This fixes the annoying libyang warning after commit da29771.
confd[3375]: libyang[0]: Invalid argument ctx_node (lyd_find_xpath()).
This happens when the diff is used in the wrong event when it is NULL.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Check if partition/LABEL is available before trying to run tune2fs and
mount commands on it. This change masks the kernel output:
LABEL=var: Can't lookup blockdev
commne when running `make run` on x86_64 builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 45efa94 we introduced new mount options for the: 'aux', 'cfg', and
'var' partitions. To save boot time, we also disabled the periodic fsck
check, which does not affect journal replay or other Ext4 safety or
integrity checks. The latter involved calling tune2fs at runtime, but
this caused the following to appear for the 'aux' partition, which is an
ext2 for systems that need to change U-Boot settings, e.g., to set MAC
address on systems without a VPD.
EXT4-fs: Mount option(s) incompatible with ext2
To make matters worse, the new mount option(s), e.g., 'commit=30', gave
us another set of warnings from the kernel. This was due to the fstype
being 'auto', so the kernel objected to options not being applicable to
every filesystem it tried before ending up with extfs:
squashfs: Unknown parameter 'commit'
vfat: Unknown parameter 'commit'
exfat: Unknown parameter 'commit'
fuseblk: Unknown parameter 'commit'
btrfs: Unknown parameter 'errors'
This commit explicitly sets aux to ext2, and the others to ext4, and it
now checks before calling tune2fs that the partition/disk image is ext4.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Neither the IPv6 autonconf container, nor the recently moved DHCP client
container have an 'enabled' flag.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Please note, this change drops not only the global enabled flag, but also the
per-interface enabled flag, converting it to a presence container. The name
of the container is also shortened from dhcp-client -> dhcp. A pattern that
expected to be reused also for the DHCPv6 client.
Fixes#1109
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Reduce /var image size to 128M (resized at first boot anyway) and tune
mke2fs options for faster mounting. Set ext4 'uninit_bg' feature and
use '-m 0 -i 4096' extraargs in genimage to optimize filesystem creation
and reduce overhead. The genimage tool has several tweaks enabled by
default already, the 'uninit_bg' feature speeds up the time to check
the file system.
Disable periodic fsck with tune2fs at boot while keeping safety checks
intact. Adjust mount options in fstab to reduce journal syncs and
improve boot time.
Fix severe performance regression in find_partition_by_label() that was
calling sgdisk on every block device including virtual devices (ram, loop,
dm-mapper). This caused boot delays of up to 24 seconds on systems with
many block devices. Now skip virtual devices that don't have GPT tables,
reducing the delay to ~2 seconds.
Also clean up is_mmc() function to use cached result.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds support to simplify sdcard.img generation by downloading the
latest bootloader build for a board from the 'latest-boot' release tag. The
tarball is saved in dl/bootloader/ and is extracted to a temporary directory
in output/build/boot-$board-xxxx on every invocation of mkimage.sh. This is
used for invoking genimage and bmaptool before copying the resulting images
to output/images/. (If $O is set, it is used instead of output/, above).
New options:
-d Download latest bootloader build for the given board
-f Force re-download even if bootlaoder tarball existgs
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Update board paths to match the restructuring in commit ab56c1be.
Fixes rpi4, cn9130_crb, and aarch64_qemu bootloader builds.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Wrap wpa_cli operations in try-except blocks to ensure WiFi errors don't
cause sysrepocfg to fail. Interface queries now return data for working
interfaces even when WiFi has issues.
Fixes:
admin@rpi-79-41-1d:/> show interfaces
Error running sysrepocfg: Command '['sysrepocfg', '-f', 'json', '-X', '-d', 'operational', '-x', '/ietf-interfaces:interfaces']' returned non-zero exit status 1.
No interface data retrieved.
admin@rpi-79-41-1d:/>
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates mkimage.sh scripts into a unified SD card image
creation tool that works for all boards. It needs a bootloader an $ARCH
rootfs.squashfs image and a genimage.cfg.in template.
- Detects build directories from `O=` environment variable or `output/`
- Sources `.config` to discover Buildroot paths
- Uses Buildroot's `support/scripts/genimage.sh` when available
- Automatically generates `.bmap` files if `bmaptool` is available
- Fallback to direct `genimage` invocation if wrapper not found
See the online instructions for usage.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add new interface quirk to allow skipping disabling of flow control on
all RPi 3B/4B devices that have the smsc95xx driver.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The xPi's usually don't have a VPD so the chassis mac-address probed at
boot is usually null in /run/system.json. This commit adds a fallbkack
mechanism to populate this field so it can be used for unique hostnames
even on these boards.
Ths ietf-hardware.yang model does not have a notion of physical address,
so we augment one tht is generic enought to be used for other hardware
components than Ethernet, similar to what ietf-interfaces.yang use.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Enable bridging of LAN ports in br0, default IP: 192.168.0.1/24
- Enable firewall with two zones: 'wan' and 'lan', policy: lan-to-wan
- Enable DHCP server on br0
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops the board specific defconfig in favor of proper BSP
support for the FriendlyARM NanoPi R2S to Infix as part of the default
Aarch64 build.
The name FriendlyARM was elected over FriendlyELEC ("new" name) to be
consistent with both kernel and Buildroot naming standards.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit consolidates all BSP support files into the Buildroot standard
board/ directory. The concept of selectable boards in menuconfig remains
as-is but now lives in board/ instead.
Drop support for board-specific post-build.sh scripts, not needed atm. and
we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files
instead.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With the additional support for RPi3, including Zero 2W, this commit renames
all relevant directories and Config.In options to match.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For more advanced hardware with multiple sensor types per device
(e.g., SFP modules with temperature, voltage, current, and power
sensors), use the YANG parent/child relationship to group related
sensors together for better presentation.
Changes:
- Remove parent/parent-rel-pos deviations from infix-hardware.yang
- Create parent components (class: module) for multi-sensor devices
- Add parent references to child sensor components
- Add human-readable descriptions from hwmon labels
- Extend hwmon discovery to support voltage, current, and power
- Normalize sensor names: strip vendor prefixes (mt7915_phy0 -> phy0)
- Remove redundant TYPE column, clarify units (V -> VDC, add spaces)
- Simplify child sensor display by stripping parent prefix
- Fix "show system" to only show CPU temperature and fan speed
Example output from "show hardware":
NAME VALUE STATUS
===================================================
sfp1:
Rx Power 0.000 W ok
Tx Power 0.001 W ok
Vcc 3.35 VDC ok
Bias 0.006 A ok
Temperature 30.3 °C ok
sfp2:
Rx Power 0.000 W ok
Tx Power 0.001 W ok
Vcc 3.34 VDC ok
Bias 0.006 A ok
Temperature 32.0 °C ok
cpu 42.8 °C ok
phy0 47.0 °C ok
phy1 53.0 °C ok
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds resource usage: memory, loadavg, and filesystem usage
by augmenting ietf-system:/system-state.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Remove class deviation to allow iana-hardware:sensor
- Populate sensor operational data from /sys/class/thermal
- Extend 'show hardware'
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Usually, when upgrading a system, you want to reboot it so the upgrade
takes effect. This commit adds a 'reboot' option/flag, alongside the
'force' option, to facilitate this.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The DWC2 controller is a very common IP block in ARM and RiscV SoCs. With the
USB subsystem back to a built-in we can now enable host mode for the DWC2 (USB
2.0) ports on RPi. It also opens up for merging the NanoPi R2S into the
generic aarch64 build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
On some boards, and in particular with a hybrid mbr/gpt partition table,
like on the RPi64, we must resize ext *after* reboot.
Also, do some cleanup and consolidation of error handling to prevent us
from entering an endless boot loop.
Follow-up to 391e9715
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit refactors USB port probing to:
- Eliminate duplicates: previously, 'authorized' and 'authorized_default'
were listed as separate USB port entries (confusing). Now each USB
port is represented once, with the path pointing to the USB device
directory, confd appends the appropriate attribute file as needed
- Add support for Raspberry Pi 4B and CM4 USB port(s) using a generic
discovery function that scans /sys/bus/usb/devices for USB root hubs.
This should work seamlessly across all platforms
- For backwards compatibility and better UX:
- Single USB port systems: Named "USB" (no number)
- Multi-port systems: Named "USB1", "USB2", etc.
- Device tree-based discovery is tried first (for boards like Alder with
explicit DT USB port definitions), with fallback to generic discovery
for boards without DT
Fixes: #315
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit adds support for the Raspberry Pi CM4 based mini DFRobot IoT
Router board, SKU:DFR0767. It comes with an additional RTL8111 PCIe NIC
hence the addidtional kernel module and firmware. The latter fixes:
r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
r8169 0000:01:00.0: Unable to load firmware rtl_nic/rtl8168h-2.fw (-2)
Please note, the change in BCMGENET from module to built-in is to ensure
it is probed before any PCIe NIC, both this board and the CM4-based NVME
NAS base board enumerate the built-in MAC as eth0.
Also, unlike the RPi 3B/4B, it is not a given fact that a CM4 based board
comes with WiFi onboard, and since most compute module setups are DYI, we
take the easy way out and leave it as an exercise to the user to add WiFi
interface to the config.
https://wiki.dfrobot.com/Compute_Module_4_IoT_Router_Board_Mini_SKU_DFR0767
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg