board/aarch64: alder: Remove Micro-SD support

There is no Micro-SD slot on the alder board. Not even an
optional one.
This commit is contained in:
Henrik Nordstrom
2024-01-29 18:05:07 +01:00
committed by Joachim Wiberg
parent 6d0f666ae1
commit 4c5d5fb045
-47
View File
@@ -196,53 +196,6 @@
};
/* CP SDHCI (Micro-SD) */
/ {
cp0_reg_sd_vccq: cp0_sd_vccq@0 {
compatible = "regulator-gpio";
regulator-name = "cp0_sd_vccq";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
/* gpios = <&CP_SD_HST_18_EN>; */
states = <1800000 0x1
3300000 0x0>;
};
cp0_reg_sd_vcc: cp0_sd_vcc@0 {
compatible = "regulator-fixed";
regulator-name = "cp0_sd_vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* gpio = <&CP_SD_CRD_PWR_OFF>; */
enable-active-high;
regulator-always-on;
};
};
&cp0_pinctrl {
cp0_sdhci_pins: cp0-sdhi-pins-0 {
marvell,pins = \
CP_SD_CRD_PWR_OFF(MPP_ID), CP_SD_HST_18_EN(MPP_ID), \
CP_SD_CRD_DT(MPP_ID), CP_SD_LED(MPP_ID), \
CP_SD_CLK(MPP_ID), CP_SD_CMD(MPP_ID), \
CP_SD_D0(MPP_ID), CP_SD_D1(MPP_ID), \
CP_SD_D2(MPP_ID), CP_SD_D3(MPP_ID);
marvell,function = "sdio";
};
};
&cp0_sdhci0 {
status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&cp0_sdhci_pins>;
bus-width = <4>;
/* cd-gpios = <&CP_SD_CRD_DT>; */
vqmmc-supply = <&cp0_reg_sd_vccq>;
vmmc-supply = <&cp0_reg_sd_vcc>;
};
/* SPI1 (Boot FLASH) */
&cp0_pinctrl {