Merge pull request #723 from kernelkit/verify-iface-status

Verify Interface Status
This commit is contained in:
Ahmed Karic
2024-10-17 10:27:10 +02:00
committed by GitHub
12 changed files with 209 additions and 66 deletions
+2
View File
@@ -38,3 +38,5 @@ include::static_multicast_filters/Readme.adoc[]
include::vlan_qos/Readme.adoc[]
include::verify_all_interface_types/Readme.adoc[]
include::iface_enable_disable/Readme.adoc[]
@@ -55,3 +55,6 @@
- name: verify_all_interface_types
case: verify_all_interface_types/test.py
- name: iface_enable_disable
case: iface_enable_disable/test.py
@@ -0,0 +1,31 @@
=== Interface status
==== Description
Verify interface status properly propagate changes when an interface
is disabled and then re-enabled.
Both admin-status and oper-status are verified.
==== Topology
ifdef::topdoc[]
image::../../test/case/ietf_interfaces/iface_enable_disable/topology.png[Interface status topology]
endif::topdoc[]
ifndef::topdoc[]
ifdef::testgroup[]
image::iface_enable_disable/topology.png[Interface status topology]
endif::testgroup[]
ifndef::testgroup[]
image::topology.png[Interface status topology]
endif::testgroup[]
endif::topdoc[]
==== Test sequence
. Set up topology and attach to target DUTs
. Configure bridge and associated interfaces in target1
. Disable interface in target2
. Verify the interface is disabled
. Enable the interface and assign an IP address
. Verify the interface is enabled
. Verify it is possible to ping the interface
<<<
+105
View File
@@ -0,0 +1,105 @@
#!/usr/bin/env python3
"""
Interface status
Verify interface status properly propagate changes when an interface
is disabled and then re-enabled.
Both admin-status and oper-status are verified.
"""
import infamy
import infamy.iface as iface
from infamy import until
def print_error_message(iface, param, exp_val, act_val):
return f"'{param}' failure for interface '{iface}'. Expected '{exp_val}', Actual: '{act_val}'"
def assert_param(target, interface, parameter, expected_value):
def check_param():
actual_value = iface.get_param(target, interface, parameter)
if actual_value is None:
raise ValueError(f"Failed to retrieve '{parameter}' for interface '{interface}'")
return actual_value == expected_value
until(check_param)
actual_value = iface.get_param(target, interface, parameter)
assert (expected_value == actual_value), print_error_message(
iface=interface,
param = parameter,
exp_val = expected_value,
act_val = actual_value
)
def configure_interface(target, iface_name, iface_type=None, enabled=True, ip_address=None, bridge=None):
interface_config = {
"name": iface_name,
"enabled": enabled
}
if iface_type:
interface_config["type"] = iface_type
if ip_address:
interface_config["ipv4"] = {
"address": [
{
"ip": ip_address,
"prefix-length": 24
}]}
if bridge:
interface_config["infix-interfaces:bridge-port"] = {
"bridge": bridge
}
target.put_config_dict( "ietf-interfaces", {
"interfaces": {
"interface": [
interface_config
]}})
with infamy.Test() as test:
with test.step("Set up topology and attach to target DUTs"):
env = infamy.Env()
target1 = env.attach("target1", "mgmt")
target2 = env.attach("target2", "mgmt")
_, data1 = env.ltop.xlate("target1", "data")
_, link1 = env.ltop.xlate("target1", "link")
_, iface_under_test = env.ltop.xlate("target2", "link")
_, host_send_iface = env.ltop.xlate("host", "data")
_bridge = "br_0"
target_address = "10.10.10.2"
host_address = "10.10.10.1"
with test.step("Configure bridge and associated interfaces in target1"):
configure_interface(target1, _bridge, enabled=True, iface_type="infix-if-type:bridge")
configure_interface(target1, data1, enabled=True, bridge=_bridge)
configure_interface(target1, link1, enabled=True, bridge=_bridge)
with test.step("Disable interface in target2"):
configure_interface(target2, iface_under_test, enabled=False)
with test.step("Verify the interface is disabled"):
assert_param(target2, iface_under_test, "admin-status", "down")
assert_param(target2, iface_under_test, "oper-status", "down")
with test.step("Enable the interface and assign an IP address"):
configure_interface(target2, iface_under_test, enabled=True, ip_address=target_address)
with test.step("Verify the interface is enabled"):
assert_param(target2, iface_under_test, "admin-status", "up")
assert_param(target2, iface_under_test, "oper-status", "up")
with infamy.IsolatedMacVlan(host_send_iface) as send_ns:
with test.step("Verify it is possible to ping the interface"):
send_ns.addip(host_address)
send_ns.must_reach(target_address)
test.succeed()
@@ -0,0 +1,35 @@
graph "2x4" {
layout="neato";
overlap="false";
esep="+40";
node [shape=record, fontname="monospace"];
edge [color="cornflowerblue", penwidth="2"];
host [
label="host | { <mgmt1> mgmt1 | <data> data | <mgmt2> mgmt2 }",
pos="0,15!",
kind="controller",
];
target1 [
label="{ <mgmt> mgmt | <data> data | <link> link } | { \n dut1 \n\n }",
pos="8,15!",
kind="infix",
];
target2 [
label="{ <link> link | <mgmt> mgmt } | { \n dut2 \n\n }",
pos="8,12!",
kind="infix",
];
host:mgmt1 -- target1:mgmt [kind=mgmt, color="lightgrey"]
host:data -- target1:data [color=black, fontcolor=black, taillabel="10.10.10.1/24"]
host:mgmt2 -- target2:mgmt [kind=mgmt, color="lightgrey"]
target1:link -- target2:link [color=black, fontcolor=black, headlabel="10.10.10.2/24"]
}
Binary file not shown.

After

Width:  |  Height:  |  Size: 20 KiB

@@ -30,7 +30,7 @@ def calc_mac(base_mac, mac_offset):
def reset_mac(tgt, port, mac):
"""Reset DUT interface MAC address to default."""
node = "infix-interfaces:custom-phys-address"
xpath = iface.get_iface_xpath(port, node)
xpath = iface.get_xpath(port, node)
tgt.delete_xpath(xpath)
with test.step("Verify target:data MAC address is reset to default"):
until(lambda: iface.get_phys_address(tgt, tport) == mac)
@@ -22,10 +22,10 @@ import infamy.iface as iface
def verify_interface(target, interface, expected_type):
assert iface.interface_exist(target, interface), f"Interface <{interface}> does not exist."
assert iface.exist(target, interface), f"Interface <{interface}> does not exist."
expected_type = f"infix-if-type:{expected_type}"
actual_type = iface._iface_get_param(target, interface, "type")
actual_type = iface.get_param(target, interface, "type")
if expected_type == "infix-if-type:etherlike" and actual_type == "infix-if-type:ethernet":
return # Allow 'etherlike' to match 'ethernet'
@@ -51,9 +51,9 @@ with infamy.Test() as test:
})
with test.step("Verify interfaces 'veth0a' and 'veth0b' exists"):
assert iface.interface_exist(target, veth0a), \
assert iface.exist(target, veth0a), \
f"Interface <{veth0a}> does not exist."
assert iface.interface_exist(target, veth0b), \
assert iface.exist(target, veth0b), \
f"Interface <{veth0b}> does not exist."
with test.step("Set IP address on target:eth0 (dummy op)"):
@@ -97,15 +97,15 @@ with infamy.Test() as test:
target = env.attach("target", "mgmt")
with test.step("Verify target:eth0 and target:eth1 still exist"):
assert iface.interface_exist(target, eth0), \
assert iface.exist(target, eth0), \
f"Interface {eth0} missing!"
assert iface.interface_exist(target, eth1), \
assert iface.exist(target, eth1), \
f"Interface {eth1} missing!"
with test.step("Verify VETH pair have been removed"):
assert not iface.interface_exist(target, veth0a), \
assert not iface.exist(target, veth0a), \
f"Interface <{veth0a}> still exists!"
assert not iface.interface_exist(target, veth0b), \
assert not iface.exist(target, veth0b), \
f"Interface <{veth0b}> still exists!"
test.succeed()
+15 -10
View File
@@ -4,26 +4,31 @@ VLAN ping connectivity
Very basic test if the VLAN interface configuration works.
"""
import infamy
import infamy.iface as iface
import copy
from infamy import until
def test_ping(hport, should_pass):
with infamy.IsolatedMacVlan(hport) as ns:
pingtest = ns.runsh("""
set -ex
with infamy.IsolatedMacVlan(hport) as ns:
try:
ns.runsh("""
set -ex
ip link set iface up
ip link add dev vlan10 link iface up type vlan id 10
ip addr add 10.0.0.1/24 dev vlan10
""")
ip link set iface up
ip link add dev vlan10 link iface up type vlan id 10
ip addr add 10.0.0.1/24 dev vlan10
""")
if(should_pass):
if should_pass:
ns.must_reach("10.0.0.2")
else:
ns.must_not_reach("10.0.0.2")
except Exception as e:
print(f"An error occurred during the VLAN setup or ping test: {e}")
raise
with infamy.Test() as test:
with test.step("Set up topology and attach to target DUT"):
env = infamy.Env()
@@ -60,7 +65,7 @@ with infamy.Test() as test:
})
with test.step("Waiting for links to come up"):
until(lambda: iface.get_oper_up(target, tport))
until(lambda: iface.get_param(target, tport, "oper-status") == "up")
with test.step("Ping 10.0.0.2 from VLAN 10 on host:data with IP 10.0.0.1"):
_, hport = env.ltop.xlate("host", "data")
+8 -46
View File
@@ -2,14 +2,14 @@
Fetch interface status from remote device.
"""
def get_iface_xpath(iface, path=None):
def get_xpath(iface, path=None):
"""Compose complete XPath to a YANG node in /ietf-interfaces"""
xpath=f"/ietf-interfaces:interfaces/interface[name='{iface}']"
if not path is None:
xpath=f"{xpath}/{path}"
return xpath
def _iface_extract_param(json_content, param):
def _extract_param(json_content, param):
"""Returns (extracted) value for parameter 'param'"""
interfaces = json_content.get('interfaces')
if not interfaces:
@@ -22,16 +22,16 @@ def _iface_extract_param(json_content, param):
return None
def _iface_get_param(target, iface, param=None):
def get_param(target, iface, param=None):
"""Fetch target dict for iface and extract param from JSON"""
content = target.get_data(get_iface_xpath(iface, param))
content = target.get_data(get_xpath(iface, param))
if content is None:
return None
return _iface_extract_param(content, param)
return _extract_param(content, param)
def interface_exist(target, iface):
def exist(target, iface):
"""Verify that the target interface exists"""
return _iface_get_param(target, iface, "name") is not None
return get_param(target, iface, "name") is not None
def address_exist(target, iface, address, prefix_length = 24, proto="dhcp"):
"""Check if 'address' is set on iface"""
@@ -56,47 +56,9 @@ def get_ipv4_address(target, iface):
return None
return ipv4['address']
def get_if_index(target, iface):
"""Fetch interface 'if-index' (operational status)"""
return _iface_get_param(target, iface, "if-index")
def get_oper_status(target, iface):
"""Fetch interface 'oper-status' (operational status)"""
return _iface_get_param(target, iface, "oper-status")
def get_phys_address(target, iface):
"""Fetch interface MAC address (operational status)"""
return _iface_get_param(target, iface, "phys-address")
def get_oper_up(target,iface):
state=get_oper_status(target,iface)
return state == "up"
def print_iface(target, iface):
data = target.get_data(_iface_xpath(iface, None))
print(data)
def print_all(target):
"""Print status parameters for all target interfaces"""
try:
content = target.get_dict("/ietf-interfaces:interfaces")
interfaces = content.get('interfaces')
if interfaces:
interface_list = interfaces.get('interface')
if interface_list and isinstance(interface_list, list):
col1 = "name"
col2 = "if-index"
col3 = "oper-status"
print('-'*36)
print(f"{col1: <12}{col2: <12}{col3: <12}")
print('-'*36)
for interface in interface_list:
print(f"{interface['name']: <12}"
f"{interface['if-index']: <12}"
f"{interface['oper-status']: <12}")
print('-'*36)
except:
print(f"Failed to get interfaces' status from target {target}")
return get_param(target, iface, "phys-address")
def exist_bridge_multicast_filter(target, group, iface, bridge):
# The interface array is different in restconf/netconf, netconf has a keyed list but
+1 -1
View File
@@ -374,7 +374,7 @@ class Device(Transport):
def get_iface(self, name):
"""Fetch target dict for iface and extract param from JSON"""
content = self.get_data(iface.get_iface_xpath(name))
content = self.get_data(iface.get_xpath(name))
interface = content.get("interfaces", {}).get("interface", None)
if interface is None: