Files
infix/test/case/ietf_interfaces/igmp_vlan
Ahmed Karic 3e0b816351 test: Match on edge attributes when mapping topologies
Implemented logic to check if the system supports required services.
Logical edges with 'requires' fields are mapped only if physical edges
provide corresponding services. If not, the test is skipped.
This ensures that tests only run when the required services are available
in the test system configuration.

Fixes #654
2025-01-24 11:51:55 +01:00
..
2024-11-06 12:06:19 +01:00

=== IGMP VLAN
==== Description
Test tagged IGMP control traffic and that VLAN separation is respected for multicast

....
       VLAN55             VLAN77                          VLAN55              VLAN77
      10.0.1.1           10.0.2.1                       10.0.1.2            10.0.2.2
          \                /                               \                 /
           \--------------/        VLAN 1,2 T               \---------------/
           |    DUT1      +---------------------------------+      DUT2     |
           |              |dut1:link               dut2:link|               |
           +--------------+                                 +-----+---------+
 dut1:data1|              |dut1:data2                   dut2:data1|        |dut2:data2
  VLAN55 U |              | VLAN77 U                     VLAN55 U |        | VLAN77 U
           |              |                                       |        |
+-------+  |             +----------+                 +------------+       +--------+
| msend +--+             | mreceive |                 | mreceive   |       | msend  |
+-------+                +----------+                 +------------+       +--------+
 10.0.1.11                 10.0.2.11                      10.0.1.22         10.0.2.22
....

==== Topology
ifdef::topdoc[]
image::{topdoc}../../test/case/ietf_interfaces/igmp_vlan/topology.svg[IGMP VLAN topology]
endif::topdoc[]
ifndef::topdoc[]
ifdef::testgroup[]
image::igmp_vlan/topology.svg[IGMP VLAN topology]
endif::testgroup[]
ifndef::testgroup[]
image::topology.svg[IGMP VLAN topology]
endif::testgroup[]
endif::topdoc[]
==== Test sequence
. Set up topology and attach to target DUT
. Configure device
. Start multicast sender on host:data11, group 224.2.2.2
. Start multicast sender on host:data22, group 224.1.1.1
. Verify group 224.2.2.2 is flooded to host:data21
. Verify group 224.1.1.1 is flooded to host:data12
. Verify group 224.2.2.2 on host:data11, 224.1.1.1 on host:data21, 224.2.2.2 on host:data12 and 224.1.1.1 on host:data22 is not received
. Join multicast group 224.2.2.2 on host:data21
. Verify group 224.2.2.2 on host:data11, 224.1.1.1 on host:data21, 224.2.2.2 on host:data12 and 224.1.1.1 on host:data22 is not received
. Verify group 224.2.2.2 is forwarded to host:data21
. Verify group 224.1.1.1 is forwarded to host:data12


<<<