mirror of
https://github.com/kernelkit/infix.git
synced 2026-08-01 05:13:01 +02:00
Joachim Wiberg
0229057612
The per-port PHY temperature sensors on Marvell DSA switches show up in 'show hardware' with the name the kernel derives from the full device tree path, e.g. cp0busbusf2000000mdio12a200switch2mdio01, which honestly is completely unreadable and also overruns the value column. Name each sensor after the front-panel port it serves (e1, e2, ...) by matching the PHY's device-tree phandle against each interface's phy-handle. Also: - show system: report a representative SoC temperature on CN913x by matching the ap-* and cp<N>-* thermal zones, hottest wins. - cli-pretty: truncate over-long sensor names so they can never spill into the value column again. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Introduction
Statd is designed to be integrated into Infix and supply the operational
database with data. To do this it uses companion binaries written in
python, these are located in the python directory.
Run outside Infix
Prerequisites
There are some requirements set on your computer to run statd locally.
- An Ubuntu based system
- lldpd
- python3
- libite
- libsrx
- python-poetry
- sysrepo (At least the same version as Infix)
- libyang (At least the same version as Infix)
Install YANG modules in local sysrepo
This requires that you first build Infix, since netopeer2 and sysrepo are responsible for installing their own YANG files.
user@host ~/infix$ export TARGET_DIR="output/target/"
user@host ~/infix$ export NETOPEER2_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/netopeer2/
user@host ~/infix$ export SYSREPO_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/sysrepo/
user@host ~/infix$ export LIBNETCONF2_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/libnetconf2/
user@host ~/infix$ export CONFD_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/confd/
user@host ~/infix$ export TEST_MODE_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/test-mode/
user@host ~/infix$ export ROUSETTE_SEARCHPATH=$TARGET_DIR/usr/share/yang/modules/rousette/
user@host ~/infix$ export SEARCH_PATH="$NETOPEER2_SEARCHPATH $SYSREPO_SEARCHPATH $LIBNETCONF2_SEARCHPATH $CONFD_SEARCHPATH $TEST_MODE_SEARCHPATH $ROUSETTE_SEARCHPATH"
user@host ~/infix$ ./utils/srload src/confd/yang/sysrepo.inc
user@host ~/infix$ ./utils/srload src/confd/yang/libnetconf2.inc
user@host ~/infix$ ./utils/srload src/confd/yang/netopeer2.inc
user@host ~/infix$ ./utils/srload src/confd/yang/confd.inc
user@host ~/infix$ ./utils/srload src/confd/yang/rousette.inc
user@host ~/infix$ ./utils/srload src/confd/yang/test-mode.inc
Build and install python companion binaries
user@host ~/infix/src/statd/python$ ./local_install.sh
This will install the binaries in ~/.local/bin
Build and install statd
user@host ~/infix/src/statd$ ./configure --with-yanger-dir=$HOME/.local/bin
user@host ~/infix/src/statd$ make
user@host ~/infix/src/statd$ sudo make install
Running statd
Since the yanger binary, for example, reads the shadow database, you
can expect different results if running statd as root or not.
user@host ~/infix/src/statd$ statd