bridge -j vlan global show can return VLAN ranges as
{"vlan": 1, "vlanEnd": 3} instead of individual entries.
The vlans dict was only keyed on the start value, causing
port VLANs 2 and 3 to be reported as "Unexpected".
Also fix typo in error message (brpvlans -> brpvlan).
Move the hostname-triggers-dhcp-client logic from dhcp-client.c into
the centralized dep_hostname() dependency tracker. When the hostname
changes, all interfaces with DHCP client configured are now added to
the diff by the core dependency resolver, so dhcp_client_change() picks
them up through its normal diff-based interface iteration.
When keystore keys change, trigger regeneration of wireguard
interfaces that reference them:
- Asymmetric key change: triggers interfaces using it as private-key
- Symmetric key change: triggers interfaces using it as preshared-key
(both at peers bag-level and individual peer-level)
Was not correct handled before, a few assumptions was made,
but did not work in reality.
* Fix correct channels for WiFi 6E
* Add missing parameters required for 6ghz to work
Summary of Changes:
bfdd:
- cap IPv6 echo reflection to declared length
- account for FP offset in echo length checks
- fix recv errno filter logic in a few places
- tighten SBFD reflector packet sanity checks
- gate IPv6 echo reflection on known sessions
- tighten auth header parsing skeleton
- validate control packet length before session lookup
bgpd:
- Fix memleak when configuring rd
- Validate if NHC BGPID TLV value is non-zero
- Avoid having a dangling pointer after we free NHC attribute
- Check if BGPID NHC TLV exists when IPv6 next-hop is link-local
- Do not allocate NHC TLV with an extra trailer
- migrate timers during peer_xfer_conn to fix stale route cleanup
- honor 'no activate' for dynamic neighbors in peer-group
- Return immediately when dynamic capability action is not valid
- Validate BGP role capability when handling it dynamically
- fix neighbor IP comparison for IPv6 memcmp return values
- Don't mark nexthop as changed if a set next-hop unchanged is applied
- Return BGP_PEER_INTERNAL when first peer's as type is set to auto
- Update peer sort cache when remote-as auto is used and AS number changed
- Check dynamic capability action before validating ENHE capability
- Do not allocate stream if route-refresh capability is not received
- Move rpki strict check to bgp_accept()
- Fix memory leak for nhc attribute if ipv6 is link-local address
- Fix compilation for Debian 11 when printing uint64 values
- Return zero labels if no BOS found and it's not a withdraw label
- Fix signed overflow in hexstr2num()
- Check the length also when parsing ENCAP attr sub-TLVs
- Validate prefixlen before subtracting when parsing labeled unicast NLRI
- Reset the stream to attr_start + attribute_len when WITHDRAWN
- Revalidate locally originated routes against RPKI changes
- Check if prefixlen is not 0 when parsing flowspec stuff
- Prevent len_string going negative when trying to display flowspec entries
- fix import vrf on non existing vrf
- fix no vrf import command
- Free hostname for FQDN capability if the parsing goes wrong
- Validate MP_REACH_NLRI attribute against incorrect next-hop
- Fix dynamic FQDN capability handling
- Check if the remaining length for subtracting TLV length is enough
- Fix the end pointer boundaries for dynamic graceful restart capability
- Add missing returns when parsing enhanced route-refresh
- Return original as-path when reconciling AS versus AS4
- Do not process route-refresh for AFI/SAFI if it's not negotiated
- Check if we are not overusing error_data buffer when unknown cap received
- fix NHT for explicit link-local BGP peers
- improve packet parsing for EVPN and ENCAP/VNC
- Prevent heap use-after-free for tunnel encapsulation attribute
- Return 0 if AS4 capability is malformed
- close dynamic peer socket in ttl error path
- fix logic handling EVPN_FLAG_DEFAULT_GW
- avoid early return in MPLSVPN NLRI processing
- remove unneeded asserts in packet reads
eigrpd:
- fix byte order in Hello TLV decode functions
- Handling for malformed update packets
- enforce minimum TLV length in Hello handler
- reject invalid prefix mask len
- skip unknown and ignored TLVs
- Improve packet validation
isisd:
- Reject SRv6 Locator TLV with Loc-Size of zero
- consume leftover bytes after FAD sub-sub-TLV loop
- use correct min size values for srv6 subtlvs
- improve validation of flex-algo decoder
- Fix missing neighbor address Sub-TLVs after link-params change
- add unit test for remove_excess_adjs() memory leak fix
- fix memory leak in remove_excess_adjs()
- fix edge condition in max_lsp_count computation
ldpd:
- improve tlv validation in several places
lib:
- Report IPv6 MTU and not IPv4 for if_update_state_mtu6
- disable warning in zlog.c to match master
nhrpd:
- stop debugging auth credentials
- fix byte-order when comparing error code in shortcut path
- guard against zbuf_pulln NULL on truncated packets
- require auth for all received packet types
- harden debug packet parsing against malformed input
- validate AFI index in extension replies
ospf6d:
- move log call out of priv block
- remove asserts in packet-handling paths
- fix issues in ospf6 auth trailer code
ospfd:
- add LSA validation in the apiserver path
- add validation in several places before accessing
pceplib:
- validate during of_list TLV decoding
pimd:
- fix NOCACHE MFC resync detection log, add vrf name too
- use upstream-owned pim pointer in register and upstream timers
- use upstream-owned pim pointer in MSDP update paths
- avoid JP build deref through channel OIL
- guard RP RPF-failure mroute delete on detached OIL
- avoid null deref in upstream delete debug path
- guard channel OIL detach against stale pointers
- fix crash due to double free
- Ensure igmp message is of proper size
- Reject pim packets with a malformed header length
- Fix out of bounds read in AutoRP code
- igmpv3 never checks packet length and trusts the num-sources field
- Do not allow a register-stop message if not received from the RP
- Prevent received msg length from being larger than buffer
- Remove unnecessary asserts
- When receiving a register stop ensure we have enough data to read
- Ensure a register packet has enough space to read S,G data
- Ensure that header has space on packet
ripngd:
- fix data handling in several places
tests:
- Check if route-map with set nexthop unchanged does not prevent outgoing
- Check if mixed peer-group remote-as types can be used with auto
- Verify neighbor addr Sub-TLVs after link-params reset
- Expect return code being 0, not -1 when AS4 is empty or ASN is 0
vrrpd:
- replace some asserts
- only support ethernet in GARP code
- limit advertised timers to 12-bits
Signed-off-by: Mattias Walström <lazzer@gmail.com>
This fix the instability of the display on soft reboots,
previous it required a powercycle to get display to work properly
Add patches from rpi-linux, and a small fixup from me.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
Unfortunatly the fix was entered in 25.10, but confd was not stepped
up until 25.11, so this should be for 25.10 but now it is for confd
version 1.6 (infix 25.11), as close as we can get.
this is a follwup for commit 7e37fc49a3
confd: prevent IP addresses on bridge ports
Bridge ports should not have IP addresses configured. The IP address
should be configured on the bridge interface itself, not its member ports.
Add YANG must expression to enforce this rule at configuration time.
Fixes#1122
Add input validation patterns to string-type leaves in container,
firewall, DHCP, and interface YANG models. Also use mkdtemp() for
temporary key files in keystore.
Signed-off-by: Mattias Walström <lazzer@gmail.com>
This includes adding a netd-daemon since FRR has gone towards all
daemons should be configured from mgmtd using YANG, netd uses gRPC to
reconfigure in mgmtd
Signed-off-by: Enable grpc
This is a simple two port router board, with the same
WiFi chips as BPI-r3.
The bootloader shall be the same as the BPI-r3, the bootloader
now probes which of the two is booting by checking for the PHYS
that only exist on BPI-r3-mini.
RSSI is a vendor-specific relative index (0-255), while dBm is an
absolute power measurement. Since we report dBm values from iw,
rename the leaf to signal-strength for accuracy.
Learned one thing, a setting not set, is a safe setting.
bss_color made a lot of iPhones failed to connect.
Remove some more options with unknown impact.
