=== VLAN Interface Termination

ifdef::topdoc[:imagesdir: {topdoc}../../test/case/interfaces/vlan_iface_termination]

==== Description

Verify that VLANs stacked on top of an interfaces that are also
attached to a VLAN filtering bridge are always locally terminated.

....
.---------------------------.
|           target          |
|                           |
|  data1.10  br0  data2.10  |
|      \    /   \    /      |
'------data1-----data2------'
         |         |
         |         |
.------data1-----data2------.
|      /      :     \       |
|  data1.10   :   data2.10  |
|             :             |
|           host            |
|             :             |
'---------------------------'
....

In this setup, even though VLAN 10 is allowed to ingress and egress on
both `data1` and `data2`, _bridging_ of packets from one to the other
must _not_ be allowed.

==== Topology

image::topology.svg[VLAN Interface Termination topology, align=center, scaledwidth=75%]

==== Sequence

. Set up topology and attach to target
. Configure bridge and VLAN interfaces on target
. Configure IP addresses and VLAN interfaces on host
. Verify that host:data1 reaches host:data2 with untagged packets
. Verify that traffic on VLAN 10 from host:data1 does not reach host:data2
. Verify that host:data1 can reach target on VLAN 10
. Verify that host:data2 can reach target on VLAN 10