peter/infix
1
0
Fork 0
mirror of https://github.com/kernelkit/infix.git synced 2026-07-31 13:03:02 +02:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #814 from kernelkit/doc-ospf-redistribute

Browse Source 
Add rudimentary documentation on global OSPF settings

Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit is contained in:
Joachim Wiberg
2024-11-08 08:58:24 +01:00
committed by GitHub
parent 20295b08b5 e9aefc517f
commit e0458ca079
2 changed files with 34 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files
doc/ChangeLog.md
+2
View File
@@ -25,6 +25,8 @@ All notable changes to the project are documented in this file.
- Updated Discovery documentation with information on `infix.local`
mDNS alias, `netbrowse` support to discover *all* local units, and
command examples for disabling LLDP and mDNS services, issue #786
- Updated OSPF documentation to include information on *global OSPF
settings* (`redistribution`, `explicit-router-id`, etc.), issue #812
### Fixes
- Fix #685: DSA conduit interface not always detected, randomly causing
doc/networking.md
+32
View File
@@ -1011,6 +1011,38 @@ an Ethernet interface can be done as follows.
admin@example:/config/routing/control-plane-protocol/ospfv2/name/default/ospf/area/0.0.0.0/interface/e0/> set interface-type point-to-point
admin@example:/config/routing/control-plane-protocol/ospfv2/name/default/ospf/area/0.0.0.0/interface/e0/>
#### OSPF global settings
In addition to *area* and *interface* specific settings, OSPF provides
global settings for route redistribution and OSPF router identifier.
```
admin@example:/config/> edit routing control-plane-protocol ospfv2 name default ospf
admin@example:/config/routing/control-plane-protocol/ospfv2/name/default/ospf/> set ?
area List of OSPF areas.
default-route-advertise Distribute default route to network
explicit-router-id Defined in RFC 2328. A 32-bit number
redistribute Redistribute protocols into OSPF
admin@example:/config/routing/control-plane-protocol/ospfv2/name/default/ospf/> set
```
- Explicit router ID: By default the router will pick an IP address
from one of its OSPF interfaces as OSPF router ID. An explicit ID is
used to get a deterministic behavior, e.g., `set explicit-router-id
1.1.1.1`.
- Redistribution: `set redistribute static` and `set redistribute connected`
can be used to include static or connected routes into the OSPF routing
domain. These routes are redistributed as *external type-2* (E2)
routes.
- Advertising default route: An OSPF router can be made to distribute
a default route into the OSPF domain by command `set
default-route-advertise enabled`. This route is distributed as long
as the router itself has an *active* default route in its routing
table. By adding command `set default-route-advertise always` the
router will distribute a default route even when it lacks a default
route. The default route will be distributed as an *external type-2*
(E2) route.
#### Debug OSPFv2