mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-30 20:43:02 +02:00
Joachim Wiberg
cfb8a8aa88
The Westermo querierd is an IGMP querier daemon for use on top of a standard Linux VLAN-aware bridge. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
32 lines
1.2 KiB
Plaintext
32 lines
1.2 KiB
Plaintext
# /etc/querierd.conf: default Infix configuration
|
|
|
|
# Query interval can be [1,1024], default 125. Recommended not go below 10
|
|
#query-interval 125
|
|
|
|
# The interval inside the query-interval that clients should respond
|
|
#query-response-interval 10
|
|
|
|
# Last member query interval [1,1024], default 1. The igmp-robustness
|
|
# setting controls the last member query count.
|
|
#query-last-member-interval 1
|
|
|
|
# Querier's robustness can be [2,10], default 2. Recommended to use 2
|
|
#robustness 2
|
|
|
|
# Controls the "other querier present interval", used to detect when an
|
|
# elected querier stops sending queries. Leave this commented-out, it
|
|
# is only available to override particular use-cases and interip with
|
|
# devices that do not follow the RFC. When commented out, the timeout
|
|
# is calculated from the query interval and robustness according to RFC.
|
|
#router-timeout 255
|
|
|
|
# IP Option Router Alert is enabled by default, for interop with stacks
|
|
# that hard-code the length of the IP header
|
|
#no router-alert
|
|
|
|
# Enable and one of the IGMP versions to use at startup, with fallback
|
|
# to older versions if older clients appear.
|
|
iface vlan1 enable igmpv3
|
|
#iface vlan2 enable igmpv3
|
|
#iface vlan3 enable igmpv3
|