Ahmed KaricandMattias Walström 241f3f224f board/common: introduce image test-mode ...

To support testing, the test-config.cfg file has been introduced in Infix.
Additionally, a "test mode" for the running image is required for this
configuration to be applied.

Basically the test-config will only be loaded when the device is in test mode,
which is determined by the presence of the /mnt/aux/test-mode file.
However, placing this file via the Qeneth system proved to be
inconvenient in the test environment. Therefore, it the entire image is
built in test mode, with the 'test-mode' file preloaded onto the disk
image (specifically in the auxiliary partition).
To support this, a new variable, (bool) DISK_IMAGE_TEST_MODE, has been
introduced:

 enabled: the image will be built in the test mode;
 disabled: the image will be built in the standard mode.

Part of issue #568

2024-08-26 13:59:49 +02:00

..

aarch64

board/aarch64: styx: Source product data from VPD

2024-08-19 14:07:39 +02:00

common

board/common: introduce image test-mode

2024-08-26 13:59:49 +02:00

riscv64

board: quick fix for too small primary/secondary on sd cards

2024-08-16 16:47:28 +02:00

x86_64

board: add support for exFAT file systems

2024-08-04 07:42:44 +02:00