# System Configuration System settings in Infix are provided by the [ietf-system][1] YANG model, augmented with Linux specific extensions in [infix-system][2], like Message of the Day (login message) and user login shell. More on this later on in this document. For the sake of brevity, the hostname in the following examples has been shortened to `example`. The default hostname is composed from a product specific string followed by the last three octets of the system base MAC address, e.g., `switch-12-34-56`. An example of how to change the hostname is included below. > [!NOTE] > When issuing `leave` to activate your changes, remember to also save > your settings, `copy running-config startup-config`. See the [CLI > Introduction](cli/introduction.md) for a background. ## Changing Password User management, including passwords, SSH keys, remote authentication is available in the system authentication configuration context. 
admin@example:/config/> edit system authentication user admin
admin@example:/config/system/…/user/admin/> change password
New password:
Retype password:
admin@example:/config/system/…/user/admin/> leave
The `change password` command starts an interactive dialogue that asks for the new password, with a confirmation, and then salts and encrypts the password with sha512crypt. It is also possible to use the `set password ...` command. This allows setting an already hashed password. To manually hash a password, use the `do password encrypt` command. This launches the admin-exec command to hash, and optionally salt, your password. This encrypted string can then be used with `set password ...`. > [!TIP] > If you are having trouble thinking of a password, there is a nifty > `password generate` command in admin-exec context which generates > random passwords using the UNIX command `pwgen`. Use the `do` prefix > when inside any configuration context to access admin-exec commands. ### SSH Authorized Key Logging in remotely with SSH is possible by adding a *public key* to a user. Here we add the authorized key to the admin user, multiple keys are supported. With SSH keys in place it is possible to disable password login, just remember to verify SSH login and network connectivity before doing so. 
admin@example:/config/> edit system authentication user admin
admin@example:/config/system/…/user/admin/> edit authorized-key admin@example
admin@example:/config/system/…/example@host/> set algorithm ssh-rsa
admin@example:/config/system/…/example@host/> set key-data 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
admin@example:/config/system/…/example@host/> show
algorithm ssh-rsa;
key-data 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;
admin@example:/config/system/…/example@host/> leave
> [!NOTE] > The `ssh-keygen` program already base64 encodes the public key data, > so there is no need to use the `text-editor` command, `set` does the > job. ## Multiple Users The factory configuration provides three hierarchical user group levels by default: **guest ⊂ operator ⊂ admin**. These levels work out-of-the-box with sensible permissions - operators can configure the system immediately, while sensitive items (passwords, cryptographic keys) remain protected. The default levels provide different access to system resources and configuration: - **Admin**: Full system access - can manage users, upgrade software, restart the system, and modify all configuration including network settings, routing, and firewall rules. - **Operator**: Configuration access - can modify most system settings including network interfaces, routing, firewall, hostname, and more. *Cannot access* password hashes, cryptographic keys, or perform sensitive operations (factory reset, software upgrade). - **Guest**: Read-only access - can view operational state and configuration but cannot modify anything or execute operations. System access control is handled by the [ietf-netconf-acm][3] YANG model, usually referred to as [NACM](nacm.md), which provides granular access to configuration, data, and RPC commands. The hierarchical levels in the system are determined by: 1. **NACM permissions** - what the user can access 2. **Shell setting** - which command-line interface the user can use By default the system ships with a single user, `admin`, in the `admin` group. There are no restrictions on the number of users with admin privileges, nor is the `admin` user reserved or protected -- it can be removed from the configuration. However, it is strongly recommended to keep at least one user with administrator privileges, otherwise the only way to regain full access is to perform a *factory reset*. For an overview of users and groups on the system, there is an admin-exec command: 
admin@example:/> show nacm
enabled              : yes
default read access  : permit
default write access : permit
default exec access  : permit
denied operations    : 0
denied data writes   : 0
denied notifications : 0

          ┌──────────┬─────────┬─────────┬─────────┐
          │ GROUP    │  READ   │  WRITE  │  EXEC   │
          ├──────────┼─────────┼─────────┼─────────┤
          │ admin    │    ✓    │    ✓    │    ✓    │
          │ operator │    ⚠    │    ⚠    │    ⚠    │
          │ guest    │    ⚠    │    ✗    │    ✗    │
          └──────────┴─────────┴─────────┴─────────┘
              ✓ Full    ⚠ Restricted    ✗ Denied

USER                   SHELL   LOGIN                            
admin                  bash    password+key
jacky                  clish   password
monitor                false   key

GROUP                  USERS                                    
admin                  admin
operator               jacky
guest                  monitor
The permissions matrix shows effective access for each NACM group: - **✓ Full** (green) - unrestricted access - **⚠ Restricted** (yellow) - access with exceptions, use `show nacm group` for details - **✗ Denied** (red) - no access For detailed information about a specific group's rules: 
admin@example:/> show nacm group operator
members          : jacky
read permission  : restricted
write permission : restricted
exec permission  : restricted
applicable rules : 4
──────────────────────────────────────────────────────────────────────
permit-system-rpcs
  action     : permit
  operations : exec
  target     : ietf-system (rpc: *)
  comment    : Operators can reboot, shutdown, and set system time.

──────────────────────────────────────────────────────────────────────
deny-password-access (via '*')
  action     : deny
  operations : *
  target     : /ietf-system:system/authentication/user/password
  comment    : No user except admins can access password hashes.

──────────────────────────────────────────────────────────────────────
deny-keystore-access (via '*')
  action     : deny
  operations : *
  target     : ietf-keystore
  comment    : No user except admins can access cryptographic keys.

──────────────────────────────────────────────────────────────────────
deny-truststore-access (via '*')
  action     : deny
  operations : *
  target     : ietf-truststore
  comment    : No user except admins can access trust store.
For user details: 
admin@example:/> show nacm user jacky
shell            : clish
login            : password
nacm group       : operator
read permission  : restricted
write permission : restricted
exec permission  : restricted

For detailed rules, use: show nacm group <name>
### Adding a User Creating a new user starts with defining the user account in the system: 
admin@example:/config/> edit system authentication user jacky
admin@example:/config/system/…/user/jacky/> change password
New password:
Retype password:
admin@example:/config/system/…/user/jacky/> leave
> [!TIP] > It is also possible to use set password ... if you have the > fully crypted and salted string ready. This can be created offline > with the [`mkpasswd(1)`][5] tool, or the built-in CLI version do > password encrypt [OPTS]. The `do` prefix is handy for reaching > all top-level commands when in configure context. An authorized SSH key can be added the same way as described in the previous sections. By default, shell access is disabled (`shell false`). To allow CLI/SSH access, set the shell: 
admin@example:/config/> edit system authentication user jacky
admin@example:/config/system/…/user/jacky/> set shell clish
admin@example:/config/system/…/user/jacky/> leave
Available shells: - `bash` - Full Bourne-again shell (recommended for admins only) - `sh` - POSIX shell (recommended for admins only) - `clish` - Limited CLI-only shell (recommended for operators and guests) - `false` - No shell access (default) > [!WARNING] Security Notice > For security reasons, it is strongly recommended to limit non-admin users > to the `clish` shell, which provides CLI access without exposing the > underlying UNIX system. Reserve `bash` and `sh` for administrators who > need full system access for debugging and maintenance. > > Note that shell and CLI access is not always necessary - the system > supports NETCONF and RESTCONF for remote management and automation. > Setting `shell false` for users who only need programmatic access > minimizes the attack surface and improves overall system security. ### Adding a User to a Group To assign a user to a specific privilege level, add them to the corresponding NACM group: **Operator user:** 
admin@example:/config/> edit nacm group operator
admin@example:/config/nacm/group/operator/> set user-name jacky
admin@example:/config/nacm/group/operator/> leave
**Adding another admin:** 
admin@example:/config/> edit nacm group admin
admin@example:/config/nacm/group/admin/> set user-name alice
admin@example:/config/nacm/group/admin/> leave
**Guest user:** 
admin@example:/config/> edit nacm group guest
admin@example:/config/nacm/group/guest/> set user-name monitor
admin@example:/config/nacm/group/guest/> leave
> [!TIP] > For technical details about NACM rule evaluation, module-name vs path > matching, and creating custom access control policies, see the > [NACM Technical Guide](nacm.md). ### Access Control Matrix The following table shows what each user level can do based on the NACM rules and shell access configured for each user: - **Admin**: `bash` — full system access - **Operator**: `clish` — CLI-only access without UNIX system exposure - **Guest**: `false` — no shell access | Feature | Admin | Operator | Guest | |------------------------|-------|----------|-----------| | Network interfaces | ✓ | ✓ | Read only | | Routing (FRR) | ✓ | ✓ | Read only | | Firewall rules | ✓ | ✓ | Read only | | VLANs/bridges | ✓ | ✓ | Read only | | Containers | ✓ | ✓ | Read only | | Hostname/system config | ✓ | ✓ | Read only | | CLI/SSH access | ✓ | ✓ | ✗ | | System restart | ✓ | ✓ | ✗ | | Set date/time | ✓ | ✓ | ✗ | | System reboot | ✓ | ✓ | ✗ | | System shutdown | ✓ | ✓ | ✗ | | User management | ✓ | ✗ | Read only | | Keystore (certs/keys) | ✓ | ✗ | ✗ | | Truststore | ✓ | ✗ | ✗ | | Read passwords/secrets | ✓ | ✗ | ✗ | | NACM rules | ✓ | ✗ | ✗ | | Factory reset | ✓ | ✗ | ✗ | | Software upgrade | ✓ | ✗ | ✗ | ### Security Aspects The three default user levels are implemented through a combination of NACM rules and UNIX group membership. Access control is permission-based, not name-based - the system detects user levels by examining their NACM permissions and shell settings. **Admin users** have unrestricted NACM access with the following rule: ```json "module-name": "*", "access-operations": "*", "action": "permit" ``` Admin users are automatically added to the UNIX `wheel` and `frrvty` groups, granting them `sudo` privileges and access to FRR routing protocols. This makes it possible to use all the underlying UNIX tooling, which can be very useful for debugging, but please use with care -- the system is designed to be managed through the CLI and NETCONF, not directly via shell commands. **Operator users** use the permit-by-default NACM model (`write-default: "permit"`), which means they can configure most system settings without explicit permit rules. This design is "future proof" - when new features are added, operators can immediately use them. The following are explicitly denied to operators through global NACM rules: - Password hashes (`/ietf-system:system/authentication/user/password`) - Cryptographic keys (`ietf-keystore` module) - Trust store certificates (`ietf-truststore` module) Additionally, sensitive operations like factory reset, software upgrades, and system shutdown are protected by YANG-level `nacm:default-deny-all` annotations and remain restricted to administrators. Operators are automatically added to the UNIX `operator` and `frrvty` groups, granting them `sudo` privileges for network operations and FRR access. **Guest users** have read-only NACM access through an explicit deny rule that blocks all write and exec operations (`create update delete exec`), while `read-default: "permit"` allows viewing configuration and state. Guests receive no special UNIX group memberships. The shell setting determines whether guests can access the CLI (`clish`) or are restricted from shell access entirely (`false`). All users, regardless of level, are denied access to password hashes and cryptographic key material through global NACM rules. ## Changing Hostname Notice how the hostname in the prompt does not change until the change is committed by issuing the `leave` command. 
admin@example:/config/> edit system
admin@example:/config/system/> set hostname myrouter
admin@example:/config/system/> leave
admin@myrouter:/>
The hostname is advertised over mDNS-SD in the `.local` domain. If another device already has claimed the `myrouter.local` CNAME, in our case, mDNS will advertise a "uniqified" variant, usually suffixing with an index, e.g., `myrouter-1.local`. Use an mDNS browser to scan for available devices on your LAN. In some cases you may want to set the device's *domain name* as well. This is handled the same way: 
admin@example:/config/> edit system
admin@example:/config/system/> set hostname foo.example.com
admin@example:/config/system/> leave
admin@foo:/>
Both host and domain name are stored in the system files `/etc/hosts` and `/etc/hostname`. The latter is exclusively for the host name. The domain *may* be used by the system DHCP server when handing out leases to clients, it is up to the clients to request the domain name *option*. > [!NOTE] > Critical services like syslog, mDNS, LLDP, and similar that advertise > the hostname, are restarted when the hostname is changed. ## Changing Login Banner The `motd-banner` setting is an Infix augment and an example of a `binary` type setting that can be changed interactively with the built-in [`text-editor` command](cli/text-editor.md). > [!TIP] > See the next section for how to change the editor used to something > you may be more familiar with. 
admin@example:/config/> edit system
admin@example:/config/system/> text-editor motd-banner
admin@example:/config/system/> leave
admin@example:/>
Log out and log back in again to inspect the changes. ## Changing the Editor The system has three different built-in editors that can be used as the `text-editor` command: - `emacs` (Micro Emacs) - `nano` (GNU Nano) - `vi` (Visual Editor) To change the editor to GNU Nano: 
admin@example:/> configure
admin@example:/config/> edit system
admin@example:/config/system/> set text-editor nano
admin@example:/config/system/> leave
admin@example:/>
> [!IMPORTANT] > Configuration changes only take effect after issuing the `leave` > command. I.e., you must change the editor first, and then re-enter > configure context to use your editor of choice. ## DNS Resolver Configuration The system supports both static and dynamic (DHCP) DNS setup. The locally configured (static) server is preferred over any acquired from a DHCP client. 
admin@example:/> configure
admin@example:/config/> edit system dns-resolver
admin@example:/config/system/dns-resolver/> set server google udp-and-tcp address 8.8.8.8
admin@example:/config/system/dns-resolver/> show
server google {
  udp-and-tcp {
    address 8.8.8.8;
  }
}
admin@example:/config/system/dns-resolver/> leave
It is also possible to configure resolver options like timeout and retry attempts. See the YANG model for details, or use the built-in help system in the CLI. > [!NOTE] > When acting as a DHCP server and DNS proxy for other devices, any > local DNS server configured here is automatically used as upstream DNS > server. ## NTP Client Configuration Below is an example configuration for enabling NTP with a specific server and the `iburst` option for faster initial synchronization. 
admin@example:/> configure
admin@example:/config/> edit system ntp
admin@example:/config/system/ntp/> set enabled
admin@example:/config/system/ntp/> set server ntp-pool
admin@example:/config/system/ntp/> set server ntp-pool udp address pool.ntp.org
admin@example:/config/system/ntp/> set server ntp-pool iburst
admin@example:/config/system/ntp/> set server ntp-pool prefer
admin@example:/config/system/ntp/> leave
This configuration enables the NTP client and sets the NTP server to `pool.ntp.org` with the `iburst` and `prefer` options. The `iburst` option ensures faster initial synchronization, and the `prefer` option designates this server as preferred. * `prefer false`: The NTP client will choose the best available source based on several factors, such as network delay, stratum, and other metrics (default config). * `prefer true`: The NTP client will try to use the preferred server as the primary source unless it becomes unreachable or unusable. ### Show NTP Sources The status for NTP sources is availble in YANG and accessable with CLI/NETCONF/RESTCONF. To view the sources being used by the NTP client, run: 
admin@example:/> show ntp
Mode                : Client
Stratum             : 3
Ref time (UTC)      : Sat Jan 24 23:41:42 2026

ADDRESS         MODE    STATE     STRATUM  POLL
147.78.228.41   server  outlier         2   64s
192.168.0.1     server  unusable        0  128s
176.126.86.247  server  selected        2   64s
### Show NTP Status To check the status of NTP synchronization (only availble in CLI), use the following command: 
admin@example:/> show ntp tracking
Reference ID        : 176.126.86.247
Stratum             : 3
Ref time (UTC)      : Sat Jan 24 23:41:42 2026
System time         : 0.000000 seconds slow of NTP time
Last offset         : -454779.375000000 seconds
RMS offset          : 454779.375000000 seconds
Frequency           : 0.000 ppm slow
Residual freq       : -26.383 ppm
Skew                : 1000000.000 ppm
Root delay          : 0.007395 seconds
Root dispersion     : 39.181149 seconds
Update interval     : 0.0 seconds
Leap status         : Normal
This output provides detailed information about the NTP status, including reference ID, stratum, time offsets, frequency, and root delay. > [!TIP] > The system uses `chronyd` Network Time Protocol (NTP) daemon. The > output shown here is best explained in the [Chrony documentation][4]. [1]: https://www.rfc-editor.org/rfc/rfc7317 [2]: https://github.com/kernelkit/infix/blob/main/src/confd/yang/infix-system%402024-02-29.yang [3]: https://www.rfc-editor.org/rfc/rfc8341 [4]: https://chrony-project.org/doc/4.6.1/chronyc.html [5]: https://linux.die.net/man/1/mkpasswd