Merge pull request #1332 from kernelkit/kernel-v25.02.x

Bump kernel and update ChangeLog for v25.08.2
doc: update ChangeLog for v25.08.2 release
2026-07-23 09:23:02 +02:00 · 2025-12-19 13:27:25 +01:00 · 2025-12-19 11:36:54 +01:00 · 2025-12-19 11:36:54 +01:00 · 2025-12-19 10:34:57 +01:00 · 2025-12-18 14:12:03 +01:00
864 changed files with 31651 additions and 22109 deletions
@@ -27,17 +27,10 @@ Pull Requests
 Releases
 --------

-Recommended checkpoints, use at your own discretion:
-
 - Make at least one -betaN release to verify the GitHub workflow well in time release day
   - Stuff happens, remember kernelkit/infix#735
 - Make at least one -rcN to flush out any issues in customer repos
   - Easy to forget adaptations/hacks in customer repos -- may need Infix change/support
- - Verify release artifacts (checksums, completeness, no corrupted files)
- - Test on actual hardware for at least one architecture
- - Review ChangeLog for completeness
- - Check for release-blocking issues
- - Verify generated GNS3 appliance, no marketplace update on -rc builds
 - Ensure the markdown link for the release diff is updated
 - Ensure subrepos are tagged (can be automated, see kernelkit/infix#393)
 - Sync tags for all repo. sync activities
@@ -1,215 +0,0 @@
-name: bitSign Infix Release
-
-on:
-  workflow_dispatch:
-    inputs:
-      release_version:
-        description: 'Release version (e.g., v25.08.0)'
-        required: true
-        type: string
-  push:
-    branches: [ sign-with-bitsign ]
-
-jobs:
-  sign-infix-release:
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Checkout repository
-      uses: actions/checkout@v4
-
-    - name: Validate release version format
-      id: validate
-      run: |
-        # Use default version for push events, input version for manual dispatch
-        if [ "${{ github.event_name }}" = "push" ]; then
-          VERSION="v25.08.0"
-          echo "Using default version for push trigger: $VERSION"
-        else
-          VERSION="${{ inputs.release_version }}"
-          echo "Using input version for manual trigger: $VERSION"
-        fi
-
-        # Check if version starts with 'v' and has proper format
-        if ! echo "$VERSION" | grep -qE '^v[0-9]+\.[0-9]+(\.[0-9]+)?(-alpha[0-9]*|-beta[0-9]*|-rc[0-9]*)?$'; then
-          echo "❌ Invalid version format. Expected format: vYY.MM(.PP)(-alphaN|-betaN|-rcN)"
-          echo "Examples: v25.08.0, v25.08.0-alpha1, v25.08.0-rc1"
-          exit 1
-        fi
-
-        # Extract version without 'v' prefix for filename
-        FILE_VERSION="${VERSION#v}"
-        FILENAME="infix-x86_64-${FILE_VERSION}.tar.gz"
-        RELEASE_URL="https://github.com/kernelkit/infix/releases/download/${VERSION}/${FILENAME}"
-
-        echo "✅ Version format valid"
-        echo "file_version=${FILE_VERSION}" >> $GITHUB_OUTPUT
-        echo "filename=${FILENAME}" >> $GITHUB_OUTPUT
-        echo "release_url=${RELEASE_URL}" >> $GITHUB_OUTPUT
-
-    - name: Download Infix release
-      run: |
-        RELEASE_URL="${{ steps.validate.outputs.release_url }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-
-        echo "Downloading Infix release: $FILENAME"
-        echo "From: $RELEASE_URL"
-
-        if ! curl -L "$RELEASE_URL" -o "$FILENAME" --fail --show-error --progress-bar; then
-          echo "❌ Failed to download release file from: $RELEASE_URL"
-          echo "Please verify that the release version exists and contains the x86_64 build."
-          echo "You can check available releases at: https://github.com/kernelkit/infix/releases"
-          exit 1
-        fi
-
-        # Verify download
-        if [ -f "$FILENAME" ] && [ -s "$FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$FILENAME" | awk '{print $5}')
-          echo "✅ Successfully downloaded: $FILENAME ($FILE_SIZE)"
-        else
-          echo "❌ Failed to download release file"
-          exit 1
-        fi
-
-    - name: Create signing request
-      id: create_request
-      run: |
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        RELEASE="infix-x86_64-${FILE_VERSION}"
-
-        echo "Creating signing request for $FILENAME..."
-        echo "RELEASE parameter: $RELEASE"
-
-        # Create signing request using bitSign API
-        RESPONSE=$(curl -s -X POST "https://portal.bitsign.se/api/v1/requests" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -F "file=@$FILENAME" \
-          -F "key=bit42-Demo1" \
-          -F "job=Infix-x86" \
-          -F "parameters={\"RELEASE\": \"$RELEASE\"}")
-
-        echo "API Response: $RESPONSE"
-
-        # Check if request was successful
-        if echo "$RESPONSE" | jq -e '.success == true' > /dev/null; then
-          REQUEST_ID=$(echo "$RESPONSE" | jq -r '.requestId')
-          echo "✅ Request created successfully with ID: $REQUEST_ID"
-          echo "request_id=$REQUEST_ID" >> $GITHUB_OUTPUT
-        else
-          echo "❌ Failed to create signing request"
-          echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-          exit 1
-        fi
-
-    - name: Wait for signing completion
-      id: wait_completion
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        echo "Waiting for signing completion for request: $REQUEST_ID"
-
-        # Poll status for up to 10 minutes (600 seconds) - longer timeout for larger files
-        MAX_WAIT=600
-        WAITED=0
-
-        while [ $WAITED -lt $MAX_WAIT ]; do
-          RESPONSE=$(curl -s -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/status" \
-            -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}")
-
-          STATUS=$(echo "$RESPONSE" | jq -r '.status')
-          echo "Current status: $STATUS (waited ${WAITED}s)"
-
-          if [ "$STATUS" = "completed" ]; then
-            echo "✅ Signing completed successfully!"
-            break
-          elif [ "$STATUS" = "failed" ]; then
-            echo "❌ Signing failed"
-            echo "$RESPONSE" | jq -r '.error // .message // "Unknown error"'
-            exit 1
-          fi
-
-          sleep 10
-          WAITED=$((WAITED + 10))
-        done
-
-        if [ $WAITED -ge $MAX_WAIT ]; then
-          echo "❌ Timeout: Signing did not complete within ${MAX_WAIT} seconds"
-          exit 1
-        fi
-
-    - name: Download signed file
-      id: download_signed
-      run: |
-        REQUEST_ID="${{ steps.create_request.outputs.request_id }}"
-        FILENAME="${{ steps.validate.outputs.filename }}"
-        FILE_VERSION="${{ steps.validate.outputs.file_version }}"
-        SIGNED_FILENAME="infix-x86_64-${FILE_VERSION}-signed.tar.gz"
-
-        echo "Downloading signed file for request: $REQUEST_ID"
-        echo "Expected signed filename: $SIGNED_FILENAME"
-
-        # Download the signed file
-        curl -X GET "https://portal.bitsign.se/api/v1/requests/$REQUEST_ID/download" \
-          -H "Authorization: Bearer ${{ secrets.BITSIGN_API_KEY }}" \
-          -o "$SIGNED_FILENAME" \
-          --fail --show-error
-
-        if [ -f "$SIGNED_FILENAME" ] && [ -s "$SIGNED_FILENAME" ]; then
-          FILE_SIZE=$(ls -lh "$SIGNED_FILENAME" | awk '{print $5}')
-          echo "Successfully downloaded signed file: $SIGNED_FILENAME ($FILE_SIZE)"
-          echo "signed_filename=$SIGNED_FILENAME" >> $GITHUB_OUTPUT
-
-          # Calculate SHA256 checksums for both files
-          ORIGINAL_SHA256=$(sha256sum "$FILENAME" | cut -d' ' -f1)
-          SIGNED_SHA256=$(sha256sum "$SIGNED_FILENAME" | cut -d' ' -f1)
-          echo "original_sha256=$ORIGINAL_SHA256" >> $GITHUB_OUTPUT
-          echo "signed_sha256=$SIGNED_SHA256" >> $GITHUB_OUTPUT
-        else
-          echo "Failed to download signed file"
-          exit 1
-        fi
-
-    - name: Upload signed artifacts
-      uses: actions/upload-artifact@v4
-      with:
-        name: signed-infix-${{ steps.validate.outputs.file_version }}
-        path: ${{ steps.download_signed.outputs.signed_filename }}
-        retention-days: 90
-
-    - name: Summary
-      run: |
-        # Determine the actual version used (could be from push or input)
-        if [ "${{ github.event_name }}" = "push" ]; then
-          ACTUAL_VERSION="v25.08.0"
-        else
-          ACTUAL_VERSION="${{ inputs.release_version }}"
-        fi
-
-        cat >> $GITHUB_STEP_SUMMARY << EOF
-        # bitSign Infix Release Signing Complete
-
-        The Infix release has been successfully signed using the bitSign API.
-
-        ## Signing Details
-
-        | Property | Value |
-        |----------|-------|
-        | 📦 **Original File** | \`${{ steps.validate.outputs.filename }}\` (\`${{ steps.download_signed.outputs.original_sha256 }}\`) |
-        | ✍️ **Signed File** | \`${{ steps.download_signed.outputs.signed_filename }}\` (\`${{ steps.download_signed.outputs.signed_sha256 }}\`) |
-        | 🔑 **Signing Key** | \`bit42-Demo1\` |
-        | ⚙️ **Job Type** | \`Infix-x86\` |
-        | 🆔 **Request ID** | \`${{ steps.create_request.outputs.request_id }}\` |
-        | 📋 **Release Version** | \`\$ACTUAL_VERSION\` |
-        | 🌐 **API Endpoint** | \`portal.bitsign.se\` |
-
-        ## Download Files
-
-        > **The signed release file is available as a workflow artifact:**
-        > **\`signed-infix-${{ steps.validate.outputs.file_version }}\`**
-        >
-        > The artifact contains the signed file: \`${{ steps.download_signed.outputs.signed_filename }}\`
-
-        ---
-
-        **Next Steps:** The signed release can now be distributed with cryptographic verification of authenticity.
-        EOF
@@ -16,12 +16,10 @@ jobs:
      fail-fast: false
      matrix:
        defconfig:
-          - aarch64_qemu_boot
-          - bpi_r3_boot
-          - cn9130_crb_boot
          - fireant_boot
-          - nanopi_r2s_boot
-          - rpi64_boot
+          - cn9130_crb_boot
+          - aarch64_qemu_boot
+          - rpi4_boot
    env:
      MAKEFLAGS: -j5
    steps:
@@ -1,218 +0,0 @@
-name: Create SD Card Images
-
-on:
-  workflow_dispatch:
-    inputs:
-      board:
-        description: 'Board to create image for'
-        type: choice
-        required: true
-        options:
-          - raspberrypi-rpi64
-          - bananapi-bpi-r3
-          - friendlyarm-nanopi-r2s
-        default: 'raspberrypi-rpi64'
-      use_latest_release:
-        description: 'Use latest release artifacts instead of workflow artifacts'
-        type: boolean
-        default: false
-
-jobs:
-  create-image:
-    name: Create SD Card Image for ${{ inputs.board }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v4
-        with:
-          clean: true
-          fetch-depth: 0
-          submodules: recursive
-
-      - name: Install dependencies
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y \
-            genimage \
-            u-boot-tools \
-            parted \
-            gdisk \
-            qemu-utils \
-            dosfstools \
-            e2fsprogs \
-            genext2fs \
-            mtools \
-            jq
-
-      - name: Prepare build environment
-        run: |
-          # Set up directory structure similar to buildroot build
-          mkdir -p output/images
-          mkdir -p build
-
-      - name: Set bootloader and target based on board
-        run: |
-          case "${{ inputs.board }}" in
-            raspberrypi-rpi64)
-              echo "BOOTLOADER=rpi64_boot" >> $GITHUB_ENV
-              echo "TARGET=aarch64" >> $GITHUB_ENV
-              ;;
-            bananapi-bpi-r3)
-              echo "BOOTLOADER=bpi_r3_boot" >> $GITHUB_ENV
-              echo "TARGET=aarch64" >> $GITHUB_ENV
-              ;;
-            friendlyarm-nanopi-r2s)
-              echo "BOOTLOADER=nanopi_r2s_boot" >> $GITHUB_ENV
-              echo "TARGET=aarch64" >> $GITHUB_ENV
-              ;;
-            *)
-              echo "Error: Unknown board ${{ inputs.board }}"
-              exit 1
-              ;;
-          esac
-          echo "Using bootloader: $BOOTLOADER and target: $TARGET for board: ${{ inputs.board }}"
-
-      - name: Download bootloader artifacts
-        if: ${{ !inputs.use_latest_release }}
-        run: |
-          # Download from latest bootloader build workflow on main branch
-          gh run list --workflow=build-boot.yml --branch=main --limit=1 --status=success --json databaseId --jq '.[0].databaseId' > latest_boot_run_id
-          BOOT_RUN_ID=$(cat latest_boot_run_id)
-
-          gh run download ${BOOT_RUN_ID} --name artifact-${BOOTLOADER} --dir temp_bootloader/
-
-          # Extract bootloader directly to output/images
-          cd temp_bootloader/
-          tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-          cd ../
-          rm -rf temp_bootloader/
-
-          echo "Bootloader files extracted to output/images:"
-          ls -la output/images/
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Download Infix artifacts
-        if: ${{ !inputs.use_latest_release }}
-        run: |
-          # Download from latest Kernelkit Trigger workflow for main branch
-          gh run list --workflow=164295764 --branch=main --limit=1 --status=success --json databaseId --jq '.[0].databaseId' > latest_infix_run_id
-          INFIX_RUN_ID=$(cat latest_infix_run_id)
-
-          gh run download ${INFIX_RUN_ID} --name artifact-${TARGET} --dir temp_infix/
-
-          # Extract Infix directly to output/images
-          cd temp_infix/
-          tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-          cd ../
-          rm -rf temp_infix/
-
-          echo "Infix files extracted to output/images:"
-          ls -la output/images/
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Download from latest releases
-        if: ${{ inputs.use_latest_release }}
-        run: |
-          # Download latest bootloader release
-          gh release download latest-boot --pattern "*${BOOTLOADER}*" --dir temp_bootloader/
-          cd temp_bootloader/
-          tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-          cd ../
-          rm -rf temp_bootloader/
-
-          # Download latest Infix release
-          gh release download latest --pattern "*${TARGET}*" --dir temp_infix/
-          cd temp_infix/
-          tar -xzf *.tar.gz --strip-components=1 -C ../output/images/
-          cd ../
-          rm -rf temp_infix/
-
-          echo "All files extracted to output/images:"
-          ls -la output/images/
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Verify extracted files
-        run: |
-          echo "Files available for mkimage.sh:"
-          ls -la output/images/
-          echo ""
-          echo "File types:"
-          file output/images/* || true
-
-      - name: Create SD card image
-        run: |
-          export BINARIES_DIR=$PWD/output/images
-          export BUILD_DIR=$PWD/build
-          export BR2_EXTERNAL_INFIX_PATH=$PWD
-          export RELEASE=""
-          export INFIX_ID="infix"
-          ./utils/mkimage.sh ${{ inputs.board }}
-
-      - name: Verify created image
-        run: |
-          echo "Contents of output/images after mkimage.sh:"
-          ls -lh output/images/
-
-          # Look for SD card image with pattern: *-sdcard.img
-          if ls output/images/*-sdcard.img 1> /dev/null 2>&1; then
-            echo "Found SD card image(s):"
-            for img in output/images/*-sdcard.img; do
-              echo "- $(basename $img)"
-              file "$img"
-              fdisk -l "$img" 2>/dev/null || true
-            done
-          else
-            echo "No SD card image found matching pattern: *-sdcard.img"
-            echo "Available files:"
-            ls -la output/images/
-            exit 1
-          fi
-
-      - name: Upload SD card image
-        uses: actions/upload-artifact@v4
-        with:
-          name: sdcard-image-${{ inputs.board }}-${{ env.BOOTLOADER }}
-          path: |
-            output/images/*-sdcard.img*
-          retention-days: 30
-
-      - name: Create checksums
-        run: |
-          cd output/images/
-          for file in *-sdcard.img; do
-            if [ -f "$file" ]; then
-              sha256sum "$file" > "$file.sha256"
-            fi
-          done
-
-      - name: Upload to release
-        uses: ncipollo/release-action@v1
-        with:
-          allowUpdates: true
-          omitName: true
-          omitBody: true
-          omitBodyDuringUpdate: true
-          prerelease: true
-          tag: "latest-boot"
-          token: ${{ secrets.GITHUB_TOKEN }}
-          artifacts: "output/images/*-sdcard.img*"
-
-      - name: Generate summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # SD Card Image Build Complete! 🚀
-
-          **Board:** ${{ inputs.board }}
-          **Target:** ${{ env.TARGET }}
-          **Bootloader:** ${{ env.BOOTLOADER }}
-          **Artifact Source:** ${{ inputs.use_latest_release && 'Latest Release' || 'Latest Workflow Run' }}
-
-          ## Created Images
-          $(find output/images/ -name "*.img*" -o -name "*.qcow2" -o -name "*.raw" | xargs ls -lh 2>/dev/null | sed 's/^/- /' || echo "- No images found")
-
-          ## Download
-          The SD card image is available as a workflow artifact above.
-          EOF
@@ -1,102 +0,0 @@
-name: Build Release
-
-on:
-  workflow_call:
-    inputs:
-      version:
-        required: true
-        type: string
-      use_cache:
-        required: false
-        type: boolean
-        default: true
-
-jobs:
-  build:
-    name: Build Infix ${{ inputs.version }} [${{ matrix.target }}]
-    runs-on: [self-hosted, release]
-    strategy:
-      matrix:
-        target: [aarch64, x86_64]
-      fail-fast: false
-    steps:
-      - name: Cleanup podman state
-        run: |
-          set -x
-          podman ps -a              || true
-          podman stop -a            || true
-          podman rm -a -f           || true
-          podman volume prune -f    || true
-          podman system prune -a -f || true
-          podman system migrate     || true
-
-      - uses: actions/checkout@v4
-        with:
-          clean: true
-          submodules: recursive
-
-      - name: Set Release Variables
-        id: vars
-        run: |
-          ver=${{ inputs.version }}
-          echo "ver=${ver}" >> $GITHUB_OUTPUT
-          fver=${ver#v}
-          target=${{ matrix.target }}-${fver}
-          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
-          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT
-
-      - name: Restore Cache of dl/
-        if: ${{ inputs.use_cache }}
-        uses: actions/cache@v4
-        with:
-          path: dl/
-          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
-          restore-keys: |
-            dl-
-
-      - name: Restore Cache of .ccache/
-        if: ${{ inputs.use_cache }}
-        uses: actions/cache@v4
-        with:
-          path: .ccache/
-          key: ccache-${{ matrix.target }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
-          restore-keys: |
-            ccache-${{ matrix.target }}-
-            ccache-
-
-      - name: Configure & Build
-        env:
-          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
-        run: |
-          target=${{ matrix.target }}_defconfig
-          echo "Building $target ..."
-          make $target
-          make
-
-      - name: Generate SBOM from Build
-        run: |
-          make legal-info
-
-      - name: Build test specification
-        run: |
-          make test-spec
-
-      - name: Prepare Artifacts
-        run: |
-          cd output/
-          mv images ${{ steps.vars.outputs.dir }}
-          ln -s ${{ steps.vars.outputs.dir }} images
-          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
-
-          mv legal-info legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
-          tar cfz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}.tar.gz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-${{ matrix.target }}
-          path: output/*.tar.gz
-
-      - uses: actions/upload-artifact@v4
-        with:
-          name: artifact-disk-image-${{ matrix.target }}
-          path: output/images/*.qcow2
@@ -35,7 +35,7 @@ on:
      parallel:
        required: false
        type: boolean
-        default: true
+        default: false

 env:
  NAME: ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }}
@@ -59,15 +59,6 @@ jobs:
          rm -rf ./* || true
          rm -rf ./.??* || true
          ls -la ./
-      - name: Cleanup podman state
-        run: |
-          set -x
-          podman ps -a              || true
-          podman stop -a            || true
-          podman rm -a -f           || true
-          podman volume prune -f    || true
-          podman system prune -a -f || true
-          podman system migrate     || true

      - name: Checkout infix repo
        uses: actions/checkout@v4
@@ -119,11 +110,6 @@ jobs:
        run: |
          make ${{ env.TARGET }}_defconfig

-      - name: Cleanup stale containers and ports
-        run: |
-          podman rm -af || true
-          pkill -9 -f rootlessport || true
-
      - name: Unit Test ${{ env.TARGET }}
        run: |
          make test-unit
@@ -1,115 +0,0 @@
-name: Check Kernel 6.12 Release
-
-on:
-  workflow_dispatch: # Allow manual triggering
-
-jobs:
-  check-kernel:
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out infix repository
-        uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-          token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Check out linux repository
-        uses: actions/checkout@v4
-        with:
-          repository: kernelkit/linux
-          path: linux
-          fetch-depth: 0
-          token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-
-      - name: Fetch kernel.org and check for 6.12 release
-        id: check
-        run: |
-          set -e -o pipefail
-          # Fetch the kernel.org frontpage and extract 6.12 version
-          CURRENT_VERSION=$(curl -s https://www.kernel.org/ | grep -oP '6\.12\.\d+' | head -n1)
-
-          if [ -z "$CURRENT_VERSION" ]; then
-            echo "Failed to fetch kernel version"
-            exit 1
-          fi
-
-          echo "current_version=$CURRENT_VERSION" >> $GITHUB_OUTPUT
-          echo "Current 6.12 kernel version: $CURRENT_VERSION"
-
-          # Get the latest tag from our linux tree
-          cd linux
-          git fetch origin
-          LATEST_TAG=$(git tag -l "v6.12.*" | sort -V | tail -n1 | sed 's/^v//')
-          cd ..
-
-          echo "latest_tag=$LATEST_TAG" >> $GITHUB_OUTPUT
-          echo "Latest tag in our tree: $LATEST_TAG"
-
-          if [ "$CURRENT_VERSION" != "$LATEST_TAG" ]; then
-            echo "new_release=true" >> $GITHUB_OUTPUT
-            echo "🎉 New 6.12 kernel released: $CURRENT_VERSION (our version: $LATEST_TAG)"
-          else
-            echo "new_release=false" >> $GITHUB_OUTPUT
-            echo "No change - still at $CURRENT_VERSION"
-          fi
-
-      - name: Set up git credentials
-        if: steps.check.outputs.new_release == 'true'
-        run: |
-          set -e -o pipefail
-          git config --global user.email "ael-bot@users.noreply.github.com"
-          git config --global user.name "ael-bot"
-
-          # Configure git to use the token for HTTPS operations
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "git@github.com:"
-          git config --global url."https://ael-bot:${{ secrets.KERNEL_UPDATE_TOKEN }}@github.com/".insteadOf "https://github.com/"
-
-      - name: Run kernel upgrade script
-        if: steps.check.outputs.new_release == 'true'
-        env:
-          GIT_TERMINAL_PROMPT: 0
-        run: |
-          set -e -o pipefail
-          ./utils/kernel-upgrade.sh linux
-
-      - name: Create pull request
-        if: steps.check.outputs.new_release == 'true'
-        uses: actions/github-script@v7
-        with:
-          github-token: ${{ secrets.KERNEL_UPDATE_TOKEN }}
-          script: |
-            // Check if PR already exists
-            const { data: pulls } = await github.rest.pulls.list({
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              head: `${context.repo.owner}:kernel-upgrade`,
-              state: 'open'
-            });
-
-            if (pulls.length === 0) {
-              const { data: pr } = await github.rest.pulls.create({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                title: `Upgrade to kernel ${{ steps.check.outputs.current_version }}`,
-                head: 'kernel-upgrade',
-                base: 'main',
-                body: `Automated kernel upgrade to version ${{ steps.check.outputs.current_version }}.\n\n**Previous version:** ${{ steps.check.outputs.latest_tag }}\n**New version:** ${{ steps.check.outputs.current_version }}\n**Source:** https://www.kernel.org/\n\nThis PR was automatically created by the kernel release monitoring workflow.`
-              });
-
-              // Add label
-              await github.rest.issues.addLabels({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                issue_number: pr.number,
-                labels: ['ci:main']
-              });
-
-              // Request reviews
-              await github.rest.pulls.requestReviewers({
-                owner: context.repo.owner,
-                repo: context.repo.repo,
-                pull_number: pr.number,
-                reviewers: ['troglobit', 'wkz', 'mattiaswal']
-              });
-            }
@@ -41,7 +41,6 @@ jobs:
          pipx inject mkdocs mkdocs-callouts
          pipx inject mkdocs mike
          pipx inject mkdocs mkdocs-to-pdf
-          pipx inject mkdocs mkdocs-glightbox
          # Workaround, if pipx inject fails to install symlink
          ln -s "$(pipx environment -V PIPX_LOCAL_VENVS)/mkdocs/bin/mike" \
                "$(pipx environment -V PIPX_BIN_DIR)/mike" || true
@@ -10,17 +10,6 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-      - name: Free Disk Space
-        uses: jlumbroso/free-disk-space@main
-        with:
-          tool-cache: true
-          android: true
-          dotnet: true
-          haskell: true
-          large-packages: true
-          docker-images: true
-          swap-storage: false
-
      - name: Install build dependencies
        run: |
          sudo apt-get update
@@ -18,46 +18,96 @@ on:
        type: string

 jobs:
-  set-version:
+  build:
    if: github.repository == 'kernelkit/infix' && startsWith(github.ref, 'refs/tags/')
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.set-ver.outputs.version }}
+    name: Build Infix ${{ github.ref_name }} [${{ matrix.target }}]
+    runs-on: [ self-hosted, release ]
+    strategy:
+      matrix:
+        target: [aarch64, x86_64]
+      fail-fast: false
    steps:
-      - id: set-ver
+      - uses: actions/checkout@v4
+        with:
+          clean: true
+          submodules: recursive
+
+      - name: Set Release Variables
+        id: vars
        run: |
          if [ -n "${{ inputs.version }}" ]; then
              ver=${{ inputs.version }}
          else
              ver=${GITHUB_REF#refs/tags/}
          fi
-          echo "version=${ver}" >> $GITHUB_OUTPUT
+          echo "ver=${ver}" >> $GITHUB_OUTPUT
+          fver=${ver#v}
+          target=${{ matrix.target }}-${fver}
+          echo "dir=infix-$target"        >> $GITHUB_OUTPUT
+          echo "tgz=infix-$target.tar.gz" >> $GITHUB_OUTPUT

-  build:
-    needs: set-version
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: ${{ needs.set-version.outputs.version }}
-      use_cache: true
+      - name: Restore Cache of dl/
+        uses: actions/cache@v4
+        with:
+          path: dl/
+          key: dl-${{ hashFiles('.git/modules/buildroot/HEAD', 'configs/*', 'package/*/*.hash') }}
+          restore-keys: |
+            dl-
+
+      - name: Restore Cache of .ccache/
+        uses: actions/cache@v4
+        with:
+          path: .ccache/
+          key: ccache-${{ matrix.target }}-${{ hashFiles('.git/modules/buildroot/HEAD', 'package/*/*.hash') }}
+          restore-keys: |
+            ccache-${{ matrix.target }}-
+            ccache-
+
+      - name: Configure & Build
+        env:
+          INFIX_RELEASE: ${{ steps.vars.outputs.ver }}
+        run: |
+          target=${{ matrix.target }}_defconfig
+          echo "Building $target ..."
+          make $target
+          make
+
+      - name: Generate SBOM from Build
+        run: |
+          make legal-info
+
+      - name: Build test specification
+        run: |
+          make test-spec
+
+      - name: Prepare Artifacts
+        run: |
+          cd output/
+          mv images ${{ steps.vars.outputs.dir }}
+          ln -s ${{ steps.vars.outputs.dir }} images
+          tar cfz ${{ steps.vars.outputs.tgz }} ${{ steps.vars.outputs.dir }}
+
+          mv legal-info legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
+          tar cfz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}.tar.gz legal-info-${{ matrix.target }}-${{ steps.vars.outputs.ver }}
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: artifact-${{ matrix.target }}
+          path: output/*.tar.gz
+
+      - uses: actions/upload-artifact@v4
+        with:
+          name: artifact-disk-image-${{ matrix.target }}
+          path: output/images/*.qcow2

  release:
    name: Release Infix ${{ github.ref_name }}
    needs: build
-    runs-on: [self-hosted, release]
+    runs-on: [ self-hosted, release ]
    permissions:
      contents: write
      discussions: write
    steps:
-      - name: Cleanup podman state
-        run: |
-          set -x
-          podman ps -a              || true
-          podman stop -a            || true
-          podman rm -a -f           || true
-          podman volume prune -f    || true
-          podman system prune -a -f || true
-          podman system migrate     || true
-
      - uses: actions/checkout@v4
        with:
          submodules: 'true'
@@ -75,7 +125,7 @@ jobs:
          if echo $ver | grep -qE 'v[0-9.]+(-alpha|-beta|-rc)[0-9]*'; then
            echo "pre=true"     >> $GITHUB_OUTPUT
            echo "latest=false" >> $GITHUB_OUTPUT
-          elif echo $ver | grep -qE '^v[0-9.]+\.[0-9.]+(\.[0-9]+)?$'; then
+          elif echo $ver | grep -qE '^v[0-9]+\.[0-9]+(\.0)?$'; then
            echo "pre=false"    >> $GITHUB_OUTPUT
            echo "latest=true"  >> $GITHUB_OUTPUT
            echo "cat=Releases" >> $GITHUB_OUTPUT
@@ -106,9 +156,6 @@ jobs:
        run: |
          awk '/^-----*$/{if (x == 1) exit; x=1;next}x' doc/ChangeLog.md \
              |head -n -1 > release.md
-          echo "" >> release.md
-          echo "> [!TIP]" >> release.md
-          echo "> **Try Infix in GNS3!** Download the appliance from the [GNS3 Marketplace](https://gns3.com/marketplace/appliances/infix) to test Infix in a virtual network environment without hardware." >> release.md
          cat release.md

      - uses: ncipollo/release-action@v1
@@ -41,16 +41,6 @@ jobs:
    name: Regression Test ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.name || inputs.name }} ${{ github.event_name == 'workflow_dispatch' && github.event.inputs.target || inputs.target }}
    runs-on: [self-hosted, regression]
    steps:
-      - name: Cleanup podman state
-        run: |
-          set -x
-          podman ps -a              || true
-          podman stop -a            || true
-          podman rm -a -f           || true
-          podman volume prune -f    || true
-          podman system prune -a -f || true
-          podman system migrate     || true
-
      - name: Checkout infix repo
        uses: actions/checkout@v4
        with:
@@ -100,8 +90,7 @@ jobs:
      - name: Publish Test Result for ${{ env.TARGET }}
        # Ensure this runs even if Regression Test fails
        if: always()
-        run: |
-          cat $TEST_PATH/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY
+        run: cat $TEST_PATH/.log/last/result-gh.md >> $GITHUB_STEP_SUMMARY

      - name: Generate Test Report for ${{ env.TARGET }}
        # Ensure this runs even if Regression Test fails
@@ -14,59 +14,26 @@ concurrency:
  cancel-in-progress: true

 jobs:
-  # Gate all builds through this check to prevent wasted runs.  Only run on
-  # 'labeled' events when the label is actually 'ci:main'.  Concurrency control
-  # above handles canceling the 'opened' event when 'labeled' arrives quickly
-  # after (e.g., when creating a PR with ci:main already attached). See #1154.
-  check-trigger:
-    if: |
-      startsWith(github.repository, 'kernelkit/') &&
-      (github.event_name != 'pull_request' ||
-       github.event.action != 'labeled' ||
-       github.event.label.name == 'ci:main')
-    runs-on: ubuntu-latest
-    outputs:
-      x86_64_target: ${{ steps.set-targets.outputs.x86_64_target }}
-      aarch64_target: ${{ steps.set-targets.outputs.aarch64_target }}
-    steps:
-      - run: |
-          echo "Triggering build, logging meta data ..."
-          echo "Event  : ${{ github.event_name }}"
-          echo "Action : ${{ github.event.action }}"
-          echo "Ref    : ${{ github.ref }}"
-          echo "PR     : ${{ github.event.pull_request.number }}"
-          echo "Label  : ${{ github.event.label.name }}"
-      - id: set-targets
-        run: |
-          if [[ "${{ github.event_name }}" == "pull_request" ]] &&           \
-             ! echo '${{ toJSON(github.event.pull_request.labels.*.name) }}' \
-             | grep -q "ci:main"; then
-            echo "x86_64_target=x86_64_minimal" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64_minimal" >> $GITHUB_OUTPUT
-          else
-            echo "x86_64_target=x86_64" >> $GITHUB_OUTPUT
-            echo "aarch64_target=aarch64" >> $GITHUB_OUTPUT
-          fi
-
  build-x86_64:
-    needs: check-trigger
+    if: startsWith(github.repository, 'kernelkit/')
    uses: ./.github/workflows/build.yml
    with:
      name: "infix"
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
+      target: ${{ github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'ci:main') && 'x86_64_minimal' || 'x86_64' }}

  build-aarch64:
-    needs: check-trigger
+    if: startsWith(github.repository, 'kernelkit/')
    uses: ./.github/workflows/build.yml
    with:
      name: "infix"
-      target: ${{ needs.check-trigger.outputs.aarch64_target }}
+      target: ${{ github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'ci:main') && 'aarch64_minimal' || 'aarch64' }}

  test-run-x86_64:
-    needs: [check-trigger, build-x86_64]
+    if: startsWith(github.repository, 'kernelkit/')
+    needs: build-x86_64
    uses: ./.github/workflows/test.yml
    with:
-      target: ${{ needs.check-trigger.outputs.x86_64_target }}
+      target: ${{ github.event_name == 'pull_request' && !contains(github.event.pull_request.labels.*.name, 'ci:main') && 'x86_64_minimal' || 'x86_64' }}
      name: "infix"

  test-publish-x86_64:
@@ -1,68 +0,0 @@
-# Weekly release build to catch flaky tests and verify clean builds.
-# Runs without caches (ccache) to ensure reproducibility. See issue #1003.
-name: Weekly Build
-
-on:
-  schedule:
-    - cron: '5 0 * * 6'  # Saturday at 00:05 UTC, same as Coverity
-  workflow_dispatch:
-
-jobs:
-  build:
-    if: github.repository == 'kernelkit/infix'
-    uses: ./.github/workflows/build-release.yml
-    with:
-      version: "latest"
-      use_cache: false
-
-  publish:
-    name: Publish Weekly Build
-    needs: build
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/download-artifact@v4
-        with:
-          pattern: "artifact-*"
-          merge-multiple: true
-
-      - name: Create checksums
-        run: |
-          for file in *.tar.gz; do
-            sha256sum $file > $file.sha256
-          done
-          if ls *.qcow2 &>/dev/null; then
-            for file in *.qcow2; do
-              sha256sum "$file" > "$file.sha256"
-            done
-          fi
-
-      - uses: ncipollo/release-action@v1
-        with:
-          tag: latest
-          name: "Latest Weekly Build"
-          prerelease: true
-          makeLatest: false
-          allowUpdates: true
-          removeArtifacts: true
-          body: |
-            Automated weekly build from `${{ github.sha }}`.
-
-            This build runs without caches to catch potential flaky tests and build issues.
-            Not intended for production use - use official releases instead.
-
-            **Commit:** ${{ github.sha }}
-            **Built:** ${{ github.run_id }}
-          artifacts: "*.tar.gz*,*.qcow2*"
-
-      - name: Summary
-        run: |
-          cat <<EOF >> $GITHUB_STEP_SUMMARY
-          # Weekly Build Published! :package:
-
-          Latest artifacts uploaded to:
-           <https://github.com/kernelkit/infix/releases/tag/latest>
-
-          Built from commit: \`${{ github.sha }}\`
-          EOF
@@ -1,5 +1,3 @@
-source "$BR2_EXTERNAL_INFIX_PATH/board/Config.in"
-
 menu "Branding"

 config INFIX_VENDOR
@@ -1,6 +1,6 @@
-[![License Badge][]][License] [![Release Badge][]][Release] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]
+[![License Badge][]][License] [![GitHub Status][]][GitHub] [![Coverity Status][]][Coverity Scan] [![Discord][discord-badge]][discord-url]

-<img align="right" src="doc/logo.png" alt="Infix — Immutable.Friendly.Secure" width=480 padding=10>
+<img align="right" src="doc/logo.png" alt="Infix - Linux <3 NETCONF" width=480 border=10>

 Turn any ARM or x86 device into a powerful, manageable network appliance
 in minutes. From $35 Raspberry Pi boards to enterprise switches — deploy
@@ -112,12 +112,10 @@ containers for any custom functionality you need.
 ### Supported Platforms

 - **Raspberry Pi 4B** - Perfect for home labs, learning, and prototyping
- **Banana Pi-R3** - Your next home router and gateway
- **NanoPi R2S** - Compact dual-port router in a tiny package
+- **NanoPi R2S** - Compact dual-port router in a tiny package  
 - **x86_64** - Run in VMs or on mini PCs for development and testing
- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM64 platforms
- **Microchip SparX-5i** - Enterprise switching capabilities
- **NXP i.MX8MP EVK** - Highly capable ARM64 SoC
+- **Marvell CN9130 CRB, EspressoBIN** - High-performance ARM platforms
+- **Microchip SparX-5i, NXP i.MX8MP EVK** - Enterprise switching capabilities
 - **StarFive VisionFive2** - RISC-V architecture support

 *Why start with Raspberry Pi?* It's affordable, widely available, has
@@ -129,33 +127,18 @@ deployments.

 ## Technical Details

-<a href="https://bitsign.se">
-  <picture>
-    <source media="(prefers-color-scheme: dark)" srcset="https://bitsign.se/assets/badges/bitsign-badge-dark-mode.png">
-    <source media="(prefers-color-scheme: light)" srcset="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png">
-    <img alt="bitSign - Code Signing" src="https://bitsign.se/assets/badges/bitsign-badge-light-mode.png" align="right" width=150 padding=10>
-  </picture>
-</a>
-
-Built on proven open-source foundations: [Linux][0], [Buildroot][1], and
-[sysrepo][2] — for reliability you can trust:
+Built on proven open-source foundations ([Buildroot][1] + [sysrepo][2])
+for reliability you can trust:

 - **Immutable OS**: Read-only filesystem, atomic updates, instant rollback
 - **YANG Configuration**: Industry-standard models with auto-generated tooling
 - **Hardware Acceleration**: Linux switchdev support for wire-speed packet processing
 - **Container Integration**: Docker support with flexible network and hardware access
 - **Memory Efficient**: Runs comfortably on devices with as little as 256 MB RAM
- **Code Signing**: Releases are cryptographically signed for integrity verification

 Perfect for everything from resource-constrained edge devices to
 high-throughput network appliances.

-With the entire system modeled in YANG, scalability is no longer an
-issue, be it in development, testing, or end users deploying and
-monitoring their devices.  All knobs and dials are accessible from the
-CLI (console/SSH), or remotely using the native NETCONF or RESTCONF
-APIs.
-
 > Check the *[Latest Build][]* for bleeding-edge features.

 ---
@@ -165,9 +148,6 @@ APIs.
  <br />Infix development is sponsored by <a href="https://wires.se">Wires</a>
 </div>

-![Alt](https://repobeats.axiom.co/api/embed/5ce7a2a67edc923823afa0f60c327a6e8575b6e9.svg "Repobeats analytics image")
-
-[0]: https://www.kernel.org
 [1]: https://buildroot.org/ "Buildroot Homepage"
 [2]: https://www.sysrepo.org/ "Sysrepo Homepage"
 [3]: https://kernelkit.org/infix/latest/cli/introduction/
@@ -176,8 +156,6 @@ APIs.
 [Latest Build]:    https://github.com/kernelkit/infix/releases/tag/latest "Latest build"
 [License]:         https://en.wikipedia.org/wiki/GPL_license
 [License Badge]:   https://img.shields.io/badge/License-GPL%20v2-blue.svg
-[Release]:         https://github.com/kernelkit/infix/releases
-[Release Badge]:   https://img.shields.io/github/v/release/kernelkit/infix 
 [GitHub]:          https://github.com/kernelkit/infix/actions/workflows/build.yml/
 [GitHub Status]:   https://github.com/kernelkit/infix/actions/workflows/build.yml/badge.svg
 [Coverity Scan]:   https://scan.coverity.com/projects/29393
@@ -1,7 +0,0 @@
-menu "Board Support"
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/riscv64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/x86_64/Config.in"
-
-endmenu
@@ -1,13 +0,0 @@
-if BR2_aarch64
-
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/alder-alder/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/bananapi-bpi-r3/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/freescale-imx8mp-evk/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/friendlyarm-nanopi-r2s/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-cn9130-crb/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/marvell-espressobin/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/microchip-sparx5-pcb135/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/raspberrypi-rpi64/Config.in"
-source "$BR2_EXTERNAL_INFIX_PATH/board/aarch64/styx-dcp-sc-28p/Config.in"
-
-endif
@@ -4,8 +4,51 @@ aarch64
 Board Specific Documentation
 ----------------------------

- [Banana Pi R3](banana-pi-r3/)
 - [Marvell CN9130-CRB](cn9130-crb/)
 - [Microchip SparX-5i PCB135 (eMMC)](sparx5-pcb135/)
 - [NanoPi R2S](r2s/)
- [Raspberry Pi 64-bit](raspberry-pi64/)
+- [Raspberry Pi 4 b](#raspberry-pi-4-b)
+
+# Raspberry Pi 4 b
+
+## Support level
+Full support for base board but not any extension board on the
+GPIOs.
+
+### Touch screen
+The [Raspberry Pi touch display v1][RPI-TOUCH] is supported, including
+touch functionality. There are multiple touchscreens on the market for
+Raspberry Pi, but only the official (first version with 800x480
+resolution) is currently supported. Infix supplies all drivers
+required to utilize the hardware, but you need to add the actual
+graphical application in a container.
+
+There are some important considerations you need to know about when
+using Infix for graphical applications. The container needs access to
+/dev/dri/ to be able to access the graphics card, and it also needs
+access to /run/udev to be able to find the input devices.
+
+Example of running Doom in Infix:
+
+```cli
+	admin@example:/> configure
+	admin@example:/config/> edit container doom
+	admin@example:/config/container/doom/> set image docker://mattiaswal/alpine-doom:latest
+	admin@example:/config/container/doom/> set privileged
+	admin@example:/config/container/doom/> edit mount udev
+	admin@example:/config/container/doom/mount/udev/> set type bind
+	admin@example:/config/container/doom/mount/udev/> set target /run/udev/
+	admin@example:/config/container/doom/mount/udev/> set source /run/udev/
+	admin@example:/config/container/doom/mount/udev/> end
+	admin@example:/config/container/doom/mount/xorg.conf/> set content U2VjdGlvbiAiT3V0cHV0Q2xhc3MiCiAgSWRlbnRpZmllciAidmM0IgogIE1hdGNoRHJpdmVyICJ2YzQiCiAgRHJpdmVyICJtb2Rlc2V0dGluZyIKICBPcHRpb24gIlByaW1hcnlHUFUiICJ0cnVlIgpFbmRTZWN0aW9uCg==
+	admin@example:/config/container/doom/mount/xorg.conf/> set target /etc/X11/xorg.conf
+	admin@example:/config/container/doom/mount/xorg.conf/> end
+	admin@example:/config/container/doom/> edit volume var
+	admin@example:/config/container/doom/volume/var/> set target /var
+	admin@example:/config/container/doom/volume/var/> leave
+	admin@example:/>
+
+```
+
+
+[RPI-TOUCH]: https://www.raspberrypi.com/products/raspberry-pi-touch-display/
@@ -1,10 +0,0 @@
-config BR2_PACKAGE_BANANAPI_BPI_R3
-	bool "Banana Pi R3"
-	depends on BR2_aarch64
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_LINUX_FIRMWARE
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK
-	select BR2_PACKAGE_LINUX_FIRMWARE_MEDIATEK_MT7986
-	select SDCARD_AUX
-	help
-	  Build Banana PI R3 support
@@ -1,27 +0,0 @@
-# Banana Pi R3
-
-## Support level
-Full support for all Infix enabled features including switched ethernet ports, WiFi,
-and SFP interfaces. The board includes comprehensive hardware support for
-MediaTek MT7986 SoC features.
-
-### Hardware features
-The Banana Pi R3 is a high-performance networking board featuring:
- MediaTek MT7986 ARM Cortex-A53 quad-core processor
- 4x Gigabit LAN ports (lan1-lan4)
- 1x Gigabit WAN port
- 2x SFP ports (sfp1, sfp2) for fiber connectivity
- Dual WiFi interfaces (wifi0 for 2.4GHz, wifi1 for 5GHz)
- USB support
- SD card boot support
-
-### Network configuration
-The board comes preconfigured with:
- 4 switched LAN ports for internal networking
- Dedicated WAN port with DHCP client enabled
- SFP ports for high-speed fiber connections
- Dual WiFi interfaces for wireless connectivity
-
-### Pre-built images
-SD card image: [infix-bpi-r3-sdcard.img](https://github.com/kernelkit/infix/releases/download/latest-boot/infix-bpi-r3-sdcard.img)
-
@@ -1,36 +0,0 @@
-define BANANAPI_BPI_R3_LINUX_CONFIG_FIXUPS
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MACH_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_MT7986)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_MT6577)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_THERMAL,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_UART)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_WATCHDOG)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MEDIATEK_GE_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_MEDIATEK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_MEDIATEK_SOC)
-	$(call KCONFIG_SET_OPT,CONFIG_NET_DSA_MT7530,m)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_MEDIATEK_GEN3,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_SCPSYS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_MTK)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MTK_HSDMA)
-	$(call KCONFIG_SET_OPT,CONFIG_MT7915E,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MT798X_WMAC)
-	$(call KCONFIG_SET_OPT,CONFIG_MTK_SOC_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_I2C_MT65XX,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_XHCI_MTK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_TPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_MTK_XSPHY,m)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_GPIO,y)
-	$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_MT6380,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PWM_MEDIATEK,m)
-	$(call KCONFIG_SET_OPT,CONFIG_SENSORS_PWM_FAN,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_MTK_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_CRYPTO_DEV_SAFEXCEL,m)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))
@@ -1 +0,0 @@
-dtb-y += mediatek/mt7986a-bananapi-bpi-r3-sd.dtb
@@ -1,2 +0,0 @@
-#include "mt7986a-bananapi-bpi-r3.dtsi"
-#include "mt7986a-bananapi-bpi-r3-sd.dtsi"
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Copyright (C) 2021 MediaTek Inc.
- * Author: Sam.Shih <sam.shih@mediatek.com>
- */
-
-/*
-This is copied from linux where it is an overlay, unfortunatly it is not
-possible to use dtbo in sysboot unless present in syslinux.conf
-*/
-&{/soc/mmc@11230000} {
-	bus-width = <4>;
-	max-frequency = <52000000>;
-	cap-sd-highspeed;
-	status = "okay";
-};
@@ -1,59 +0,0 @@
-#include <arm64/mediatek/mt7986a-bananapi-bpi-r3.dts>
-
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-			usb-ports = <&ssusb>;
-			usb-port-names = "USB";
-		};
-	};
-};
-
-&cpu_thermal {
-	/delete-node/ trips;
-	/delete-node/ cooling-maps;
-	trips {
-		cpu_trip_active_cool: cpu-trip-active-cool {
-			temperature = <40000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_low: cpu-trip-active-low {
-			temperature = <45000>;   // 40°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_active_med: cpu-trip-active-med {
-			temperature = <60000>;   // 60°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "active";
-		};
-		cpu_trip_hot: cpu-trip-hot {
-			temperature = <80000>;   // 80°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "hot";
-		};
-		cpu_trip_critical: cpu-trip-critical {
-			temperature = <90000>;   // 90°C
-			hysteresis = <2000>;     // 2°C hysteresis
-			type = "critical";
-		};
-	};
-
-	cooling-maps {
-		map-cpu-40deg {
-			cooling-device = <&fan 0 0>;
-			trip = <&cpu_trip_active_cool>;
-		};
-		map-cpu-45deg {
-			cooling-device = <&fan 1 1>;
-			trip = <&cpu_trip_active_low>;
-		};
-		map-cpu-60deg {
-			cooling-device = <&fan 2 2>;
-			trip = <&cpu_trip_active_med>;
-		};
-	};
-};
@@ -1,82 +0,0 @@
-image cfg.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-        empty = true
-        temporary = true
-        size = 128M
-        ext4 {
-                label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-        }
-}
-
-image #INFIX_ID##VERSION#-bpi-r3-sdcard.img {
-        hdimage {
-                partition-table-type = "gpt"
-
-        }
-        # BL2 bootloader partition (MediaTek official location)
-	partition bl2 {
-		  image = "bl2.img"
-		  offset = 1024s   # 0x80000 = sector 1024
-		  size = 4M        # 0x400000
-		  bootable = true
-	}
-
-	# Factory/calibration data (sectors 9216-13311)
-	partition factory {
-		offset = 4608K  # 0x480000
-		size = 2M       # 0x200000
-	}
-
-	# FIP partition - BL31 + U-Boot (sectors 13312-17407)
-        partition fip {
-#		partition-type = 0x83  # Linux filesystem
-                image = "fip.bin"
-                offset = 13312s
-                size = 4096s
-        }
-
-        partition aux {
-                partition-uuid = D4EF35A0-0652-45A1-B3DE-D63339C82035
-                image = "aux.ext4"
-        }
-
-        partition primary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition secondary {
-                partition-type-uuid = 0FC63DAF-8483-4772-8E79-3D69D8477DE4
-                bootable = true
-                size = 250M
-                image = "rootfs.squashfs"
-        }
-
-        partition cfg {
-                partition-uuid = 7aa497f0-73b5-47e5-b2ab-8752d8a48105
-                image = "cfg.ext4"
-        }
-
-        partition var {
-                partition-uuid = 8046A06A-E45A-4A14-A6AD-6684704A393F
-                image = "var.ext4"
-        }
-}
@@ -1,333 +0,0 @@
-{
-  "ieee802-dot1ab-lldp:lldp": {
-    "infix-lldp:enabled": true
-  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "name": "USB",
-        "class": "infix-hardware:usb",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      },
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB2",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
-  "ietf-interfaces:interfaces": {
-    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan3",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lan4",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
-      {
-        "name": "lo",
-        "type": "infix-if-type:loopback",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "127.0.0.1",
-              "prefix-length": 8
-            }
-          ]
-        },
-        "ietf-ip:ipv6": {
-          "address": [
-            {
-              "ip": "::1",
-              "prefix-length": 128
-            }
-          ]
-        }
-      },
-      {
-        "name": "sfp1",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "sfp2",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {}
-      },
-      {
-        "name": "wan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {"id": "ntp-server"},
-              {"id": "broadcast"},
-              {"id": "domain"},
-              {"id": "hostname"},
-              {"id": "dns-server"},
-              {"id": "router"},
-              {"id": "netmask"}
-            ]
-          }
-        }
-      },
-      {
-        "name": "wifi0",
-        "type": "infix-if-type:wifi"
-      },
-      {
-        "name": "wifi1",
-        "type": "infix-if-type:wifi"
-      }
-    ]
-  },
-  "ietf-keystore:keystore": {
-        "asymmetric-keys": {
-            "asymmetric-key": [
-                {
-                    "name": "genkey",
-                    "public-key-format": "infix-crypto-types:ssh-public-key-format",
-                    "public-key": "",
-                    "private-key-format": "infix-crypto-types:rsa-private-key-format",
-                    "cleartext-private-key": "",
-                    "certificates": {}
-                }
-            ]
-        }
-  },
-  "ietf-netconf-acm:nacm": {
-    "enable-nacm": true,
-    "groups": {
-      "group": [
-        {
-          "name": "admin",
-          "user-name": [
-            "admin"
-          ]
-        }
-      ]
-    },
-    "rule-list": [
-      {
-        "name": "admin-acl",
-        "group": [
-          "admin"
-        ],
-        "rule": [
-          {
-            "name": "permit-all",
-            "module-name": "*",
-            "access-operations": "*",
-            "action": "permit",
-            "comment": "Allow 'admin' group complete access to all operations and data."
-          }
-        ]
-      },
-      {
-        "name": "default-deny-all",
-        "group": [
-          "*"
-        ],
-        "rule": [
-          {
-            "name": "deny-password-read",
-            "module-name": "ietf-system",
-            "path": "/ietf-system:system/authentication/user/password",
-            "access-operations": "*",
-            "action": "deny"
-          }
-        ]
-      }
-    ]
-  },
-  "ietf-netconf-server:netconf-server": {
-    "listen": {
-      "endpoints": {
-        "endpoint": [
-          {
-            "name": "default-ssh",
-            "ssh": {
-              "tcp-server-parameters": {
-                "local-address": "::"
-              },
-              "ssh-server-parameters": {
-                "server-identity": {
-                  "host-key": [
-                    {
-                      "name": "default-key",
-                      "public-key": {
-                        "central-keystore-reference": "genkey"
-                      }
-                    }
-                  ]
-                }
-              }
-            }
-          }
-        ]
-      }
-    }
-  },
-  "ietf-system:system": {
-    "hostname": "bpi-%m",
-    "ntp": {
-      "server": [
-        {
-          "name": "default",
-          "udp": {
-            "address": "pool.ntp.org"
-          }
-        }
-      ]
-    },
-    "authentication": {
-      "user": [
-        {
-          "name": "admin",
-          "password": "$factory$",
-          "infix-system:shell": "bash"
-        }
-      ]
-    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
-  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
-      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
-        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
-      }
-    ]
-  },
-  "infix-meta:meta": {
-    "version": "1.6"
-  },
-  "infix-services:mdns": {
-    "enabled": true
-  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
-  "infix-services:web": {
-    "enabled": true,
-    "console": {
-      "enabled": true
-    },
-    "netbrowse": {
-      "enabled": true
-    },
-    "restconf": {
-      "enabled": true
-    }
-  }
-}
-
@@ -1,3 +0,0 @@
-#!/bin/sh
-udevadm control --reload-rules
-udevadm trigger --subsystem-match=net --action=add
@@ -1 +0,0 @@
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp1"
@@ -1,12 +0,0 @@
-CONFIG_AUTOBOOT=y
-CONFIG_BOOTDELAY=2
-# CONFIG_MMC_PCI is not set
-CONFIG_ENV_IS_NOWHERE=y
-# CONFIG_ENV_IS_IN_MMC is not set
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_MTU3=y
-CONFIG_CMD_USB=y
-CONFIG_PHY=y
-CONFIG_PHY_MTK_TPHY=y
@@ -1,25 +0,0 @@
-/ {
-       config {
-               env: environment {
-                       /* After the MMC driver has enabled bus power,
-                        * the controller seems to sometimes detect a
-                        * card removal state , which causes it to
-                        * disable power again. This hack re-enables the
-                        * bus power in those cases.
-                        */
-                       bootcmd = "run ixboot";
-                       boot_targets = "mmc0";
-                       ethprime = "eth0";
-                       fdt_addr_r = "0x43f00000";
-                       kernel_addr_r = "0x44000000";
-                       scriptaddr = "0x48000000";
-                       ramdisk_addr_r = "0x4A000000";
-
-                       /* This is a development platform, keep
-                        * developer mode statically enabled.
-                        */
-                       ixbtn-devmode = "setenv dev_mode yes; echo Enabled";
-                       ixbtn-factory = "echo \"No button available, use bootmenu\"";
-               };
-       };
-};
@@ -1,5 +0,0 @@
-#include <mt7986-env.dtsi>
-
-&env {
-      fdtfile = "mediatek/mt7986a-bananapi-bpi-r3-sd.dtb";
-};
@@ -1 +0,0 @@
-CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-sd-env.dtsi"
@@ -1,9 +0,0 @@
-config BR2_PACKAGE_FRIENDLYARM_NANOPI_R2S
-	bool "FriendlyElec NanoPi R2S"
-	depends on BR2_aarch64
-	select SDCARD_AUX
-	select BR2_PACKAGE_INPUT_EVENT_DAEMON
-	select BR2_PACKAGE_LINUX_FIRMWARE_RTL_815X
-	help
-	  FriendlyElec NanoPi R2S is a compact router board based on
-	  the Rockchip RK3328 SoC with dual Gigabit Ethernet ports.
@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
@@ -1 +0,0 @@
-dtb-y += rockchip/rk3328-nanopi-r2s.dtb
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common Infix OS defaults
- */
-
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-		};
-	};
-};
@@ -1,23 +0,0 @@
-#include <arm64/rockchip/rk3328-nanopi-r2s.dts>
-#include "infix.dtsi"
-
-&rtl8153 {
-	/*
-	 * Fix port number: device is on port 1, not port 2
-	 *
-	 * The kernel's usb_of_get_connect_type() function checks for child
-	 * nodes with a 'reg' property matching the physical port number to
-	 * determine if a USB port is "hard-wired" (internal) vs external.
-	 * With authorized_default=2, only hard-wired ports are automatically
-	 * authorized. The RTL8153 shows up as device 3-1 (hub 3, port 1), so
-	 * reg must be <1> for the kernel to mark it as USB_PORT_CONNECT_TYPE_HARD_WIRED
-	 * and authorize it automatically at boot.
-	 */
-	reg = <1>;
-};
-
-&{/chosen/infix} {
-	/* Expose only the external USB 2.0 port for user management */
-	usb-ports = <&usb_host0_ehci>;
-	usb-port-names = "USB";
-};
@@ -1,78 +0,0 @@
-define FRIENDLYARM_NANOPI_R2S_LINUX_CONFIG_FIXUPS
-	# Rockchip RK3328 SoC
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_IOMMU)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_PM_DOMAINS)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_IODOMAIN)
-
-	# PHY drivers
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_EMMC)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_INNO_USB2)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PHY_ROCKCHIP_TYPEC)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_ROCKCHIP_USB,m)
-	$(call KCONFIG_SET_OPT,CONFIG_PHY_ROCKCHIP_PCIE,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_ROCKCHIP_PHY)
-
-	# Clocks and Power Management
-	$(call KCONFIG_ENABLE_OPT,CONFIG_COMMON_CLK_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CLK_RK3328)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_COMMON_CLK_PWM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PWM_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REGULATOR_GPIO)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REGULATOR_RK808)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CHARGER_RK817)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_RK805)
-
-	# I2C Controller
-	$(call KCONFIG_ENABLE_OPT,CONFIG_I2C_RK3X)
-
-	# I2C/SPI/MFD
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MFD_RK8XX_I2C)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MFD_RK8XX_SPI)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_SPI_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_RK805_PWRKEY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_RTC_DRV_RK808)
-
-	# MMC/Storage
-	$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_DW_ROCKCHIP)
-
-	# PCIe
-	$(call KCONFIG_SET_OPT,CONFIG_PCIE_ROCKCHIP_HOST,m)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_PCIE_ROCKCHIP_DW_HOST)
-
-	# Thermal and ADC
-	$(call KCONFIG_SET_OPT,CONFIG_ROCKCHIP_THERMAL,m)
-	$(call KCONFIG_SET_OPT,CONFIG_ROCKCHIP_SARADC,m)
-
-	# Crypto
-	$(call KCONFIG_ENABLE_OPT,CONFIG_CRYPTO_DEV_ROCKCHIP)
-
-	# NVMEM
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_ROCKCHIP_EFUSE,m)
-	$(call KCONFIG_SET_OPT,CONFIG_NVMEM_ROCKCHIP_OTP,m)
-
-	# Network: STMMAC Ethernet (WAN port - RK3328 GMAC with RTL8211E PHY)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_STMICRO)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_ETH)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_STMMAC_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_DWMAC_ROCKCHIP)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_REALTEK_PHY)
-
-	# Network: USB Ethernet (LAN port - RTL8153 via USB 3.0)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_NET_DRIVERS,m)
-	$(call KCONFIG_SET_OPT,CONFIG_USB_RTL8152,m)
-
-	# USB 3.0 xHCI Controller (required for RTL8153 LAN port)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_XHCI_HCD)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_XHCI_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_DWC3_HOST)
-
-	# USB 2.0 Host
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_HCD)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_HCD_PLATFORM)
-	$(call KCONFIG_ENABLE_OPT,CONFIG_USB_EHCI_ROOT_HUB_TT)
-endef
-
-$(eval $(ix-board))
-$(eval $(generic-package))
@@ -1,3 +0,0 @@
-#!/bin/sh
-udevadm control --reload-rules
-udevadm trigger --subsystem-match=net --action=add
@@ -56,7 +56,6 @@ CONFIG_JUMP_LABEL=y
 # CONFIG_GCC_PLUGINS is not set
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KSM=y
@@ -244,6 +243,9 @@ CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
@@ -332,20 +334,12 @@ CONFIG_MDIO_BITBANG=y
 CONFIG_MDIO_MVUSB=m
 CONFIG_MDIO_MSCC_MIIM=y
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
-CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
 # CONFIG_USB_NET_CDC_NCM is not set
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
 # CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
+# CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
@@ -407,6 +401,7 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_SYSFS=y
 CONFIG_SOFT_WATCHDOG=y
 CONFIG_GPIO_WATCHDOG=y
+CONFIG_ARM_SBSA_WATCHDOG=y
 CONFIG_ARMADA_37XX_WATCHDOG=y
 CONFIG_I6300ESB_WDT=y
 CONFIG_MFD_MAX77620=y
@@ -433,7 +428,7 @@ CONFIG_REGULATOR_S2MPS11=y
 # CONFIG_HID_MICROSOFT is not set
 # CONFIG_HID_MONTEREY is not set
 CONFIG_USB_ULPI_BUS=y
-CONFIG_USB=y
+CONFIG_USB=m
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=m
 CONFIG_USB_XHCI_MVEBU=m
@@ -444,8 +439,6 @@ CONFIG_USB_OHCI_HCD_PLATFORM=m
 CONFIG_USB_STORAGE=m
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PCI=y
 CONFIG_USB_CHIPIDEA=m
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
@@ -557,7 +550,14 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_PANIC_TIMEOUT=20
-CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_HARDLOCKUP_DETECTOR=y
+CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY=y
+CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_WQ_WATCHDOG=y
+CONFIG_WQ_CPU_INTENSIVE_REPORT=y
+CONFIG_TEST_LOCKUP=m
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_FUNCTION_TRACER=y
@@ -5,28 +5,21 @@ image cfg.ext4 {

 	ext4 {
 		label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
 	}
 }

-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
 image var.ext4 {
 	empty = true
 	temporary = true
-	size = 128M
+	size = 512M

 	ext4 {
 		label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
+		use-mke2fs = true
 	}
 }

-image #INFIX_ID##VERSION#-nanopi-r2s-sdcard.img {
+image sdcard.img {
 	hdimage {
 		partition-table-type = "gpt"
 	}
@@ -0,0 +1,743 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
+CONFIG_PREEMPT=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_PSI=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_KEXEC_FILE=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_SCHED_SMT=y
+CONFIG_NR_CPUS=8
+CONFIG_COMPAT=y
+CONFIG_RANDOMIZE_BASE=y
+# CONFIG_SUSPEND is not set
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_ACPI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_EINJ=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+# CONFIG_GCC_PLUGINS is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_KSM=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
+CONFIG_CMA_AREAS=20
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_XDP_SOCKETS=y
+CONFIG_XDP_SOCKETS_DIAG=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK_QUEUE=y
+CONFIG_NETFILTER_NETLINK_LOG=y
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_FTP=y
+CONFIG_NF_TABLES=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NFT_CT=m
+CONFIG_NFT_CONNLIMIT=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_TUNNEL=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_SOCKET=m
+CONFIG_NFT_OSF=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
+CONFIG_NFT_REJECT_NETDEV=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_NFT_BRIDGE_META=m
+CONFIG_NFT_BRIDGE_REJECT=m
+CONFIG_NF_CONNTRACK_BRIDGE=y
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_BRIDGE_MRP=y
+CONFIG_BRIDGE_CFM=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBS=m
+CONFIG_NET_SCH_ETF=m
+CONFIG_NET_SCH_TAPRIO=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_GACT=y
+CONFIG_NET_ACT_MIRRED=y
+CONFIG_NET_ACT_NAT=y
+CONFIG_NET_ACT_SKBEDIT=y
+CONFIG_NET_ACT_VLAN=y
+CONFIG_NET_ACT_BPF=y
+CONFIG_DCB=y
+CONFIG_NETLINK_DIAG=y
+CONFIG_MPLS=y
+CONFIG_NET_MPLS_GSO=y
+CONFIG_MPLS_ROUTING=m
+CONFIG_NET_PKTGEN=y
+CONFIG_BT=m
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIUART_QCA=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=y
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_PASID=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCIE_ROCKCHIP_HOST=m
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_VEXPRESS_CONFIG=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_DENALI_DT=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_OF_OVERLAY=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_NVME=m
+CONFIG_SRAM=y
+CONFIG_PCI_ENDPOINT_TEST=m
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_UACCE=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_MEGARAID_SAS=y
+CONFIG_SCSI_MPT3SAS=m
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_SATA_SIL24=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_MD=y
+# CONFIG_MD_BITMAP_FILE is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_INIT=y
+CONFIG_DM_VERITY=y
+CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_WIREGUARD=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
+CONFIG_VXLAN=m
+CONFIG_GENEVE=m
+CONFIG_BAREUDP=m
+CONFIG_MACSEC=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_NLMON=y
+CONFIG_NET_VRF=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_AGERE is not set
+# CONFIG_NET_VENDOR_ALACRITECH is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ASIX is not set
+CONFIG_ATL2=m
+CONFIG_ALX=m
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
+# CONFIG_NET_VENDOR_CAVIUM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_CORTINA is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EZCHIP is not set
+# CONFIG_NET_VENDOR_GOOGLE is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_HUAWEI is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_LITEX is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MICROSEMI is not set
+# CONFIG_NET_VENDOR_MICROSOFT is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NETERION is not set
+# CONFIG_NET_VENDOR_NETRONOME is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
+# CONFIG_NET_VENDOR_PENSANDO is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_RDC is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+CONFIG_R8169=m
+# CONFIG_NET_VENDOR_RENESAS is not set
+# CONFIG_NET_VENDOR_ROCKER is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_SOCIONEXT is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_DWMAC_GENERIC is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_LED_TRIGGER_PHY=y
+CONFIG_AX88796B_PHY=y
+CONFIG_DAVICOM_PHY=m
+CONFIG_REALTEK_PHY=y
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_AX88179_178A=m
+CONFIG_USB_NET_CDC_NCM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_NET_ZAURUS is not set
+CONFIG_ATH10K=m
+CONFIG_ATH10K_PCI=m
+CONFIG_WCN36XX=m
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+CONFIG_RTL8180=m
+CONFIG_RTL8187=m
+CONFIG_RTL_CARDS=m
+CONFIG_RTL8192CE=m
+CONFIG_RTL8192SE=m
+CONFIG_RTL8192DE=m
+CONFIG_RTL8723AE=m
+CONFIG_RTL8723BE=m
+CONFIG_RTL8188EE=m
+CONFIG_RTL8192EE=m
+CONFIG_RTL8821AE=m
+CONFIG_RTL8192CU=m
+CONFIG_RTL8XXXU=m
+CONFIG_RTL8XXXU_UNTESTED=y
+CONFIG_RTW88=m
+CONFIG_RTW88_8822BE=m
+CONFIG_RTW88_8822BS=m
+CONFIG_RTW88_8822BU=m
+CONFIG_RTW88_8822CE=m
+CONFIG_RTW88_8822CS=m
+CONFIG_RTW88_8822CU=m
+CONFIG_RTW88_8723DE=m
+CONFIG_RTW88_8723DS=m
+CONFIG_RTW88_8723DU=m
+CONFIG_RTW88_8821CE=m
+CONFIG_RTW88_8821CS=m
+CONFIG_RTW88_8821CU=m
+CONFIG_RTW88_DEBUG=y
+CONFIG_RTW89=m
+CONFIG_RTW89_8851BE=m
+CONFIG_RTW89_8852AE=m
+CONFIG_RTW89_8852BE=m
+CONFIG_RTW89_8852CE=m
+CONFIG_RTW89_DEBUGMSG=y
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_RK805_PWRKEY=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_RT288X=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL010=y
+CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_TCG_TPM=y
+CONFIG_TCG_TIS_I2C_INFINEON=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_GPIO=m
+CONFIG_I2C_RK3X=y
+CONFIG_I2C_SLAVE=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_SPI_DESIGNWARE=m
+CONFIG_SPI_DW_DMA=y
+CONFIG_SPI_DW_MMIO=m
+CONFIG_SPI_PL022=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPMI=y
+CONFIG_PPS=y
+# CONFIG_PTP_1588_CLOCK is not set
+CONFIG_DEBUG_PINCTRL=y
+CONFIG_PINCTRL_RK805=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_CHARGER_RK817=y
+CONFIG_SENSORS_ARM_SCMI=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_SYSFS=y
+CONFIG_SOFT_WATCHDOG=y
+CONFIG_MFD_RK8XX_I2C=y
+CONFIG_MFD_RK8XX_SPI=y
+# CONFIG_MFD_VEXPRESS_SYSREG is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_REGULATOR_NETLINK_EVENTS=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_VCTRL=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_ULPI_BUS=y
+CONFIG_USB_CONN_GPIO=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_ACM=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_CP210X=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_SNP_UDC_PLAT=y
+CONFIG_USB_BDC_UDC=y
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_SERIAL=y
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_OBEX=y
+CONFIG_USB_CONFIGFS_NCM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_ECM_SUBSET=y
+CONFIG_USB_CONFIGFS_RNDIS=y
+CONFIG_USB_CONFIGFS_EEM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_USB_CONFIGFS_F_FS=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_F_SDH30=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_HI3798CV200=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_CLASS_MULTICOLOR=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RK808=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL030=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_PL330_DMA=y
+CONFIG_SYNC_FILE=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_VHOST_MENU is not set
+CONFIG_STAGING=y
+CONFIG_RTLLIB=m
+CONFIG_RTL8192E=m
+CONFIG_RTL8723BS=m
+CONFIG_R8712U=m
+CONFIG_RTS5208=m
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_HWSPINLOCK=y
+# CONFIG_FSL_ERRATUM_A008585 is not set
+# CONFIG_HISILICON_ERRATUM_161010101 is not set
+# CONFIG_ARM64_ERRATUM_858921 is not set
+CONFIG_ARM_MHU=y
+CONFIG_PLATFORM_MHU=y
+CONFIG_IOMMU_IO_PGTABLE_ARMV7S=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_DTPM=m
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_DEVFREQ_GOV_USERSPACE=m
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_MEMORY=y
+CONFIG_IIO=y
+CONFIG_MAX9611=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_IIO_ST_LSM6DSX=m
+CONFIG_SENSORS_ISL29018=m
+CONFIG_VCNL4000=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
+CONFIG_MPL3115=m
+CONFIG_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RESET_GPIO=y
+CONFIG_PHY_ROCKCHIP_DPHY_RX0=m
+CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY=m
+CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=m
+CONFIG_PHY_ROCKCHIP_PCIE=m
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_ROCKCHIP_USB=m
+CONFIG_POWERCAP=y
+CONFIG_ARM_SCMI_POWERCAP=y
+CONFIG_DTPM=y
+CONFIG_ARM_SMMU_V3_PMU=m
+CONFIG_NVMEM_RMEM=m
+CONFIG_NVMEM_ROCKCHIP_EFUSE=m
+CONFIG_NVMEM_ROCKCHIP_OTP=m
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_MUX_MMIO=y
+CONFIG_INTERCONNECT=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_VIRTIO_FS=y
+CONFIG_OVERLAY_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_EXFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_CHILDREN=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_ZSTD=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_DH=m
+CONFIG_CRYPTO_CURVE25519=m
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=m
+CONFIG_CRYPTO_SHA3_ARM64=m
+CONFIG_CRYPTO_SM3_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_BS=m
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_DEV_ROCKCHIP=y
+CONFIG_CRYPTO_DEV_CCREE=m
+CONFIG_PACKING=y
+CONFIG_INDIRECT_PIO=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC8=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=32
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_MEMTEST=y
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
@@ -2,39 +2,8 @@
  "ieee802-dot1ab-lldp:lldp": {
    "infix-lldp:enabled": true
  },
-  "ietf-hardware:hardware": {
-    "component": [
-      {
-        "class": "infix-hardware:usb",
-        "name": "USB",
-        "state": {
-          "admin-state": "unlocked"
-        }
-      }
-    ]
-  },
  "ietf-interfaces:interfaces": {
    "interface": [
-      {
-        "name": "br0",
-        "type": "infix-if-type:bridge",
-        "ietf-ip:ipv4": {
-          "address": [
-            {
-              "ip": "192.168.0.1",
-              "prefix-length": 24
-            }
-          ]
-        }
-      },
-      {
-        "name": "lan",
-        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
-        "infix-interfaces:bridge-port": {
-          "bridge": "br0"
-        }
-      },
      {
        "name": "lo",
        "type": "infix-if-type:loopback",
@@ -56,38 +25,37 @@
        }
      },
      {
-        "name": "wan",
+        "name": "lan",
        "type": "infix-if-type:ethernet",
-        "ietf-ip:ipv6": {},
        "ietf-ip:ipv4": {
-          "infix-dhcp-client:dhcp": {
-            "option": [
-              {"id": "ntp-server"},
-              {"id": "broadcast"},
-              {"id": "domain"},
-              {"id": "hostname"},
-              {"id": "dns-server"},
-              {"id": "router"},
-              {"id": "netmask"}
-            ]
-          }
-        }
+          "address": [
+            {
+              "ip": "192.168.2.1",
+              "prefix-length": 24
+            }
+          ]
+        },
+        "ietf-ip:ipv6": {}
+      },
+      {
+        "name": "wan",
+        "type": "infix-if-type:ethernet"
      }
    ]
  },
  "ietf-keystore:keystore": {
-        "asymmetric-keys": {
-            "asymmetric-key": [
-                {
-                    "name": "genkey",
-                    "public-key-format": "infix-crypto-types:ssh-public-key-format",
-                    "public-key": "",
-                    "private-key-format": "infix-crypto-types:rsa-private-key-format",
-                    "cleartext-private-key": "",
-                    "certificates": {}
-                }
-            ]
+    "asymmetric-keys": {
+      "asymmetric-key": [
+        {
+          "name": "genkey",
+          "public-key-format": "ietf-crypto-types:ssh-public-key-format",
+          "public-key": "",
+          "private-key-format": "ietf-crypto-types:rsa-private-key-format",
+          "cleartext-private-key": "",
+          "certificates": {}
        }
+      ]
+    }
  },
  "ietf-netconf-acm:nacm": {
    "enable-nacm": true,
@@ -124,7 +92,7 @@
        ],
        "rule": [
          {
-            "name": "deny-password-read",
+            "name":  "deny-password-read",
            "module-name": "ietf-system",
            "path": "/ietf-system:system/authentication/user/password",
            "access-operations": "*",
@@ -163,14 +131,16 @@
    }
  },
  "ietf-system:system": {
-    "hostname": "r2s-%m",
+    "hostname": "r2s",
    "ntp": {
+      "enabled": true,
      "server": [
        {
-          "name": "default",
+          "name": "ntp.org",
          "udp": {
            "address": "pool.ntp.org"
-          }
+          },
+	  "iburst": true
        }
      ]
    },
@@ -183,91 +153,44 @@
        }
      ]
    },
-    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCBPUyDigJQgSW1tdXRhYmxlLkZyaWVuZGx5LlNlY3VyZQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQub3JnCictJy0tLSctJwo="
+    "infix-system:motd-banner": "Li0tLS0tLS0uCnwgIC4gLiAgfCBJbmZpeCAtLSBhIE5ldHdvcmsgT3BlcmF0aW5nIFN5c3RlbQp8LS4gdiAuLXwgaHR0cHM6Ly9rZXJuZWxraXQuZ2l0aHViLmlvCictJy0tLSctJwo="
  },
-  "infix-dhcp-server:dhcp-server": {
-    "option": [
+  "infix-dhcp-client:dhcp-client": {
+    "client-if": [
      {
-        "id": "ntp-server",
-        "address": "auto"
-      },
-      {
-        "id": "dns-server",
-        "address": "auto"
-      },
-      {
-        "id": "router",
-        "address": "auto"
-      }
-    ],
-    "subnet": [
-      {
-        "subnet": "192.168.0.0/24",
-        "pool": {
-          "start-address": "192.168.0.100",
-          "end-address": "192.168.0.250"
-        }
-      }
-    ]
-  },
-  "infix-firewall:firewall": {
-    "default": "wan",
-    "zone": [
-      {
-        "name": "lan",
-        "action": "accept",
-        "interface": [
-          "br0"
+        "if-name": "wan",
+        "option": [
+          {
+            "name": "broadcast"
+          },
+          {
+            "name": "dns"
+          },
+          {
+            "name": "domain"
+          },
+          {
+            "name": "hostname"
+          },
+          {
+            "name": "ntpsrv"
+          },
+          {
+            "name": "router"
+          },
+          {
+            "name": "subnet"
+          }
        ]
-      },
-      {
-        "name": "wan",
-        "action": "drop",
-        "interface": [
-          "wan"
-        ],
-        "service": [
-          "dhcpv6-client"
-        ]
-      }
-    ],
-    "policy": [
-      {
-        "name": "lan-to-wan",
-        "ingress": [
-          "lan"
-        ],
-        "egress": [
-          "wan"
-        ],
-        "masquerade": true
      }
    ]
  },
  "infix-meta:meta": {
-    "version": "1.6"
+    "infix-meta:version": "1.2"
  },
  "infix-services:mdns": {
    "enabled": true
  },
-  "infix-services:ssh": {
-    "enabled": true,
-    "hostkey": [
-      "genkey"
-    ],
-    "listen": [
-      {
-        "name": "ipv4",
-        "address": "0.0.0.0",
-        "port": 22
-      },
-      {
-        "name": "ipv6",
-        "address": "::",
-        "port": 22
-      }
-    ]
-  },
  "infix-services:web": {
    "enabled": true,
    "console": {
@@ -1,2 +1,2 @@
 ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/ff540000.ethernet/net/eth0", NAME="wan"
-ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/ff600000.usb/xhci-hcd.0.auto/usb5/5-1/5-1:1.0/net/*", NAME="lan"
+ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/ff600000.usb/xhci-hcd.0.auto/usb3/3-1/3-1:1.0/net/*", NAME="lan"
@@ -1,12 +0,0 @@
-config BR2_PACKAGE_RASPBERRYPI_RPI64
-	bool "Raspberry Pi 64-bit (RPi3 and later)"
-	depends on BR2_aarch64
-	select SDCARD_AUX
-	select BR2_PACKAGE_FEATURE_WIFI
-	select BR2_PACKAGE_BRCMFMAC_SDIO_FIRMWARE_RPI
-	select BR2_PACKAGE_BRCMFMAC_SDIO_FIRMWARE_RPI_WIFI
-
-	help
-	  Raspberry Pi 64-bit adds support for the Raspberry Pi family of
-	  of single-board computers (SBC), RPi 3B and later, including the
-	  Raspberry Pi 2W, which shares the same CPU core as RPi 3B.
@@ -1,13 +0,0 @@
-Copyright (c) 2025 The KernelKit Authors
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted, provided that the above
-copyright notice and this permission notice appear in all copies.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
@@ -1,59 +0,0 @@
-# Raspberry Pi 3B/4B
-
-## Support level
-
-Full support for base board but not any extension board on the GPIOs.
-Other RPi boards of the same generation may work as well, but may need
-some additional testing/work.  A few CM4 variants have been tested and
-seem to work as expected, but YMMV as always.
-
-### Touch screen
-
-The [Raspberry Pi touch display v1][0] is supported on the 4B, including
-touch functionality.  There are multiple touchscreens on the market for
-Raspberry Pi, but currently only the official first version with 800x480
-resolution is supported.  Infix supplies all drivers required to utilize
-the hardware, but you need to add the actual graphical application in a
-container.
-
-There are some important considerations you need to know about when
-using Infix for graphical applications.  The container needs access to
-`/dev/dri/` to be able to access the graphics card, it also need access
-to `/run/udev` to be able to find the input devices.
-
-Example of running Doom in Infix:
-
-```
-admin@example:/> configure
-admin@example:/config/> edit container doom
-admin@example:/config/container/doom/> set image docker://mattiaswal/alpine-doom:latest
-admin@example:/config/container/doom/> set privileged
-admin@example:/config/container/doom/> edit mount udev
-admin@example:/config/container/doom/mount/udev/> set type bind
-admin@example:/config/container/doom/mount/udev/> set target /run/udev/
-admin@example:/config/container/doom/mount/udev/> set source /run/udev/
-admin@example:/config/container/doom/mount/udev/> end
-admin@example:/config/container/doom/mount/xorg.conf/> set content U2VjdGlvbiAiT3V0cHV0Q2xhc3MiCiAgSWRlbnRpZmllciAidmM0IgogIE1hdGNoRHJpdmVyICJ2YzQiCiAgRHJpdmVyICJtb2Rlc2V0dGluZyIKICBPcHRpb24gIlByaW1hcnlHUFUiICJ0cnVlIgpFbmRTZWN0aW9uCg==
-admin@example:/config/container/doom/mount/xorg.conf/> set target /etc/X11/xorg.conf
-admin@example:/config/container/doom/mount/xorg.conf/> end
-admin@example:/config/container/doom/> edit volume var
-admin@example:/config/container/doom/volume/var/> set target /var
-admin@example:/config/container/doom/volume/var/> leave
-admin@example:/>
-```
-
-> [!NOTE]
-> The `xorg.conf` [content mount][2] is a nifty detail of Infix that
-> allows you to keep all the relevant configuration in a single file.
-> The deta is "simply" `base64` encoded, so you do not really need the
-> features of the Infix CLI, everything can be set up remotely [using
-> `curl`][3] if you like.
-
-### Pre-built images
-
-Pre-built SD card images are available here: [infix-rpi64-sdcard.img][sdcard]
-
-[0]: https://www.raspberrypi.com/products/raspberry-pi-touch-display/
-[1]: https://github.com/kernelkit/infix/releases/download/latest-boot/infix-rpi64-sdcard.img
-[2]: https://kernelkit.org/infix/latest/container/#content-mounts
-[3]: https://kernelkit.org/infix/latest/scripting-restconf/
@@ -1,35 +0,0 @@
-[all]
-arm_64bit=1
-
-arm_boost=1
-force_turbo=1
-
-kernel=u-boot.bin
-
-dtoverlay=rpi-env
-dtoverlay=infix-key
-
-disable_overscan=1
-
-enable_uart=1
-uart_2ndstage=1
-
-[pi3]
-start_file=start.elf
-fixup_file=fixup.dat
-
-dtoverlay=miniuart-bt
-
-gpu_mem=100
-
-[pi4]
-start_file=start4.elf
-fixup_file=fixup4.dat
-
-dtoverlay=vc4-kms-v3d-pi4
-lcd_rotate=2
-
-# Prevent console on DSI
-console=map:0
-
-gpu_mem=256
@@ -1,4 +0,0 @@
-dtb-y += broadcom/bcm2837-rpi-3-b.dtb broadcom/bcm2837-rpi-zero-2-w.dtb \
-	 broadcom/bcm2711-rpi-4-b.dtb broadcom/bcm2711-rpi-4-b-dsi.dtb  \
-	 broadcom/bcm2711-rpi-400.dtb broadcom/bcm2711-rpi-cm4-io.dtb   \
-	 broadcom/bcm2711-rpi-cm4.dtb
@@ -1,31 +0,0 @@
-#include <arm64/broadcom/bcm2711-rpi-4-b.dts>
-#include "infix.dtsi"
-
-/ {
-	/* Dynamic GPU reservation */
-	gpu-reserved {
-		size = <0x0 0x10000000>; /* 256MB */
-		alignment = <0x0 0x1000000>; /* 16MB aligned */
-		alloc-ranges = <0x0 0x10000000 0x1 0x00000000>; /* Allow anywhere in RAM */
-		no-map;
-	};
-
-	/* CMA pool */
-	cma-reserved {
-		compatible = "shared-dma-pool";
-		size = <0x0 0x10000000>; /* 256MB */
-		alignment = <0x0 0x1000000>; /* 16MB aligned */
-		linux,cma-default;
-		reusable;
-	};
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-
-&vc4 {
-	status = "okay";
-};
@@ -1,9 +0,0 @@
-#include <arm64/broadcom/bcm2711-rpi-400.dts>
-#include "infix.dtsi"
-
-/ {
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
@@ -1,9 +0,0 @@
-#include <arm64/broadcom/bcm2711-rpi-cm4-io.dts>
-#include "infix.dtsi"
-
-/ {
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
@@ -1,9 +0,0 @@
-#include <arm/broadcom/bcm2711-rpi-cm4.dtsi>
-#include "infix.dtsi"
-
-/ {
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
@@ -1,9 +0,0 @@
-#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
-#include "infix.dtsi"
-
-/ {
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
@@ -1,9 +0,0 @@
-#include <arm64/broadcom/bcm2837-rpi-zero-2-w.dts>
-#include "infix.dtsi"
-
-/ {
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-};
@@ -1,13 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Common Infix OS defaults
- */
-
-/ {
-	chosen {
-		infix {
-			/* Default admin user password: 'admin' */
-			factory-password-hash = "$5$mI/zpOAqZYKLC2WU$i7iPzZiIjOjrBF3NyftS9CCq8dfYwHwrmUK097Jca9A";
-		};
-	};
-};
@@ -1,78 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-#BOOT_FILES#
-		}
-	}
-
-	size = 32M
-}
-
-image cfg.ext4 {
-	empty = true
-	temporary = true
-	size = 16M
-
-	ext4 {
-		label = "cfg"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-	}
-}
-
-# The /var partition will be expanded automatically at first boot
-# to use the full size of the SD-card or eMMC media.
-image var.ext4 {
-	empty = true
-	temporary = true
-	size = 128M
-
-	ext4 {
-		label = "var"
-                use-mke2fs = true
-                features = "uninit_bg"
-                extraargs = "-m 0 -i 4096"
-	}
-}
-
-image #INFIX_ID##VERSION#-rpi64-sdcard.img {
-	hdimage {
-		partition-table-type = "hybrid"
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition aux {
-		partition-type-uuid = srv
-		image = "aux.ext4"
-	}
-
-	partition primary {
-		partition-type-uuid = linux
-		bootable = "true"
-		size = 250M
-		image = "rootfs.squashfs"
-	}
-
-	partition secondary {
-		partition-type-uuid = linux
-		bootable = "true"
-		size = 250M
-		image = "rootfs.squashfs"
-	}
-
-	partition cfg {
-		partition-type-uuid = srv
-		image = "cfg.ext4"
-	}
-
-	partition var {
-		partition-type-uuid = var
-		image = "var.ext4"
-	}
-}
@@ -1 +0,0 @@
-raspberrypi,4-model-b
@@ -1,10 +0,0 @@
-{
-    "eth0": {
-	"comment": "Primary Ethernet controller, native BCM2711",
-	"phy-detached-when-down": true
-    },
-    "eth1": {
-	"comment": "Second Ethernet controller on CM4 boards, attached over PCIe",
-	"phy-detached-when-down": true
-    }
-}
@@ -1,10 +0,0 @@
-{
-    "eth0": {
-	"comment": "Primary Ethernet controller, native on BCM2711, and smsc95xx on BCM2837",
-	"phy-detached-when-down": true
-    },
-    "@ethtool:driver=smsc95xx": {
-	"comment": "BCM2837 smsc95xx driver does not support disabling flow control",
-        "broken-flow-control": true
-    }
-}
@@ -1,11 +0,0 @@
-# CONFIG_MMC_PCI is not set
-CONFIG_OF_OVERLAY_LIST="rpi-env infix-key"
-# CONFIG_ENV_IS_IN_FAT is not set
-CONFIG_CMD_BMP=y
-CONFIG_CMD_RPI_DISPLAY=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP=y
-CONFIG_BMP_24BPP=y
-CONFIG_VIDEO=y
-CONFIG_VIDEO_BMP_RLE8=y
@@ -1,4 +1,4 @@
 label Infix (aarch64)
 	kernel /boot/Image
 	fdtdir /boot
-	append ${bootargs_root} ${bootargs_log} usbcore.authorized_default=2 -- ${bootargs_user}
+	append ${bootargs_root} ${bootargs_log} -- ${bootargs_user}
@@ -6,12 +6,6 @@ mountprefix=/var/lib/rauc/mnt
 bundle-formats=-plain
 max-bundle-download-size=1073741824

-[log.event-log]
-filename=/var/log/upgrade-json.log
-format=json-pretty
-max-size=1M
-max-files=5
-
 [keyring]
 directory=/etc/rauc/keys

@@ -0,0 +1,161 @@
+#!/bin/sh
+
+set -e
+
+# Build a map of phandle -> device tree node path for all PHY nodes
+build_phandle_map()
+{
+    for phy_node in /sys/firmware/devicetree/base/cp*/config-space*/mdio*/switch*/mdio/ethernet-phy@* \
+                    /sys/firmware/devicetree/base/cp*/config-space*/mdio*/ethernet-phy@*; do
+        [ -f "$phy_node/phandle" ] || continue
+
+        phandle=$(od -An -t x4 -N 4 "$phy_node/phandle" 2>/dev/null | tr -d ' ')
+        if [ -n "$phandle" ]; then
+            echo "$phandle:$phy_node"
+        fi
+    done
+}
+
+build_phy_map()
+{
+    phandle_map=$(build_phandle_map)
+
+    # Build a mapping of PHY of_node path -> interface name
+    for iface in /sys/class/net/*; do
+        [ -d "$iface" ] || continue
+
+        iface_name=$(basename "$iface")
+
+        # Try regular phydev approach first (for non-DSA interfaces)
+        if [ -L "$iface/phydev/of_node" ]; then
+            phy_of_node=$(readlink -f "$iface/phydev/of_node" 2>/dev/null)
+            if [ -n "$phy_of_node" ]; then
+                echo "$phy_of_node:$iface_name"
+                continue
+            fi
+        fi
+
+        # For DSA interfaces, resolve via of_node's phy-handle
+        if [ -L "$iface/of_node" ]; then
+            iface_of_node=$(readlink -f "$iface/of_node" 2>/dev/null)
+            [ -n "$iface_of_node" ] || continue
+
+            # Try to read phy-handle property (4-byte phandle)
+            if [ -f "$iface_of_node/phy-handle" ]; then
+                phy_phandle=$(od -An -t x4 -N 4 "$iface_of_node/phy-handle" 2>/dev/null | tr -d ' ')
+
+                if [ -n "$phy_phandle" ]; then
+                    # Look up the PHY node path from our phandle map
+                    phy_of_node=$(echo "$phandle_map" | grep "^$phy_phandle:" | cut -d: -f2)
+                    if [ -n "$phy_of_node" ]; then
+                        echo "$phy_of_node:$iface_name"
+                    fi
+                fi
+            fi
+        fi
+    done
+}
+
+zone_map()
+{
+    type="$1"
+
+    case "$type" in
+        ap-ic-thermal)
+            echo "Application processor interconnect"
+            ;;
+        ap-cpu[0-9]*-thermal)
+            cpu=${type#ap-cpu}
+            cpu=${cpu%-thermal}
+            echo "Application processor core $cpu"
+            ;;
+        cp[0-9]*-ic-thermal)
+            cp=${type%%-*}
+            cp=${cp#cp}
+            echo "Communication processor $cp interconnect"
+            ;;
+        *)
+            echo "$type"
+            ;;
+    esac
+}
+
+thermal_zones()
+{
+    echo "Thermal Zones"
+    echo "============="
+    echo
+
+    for zone in /sys/class/thermal/thermal_zone*; do
+        [ -d "$zone" ] || continue
+
+        name=$(basename "$zone")
+        type=$(cat "$zone/type" 2>/dev/null || echo "unknown")
+        data=$(cat "$zone/temp" 2>/dev/null)
+        desc=$(zone_map "$type")
+
+        if [ -n "$data" ] && [ "$data" != "N/A" ]; then
+            # Convert millidegrees to degrees Celsius
+            temp_c=$(awk "BEGIN {printf \"%.1f\", $data / 1000}")
+            printf "%-20s %8s°C    %s\n" "$name" "$temp_c" "$desc"
+        else
+            printf "%-20s %8s      %s\n" "$name" "N/A" "$desc"
+        fi
+    done
+    echo
+}
+
+hwmon()
+{
+    tmpfile=$(mktemp)
+
+    echo "Hardware Monitors"
+    echo "================="
+    echo
+
+    phy_map=$(build_phy_map)
+
+    for hwmon in /sys/class/hwmon/hwmon*; do
+        [ -d "$hwmon" ] || continue
+
+        name=$(basename "$hwmon")
+        data=$(cat "$hwmon/temp1_input" 2>/dev/null)
+
+        # Try to find the associated network interface
+        iface=
+        if [ -L "$hwmon/of_node" ]; then
+            hwmon_of_node=$(readlink -f "$hwmon/of_node" 2>/dev/null)
+            if [ -n "$hwmon_of_node" ]; then
+                iface=$(echo "$phy_map" | grep "^$hwmon_of_node:" | cut -d: -f2)
+            fi
+        fi
+
+        if [ -n "$iface" ]; then
+            description="Phy $iface temperature"
+        else
+            description="N/A"
+        fi
+
+        if [ -n "$data" ] && [ "$data" != "N/A" ]; then
+            # Convert millidegrees to degrees Celsius
+            temp_c=$(awk "BEGIN {printf \"%.1f\", $data / 1000}")
+            # Format: sortkey|hwmon|temp|description (sortkey for natural sort by interface)
+            printf "%s|%-20s %8s°C    %s\n" "$iface" "$name" "$temp_c" "$description" >> "$tmpfile"
+        else
+            printf "%s|%-20s %8s      %s\n" "$iface" "$name" "N/A" "$description" >> "$tmpfile"
+        fi
+    done
+
+    # Sort by interface name naturally (e2 before e10), with N/A entries at the end
+    # Then strip the sort key before displaying
+    sort -V -t'|' -k1,1 "$tmpfile" | cut -d'|' -f2-
+    rm -f "$tmpfile"
+    echo
+}
+
+[ -n "$1" ] || { echo "usage: $0 OUT-DIR"; exit 1; }
+work="$1"/system
+mkdir -p "${work}"
+
+thermal_zones >  "${work}"/temperature.txt
+hwmon         >> "${work}"/temperature.txt
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+set -e
+
+ecc_stat()
+{
+    local chan=
+    local base=
+
+    for chan in 0 1; do
+        base=$((0xf0020360 + 0x200 * chan))
+
+        echo "DRAM Channel $chan ECC Status"
+        echo -n "  Log config: "; devmem $((base + 0x0)) 32
+        echo -n "  1b errors:  "; devmem $((base + 0x4)) 32
+        echo -n "  Info 0:     "; devmem $((base + 0x8)) 32
+        echo -n "  Info 1:     "; devmem $((base + 0xc)) 32
+        echo
+    done
+}
+
+[ -n "$1" ] || { echo "usage: $0 OUT-DIR"; exit 1; }
+work="$1"/marvell-cn913x
+mkdir -p "${work}"
+
+ecc_stat >"${work}"/ecc-stat
@@ -1,2 +0,0 @@
-include $(BR2_EXTERNAL_INFIX_PATH)/board/ix-board.mk
-include $(sort $(wildcard $(BR2_EXTERNAL_INFIX_PATH)/board/*/*/*.mk))
@@ -94,9 +94,10 @@ If you see the following line printed one or more times, don't panic.

    LABEL=var: Can't lookup blockdev

-See the Customizing section above.  Silence the error by selecting one
-more writable partition (/var) in menuconfig for log files, container
-images, etc.  The size can also be adjusted there.
+See the Customizing section above.  To silence the error you need to
+create another writable partition for Infix to store logs, container
+images, etc.  Look for the 'var' keyword, you can adjust the size of
+the partition.


 Graphical Network Simulator 3 (GNS3)
@@ -104,11 +105,12 @@ Graphical Network Simulator 3 (GNS3)

 GNS3 is a very powerful front-end to Qemu which takes care of creating
 virtual links between network devices running in Qemu.  This README is
-all you need to get going, alongisde it is the appliance file (.gns3a)
-that reference image files in this directory needed to load into GNS3.
+only link to the material you need.  This directory holds the appliance
+file, .gns3a, that references image files also in this directory, that
+you need to load into GNS3.

-Necessary Ubuntu packages are available through the offical GNS3 PPA.
-If you don't know what a PPA is, read up on that first:
+The necessary extra packages are available through the offical PPA.  If
+you don't know what a PPA is, read up on that first:

 - https://launchpad.net/~gns3/+archive/ubuntu/ppa

@@ -120,8 +122,9 @@ There's a lot of tutorials and guides online, start here:
 About
 -----

-Infix is a free, Linux-based, immutable operating system, built around
+Infix is a free, Linux-based, immutable operating system built around
 Buildroot, and sysrepo.  A powerful mix that ease porting to different
 platforms, simplify long-term maintenance, and provide easy management
-using NETCONF, RESTCONF, or the built-in, command line interface (CLI)
+using NETCONF, RESTCONF, or the built-in command line interface (CLI)
 from a console or SSH login.
+
@@ -11,8 +11,7 @@ image aux.ext4 {
 	ext4 {
 		label = "aux"
 		use-mke2fs = true
-		features = "^metadata_csum,^metadata_csum_seed,uninit_bg"
-                extraargs = "-m 0 -i 4096"
+		features = "^metadata_csum,^metadata_csum_seed"
 	}
 }

@@ -1,8 +1,6 @@
-#!/usr/bin/env bash
-# shellcheck disable=SC1090,SC1091,SC3053
-
+#!/bin/sh
+# shellcheck disable=SC1090,SC1091
 common=$(dirname "$(readlink -f "$0")")
-. "$common/lib.sh"
 . "$BR2_CONFIG" 2>/dev/null
 . "$TARGET_DIR/usr/lib/os-release"

@@ -32,21 +30,27 @@ EOF
    # Ignore a few top-level oddballs not used by core Infix
    cmd="$cmd -x supported-algorithms"

-    ixmsg "Calling $cmd"
+    # Execute the command
+    echo "Calling: $cmd"
    $cmd
 }

-if [ -f "$TARGET_DIR/etc/rauc/system.conf" ]; then
-    sed -i "s/compatible=.*/compatible=$INFIX_COMPATIBLE/" "$TARGET_DIR/etc/rauc/system.conf"
-fi
-
 if [ -n "${ID_LIKE}" ]; then
    ID="${ID} ${ID_LIKE}"
 fi

+if [ -n "$INFIX_IMAGE_ID" ]; then
+    NAME="$INFIX_IMAGE_ID"
+else
+    NAME="$INFIX_ID"-$(echo "$BR2_ARCH" | tr _ - | sed 's/x86-64/x86_64/')
+fi
+
+if [ -f "$TARGET_DIR/etc/rauc/system.conf" ]; then
+    sed -i "s/compatible=.*/compatible=$INFIX_COMPATIBLE/" "$TARGET_DIR/etc/rauc/system.conf"
+fi
+
 # This is a symlink to /usr/lib/os-release, so we remove this to keep
 # original Buildroot information.
-ixmsg "Creating /etc/os-release"
 rm -f "$TARGET_DIR/etc/os-release"
 {
    echo "NAME=\"$INFIX_NAME\""
@@ -83,7 +87,6 @@ rm -f "$TARGET_DIR/etc/os-release"
 } > "$TARGET_DIR/etc/os-release"

 echo "$INFIX_TAGLINE $INFIX_VERSION -- $(date +"%b %e %H:%M %Z %Y")" > "$TARGET_DIR/etc/version"
-ixmsg "Creating /etc/version: $(cat "$TARGET_DIR/etc/version")"

 # In case of ambguities, this is what the image was built from
 cp "$BR2_CONFIG" "$TARGET_DIR/usr/share/infix/config"
@@ -98,9 +101,12 @@ fi
 # Drop Buildroot default pam_lastlog.so from login chain
 sed -i '/^[^#]*pam_lastlog.so/s/^/# /' "$TARGET_DIR/etc/pam.d/login"

-# Allow bash to be login shells, it is added automatically when selected
-# in menuyconfig, but not when BusyBox provides a symlink (for ash).
-# The /bin/{true,false} are old UNIX beart means of disabling a user.
+# Allow pdmenu (setup) and bash to be login shells, bash is added
+# automatically when selected in menuyconfig, but not when BusyBox
+# provides a symlink (for ash).  The /bin/{true,false} are old UNIX
+# beart means of disabling a user.
+grep -qsE '^/usr/bin/pdmenu$$' "$TARGET_DIR/etc/shells" \
+        || echo "/usr/bin/pdmenu" >> "$TARGET_DIR/etc/shells"
 grep -qsE '^/bin/bash$$' "$TARGET_DIR/etc/shells" \
        || echo "/bin/bash" >> "$TARGET_DIR/etc/shells"
 grep -qsE '^/bin/true$$' "$TARGET_DIR/etc/shells" \
@@ -108,6 +114,12 @@ grep -qsE '^/bin/true$$' "$TARGET_DIR/etc/shells" \
 grep -qsE '^/bin/false$$' "$TARGET_DIR/etc/shells" \
        || echo "/bin/false" >> "$TARGET_DIR/etc/shells"

+boards=$(${BR2_EXTERNAL_INFIX_PATH}/board/common/selected-boards.sh ${BR2_EXTERNAL_INFIX_PATH} ${O})
+
+for board in $boards; do
+	[ ! -f "${BR2_EXTERNAL_INFIX_PATH}/src/board/${board}/post-build.sh" ] && continue
+	${BR2_EXTERNAL_INFIX_PATH}/src/board/${board}/post-build.sh
+done
 # Allow clish (symlink to /usr/bin/klish) to be a login shell
 grep -qsE '^/bin/clish$$' "$TARGET_DIR/etc/shells" \
        || echo "/bin/clish" >> "$TARGET_DIR/etc/shells"
@@ -15,34 +15,18 @@ export PROMPT_COMMAND=prompt_command
 # update the values of LINES and COLUMNS.
 shopt -s checkwinsize

-# don't put duplicate lines or lines starting with space in the history.
-export HISTCONTROL=ignoreboth
-
-# append to the history file, don't overwrite it
-shopt -s histappend
-
-# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
-export HISTSIZE=1000
-export HISTFILESIZE=2000
-
-# case-insensitive filename completion
-bind "set completion-ignore-case on"
-
-# show all completions immediately instead of ringing bell
-bind "set show-all-if-ambiguous on"
-
 log()
 {
    local fn="/var/log/syslog"
    [ -n "$1" ] && fn="/var/log/$1"
-    less +G -r "$fn"
+    less +G "$fn"
 }

 follow()
 {
    local fn="/var/log/syslog"
    [ -n "$1" ] && fn="/var/log/$1"
-    less +F -r "$fn"
+    tail -F "$fn"
 }

 _logfile_completions()
@@ -1,8 +1,7 @@
 # Start a container instance (%i) and redirect logs to /log/container
-# Give podman enough time to properly shut down the container, kill:30,
-# which is also matched in the container script (podman default is 10!)
-# The pre:script, responsibe for fetching a remote image and calling on
-# 'podman load', must not have a timeout.
+# Give podman enough time to properly shut down the container, kill:30
+# The pre:script, which is responsibe for fetching a remote image, must
+# not have a timeout.  The cleanup should take no longer than a minute.
 sysv    log:prio:local1,tag:%i kill:30 pid:!/run/container:%i.pid \
-	pre:0,/usr/sbin/container cleanup:0,/usr/sbin/container   \
+	pre:0,/usr/sbin/container cleanup:60,/usr/sbin/container   \
 	[2345] <!> :%i container -n %i -- container %i
@@ -1,3 +0,0 @@
-service [2345] <!pid/syslogd> reload:'firewall-cmd -q --reload' \
-	firewalld --nofork --log-target syslog                  \
-	-- Firewall daemon
@@ -1,3 +0,0 @@
-service name:netopeer notify:none log env:/etc/default/confd \
-	[12345] <pid/confd> netopeer2-server -F -t $CONFD_TIMEOUT -v 1 \
-	-- NETCONF server
@@ -1,5 +1,5 @@
 set G_MESSAGES_DEBUG=nocolor
 service [2345] <service/dbus/running> \
-	env:-/etc/default/rauc  \
+	env:-/etc/default/rauc log:prio:user.notice \
 	rauc service $RAUC_ARGS -- Software update service

@@ -1,4 +1,4 @@
 # Use <pid/syslogd> as barrier for other system tasks and service that
 # rely on modules, firmware, and device nodes to be ready.
 service if:udevd nowarn env:-/etc/default/sysklogd <run/udevadm:post/success> \
-	[S0123456789] syslogd -8 -F $SYSLOGD_ARGS -- System log daemon
+	[S0123456789] syslogd -F $SYSLOGD_ARGS -- System log daemon
@@ -1 +0,0 @@
-../available/netconf.conf
@@ -15,9 +15,9 @@ cfgfs		/config		configfs	nofail,noauto		0	0
 # The chosen backing storage for the overlays placed on /cfg, /etc,
 # /home, /root, and /var, are determined dynamically by /usr/libexec/infix/mnt
 # depending on the available devices.
-mnttmp		/mnt/tmp	tmpfs	defaults					0	0
-LABEL=aux	/mnt/aux	ext2	noatime,nodiratime,noauto,errors=remount-ro	0	0
-LABEL=var	/mnt/var	ext4	noatime,nodiratime,noauto,commit=30,errors=remount-ro	0 0
-LABEL=cfg	/mnt/cfg	ext4	noatime,nodiratime,noauto,commit=30,errors=remount-ro	0 0
-hostfs		/mnt/host	9p	cache=none,msize=16384,noauto			0	0
-/usr/libexec/infix/mnt#	/cfg	helper	none						0	0
+mnttmp		/mnt/tmp	tmpfs		defaults			0	0
+LABEL=aux	/mnt/aux	auto		noatime,nodiratime,noauto	0	0
+LABEL=var	/mnt/var	auto		noatime,nodiratime,noauto	0	0
+LABEL=cfg	/mnt/cfg	auto		noatime,nodiratime,noauto	0	0
+hostfs		/mnt/host	9p		cache=none,msize=16384,noauto	0	0
+/usr/libexec/infix/mnt#	/cfg	helper		none				0	0
@@ -1,66 +0,0 @@
-# /etc/inputrc - global inputrc for libreadline
-
-# Be 8 bit clean.
-set input-meta on
-set output-meta on
-
-# To allow the use of 8bit-characters like the german umlauts, uncomment
-# the line below. However this makes the meta key not work as a meta key,
-# which is annoying to those which don't need to type in 8-bit characters.
-
-# set convert-meta off
-
-# try to enable the application keypad when it is called.  Some systems
-# need this to enable the arrow keys.
-# set enable-keypad on
-
-# see /usr/share/doc/bash/inputrc.arrows for other codes of arrow keys
-
-# do not bell on tab-completion
-# set bell-style none
-# set bell-style visible
-
-# some defaults / modifications for the emacs mode
-$if mode=emacs
-
-# allow the use of the Home/End keys
-"\e[1~": beginning-of-line
-"\e[4~": end-of-line
-
-# allow the use of the Delete/Insert keys
-"\e[3~": delete-char
-"\e[2~": quoted-insert
-
-# mappings for "page up" and "page down" to step to the beginning/end
-# of the history
-# "\e[5~": beginning-of-history
-# "\e[6~": end-of-history
-
-# alternate mappings for "page up" and "page down" to search the history
-"\e[5~": history-search-backward
-"\e[6~": history-search-forward
-
-# mappings for Ctrl-left-arrow and Ctrl-right-arrow for word moving
-"\e[1;5C": forward-word
-"\e[1;5D": backward-word
-"\e[5C": forward-word
-"\e[5D": backward-word
-"\e\e[C": forward-word
-"\e\e[D": backward-word
-
-$if term=rxvt
-"\e[7~": beginning-of-line
-"\e[8~": end-of-line
-"\eOc": forward-word
-"\eOd": backward-word
-$endif
-
-# for non RH/Debian xterm, can't hurt for RH/Debian xterm
-# "\eOH": beginning-of-line
-# "\eOF": end-of-line
-
-# for freebsd console
-# "\e[H": beginning-of-line
-# "\e[F": end-of-line
-
-$endif
@@ -0,0 +1,3 @@
+# Do not authorize usb ports before they have been checked in in the device-tree
+options usbcore authorized_default=0
+ 
@@ -1,6 +0,0 @@
-# Log firewall denied/rejected packet logs to dedicated file
-# https://www.cyberciti.biz/faq/enable-firewalld-logging-for-denied-packets-on-linux/
-:msg, contains, "_DROP"
-kern.*                  -/var/log/firewall.log
-:msg, contains, "_REJECT"
-kern.*                  -/var/log/firewall.log
@@ -90,9 +90,9 @@ reset-reason {

 # Monitors file descriptor leaks based on /proc/sys/fs/file-nr
 filenr {
-#    enabled = true
-    interval = 300
-    logmark  = false
+    enabled = true
+    interval = 3600
+    logmark  = true
    warning  = 0.9
    critical = 1.0
 #    script = "/path/to/alt-reboot-action.sh"
@@ -102,33 +102,42 @@ filenr {
 # The script is called with fsmon as the first argument and there
 # are two environment variables FSMON_NAME, for the monitored path,
 # and FSMON_TYPE indicating either 'blocks' or 'inodes'.
-#fsmon /var {
-#    enabled = true
-#    interval = 300
-#    logmark  = false
-#    warning  = 0.95
-#    critical = 1.0
-#    script = "/path/to/alt-reboot-action.sh"
-#}
-
-# Monitors load average based on sysinfo() from /proc/loadavg
-# The level is composed from the average of the 1 and 5 min marks.
-loadavg {
-#    enabled = true
-    interval = 300
-    logmark  = false
-    warning  = 1.0
-    critical = 2.0
+fsmon /var {
+    enabled = true
+    interval = 3600
+    logmark  = true
+    warning  = 0.95
+    critical = 1.0
 #    script = "/path/to/alt-reboot-action.sh"
 }

+fsmon /tmp {
+    enabled = true
+    interval = 3600
+    logmark  = true
+    warning  = 0.95
+    critical = 1.0
+#    script = "/path/to/alt-reboot-action.sh"
+}
+
+# Monitors load average based on sysinfo() from /proc/loadavg
+# The level is composed from the average of the 1 and 5 min marks.
+#loadavg {
+#    enabled = true
+#    interval = 300
+#    logmark  = true
+#    warning  = 1.0
+#    critical = 2.0
+#    script = "/path/to/alt-reboot-action.sh"
+#}
+
 # Monitors free RAM based on data from /proc/meminfo
 meminfo {
-#    enabled = true
-    interval = 300
-    logmark  = false
+    enabled = true
+    interval = 3600
+    logmark  = true
    warning  = 0.9
-    critical = 0.95
+    critical = 0.97
 #    script = "/path/to/alt-reboot-action.sh"
 }

@@ -5,11 +5,10 @@
 # -K :: exit immediately when an interrupt character (usually ^C) is typed
 # -R :: Almost raw control charachters, only ANSI color escape sequences and
 #       OSC 8 hyperlink sequences are output.  Allows veritcal scrolling
-# -r :: Causes "raw" control characters to be displayed, including unicode.
 # -X :: No termcap initialization and deinitialization set to the terminal.
 #       This is what leaves the contents of the output on screen.

 export LESS="-P %f (press h for help or q to quit)"
 export LANG=en_US.UTF-8

-less -rIKd -FX "$@"
+less -RIKd -FX "$@"
@@ -1,18 +1,11 @@
 #!/bin/sh
-opts="-n1"
-
-if [ "$1" = "-q" ]; then
-    opts="$opts -s"
-    shift
-fi
-
 Q=$@

 /bin/echo -n "$Q, are you sure (y/N)? "
-read $opts yorn
+read -n1 yorn
 echo

-if [ "x$yorn" != "xy" ] && [ "x$yorn" != "xY" ]; then
+if [ x$yorn != "xy" ] && [ x$yorn != "xY" ]; then
   echo "OK, aborting."
   exit 1
 fi
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Tobias WaldekranzandGitHub	eb7c031270	Merge pull request #1332 from kernelkit/kernel-v25.02.x Bump kernel and update ChangeLog for v25.08.2	2025-12-19 13:27:25 +01:00
Joachim Wiberg	1d23f73bfd	doc: update ChangeLog for v25.08.2 release Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-19 11:36:54 +01:00
ael-botandJoachim Wiberg	119b92f94e	Upgrade Linux kernel to 6.12.63 Backported from origin/main `a999a93e63` Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-19 11:36:54 +01:00
Tobias WaldekranzandGitHub	96fad208cb	Merge pull request #1328 from kernelkit/cand/v25.08.x Candidate backports for v25.08.2	2025-12-19 10:34:57 +01:00
Tobias WaldekranzandJoachim Wiberg	0a3879f521	kernel: Enable test_lockup module This will be us the ability to test a hardware watchdog's ability to trigger on different kinds of lockups.	2025-12-18 14:12:03 +01:00
Tobias WaldekranzandJoachim Wiberg	6f6bb412f9	aarch64: kernel: Enable SBSA watchdog Usable by all Server Base System Architecture (SBSA) compliant SoCs, e.g., CN9130.	2025-12-18 14:12:02 +01:00
Joachim Wiberg	b04bae1ad6	board/*/linux_defconfig: panic on lockups and hung tasks Turn on OOPS-to-panic, soft/hard lockup panic, hung-task panic, and extra workqueue watchdog reporting. This makes latent stalls visible instead of silently freezing, improving diagnosis of issues like the recent resource-pressure lockup. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:12:02 +01:00
Joachim Wiberg	73edf1bbd6	board/common: log disk/mem/filenr resource usage every hour Dec 8 15:22:44 ix-00-00-00 watchdogd[2599]: Memory usage: 195036 kB, cached: 69740 kB, total: 423628 kB Dec 8 15:22:44 ix-00-00-00 watchdogd[2599]: File system /var usage: blocks 4710/52564 inodes 80/65456 Dec 8 15:22:44 ix-00-00-00 watchdogd[2599]: File descriptor usage: 640/34603 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:12:01 +01:00
Joachim Wiberg	2557eb4900	confd: add support for toggling OSPF debug logs Backported from origin/main `7edc3c19f7` Fixes #1281 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:12:01 +01:00
Joachim Wiberg	f71722c111	bin: add system support data collection Backported from origin/main `5420fb01f2` Includes the latest DRAM ECC status, with/without sudo, and temperature. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:12:00 +01:00
Joachim Wiberg	5ea99680c8	bin: backport fixes to shell/cli copy command This is a backport of the following commits from origin/main: `3b24fab` `e6a04fb` `92e80b4` `ad96965` `3e03ece` `21256a8` `b7d91e4` `d26e311` `0977ab4` `f83fbc6` --- cli: fix 'copy FILE running-config' use-case When copying to the running datastore we cannot use sr_copy_config(), instead we must use sr_replace_config(). This fix covers both the case of 'copy startup-config running-config' and 'copy FILE running-config'. Fixes #1203 --- cli: add 'validate', or '-n', dry run to copy command This commit adds config file validation to the copy command, discussed in #373. Allowing users to test their config files before restoring a backup. The feature could also be used for the automatic rollback when downgrading to an earlier version of the OS. Fixes #373 --- cli: fix copy to missing startup-config file Fixes #981 --- cli: restrict copy and erase commands This is a follow-up to PR #717 where path traversal protection was discussed. A year later and it's clear that having a user-friendly copy tool in the shell is a good thing, but that we proably want to restrict what it can do when called from the CLI. A sanitize flag (-s) is added to control the behavior, when used in the shell without -s, both commands act like traditional UNIX tools and do assume . for relative paths, and allow ../, whereas when running from the CLI only /media/ is allowed and otherwise files are assumed to be in $HOME or /cfg --- cli: sanitize regular file to file copy The regular file-to-file copy, was missing calls to cfg_adjust(), this commit fixes that and adds some helpful comments for each use-case. Also, drop insecure mktemp() in favor of our own version which uses the basename of the remote source file. --- bin: add bash completion for copy command Add bash completion for the common datastores, like we already do in the CLI, and update the usage text accordingly. Also, make sure to install to /usr/bin, not /bin since we've now merged the hierarchies since a while back. --- bin: copy: Refactor copy() made some...creative...use of control flow that made it quite difficult to follow. Take a first priciples approach to simplify the logic. --- bin: copy: Always get startup from sysrepo This will make sure to apply NACM rules for all the data. It also makes it possible for a luser access a subset of the data, even if they to do not have read access to /cfg/startup-config.cfg. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:12:00 +01:00
Joachim Wiberg	55b038d999	.github: only set latest tag on .0 releases Prevent patch releases from stealing the "latest" tag from newer minor versions. Only vXX.YY and vXX.YY.0 releases should be marked as latest. Fixes #1187 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:11:59 +01:00
Joachim Wiberg	83b55ee4d8	Follw-up to `d7abe46`, use correct compatible string for override Actually disable iitod on Styx DCP-SC-28p to work around #670, this prohibits software control of LEDs, leaving the default HW control, which has proven more stable on this platform. Backported from origin/main `b0dce8a05e` Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-12-18 14:11:31 +01:00
Joachim WibergandGitHub	68e7167902	Merge pull request #1184 from kernelkit/releng Release prep for v25.08.1	2025-10-03 16:22:07 +02:00
Joachim Wiberg	25a26fe7c6	doc: update release notes for v25.08.1 [skip ci] Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 16:21:28 +02:00
Joachim Wiberg	6c8bd25cee	.github; only publish to latest release from main branch [skip ci] Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 16:21:27 +02:00
Joachim Wiberg	ea300137ef	test: relocate logic for creating test-report.pdf from workflow It should be possible to create test reports manually, so logically the GitHub workflow should call a make rule in test.mk Untested: branding, or any case where Infix is used as a BR2_EXTERNAL Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:58 +02:00
Joachim Wiberg	44e9c87376	test/infamy: silence schema download in restconf backend NETCONF backedn already silenced. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:58 +02:00
Joachim Wiberg	e708f21444	test/infamy: refactor Furl class to support list of needles Also, add some documentation to lower barrier of entry/use. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:58 +02:00
Joachim Wiberg	3508b8d0bb	test: update container test specs. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:57 +02:00
Joachim Wiberg	eec867bd5f	test: verify ospf neighbors in setup with non-ospf interface Extend OSPF basic with a regression test for issue #1169 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:57 +02:00
Joachim Wiberg	daa0bd81e8	board/common: ensure efi-part.vfat is saved in build tree Fixes #1132 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-10-03 15:03:56 +02:00
Joachim WibergandGitHub	4ccc70aeee	Merge pull request #1172 from kernelkit/v25.08.x-backports Backport fixes for v25.08.1 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 15:28:57 +02:00
Richard Alpe	923443b620	doc: update changelog for v25.08.1 Signed-off-by: Richard Alpe <richard@bit42.se>	2025-09-30 10:28:57 +02:00
Richard Alpe	9ad51c31bf	OSPF: skip interfaces without OSPF enabled Fix a bug where systems with OSPF enabled on some, but not all, interfaces would cause the OSPF iterator to fail when accessing iface['area'], which was missing. This caused the ospf_status.py tool to return {}, resulting in empty OSPF data in sysrepo. Fixes #1169 Expected neighbors not shown in sysrepocfg Signed-off-by: Richard Alpe <richard@bit42.se>	2025-09-30 10:21:10 +02:00
Joachim WibergandRichard Alpe	6272c9c46c	.github: prevent duplicate builds when ci:main label is added to PRs Add concurrency control to trigger workflow to cancel in-progress builds when new events (like adding ci:main label) occur on the same PR. This prevents resource waste from duplicate builds and handles the common workflow where developers add the ci:main label after PR creation. Fixes #1154	2025-09-30 10:21:09 +02:00
Joachim WibergandRichard Alpe	4750f96774	cli: fix 'show ospf' commands regression, introduced in `827dc098e` Fixes #1155 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 10:21:08 +02:00
Joachim WibergandRichard Alpe	81bc143883	board/common: set show-legacy wrapper as executable Fix #1150 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 10:21:07 +02:00
Joachim WibergandRichard Alpe	58b3fb30be	test/case/infix_services: refactor mdns-allow-deny Major refactor to redesign how listeners and traffic is started in parallel. Fixes #1130 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 10:21:06 +02:00
Joachim WibergandRichard Alpe	6dfc305f0b	test/case/infix_container: refactor container-environment Refactor test to use httpd container instead and return ENV with a CGI. Fixes #1131 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 10:21:06 +02:00
Mattias WalströmandRichard Alpe	8ca3d3a3ff	test: Add new sanity check tests One to verify it is the correct version on the duts and one that check that it is the correct bootorder.	2025-09-30 10:21:05 +02:00
Joachim Wiberg	7ae4de3a17	doc: prepare for v25.08.1 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>	2025-09-30 09:30:51 +02:00
				`@@ -1 +0,0 @@`
				`dtb-y += mediatek/mt7986a-bananapi-bpi-r3-sd.dtb`
				`@@ -1 +0,0 @@`
				`ACTION=="add", SUBSYSTEM=="net", DEVPATH=="/devices/platform/soc/15100000.ethernet/net/eth1", NAME="sfp1"`
				`@@ -1 +0,0 @@`
				`CONFIG_DEVICE_TREE_INCLUDES="infix-env.dtsi infix-key.dtsi mt7986-sd-env.dtsi"`