Infix is an embedded Linux Network Operating System (NOS) based on [Buildroot][1], [Finit][2], and [ifupdown2][3]. > Login with user 'root', no password by default on plain builds. See > the online `help` command for an introduction to the system. Hardware -------- ### aarch64 By default, Infix builds with support for the following boards (you may enable additional boards in the config, of course): - Marvell CN9130 CRB - Marvell EspressoBIN - Microchip SparX-5i PCB135 (eMMC) See the aarch64 specific [documentation](board/aarch64/README.md) for more information. ### amd64 Primarily intended to be run under [QEMU][] for development & test as well as evaluation, demo and [training][] purposes, e.g. using [GNS3][]. QEMU ---- A virtualized instance can easily be launched from a Linux system, with Qemu installed, by issuing `make run`. Some settings, e.g. networking, can be configured via `make menuconfig` under `External options -> QEMU virtualization`. GNS3 ---- Download the [latest build][0] of amd64, unpack in a dedicated directory and use ["Import Appliance"][9] to install the `.gns3a` file into GNS3. Infix will show up in the "Router" category, it has 10 interfaces available by default for use as switch ports or routing. [0]: https://github.com/kernelkit/infix/releases/tag/latest [1]: https://buildroot.org/ [2]: https://github.com/troglobit/finit [3]: https://github.com/kernelkit/ifupdown2 [9]: https://docs.gns3.com/docs/using-gns3/beginners/import-gns3-appliance/ [QEMU]: https://www.qemu.org/ [GNS3]: https://gns3.com/ [training]: https://addiva-elektronik.github.io/