This commit enables support for running custom startup scripts at boot,
allowing a mix of a NETCONF-based system and Classic /etc. For example,
use NETCONF to set up network interfaces, users, etc. and runparts for
enabling and configuring the device as an OSPF router.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Some critical services must never be stopped, and with the unfortunate
separation of runlevel S and 0 in Finit recently, all affected service
definitions must be updated.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For each build there is an infix-$ARCH-$VARIANT.img -> rootfs.squash
that we want to be a real file when extracting it. This to ease the
integration with testing frameworks like Qeneth.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the introduction of the -classic defconfigs we need to also make
sure to name the resulting artifacts accordingly:
- infix-$ARCH.{gns3a,img,pkg}
- infix-$ARCH-classic.{gns3a,img,pkg}
For release builds the version (-23.02-$REV) will be appended before
the file suffix, e.g., infix-x86-64-classic-23.02-3.img
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- board/common: drop everything not needed by NETCONF mode
- board/classic: most board/common helpers relocated here
- Simplify Finit scripts for critical services
- Source variant from /etc/os-release to select ramdisk /etc
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A long standing internal debate comes to its logical conclusion. Arch
naming should follow GCC. The "native /etc" has also found a better
name: classic!
README and GitHub action has been updated accordingly.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Drop unused packages in NETCONF (default) mode
In the default build we will use the net tool instead of iupdown-ng,
p-net & Profeth will move to customer-specifc builds with another
licensing model.
- Split out NETCONF specific parts from board/common to board/netconf
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This build is intended as a base reference and for use as a very simple
end device. The default starts DHCP and IPv4LL (ZeroConf) on eth0, but
can be configured by editing /etc/network/interfaces.d/*
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Still ways to go here, eth0 should be in a bridge with a vlan1 interface
on top, which in turn should have this config. But let's start here, it
works! :-)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The idea is to, as a plain Infix default, start up devices with DHCP and
IPv4LL/ZeroConf and IPv6 link-local address. Using mDNS the user can
then and push a NETCONF configuration over SSH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is very ugly, what we really want is that the commit_done_hook()
runs when *all* DONE events have been processed in all models. The
side-effect of this hack is that the callback is run twice, both for
ietf-systm and ietf-interfaces if both are modified.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds a first Infix model to augment ietf-ip with a node,
similar to the IPv6 'autoconf' node, also for IPv4. For IPv6 the
autoconf feature comes built-in, for IPv4 it is defined in RFC3927.
The setting behaves the same as for IPv6, but in the case of IPv4 we
enable avahi-autoipd per interface to acquire the 169.254/16 address.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the new templating support in Finit, and this patch, we can now
very easily enable a ZeroConf service on, e.g., eth0:
$ initctl enable zeroconf@eth0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The root user is by default not allowed to log in over SSH, so we add an
admin user with limited root privileges for this purpose.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When calling 'make skeleton-init-finit-rebuild' to (re)install any new
or modified services, we cannot remove everything installed already.
That breaks what other packages may have installed already and is not
the Buildroot way.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
