Both L2 and L3 is supported.
With VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge vlans vlan 1 multicast-filter 224.1.3.4 ports e0
Without VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge multicast-filter 224.1.2.3 ports e0
- Rename mdb -> multicast-filters
- Add support for L2 multicast groups
- Change vlan, multicast and mulitcast-filters containers to presence
containers. This will result in that snooping will be disabled when
creating a bridge (or a vlan if vlan-filtered)
- Force the user to choose between VLANs and Multicast on top level bridge configuration
- Force L2 multicast to be state permanent
If an absolute path contains '../' we disallow it because what are you
doing, possible security violation.
Built-ins for running, startup, etc. remain as-is.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On any change to a container network interface we should schedule a
restart of the container to activate the changes. This code triggers
also at boot, when applying the whole startup-config, which initctl
handles by queuing any create/touch events for services.
This patch depends on the two previous commtis backporing fixes to
Finit's initctl tool and an upgrade of the k8s-logger.
Fixes#375
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Fixes issues with logger not exiting gracefully on signals (at all)
and busy-looping on stale FIFO.
Related to issue #375
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Patches in queue for upcoming v4.8 release of Finit fixes:
- initctl touch does not respect -n flag, returning error
- initctl touch does not support template services
Related to issue #375
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
That factory-config and failure-config can be overridden by customer
specific requirements is documented in the branding document. Focus
on Infix native defaults in general documentation.
Move most of customer specifics to foot note.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 4bfedf7a9 support for disabling IPv6/IPv4 link-local addresses was
added, which in turn caused this regression.
Regression in the v24.03 release cycle, not released -- low severity.
Fixes#353
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Translate LOWER-LAYER-DOWN -> LOWER-DOWN in "show interfaces" overview
and keep LOWER-LAYER-DOWN in detailed "show interfaces name eth0".
Issue #358
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Error: error creating container storage: the container name "infamy0" is already in use by "2011c2d7cb1737b788b854a8bd08e519f3cbd6e36dae4975784978cff1f238fc". You have to remove that container to be able to reuse that name.: that name is already in use
make[1]: *** [/home/github-runner/actions-runner/_work/infix/infix/test/test.mk:6: test-unit] Error 125
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Also, log the actual `podman create` arguments to the container log so
we can see what the script actually does when customers report bizarre
happenings with containers.
Fixes#370
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change adds limited support for container capabilities. It allows
a more fine-grained control than priviliged mode does.
Fixes#365
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add exception for local images, the "pull" step must be handled by the
operator, i.e., wget of the latest image to the same location as set up
in the image configuration, e.g., for oci-archive:/tmp/foo.tar.gz that
/tmp/foo.tar.gz exists when issuing the upgrade command.
Fixes#368
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
OCI archives are a bit special. Mention how to load, reference, and
upgrade system using such images.
Fixes#368
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In a host interface setup, i.e., moving an interface from the host to a
container, often using VETH pairs, any route should only be set when an
IP address has been set. This because the CNI ipam plugin, which we
use, require routes be part of ipam, which in turn requires an address.
For details, see <https://www.cni.dev/plugins/current/ipam/static/>
Fixes#366
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
All querier functionality for IGMP now handled by mcd, even if there are
no VLAN interfaces on top of the bridge. Also, mcd now handles unique
query interval per interface, or per VLAN, so we no longer need multiple
daemons running.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Mattias Walström