To be able to run "resolvconf -u" at boot we need dnsmasq up and running
and startup-config having been loaded successfully. (No point when we
hare in fail secure mode.)
If this bugs out it can be pinpointed by an empty /etc/resolv.conf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds support for the two /etc/os-release variables:
- IMAGE_ID
- IMAGE_VERSION
The former is configurable, with fallback to name-arch, and the latter
is only set for relase builds. During releae builds the release will
be appended to the image name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Marvell mv88e6xxx switch driver currently used in active projects do
not support multicast router ports properly yet. Considering that Infix
do not yet have YANG support for configuring IGMP/MLD snooping, we have
decided to disable it in bridge setups by default.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We should only call 'error' in case loading failure-config fails, not if
loading startup-config fails. Unclear how this passed testing, must have
been a last minute change that got untested.
Found during integration in customer's br2-external.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Overzealous shellcheck application lead to gen-intefaces not creating a
bridge when GEN_IFACE_OPTS was uncommented in /etc/confdrc
Verified in customer br2-external.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Create per-arch unique distribution file names
- Source .gns3a information from /etc/os-release
Instead of attempting to create unique file names by hard-coding an
'infix-' prefix and extracting the "board" or "arch" part from the
defconfig, let's use the branding information from /etc/os-release
along with $BR2_ARCH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This makes it possible for projects using Infix as a br2-external to
override lots of OS-specific strings and contact information that
previously was hard coded.
The generated /etc/os-release now takes most of its data from .config
Worth noting is the changes in VERSION and BUILD_ID fields. The former
will be INFIX_RELEASE, during release builds, and the latter is always
the output from `git descibe ...`, or rather GIT_VERSION. This variable
can be overloaded as well.
See the help text and the new doc/branding.md document for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The default arch and disk image filename needs to be generated
to be unique per, at least, each architecture build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to problems with using u-boot as loader¹ we decided to start the
system by calling the kernel image directly. The downside to that is
that, even though RAUC upgrades would work, the kernel would remain
the same.
Improvements to this are of course welcome.
________
¹) Must extract the built-in .dtb and merge with the Qemu .dtb at runtime
to be able to boot primary (or secondry) image.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling `load_cfg BR2_EXTERNAL_INFIX_PATH` from post-image.sh caused
warnings due to multiple hits in the .config file:
post-image.sh: 12: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
post-image.sh: 13: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
Let's grep for a "key.*=" instead of "key" to drop those warnings, while
still acting as a catch-all for partial matches.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Fixes to IPv6 address origin (type 'random' rather than 'other')
now reflected in documentation.
Also using 'admin' instead of 'root' user in examples.
As we may need to load firmware to the PHYs, we can't load those
modules until we have access to the rootfs. In order for that to work,
the MDIO driver must not be built-in, as that will cause the kernel to
bind devices with missing (built-in) drivers to bind to the genphy
driver.
Therefore, build everything as modules and let udev load it during
boot.
In order get the ONIE EEPROM support and some mv88e6xxx related fixes,
move to 6.5.6, with the intention of upgrading again, to the next
longterm kernel, as soon as one becomes available.
Also, import patches from kkit-linux-6.5.y.
Everything else is named confd, even syslog messages are logged as
confd, and we've talked about not using sysrepo-plugind one day, so
let's prepare for a world where everthing is like that.
Also, and even more importantly, fix the sysrepo-plugind condition.
We cannot use <pid/syslogd>, because it can be restarted and thus
consequently Finit will stop sysrepo-plugind. This first caused a
bit of head scratching because it cause a lot of very odd errors in
the execution of sysrepo-plugind, transactions being abruptly aborted
for instace.
Whatt we can do, however, is use a static condition, which Finit has
support for since a few releases now. We want to guard the start of
our sysrepo-plugind service behind YANG /usr/libexec/confd/bootstrap.
So we can use <run/bootstrap/success>. In case the bootstrap fails,
we catch that in the row before using if:<run/bootstrap/failure> to
trigger the /usr/libexec/confd/error script (described previously).
The other run/task/services can be guarded behind <pid/confd> and now
everything suddenly makes sense.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- New script 'error' that can be overridden by a br2-external
- Call 'error' if YANG model bootstap or factory-config.gen fails
- Call 'error' if loading startup-config or failure-config fails
The 'error' script calls syslog¹ to log the error messge:
The device has reached an unrecoverable error, please RMA.
____
¹ to get a timestamp log message, and send remote in case a
br2-external has somehow hard-coded network for remote syslog
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This rather huge change is a refactor of the factory-config generataion to add
support for also generating a failure-config.
The confd bootstrap script has been given an rc file. This both eases manual
testing, when modifying the script(s), and also makes it easier to override
from a br2-external. Infix default is router/end-device, but a br2-external
may be a switch firmware and want to default to all ports in a bridge.
The generated failure-config creates a fail-safe "do no harm" config to boot
with in case startup-config for some reason is broken or cannot be applied,
e.g., bug in confd. Meaning, for both the router and switch use-cases the
device will start up with all interfaces isolated¹, with an IPv6 SLAAC (EUI64)
address per interface.
Services enabled in this fail-safe mode are: LLDP, mDNS/SD, SSH, and NETCONF.
All to facilitate diagnostics, troubleshooting and device recovery.
Other noteworthy changes include:
- rename factory/failure directories again -> factory.d/failure.d. Use
same naming as we do on target for directories holding generated files
- The bootstrap script no longer regenerates /cfg/factory.d on each boot
- The bootstrap script copies all static templates to /cfg/factory.d in
case a newer image changes the contents of them. For troubleshooting
- Support for overriding the 20-interfaces.json generation by br2-external
- Support for additional 30-config.json (ovrride/extend) by br2-external
- Expand gen-interfaces to support bridge use-case.
_____
¹ For a switch this means "no switchport", i.e., no switching between ports
otherwise connected to a switchcore (or bridge) in startup-config.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The template and scripts for generating per-device factory-config have
been spread out across the repo. This is an attempt to gather all the
pieces to a single location for better overview.
Parts of factory-config will be reused for the new fail secure mode, in
the file failure-config. The beginnings of which are in this commit.
Other changes:
- cfg-bootstrap and confd-bootstrap have been collapsed into one
- let gen-hostname + gen-interfaces save to /cfg instead of /etc,
we've moved the /etc directory to read-only storage in /usr/share
- delay start of bootstrap and sysrepo-plugind after syslogd barrier
- set 'norestart' when loading startup-confg and failure-config,
no point in retrying if that fails, just go to error immediately
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The sysklogd and BusyBox syslogd can not run at the same time. Since they
provide the same service we standardize on them providing <pid/syslogd>.
Also, ensure syslogd does not start until the fifth udevadm has completed.
This creates a barrier preventing other run/task/services from starting
too early. Thus guaranteeing a proper boot order.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit fixes a regression introduced in 15572e9e where /bin/bash
was unintentionally set as the defalt /bin/sh in the system. This cause
several warnings and errors when a Bash-based /bin/sh tries to sources
/etc/profile because $SHELL identifies it as /bin/bash.
The ietf-system.yang model, with the infix-system.yang extensions,
declare a per-user SHELL that allow /bin/clish, /bin/bash, /bin/sh
and /bin/false. There should be a clear distinction between them.
This change also helps us keep bashisms away. If a script needs
Bash features, declare: #!/usr/bin/env bash
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops sulogin from BusyBox, as well as the Finit replacement,
in the NETCONF builds. The classic builds retain the Finit sulogin.
Furthermore, the Finit rescue mode is disabled (which uses sulogin), so
in case of trouble at boot, e.g. missing fstab or failure to fsck, the
system will no longer go to sulogin but instead log error to console and
reboot.
NOTE: the bootloader still needs to be locked down, otherwise a user
could just as easily change kernel cmdline to 'shell=/bin/sh'
Misc. reshuffle and defaults updated are due to make foo-update-defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- with conditional execution support
- fixes to udevd and udevadm calls in renamed 10-hotplug.conf
- support for overriding internal services, e.g. dbus, keventd
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead, use the version from package/skeleton-init-finit, including the
ssh-hostkeys (previously ssh-genhostkeys) from the same package, because
it include extensive error handling and logging on failure.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The new confd-load.sh script handles bootstrapping Infix using startup-config
or a failure-config (see later commits) on error.
When used with the -b (bootstrap) option, and failure to load the give file,
the script sets a Finit condition and goes to runlevel 9. The condition can
be used to trigger loading of a failure-config to go to a Fail Secure mode.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Only create a default startup-config from factory-config if one is missing.
Do not load an existing startup-config, that is handled by a later step in
the boot process, which needs to be monitored (and displayed) separately to
fail over to a Fail Secure mode on error.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Changes to the system concerning access rights, like users, should always
be logged, in particular when creating new users or failure to create or
modify their properties.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
