Set PYTHONPYCACHEDIR=/tmp/__pycache__ in test/env to avoid permission issues
during git cleanup operations. When tests run in Docker containers as root,
__pycache__ directories and .pyc files end up owned by root, preventing the
CI user from cleaning them up.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change exposes the macvlan mode to tests, unlocking support for running
certain types of tests on systems with only a single Ethernet port.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Devices should tell the server what they are in case an administrator
wants to group or hand out dedicated leases and information to some
devices on the lan.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows us to gather better product information in /run/system.json
also for x86 based systems. For Qemu x86_64 systems the 'product-name'
changes from 'VM' to 'Standard PC (i440FX + PIIX, 1996)'.
Also, add new 'product-version' field for, e.g., board revisions, and add
missing 'serial-number' value for systems like Rasperry Pi that inject it
in the device tree.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Validate that DHCP options were requested in the parameter request
list before applying them. This prevents malicious or misconfigured
DHCP servers from forcing unwanted configuration changes.
Validates: hostname (12), DNS (6), domain (15), search (119),
router (3), static routes (121), and NTP (42).
Fail-safe behavior: rejects options if config file unavailable.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The vendor-class option was previously hard-coded to "Infix vXX.YY.Z",
but since this option usually describes the type of the device asking
for a lease, the default has been changed to use the product-name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Resolve race condition between DHCP and configured hostname by introducing
priority-based hostname management using /etc/hostname.d/ directory pattern.
Priority order (highest wins):
90-dhcp-<iface> - DHCP assigned hostname
50-configured - YANG /system/hostname config
10-default - Bootstrap/factory default
The new /usr/libexec/infix/hostname helper reads all sources and applies the
highest priority hostname. It exits early if hostname unchanged, preventing
unnecessary service restarts.
Fixes#1112
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
After some discussion we agreed that this operation is the domain of
confd (or dagger) and any DHCP client should not mess with the admin
state of the interface it runs on.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Basic DHCPv6 client, request a lease and verify Linux installs a
default route from the Router Advertisements (option not included
in DHCPv6), hence the 'enable-ra' option to dnsmasq. Also verify
DNS resolution over IPv6, including the resolvconf dance
- Prefix delegation, verifies that the client can actually request
and receives a prefix from a DHCPv6 server. We don't do anything
with it today though
Two new DHCP server implementations, the basic test relies on dnsmasq
and the prefix delegation test requires an ISC based dhcp server with
server side support for ipv6 prefix delegation. We could reuse the
latter for both tests, but this way we get compatibility testing.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also, update docker/README, because after last confusing update I
couldn't follow my own instructions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Basic DHCPv6 support as a per-interface ipv6 setting, not in line with
the IETF YANG model, which has this as a root container.
Note, this also fixes DHCPv4 option inference after the relocation of
/dhcp-client to /interfaces, in 764bd8e.
Fixes#1110
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Send 10 pings, expect at least one. The GRE test passes with two
received ICMP messages on the Styx test rig, while the VXLAN test
fails with -c 3, so try waiting a bit longer.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Used in Marvell Armada SOCs like the 37xx, 7k, 8k, and CN913x series.
Fixes the following kernel warnings:
[ 16.074759] crypto-safexcel f2800000.crypto: Firmware load failed.
[ 16.087330] crypto-safexcel f2800000.crypto: HW init failed (-2)
[ 16.102696] crypto-safexcel f2800000.crypto: probe with driver crypto-safexcel failed with error -2
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The put_config() retry loop was catching and printing RpcError
exceptions but never re-raising them after exhausting retries.
This caused tests to silently continue despite configuration
failures, masking validation errors.
Now properly propagates errors after all retries are exhausted,
matching the error handling behavior of the RESTCONF backend.
Fixes#1250
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
We use the infinitive, or basic form, in configure context, as do most
other network vendors, so let's do the same in admin exec context.
Also, drop the 'name' qualifier, it is not needed in configure context
so we shouldn't have to use it in admin exec either.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In an effort to consolidate and use familiar command paths for our most
common commands, let's follow suite with Cisco, vtysh, et al.
Add deprecation warning to legacy 'show route [ip|ipv6]' command.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since we just un-deviated this node to be able to create operational
data for ospf interfaces, we should also allow users to set it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Collect more data from FRR to the OSPF and BFD operational datastore.
Refactor CLI commands to use the YANG datastore instead of vtysh.
Additionally, the BFD command(s) have been moved to the top level of
admin-exec, which is where vtysh has them.
Finally, preparing for future OSPFv3 support, all commands have been
given a new context under 'show ip ospf'. Deprecation warnings have
been added to the existing 'show ospf' commands.
Also, for consistency, all commands names in plural have been changed to
their singular form: routes -> route, interfaes -> interface, etc. This
is what vtysh, Cisco, and others do as well.
Fixes#1190
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Silently drop any area-type setting for ospf backbone in a migrate
script to prevent any field issues after upgrading to this fix.
Fixes#1247
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Release tarballs waste ~131MB per architecture by including both
rootfs.itb and rootfs.squashfs, even though rootfs.itb already
contains the squashfs (itb = 4096-byte header + squashfs).
This change removes rootfs.squashfs from releases and provides two
solutions for users who need it:
1. utils/extract-squashfs.sh - Full-featured utility for extracting
squashfs from release tarballs or .itb files. Includes validation
and helpful error messages.
2. board/common/qemu/qemu.sh - Auto-extraction support. When running
in initrd mode, automatically extracts rootfs.squashfs from
rootfs.itb if missing. Zero user impact - ./qemu.sh just works!
Space savings: ~262MB per release (2 architectures × 131MB)
Fixes#858
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg