Mirrors the CLI's "show hardware" command — a single page that summarises
everything ietf-hardware exposes about the device:
- Board (chassis info: model, manufacturer, serial, base MAC)
- USB Ports (state + description)
- WiFi Radios (bands, standards, max-AP)
- GPS Receivers
- Sensors (grouped by parent component, all status values)
- Other Components (fallback so the page is exhaustive)
This is Phase 1 of webui-roadmap-v2. Phase 2 will trim the dashboard's
Sensors card to a few key vitals with an "All sensors →" link here,
fixing the existing height-clipping regression in the process.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The NTP page showed a red "Failed to fetch NTP data" banner whenever
/data/ietf-ntp:ntp returned 404 — which is the normal RESTCONF response
when NTP isn't configured at all. Treat 404 as the not-configured case
and render the empty-state card with a Configure → link, mirroring the
DHCP status page.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The errors.As(err, &rcErr) + StatusCode == http.StatusNotFound boilerplate
was repeated across six handlers. Replace with the IsNotFound helper
introduced in restconf/errors.go, dropping the now-unused errors import
from each affected file along the way.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adds a per-user inactivity countdown that POSTs /logout after a
configurable timeout (default 15 min, persisted in localStorage)
and navigates to /login. Background pollers (watchdog, *counters
refresh) are excluded from the activity reset so they don't keep
the session alive indefinitely. htmx:responseError on 401 short-
circuits straight to /login so a server-side expiration doesn't
leave the UI failing silently.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Idea of wizard is to simplify:
- Re-adding Ethernet interfaces you've accidentally removed
- Setting up WiFi access point/station, incl. radio & PSK
- VLAN filtering bridges
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Adds Configure > Routes page for viewing, adding, editing, and deleting
IPv4 and IPv6 static routes. Each route row expands in-place to an edit
form; YANG field descriptions are shown as ⓘ tooltips.
Also fixes a goyang bug where inline augments inside a uses block were
never applied to the expanded tree, making it so next-hop-address and
outgoing-interface were missing from the schema — and therefore had no
tooltip text.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Navigating interfaces now work, and the tree follows the accordion style
like the rest of the UI.
Also, some updates to the curated pages: online help, lists of leafrefs
instead of hard-coded list options.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Implements the configure accordion section with a candidate datastore
workflow: opening Configure copies running → candidate (Enter), each
card saves directly to candidate, Apply copies candidate → running
atomically, and Abort discards by resetting candidate from running.
- RESTCONF client: add Put, Patch, Delete, GetDatastore, PutDatastore,
CopyDatastore, and a shared doRequest/writeJSON helper
- Handlers: ConfigureHandler (enter/apply/abort), ConfigureSystemHandler
(hostname, clock, NTP, DNS, motd, editor), ConfigureUsersHandler
(add/delete user, shell, password, SSH keys, NACM group membership)
- Status > NACM page: read-only group permission matrix derived from
ietf-netconf-acm groups + rule-list mappings
- Sticky Apply/Abort toolbar with custom confirm dialog; server returns
HX-Redirect:/ so HTMX does a full-page reload, keeping sidebar in sync
- Accordion persistence fixed: Configure excluded from localStorage so it
never auto-reopens after Abort/Apply; restore no longer closes an
accordion that contains the active page
- Password hashing by shelling out to mkpasswd(1)
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Group nav items by purpose:
- Security: Firewall, WireGuard, NACM
- Services: Services, DHCP, NTP, LLDP, mDNS (moved from Network)
- Network trimmed to: Interfaces, Routing, WiFi
Rename Dashboard → Overview for clearer Status > System > Overview
navigation hierarchy.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add a zone-to-zone traffic matrix matching the CLI's traffic_flow logic:
- HOST row/column always present; zone→HOST uses zone action + services
(not policies), producing allow/conditional/deny verdicts correctly
- Clicking a matrix cell shows a detail panel with the policy or zone
reason for the verdict
- Conditional (⚠) detection for zones with services or port-forwarding
Enrich the policy and zone tables:
- Immutable (built-in) policies flagged with ⚷ in column header and row
- Policy rows show description as tooltip; sorted by priority
- Zones table renamed "Host Services" column; Policies drops Priority column
- Wide tables (Zones, Policies) span two grid columns like Dashboard WiFi
Fix the info-grid layout: #content lacked width:100% so margin:0 auto
was overriding flex stretch, collapsing the grid to a single column on
both the firewall and dashboard pages.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Display interfaces in a hierarchical tree: bridge and LAG parent rows
show a ▼ toggle in the tree column that collapses/expands their member
ports. The vertical connector line disappears when collapsed. Member
ports within each group are sorted alphabetically; loopback interfaces
always appear first, the rest alphabetically.
A ⚑ forwarding-flag column indicates which interfaces have IP
forwarding enabled, fetched concurrently from ietf-routing:routing.
The "Address" and "Detail" columns are replaced by a single "Data"
column matching the CLI layout: IP addresses, VLAN id, WiFi SSID/mode,
WireGuard peer count, etc. Table rows are top-aligned so interfaces
with multiple addresses don't cause odd vertical centering on other
cells; the two narrow icon columns (⚑ and tree) stay middle-aligned.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Expandable detail row per key. Clicking the ▶ arrow left of the name
unfolds a full-width row showing labeled key fields (Value / Public Key
/ Private Key) as word-wrapped monospace blocks (max-width: 72ch),
making base64 data easy to read and copy.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Split the old monolithic Hardware card into dedicated Board, WiFi, and
Sensors cards, matching the structure of `show system` / `show hardware`
in the CLI:
- System Information: add Current Time row, rename Firmware → Boot Partition
- Board: model, manufacturer, Base MAC only (no sensors)
- WiFi (new, conditional): all radios with supported bands, standards
(11n/11ac/11ax), and max AP count; card spans 2 grid columns so the
table never needs horizontal scroll
- Sensors (new, conditional, collapsible): all hardware sensors grouped
by parent component (SFP sub-sensors indent under sfp1/sfp2 headings);
JS "Show more" button injected only when content overflows 300 px
- Disk Usage: replaced wide multi-column table with a per-mount widget
(path + % on one line, health bar, "X free of Y" below); health colour
follows the same warn/crit thresholds as the memory bar
- Fix humanKiB to output IEC units (MiB / GiB) with a space, matching
the memory display style
- Fix info-table th wrapping (width:1%; white-space:nowrap)
- Fix JS collapsible init to run on DOMContentLoaded, not immediately in
<head>, so scrollHeight check has a real DOM to inspect
- CSS scroll-shadow on data-table-wrap: pure-CSS right-edge shadow
indicates overflow without needing JS or a scroll listener
- Equal-height grid rows via align-items:stretch; info-grid-span-2 for
cards with wide tables
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace the RAUC-centric firmware page with a cleaner layout:
- Show software slots (primary/secondary) using their bootnames rather
than internal RAUC slot names; filter to rootfs-class slots only
- Add boot order display (mirrors `show software` in the CLI)
- Show installed timestamp per slot (truncated to second precision)
- Fix Booted flag comparison: compare against bootname not slot name
- Lay out all three cards (Software, Install from URL, Upload & Install)
in a responsive grid instead of full-width stacked sections
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Drop the useless 768–1024px icon-only sidebar mode; everything up to
1024px now uses the hamburger overlay and full-width sidebar.
Fix the user dropdown on touch devices: click now toggles aria-expanded
so CSS-driven visibility works without hover. A document click listener
closes the menu when tapping outside.
Give the sidebar proper light/dark tokens instead of hardcoded dark
values. Introduce --sidebar-hover-fg (primary in light, white in dark)
so nav-link hover text is legible in both themes.
Fix dropdown hover background using --border instead of --border-subtle,
which had zero contrast against the surface in dark mode.
Keep active nav link in sync with the current URL via JS so it updates
correctly after htmx navigation instead of staying on the initial
server-rendered page. Also, add YouTube-style progress when laoding
pages that take time, e.g., Dashboard.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Anonymise the login page: generic "Login" title, lock icon instead
of product logo — makes the device harder to fingerprint.
Add a floating theme toggle button to the login page so users can
switch theme before logging in (cycles auto→light→dark).
Replace the four cluttered sidebar footer buttons (theme, download
config, reboot, logout) with an always-visible topbar user menu.
The dropdown shows the username, three theme options with a checkmark
on the active one, download config, reboot, and logout.
Refactor all handler page-data structs to embed PageData instead of
repeating the four base fields, and add Username (sourced from the
request context) so the topbar can display the logged-in user.
Polish pass on the login card: spacing, focus styles, button weights.
Replace the AES-encrypted-cookie session model with an opaque random
token backed by an in-memory map. The vendored design embedded the
user's username, password, CSRF, and feature flags into the cookie
and persisted the AES key under /var/lib/misc, making the keyfile a
passive credential-recovery oracle — anyone who could read it could
decrypt any captured cookie and recover the plaintext admin password.
Now: cookie is 32 bytes of crypto/rand, base64-url-encoded; sessions
live only in process memory; reboot/respawn/upgrade drops every
active session and the UI's 401 handler bounces the user to /login.
Sliding-window refresh on user activity, janitor goroutine sweeps
expired entries. --session-key flag and /var/lib/misc/webui-session.key
are gone.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Replace flat nav-section-header labels with collapsible <details>/<summary>
accordion groups (Network, Wireless, VPN, Services, System). Groups default
open; user state persists via localStorage. Tablet icon-only mode always
shows all items regardless of open/closed state.
Add badge-up/down/warning/info/neutral utility classes with full dark mode
support, complementing the existing firewall-specific badge variants.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
avahi resolves mDNS hostname conflicts at runtime by appending -2, -3, …
but the advertiser writes its adminurl TXT record with the configured
hostname and never updates it. A device renamed infix-2.local thus keeps
advertising adminurl=http://infix.local, so its card linked to the other
device. Rebase the adminurl onto the actually-resolved host (keeping
scheme, port, and path); a no-op in the common single-device case.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Include /run and /tmp in mount-points, likely more interesting than /.
- Include advertised link modes in operational to compare with supported
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The contact and location leaves were absent from the operational
datastore. Fetch each leaf from the running ds tool and inject
into ietf-system:system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Two unrelated must expressions referenced schema nodes that don't exist,
emitting warnings on every schema load (and in netopeer2-cli):
- NTP: the iburst/burst deviations put the must on the leaf, so
"ntp:iburst"/"ntp:burst" resolved as a child of the leaf. Use ".".
- WireGuard: deref() of a key *-ref lands on the key's "name" leaf, so
"deref(.)/ks:public-key-format" looked under "name". Use
"deref(.)/../...", and descend into the "public-key" list for the
truststore public-key-bag.
Extend the existing 'show <running|startup|factory>-config' family with an
optional 'path /XPATH' argument that maps straight to the underlying 'copy
-x' flag, and add 'show operational [path /XPATH]' for symmetry with the
configuration datastores.
admin@example:/> show running-config path /ietf-interfaces:interfaces
admin@example:/> show operational path /ietf-system:system-state
Also, improve error feedback from the copy command slightly.
Before:
admin@example:~$ copy running -x /foo
Error: (null) (5)
Error: failed retrieving running-config data
After:
admin@example:~$ copy running -x /foo
Error: Couldn't parse path "/foo": Prefix "foo" not defined. (5)
Error: failed retrieving running-config data
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
cli-pretty prints a friendly message on stdout before any sys.exit(1)
— 'Interface "w" not found', 'Error, top level "ietf-routing:routing"
missing', etc. The wrapper used subprocess.run(..., check=True) and
on non-zero exit caught CalledProcessError, throwing away the captured
stdout and printing the generic exception message instead.
Drop the check=True / try-except dance, always relay stdout, and only
fall back to the generic 'Error running cli-pretty' line when the
subprocess crashed without producing any output.
Before:
admin@bpi:/> show interface w
Error running cli-pretty: Command '['/usr/libexec/statd/cli-pretty',
'show-interfaces', '-n', 'w']' returned non-zero exit status 1.
After:
admin@bpi:/> show interface w
Interface "w" not found
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Ethernet packet/RMON counters at the bottom of 'show interface
<name>' were appended with a wider label column than the operational
data above them, breaking visual alignment. Group them under an
"Ethernet Statistics" section heading (Decore.title), same convention
as 'Available Networks' in the wifi scan view.
Narrow the operational-data label column from 20 to 19 chars so the
title bar exactly matches the heading text — a tighter and more
deliberately aligned look. All labels in pr_iface fit within 19
chars except 'lacp system priority' (20); rename it to 'lacp sys
priority' for consistency with the other 'lacp ...' labels (lacp
aggregate id, lacp partner mac, ...) so the new field width works
universally.
Refresh CLI snapshots and doc samples to match.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Update CLI samples across the documentation to the new layered
presentation: physical-medium row when linked (1000baseT/...), bare
MACs, and key: value DATA tokens. Add a short prose block in
ethernet.md and iface.md explaining the layering.
Drop the historical 'show interfaces' (plural) form — removed from
klish years ago — from all user-facing examples and the landing page.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Import ieee802-ethernet-interface@2025-09-10.yang, from IEEE 802.3.2-2025,
and companion ieee802-ethernet-phy-type.yang, replacing the 2019 revision.
Operational interface speed moves to ietf-interfaces:speed, RFC 8343,
eth:speed is now obsolete. Bump infix-interfaces.yang revision to track
the upgrade.
The CLI 'show interface' command renders interfaces as bottom-up layered
protocol rows. Ethernet interfaces a new IEEE link-mode row (1000baseT,
10GbaseLR, ...) is added with 'duplex: full|half' in the DATA column.
Without link the ethernet row is the first row. Tunnels and wifi follow
the same layering: gre/vxlan rows carry remote:/vni: tokens with optional
ethernet sub-row for the L2-bearing variants; wifi rows carry 'station' or
'access-point' ssid:, signal:, stations: tokens.
admin@bpi-76-8f-c2:/> show interface
⚑ INTERFACE PROTOCOL STATE DATA
⇅ lo loopback UP
ipv4 127.0.0.1/8 (static)
ipv6 ::1/128 (static)
⇅ br0 bridge DOWN
│ ethernet 32:2e:3f:76:8f:c2
│ ipv4 192.168.0.1/24 (static)
⇅ ├ lan0 bridge LOWER-DOWN
⇅ ├ lan1 bridge LOWER-DOWN
⇅ ├ lan2 bridge LOWER-DOWN
⇅ └ lan3 bridge LOWER-DOWN
⇅ gre0 gre UP remote: 198.51.100.7
ipv4 10.255.0.1/30 (static)
⇅ sfp1 ethernet DOWN ca:59:f0:77:80:5b
⇅ wan 1000baseT UP duplex: full
ethernet 32:2e:3f:76:8f:c2
ipv4 192.168.0.235/24 (dhcp)
ipv6 fe80::302e:3fff:fe76:8fc2/64 (link-layer)
⇅ wan.10 vlan UP vid: 10
│ ipv4 10.0.10.1/24 (static)
└ wan
⇅ wan.10.20 vlan UP vid: 20
│ ipv4 10.0.10.20/28 (static)
└ wan.10
⇅ wifi0 wifi UP station ssid: corp-net signal: good
ethernet dc:a6:32:00:11:22
ipv4 192.168.7.42/24 (dhcp)
yanger populates phy-type and pmd-type from a static ETHTOOL link-mode
identity table keyed on (port, speed, duplex). Both leaves are populated
for unambiguous media (copper, DAC, copper-T); for generic fiber where
the (port, speed, duplex) tuple can map to multiple PMDs (SR vs LR vs
ER, etc.) only the phy-type family identity is emitted — guessing the
PMD would be misleading. cli_pretty prefers pmd-type (specific) and
falls back to phy-type (family) for display.
yanger also emits ietf-interfaces:speed and fixes a long-standing
'auto-negotation' typo (yanger had never matched ethtool's correctly-
spelled JSON field, so operational auto-negotiation always read
'unknown').
Filling the WG's gap on fixed-speed config
------------------------------------------
IEEE Std 802.3.2-2025 obsoleted the eth:speed leaf without providing a
config-true replacement; the standards-correct way to express what
older Infix configurations called 'fixed speed' is to restrict the set
of PMDs auto-negotiation may advertise. Augment auto-negotiation with
two leaf-lists:
auto-negotiation/advertised-pmd-types config-true, leaf-list of pmd-type
ethernet/supported-pmd-types config-false, leaf-list of pmd-type
Pinning a port to a single mode is now expressed as a single-entry
advertised-pmd-types list. The kernel-supported set is exposed as
operational state for diagnosis — SFP/SFP+ cages report the inserted
module's capabilities, narrowing the list to a single PMD when the
optic only supports one mode (as suggested by @wkz in PR review).
When the supported list collapses to a single entry, yanger uses it
to refine the operational pmd-type leaf — more accurate than the
(port, speed, duplex) lookup for fiber.
confd C apply path (src/confd/src/ieee802-ethernet-interface.c)
translates each advertised pmd-type identity to the corresponding
ETHTOOL_LINK_MODE_*_BIT_*, ORs them into a mask, and emits
'ethtool --change <if> autoneg on advertise 0x<mask>'. An empty
list keeps the historical default of advertising every supported
mode. The (legacy) 'auto-negotiation/enable = false' + speed/duplex
branch is removed — it has no model representation any more.
cli_pretty's detail view gains 'advertised' and 'supported' rows
listing the PMDs in each set. A new _pr_label_list() helper unifies
multi-row rendering across these new rows and the pre-existing
ipv4/ipv6 address rows.
The detailed interface view also gains a 'link mode' row carrying the
pmd-type / phy-type-derived label.
Migration of existing startup configurations
--------------------------------------------
Bump confd version 1.8 → 1.9 to trigger the migration on upgrade.
share/migrate/1.9/10-ethernet-advertise.sh translates old configs of
the form
ethernet { auto-negotiation { enable false; } speed S; duplex D; }
into
ethernet { auto-negotiation { advertised-pmd-types [PMD]; } duplex D; }
mapping (S, D) → PMD via a static lookup covering the copper-T speeds
the deprecated speed leaf historically supported (10/100/1000/2.5G/
5G/10G). Interfaces that don't disable auto-negotiation, or that
lack a speed leaf, are passed through untouched.
Closes#530Closes#805
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
bridge -j vlan global show can return VLAN ranges as
{"vlan": 1, "vlanEnd": 3} instead of individual entries.
The vlans dict was only keyed on the start value, causing
port VLANs 2 and 3 to be reported as "Unexpected".
Also fix typo in error message (brpvlans -> brpvlan).
Move the hostname-triggers-dhcp-client logic from dhcp-client.c into
the centralized dep_hostname() dependency tracker. When the hostname
changes, all interfaces with DHCP client configured are now added to
the diff by the core dependency resolver, so dhcp_client_change() picks
them up through its normal diff-based interface iteration.
When keystore keys change, trigger regeneration of wireguard
interfaces that reference them:
- Asymmetric key change: triggers interfaces using it as private-key
- Symmetric key change: triggers interfaces using it as preshared-key
(both at peers bag-level and individual peer-level)
The 'command' leaf is config, with a strict pattern that doesn't allow
'&', quotes or pipes. Yanger was populating it from podman's full,
untruncated container command -- so any container whose entrypoint
uses shell metacharacters (e.g. sh -c "... && ...") failed YANG
validation.
The symptom: every operational read of /infix-containers:containers
returns SR_ERR_INTERNAL, which in turn fails the whole get-data on
the operational datastore. This breaks case/misc/operational_all and
any RESTCONF/NETCONF read that touches containers.
This was introduced in 59028c4 ("Fix #1466: 'show container' shows no
output"), which added the operational, pattern-less 'cmdline' leaf
but left the old 'command' assignment in place. Drop it -- 'cmdline'
already carries the full command line, and 'command' belongs to
running config.
Note: the failure can look intermittent across test runs because
podman storage is persistent. It only triggers once a container with
a bad-pattern command ends up in 'podman ps -a', including stale or
exited leftovers from earlier runs.
Signed-off-by: Richard Alpe <richard@bit42.se>
Was not correct handled before, a few assumptions was made,
but did not work in reality.
* Fix correct channels for WiFi 6E
* Add missing parameters required for 6ghz to work
Joachim Wiberg