Break out unit tests to separate make target as they don't require all
the built code and infrastructure that the normal tests does.
Run the unit tests early in the Github action stage. They don't
require a full build. This will give early feedback to the users.
Signed-off-by: Richard Alpe <richard@bit42.se>
In this patch we add some arbitrary system output files which contains
interface data. Such as the output from "ip link" and "ethtool". These
files are used by yanger instead of running the actual commands.
Yanger then generates a lot of YANG json data, which are merged using
jq into something that looks like the sysrepo operational data on
a running system. This data is then passed though cli-pretty and its
ouput is compared to the static expected output in the .txt files in
cli-output.
Here's a basic flow overview.
* system-output/foo.json -> yanger ->> data
* system-output/bar.json -> yanger ->> data
* data -> merge -> sysrepo-operational-data
* sysrepo-operational-data -> cli-pretty -> output.txt
* compare output.txt too cli-output/show-foobar.txt
The result of this is that if something changes in yanger OR in
cli-pretty. The corresponding system-output file needs to be updated
for the test to pass. This is indented to catch regression where the
output is unintentionally changed.
Signed-off-by: Richard Alpe <richard@bit42.se>
Normally, no logins are actually possible, but this will have two
desirable effects effects:
- /etc/issue will be printed when hitting return over the console,
allowing the user to see the bootstrapping errors again, without
having to reboot the system.
- On devleoper builds, with CONFIG_TARGET_ENABLE_ROOT_LOGIN, we can
login as root and debug issues.
Collect all bootstrapping issues in all banner-like files during boot,
so that they are presented to the user when logging in. This should
make it harder to miss overlook the fact that a system is running in a
degraded state.
Before this change, the system would move to runlevel 9 as soon as
startup-config failed to load, in which no getty is allowed to run.
Instead, we want to reserve that runlevel for when failure-config
itself also fails to load, since the system will have no valid login
credentials at that point.
This fixes [ERR] from CLI `show routes`, and broken operational status
in setups with DHCP client enabled by default.
Feature (static routing) introduced in release cycle, no need to bring
up in release notes.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
As it turns out, references to module objects are not safe to keep
across callbacks. In particular: loading a new model into sysrepo at
runtime may cause it to move objects around in memory.
Therefore, fetch a valid reference to "infix-system" on every callback
instead.
* sniffer did not work correctly
* links did not come upp as quick as in qemu
* must_reach in netns was to narrow, increase timeout
* add wait function to handle poll
Currently we only advertise SSH+SFTP services over mDNS-SD, which are
the default services from the avahi package. This patch adds support
for _netconf-ssh._tcp as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Empirical studies shows that the surge protection on the alder board
is not compatible with Energy Efficient Ethernet.
Root cause has not yet been determined.
On the P2's the only reasonable way (in terms of hardware patching
effort) of driving the LEDs is to have the green LEDs at the top and
the yellow ones at the bottom.
Turns out that the gpio-charger doesn't have polled fallback if the
GPIO pin can't function as an interrupt controller.
Fortunately, we have access to the IRQ pin, so we can just use that
for now and leave the driver as-is.
Drop this deviation for v23.11 since it clashes with pyang + NETCONFc client.
We expect to support configuration of speed+duplex in v23.12.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the latest bump of klish-plugin-sysrepo we no longer need the extra
container name in commands and paths.
Also, update the "show interfaces" example in the top-level README.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This adds support for collapsing container-lists where applicable.
E.g., 'edit interfaces interface eth0' -> 'edit interface eth0'.
Great care has been taken to not mess up when container-lists are
critical, like ipv4/ipv6 routes.
Fix#187
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
