The regression tests do not pass for some reason, could be faulty test
runner (Lifeboat) -- container and DHCP tests failing since Apr 30), so
tests are disabled until the runner is fixed.
[skip ci]
Issue #1392
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Without INFIX_RELEASE, make test resolves INFIX_ARTIFACT to the
unversioned infix-x86_64, but release builds produce versioned
artifacts (infix-x86_64-v26.04.0-rc1.qcow2 etc.), causing the
test environment to fail with "No such file or directory".
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add an x86_64 regression test job to release.yml that runs after the
build and gates publishing — the release job now requires both build
and test to succeed.
Update test.yml's artifact restore step to use a glob so it handles
both the unversioned CI artifact name (infix-x86_64.tar.gz) and the
versioned release artifact name (infix-x86_64-26.04.0.tar.gz).
Fixes#1392
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add support for static ARP (IPv4) and neighbor cache (IPv6) entries per
interface. Static entries are installed as permanent kernel neighbor
table entries that are never evicted by normal ARP/NDP aging.
Fixes#819
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The mt7622 soc has a built-in wmac, same driver as the mt7615, but
it lacked MODULE_DEVICE_TABLE() so udev could not autoload driver
and firmware.
This commit also adds the wmac+bluetooth specific firmware.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The U-Boot env file is generated by
mkenvimage, which prefixes the variable data with a 4-byte CRC32 by default.
ixpreboot.sh previously imported it with `env import -b` as per uboot docs(-b assume binary format (’0’ separated, “00” terminated).),
which treats the buffer as raw binary and does not strip the CRC.
As a result the first variable's name is parsed a part of CRC.
Later variables import correctly because by then the parser is past the CRC.
Switching to `env import -c` as per uboot docs (-c assume checksum protected environment format.)
makes U-Boot validate and strip the CRC before parsing, so the first variable imports under its real name.
Tested on:
- QEMU
Signed-off-by: Ejub Sabic <ejub1946@outlook.com>
On multi-chip DSA hardware (e.g., boards with multiple mv88e6xxx
chips), each switch chip has its own independent PHC device. With
boundary_clock_jbod enabled, ptp4l starts but only disciplines the
active slave port's PHC — the others drift.
Automatically start phc2sys -a alongside any BC or TC instance using
hardware timestamping. It subscribes to ptp4l's UDS socket, tracks
BMCA, and disciplines all non-active PHCs to match the active one.
On single-chip hardware it is a harmless no-op.
CLOCK_REALTIME is intentionally left untouched. Syncing the system
clock to PTP (phc2sys -rr), feeding the PHC from GPS/NTP (ts2phc,
phc2sys reverse), and full multi-source coordination (timemaster) are
planned as follow-on phases; see the issue tracker for the roadmap.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
NOTE: this is intended only for use on devboards like EspressoBin where
the onboard bootloader only understands fat and ext2 file systems.
To enable, use 'make apply-ext4'
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Inverted values for eMMC and SPI NAND. Also use ABCD instead of
Position as column name to match board markings.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add a board README to explain how to get Infix running
- Update mkimage.sh to allow creating images without boot loader
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
ael-bot