mirror of
https://github.com/kernelkit/infix.git
synced 2026-07-30 12:33:02 +02:00
Joachim Wiberg
fa6023c9c4
Replace BusyBox udhcpc6 with OpenWrt's odhcp6c for improved DHCPv6 functionality and better integration with Router Advertisements (RA). The primary motivation is support for a common ISP deployment scenario where IPv6 addresses are assigned via SLAAC (from Router Advertisements) and DHCPv6 is used in stateless/information-only mode to provide DNS servers and other configuration options. This hybrid RA+DHCPv6 setup is standard practice for many ISPs but was not supported by udhcpc6, which treats RA and DHCPv6 as separate, non-integrated mechanisms. Additional benefits of odhcp6c: - Better IPv6 Prefix Delegation (IA-PD) support with proper handling of delegated prefix lifetimes and renewal - Native integration of RA-provided configuration (DNS servers, routes, addresses) with DHCPv6-provided options - Support for stateless DHCPv6 via information-only mode To verify stateless DHCPv6 integration with SLAAC addresses - the ISP scenario that motivated this migration, a new test case has been added. Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
24 lines
543 B
Plaintext
24 lines
543 B
Plaintext
=== DHCPv6 Basic
|
|
|
|
ifdef::topdoc[:imagesdir: {topdoc}../../test/case/dhcp/client6_basic]
|
|
|
|
==== Description
|
|
|
|
Enable a DHCPv6 client and verify it requests an IPv6 lease from a
|
|
DHCPv6 server that is then set on the interface.
|
|
|
|
==== Topology
|
|
|
|
image::topology.svg[DHCPv6 Basic topology, align=center, scaledwidth=75%]
|
|
|
|
==== Sequence
|
|
|
|
. Set up topology and attach to target DUT
|
|
. Configure DHCPv6 client
|
|
. Verify DHCPv6 client is running
|
|
. Verify client lease for {CLIENT}
|
|
. Verify client default route ::/0
|
|
. Verify client domain name resolution
|
|
|
|
|