mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-28 11:43:01 +02:00
Joachim Wiberg
cf08b577ed
has_fix() only checks that fix-mode is set (2d/3d), but altitude and other fields may not yet be populated in the operational datastore when gpsd is still processing its first NMEA cycles after boot. Calling verify_position() immediately after has_fix() passes can therefore race and fail with: KeyError: 'altitude' This manifests reliably on the second GPS receiver (gps1) after reboot, because it is initialized slightly later than gps0 and hits the window where fix-mode is set but altitude has not yet appeared. not ok 11 - Verify gps1 position is near the coordinates # Traceback (most recent call last): # File "test/case/hardware/gps_simple/test.py", line 29, in verify_position # alt = float(state["altitude"]) # ~~~~~^^^^^^^^^^^^ # KeyError: 'altitude' Add has_position() to infamy/gps.py, which gates on fix-mode AND all position fields (latitude, longitude, altitude, satellites-used) being present. Replace the has_fix() polls in both the pre- and post-reboot verify steps with has_position(). Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
:testgroup: == Hardware Tests verifying hardware monitoring and management: - USB device detection and enumeration - Multiple USB port management and device handling - Watchdog reset capability include::usb/Readme.adoc[] include::usb_two_ports/Readme.adoc[] include::watchdog/Readme.adoc[]