Add counters from Ethtool groups to the operational datastore. The
mapping from Linux / Ethtool to YANG is described in the included
document eth-counters.md.
Signed-off-by: Richard Alpe <richard@bit42.se>
Replaced with full build in GitHub Actions. No other use-cases for it,
and too much of a hassle to maintain, so remove.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A list of interfaces: x10 x9 x8 x7 x6 x5 x4 x1 x2 x3 should be sorted in
order with x10 last. Using the common 'sort -n' would generate: x1 x10
x2 ... so we use version sort. This way we can ensure that the order of
bridge ports is natural and what end users expect.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Operational experience shows that the current Infix Fail Secure mode,
introduced in ca9daef, does not work in practice.
The factory datastore in sysrepo is created at boot with the YANG models
and the factory-config file. When the factory-config file is generated
from older versions of these models, the resulting datastore may fail to
pass the validation and system will end up in an unrecoverable state.
Instead, both the factory-config and failure-config must be created at
every boot to match the YANG models in the active Linux image. This
ensures loading the YANG models will always work and the system can
proceed to attempt to load startup-config to the running datastore.
If loading startup-config fails we can fall back to failure-config,
which like factory-config, will then provide a way to log in an dianose
the system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
If the bootloader knows about a factory-reset or dev-mode button, use
them to allow stopping the boot process, and to signal the
factory-reset condition to infix.
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Without it, the offset generated will always be zero.
But over netconf it will still be correct, most likely
because due to how libyang handles the date-and-time type.
The issues seen in the regression tests looks related to files
missing from minimal defconfig.
Fixes#127.
Signed-off-by: Richard Alpe <richard@bit42.se>
DSA ports such as pX has "link" (parent) set to dsaY. We don't see it
that way from an networking perspective. In this commit we avoid
adding parent to the statd data structure if the linkinfo -> info_kind
is dsa. This means the ports shows up as regular interfaces, which is
what we want.
Signed-off-by: Richard Alpe <richard@bit42.se>
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
This patch adds the framework for reading ethtool statistics and
inserting it into the operational datastore.
The ethtool data we rely on is "group data" such as "eth-mac" or
"rmon".
This data can be displayed using:
ethtool --json -S e0 --all-groups
The "group data" is still missing for most common drivers, so testing
this will require a firmware which has support for it.
Signed-off-by: Richard Alpe <richard@bit42.se>
Regenerate if either factory-config.gen or failure-config.gen is missing.
This should not happen, but is better to check for the result rather than
the intermediate result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
To be able to run "resolvconf -u" at boot we need dnsmasq up and running
and startup-config having been loaded successfully. (No point when we
hare in fail secure mode.)
If this bugs out it can be pinpointed by an empty /etc/resolv.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds support for the two /etc/os-release variables:
- IMAGE_ID
- IMAGE_VERSION
The former is configurable, with fallback to name-arch, and the latter
is only set for relase builds. During releae builds the release will
be appended to the image name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Marvell mv88e6xxx switch driver currently used in active projects do
not support multicast router ports properly yet. Considering that Infix
do not yet have YANG support for configuring IGMP/MLD snooping, we have
decided to disable it in bridge setups by default.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We should only call 'error' in case loading failure-config fails, not if
loading startup-config fails. Unclear how this passed testing, must have
been a last minute change that got untested.
Found during integration in customer's br2-external.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Overzealous shellcheck application lead to gen-intefaces not creating a
bridge when GEN_IFACE_OPTS was uncommented in /etc/confdrc
Verified in customer br2-external.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
