Apparently the BCM2835 watchdog driver does not hook into /dev/watchdog
but creates its own /dev/watchdog0, and is very picky about interval and
timeout as well it seems.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- switch to 6.12 LTS, same as other Infix boards
- trim down kernel config a bit
- sync defconfig with r2s to switch to Finit
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Non-privileged users in the sys-cli group can now access sysrepo data.
The data is now solely protected by the NCAM rules and not Unix file
permissions. Any stray user that's not part of the (default) sys-cli
group still can't access syrepo, like users added from the shell.
Fixes#932
Signed-off-by: Richard Alpe <richard@bit42.se>
The reason for this is:
1) We want to use the same fetch tool for all operational data, to
avoid having duplicated xpaths scattered across the repo.
2) We want to call this directly from the CLI, which means it need to
be escape safe. A unprivileged user shall be able to use it but not
escape into a shell or do other malicious stuff.
Signed-off-by: Richard Alpe <richard@bit42.se>
- Bump kernel to 6.12.21, same as other tier one boards
- Fix#1006 byt enabling netlink for ethtool (now works!)
- Sync defconfigs:
- LIBXCRYPT now in an rdep of another package
- Disable FORCE check hashes for now
- Drop patches for 6.10 tree (r2s kernel)
- Port RTL8153b patch for R2S LAN LED support
Fixes#1006
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Introduce a new approach to dtb-building:
Old way: `rsync` an overlay containing our dt source to the kernel,
and then build via buildroot's `_INTREE_DTS_NAME`. This does not work
in recent kernels (at least since 6.12), which requires all dtb's to
be explicitly listed in a `Makefile`.
New way: Create a separate package for every board, and build the
device trees via the kernel's standard interface for building external
modules. This has two main advantages:
1. We can easily interpose a patched version of an upstream device
tree. E.g., we can easily set the factory password.
2. It is much easier to get an overview of which boards are enabled,
rather than scrolling back and forth in the `_INTREE_DTS_NAME` list.
Enable all fully supported boards in the defconfigs.
Since `conmon` only logs the output from the monitored container's
`stdout`/`stderr`, we might as well get rid of `k8s-logger`, and let
the output pass through to finit, which will then pipe the messages to
syslog.
Fix#836
Fixes issue with netopeer2-server failing to load its host certificate.
Follow-up to 8b75022 for the NanoPi R2S.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Declare that confd-test-mode depends on confd, otherwise with 'select',
a call to `make update-defconfig` will remove BR2_PACKAGE_CONFD=y, which
we feel is very confusing -- in particular when comparing any defconfig
that does not have test-mode package.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
NETOPEER2 requries the OpenSSL backend of libssh. By default, except on
minimal builds, is to use GCrypt backend. Gcrypt is selected because of
Podman, which is not in the minimal builds.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Sync (make update-defconfig)
- test-mode selects confd
- gencert seclets openssl which in turn selects LIBSSH*_OPENSSL
- rest is relocaations according to Config.in
- Add LIBMNL to x86_64 targets, otherwise iproute2 does not install devlink
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The name 'minimal' was chosen after a long AFK discussion where names
like 'generic', 'reference', 'testing', 'mod', and others were tossed
around and quickly discarded.
The minimal name can also be extended upon in customer trees, e.g., a
aarch64_minimal_styx_defconfig would indicate something built on the
upstream minimal Aarch64 build of Infix, but with Styx additions.
Issue #597
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This intoduce a new sysrepo plugin to handle a new YANG
model 'infix-test'. Today only contains the actions.
This is required to run tests on infix using infamy.
This is a part of #561
Signed-off-by: Mattias Walström <lazzer@gmail.com>
The PAM plugin lastlog, previously used (optional) by Netopeer2 and
Rousette, does not rotate /var/log/lastlog, and since we don't have
cron and logrotate this can potentially fill up /var.
This patch disables pam_lastlog.so from the build and drops the two
matching session lines for both Netopeer2 and Rousette. Both still
log user access to sysrepo, so no critical functionality is lost.
Follow-up to issue #542
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Backport pam-lastlog build fix from latest Buildroot master and enable
in all defconfigs to fix syslog warning:
login[2819]: PAM unable to dlopen(/lib/security/pam_lastlog.so)
Fixes#542
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch allows us to define the rauc manifest compatibility string with
menuconfig. The INFIX_IMAGE_ID is a direct replacement for the previously
composed "infix-$ARCH" in mkrauc.sh.
For example, the compatibility string "infix-aarch64" is replaced for the
NanoPi R2S with "infix-r2s" to ensure users get a proper warning if they
try upgrading to an image that maybe boots, but is not likely to work.
The CLI upgrade command gets a 'force' flag to override the compat string.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch further cleans up the r2s kernel config and also enables the
input event framework for the gpio0 reset button on the device.
The very simple input-event-daemon is introduced, with the only purpose
of listening to /dev/input/event1 for KEY_RESTART and trigger reboot.
Some helpful tooling is also added to help debug events (evtest).
Issue #276
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg