This is most noticeable in interface context
admin@infix-00-00-00:/config/interface/e1/> set type wifi
admin@infix-00-00-00:/config/interface/e1/> set
bind-ni-name bridge-port container-network custom-phys-address description enabled ethernet
where you previously got *all* containers for all interface-types.
It changes the datastore to running when init nacm, this
make klish misbehave:
Klish open candidate -> init nacm -> now all changes are made in running
Schema node "type" for parent "/ietf-routing:routing/control-plane-protocols/control-plane-protocol/ietf-ospf:ospf" not found;
in expr "derived-from-or-self(../../rt:type"
The cfg.ext4 disk image was created but not formatted because mkfs.ext4
wasn't found. As sbin is not in PATH for an unprivileged user in
Debian.
This caused the VM boot to fail with "No persistent storage found for /cfg".
Signed-off-by: Richard Alpe <richard@bit42.se>
Attempt to fix permissions with sudo before falling back to $HOME,
and verify directory is actually writable before proceeding.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Actually disable iitod on Styx DCP-SC-28p to work around #670, this
prohibits software control of LEDs, leaving the default HW control,
which has proven more stable on this platform.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Remove fixed lengths from Column class
- Add dynamic width calculation to SimpleTable
- Update service table to use new batched printing
Signed-off-by: Richard Alpe <richard@bit42.se>
Replace manual f-string formatting with SimpleTable/Column classes.
This new "framework" handles ANSI colors and padding. Removing the
hassle of manually calculating padding. You simply specify the header
with max number of chars the data can be and if you want left/right
padding and the "framework" calculates the padding for you.
We use this new "framework" to pretty print the newly added services
statistics.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add statistics container to service model with memory usage, uptime,
and restart count tracking.
Updates YANG revision to 2025-12-02.
Signed-off-by: Richard Alpe <richard@bit42.se>
This update got pretty messy, since libyang had some
breaking changes. And unfortunatly rousette, libyang-cpp
and sysrepo-cpp has not made any new release yet.
We previously run a draft version of a lot of YANG models,
netconf-server,ssh-server and mode. Now they are released
with minor changes.
infix-meta is an exception, here we had to remove the obsolete
marker of the node and value, since this is no longer allowed in
libyang.
Previously rousette did not install the yang models so we kept a copy
of them in confd. Now it is implemented in rousette, let them install
their models.
On platforms based on CN913{0,1,2}, collect all ECC related counters
so that we know if any correctable errors have been encountered since
the most recent boot.
Allow particular boards or platforms install hardware specific scripts
in /etc/support.d, via the usual /usr/share/product logic, which are
then run by /sbin/support and included in the resulting bundle.
This lets us collect hardware specific information, e.g., SoC-specific
error counters, without /sbin/support needing to know about all the
nitty gritty details.
Verify that if the system encounters a hard lockup, i.e., interrupts
are no longer being serviced, then the system's watchdog will
correctly reboot it.
Rev. A has a FLASH that Linux reconfigures to 4B-addressing, but must
be in 3B-addressing when accessed by the BootROM. Since it has no
reset input, this would not work on warm resets. Linux has a
workaround for this issue for the common case of a controlled reboot,
which this change enables on those boards (which are admittedly few
and far between, but still useful as testing vehicles).
(This won't take effect until Finit is updated to at least 4.15, which
switches over from watchdog- to reboot(2)- based reboot, by default)
By default, ensure that the target device accepts TCP connections on
the specified port before returning the device object. This aligns the
SSH implementation with {NET,REST}CONF.
This solves the issue where tests that use SSH commands early in their
execution would sometimes fail as the remote server had not started up
yet.
Store historical snapshots as compressed .json.gz files to reduce disk
usage. The operational.json file remains uncompressed for easy access.
Signed-off-by: Richard Alpe <richard@bit42.se>
Mattias Walström