mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-30 12:33:02 +02:00
Import ieee802-ethernet-interface@2025-09-10.yang, from IEEE 802.3.2-2025, and companion ieee802-ethernet-phy-type.yang, replacing the 2019 revision. Operational interface speed moves to ietf-interfaces:speed, RFC 8343, eth:speed is now obsolete. Bump infix-interfaces.yang revision to track the upgrade. The CLI 'show interface' command renders interfaces as bottom-up layered protocol rows. Ethernet interfaces a new IEEE link-mode row (1000baseT, 10GbaseLR, ...) is added with 'duplex: full|half' in the DATA column. Without link the ethernet row is the first row. Tunnels and wifi follow the same layering: gre/vxlan rows carry remote:/vni: tokens with optional ethernet sub-row for the L2-bearing variants; wifi rows carry 'station' or 'access-point' ssid:, signal:, stations: tokens. admin@bpi-76-8f-c2:/> show interface ⚑ INTERFACE PROTOCOL STATE DATA ⇅ lo loopback UP ipv4 127.0.0.1/8 (static) ipv6 ::1/128 (static) ⇅ br0 bridge DOWN │ ethernet 32:2e:3f:76:8f:c2 │ ipv4 192.168.0.1/24 (static) ⇅ ├ lan0 bridge LOWER-DOWN ⇅ ├ lan1 bridge LOWER-DOWN ⇅ ├ lan2 bridge LOWER-DOWN ⇅ └ lan3 bridge LOWER-DOWN ⇅ gre0 gre UP remote: 198.51.100.7 ipv4 10.255.0.1/30 (static) ⇅ sfp1 ethernet DOWN ca:59:f0:77:80:5b ⇅ wan 1000baseT UP duplex: full ethernet 32:2e:3f:76:8f:c2 ipv4 192.168.0.235/24 (dhcp) ipv6 fe80::302e:3fff:fe76:8fc2/64 (link-layer) ⇅ wan.10 vlan UP vid: 10 │ ipv4 10.0.10.1/24 (static) └ wan ⇅ wan.10.20 vlan UP vid: 20 │ ipv4 10.0.10.20/28 (static) └ wan.10 ⇅ wifi0 wifi UP station ssid: corp-net signal: good ethernet dc:a6:32:00:11:22 ipv4 192.168.7.42/24 (dhcp) yanger populates phy-type and pmd-type from a static ETHTOOL link-mode identity table keyed on (port, speed, duplex). Both leaves are populated for unambiguous media (copper, DAC, copper-T); for generic fiber where the (port, speed, duplex) tuple can map to multiple PMDs (SR vs LR vs ER, etc.) only the phy-type family identity is emitted — guessing the PMD would be misleading. cli_pretty prefers pmd-type (specific) and falls back to phy-type (family) for display. yanger also emits ietf-interfaces:speed and fixes a long-standing 'auto-negotation' typo (yanger had never matched ethtool's correctly- spelled JSON field, so operational auto-negotiation always read 'unknown'). Filling the WG's gap on fixed-speed config ------------------------------------------ IEEE Std 802.3.2-2025 obsoleted the eth:speed leaf without providing a config-true replacement; the standards-correct way to express what older Infix configurations called 'fixed speed' is to restrict the set of PMDs auto-negotiation may advertise. Augment auto-negotiation with two leaf-lists: auto-negotiation/advertised-pmd-types config-true, leaf-list of pmd-type ethernet/supported-pmd-types config-false, leaf-list of pmd-type Pinning a port to a single mode is now expressed as a single-entry advertised-pmd-types list. The kernel-supported set is exposed as operational state for diagnosis — SFP/SFP+ cages report the inserted module's capabilities, narrowing the list to a single PMD when the optic only supports one mode (as suggested by @wkz in PR review). When the supported list collapses to a single entry, yanger uses it to refine the operational pmd-type leaf — more accurate than the (port, speed, duplex) lookup for fiber. confd C apply path (src/confd/src/ieee802-ethernet-interface.c) translates each advertised pmd-type identity to the corresponding ETHTOOL_LINK_MODE_*_BIT_*, ORs them into a mask, and emits 'ethtool --change <if> autoneg on advertise 0x<mask>'. An empty list keeps the historical default of advertising every supported mode. The (legacy) 'auto-negotiation/enable = false' + speed/duplex branch is removed — it has no model representation any more. cli_pretty's detail view gains 'advertised' and 'supported' rows listing the PMDs in each set. A new _pr_label_list() helper unifies multi-row rendering across these new rows and the pre-existing ipv4/ipv6 address rows. The detailed interface view also gains a 'link mode' row carrying the pmd-type / phy-type-derived label. Migration of existing startup configurations -------------------------------------------- Bump confd version 1.8 → 1.9 to trigger the migration on upgrade. share/migrate/1.9/10-ethernet-advertise.sh translates old configs of the form ethernet { auto-negotiation { enable false; } speed S; duplex D; } into ethernet { auto-negotiation { advertised-pmd-types [PMD]; } duplex D; } mapping (S, D) → PMD via a static lookup covering the copper-T speeds the deprecated speed leaf historically supported (10/100/1000/2.5G/ 5G/10G). Interfaces that don't disable auto-negotiation, or that lack a speed leaf, are passed through untouched. Closes #530 Closes #805 Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
683 lines
16 KiB
JSON
683 lines
16 KiB
JSON
{
|
|
"ietf-interfaces:interfaces": {
|
|
"interface": [
|
|
{
|
|
"type": "infix-if-type:loopback",
|
|
"name": "lo",
|
|
"if-index": 1,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:00:00:00:00:00",
|
|
"statistics": {
|
|
"in-octets": "29943",
|
|
"out-octets": "29943"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"address": [
|
|
{
|
|
"ip": "127.0.0.1",
|
|
"prefix-length": 8,
|
|
"origin": "static"
|
|
}
|
|
]
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 65536,
|
|
"address": [
|
|
{
|
|
"ip": "::1",
|
|
"prefix-length": 128,
|
|
"origin": "static"
|
|
}
|
|
]
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e1",
|
|
"if-index": 2,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:01",
|
|
"statistics": {
|
|
"in-octets": "274021",
|
|
"out-octets": "2236951"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:301",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e2",
|
|
"if-index": 3,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:02",
|
|
"statistics": {
|
|
"in-octets": "2050",
|
|
"out-octets": "72419"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:302",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e3",
|
|
"if-index": 4,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:03",
|
|
"statistics": {
|
|
"in-octets": "13502",
|
|
"out-octets": "117434"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 1,
|
|
"bridge": "br0",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e4",
|
|
"if-index": 5,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:04",
|
|
"statistics": {
|
|
"in-octets": "11449",
|
|
"out-octets": "113004"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 1,
|
|
"bridge": "br0",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e5",
|
|
"if-index": 6,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:05",
|
|
"statistics": {
|
|
"in-octets": "31213",
|
|
"out-octets": "34316"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:305",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e6",
|
|
"if-index": 7,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:06",
|
|
"statistics": {
|
|
"in-octets": "48652",
|
|
"out-octets": "60687"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "10.1.1.101",
|
|
"prefix-length": 24,
|
|
"origin": "static"
|
|
}
|
|
]
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:306",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:ethernet",
|
|
"name": "e7",
|
|
"if-index": 8,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:07",
|
|
"statistics": {
|
|
"in-octets": "31741",
|
|
"out-octets": "34279"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:307",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"ieee802-ethernet-interface:ethernet": {
|
|
"auto-negotiation": {
|
|
"enable": false
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth0b",
|
|
"if-index": 11,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "e6:19:75:86:80:dd",
|
|
"statistics": {
|
|
"in-octets": "2013",
|
|
"out-octets": "34341"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 1,
|
|
"bridge": "br0",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth2b",
|
|
"if-index": 13,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "b2:fa:30:63:98:f0",
|
|
"statistics": {
|
|
"in-octets": "266",
|
|
"out-octets": "37752"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 1,
|
|
"bridge": "br0",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:bridge",
|
|
"name": "br0",
|
|
"if-index": 14,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "3213",
|
|
"out-octets": "38442"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "169.254.1.1",
|
|
"prefix-length": 16,
|
|
"origin": "random"
|
|
}
|
|
]
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"address": [
|
|
{
|
|
"ip": "fe80::2a0:85ff:fe00:300",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:bridge": {
|
|
"vlans": {
|
|
"proto": "ieee802-dot1q-types:c-vlan",
|
|
"vlan": [
|
|
{
|
|
"vid": 1,
|
|
"untagged": [
|
|
"br0",
|
|
"e3",
|
|
"e4",
|
|
"veth0b",
|
|
"veth2b"
|
|
],
|
|
"tagged": [],
|
|
"multicast": {
|
|
"snooping": true,
|
|
"querier": "off"
|
|
},
|
|
"multicast-filters": {
|
|
"multicast-filter": []
|
|
}
|
|
}
|
|
]
|
|
}
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 1
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth1b",
|
|
"if-index": 16,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "3e:67:0f:15:24:14",
|
|
"statistics": {
|
|
"in-octets": "726",
|
|
"out-octets": "812"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"pvid": 6,
|
|
"bridge": "br1",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth3b",
|
|
"if-index": 18,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "b2:1c:fa:a7:45:eb",
|
|
"statistics": {
|
|
"in-octets": "726",
|
|
"out-octets": "512"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"infix-interfaces:bridge-port": {
|
|
"bridge": "br1",
|
|
"flood": {
|
|
"broadcast": true,
|
|
"unicast": true,
|
|
"multicast": true
|
|
},
|
|
"multicast": {
|
|
"fast-leave": false,
|
|
"router": "auto"
|
|
},
|
|
"stp": {
|
|
"cist": {
|
|
"state": "forwarding"
|
|
}
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:bridge",
|
|
"name": "br1",
|
|
"if-index": 19,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "600"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"infix-interfaces:bridge": {
|
|
"vlans": {
|
|
"proto": "ieee802-dot1q-types:c-vlan",
|
|
"vlan": [
|
|
{
|
|
"vid": 6,
|
|
"untagged": [
|
|
"veth1b"
|
|
],
|
|
"tagged": [],
|
|
"multicast": {
|
|
"snooping": true,
|
|
"querier": "off"
|
|
},
|
|
"multicast-filters": {
|
|
"multicast-filter": []
|
|
}
|
|
}
|
|
]
|
|
}
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:vlan",
|
|
"name": "e3.8",
|
|
"if-index": 20,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:03",
|
|
"statistics": {
|
|
"in-octets": "10654",
|
|
"out-octets": "14688"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "10.1.1.1",
|
|
"prefix-length": 32,
|
|
"origin": "static"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:vlan": {
|
|
"tag-type": "ieee802-dot1q-types:c-vlan",
|
|
"id": 8,
|
|
"lower-layer-if": "e3"
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:vlan",
|
|
"name": "e4.8",
|
|
"if-index": 21,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"phys-address": "00:a0:85:00:03:04",
|
|
"statistics": {
|
|
"in-octets": "8835",
|
|
"out-octets": "15085"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "10.1.1.1",
|
|
"prefix-length": 32,
|
|
"origin": "static"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:vlan": {
|
|
"tag-type": "ieee802-dot1q-types:c-vlan",
|
|
"id": 8,
|
|
"lower-layer-if": "e4"
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth2a",
|
|
"if-index": 12,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"description": "eth0",
|
|
"phys-address": "06:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "38078",
|
|
"out-octets": "266"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"address": [
|
|
{
|
|
"ip": "fe80::4a0:85ff:fe00:300",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:container-network": {
|
|
"containers": [
|
|
"container-B"
|
|
]
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth3a",
|
|
"if-index": 17,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"description": "eth1",
|
|
"phys-address": "06:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "768",
|
|
"out-octets": "726"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"address": [
|
|
{
|
|
"ip": "fe80::4a0:85ff:fe00:300",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:container-network": {
|
|
"containers": [
|
|
"container-B"
|
|
]
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth0a",
|
|
"if-index": 10,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"description": "br0",
|
|
"phys-address": "06:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "35483",
|
|
"out-octets": "2013"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500,
|
|
"address": [
|
|
{
|
|
"ip": "169.254.1.2",
|
|
"prefix-length": 16,
|
|
"origin": "other"
|
|
}
|
|
]
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"address": [
|
|
{
|
|
"ip": "fe80::4a0:85ff:fe00:300",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:container-network": {
|
|
"containers": [
|
|
"container-A"
|
|
]
|
|
}
|
|
},
|
|
{
|
|
"type": "infix-if-type:veth",
|
|
"name": "veth1a",
|
|
"if-index": 15,
|
|
"admin-status": "up",
|
|
"oper-status": "up",
|
|
"description": "br1",
|
|
"phys-address": "06:a0:85:00:03:00",
|
|
"statistics": {
|
|
"in-octets": "812",
|
|
"out-octets": "726"
|
|
},
|
|
"ietf-ip:ipv4": {
|
|
"mtu": 1500
|
|
},
|
|
"ietf-ip:ipv6": {
|
|
"address": [
|
|
{
|
|
"ip": "fe80::4a0:85ff:fe00:300",
|
|
"prefix-length": 64,
|
|
"origin": "link-layer"
|
|
}
|
|
]
|
|
},
|
|
"infix-interfaces:container-network": {
|
|
"containers": [
|
|
"container-A"
|
|
]
|
|
}
|
|
}
|
|
]
|
|
}
|
|
}
|