arm-trusted-firmware: cn9130: Specify basic DDR opts via build vars

2026-07-22 09:13:01 +02:00 · 2024-04-12 16:07:46 +02:00
3 changed files with 79 additions and 2 deletions
@@ -1,7 +1,8 @@
 From 4f0e44e9b494485dc63de3264aa99dad5def5f55 Mon Sep 17 00:00:00 2001
 From: Henrik Nordstrom <henrik.nordstrom@addiva.se>
 Date: Wed, 13 Sep 2023 22:45:00 +0200
-Subject: [PATCH 1/2] cn9130: Default DDR4 4GByte 16-bit/die ECC
+Subject: [PATCH 1/3] cn9130: Default DDR4 4GByte 16-bit/die ECC
+Organization: Addiva Elektronik

 Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
 ---
@@ -1,7 +1,8 @@
 From da31240645cdf7ae424727ac330fdb6f6b118691 Mon Sep 17 00:00:00 2001
 From: Tobias Waldekranz <tobias@waldekranz.com>
 Date: Mon, 16 Oct 2023 10:52:19 +0200
-Subject: [PATCH 2/2] marvell: Allow mv-ddr-marvell to be built from tarball
+Subject: [PATCH 2/3] marvell: Allow mv-ddr-marvell to be built from tarball
+Organization: Addiva Elektronik

 Build system relies on the mv-ddr-marvell being a valid GIT working
 directory, which is not the case when building from a tarball.
@@ -0,0 +1,75 @@
+From 27358f3101254dd08d85fbac2c614ef4d28e9984 Mon Sep 17 00:00:00 2001
+From: Tobias Waldekranz <tobias@waldekranz.com>
+Date: Fri, 12 Apr 2024 15:55:52 +0200
+Subject: [PATCH 3/3] cn9130: Specify basic DDR topology via build variables
+Organization: Addiva Elektronik
+
+- The bit width of each individual die
+- The capacity of each individual die
+
+Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
+---
+ plat/marvell/marvell.mk                       |  8 ++++++
+ .../octeontx/otx2/t91/t9130/board/dram_port.c | 28 +++++++++++++++++++
+ 2 files changed, 36 insertions(+)
+
+diff --git a/plat/marvell/marvell.mk b/plat/marvell/marvell.mk
+index b6a2b9995..b8066aed2 100644
+--- a/plat/marvell/marvell.mk
+++ b/plat/marvell/marvell.mk
+@@ -19,3 +19,11 @@ $(eval $(call add_define,PALLADIUM))
+ # Set board to work with DDR 32bit
+ DDR32				:= 0
+ $(eval $(call add_define,DDR32))
+
+# Default to 16b device width
+DDR_DEV_WIDTH			:= 16
+$(eval $(call add_define,DDR_DEV_WIDTH))
+
+# Default to 1GB dies
+DDR_DIE_CAP_GBITS		:= 8
+$(eval $(call add_define,DDR_DIE_CAP_GBITS))
+diff --git a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
+index 07753ea97..78246d272 100644
+--- a/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
+++ b/plat/marvell/octeontx/otx2/t91/t9130/board/dram_port.c
+@@ -46,8 +46,36 @@ struct mv_ddr_iface dram_iface_ap0 = {
+ 		      {0x1, 0x0, 0, 0},
+ 		      {0x1, 0x0, 0, 0} },
+ 		   SPEED_BIN_DDR_2400R,		/* speed_bin */
+#if (DDR_DEV_WIDTH == 4)
+		   MV_DDR_DEV_WIDTH_4BIT,	/* sdram device width */
+#elif (DDR_DEV_WIDTH == 8)
+		   MV_DDR_DEV_WIDTH_8BIT,	/* sdram device width */
+#elif (DDR_DEV_WIDTH == 16)
+ 		   MV_DDR_DEV_WIDTH_16BIT,	/* sdram device width */
+#elif (DDR_DEV_WIDTH == 32)
+		   MV_DDR_DEV_WIDTH_32BIT,	/* sdram device width */
+#else
+#error "UNKNOWN DEVICE WIDTH"
+#endif
+#if (DDR_DIE_CAP_GBITS == 1)
+		   MV_DDR_DIE_CAP_1GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 2)
+		   MV_DDR_DIE_CAP_2GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 4)
+		   MV_DDR_DIE_CAP_4GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 8)
+ 		   MV_DDR_DIE_CAP_8GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 12)
+		   MV_DDR_DIE_CAP_12GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 16)
+		   MV_DDR_DIE_CAP_16GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 24)
+		   MV_DDR_DIE_CAP_24GBIT,	/* die capacity */
+#elif (DDR_DIE_CAP_GBITS == 32)
+		   MV_DDR_DIE_CAP_32GBIT,	/* die capacity */
+#else
+#error "UNKNOWN DIE CAPACITY"
+#endif
+ 		   MV_DDR_FREQ_SAR,		/* frequency */
+ 		   0, 0,			/* cas_l, cas_wl */
+ 		   MV_DDR_TEMP_HIGH} },		/* temperature */
+-- 
+2.34.1
+