This adds support for the two /etc/os-release variables:
- IMAGE_ID
- IMAGE_VERSION
The former is configurable, with fallback to name-arch, and the latter
is only set for relase builds. During releae builds the release will
be appended to the image name.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Currently does not need any conditions, but may later need to check for
loaded modules and other capabilities.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Create per-arch unique distribution file names
- Source .gns3a information from /etc/os-release
Instead of attempting to create unique file names by hard-coding an
'infix-' prefix and extracting the "board" or "arch" part from the
defconfig, let's use the branding information from /etc/os-release
along with $BR2_ARCH.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This makes it possible for projects using Infix as a br2-external to
override lots of OS-specific strings and contact information that
previously was hard coded.
The generated /etc/os-release now takes most of its data from .config
Worth noting is the changes in VERSION and BUILD_ID fields. The former
will be INFIX_RELEASE, during release builds, and the latter is always
the output from `git descibe ...`, or rather GIT_VERSION. This variable
can be overloaded as well.
See the help text and the new doc/branding.md document for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The default arch and disk image filename needs to be generated
to be unique per, at least, each architecture build.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Due to problems with using u-boot as loader¹ we decided to start the
system by calling the kernel image directly. The downside to that is
that, even though RAUC upgrades would work, the kernel would remain
the same.
Improvements to this are of course welcome.
________
¹) Must extract the built-in .dtb and merge with the Qemu .dtb at runtime
to be able to boot primary (or secondry) image.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Calling `load_cfg BR2_EXTERNAL_INFIX_PATH` from post-image.sh caused
warnings due to multiple hits in the .config file:
post-image.sh: 12: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
post-image.sh: 13: /tmp/tmp.5a3xhQQVc8: BR2_EXTERNAL_INFIX_PATH: not found
Let's grep for a "key.*=" instead of "key" to drop those warnings, while
still acting as a catch-all for partial matches.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit drops sulogin from BusyBox, as well as the Finit replacement,
in the NETCONF builds. The classic builds retain the Finit sulogin.
Furthermore, the Finit rescue mode is disabled (which uses sulogin), so
in case of trouble at boot, e.g. missing fstab or failure to fsck, the
system will no longer go to sulogin but instead log error to console and
reboot.
NOTE: the bootloader still needs to be locked down, otherwise a user
could just as easily change kernel cmdline to 'shell=/bin/sh'
Misc. reshuffle and defaults updated are due to make foo-update-defconfig.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Instead, use the version from package/skeleton-init-finit, including the
ssh-hostkeys (previously ssh-genhostkeys) from the same package, because
it include extensive error handling and logging on failure.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Set the IP origin "random" for avahi IPv4LL addresses. The reason we
use random and not link-layer for link-local IPv4 addresses is the
fact that they are not based on link-layer info, such as IPv6 eui64
generated LL addresses.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine copy of the current version of avahi-autoipd.action.
This script will be modified by us in later commits.
Signed-off-by: Richard Alpe <richard@bit42.se>
Flush addresses during shutdown and renewal with new address.
This is kind of a hack and needs further testing.
Signed-off-by: Richard Alpe <richard@bit42.se>
This fixes one bug in Infix, namely that dhcp removes all other
statically configured addresses. However it introduces a new one
where dhcp renewals with new ip addresses are added as "duplicates",
we fix this in a later commit in this patchset.
Signed-off-by: Richard Alpe <richard@bit42.se>
Add a pristine version of default.script to our local board override.
The reason for this commit is to track changes we do to it.
Signed-off-by: Richard Alpe <richard@bit42.se>
This file is read by iproute2 and creates valid names for ip proto.
Such as "static" in:
ip addr add dev e0 192.168.1.1/24 proto static
Signed-off-by: Richard Alpe <richard@bit42.se>
The port marker is intended to be used as a hint to the
auto-factory-config generator, so that it can create a bridge for all
switch ports by default. Therefore, revert to only include ports that
devlink reports as "flavour physical".
If we want to test this functionality in QEMU, we can use Rocker, the
virtual switch, instead.
On some system, certain interfaces are not usable by an end-user. The
canonical example of this is the ethernet MAC connected to a switch,
i.e. the DSA port.
Avoid having these be picked up in the generated factory-config, which
would be confusing to a user, by classifying them as "internal" ports
to be ignored by confd and friends.
The kernel's mounting of the rootfs may race against the underlying
device being probed - especially for media like MMC cards and USB
sticks.
Therefore, tell the kernel to wait for the root device to show up.
In the future we want to build disk images from builds where we
haven't locally built Infix, we've just downloaded an existing
release. In those cases we also have to create rauc.status, even
though we're not creating a bundle.
Make the traditional FITs smaller by:
- Filtering out the kernel image from the rootfs, since the FIT way is
to ship it separately.
- Gzipping the kernel in the FIT, since aarch64 uses the uncompressed
"Image" format, and squashfs won't take care of it for us.
- Always respect the requested model to emulate. Before this change, a
device configured to run in TAP mode would ignore a user's requested
model and always emulate a e1000.
This worked on x86_64 where that driver is part of the kernel, but
that is not true for aarch64.
- Always supply a mactab. It was very confusing that the interface
names would change, in Infix, depending on the selected networking
mode.
- Remove old decoy variables that were assigned but never used
anywhere.
- Separately setup the host and target side of a nic (i.e. use a
-netdev/-device pair instead of the -nic shortcut). This lets us
share the host side setup across all modes.
This reverts an earlier change where nano was made the default editor in
a misguided attemt by yours truly to accomodate beginner users.
With the recent improvements of the CLI and the fact that the NETCONF
support has matured greatly, the need for a user-friendly editor have
diminished drastically. Editing system files is now limited to devs
and the core team prefers Mg over nano and vi.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This is not just for online viewing, these markdown documents are also
made available in the CLI itself from admin-exec as:
help [introduction | keybindings | tutorial]
With this commit we also add lowdown and the real less application to
be the Infix help system.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This commit enables a basic sanity check of usernames in BusyBox that by
default is disabled (!). The rules enabled by this are:
- the user or group name should consist only of letters, digits,
underscores, periods, and dashes¹, and not start with a dash (as
defined by IEEE Std 1003.1-2001), or periods²
- for compatibility with Samba machine accounts, $ is supported at the
end of names
- max length of user or group name is 256 chars
Changes in this commit also includes a sync with latest BusyBox 1.36,
which adds: tree, tsort, SHA hw acceleration, and a separate script
for udhcpc6.
_____
¹) The documentation actually mentions "and at-signs" as well, but that
has been explicitly removed from the source code.
²) The documentation does not mention that leading periods are not
allowed, though this is also explicitly mentioned in the source code.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add /bin/clish (symlink) to /etc/shells, as well as the traditional
/bin/{true,false} for completeness
- Validate shell string, with fallback to /bin/bash and /bin/sh
- Step infix-system revision, keeping old model in tree
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This allows an application to set a larger socket receive buffer size.
The default size is left unchanged (212992). 1MB is arbitrary chosen.
The main reason for this is to allow netlink kernel sockets to
hold more interface data while user-space is processing it. Typically
useful during main configuration changes where lots of kernel side
changes occur in short period of time, such as VLAN creation.
Signed-off-by: Richard Alpe <richard@bit42.se>
This let's us report the installed software versions, before any
updates have been made. Since the info should _not_ be erased in a
factory reset (since the installed software versions will not change),
move the status file to aux, which is the proper place for this class
of information.
- When running with full disk emulation (via GRUB on x86, or U-Boot on
aarch64), there's no way for us to influence the commandline passed
to the kernel, so the console is fixed to ttyS0/AMA0. Therefore,
reintroduce an option to choose the console.
- Use a fixed `nr`s for virtconsoles, so that the gdbserver always
listens on `hvc1`. Ideally, we should use udevs `/dev/virtio-ports/*`
symlinks, but for some reason these point to `/dev/vportXpY` and not
to `/dev/hvcY`. TODO: Figure out what the difference is.
- While we're here, remove the duplicated RTC setup which was
introduced with the virtio-console work a while back.
/dev/ram is accepted by the kernel during boot, but there's no actual
file with this name in /dev, so RAUC will get confused about which
slot is actually one we booted from.
