If the bootloader knows about a factory-reset or dev-mode button, use
them to allow stopping the boot process, and to signal the
factory-reset condition to infix.
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
This adds support for the two /etc/os-release variables:
- IMAGE_ID
- IMAGE_VERSION
The former is configurable, with fallback to name-arch, and the latter
is only set for relase builds. During releae builds the release will
be appended to the image name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Create per-arch unique distribution file names
- Source .gns3a information from /etc/os-release
Instead of attempting to create unique file names by hard-coding an
'infix-' prefix and extracting the "board" or "arch" part from the
defconfig, let's use the branding information from /etc/os-release
along with $BR2_ARCH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This makes it possible for projects using Infix as a br2-external to
override lots of OS-specific strings and contact information that
previously was hard coded.
The generated /etc/os-release now takes most of its data from .config
Worth noting is the changes in VERSION and BUILD_ID fields. The former
will be INFIX_RELEASE, during release builds, and the latter is always
the output from `git descibe ...`, or rather GIT_VERSION. This variable
can be overloaded as well.
See the help text and the new doc/branding.md document for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The default arch and disk image filename needs to be generated
to be unique per, at least, each architecture build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to problems with using u-boot as loader¹ we decided to start the
system by calling the kernel image directly. The downside to that is
that, even though RAUC upgrades would work, the kernel would remain
the same.
Improvements to this are of course welcome.
________
¹) Must extract the built-in .dtb and merge with the Qemu .dtb at runtime
to be able to boot primary (or secondry) image.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling `load_cfg BR2_EXTERNAL_INFIX_PATH` from post-image.sh caused
warnings due to multiple hits in the .config file:
post-image.sh: 12: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
post-image.sh: 13: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
Let's grep for a "key.*=" instead of "key" to drop those warnings, while
still acting as a catch-all for partial matches.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As we may need to load firmware to the PHYs, we can't load those
modules until we have access to the rootfs. In order for that to work,
the MDIO driver must not be built-in, as that will cause the kernel to
bind devices with missing (built-in) drivers to bind to the genphy
driver.
Therefore, build everything as modules and let udev load it during
boot.
The template and scripts for generating per-device factory-config have
been spread out across the repo. This is an attempt to gather all the
pieces to a single location for better overview.
Parts of factory-config will be reused for the new fail secure mode, in
the file failure-config. The beginnings of which are in this commit.
Other changes:
- cfg-bootstrap and confd-bootstrap have been collapsed into one
- let gen-hostname + gen-interfaces save to /cfg instead of /etc,
we've moved the /etc directory to read-only storage in /usr/share
- delay start of bootstrap and sysrepo-plugind after syslogd barrier
- set 'norestart' when loading startup-confg and failure-config,
no point in retrying if that fails, just go to error immediately
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops sulogin from BusyBox, as well as the Finit replacement,
in the NETCONF builds. The classic builds retain the Finit sulogin.
Furthermore, the Finit rescue mode is disabled (which uses sulogin), so
in case of trouble at boot, e.g. missing fstab or failure to fsck, the
system will no longer go to sulogin but instead log error to console and
reboot.
NOTE: the bootloader still needs to be locked down, otherwise a user
could just as easily change kernel cmdline to 'shell=/bin/sh'
Misc. reshuffle and defaults updated are due to make foo-update-defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead, use the version from package/skeleton-init-finit, including the
ssh-hostkeys (previously ssh-genhostkeys) from the same package, because
it include extensive error handling and logging on failure.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Set the IP origin "random" for avahi IPv4LL addresses. The reason we
use random and not link-layer for link-local IPv4 addresses is the
fact that they are not based on link-layer info, such as IPv6 eui64
generated LL addresses.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine copy of the current version of avahi-autoipd.action.
This script will be modified by us in later commits.
Signed-off-by: Richard Alpe <richard@bit42.se>
This currently includes cli-pretty tests. It could be executed
separately to clarify test results in github actions. This commit
includes it in the main test execution. The most important thing is
that it's executed.
Signed-off-by: Richard Alpe <richard@bit42.se>
Flush addresses during shutdown and renewal with new address.
This is kind of a hack and needs further testing.
Signed-off-by: Richard Alpe <richard@bit42.se>
This fixes one bug in Infix, namely that dhcp removes all other
statically configured addresses. However it introduces a new one
where dhcp renewals with new ip addresses are added as "duplicates",
we fix this in a later commit in this patchset.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine version of default.script to our local board override.
The reason for this commit is to track changes we do to it.
Signed-off-by: Richard Alpe <richard@bit42.se>
This file is read by iproute2 and creates valid names for ip proto.
Such as "static" in:
ip addr add dev e0 192.168.1.1/24 proto static
Signed-off-by: Richard Alpe <richard@bit42.se>
This allows us to show empty values easier, while not affecting the
if statements.
This allows for a greater flexibility in which values are shown and
not. For example, we want to show empty columns for data that the
user adds/removes, such as IP addresses.
...
ipv4 addresses :
...
However, we don't want to show empty columns for information that
should never exist for a particular interface type.
Signed-off-by: Richard Alpe <richard@bit42.se>
The old version (bash) where slow and cluttered. This version is much
faster and easier to read / maintain.
Signed-off-by: Richard Alpe <richard@bit42.se>
The port marker is intended to be used as a hint to the
auto-factory-config generator, so that it can create a bridge for all
switch ports by default. Therefore, revert to only include ports that
devlink reports as "flavour physical".
If we want to test this functionality in QEMU, we can use Rocker, the
virtual switch, instead.
The old assumption was that only virtual links would have specific
"linkinfo" data. However, somewhere between 5.19 and 6.1, DSA ports
gained the ability to report its "conduit" interface via the
"linkinfo" attribute. That's great, but unfortunately it broke our
heuristic assumptions.
The new assumption is that only physical ports will report a
"parentbus" attribute. Let's see how long that will last :)
