{topdoc} is needed for asciidoctor to find the image during test
report generation.
This is the same functional change as 02d8288863 but with the
generation script actually updated. This was forgotten in the last
commit.
Signed-off-by: Richard Alpe <richard@bit42.se>
Do not allow the topology matcher to setup a LAG where one link is
running at 10G while the other one runs at 1G, since the bond will
never use the 1G port as long as there the 10G link is up.
Verify connectivity from host to the second DUT via the first, over a
link aggregate. Both aggregate member links are connected to a TPMR
link breaker to hide link down from the DUTs.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Verify connectivity from host to the second DUT via the first, over a
link aggregate. The lag starts in static mode and then changes to an
LACP aggregate. This verifies not just basic aggregate functionality,
but also changing mode, which is quite tricky to get right.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Implemented logic to check if the system supports required services.
Logical edges with 'requires' fields are mapped only if physical edges
provide corresponding services. If not, the test is skipped.
This ensures that tests only run when the required services are available
in the test system configuration.
Fixes#654
This should be a non functional change. The idea is to use the topdoc
dir from 9pm when generating the test report.
Signed-off-by: Richard Alpe <richard@bit42.se>
Ensure that all flavors of GRE tunnels can be configured. In addition
to the increased test coverage, it will also be useful as a basis for
collecting representative system state for CLI testing.
Ensure that VLANs can be configured on VLAN filtering bridges. In
addition to the increased test coverage, it will also be useful as a
basis for collecting representative system state for CLI testing.
This is just a first step to add VXLAN tunnels, much more remains.
Implemented right now is as GRE, local, remote and a VNI.
Also refactor gre_basic and gre_bridged to generic tunnel tests,
the same test now tests VXLAN as well.
Basic support GRE and GRETAP tunnels both for IPv4 and IPv6.
Limited support right now, only possible to configure local
ip address and remote ip address.
This will fail on a system running a vanilla kernel, where the dut's
ports are backed by mv88e6xxx, because:
1. The ports are attached to the same bridge, and are thus in the same
PVT group.
2. Creation of the VLAN uppers causes the DSA layer to add both ports
to the same VTU entry.
As a result, hardware behaves as if both ports had been configured as
tagged members of VLAN 10, instead of just terminating incoming
traffic locally.
Add this test to catch hardware which behaves in this way.
- Verify that broadcast packets are also properly moved accross the
bridge, i.e. the broadcast packets sent from vlan interface VLAN10
do not reach VLAN20
Fixes#773
Initially done as a workaround for the MACVLAN create/remove race. But
even though the old version of this test now works, this refactor
provides better test step descriptions, making it easier to follow for
anyone looking to manually verify the functionality.
SVG is a plain text file, better to see why it changed
than binary PNG. Also fix#744 by adding infix/OEM hash
to test specification
Signed-off-by: Mattias Walström <lazzer@gmail.com>
This commit replaces the ietf-interfaces deviation for phys-address,
used to set custom MAC address on interfaces, with a more flexible
approach which can calculate the new MAC address based on the device's
chassi MAC, with or without an added offset.
The regression test has been updated to test all variants.
Resolves: #680
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The ASCII art over the topology must be surrounded by .... and
is codeblock in ASCIIdoc. Since this is only used for ASCII arts
to help describe tests, border and background are white.
Ahmed Karic