
+# more information on variables and secrets, see the GitHub docs.
+# See https://docs.github.com/en/actions/learn-github-actions/variables
+name: Synchronize your fork of Infix with upstream
+
+on:
+  schedule:
+    - cron: 42 2 * * *
+  workflow_dispatch:
+
+jobs:
+  sync_fork:
+    if: ${{github.repository_owner != 'kernelkit' && vars.SYNC_FORK == 'true' }}
+    runs-on: ubuntu-latest
+    steps:
+      - uses: TobKed/github-forks-sync-action@master
+        with:
+          github_token: ${{ secrets.GH_SYNC_REPO }}
+          upstream_repository: KernelKit/infix
+          upstream_branch: main
+          target_branch: main
+          force: false
+          tags: true

.github/workflows/test.yml

@@ -1,137 +0,0 @@
-name: Test Infix
-
-on:
-  workflow_dispatch:
-    inputs:
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        required: false
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      ninepm-conf:
-        required: false
-        type: string
-        default: ''
-      test-path:
-        required: false
-        type: string
-        default: 'test'
-      pre_test_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-  NINEPM_CONF: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.ninepm-conf || inputs.ninepm-conf }}
-  TEST_PATH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.test-path || inputs.test-path }}
-
-jobs:
-  test:
-    name: Regression Test ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [self-hosted, regression]
-    steps:
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-test script
-        if: ${{ inputs.pre_test_script != '' }}
-        run: |
-          cat > ./pre-test.sh << 'EOF'
-          ${{ inputs.pre_test_script }}
-          EOF
-          chmod +x ./pre-test.sh
-          bash ./pre-test.sh
-
-      - name: Set Build Variables
-        id: vars
-        run: |
-          if [ -n "${{ needs.build.outputs.build_id }}" ]; then
-              echo "INFIX_BUILD_ID=${{ needs.build.outputs.build_id }}" \
-                   >>$GITHUB_ENV
-          fi
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Restore ${{ env.TARGET }} output/
-        run: |
-          target=${{ env.TARGET }}
-          name=${{ inputs.name }}
-
-          ls -l
-          mkdir -p output
-          mv ${name}-${target}.tar.gz output/
-          cd output/
-          tar xf ${name}-${target}.tar.gz
-          ln -s ${name}-${target} images
-
-      - name: Regression Test ${{ env.TARGET }}
-        run: |
-          if [ -n "$NINEPM_CONF" ]; then
-            export NINEPM_PROJ_CONFIG="${GITHUB_WORKSPACE}/$NINEPM_CONF"
-            echo "DEBUG: NINEPM_PROJ_CONFIG is '$NINEPM_PROJ_CONFIG'"
-          fi
-          make test
-
-      - name: Publish Test Result for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          cat $TEST_PATH/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY
-
-      - name: Generate Test Report for ${{ env.TARGET }}
-        # Ensure this runs even if Regression Test fails
-        if: always()
-        run: |
-          make test-dir="$(pwd)/$TEST_PATH" test-report
-
-      - name: Upload Test Report as Artifact
-        uses: actions/upload-artifact@v4
-        with:
-          name: test-report
-          path: output/images/test-report.pdf

.github/workflows/trigger.yml

@@ -1,91 +0,0 @@
-name: CI
-
-on:
-  pull_request:
-    types: [opened, synchronize, reopened, labeled]
-  push:
-    branches:
-      - main
-      - ci-work
-  workflow_dispatch:
-
-concurrency:
-  group: ci-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-
-jobs:
-  # Gate all builds through this check to prevent wasted runs.  Only run on
-  # 'labeled' events when the label is actually 'ci:main'.  Concurrency control
-  # above handles canceling the 'opened' event when 'labeled' arrives quickly
-  # after (e.g., when creating a PR with ci:main already attached). See #1154.
-  check-trigger:
-    if: |
-      startsWith(github.repository, 'kernelkit/') &&
-      (github.event_name != 'pull_request' ||
-       github.event.action != 'labeled' ||
-       github.event.label.name == 'ci:main')
-    runs-on: ubuntu-latest
-    outputs:
-      x86_64_target: ${{ steps.set-targets.outputs.x86_64_target }}
-      aarch64_target: ${{ steps.set-targets.outputs.aarch64_target }}
-      arm_target: ${{ steps.set-targets.outputs.arm_target }}
-    steps:
-      - run: |
-          echo "Triggering build, logging meta data ..."
-          echo "Event  : ${{ github.event_name }}"
-          echo "Action : ${{ github.event.action }}"
-          echo "Ref    : ${{ github.ref }}"
-          echo "PR     : ${{ github.event.pull_request.number }}"
-          echo "Label  : ${{ github.event.label.name }}"
-      - id: set-targets
-        run: |
-          if [[ "${{ github.event_name }}" == "pull_request" ]] &&           \
-             ! echo '${{ toJSON(github.event.pull_request.labels.*.name) }}' \
-             | grep -q "ci:main"; then
-            echo "x86_64_target=x86_64_minimal" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64_minimal" >> $GITHUB_OUTPUT
-            echo "arm_target=arm_minimal" >> $GITHUB_OUTPUT
-          else
-            echo "x86_64_target=x86_64" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64" >> $GITHUB_OUTPUT
-            echo "arm_target=arm" >> $GITHUB_OUTPUT
-          fi
-  unit-test:
-    needs: check-trigger
-    uses: ./.github/workflows/unit-test.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-x86_64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-
-  build-aarch64:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.aarch64_target }}
-
-  build-arm:
-    needs: [check-trigger, unit-test]
-    uses: ./.github/workflows/build.yml
-    with:
-      name: "infix"
-      target: ${{ needs.check-trigger.outputs.arm_target }}
-
-  test-run-x86_64:
-    needs: [check-trigger, build-x86_64]
-    uses: ./.github/workflows/test.yml
-    with:
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
-      name: "infix"
-
-  test-publish-x86_64:
-    if: ${{ github.repository_owner == 'kernelkit' && github.ref_name == 'main' }}
-    needs: test-run-x86_64
-    uses: ./.github/workflows/publish.yml

.github/workflows/unit-test.yml

@@ -1,116 +0,0 @@
-name: unit-test
-
-on:
-  workflow_dispatch:
-    inputs:
-      target:
-        description: "Build target (e.g. aarch64 or aarch64_minimal)"
-        default: "x86_64"
-        type: string
-      parallel:
-        description: 'Massive parallel build of each image'
-        default: true
-        type: boolean
-      name:
-        description: "Name (for spin overrides)"
-        default: "infix"
-        type: string
-      infix_repo:
-        description: 'Repo to checkout (for spin overrides)'
-        default: kernelkit/infix
-        type: string
-      infix_branch:
-        description: 'Branch/tag/commit to checkout (for spin overrides)'
-        default: ''
-        type: string
-
-  workflow_call:
-    inputs:
-      target:
-        required: true
-        type: string
-      name:
-        required: true
-        type: string
-      infix_repo:
-        required: false
-        type: string
-        default: kernelkit/infix
-      infix_branch:
-        required: false
-        type: string
-        default: ''
-        description: 'Branch/tag/commit to checkout (for spin overrides). Defaults to github.ref if not specified'
-      parallel:
-        required: false
-        type: boolean
-        default: true
-      pre_build_script:
-        required: false
-        type: string
-        default: ''
-        description: 'Optional script to run after checkout (for spin customization)'
-    secrets:
-      CHECKOUT_TOKEN:
-        required: false
-        description: 'Token for cross-repository access'
-
-env:
-  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
-  TARGET: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-  INFIX_REPO: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_repo || inputs.infix_repo }}
-  INFIX_BRANCH: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.infix_branch || inputs.infix_branch }}
-
-jobs:
-  unit-tests:
-    name: Build ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
-    runs-on: [ self-hosted, latest ]
-    env:
-      PARALLEL: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.parallel == 'true' || github.event_name != 'workflow_dispatch' && inputs.parallel == true }}
-    strategy:
-      fail-fast: false
-    steps:
-      - name: Cleanup Build Folder
-        run: |
-          ls -la ./
-          rm -rf ./* || true
-          rm -rf ./.??* || true
-          ls -la ./
-
-      - name: Checkout infix repo
-        uses: actions/checkout@v4
-        with:
-          repository: ${{ env.INFIX_REPO }}
-          ref: ${{ env.INFIX_BRANCH != '' && env.INFIX_BRANCH || github.ref }}
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-          token: ${{ secrets.CHECKOUT_TOKEN || github.token }}
-
-      - uses: kernelkit/actions/podman-cleanup@v1
-
-      - name: Run pre-build script
-        if: ${{ inputs.pre_build_script != '' }}
-        run: |
-          cat > ./pre-build.sh << 'EOF'
-          ${{ inputs.pre_build_script }}
-          EOF
-          chmod +x ./pre-build.sh
-          bash ./pre-build.sh
-
-      - uses: kernelkit/actions/cache-restore@v1
-        with:
-          target: ${{ env.TARGET }}
-
-      - name: Configure ${{ env.TARGET }}
-        run: |
-          make ${{ env.TARGET }}_defconfig
-
-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
-      - name: Unit Test ${{ env.TARGET }}
-        run: |
-          make test-unit

.github/workflows/weekly.yml

@@ -1,68 +0,0 @@
-# Weekly release build to catch flaky tests and verify clean builds.
-# Runs without caches (ccache) to ensure reproducibility. See issue #1003.
-name: Weekly Build
-
-on:
-  schedule:
-    - cron: '5 0 * * 6'  # Saturday at 00:05 UTC, same as Coverity
-  workflow_dispatch:
-
-jobs:
-  build:
-    if: github.repository == 'kernelkit/infix'
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: "latest"
-      use_cache: false
-
-  publish:
-    name: Publish Weekly Build
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums
-        run: |
-          for file in *.tar.gz; do
-            sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
-      - uses: ncipollo/release-action@v1
-        with:
-          tag: latest
-          name: "Latest Weekly Build"
-          prerelease: true
-          makeLatest: false
-          allowUpdates: true
-          removeArtifacts: true
-          body: |
-            Automated weekly build from `${{ github.sha }}`.
-
-            This build runs without caches to catch potential flaky tests and build issues.
-            Not intended for production use - use official releases instead.
-
-            **Commit:** ${{ github.sha }}
-            **Built:** ${{ github.run_id }}
-          artifacts: "*.tar.gz*,*.qcow2*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Weekly Build Published! :package:
-
-          Latest artifacts uploaded to:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-
-          Built from commit: \`${{ github.sha }}\`
-          EOF

.gitignore

@@ -1,8 +1,5 @@
 *~
-.claude
 .gdb_history
-.claude
-AGENTS.md
 /.backup
 /.ccache
 /dl
@@ -11,4 +8,3 @@ AGENTS.md
 /test/.venv
 /test/.log
 /local.mk
-/test/spec/Readme.adoc

Config.in

@@ -1,5 +1,3 @@
-source "$BR2_EXTERNAL_INFIX_PATH/board/Config.in"
-
 menu "Branding"
 
 config INFIX_VENDOR
@@ -54,20 +52,9 @@ config INFIX_IMAGE_ID
 	  Mandatory.  When INFIX_RELEASE is set, this string is appended to
 	  the IMAGE_ID with a '-' separator.
 
-config INFIX_COMPATIBLE
-	string "Operating system compatible string"
-	default "${INFIX_IMAGE_ID}"
-	help
-	  A lower-case string (no spaces or other characters outside of 0–9,
-	  a–z, ".", "_" and "-"), used for image identification at upgrade.
-	  E.g., the RAUC [system] compatible string.
-
-	  Mandatory.  Defaults to $INFIX_IMAGE_ID, which in turn is composed
-	  of $INFIX_ID-$BR2_ARCH.
-
 config INFIX_TAGLINE
 	string "Operating system tagline"
-	default "Infix OS — Immutable.Friendly.Secure"
+	default "Infix -- a Network Operating System"
 	help
 	  Mandatory. Used for identifying the OS, e.g. as PRETTY_NAME in
 	  /etc/os-release and description in the GNS3 appliance.
@@ -125,6 +112,10 @@ config INFIX_ARCH
 	default "riscv64" if BR2_riscv
 	default "x86_64"  if BR2_x86_64
 
+menu "Packages"
+
 source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/package/Config.in.host"
+
+endmenu
+
 source "$BR2_EXTERNAL_INFIX_PATH/board/common/Config.in"

Makefile

@@ -1,13 +1,8 @@
-export BR2_EXTERNAL ?= $(CURDIR)
+export BR2_EXTERNAL := $(CURDIR)
 export PATH         := $(CURDIR)/bin:$(PATH)
 
 ARCH ?= $(shell uname -m)
-O    ?= output
-
-# If a relative output path is specified, we have to translate it to
-# an absolute one before handing over control to Buildroot, which will
-# otherwise treat it as relative to ./buildroot.
-override O := $(if $(filter /%,$O),$O,$(CURDIR)/$O)
+O    ?= $(CURDIR)/output
 
 config := $(O)/.config
 bmake   = $(MAKE) -C buildroot O=$(O) $1
@@ -16,7 +11,8 @@ bmake   = $(MAKE) -C buildroot O=$(O) $1
 all: $(config) buildroot/Makefile
 	@+$(call bmake,$@)
 
-check dep coverity:
+check dep:
+	@echo "Starting local check, stage $@ ..."
 	@make -C src $@
 
 $(config):
@@ -32,11 +28,6 @@ $(config):
 legal-info: | buildroot/Makefile
 	$(call bmake,legal-info LINUX_LICENSE_FILES=COPYING)
 
-cyclonedx: | buildroot/Makefile
-	@echo "Generating package information..."
-	@$(MAKE) --no-print-directory -C buildroot O=$(O) show-info | ./buildroot/utils/generate-cyclonedx > $(O)/cyclonedx-sbom.json
-	@echo "CycloneDX SBOM generated: $(O)/cyclonedx-sbom.json"
-
 # Workaround, see board/x86_64/board.mk
 test:
 	@+$(call bmake,$@)
@@ -44,4 +35,4 @@ test:
 buildroot/Makefile:
 	@git submodule update --init
 
-.PHONY: all check coverity dep test cyclonedx
+.PHONY: all check test

README.md

@@ -1,78 +1,66 @@
-[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
+[![License Badge][]][License] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
 
-<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=480 padding=10>
+<img align="right" src="doc/logo.png" alt="Infix - Linux <3 NETCONF" width=480 border=10>
 
-Turn any ARM or x86 device into a powerful, manageable network appliance
-in minutes. From $35 Raspberry Pi boards to enterprise switches — deploy
-routers, IoT gateways, edge devices, or custom network solutions that
-just work.
+Infix is a free, Linux based, immutable Network Operating System (NOS)
+built on [Buildroot][1], and [sysrepo][2].  A powerful mix that ease
+porting to different platforms, simplify long-term maintenance, and
+provide made-easy management using NETCONF[^1] or the built-in command
+line interface (CLI) from a console or SSH login.
 
-## Our Values
+> Click the **▶ Example CLI Session** foldout below for an example, or
+> head on over to the [Infix Documentation](doc/README.md) for more
+> information on how to set up the system.
 
-**🔒 Immutable**  
-Your system never breaks.  Read-only filesystem with atomic upgrades
-means no configuration drift, no corrupted updates, and instant rollback
-if something goes wrong.  Deploy once, trust forever.
+Although primarily focused on switches and routers, the core values
+may be appealing for other use-cases as well:
 
-**🤝 Friendly**  
-Actually easy to use. Auto-generated CLI from standard YANG models comes
-with built-in help for every command — just hit <kbd>?</kbd> or
-<kbd>TAB</kbd> for context-aware assistance.
+- Runs from a squashfs image on a read-only partition
+- Single configuration file on a separate partition
+- Built around YANG with standard IETF models
+- Linux switchdev provides open switch APIs
+- Atomic upgrades to secondary partition
+- Highly security focused
 
-Familiar NETCONF & RESTCONF APIs and [comprehensive documentation][4]
-mean you're never stuck.  Whether you're learning networking or managing
-enterprise infrastructure.
+An immutable[^2] operating system enhances security and inherently makes
+it maintenance-free.  Configuration and data, e.g, containers, is stored
+on separate partitions to ensure complete separation from system files
+and allow for seamless backup, restore, and provisioning.
 
-**🛡️ Secure**  
-Built with security as a foundation, not an afterthought.  Minimal
-attack surface, separation between system and data, and container
-isolation.  Sleep better knowing your infrastructure is protected.
+In itself Infix is perfectly suited for dedicated networking tasks and
+native support for Docker containers provides a versatile platform that
+can easily be adapted to any customer need.  Be it legacy applications,
+network protocols, process monitoring, or edge data analysis, it can run
+close to end equipment.  Either directly connected on dedicated Ethernet
+ports or indirectly using virtual network cables to exist on the same
+LAN as other connected equipment.
 
-## Why Choose Infix
+The simple design of Infix provides complete control over both system
+and data, minimal cognitive burden, and makes it incredibly easy to get
+started.
 
-**Hardware Flexibility**: Start with a $35 Raspberry Pi, scale to
-enterprise switching hardware.  Same OS, same tools, same reliability.
+<details><summary><b>Example CLI Session</b></summary>
 
-**Standards-Based**: Built around YANG models and IETF standards. Learn
-once, use everywhere - no vendor lock-in.
+The CLI configure context is automatically generated from the loaded
+YANG models and their corresponding [sysrepo][2] plugins.  The following
+is brief example of how to set the IP address of an interface:
 
-**Container Ready**: Run your applications alongside networking
-functions.  GPIO access, dedicated Ethernet ports, custom protocols —
-your device, your rules.
-
-## Use Cases
-
-1. **Home Labs & Hobbyists**:  
-   Transform a Raspberry Pi into a full-featured router with WiFi  
-1. **IoT & Edge Computing**:  
-   Bridge devices to the cloud with reliable, updatable gateways  
-1. **Small Business Networks**:  
-   Enterprise-grade features without the complexity or cost  
-1. **Developers & Makers**:  
-   Test networking concepts, prototype IoT solutions, or build custom
-   appliances
-1. **Network Professionals**:  
-   Consistent tooling from development to production deployment.  
-   How about a digital twin using raw Qemu or [GNS3](https://gns3.com/infix)!
-
-## Quick Example
-
-Configure an interface in seconds - the CLI guides you with built-in help:
-
-<pre><code>admin@infix-12-34-56:/> <b>configure</b>
-admin@infix-12-34-56:/config/> <b>edit interface eth0</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4</b> <kbd>TAB</kbd>
-      address     autoconf      bind-ni-name     dhcp 
-      enabled     forwarding    mtu              neighbor
-admin@infix-12-34-56:/config/interface/eth0/> <b>set ipv4 address 192.168.2.200 prefix-length 24</b>
-admin@infix-12-34-56:/config/interface/eth0/> <b>show</b>
+```
+admin@infix-12-34-56:/> configure
+admin@infix-12-34-56:/config/> edit interface eth0
+admin@infix-12-34-56:/config/interface/eth0/> set ipv4 <TAB>
+      address     autoconf bind-ni-name      enabled
+	  forwarding  mtu      neighbor
+admin@infix-12-34-56:/config/interface/eth0/> set ipv4 address 192.168.2.200 prefix-length 24
+admin@infix-12-34-56:/config/interface/eth0/> show
 type ethernet;
 ipv4 {
   address 192.168.2.200 {
     prefix-length 24;
   }
 }
-admin@infix-12-34-56:/config/interface/eth0/> <b>diff</b>
+ipv6
+admin@infix-12-34-56:/config/interface/eth0/> diff
 interfaces {
   interface eth0 {
 +    ipv4 {
@@ -82,100 +70,54 @@ interfaces {
 +    }
   }
 }
-admin@infix-12-34-56:/config/interface/eth0/> <b>leave</b>
-admin@infix-12-34-56:/> <b>show interfaces</b>
-<u>INTERFACE       PROTOCOL   STATE       DATA                                  </u>
-lo              ethernet   UP          00:00:00:00:00:00
-                ipv4                   127.0.0.1/8 (static)
-                ipv6                   ::1/128 (static)
+admin@infix-12-34-56:/config/interface/eth0/> leave
+admin@infix-12-34-56:/> show interfaces
+INTERFACE       PROTOCOL   STATE       DATA
 eth0            ethernet   UP          52:54:00:12:34:56
                 ipv4                   192.168.2.200/24 (static)
                 ipv6                   fe80::5054:ff:fe12:3456/64 (link-layer)
-admin@infix-12-34-56:/> <b>copy running startup</b>
-</code></pre>
+lo              ethernet   UP          00:00:00:00:00:00
+                ipv4                   127.0.0.1/8 (static)
+                ipv6                   ::1/128 (static)
+admin@infix-12-34-56:/> copy running-config startup-config
+```
 
-Notice how <kbd>TAB</kbd> completion shows available options, `show`
-displays current config, and `diff` shows exactly what changed before
-you commit your changes with the `leave` command.
+[Click here][3] for more details.
+</details>
 
-For more information, see [CLI documentation][3].
+Infix can run on many different types of architectures and boards, much
+thanks to Linux and Buildroot.  Currently the focus is on 64-bit ARM
+devices, optionally with switching fabric supported by Linux switchdev.
+The [following boards](board/aarch64/README.md) are fully supported:
 
-## Get Started
+ - Marvell CN9130 CRB
+ - Marvell EspressoBIN
+ - Microchip SparX-5i PCB135 (eMMC)
+ - NanoPi R2S
 
-Get [pre-built images][5] for your hardware.  Use the CLI, web
-interface, or standard NETCONF/RESTCONF tools, e.g., `curl`.  Add
-containers for any custom functionality you need.
+An x86_64 build is also available, primarily intended for development
+and testing, but can also be used for evaluation and demo purposes.  For
+more information, see: [Infix in Virtual Environments](doc/virtual.md).
 
-### Supported Platforms
+> See the [GitHub Releases](https://github.com/kernelkit/infix/releases)
+> page for our pre-built images.  The *Latest Build* has the bleeding
+> edge images, if possible we recommend using a versioned release.
+>
+> For *customer specific builds* of Infix, see your product repository.
 
-- **Raspberry Pi 2B/3B/4B/CM4** - Perfect for home labs, learning, and prototyping
-- **Banana Pi-R3** - Your next home router and gateway
-- **NanoPi R2S** - Compact dual-port router in a tiny package
-- **x86_64** - Run in VMs or on mini PCs for development and testing
-- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM64 platforms
-- **Microchip SparX-5i** - Enterprise switching capabilities
-- **Microchip SAMA7G54-EK** - ARM Cortex-A7
-- **NXP i.MX8MP EVK** - Highly capable ARM64 SoC
-- **StarFive VisionFive2** - RISC-V architecture support
+[^1]: NETCONF or RESTCONF, <https://datatracker.ietf.org/doc/html/rfc8040>
 
-*Why start with Raspberry Pi?* It's affordable, widely available, has
-built-in WiFi + Ethernet, and runs the exact same Infix OS you'd deploy
-in production. Perfect for learning, prototyping, or even small-scale
-deployments.
+[^2]: An immutable operating system is one with read-only file systems,
+    atomic updates, rollbacks, declarative configuration, and workload
+    isolation.  All to improve reliability, scalability, and security.
+    For more information, see <https://ceur-ws.org/Vol-3386/paper9.pdf>
+    and <https://www.zdnet.com/article/what-is-immutable-linux-heres-why-youd-run-an-immutable-linux-distro/>.
 
-> 📖 **[Complete documentation][4]** • 💬 **[Join our Discord][discord-url]**
-
-## Technical Details
-
-<a href="https://bitsign.se">
-  <picture>
-    <source media="(prefers-color-scheme: dark)" srcset="https://bitsign.se/assets/badges/bitsign-badge-dark-mode.png">
-    <source media="(prefers-color-scheme: light)" srcset="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png">
-    <img alt="bitSign - Code Signing" src="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png" align="right" width=150 padding=10>
-  </picture>
-</a>
-
-Built on proven open-source foundations: [Linux][0], [Buildroot][1], and
-[sysrepo][2] — for reliability you can trust:
-
-- **Immutable OS**: Read-only filesystem, atomic updates, instant rollback
-- **YANG Configuration**: Industry-standard models with auto-generated tooling
-- **Hardware Acceleration**: Linux switchdev support for wire-speed packet processing
-- **Container Integration**: Docker support with flexible network and hardware access
-- **Memory Efficient**: Runs comfortably on devices with as little as 256 MB RAM
-- **Code Signing**: Releases are cryptographically signed for integrity verification
-
-Perfect for everything from resource-constrained edge devices to
-high-throughput network appliances.
-
-With the entire system modeled in YANG, scalability is no longer an
-issue, be it in development, testing, or end users deploying and
-monitoring their devices.  All knobs and dials are accessible from the
-CLI (console/SSH), or remotely using the native NETCONF or RESTCONF
-APIs.
-
-> Check the *[Latest Build][]* for bleeding-edge features.
-
----
-
-<div align="center">
-  <a href="https://github.com/wires-se"><img src="https://raw.githubusercontent.com/wires-se/.github/main/profile/play.svg" width=300></a>
-  <br />Infix development is sponsored by <a href="https://wires.se">Wires</a>
-</div>
-
-![Alt](https://repobeats.axiom.co/api/embed/5ce7a2a67edc923823afa0f60c327a6e8575b6e9.svg "Repobeats analytics image")
-
-[0]: https://www.kernel.org
-[1]: https://buildroot.org/ "Buildroot Homepage"
-[2]: https://www.sysrepo.org/ "Sysrepo Homepage"
-[3]: https://www.kernelkit.org/infix/latest/cli/introduction/
-[4]: https://www.kernelkit.org/infix/
-[5]: https://github.com/kernelkit/infix/releases/latest
-[Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest "Latest build"
+[1]: https://buildroot.org/
+[2]: https://www.sysrepo.org/
+[3]: doc/cli/introduction.md
 [License]:         https://en.wikipedia.org/wiki/GPL_license
 [License Badge]:   https://img.shields.io/badge/License-GPL%20v2-blue.svg
-[Release]:         https://github.com/kernelkit/infix/releases/latest
-[Release Badge]:   https://img.shields.io/github/v/release/kernelkit/infix 
 [GitHub]:          https://github.com/kernelkit/infix/actions/workflows/build.yml/
 [GitHub Status]:   https://github.com/kernelkit/infix/actions/workflows/build.yml/badge.svg
 [Coverity Scan]:   https://scan.coverity.com/projects/29393

board/Config.in

@@ -1,8 +0,0 @@
-menu "Board Support"
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/arm/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/riscv64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/x86_64/Config.in"
-
-endmenu

board/README.md

@@ -1,18 +0,0 @@
-Board Support
-=============
-
-The board support for an architecture always starts with Qemu support,
-this is what each `linux_defconfig` at the very least sets up.  Then
-each `$BR2_ARCH` has additional BSPs, e.g., Banana Pi BPI-R3.
-
-The `board/` directory is matched with the `configs/*_defconfigs` and
-the only execption is `board/common/`, which holds all shared files for
-Infix builds.
-
-Each `board/$BR2_ARCH/` can then have vendor/product sub-directories
-for the BSPs which may contain "fixups" to the base kernel config and
-any additional device tree files that should be included as well.
-
-To rebuild a board-specific package, e.g. NanoPi R2S:
-
-    make friendlyarm-nanopi-r2s-rebuild all

board/aarch64/Config.in

@@ -1,15 +0,0 @@
-if BR2_aarch64
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/alder-alder/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r3/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r4/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/freescale-imx8mp-evk/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/friendlyarm-nanopi-r2s/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-cn9130-crb/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-espressobin/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/microchip-sparx5-pcb135/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/raspberrypi-rpi64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/styx-dcp-sc-28p/Config.in"
-
-endif

board/aarch64/README.md

@@ -1,13 +1,67 @@
 aarch64
 =======
 
-Board Specific Documentation
-----------------------------
+Microchip SparX-5i PCB135 (eMMC)
+--------------------------------
 
-- [Banana Pi BPi-R3](bananapi-bpi-r3/)
-- [Banana Pi BPi-R4](bananapi-bpi-r4/)
-- [Banana Pi BPi-R64](bananapi-bpi-r64/)
-- [Marvell CN9130-CRB](marvell-cn9130-crb/)
-- [Microchip SparX-5i PCB135 (eMMC)](microchip-sparx5-pcb135/)
-- [NanoPi R2S](friendlyarm-nanopi-r2s/)
-- [Raspberry Pi 64-bit](raspberrypi-rpi64/)
+At present, only FIT images are supported via the SparX-5i eval
+board's U-Boot, which must contain a valid load address. If you are
+using this board, after selecting your base configuration, run the
+following command to supplement the existing config with the required
+FIT options:
+
+    make board-enable-sparx-fit
+
+### Unbricking
+
+1. Don't load a corrupt bootloader to begin with
+2. Done
+
+If, for some reason, you didn't manage to follow step 1, you can use
+the `FLASH_PROG`(`J4`) connector on the board to access the SPI flash
+directly.
+
+Using a [Bus Blaster][BB3] in combination with [dangerspi][dangerspi],
+you can load a new bootloader. The schematic below details how to
+connect the Bus Blaster to the board, but the concept should be
+portable to any debugger/device based around an FTDI2232 chip.
+
+```
+Bus Blaster:         FLASH_PROG (J4):
+       .---.              .---.
+   VTG >o o| VTG      SCK >o o| GND
+  TRST |o o| GND     MISO |o o| #RESET_FLASH
+   TDI |o o| GND           o o| 3V3
+   TMS |o o| GND      #CS |o o| #SYSRESET
+   TCK  o o| GND     MOSI |o o| GND
+  RTCK  o o| GND          '---'
+   TDO |o o| GND
+ TSRST |o o| GND
+ DBGRQ |o o| GND
+DBGACK |o o| GND
+       '---'
+```
+
+| Bus Blaster | FLASH_PROG     |
+|-------------|----------------|
+| `VTG`       | `3V3`          |
+| `GND`       | `GND`          |
+|             |                |
+| `VTG`       | `#RESET_FLASH` |
+| `GND`       | `#SYSRESET`    |
+|             |                |
+| `TDI`       | `MOSI`         |
+| `TMS`       | `#CS`          |
+| `TCK`       | `SCK`          |
+| `TDO`       | `MISO`         |
+
+With the cable in place, build U-Boot with the correct configuration:
+
+    make fireant_boot_defconfig && make
+
+To flash it to the board, connect the cable to `J4` and run:
+
+    make board-sparx-flash-uboot
+
+[BB3]: http://dangerousprototypes.com/docs/Bus_Blaster#Bus_Blaster_v3
+[dangerspi]: https://github.com/wkz/dangerspi

board/aarch64/alder-alder/Config.in

@@ -1,6 +0,0 @@
-config BR2_PACKAGE_ALDER_ALDER
-	bool "Alder"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_LINUX_FIRMWARE_INSIDE_SECURE_MINIFW
-	help
-	  Alder

board/aarch64/alder-alder/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2024 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/alder-alder/alder-alder.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  d2f96418893ac66156d0e691cda189b0d85ae1d814065d1d9aa1845383100f46  LICENSE

board/aarch64/alder-alder/alder-alder.mk

@@ -1,2 +0,0 @@
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/alder-alder/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += alder/alder.dtb

board/aarch64/alder-alder/dts/marvell/cn9130-patched.dtsi

@@ -1,12 +0,0 @@
-#include <arm64/marvell/cn9130.dtsi>
-
-&cp0_syscon0 {
-	cp0_pinctrl: pinctrl {
-		/* For some reason, this is missing from cn9130.dtsi */
-		compatible = "marvell,cp115-standalone-pinctrl";
-	};
-};
-
-&cp0_xmdio {
-	clock-names = "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-};

board/aarch64/bananapi-bpi-r3/Config.in

@@ -1,11 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R3
-	bool "Banana Pi R3"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7986
-	select BR2_PACKAGE_LINUX_FIRMWARE_AIROHA_EN8811H
-	select SDCARD_AUX
-	help
-	  Build Banana PI R3 support

board/aarch64/bananapi-bpi-r3/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/bananapi-bpi-r3/README.md

@@ -1,273 +0,0 @@
-# Banana Pi BPI-R3 / BPI-R3 Mini
-
-<img src="bananapi-bpi-r3.webp" alt="The board" width=800 padding=10>
-
-## Overview
-
-The Banana Pi BPI-R3 and BPI-R3 Mini are high-performance networking
-boards with full Infix support for all enabled features including
-Ethernet, WiFi, and SFP interfaces.
-
-Both boards share the same SoC and most peripherals.  The key
-differences are:
-
-| Feature         | BPI-R3             | BPI-R3 Mini             |
-|-----------------|--------------------|-------------------------|
-| Ethernet switch | Yes (4x LAN + WAN) | No (WAN/LAN ports only) |
-| SD card slot    | Yes                | No                      |
-
-### Hardware Features
-
-- MediaTek MT7986 ARM Cortex-A53 quad-core processor @ 2.0 GHz
-- 2 GB DDR4 RAM
-- 8 GB eMMC storage
-- microSD card slot (BPI-R3 only)
-- 5x Gigabit Ethernet ports with switch core (BPI-R3 only)
-- 2x SFP cages for fiber connectivity (1G/2.5G) (BPI-R3 only)
-- Dual-band WiFi (2.4 GHz + 5 GHz)
-- USB 3.0 port
-- Mini PCIe slot
-
-### Default Network Configuration
-
-Infix comes preconfigured with:
-
-- **LAN ports** (lan1-lan4): Bridged for internal networking (BPI-R3 only)
-- **WAN port**: DHCP client enabled for internet connectivity
-- **SFP ports** (sfp1, sfp2): Available for configuration (BPI-R3 only)
-- **WiFi interfaces** (wifi0, wifi1): Available for configuration
-
-## Getting Started
-
-### BPI-R3: Quick Start with SD Card
-
-The easiest way to get started with the BPI-R3 is using an SD card:
-
-> [!NOTE]
-> SD card boot works but we have observed stability issues. For production
-> use or long-term reliability, we recommend installing to eMMC (see below).
-
-1. **Download the SD card image:** [infix-bpi-r3-sdcard.img][2]
-2. **Flash the image to an SD card:** see [this guide][0]
-3. **Set boot switches:**
-   - Set DIP switches to **0000** (SD card boot mode)
-   - Switch positions are on the underside of the board near the SD slot
-4. **Boot the board:**
-   - Insert the SD card
-   - Connect power
-   - Connect to LAN port or console (115200 8N1)
-   - Default login: `admin` / `admin`
-
-### BPI-R3 Mini: Getting Started
-
-The BPI-R3 Mini does not have an SD card slot, so you must install
-directly to eMMC.  See [Installing to eMMC — BPI-R3
-Mini](#bpi-r3-mini) below.
-
-### Boot Switch Reference
-
-The BPI-R3 has a 4-position DIP switch that controls boot media:
-
-<img align="right" src="bootstrap-switch.webp" alt="DIP switches" width=200 padding=10>
-
-| Position | Mode        | Description                           |
-|----------|-------------|---------------------------------------|
-| 0000     | SD card     | Boot from microSD card                |
-| 0110     | eMMC        | Boot from internal eMMC (recommended) |
-| 1010     | SPI NAND    | Boot from SPI NAND (advanced users)   |
-
-> [!NOTE]
-> Switch position is read from left to right: "0" = OFF, "1" = ON.
-> When the DIP switch is in the "UP" position it is OFF(0).
-
-## Installing to eMMC
-
-For production deployments or better performance, you can install Infix
-to the internal eMMC storage.
-
-> [!IMPORTANT]
-> While Infix boots on both SD card and eMMC on the BPI-R3, we have
-> observed stability issues with SD cards on this platform. **eMMC is
-> recommended** for reliable operation.
-
-### Prerequisites
-
-- FTDI USB-to-serial cable (3.3V) for console access
-- USB flash drive (FAT32 formatted)
-- microSD card with Infix, for initial boot (BPI-R3 only)
-- Downloaded files (see below)
-
-### Required Files
-
-Download and place these files on a FAT32-formatted USB drive:
-
-1. **Infix eMMC image:**
-   - [infix-bpi-r3-emmc.img][3] (Complete system image)
-2. **eMMC bootloader** (extracted from):
-   - [bpi-r3-emmc-boot-2025.01-latest.tar.gz][4]
-   - Extract `bl2.img` from the tarball to your USB drive
-3. **Intermediate NAND bootloader** (BPI-R3 only, from Frank-W's U-Boot):
-   - [bpi-r3_spim-nand_bl2.img][5] (BL2 loader)
-   - [bpi-r3_spim-nand_fip.bin][6] (FIP image)
-
-> [!WARNING]
-> The following process involves multiple boot mode changes.  Take your
-> time and verify each step carefully.
-
-### BPI-R3
-
-#### Step 1: Boot from SD card
-
-1. Set boot switches to **0000** (SD card mode)
-2. Insert SD card with Infix
-3. Power on and break into U-Boot (press Ctrl-C during boot)
-
-#### Step 2: Flash intermediate NAND bootloader
-
-This step installs a temporary bootloader to NAND that will help us
-flash the eMMC. From the U-Boot prompt:
-
-```
-usb start
-mtd erase spi-nand0
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_bl2.img
-mtd write spi-nand0 0x50000000 0x0 0x100000
-fatload usb 0:1 0x50000000 bpi-r3_spim-nand_fip.bin
-mtd write spi-nand0 0x50000000 0x380000 0x200000
-```
-
-#### Step 3: Boot from NAND
-
-1. Power off the board
-2. Set boot switches to **1010** (NAND mode)
-3. Power on - you should boot into U-Boot again
-
-#### Step 4: Write Infix image to eMMC
-
-From the U-Boot prompt:
-
-```
-usb start
-fatload usb 0:1 0x50000000 infix-bpi-r3-emmc.img
-setexpr blocks ${filesize} / 0x200
-mmc write 0x50000000 0x0 ${blocks}
-```
-
-This writes the complete Infix system (partitions, rootfs, etc.) to eMMC.
-
-#### Step 5: Configure eMMC boot
-
-Now configure the eMMC boot partition and write the bootloader:
-
-```
-mmc partconf 0 1 1 1
-mmc erase 0x0 0x400
-fatload usb 0:1 0x50000000 bl2.img
-mmc write 0x50000000 0x0 0x400
-mmc partconf 0 1 1 0
-```
-
-#### Step 6: Boot from eMMC
-
-1. Power off the board
-2. Set boot switches to **0110** (eMMC mode)
-3. Remove SD card (optional, but recommended to verify eMMC boot)
-4. Power on
-
-Your BPI-R3 should now boot Infix from internal eMMC storage!
-
-### BPI-R3 Mini
-
-The BPI-R3 Mini does not have an SD card slot, so you have to go
-through the factory-installed Linux (OpenWRT) to flash the Infix
-bootloader and OS to eMMC.
-
-#### Step 1: Boot from NAND (factory default)
-
-<img src="r3mini_nandboot2.png" alt="BPI-R3 Mini NAND boot switch position" width=400>
-
-1. Ensure boot switches are set to NAND mode (factory default)
-2. Place `infix-bpi-r3-emmc.img` and `bl2.img` on a USB drive
-3. Power on and boot into Linux
-4. Mount the USB drive to `/mnt`
-
-#### Step 2: Flash Infix to eMMC
-
-From the Linux shell:
-
-```
-echo 0 > /proc/sys/kernel/printk
-dd if=/mnt/infix-bpi-r3-emmc.img of=/dev/mmcblk0
-echo 0 > /sys/block/mmcblk0boot0/force_ro
-dd if=/mnt/bl2.img of=/dev/mmcblk0boot0
-sync
-```
-
-#### Step 3: Boot from eMMC
-
-<img src="r3mini_emmcboot.png" alt="BPI-R3 Mini eMMC boot switch position" width=400>
-
-1. Power off the board
-2. Set boot switches to eMMC mode (see image above)
-3. Power on
-
-## Troubleshooting
-
-### Board won't boot
-
-- Verify boot switch positions (check twice!)
-- Ensure power supply provides adequate current (12V/2A recommended)
-- Try booting from SD card with switches at **0000** (BPI-R3 only)
-
-### Can't break into U-Boot
-
-- Ensure serial console is connected properly (115200 8N1, 3.3V)
-- Press Ctrl-C immediately when you see boot messages
-- Try power cycling and pressing Ctrl-C repeatedly
-
-### eMMC boot fails after installation
-
-- Boot from NAND (**1010**) and verify eMMC image was written
-- Check USB drive contents - ensure all files are present
-- Re-run the eMMC boot configuration step
-
-### Reverting to SD card (BPI-R3 only)
-
-Simply set boot switches back to **0000** and boot from SD card. The
-eMMC installation does not affect SD card functionality.
-
-## Additional Resources
-
-- [Infix Documentation][1]
-- [Official BPI-R3 Wiki][7]
-- [Release Downloads][8]
-
-## Building Custom Images
-
-See the main Infix documentation for building from source. To build both
-SD card and eMMC images locally:
-
-```bash
-# Build bootloaders for both SD and eMMC
-make x-bpi-r3-sd-boot
-make x-bpi-r3-emmc-boot
-
-# Build main system
-make aarch64
-
-# Create SD card image
-./utils/mkimage.sh -od bananapi-bpi-r3
-
-# Create eMMC image
-./utils/mkimage.sh -odt emmc bananapi-bpi-r3
-```
-
-[0]: https://www.kernelkit.org/posts/flashing-sdcard/
-[1]: https://www.kernelkit.org/infix/latest/
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-sdcard.img
-[3]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-emmc.img
-[4]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r3-emmc-boot-2025.01-latest.tar.gz
-[5]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_bl2.img
-[6]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2025-10-bpi-2025.10-2025-10-13_1032/bpi-r3_spim-nand_fip.bin
-[7]: https://wiki.banana-pi.org/Banana_Pi_BPI-R3
-[8]: https://github.com/kernelkit/infix/releases/tag/latest-boot

board/aarch64/bananapi-bpi-r3/bananapi-bpi-r3.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  dbe4eae8debbba8135297e15f24aeefef0b4c03781f3f9328db4398d58a728b3  LICENSE

board/aarch64/bananapi-bpi-r3/bananapi-bpi-r3.mk

@@ -1,37 +0,0 @@
-define BANANAPI_BPI_R3_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-	$(call KCONFIG_SET_OPT,CONFIG_AIR_EN8811H_PHY,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_HSDMA)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MT798X_WMAC)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_SOC_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_MT6380,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/bananapi-bpi-r3/dts/Makefile

@@ -1 +0,0 @@
-dtb-y += mediatek/mt7986a-bananapi-bpi-r3-sd.dtb mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb mediatek/mt7986a-bananapi-bpi-r3-mini.dtb

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtsi

@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-        bus-width = <8>;
-        max-frequency = <200000000>;
-        cap-mmc-highspeed;
-        mmc-hs200-1_8v;
-        mmc-hs400-1_8v;
-        hs400-ds-delay = <0x14014>;
-        non-removable;
-        no-sd;
-        no-sdio;
-        status = "okay";
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts

@@ -1,12 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3-mini.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"
-
-&phy0 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-&phy1 {
-	compatible = "ethernet-phy-id03a2.a411";
-};
-

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dtsi

@@ -1,2 +0,0 @@
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-emmc.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dts

@@ -1,4 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-sd.dtsi"

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtsi

@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-	bus-width = <4>;
-	max-frequency = <52000000>;
-	cap-sd-highspeed;
-	status = "okay";
-};

board/aarch64/bananapi-bpi-r3/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi

@@ -1,72 +0,0 @@
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb>;
-			usb-port-names = "USB";
-		};
-	};
-};
-/*
-From 236317dd4e55512933dcdaec3d0b4a0824f5e5bd Mon Sep 17 00:00:00 2001
-From: Shiji Yang <yangshiji66@outlook.com>
-Date: Sun, 10 Aug 2025 18:11:01 +0800
-Subject: [PATCH] arm64: dts: mediatek: mt7986: increase ATF reserved memory to
- 256 kiB
-
-The latest Mediatek open-source Trusted Firmware-A project has
-reserved 256 KiB for BL2 and BL31. It is better to increase the
-reserved memory region in the Linux kernel to protect the data.
-
-https://github.com/openwrt/openwrt/blob/main/target/linux/mediatek/patches-6.12/199-arm64-dts-mediatek-mt7986-increase-ATF-reserved-memo.patch
-*/
-&secmon_reserved {
-	reg = <0 0x43000000 0 0x40000>;
-};
-&cpu_thermal {
-	/delete-node/ trips;
-	/delete-node/ cooling-maps;
-	trips {
-		cpu_trip_active_cool: cpu-trip-active-cool {
-			temperature = <40000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_low: cpu-trip-active-low {
-			temperature = <45000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_med: cpu-trip-active-med {
-			temperature = <60000>;   // 60°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_hot: cpu-trip-hot {
-			temperature = <80000>;   // 80°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "hot";
-		};
-		cpu_trip_critical: cpu-trip-critical {
-			temperature = <90000>;   // 90°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map-cpu-40deg {
-			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_active_cool>;
-		};
-		map-cpu-45deg {
-			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
-		};
-		map-cpu-60deg {
-			cooling-device = <&fan 2 2>;
-			trip = <&cpu_trip_active_med>;
-		};
-	};
-};

board/aarch64/bananapi-bpi-r3/genimage.cfg.in

@@ -1,87 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r3-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-#		partition-type = 0x83  # Linux filesystem
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-	partition en8811h_fw {
-		size = 10M
-		image = "en8811h-fw.bin"
-	}
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/factory-config.cfg

@@ -1,480 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "2.4GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio1",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan4",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "sfp1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "sfp2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/product/interface-quirks.json

@@ -1,11 +0,0 @@
-{
-    "sfp1": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    },
-    "sfp2": {
-	"comment": "Reports it supports autoneg, but if setting it, dagger crashes",
-	"broken-autoneg": true
-    }
-
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3/etc/udev/rules.d/90-bpi-r3-rename-eth1.rules

@@ -1 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp1"

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/factory-config.cfg

@@ -1,446 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "name": "radio0",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "2.4GHz",
-          "channel": "auto"
-        }
-      },
-      {
-        "name": "radio1",
-        "class": "infix-hardware:wifi",
-        "infix-hardware:wifi-radio": {
-          "country-code": "DE",
-          "band": "5GHz",
-          "channel": "auto"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R3"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio0",
-          "access-point": {
-            "ssid": "Infix",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "wifi1-ap",
-        "type": "infix-if-type:wifi",
-        "infix-interfaces:wifi": {
-          "radio": "radio1",
-          "access-point": {
-            "ssid": "Infix5Ghz",
-            "security": {
-              "secret": "wifi"
-            }
-          }
-        },
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    },
-    "symmetric-keys": {
-      "symmetric-key": [
-        {
-          "name": "wifi",
-          "cleartext-symmetric-key": "aW5maXhpbmZpeA==",
-          "key-format": "infix-crypto-types:passphrase-key-format"
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r3/rootfs/usr/share/product/bananapi,bpi-r3mini/etc/udev/rules.d/90-bpi-r3-mini-rename-ethernet.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth0", NAME="lan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="wan"

board/aarch64/bananapi-bpi-r3/uboot/emmc-extras.config

@@ -1,3 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-emmc-env.dtsi"
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_DEVICE=emmc DRAM_USE_DDR4=1 USE_MKIMAGE=1  MKIMAGE=$(HOST_DIR)/bin/mkimage"
-CONFIG_SUPPORT_EMMC_BOOT=y

board/aarch64/bananapi-bpi-r3/uboot/extras.config

@@ -1,45 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_OF_LIST="mt7986a-bpi-r3-sd mt7986a-bpi-r3-emmc mt7986a-bpi-r3-mini"
-
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
-
-CONFIG_MTK_SPIM=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTK_SPIM=y
-CONFIG_MTK_SNOR=y
-
-CONFIG_DM_MDIO=y
-CONFIG_DM_ETH_PHY=y
-CONFIG_PHY_ETHERNET_ID=y
-
-CONFIG_PHY_AIROHA=y
-CONFIG_PHY_AIROHA_EN8811H=y
-CONFIG_PHY_AIROHA_FW_IN_MMC=y
-
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_MDIO=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DM=y

board/aarch64/bananapi-bpi-r3/uboot/mt7986-emmc-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-emmc.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-env.dtsi

@@ -1,29 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       /* After the MMC driver has enabled bus power,
-                        * the controller seems to sometimes detect a
-                        * card removal state , which causes it to
-                        * disable power again. This hack re-enables the
-                        * bus power in those cases.
-                        */
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-		en8811h_fw_part = "0#en8811h_fw";
-		en8811h_fw_dm_dir = "EthMD32.dm.bin";
-		en8811h_fw_dsp_dir = "EthMD32.DSP.bin";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-                       ixbtn-factory = "echo \"No button available, use bootmenu\"";
-               };
-       };
-};

board/aarch64/bananapi-bpi-r3/uboot/mt7986-sd-env.dtsi

@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-sd.dtb";
-};

board/aarch64/bananapi-bpi-r3/uboot/sd-extras.config

@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-sd-env.dtsi"

board/aarch64/bananapi-bpi-r4/Config.in

@@ -1,11 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R4
-	bool "Banana Pi R4"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7988
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7996
-	select SDCARD_AUX
-	help
-	  Build Banana PI R4 support

board/aarch64/bananapi-bpi-r4/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2026 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

board/aarch64/bananapi-bpi-r4/README.md

@@ -1,360 +0,0 @@
-# Banana Pi BPI-R4 / BPI-R4-2g5 / BPI-R4P
-
-<img src="banana_pi_bpi-r4_poe.jpg" alt="The board" width=800 padding=10>
-
-## Overview
-
-The Banana Pi BPI-R4 is a high-performance networking board built around the
-MediaTek MT7988A SoC (Filogic 880).  It is a successor to the BPI-R3 and
-represents a significant step up: the CPU switches from in-order Cortex-A53
-cores to out-of-order Cortex-A73 cores, and the MT7531 switch is now part of
-the SOC. The base model comes with two SFP+ cages supporting 1.25/2.5/5/10
-Gbps, and the R4P model comes with one SFP+ cage and one 2.5 Gbps RJ45 jack,
-which with an optional PoE board means the board can act as PD.  Unlike the
-BPi-R3, however, there is no on-board WiFi support, that requires an external
-tri-band WiFi 7 (IEEE 802.11be) card.
-
-### Variants
-
-| **Feature**      | **BPI-R4**       | **BPI-R4-2g5**    | **BPI-R4P**               |
-|------------------|------------------|-------------------|---------------------------|
-| 1G switch ports  | wan, lan1–lan3   | lan0–lan3         | lan0–lan3                 |
-| 2.5G RJ45 (WAN)  | —                | wan               | wan (PoE input)           |
-| SFP+ port(s)     | sfp1, sfp2 (10G) | sfp1 (10G)        | sfp1 (10G)                |
-| Linux DT         | bpi-r4           | bpi-r4-2g5        | bpi-r4-2g5 (same)         |
-
-On the standard BPI-R4 the four 1G switch ports are labeled `wan`, `lan1`, `lan2`,
-and `lan3`.  On the R4-2g5 and R4P, the port that would otherwise be `wan` on the
-switch is relabeled `lan0` via a device tree overlay, since the actual WAN port on
-those variants is the dedicated 2.5G internal PHY on the separate RJ45 jack.
-
-The BPI-R4P is mechanically and electrically identical to the BPI-R4-2g5
-with an additional PoE daughterboard header.  From a Linux kernel and
-Infix perspective the two boards are treated identically.
-
-### SoC: MediaTek MT7988A vs MT7986 (BPI-R3)
-
-The MT7988A (Filogic 880) and MT7986 (Filogic 820) may look similar from
-their part numbers, but they are built on entirely different silicon with
-distinct system architectures:
-
-| **Aspect**       | **MT7988A (BPI-R4)**     | **MT7986 (BPI-R3)**       |
-|------------------|--------------------------|---------------------------|
-| CPU cores        | 4x Cortex-A73 @ 1.8 GHz  | 4x Cortex-A53 @ 2.0 GHz   |
-| CPU architecture | ARMv8-A, out-of-order    | ARMv8-A, in-order         |
-| Internal switch  | 1 Gbps per port          | 1 Gbps per port           |
-| Uplinks          | USXGMII (native 10 Gbps) | USXGMII (native 2.5 Gbps) |
-| WiFi             | MT7996E PCIe module      | MT7915E (built-in)        |
-| WiFi standard    | WiFi 7 (802.11be)        | WiFi 6 (802.11ax)         |
-| WiFi bands       | 2.4 / 5 / 6 GHz          | 2.4 / 5 GHz               |
-| Hardware crypto  | EIP-197 NPU              | EIP-93                    |
-| PCIe slots       | 4 (2x mPCIe, 2x M.2)     | 1 mPCIe                   |
-| Boot ROM offset  | Sector 1024 (0x80000)    | Sector 1024 (0x80000)     |
-
-### Hardware Features
-
-- **SoC:** MediaTek MT7988A (Filogic 880)
-- **CPU:** Quad-core ARM Cortex-A73, up to 1.8 GHz
-- **RAM:** 4 GB DDR4
-- **Storage:** 8 GB eMMC, microSD card slot, SPI NAND flash
-- **Ethernet switch:** 4-port 1 GbE (10/100/1000) internal DSA switch
-- **SFP+ ports:** 2x 10 Gbps USXGMII (standard R4) or 1x SFP+ (R4-2g5/R4P)
-- **WiFi:** optional MediaTek MT7996E PCIe module — tri-band WiFi 7 (2.4/5/6 GHz)
-- **USB:** 1x USB 3.0 (xHCI)
-- **PCIe:** 2x mPCIe (SIM2/SIM3), 1x M.2 Key-B (SIM1), 1x M.2 Key-M (SSD)
-- **RTC:** PCF8563 on I2C
-- **Fan:** PWM-controlled cooling with thermal management
-- **Console:** UART at 115200 8N1 (3.3 V, USB-to-serial adapter required)
-
-### Default Network Configuration
-
-Infix ships with the following factory defaults.
-
-**Standard BPI-R4:**
-
-- **LAN bridge** (`br0`, 192.168.0.1/24): `lan1`, `lan2`, `lan3` (1G switch ports)
-- **WAN port** (`wan`): DHCP client, used for internet uplink (1G switch port)
-- **SFP+ ports** (`sfp1`, `sfp2`): Present but unconfigured
-
-**BPI-R4-2g5 and BPI-R4P:**
-
-- **LAN bridge** (`br0`, 192.168.0.1/24): `lan0`, `lan1`, `lan2`, `lan3` (1G switch ports)
-- **WAN port** (`wan`): DHCP client, used for internet uplink (2.5G internal PHY)
-- **SFP+ port** (`sfp1`): Present but unconfigured
-
-> [!NOTE]
-> If an optional WiFi 7 (MT7996E) PCIe card is installed, the radio interfaces
-> are bridged into the LAN as access points.  WiFi is not included with the board
-> and is not part of the factory default configuration.
-
-
-## Getting Started
-
-<img align="right" src="console-header.png" alt="Console header pins" width=200 padding=10>
-
-### Quick Start with SD Card
-
-1. **Download the SD card image:** [infix-bpi-r4-sdcard.img][2]
-2. **Flash the image to an SD card:** see [this guide][0]
-3. **Set boot switches to SD card mode** (see Boot Switch Reference below)
-4. **Insert the SD card, connect power and a serial console (115200 8N1)**
-5. Default login: `admin` / `admin`
-
-### Boot Switch Reference
-
-<img align="right" src="bootstrap-sw3.png" alt="DIP switches" width=140 padding=10>
-
-The BPI-R4 has a 2-position DIP switch (SW3) that selects the boot media.
-Switch positions are printed on the board near the SD card slot.
-
-| A   | B   | Boot media (SW3) |
-|-----|-----|------------------|
-| OFF | ON  | SPI NAND         |
-| ON  | OFF | eMMC             |
-| ON  | ON  | SD card          |
-
-> [!NOTE]
-> "OFF" = switch in the UP position = logical 0.
-
-## Installing to eMMC
-
-For production use or better reliability, install Infix to the internal
-eMMC storage.
-
-> [!IMPORTANT]
-> The MT7988A has a single MMC controller that can only operate in one mode
-> (SD or eMMC) per boot session.  The SD card U-Boot cannot switch to eMMC
-> mode mid-session, so an intermediate NAND bootloader step is required to
-> write the eMMC — the same approach as BPi-R3.
->
-> The MT7988A boot chain is: **BROM → BL2 → FIP (BL31 + U-Boot)**.  The FIP
-> (Firmware Image Package) bundles ARM Trusted Firmware (BL31) and U-Boot
-> together; it is not just a U-Boot binary.  When BL2 runs, it loads the FIP
-> from a fixed offset and hands off to BL31, which then jumps into U-Boot.
->
-> The factory SPI NAND contains a minimal recovery U-Boot that only supports
-> TFTP — it has no USB command.  You cannot use it to load files from a USB
-> drive.  Similarly, the factory eMMC ships with a basic OpenWRT image.
-> You must first flash a full-featured U-Boot (from Frank-W) to SPI NAND via
-> the SD card U-Boot before you can write the eMMC.
->
-> This process involves three boot mode changes and multiple flash operations.
-> Take your time and verify each step carefully.
-
-### Prerequisites
-
-- USB-to-serial adapter (3.3 V) for console access
-- USB flash drive (FAT32 formatted)
-- microSD card with Infix SD image, for initial boot
-- Downloaded files (see below)
-
-### Required Files
-
-Place these files on a FAT32-formatted USB drive:
-
-1. **Infix eMMC image:** [infix-bpi-r4-emmc.img][3]
-2. **eMMC bootloader** (from): [bpi-r4-emmc-boot-2026.01-latest.tar.gz][4]
-   - Extract `bl2.img` from the tarball to your USB drive
-3. **Intermediate NAND bootloader** from Frank-W's U-Boot (for BPI-R4, SPI NAND):
-   - [bpi-r4_spim-nand_bl2.img][13] — BL2 first-stage loader
-   - [bpi-r4_spim-nand_fip.bin][14] — FIP image (BL31 + U-Boot)
-
-### Step 1: Boot from SD card
-
-1. Set boot switches to **SD card mode** (SW3: A=ON, B=ON)
-2. Insert the SD card with the Infix image
-3. Power on and break into U-Boot (press Ctrl-C during countdown)
-
-### Step 2: Flash intermediate NAND bootloader
-
-This installs a full-featured U-Boot to SPI NAND so the board can load files
-from USB in the next step.  From the SD card U-Boot prompt:
-
-```
-usb start
-mtd erase spi-nand0
-fatload usb 0:1 0x50000000 bpi-r4_spim-nand_bl2.img
-mtd write spi-nand0 0x50000000 0x0 0x100000
-fatload usb 0:1 0x50000000 bpi-r4_spim-nand_fip.bin
-mtd write spi-nand0 0x50000000 0x580000 0x200000
-```
-
-### Step 3: Boot from NAND
-
-1. Power off the board
-2. Set boot switches to **SPI NAND mode** (SW3: A=OFF, B=ON)
-3. Power on — you should boot into U-Boot again
-
-### Step 4: Write Infix image to eMMC
-
-From the U-Boot prompt:
-
-```
-usb start
-fatload usb 0:1 0x50000000 infix-bpi-r4-emmc.img
-setexpr blocks ${filesize} / 0x200
-mmc write 0x50000000 0x0 ${blocks}
-```
-
-### Step 5: Configure eMMC boot partition
-
-Write the BL2 bootloader to the eMMC boot partition:
-
-```
-mmc partconf 0 1 1 1
-mmc erase 0x0 0x400
-fatload usb 0:1 0x50000000 bl2.img
-mmc write 0x50000000 0x0 0x400
-mmc partconf 0 1 1 0
-```
-
-### Step 6: Boot from eMMC
-
-1. Power off the board
-2. Set boot switches to **eMMC mode** (SW3: A=ON, B=OFF)
-3. Remove the SD card (optional, recommended to verify eMMC boot)
-4. Power on
-
-Your BPI-R4 should now boot Infix from internal eMMC storage.
-
-## Troubleshooting
-
-### Board won't boot
-
-- Verify boot switch positions — double-check against the wiki
-- Ensure the power supply provides adequate current (12 V / 3 A recommended)
-- Check the serial console output at 115200 8N1
-
-### Can't break into U-Boot
-
-- Connect the serial console before powering on
-- Press Ctrl-C immediately when boot messages appear
-- Try power cycling and pressing Ctrl-C repeatedly during the countdown
-
-### eMMC boot fails after installation
-
-- Boot from NAND (SW3=ON) and verify the eMMC write completed without errors
-- Re-run the `mmc partconf` sequence — a missed step is the most common
-  cause of failure
-- Use `mmc info` to confirm the eMMC is detected
-
-### No network connectivity
-
-The interface names on BPI-R4 differ from BPI-R3.  Confirm what Linux
-has created with `ip link` and compare with the factory configuration:
-
-- `wan`, `lan1`–`lan3`: 1G switch ports (standard R4)
-- `wan`, `lan0`–`lan3`: on R4-2g5/R4P, `wan` is the 2.5G internal PHY; `lan0`–`lan3` are 1G switch ports
-- `sfp1` (and `sfp2` on standard R4): 10G SFP+ cage(s)
-
-If interface renames look wrong, check `dmesg | grep renamed` and if
-you spot any errors, please report as an issue to the Infix tracker
-on GitHub.
-
-## Board Variants
-
-### BPI-R4
-
-The base model BPi-R4 ports look like this, the `wan` port is the same physical
-switch port as `lan0` on the R4-2g5/R4P, but here it serves as the WAN port in
-the factory default configuration.
-
-```
-.-.
-| |                      .-----.-----.-----.-----.
-| |   _______   _______  |     |     |     |     | .---.
-| |  |       | |       | |     |     |     |     | |   | .-----.
-'-'  '-------' '-------' '-----'-----'-----'-----' '---' '-----'
-USB1    sfp1      sfp2     wan  lan1  lan2  lan3   DC12V  PD20V
-```
-
-### BPI-R4-2g5 and BPI-R4P
-
-These variants substitute one SFP+ cage for an internal 2.5 Gbps PHY
-connected to a standard RJ45 jack.  From a kernel perspective they use
-the `mt7988a-bananapi-bpi-r4-2g5` device tree.
-
-The BPI-R4P additionally supports an optional PoE input daughterboard on
-the 2.5 Gbps RJ45 port.  The PoE circuitry is passive with respect to
-Linux — no special kernel driver is required for basic operation.
-
-For these board variants, the WAN role moves to the dedicated 2.5G internal PHY,
-so all four switch ports become LAN ports (`lan0`–`lan3`) instead of three:
-
-```
-.-.
-| |            .-----.   .-----.-----.-----.-----.
-| |   _______  |     |   |     |     |     |     | .---.
-| |  |       | |     |   |     |     |     |     | |   | .-----.
-'-'  '-------' '-----'   '-----'-----'-----'-----' '---' '-----'
-USB1    sfp1     wan      lan0  lan1  lan2  lan3   DC12V  PD20V
-```
-
-### Selecting the Board Variant
-
-U-Boot cannot automatically distinguish the standard R4 from the R4-2g5/R4P at
-boot time (the on-board EEPROM is not programmed from factory).  Instead, the
-variant is read from the persistent U-Boot environment on the `aux` partition,
-and you have to set it manually using `fw_setenv` from a UNIX shell:
-
-```bash
-# For BPI-R4-2g5 or BPI-R4P (1x SFP+ + 1x 2.5 Gbps RJ45):
-sudo fw_setenv BOARD_VARIANT 2g5
-
-# To revert to the standard BPI-R4 (2x SFP+) clear the setting:
-sudo fw_setenv BOARD_VARIANT
-```
-
-> [!IMPORTANT]
-> The change takes effect on the next reboot.  No re-flashing is required, but
-> you may want to do a factory reset to activate the changes in your system
-> `startup-config`: `sudo factory -y` from shell, or the CLI.
-
-`fw_setenv` writes to the `uboot.env` file on the aux partition.  U-Boot
-reads this at every boot (before loading the kernel) and selects the
-matching device tree:
-
-| `BOARD_VARIANT` | Device tree loaded                |
-|-----------------|-----------------------------------|
-| *(unset)*       | `mt7988a-bananapi-bpi-r4.dtb`     |
-| `2g5`           | `mt7988a-bananapi-bpi-r4-2g5.dtb` |
-
-## Additional Resources
-
-- [Infix Documentation][1]
-- [Official BPI-R4 Page][7]
-- [BPI-R4 Forum][8]
-- [Frank-W's site][9]
-- [Release Downloads][10]
-- [Bootloader Builds][11]
-
-## Building Custom Images
-
-```bash
-# Build bootloaders for SD and eMMC
-make x-bpi-r4-sd-boot
-make x-bpi-r4-emmc-boot
-
-# Build main system
-make aarch64
-
-# Create SD card image
-./utils/mkimage.sh -od bananapi-bpi-r4
-
-# Create eMMC image
-./utils/mkimage.sh -odt emmc bananapi-bpi-r4
-```
-
-[0]: https://www.kernelkit.org/posts/flashing-sdcard/
-[1]: https://www.kernelkit.org/infix/latest/
-[2]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r4-sdcard.img
-[3]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r4-emmc.img
-[4]: https://github.com/kernelkit/infix/releases/download/latest-boot/bpi-r4-emmc-boot-2026.01-latest.tar.gz
-[7]: https://docs.banana-pi.org/en/BPI-R4/BananaPi_BPI-R4
-[8]: https://forum.banana-pi.org/
-[9]: https://wiki.fw-web.de/doku.php?id=en:bpi-r4:start
-[10]: https://github.com/kernelkit/infix/releases/tag/latest
-[11]: https://github.com/kernelkit/infix/releases/tag/latest-boot
-[12]: https://github.com/frank-w/u-boot/releases
-[13]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2026-01-bpi-2026.01-2026-01-15_2013/bpi-r4_spim-nand_bl2.img
-[14]: https://github.com/frank-w/u-boot/releases/download/CI-BUILD-2026-01-bpi-2026.01-2026-01-15_2013/bpi-r4_spim-nand_fip.bin

board/aarch64/bananapi-bpi-r4/bananapi-bpi-r4.hash

@@ -1,2 +0,0 @@
-# Locally calculated
-sha256  d48246c717b505cc11df95171f2fd548b389e1a463f1af4c68d0b69fe0d1009b  LICENSE

board/aarch64/bananapi-bpi-r4/bananapi-bpi-r4.mk

@@ -1,49 +0,0 @@
-define BANANAPI_BPI_R4_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7988)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7988)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_LVTS_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_SOC_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7996E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XFI_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCS_STANDALONE,y)
-	$(call KCONFIG_SET_OPT,CONFIG_PCS_MTK_USXGMII,y)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MEDIATEK_2P5GE_PHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-LINUX_DTS_MT7988 = $(LINUX_DIR)/arch/arm64/boot/dts/mediatek
-
-define BANANAPI_BPI_R4_KERNEL_DTBS_INSTALL_TARGET
-	@$(call MESSAGE,"Installing kernel DTBs and DTBOs for BPI-R4")
-	$(foreach f, \
-		mt7988a-bananapi-bpi-r4.dtb \
-		mt7988a-bananapi-bpi-r4-2g5.dtb \
-		mt7988a-bananapi-bpi-r4-sd.dtbo \
-		mt7988a-bananapi-bpi-r4-emmc.dtbo, \
-		$(INSTALL) -D $(LINUX_DTS_MT7988)/$(f) \
-			$(TARGET_DIR)/boot/mediatek/$(f)$(sep))
-endef
-BANANAPI_BPI_R4_POST_INSTALL_TARGET_HOOKS += BANANAPI_BPI_R4_KERNEL_DTBS_INSTALL_TARGET
-
-$(eval $(ix-board))
-$(eval $(generic-package))

board/aarch64/bananapi-bpi-r4/dts/Makefile

@@ -1,2 +0,0 @@
-dtb-y += infix/bananapi,bpi-r4.dtbo
-dtb-y += infix/bananapi,bpi-r4-2g5.dtbo

board/aarch64/bananapi-bpi-r4/dts/infix/bananapi,bpi-r4-2g5.dtso

@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/dts-v1/;
-/plugin/;
-
-/ {
-	compatible = "bananapi,bpi-r4-2g5";
-};
-
-/*
- * On the 2g5 variant, GMAC1 uses the internal 2.5G PHY (eth1 renamed to
- * "wan" by udev).  The switch's port0, which is labeled "wan" in the base
- * DTS, would cause a name collision when the switch driver registers it.
- * Rename it to "lan0" here so the kernel names it correctly from the start.
- */
-&gsw_port0 {
-	label = "lan0";
-};
-
-/*
- * The upstream mt7988a.dtsi sets compatible = "ethernet-phy-ieee802.3-c45"
- * on the internal 2.5G PHY node.  That gives genphy_c45 (built-in) OF-match
- * priority over the PHY-ID-based mtk-2p5ge driver, leaving the PHY powered
- * down and unclaimed.  Replace it with the standard ethernet-phy-idXXXX.XXXX
- * form so of_get_phy_id() registers the PHY as C22 with explicit ID 0x00339c11.
- * mtk-2p5ge then matches via PHY_ID_MATCH_VENDOR(0x00339c00) instead of
- * genphy_c45 winning via OF-match.
- * Note: /delete-property/ is not used because U-Boot fdt apply does not
- * implement property deletion in overlays.
- */
-&int_2p5g_phy {
-	compatible = "ethernet-phy-id0033.9c11";
-};

board/aarch64/bananapi-bpi-r4/dts/infix/bananapi,bpi-r4.dtso

@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/dts-v1/;
-/plugin/;
-
-/ {
-	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
-};
-
-/*
- * The upstream mt7988a-bananapi-bpi-r4.dtsi sets stdout-path = "serial0:..."
- * but the aliases node there only has ethernet entries.  Linux resolves
- * stdout-path by looking in /aliases, so we must add serial0 here.
- * Path references in overlay aliases cannot use &label, so use the full path.
- */
-&{/} {
-	aliases {
-		serial0 = "/soc/serial@11000000";
-	};
-
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb1>;
-			usb-port-names = "USB";
-		};
-	};
-};

board/aarch64/bananapi-bpi-r4/genimage.cfg.in

@@ -1,81 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r4-#TARGET#.img {
-        hdimage {
-                partition-table-type = "gpt"
-                gpt-no-backup = true
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-2g5-emmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtbo /boot/infix/bananapi,bpi-r4.dtbo /boot/infix/bananapi,bpi-r4-2g5.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-2g5-sdmmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-sd.dtbo /boot/infix/bananapi,bpi-r4.dtbo /boot/infix/bananapi,bpi-r4-2g5.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-emmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtbo /boot/infix/bananapi,bpi-r4.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/boot/syslinux/bananapi,bpi-r4-sdmmc-syslinux.conf

@@ -1,5 +0,0 @@
-label Infix (aarch64)
-	kernel /boot/Image
-	fdtdir /boot
-	fdtoverlays /boot/mediatek/mt7988a-bananapi-bpi-r4-sd.dtbo /boot/infix/bananapi,bpi-r4.dtbo
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/factory-config.cfg

@@ -1,404 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan0",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R4"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/udev/rules.d/60-mtk-2p5ge-phy.rules

@@ -1,5 +0,0 @@
-# The mtk-2p5ge PHY driver uses MDIO PHY ID matching, not OF compatible
-# matching.  udev auto-loading is based on MODALIAS, which for DT-described
-# devices is "of:N...C<compatible>" — a format that never matches the driver's
-# "mdio:..." module alias.  Match on OF_COMPATIBLE_0 explicitly instead.
-ACTION=="add", SUBSYSTEM=="mdio_bus", ENV{OF_COMPATIBLE_0}=="ethernet-phy-id0033.9c11", RUN+="/sbin/modprobe -b mtk-2p5ge"

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4-2g5/etc/udev/rules.d/90-bpi-r4-rename-ifaces.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="wan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth2", NAME="sfp1"

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4/etc/factory-config.cfg

@@ -1,396 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "broadcast"
-              },
-              {
-                "id": "domain"
-              },
-              {
-                "id": "hostname",
-                "value": "auto"
-              },
-              {
-                "id": "dns-server"
-              },
-              {
-                "id": "router"
-              },
-              {
-                "id": "netmask"
-              },
-              {
-                "id": "vendor-class",
-                "value": "Banana Pi BPI-R4"
-              }
-            ]
-          }
-        },
-        "ietf-ip:ipv6": {
-          "infix-dhcpv6-client:dhcp": {
-            "option": [
-              {
-                "id": "ntp-server"
-              },
-              {
-                "id": "client-fqdn"
-              },
-              {
-                "id": "domain-search"
-              },
-              {
-                "id": "dns-server"
-              }
-            ]
-          }
-        }
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-    "asymmetric-keys": {
-      "asymmetric-key": [
-        {
-          "name": "genkey",
-          "public-key-format": "infix-crypto-types:ssh-public-key-format",
-          "public-key": "",
-          "private-key-format": "infix-crypto-types:rsa-private-key-format",
-          "cleartext-private-key": "",
-          "certificates": {}
-        }
-      ]
-    }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "read-default": "permit",
-    "write-default": "permit",
-    "exec-default": "permit",
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        },
-        {
-          "name": "operator",
-          "user-name": []
-        },
-        {
-          "name": "guest",
-          "user-name": []
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "operator-acl",
-        "group": [
-          "operator"
-        ],
-        "rule": [
-          {
-            "name": "permit-system-rpcs",
-            "module-name": "ietf-system",
-            "rpc-name": "*",
-            "access-operations": "exec",
-            "action": "permit",
-            "comment": "Operators can reboot, shutdown, and set system time."
-          }
-        ]
-      },
-      {
-        "name": "guest-acl",
-        "group": [
-          "guest"
-        ],
-        "rule": [
-          {
-            "name": "deny-all-write+exec",
-            "module-name": "*",
-            "access-operations": "create update delete exec",
-            "action": "deny",
-            "comment": "Guests cannot change anything or exec rpcs."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-access",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access password hashes."
-          },
-          {
-            "name": "deny-keystore-access",
-            "module-name": "ietf-keystore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access cryptographic keys."
-          },
-          {
-            "name": "deny-truststore-access",
-            "module-name": "ietf-truststore",
-            "access-operations": "*",
-            "action": "deny",
-            "comment": "No user except admins can access trust store."
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-bind": [
-                  {
-                    "local-address": "::"
-                  }
-                ]
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "action": "accept",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.7"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}

board/aarch64/bananapi-bpi-r4/rootfs/usr/share/product/bananapi,bpi-r4/etc/udev/rules.d/90-bpi-r4-rename-ifaces.rules

@@ -1,2 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp2"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth2", NAME="sfp1"

board/aarch64/bananapi-bpi-r4/uboot/emmc-extras.config

@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7988-emmc-env.dtsi"

board/aarch64/bananapi-bpi-r4/uboot/extras.config

@@ -1,40 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_MULTI_DTB_FIT=y
-CONFIG_OF_LIST="mt7988a-bananapi-bpi-r4 mt7988a-bananapi-bpi-r4-2g5"
-
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
-
-CONFIG_MTK_SPIM=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_SPI_FLASH=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_MTD=y
-CONFIG_DM_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTK_SPIM=y
-CONFIG_MTK_SNOR=y
-
-CONFIG_BUTTON=y
-CONFIG_BUTTON_CMD=y
-CONFIG_BUTTON_GPIO=y
-
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_CMD_DM=y

board/aarch64/bananapi-bpi-r4/uboot/mt7988-emmc-env.dtsi

@@ -1,7 +0,0 @@
-#include <mt7988-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7988a-bananapi-bpi-r4.dtb";
-      board   = "bananapi,bpi-r4-emmc";
-      ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; setenv board bananapi,bpi-r4-2g5-emmc; fi";
-};

board/aarch64/bananapi-bpi-r4/uboot/mt7988-env.dtsi

@@ -1,27 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       fdtoverlay_addr_r = "0x47f00000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-                       /*
-                        * Apply BOARD_VARIANT from aux uboot.env.
-                        * Infix writes BOARD_VARIANT=2g5 via fw_setenv on
-                        * BPI-R4-2g5 / BPI-R4P boards to select the correct
-                        * device tree.  Unset = standard R4 (2x SFP+).
-                        */
-                       ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; fi";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-               };
-       };
-};

board/aarch64/bananapi-bpi-r4/uboot/mt7988-sd-env.dtsi

@@ -1,7 +0,0 @@
-#include <mt7988-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7988a-bananapi-bpi-r4.dtb";
-      board   = "bananapi,bpi-r4-sdmmc";
-      ixvariant = "if test \"${BOARD_VARIANT}\" = \"2g5\"; then setenv fdtfile mediatek/mt7988a-bananapi-bpi-r4-2g5.dtb; setenv board bananapi,bpi-r4-2g5-sdmmc; fi";
-};

board/aarch64/bananapi-bpi-r4/uboot/sd-extras.config

@@ -1,2 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7988-sd-env.dtsi"
-CONFIG_OF_LIST="mt7988a-bananapi-bpi-r4-sd"

board/aarch64/bananapi-bpi-r64/Config.in

@@ -1,7 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R64
-	bool "Banana Pi R64"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select SDCARD_AUX
-	help
-	  Build Banana PI R64 support

board/aarch64/bananapi-bpi-r64/LICENSE

@@ -1,13 +0,0 @@
-Copyright (c) 2026 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.