If the bootloader knows about a factory-reset or dev-mode button, use
them to allow stopping the boot process, and to signal the
factory-reset condition to infix.
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Without it, the offset generated will always be zero.
But over netconf it will still be correct, most likely
because due to how libyang handles the date-and-time type.
The issues seen in the regression tests looks related to files
missing from minimal defconfig.
Fixes#127.
Signed-off-by: Richard Alpe <richard@bit42.se>
DSA ports such as pX has "link" (parent) set to dsaY. We don't see it
that way from an networking perspective. In this commit we avoid
adding parent to the statd data structure if the linkinfo -> info_kind
is dsa. This means the ports shows up as regular interfaces, which is
what we want.
Signed-off-by: Richard Alpe <richard@bit42.se>
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
This patch adds the framework for reading ethtool statistics and
inserting it into the operational datastore.
The ethtool data we rely on is "group data" such as "eth-mac" or
"rmon".
This data can be displayed using:
ethtool --json -S e0 --all-groups
The "group data" is still missing for most common drivers, so testing
this will require a firmware which has support for it.
Signed-off-by: Richard Alpe <richard@bit42.se>
Regenerate if either factory-config.gen or failure-config.gen is missing.
This should not happen, but is better to check for the result rather than
the intermediate result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
To be able to run "resolvconf -u" at boot we need dnsmasq up and running
and startup-config having been loaded successfully. (No point when we
hare in fail secure mode.)
If this bugs out it can be pinpointed by an empty /etc/resolv.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds support for the two /etc/os-release variables:
- IMAGE_ID
- IMAGE_VERSION
The former is configurable, with fallback to name-arch, and the latter
is only set for relase builds. During releae builds the release will
be appended to the image name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Marvell mv88e6xxx switch driver currently used in active projects do
not support multicast router ports properly yet. Considering that Infix
do not yet have YANG support for configuring IGMP/MLD snooping, we have
decided to disable it in bridge setups by default.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We should only call 'error' in case loading failure-config fails, not if
loading startup-config fails. Unclear how this passed testing, must have
been a last minute change that got untested.
Found during integration in customer's br2-external.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Overzealous shellcheck application lead to gen-intefaces not creating a
bridge when GEN_IFACE_OPTS was uncommented in /etc/confdrc
Verified in customer br2-external.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Create per-arch unique distribution file names
- Source .gns3a information from /etc/os-release
Instead of attempting to create unique file names by hard-coding an
'infix-' prefix and extracting the "board" or "arch" part from the
defconfig, let's use the branding information from /etc/os-release
along with $BR2_ARCH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This makes it possible for projects using Infix as a br2-external to
override lots of OS-specific strings and contact information that
previously was hard coded.
The generated /etc/os-release now takes most of its data from .config
Worth noting is the changes in VERSION and BUILD_ID fields. The former
will be INFIX_RELEASE, during release builds, and the latter is always
the output from `git descibe ...`, or rather GIT_VERSION. This variable
can be overloaded as well.
See the help text and the new doc/branding.md document for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The default arch and disk image filename needs to be generated
to be unique per, at least, each architecture build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to problems with using u-boot as loader¹ we decided to start the
system by calling the kernel image directly. The downside to that is
that, even though RAUC upgrades would work, the kernel would remain
the same.
Improvements to this are of course welcome.
________
¹) Must extract the built-in .dtb and merge with the Qemu .dtb at runtime
to be able to boot primary (or secondry) image.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling `load_cfg BR2_EXTERNAL_INFIX_PATH` from post-image.sh caused
warnings due to multiple hits in the .config file:
post-image.sh: 12: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
post-image.sh: 13: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
Let's grep for a "key.*=" instead of "key" to drop those warnings, while
still acting as a catch-all for partial matches.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Fixes to IPv6 address origin (type 'random' rather than 'other')
now reflected in documentation.
Also using 'admin' instead of 'root' user in examples.
