Support new statistic endpoints // Remove unused multiplier options

We need to be able to handle floating point numbers right on the
boundary between two icons. This means our from..to configurations must
perfectly align at each end, and the algorithm to select those must not
be both less-than-or-equal (<=) AND more-than-or-equal (>=).

After this change:

  >>> get_icon_between(icon_states["battery_charge_level"], 0)
  'battery-alert-variant-outline'
  >>> get_icon_between(icon_states["battery_charge_level"], 9.9)
  'battery-alert-variant-outline'
  >>> get_icon_between(icon_states["battery_charge_level"], 10)
  'battery-10'
  >>> get_icon_between(icon_states["battery_charge_level"], 39)
  'battery-30'
  >>> get_icon_between(icon_states["battery_charge_level"], 39.9)
  'battery-30'
  >>> get_icon_between(icon_states["battery_charge_level"], 39.9999)
  'battery-30'
  >>> get_icon_between(icon_states["battery_charge_level"], 40)
  'battery-40'
  >>> get_icon_between(icon_states["battery_charge_level"], 99.99)
  'battery-90'
  >>> get_icon_between(icon_states["battery_charge_level"], 100)
  'battery'
  >>> get_icon_between(icon_states["battery_charge_level"], 101)
  'battery'

README.md

@@ -26,6 +26,7 @@ If you like my work:<br>
 - XC40 BEV (2022)
 - XC40 PHEV (2021)
 - V60 T8 PHEV (2023)
+- V60 T6 PHEV (2025)
 - C40 BEV (2023)
 - C40 BEV (2022)
 - C40 BEV (2024)
@@ -40,6 +41,7 @@ If you like my work:<br>
 - V90 PHEV T8 (2019)*
 - V90 PHEV T6 (2024)
 - V90 B5 Mildhybrid (2023)
+- EX40 BEV (2025)
 
 *only partly working
 
@@ -53,7 +55,7 @@ Please let me know if your car works with this addon so I can expand the list!<b
 - Sensor "Battery Capacity"
 - Sensor "Electric Range"
 - Sensor "Charging System Status"
-- Sensor "Charging Connection Status" (partly broken since 2.10 car update)
+- Sensor "Charging Connection Status"
 - Sensor "Estimated Charging Finish Time"
 - Sensor "Door Lock Status (All doors, tank lid, and engine hood)"
 - Sensor "Window Lock Status (All windows and sunroof - Thanks to @navet)"
@@ -124,7 +126,7 @@ The following steps are required for authentication in exactly this order:
 Just install this addon with the following command.
 Please note to fill in your settings inside the environment variables.
 
-`docker run -d --pull=always -e CONF_updateInterval=300 -e CONF_babelLocale='de' -e CONF_mqtt='@json {"broker": "", "username": "", "password": "", "port": 1883}' -e CONF_volvoData='@json {"username": "", "password": "", "vin": "", "vccapikey": ["key1", "key2"], "odometerMultiplier": 1, "averageSpeedDivider": 1, "averageFuelConsumptionMultiplier": 1}' -e TZ='Europe/Berlin' --name volvo2mqtt ghcr.io/dielee/volvo2mqtt:latest`
+`docker run -d --pull=always -e CONF_updateInterval=300 -e CONF_babelLocale='de' -e CONF_mqtt='@json {"broker": "", "username": "", "password": "", "port": 1883}' -e CONF_volvoData='@json {"username": "", "password": "", "vin": "", "vccapikey": ["key1", "key2"]}' -e TZ='Europe/Berlin' --name volvo2mqtt ghcr.io/dielee/volvo2mqtt:latest`
 
 <b>HA Add-On:</b><br>
 
@@ -144,9 +146,6 @@ Here is what every option means:
 | `CONF_volvoData`          | `json`    | `password`                            | **required** | Your password to login into the Volvo App.
 | `CONF_volvoData`          | `json`    | `vin`                                 | optional     | A single VIN like "VIN1" or a list of VINs like "["VIN1", "VIN2"]". Leave this empty if you don't know your VIN. The addon will use every car that is tied to your account.
 | `CONF_volvoData`          | `json`    | `vccapikey`                           | **required** | VCCAPIKEY linked with your volvo developer account. Get your Vccapi key from [here](https://developer.volvocars.com/account/). <b>Starting version 1.8.0, it is possible to define multiple keys, like this: `["vccapikey1", "vccapikey2", "vccapikey3", "etc..."]`</b>
-| `CONF_volvoData`          | `json`    | `odometerMultiplier`                  | optional     | The multiplier value for the odometer value, as the volvo api delivers inconsistent data. For some cars this setting is 10, for some 1. Try what's right for your car. If you leave it empty, the multiplier will be 1.
-| `CONF_volvoData`          | `json`    | `averageSpeedDivider`                 | optional     | The divider value for the average speed value, as the volvo api delivers inconsistent data. For some cars this setting is 10, for some 1. Try what's right for your car. If you leave it empty, the divider will be 1.
-| `CONF_volvoData`          | `json`    | `averageFuelConsumptionMultiplier`    | optional     | The multiplier value for the average fuel consumption value, as the volvo api delivers inconsistent data. For some cars this setting is 10, for some 1. Try what's right for your car. If you leave it empty, the multiplier will be 1.
 | `CONF_debug`              | `string`  |                                       | optional     | Debug option (true/false). Normally you don't need this. |
 | `TZ`                      | `string`  |                                       | **required** | Container timezone eg "Europe/Berlin" from [here](https://docs.diladele.com/docker/timezones.html)|
 

src/CHANGELOG.md

@@ -1,3 +1,16 @@
+## v1.10.0
+### 🚀 Features:
+- Remove unused multiplier options
+
+### 🐛 Bug Fixes:
+
+- Support new statistic keys #237
+
+## v1.9.7
+### 🐛 Bug Fixes:
+
+- Fix EX30 battery state #230
+
 ## v1.9.6
 ### 🐛 Bug Fixes:
 

src/Dockerfile

@@ -1,6 +1,9 @@
 ARG BUILD_FROM
 FROM $BUILD_FROM
 
+# Add community packets
+RUN echo -e "https://nl.alpinelinux.org/alpine/latest-stable/main\nhttps://nl.alpinelinux.org/alpine/latest-stable/community" > /etc/apk/repositories
+
 # Install requirements for add-on
 RUN apk add --no-cache python3 bash py3-pip
 
@@ -18,4 +21,4 @@ COPY / .
 RUN chmod a+x /volvoAAOS2mqtt/run.sh
 
 # command to run on container start
-CMD [ "/volvoAAOS2mqtt/run.sh" ]
+CMD [ "/volvoAAOS2mqtt/run.sh" ]

src/config.yaml

@@ -1,6 +1,6 @@
 name: "Volvo2Mqtt"
 description: "Volvo AAOS MQTT bridge"
-version: "1.9.6"
+version: "1.10.0"
 slug: "volvo2mqtt"
 init: false
 url: "https://github.com/Dielee/volvo2mqtt"
@@ -47,9 +47,6 @@ schema:
     vin: str?
     vccapikey:
         - match(^\b\w{32}\b$)
-    odometerMultiplier: int(1,)
-    averageSpeedDivider: int(1,)
-    averageFuelConsumptionMultiplier: int(1,)
 arch:
   - aarch64
   - amd64

src/const.py

@@ -1,6 +1,6 @@
 from config import settings
 
-VERSION = "v1.9.6"
+VERSION = "v1.10.0"
 
 OAUTH_TOKEN_URL = "https://volvoid.eu.volvocars.com/as/token.oauth2"
 OAUTH_AUTH_URL = "https://volvoid.eu.volvocars.com/as/authorization.oauth2"
@@ -75,17 +75,17 @@ icon_states = {
     "door_rear_right": {"ON": "car-door", "OFF": "car-door-lock"},
     "engine_state": {"ON": "engine-outline", "OFF": "engine-off-outline"},
     "battery_charge_level": [
-                    {"from": 100, "to": 100, "icon": "battery"},
-                    {"from": 99, "to": 90, "icon": "battery-90"},
-                    {"from": 89, "to": 80, "icon": "battery-80"},
-                    {"from": 79, "to": 70, "icon": "battery-70"},
-                    {"from": 69, "to": 60, "icon": "battery-60"},
-                    {"from": 59, "to": 50, "icon": "battery-50"},
-                    {"from": 49, "to": 40, "icon": "battery-40"},
-                    {"from": 39, "to": 30, "icon": "battery-30"},
-                    {"from": 29, "to": 20, "icon": "battery-20"},
-                    {"from": 19, "to": 10, "icon": "battery-10"},
-                    {"from": 9, "to": 0, "icon": "battery-alert-variant-outline"},
+                    {"from": float('inf'), "to": 100, "icon": "battery"},
+                    {"from": 100, "to": 90, "icon": "battery-90"},
+                    {"from": 90, "to": 80, "icon": "battery-80"},
+                    {"from": 80, "to": 70, "icon": "battery-70"},
+                    {"from": 70, "to": 60, "icon": "battery-60"},
+                    {"from": 60, "to": 50, "icon": "battery-50"},
+                    {"from": 50, "to": 40, "icon": "battery-40"},
+                    {"from": 40, "to": 30, "icon": "battery-30"},
+                    {"from": 30, "to": 20, "icon": "battery-20"},
+                    {"from": 20, "to": 10, "icon": "battery-10"},
+                    {"from": 10, "to": 0, "icon": "battery-alert-variant-outline"},
     ]
 }
 

src/util.py

@@ -57,7 +57,7 @@ def save_to_json(data, token_path):
 def get_icon_between(icon_list, state):
     icon = None
     for s in icon_list:
-        if s["to"] <= state <= s["from"]:
+        if s["to"] <= state < s["from"]:
             icon = s["icon"]
     return icon
 

src/volvo.py

@@ -551,7 +551,6 @@ def cached_request(url, method, vin, force_update=False, key_change=False):
 def parse_api_data(data, sensor_id=None):
     if sensor_id != "api_backend_status":
         data = data["data"]
-
     if sensor_id == "battery_charge_level":
         return data["batteryChargeLevel"]["value"] if util.keys_exists(data, "batteryChargeLevel") else None
     elif sensor_id == "battery_capacity":
@@ -588,14 +587,7 @@ def parse_api_data(data, sensor_id=None):
     elif sensor_id == "lock_status":
         return data["centralLock"]["value"] if util.keys_exists(data, "centralLock") else None
     elif sensor_id == "odometer":
-        multiplier = 1
-        if util.keys_exists(settings["volvoData"], "odometerMultiplier"):
-            multiplier = settings["volvoData"]["odometerMultiplier"]
-            if isinstance(multiplier, str):
-                multiplier = 1
-            elif multiplier < 1:
-                multiplier = 1
-        return util.convert_metric_values(int(data["odometer"]["value"]) * multiplier) \
+        return util.convert_metric_values(int(data["odometer"]["value"])) \
             if util.keys_exists(data, "odometer") else None
     elif sensor_id == "window_front_left":
         return window_states[data["frontLeftWindow"]["value"]] if util.keys_exists(data, "frontLeftWindow") \
@@ -643,30 +635,25 @@ def parse_api_data(data, sensor_id=None):
                 return fuel_amount
         return None
     elif sensor_id == "average_fuel_consumption":
+        average_fuel_con = 0
         if util.keys_exists(data, "averageFuelConsumption"):
             average_fuel_con = float(data["averageFuelConsumption"]["value"])
-            if average_fuel_con > 0:
-                multiplier = 1
-                if util.keys_exists(settings["volvoData"], "averageFuelConsumptionMultiplier"):
-                    multiplier = settings["volvoData"]["averageFuelConsumptionMultiplier"]
-                    if isinstance(multiplier, str):
-                        multiplier = 1
-                    elif multiplier < 1:
-                        multiplier = 1
-                return average_fuel_con * multiplier
+        elif util.keys_exists(data, "averageFuelConsumptionAutomatic"):
+            average_fuel_con = float(data["averageFuelConsumptionAutomatic"]["value"])
+
+        if average_fuel_con > 0:
+            return average_fuel_con
         return None
     elif sensor_id == "average_speed":
+        average_speed = 0
         if util.keys_exists(data, "averageSpeed"):
             average_speed = float(data["averageSpeed"]["value"])
-            if average_speed > 1:
-                divider = 1
-                if util.keys_exists(settings["volvoData"], "averageSpeedDivider"):
-                    divider = settings["volvoData"]["averageSpeedDivider"]
-                    if isinstance(divider, str):
-                        divider = 1
-                    elif divider < 1:
-                        divider = 1
-                return util.convert_metric_values(average_speed / divider)
+        elif util.keys_exists(data, "averageSpeedAutomatic"):
+            average_speed = float(data["averageSpeedAutomatic"]["value"])
+
+        if average_speed != 0:
+            return util.convert_metric_values(average_speed)
+
         return None
     elif sensor_id == "location":
         coordinates = {}
@@ -705,7 +692,15 @@ def parse_api_data(data, sensor_id=None):
     elif sensor_id == "service_warning_status":
         return data["serviceWarning"]["value"] if util.keys_exists(data, "serviceWarning") else None
     elif sensor_id == "average_energy_consumption":
-        return data["averageEnergyConsumption"]["value"] if util.keys_exists(data, "averageEnergyConsumption") else None
+        average_energy_con = 0
+        if util.keys_exists(data, "averageEnergyConsumption"):
+            average_energy_con = data["averageEnergyConsumption"]["value"]
+        elif util.keys_exists(data, "averageEnergyConsumptionAutomatic"):
+            average_energy_con = data["averageEnergyConsumptionAutomatic"]["value"]
+
+        if average_energy_con != 0:
+            return average_energy_con
+        return None
     elif sensor_id == "washer_fluid_warning":
         return data["washerFluidLevelWarning"]["value"] if util.keys_exists(data, "washerFluidLevelWarning") else None
     elif sensor_id == "warnings":