Basic DHCPv6 support as a per-interface ipv6 setting, not in line with
the IETF YANG model, which has this as a root container.
Note, this also fixes DHCPv4 option inference after the relocation of
/dhcp-client to /interfaces, in 764bd8e.
Fixes#1110
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We use the infinitive, or basic form, in configure context, as do most
other network vendors, so let's do the same in admin exec context.
Also, drop the 'name' qualifier, it is not needed in configure context
so we shouldn't have to use it in admin exec either.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In an effort to consolidate and use familiar command paths for our most
common commands, let's follow suite with Cisco, vtysh, et al.
Add deprecation warning to legacy 'show route [ip|ipv6]' command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since we just un-deviated this node to be able to create operational
data for ospf interfaces, we should also allow users to set it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Collect more data from FRR to the OSPF and BFD operational datastore.
Refactor CLI commands to use the YANG datastore instead of vtysh.
Additionally, the BFD command(s) have been moved to the top level of
admin-exec, which is where vtysh has them.
Finally, preparing for future OSPFv3 support, all commands have been
given a new context under 'show ip ospf'. Deprecation warnings have
been added to the existing 'show ospf' commands.
Also, for consistency, all commands names in plural have been changed to
their singular form: routes -> route, interfaes -> interface, etc. This
is what vtysh, Cisco, and others do as well.
Fixes#1190
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Silently drop any area-type setting for ospf backbone in a migrate
script to prevent any field issues after upgrading to this fix.
Fixes#1247
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adds support for configuring TTL, ToS/DSCP, and Path MTU Discovery
on GRE and VXLAN tunnels. TTL defaults to 64 instead of inherit to
prevent issues with routing protocols like OSPF that use TTL=1.
Refactors tunnel YANG models by merging local-remote into a unified
tunnel-common grouping for cleaner organization.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The callback refactoring forgot to call ietf_interfaces_cand_init(),
breaking inference of interface types and DHCP client options.
Also fixes UPDATE event handling for ietf-keystore and infix-meta.
Fixes#1244
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Neither the IPv6 autonconf container, nor the recently moved DHCP client
container have an 'enabled' flag.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Please note, this change drops not only the global enabled flag, but also the
per-interface enabled flag, converting it to a presence container. The name
of the container is also shortened from dhcp-client -> dhcp. A pattern that
expected to be reused also for the DHCPv6 client.
Fixes#1109
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This fixes the annoying libyang warning after commit da29771.
confd[3375]: libyang[0]: Invalid argument ctx_node (lyd_find_xpath()).
This happens when the diff is used in the wrong event when it is NULL.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Wrap wpa_cli operations in try-except blocks to ensure WiFi errors don't
cause sysrepocfg to fail. Interface queries now return data for working
interfaces even when WiFi has issues.
Fixes:
admin@rpi-79-41-1d:/> show interfaces
Error running sysrepocfg: Command '['sysrepocfg', '-f', 'json', '-X', '-d', 'operational', '-x', '/ietf-interfaces:interfaces']' returned non-zero exit status 1.
No interface data retrieved.
admin@rpi-79-41-1d:/>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add new interface quirk to allow skipping disabling of flow control on
all RPi 3B/4B devices that have the smsc95xx driver.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates all BSP support files into the Buildroot standard
board/ directory. The concept of selectable boards in menuconfig remains
as-is but now lives in board/ instead.
Drop support for board-specific post-build.sh scripts, not needed atm. and
we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files
instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the additional support for RPi3, including Zero 2W, this commit renames
all relevant directories and Config.In options to match.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For more advanced hardware with multiple sensor types per device
(e.g., SFP modules with temperature, voltage, current, and power
sensors), use the YANG parent/child relationship to group related
sensors together for better presentation.
Changes:
- Remove parent/parent-rel-pos deviations from infix-hardware.yang
- Create parent components (class: module) for multi-sensor devices
- Add parent references to child sensor components
- Add human-readable descriptions from hwmon labels
- Extend hwmon discovery to support voltage, current, and power
- Normalize sensor names: strip vendor prefixes (mt7915_phy0 -> phy0)
- Remove redundant TYPE column, clarify units (V -> VDC, add spaces)
- Simplify child sensor display by stripping parent prefix
- Fix "show system" to only show CPU temperature and fan speed
Example output from "show hardware":
NAME VALUE STATUS
===================================================
sfp1:
Rx Power 0.000 W ok
Tx Power 0.001 W ok
Vcc 3.35 VDC ok
Bias 0.006 A ok
Temperature 30.3 °C ok
sfp2:
Rx Power 0.000 W ok
Tx Power 0.001 W ok
Vcc 3.34 VDC ok
Bias 0.006 A ok
Temperature 32.0 °C ok
cpu 42.8 °C ok
phy0 47.0 °C ok
phy1 53.0 °C ok
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds resource usage: memory, loadavg, and filesystem usage
by augmenting ietf-system:/system-state.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Remove class deviation to allow iana-hardware:sensor
- Populate sensor operational data from /sys/class/thermal
- Extend 'show hardware'
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Usually, when upgrading a system, you want to reboot it so the upgrade
takes effect. This commit adds a 'reboot' option/flag, alongside the
'force' option, to facilitate this.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit refactors USB port probing to:
- Eliminate duplicates: previously, 'authorized' and 'authorized_default'
were listed as separate USB port entries (confusing). Now each USB
port is represented once, with the path pointing to the USB device
directory, confd appends the appropriate attribute file as needed
- Add support for Raspberry Pi 4B and CM4 USB port(s) using a generic
discovery function that scans /sys/bus/usb/devices for USB root hubs.
This should work seamlessly across all platforms
- For backwards compatibility and better UX:
- Single USB port systems: Named "USB" (no number)
- Multi-port systems: Named "USB1", "USB2", etc.
- Device tree-based discovery is tried first (for boards like Alder with
explicit DT USB port definitions), with fallback to generic discovery
for boards without DT
Fixes: #315
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds support for the Raspberry Pi CM4 based mini DFRobot IoT
Router board, SKU:DFR0767. It comes with an additional RTL8111 PCIe NIC
hence the addidtional kernel module and firmware. The latter fixes:
r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168h-2.fw (-2)
Please note, the change in BCMGENET from module to built-in is to ensure
it is probed before any PCIe NIC, both this board and the CM4-based NVME
NAS base board enumerate the built-in MAC as eth0.
Also, unlike the RPi 3B/4B, it is not a given fact that a CM4 based board
comes with WiFi onboard, and since most compute module setups are DYI, we
take the easy way out and leave it as an exercise to the user to add WiFi
interface to the config.
https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The BCM2837 core is used not just in the RPi 3B but also in the Zero 2W,
both device trees have been added to the board config.
The BCM2711 support has been extended to include RPi 400 and CM4 I/O.
To support the BCM2837 family more firmware options habe been enabled,
since the RPi3 does not have bootcode.bin flashed in the SoC. The SD
card image now uses a hybrid GPT/MBR format so the RPi3 bootcode.bin
can read all files from the first VFAT partition.
The default device tree for Linux is now chosen by the U-Boot probe and
the only exception is the "laundry room" detector that looks for a RPi4
with a 7" touch screen, which then selects the DSI enabled RPi4 variant.
This is enough to properly load an RPi 3B and a CM4 based router board.
The BCM2837 does not have PCI/PCIe or a built-in MAC so it relies on the
USB to Ethernet LAN78xx which does not support disabling pause frames.
I have opted for checking for EOPNOTSUPP instead of adding yet another
quirk, because it is likely to be a common limitation of more drivers
and chipsets, and this code is best-effort anyway.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Sysrepo lack the functionallity for if change in model A also
should demand actions of model B. Previous we have handled this by
having callbacks for keystore changes in for example infix-services
to be able to reconfigure SSH on asymmetric key changes.
This commit instead add a pass where dependencies are found and added
to the diff.
Sysrepo only care about model changes, but we want the system
configuration. Therefore add a common callback for all modules
and handle dependencies between the modules, if someone should be
run before another for example.
This will make sure to apply NACM rules for all the data. It also
makes it possible for a luser access a subset of the data, even if
they to do not have read access to /cfg/startup-config.cfg.
Bridge ports should not have IP addresses configured. The IP address
should be configured on the bridge interface itself, not its member ports.
Add YANG must expression to enforce this rule at configuration time.
Fixes#1122
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A valid DHCP server setup for a subnet is one of pool and/or at least one
static host entry/lease. If pool is enabled the pool must have a start
and an end address.
To allow setting up a DHCP server with no pool and at least one static host
entry/lease, we make the pool a presence container, otherwise the pool will
always be set and trigger the below inference.
When an interactive CLI/Web user enables the address pool we infer a default
range .100-.250, but only for /24, C-class networks. This is what most users
know and expect.
The YANG model now validates that:
- If an address pool is created, both start-address and end-address must be set
- Each subnet must have either a pool or at least one static host entry
- The pool container is now a presence container, so "no pool" fully deletes it
Fixes#1121
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Multiple services can have PID 0 when stopped/done, making PID
unsuitable as a unique key. There could also be multiple services with
the same name (I would assume?).
Signed-off-by: Richard Alpe <richard@bit42.se>
Joachim Wiberg