Two related problems prevented devices behind an intermediate hub (e.g.
the VIA Labs hub on the RPi 400's VL805 xHCI) from being authorized
when confd unlocks a USB bus:
1. Cascade ordering: usb_authorize() ran nftw() with FTW_DEPTH, which
visits children before the root-hub entry. The hub was authorized
while authorized_default was still 2, so when the kernel probed the
hub's children it immediately denied them. Fix: write
authorized_default=1 on the bus before entering nftw.
2. Slow/async probe: hub port enumeration is asynchronous — devices
behind a hub may appear in sysfs after nftw has already finished.
Fix: add a udev rule that catches usb_device add events on buses
where authorized_default=1 is already set on any ancestor root hub
and authorizes them immediately.
The ATTRS{} matcher in udev walks the full sysfs parent chain, so
authorized_default=1 on the root hub is visible even for devices several
hubs deep. Buses still locked at authorized_default=0 are left alone.
Also expand the docstring in generic_usb_ports() to document the
design: each root hub gets its own uniquely-named entry (USB, or USB1/
USB2/... when multiple) so buses can be individually controlled, and
boards needing finer control should use DT usb-ports annotations.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace the costly read-only filter loop (awk+tr per line) with a
stderr redirect, use /sys/class/net/ instead of ip+jq, and batch
all sysctl writes into a single call.
Reduces boot time by ~4s on 32-bit Arm systems.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling tune2fs for ext4 partitions at boot costs more than one second
boot time on 32-bit Arm systems, with very little gain. Dropping this
restores the default periodic fsck *and* saves boot time.
Instead of calling sgdisk four times, call it only when resizing and
instead use sysfs to find named paritions. Saves seconds on boards
with weaker CPU and slow media.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The MVEBU SafeXcel Crypto Engine firmware (linux-firmware minifw) was
originally added in 70c12c3 to the generic aarch64 defconfigs to silence
kernel probe failures on Marvell Armada SoCs (37xx, 7k, 8k, CN913x):
crypto-safexcel f2800000.crypto: Firmware load failed.
crypto-safexcel f2800000.crypto: HW init failed (-2)
It was then accidentally dropped in 0e2d12e (kernel upgrade to 6.18),
which rebased on a tree that predated the firmware addition.
Rather than restoring it to the generic defconfigs, move it to the two
Marvell board Config.in files where it actually belongs — consistent
with how RTL8169 firmware was handled for the Raspberry Pi CM4 IoT
Router Board Mini in 68313773.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The awk insertion path used getline to peek at the line right after the
"### Changes", but only printed it when NF == 0 (blank line). If the
section already had a non-blank entry (e.g. a Buildroot upgrade line),
getline consumed it silently and the kernel line was written in its
place.
Fix by adding the missing else branch so the consumed line is always
re-emitted — blank lines before the new entry, non-blank lines after it.
Also demote the missing-UNRELEASED guard from exit 1 to a warning with
return 0, so the workflow doesn't abort when a new release cycle hasn't
had its ChangeLog section opened yet.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add three SSH-related commands to the operational CLI:
ssh [user <name>] [port <num>] <host>
Connect to a remote device over SSH, running as the
CLI user (not root) by dropping privileges before exec.
set ssh known-hosts <host> <keytype> <pubkey>
Pre-enroll a host public key received out-of-band (e.g.
via email after a factory reset) into ~/.ssh/known_hosts,
avoiding a TOFU prompt on first connect.
no ssh known-hosts <host>
Remove a stale host key entry using ssh-keygen -R, e.g.
after a device factory reset causes a key mismatch.
Tab completion is provided for key types (ssh-ed25519,
ecdsa-sha2-nistp256, etc.) and for known host names/IPs.
A new run_as_user() helper is introduced alongside the existing
run(), factoring out the fork+setuid+execvp pattern used by
infix_shell() so it can be shared across the SSH functions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A legacy name length limit in firewalld triggered problems with longer
policy names. This patch to firewalld lifts that limit by checking the
backend in use, no limit for nftables.
Fixes#1389
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Always emit the "1..N" plan line before exiting with error so test
harnesses don't report "test error, no plan" for failed or aborted
tests.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Increase Zebra NETLINK buffer to fix reported issues with zebra being
out of sync with kernel routes and interface changes.
Also, try '-a' option to allow other processes to delete zebra routes.
Other changes in this commit:
- Minor fixes to Finit service files for consistency
- Empty daemon.conf stub files to silence bogus mgmtd errors at startup
- Relocate all skeleton files from board/common to separate from files
that are actual Infix additions and what's package system integration
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
network.local is a discovery/browse page, not a management interface.
Serving it over HTTP eliminates the self-signed certificate warning
browsers show for .local mDNS names without changing the security
posture of the actual device management pages (still HTTPS-only).
The new port-80 server_name block takes precedence over the catch-all
HTTP → HTTPS redirect in default.conf.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
avahi-browse returns 127.0.0.1 (or ::1) when resolving services on the
same machine netbrowse is running on. These addresses are meaningless
for display and misleading as click targets. Skip the entire 127.x/::1
range and link-local (fe80:) when choosing the preferred address for a
host card; the card addr field is simply omitted if no routable address
is seen.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- IP address shown in soft parens on the card header line, e.g.
"infix.local (192.168.1.10)"; IPv4 preferred over IPv6, link-local
skipped
- Product name and OS version (from mDNS TXT records "product=" and
"ov=") shown as a secondary line below the header when available
- Theme toggle icons changed from ◐/●/○ to ◐/☽/☀ (system/dark/light)
- browse.go: introduce Host struct (addr, product, version, other, svcs)
replacing the flat []Service map; scan() now returns map[string]Host
- Search also matches against IP, product, and version fields
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Apple devices (e.g. Apple TV) publish vv=1 in their AirPlay/RAOP TXT
records, causing a false positive with our Infix platform marker.
Tighten the filter to require vv=1 together with at least one management
service type (ssh, https, http, netconf, restconf), which Apple devices
never advertise. Keep on=Infix as a fallback for older firmware that
predates vv=1.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
avahi's parseable output uses \DDD decimal escape sequences, not octal.
The previous decoder treated them as octal, causing digits 8 and 9 to
fall through undecoded (e.g. \058 → ':' and \091 → '[' were shown
literally). Also handle \X non-digit escapes (e.g. \. → '.') used for
dots in service instance names.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add a `hostname` leaf to the `mdns` YANG container with default `"%h"`,
allowing operators to override the avahi host-name used for mDNS A/AAAA
records without reflashing. The default expands to DEFAULT_HOSTNAME from
os-release, preserving existing behaviour for unconfigured deployments.
Format specifiers %h/%i/%m are supported via the existing hostnamefmt()
infrastructure, which is also fixed to copy the const fmt argument to a
local buffer before modification (UB when called with a libyang-owned
string).
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Use avahi's %h wildcard in service names so each device's hostname is
included, avoiding collision suffixes (#2, #3) when multiple Infix
devices are on the same network.
Skip TXT records whose JSON value is null rather than emitting empty
key= fields. Add _workstation._tcp (with chassis MAC) and
_device-info._tcp (with model= from product-name) as always-on records
tied to mDNS being active.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify and consolidate generation of mdns service records from an
external script to C. This reduces fork + exec and saves two seconds
of boot time on single core Cortex-A7 systems.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead of publishing A/AAAA records for $(hostname).loocal with a CNAME
infix.local, we flip it around to take advantage of the mDNS conflict
resolution rules. This gives us infix.local for one device ont the LAN
and infix-2.local for the next.
Update all service records to *not* advertise hostname, but instead to
let Avahi imply that from the advertised A/AAAA and CNAME records.
Fixes#1387
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Introduce libfleet.sh and a new 'fleet' subcommand to ixll for managing
and operating enrolled Infix devices via RESTCONF.
Device configuration is stored in ~/.config/infix/config.json
(chmod 600): and organised by profile, allowing bulk operations across
groups of devices (e.g. all aarch64 targets).
New commands:
ixll fleet enroll [-d] [-p profile] [-u user] [-w password] <name> <address>
ixll fleet list
ixll fleet upgrade <name|profile> <url>
ixll fleet backup [-o dir] <name|profile>
ixll fleet reboot <name|profile>
Upgrade runs in parallel across a fleet and shows a live per-device
progress bar by polling the infix-system:install-bundle RPC and the
installer state from the YANG operational data store.
The global -A flag (admin/admin) is honoured as a credential fallback
for devices enrolled without an explicit password.
Also fix a pre-existing typo: ">2" → ">&2" in the error path.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for chronyd's stratumpweight both in the NTP
client (ietf-system) and client+server (ietf-ntp) should fix the flaky
NTP stratum test.
Also, make sure to *not* 'rm -rf /etc/chrony/conf.d/*' in system.c to
prevent clobbering settings potentially made in ntp.c
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg