Check if partition/LABEL is available before trying to run tune2fs and
mount commands on it. This change masks the kernel output:
LABEL=var: Can't lookup blockdev
commne when running `make run` on x86_64 builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 45efa94 we introduced new mount options for the: 'aux', 'cfg', and
'var' partitions. To save boot time, we also disabled the periodic fsck
check, which does not affect journal replay or other Ext4 safety or
integrity checks. The latter involved calling tune2fs at runtime, but
this caused the following to appear for the 'aux' partition, which is an
ext2 for systems that need to change U-Boot settings, e.g., to set MAC
address on systems without a VPD.
EXT4-fs: Mount option(s) incompatible with ext2
To make matters worse, the new mount option(s), e.g., 'commit=30', gave
us another set of warnings from the kernel. This was due to the fstype
being 'auto', so the kernel objected to options not being applicable to
every filesystem it tried before ending up with extfs:
squashfs: Unknown parameter 'commit'
vfat: Unknown parameter 'commit'
exfat: Unknown parameter 'commit'
fuseblk: Unknown parameter 'commit'
btrfs: Unknown parameter 'errors'
This commit explicitly sets aux to ext2, and the others to ext4, and it
now checks before calling tune2fs that the partition/disk image is ext4.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Please note, this change drops not only the global enabled flag, but also the
per-interface enabled flag, converting it to a presence container. The name
of the container is also shortened from dhcp-client -> dhcp. A pattern that
expected to be reused also for the DHCPv6 client.
Fixes#1109
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reduce /var image size to 128M (resized at first boot anyway) and tune
mke2fs options for faster mounting. Set ext4 'uninit_bg' feature and
use '-m 0 -i 4096' extraargs in genimage to optimize filesystem creation
and reduce overhead. The genimage tool has several tweaks enabled by
default already, the 'uninit_bg' feature speeds up the time to check
the file system.
Disable periodic fsck with tune2fs at boot while keeping safety checks
intact. Adjust mount options in fstab to reduce journal syncs and
improve boot time.
Fix severe performance regression in find_partition_by_label() that was
calling sgdisk on every block device including virtual devices (ram, loop,
dm-mapper). This caused boot delays of up to 24 seconds on systems with
many block devices. Now skip virtual devices that don't have GPT tables,
reducing the delay to ~2 seconds.
Also clean up is_mmc() function to use cached result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates mkimage.sh scripts into a unified SD card image
creation tool that works for all boards. It needs a bootloader an $ARCH
rootfs.squashfs image and a genimage.cfg.in template.
- Detects build directories from `O=` environment variable or `output/`
- Sources `.config` to discover Buildroot paths
- Uses Buildroot's `support/scripts/genimage.sh` when available
- Automatically generates `.bmap` files if `bmaptool` is available
- Fallback to direct `genimage` invocation if wrapper not found
See the online instructions for usage.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add new interface quirk to allow skipping disabling of flow control on
all RPi 3B/4B devices that have the smsc95xx driver.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Enable bridging of LAN ports in br0, default IP: 192.168.0.1/24
- Enable firewall with two zones: 'wan' and 'lan', policy: lan-to-wan
- Enable DHCP server on br0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops the board specific defconfig in favor of proper BSP
support for the FriendlyARM NanoPi R2S to Infix as part of the default
Aarch64 build.
The name FriendlyARM was elected over FriendlyELEC ("new" name) to be
consistent with both kernel and Buildroot naming standards.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates all BSP support files into the Buildroot standard
board/ directory. The concept of selectable boards in menuconfig remains
as-is but now lives in board/ instead.
Drop support for board-specific post-build.sh scripts, not needed atm. and
we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files
instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the additional support for RPi3, including Zero 2W, this commit renames
all relevant directories and Config.In options to match.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The DWC2 controller is a very common IP block in ARM and RiscV SoCs. With the
USB subsystem back to a built-in we can now enable host mode for the DWC2 (USB
2.0) ports on RPi. It also opens up for merging the NanoPi R2S into the
generic aarch64 build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On some boards, and in particular with a hybrid mbr/gpt partition table,
like on the RPi64, we must resize ext *after* reboot.
Also, do some cleanup and consolidation of error handling to prevent us
from entering an endless boot loop.
Follow-up to 391e9715
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit refactors USB port probing to:
- Eliminate duplicates: previously, 'authorized' and 'authorized_default'
were listed as separate USB port entries (confusing). Now each USB
port is represented once, with the path pointing to the USB device
directory, confd appends the appropriate attribute file as needed
- Add support for Raspberry Pi 4B and CM4 USB port(s) using a generic
discovery function that scans /sys/bus/usb/devices for USB root hubs.
This should work seamlessly across all platforms
- For backwards compatibility and better UX:
- Single USB port systems: Named "USB" (no number)
- Multi-port systems: Named "USB1", "USB2", etc.
- Device tree-based discovery is tried first (for boards like Alder with
explicit DT USB port definitions), with fallback to generic discovery
for boards without DT
Fixes: #315
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Use kernel cmdline option 'usbcore.authorized_default=2' to lock all
external/user-visible USB ports by default.
The kernel distinguishes internal vs external USB ports using ACPI
methods (_UPC and _PLD) on x86/x86_64 systems. On ACPI systems, ports
marked as non-visible but connectable are considered internal (e.g.,
hard-wired USB-to-Ethernet adapters) and are automatically authorized,
while user-visible external ports require manual authorization.
However, on device tree systems the kernel lacks a standard mechanism
for identifying internal ports. The 'authorized_default=2' setting falls
back to requiring authorization for all devices on these platforms,
We list user-accessible USB ports in the device tree ('usb-ports' and
'usb-port-names'), with unlisted ports being implicitly internal and
managed separately.
Fixes#1065
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Shell script:
- Factor out big portions of code into more logical helper functions
- Simplify calling setup script by checking for remote image first
- Simplify meta/sha up-to-date handling and clarify terminology
- Consistent use of -f instead of -e in file-exists checks
- Fix unsafe use of 'mktemp -u'
C code:
- Clarify meta/sha terminology: rename meta-sha256 -> meta-image-sha256
- Refactor weird archive_offset() function to local_path() helper
- Factor out helper function calc_sha()
- Check len of sha256 >= 64
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
One unique feature of Infix OS is that you can embed your OCI archive in
the rootfs.squashfs. This way your container instance does not need to
download anything from the network. To upgrade you drop in a new image
and rebuild Infix, when the new Infix boots the container script 'setup'
command will recognize that the OCI archive has changed and will reload
it into the container store.
This patch is an improvement of the way too generic 'podman image prune'
command used previously. Instead of looking for any dangling image, we
now surgically remove the old image.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Container instances that run with mutable images, e.g., tagged with `:latest`
or similar non-versioned tags, can be upgraded without changing the config.
This commit fixes two issues found with this support:
- force container image re-fetch on upgrade, even if the file exists locally
- surgically remove old image from container store after upgrade
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Usually, when your system is up and running properly, you want to clean
up anything unused from your previous experiments. This change alllows
that by calling the interactive 'podman image prune -a -f' command from
the CLI command 'container remove all'
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When loading big OCI images at boot the `podman load` process completely
monopolizes all cores of an Arm Cortex-A72. It blocks on I/O, sure, but
with 'nice' we can get some attention at least to more critical services
at boot.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit reverts 477f7ae and bb19d06, which intended to fix an issue
with lingering old images, see #1098. However, as detailed in #1147,
this caused severe side effects while working with multiple larger
containers. Basically, the prune operation of one container removed
images of other containers that are just being created in parallel.
Instead of using the podman prune command we can use the meta datain the
start script to pinpoint exactly which image(s) to remove, including any
downloaded OCI archives when the container instance is removed.
Fixes#1147
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds metadata to track loaded OCI archives to allow skipping
'delete + load' of OCI images when restarting either the container or the
system as a whole. The sha256 of all loaded OCI archives is stored in a
sidecar file in our downloads directory. Then we verify the checksum of
the OCI archives against their same-named sidecar to determine if the OCI
archive is already loaded or not.
Additionally, the instance using the image is labled with metadata to detect
changes in the container configuration. This in turn allow skipping the
delete + create phase also of the instance.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The default timeout for 'podman stop foo' is 10 seconds, which for
heavily loaded systems with intricate shutdown process is *waaaay*
too short. Increase it to the container script default 30s, which
coincidentally is also the container@.conf template's kill delay.
Fixes#1149
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add supoprt for infix-firewall.yang, modeled on the zone-based firewalld
The terminology is a mix of firewalld, classic netfilter and inspired by
Ubiquity. E.g., zone 'policy' -> 'action', and the zone matrix overview.
- Port forwarding allows forwarding a range of ports
- Operational data comes from firewalld active rules
- Firewall logging goes to /var/log/firewall.log
- Show implicit/built-in rules and zones (HOST) in firewall matrix,
includes "locked" policy for the default-drop behavior
- The zone services field in admin-exec 'show firewall' shows ANY when
the zone default action is set to 'accept'
- Zone 'forwarding' and 'masquerade' settings live in Infix in the
policys instead, meaning users need to explicitly add a policy
to allow both intra-zone and inter-zone forwarding
- Support for emergency lockdown (kill switch)
- Pre-defined services (xml+enums) are filtered and included as a
separate YANG model, extensions added for netconf and restconf
- Includes initial support for firewalld rich rules
firewalld policy rules, including rich rules, have an obnoxious priority
field which is extremely hard to get right, so in Infix we use the far
superior YANG construct 'ordered-by user;'. This ensure all rules are
generated in that order by setting the priority field, on read-back from
firewalld (operational) the priority field is used to sort the output
of rules in the CLI.
Fixes#448
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In setups like this...
CPU
eth0
|
.----0----.
| dst0sw0 |
'-1-2-3-4-'
|
.----0----.
| dst1sw0 |
'-1-2-3-4-'
...both eth0 and dst0sw0p4 are DSA ports. But the latter is _also_ a
physical port as far as devlink is concerned. As a result, it would
first be marked as "internal" and is then instantly reclassified as a
"port".
Catch this condition and stick with the initial "internal"
classification.
In addition to matching on interface names, add support for matching
on ethtool information.
Example:
{
"@ethtool:driver=st_gmac": {
"broken-mqprio": true
}
}
This would mark any interface using the "st_gmac" driver as having a
broken mqprio implementation. Whereas this:
{
"@ethtool:driver=st_gmac;bus-info:30bf0000.ethernet": {
"broken-mqprio": true
}
}
Only matches an st_gmac-backed interface at the specified location.
As matching becomes more complicated, use the shell implementation
from confd as well, to make sure that they are always in agreement.
The rauc event logger is a separate glib logger that by default logs to
the system console, with annoying ANSI escape sequences. This commit
drops the default stdout/stderr redirect of these log messages and adds
a more exhaustive bundle install and event log, in json format, instead.
For more information about event logging, see the rauc documentation:
https://rauc.readthedocs.io/en/latest/advanced.html
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- cli: add '-r' to log/pager/follow for "raw" control chars, including unicode
- sysklogd: backport unicode fix for em-dash character (—) in slogan
- sysklogd: drop old patches
- sysklogd: run in 8-bit safe mode
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add HISTCONTROL=ignoreboth to ignore duplicate commands and those
starting with space, enable histappend, and improve tab completion
behavior. Also add /etc/inputrc for better readline key bindings.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The Banana Pi R3 is a high-performance networking board featuring:
- MediaTek MT7986 ARM Cortex-A53 quad-core processor
- 4x Gigabit LAN ports (lan1-lan4)
- 1x Gigabit WAN port
- 2x SFP ports (sfp1, sfp2) for fiber connectivity
- Dual WiFi interfaces (wifi0 for 2.4GHz, wifi1 for 5GHz)
- USB support
- SD card boot support
The motd-banner was behind on the new slogan:
.-------.
| . . | Infix OS — Immutable.Friendly.Secure
|-. v .-| https://kernelkit.org
'-'---'-'
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When a container's image is on an inaccessible remote server, the
container wrapper script waits in the background for any netowrk
changes to retry download of the image.
This change avoids the dangerous previous construct, and is also
easier to read: timeuot after 60 seconds unless ip monitor reads
at least one event before that.
Fixes#1124
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The extended kill delay (10 sec) is sometimes not enough for complex
system containers. Also, podman sometimes take the opportunity to do
housekeeping tasks when stopping a container. So, allow for up to 30
sec. grace period before we send SIGKILL.
With the latest image prune extension, set a 60 sec. timeout for the
cleanup task, in case podman gets stuck. This to prevent any future
mishaps.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg