mirror of
https://github.com/kernelkit/infix.git
synced 2026-08-02 05:43:02 +02:00
Joachim Wiberg
ab56c1be50
This commit consolidates all BSP support files into the Buildroot standard board/ directory. The concept of selectable boards in menuconfig remains as-is but now lives in board/ instead. Drop support for board-specific post-build.sh scripts, not needed atm. and we should really use Buildroot _POST_INSTALL_HOOKS in the board .mk files instead. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
68 lines
2.9 KiB
Makefile
68 lines
2.9 KiB
Makefile
# The CONFIG_REGULATOR_GPIO=y is load bearing for booting the RPi4 from
|
|
# SD card, see regulator-sd-io-1v8 in bcm2711-rpi-4-b.dts for details.
|
|
define RASPBERRYPI_RPI64_LINUX_CONFIG_FIXUPS
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SOUND)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SND)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SND_SOC)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_MOUSE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_KEYBOARD)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_INPUT_TOUCHSCREEN)
|
|
$(call KCONFIG_SET_OPT,CONFIG_INPUT_MOUSEDEV,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_HID_GENERIC,m)
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_BCM)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_BCM2835)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_ARCH_BRCMSTB)
|
|
$(call KCONFIG_SET_OPT,CONFIG_BCM2835_MBOX,y)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_BCM2835_WDT)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DMA_BCM2835)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_RASPBERRYPI_FIRMWARE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_PINCTRL_BCM2835)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_GPIO_BCM2835)
|
|
$(call KCONFIG_SET_OPT,CONFIG_BRCMFMAC,m)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_BRCMFMAC_SDIO)
|
|
$(call KCONFIG_SET_OPT,CONFIG_I2C_BCM2835,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_BCM2835_THERMAL,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_BCM2711_THERMAL,m)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_BCM2835)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_MMC_SDHCI_IPROC)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_RASPBERRYPI_POWER)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_CONSOLE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_BCM2835AUX)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_EXTENDED)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_SERIAL_8250_SHARE_IRQ)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_NET_VENDOR_BROADCOM)
|
|
$(call KCONFIG_SET_OPT,CONFIG_BCMGENET,y)
|
|
$(call KCONFIG_SET_OPT,CONFIG_R8169,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_REGULATOR_GPIO,y)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_COMMON_CLK_BCM2835)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_CLK_RASPBERRYPI)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_KMS_HELPER)
|
|
$(call KCONFIG_SET_OPT,CONFIG_DRM_V3D,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_DRM_VC4,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_STAGING,y)
|
|
$(call KCONFIG_SET_OPT,CONFIG_SND_BCM2835,m)
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_VC4_HDMI_CEC)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_LOAD_EDID_FIRMWARE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_PANEL_BRIDGE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_BRIDGE)
|
|
$(call KCONFIG_SET_OPT,CONFIG_DRM_TOSHIBA_TC358762,m)
|
|
$(call KCONFIG_SET_OPT,CONFIG_DRM_PANEL_SIMPLE,m)
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_FB)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_FRAMEBUFFER_CONSOLE)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY)
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_DRM_FBDEV_EMULATION)
|
|
|
|
$(call KCONFIG_SET_OPT,CONFIG_TOUCHSCREEN_EDT_FT5X06,m)
|
|
|
|
$(call KCONFIG_ENABLE_OPT,CONFIG_BACKLIGHT_CLASS_DEVICE)
|
|
endef
|
|
|
|
$(eval $(ix-board))
|
|
$(eval $(generic-package))
|