- Bump kernel to 6.12.21, same as other tier one boards
- Fix#1006 byt enabling netlink for ethtool (now works!)
- Sync defconfigs:
- LIBXCRYPT now in an rdep of another package
- Disable FORCE check hashes for now
- Drop patches for 6.10 tree (r2s kernel)
- Port RTL8153b patch for R2S LAN LED support
Fixes#1006
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Updating SSH information
- Adding Web services information (general, RESTCONF and Web Console)
- Adding Console information
Generic info, and some updates w.r.t specific boards (baudrate, etc)
- add default-deny-all rule from 2341e07
- enable iburst for the ntp client (quicker initial sync)
- bump meta version (to skip .cfg migration at boot)
Fix#750 [skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When the interface is up and has a 'proto dhcp' address the WAN LED is
lit up. When the interface goes down, or loses its DHCP lease, the LED
is turned off.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Allow reset button on the R2S to be used for factory reset at power-on.
See board README for details.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch further cleans up the r2s kernel config and also enables the
input event framework for the gpio0 reset button on the device.
The very simple input-event-daemon is introduced, with the only purpose
of listening to /dev/input/event1 for KEY_RESTART and trigger reboot.
Some helpful tooling is also added to help debug events (evtest).
Issue #276
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This serves as an example of how a board specific builds in Infix can
carry a static factory-config. This will be extended upon as we add
support for DHCP server, WiFi access point, and firewall support.
For now the following features are added:
- Default hostname: r2s instead of infix-00-00-00
- LAN port always at 192.168.2.1/24, IPv6 SLAAC enabled
- WAN port has DHCP enabled for IPv4, IPv6 SLAAC disabled
- NTP client enabled, default server pool.ntp.org
- DHCP client is set up to request and allow ntp server
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The R2S has a minimal set of system LEDs, all of which are single color.
This commit tries to distill and map the essence of the Infix functions
to available LEDs.
The SYS LED is turned on (fainy red) at power-on, when U-Boot has loaded
the kernel it turns the SYS LED bright red on. The idea is then to turn
the red SYS LED off as soon as the system has successfully loaded system
startup-config, and then turn the green LAN LED on. Indicating that the
both the device is operational and that the user can connect to the LAN
port.
The WAN LED is given a "wan-up" input condition, with the intention of
turning it on (green) when the device has acquired a DHCP address.
The failure modes, which in many ways is the essence of Infix signaling,
are fail-safe and panic, triggered by loading failure-config, or failing
to loadd failure-config, respectively. In fail-safe mode the SYS LED is
blinking red at 5 Hz and in panic mode *all* LEDs blink at 5 Hz.
Issue #276
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With new features & fixes, Infix grows. With the latest support for
rauc upgrades introduced with the VisionFive2, and now also for R2S,
we need to reserve room for future upgrades even when running from
an SD card.
This is a quick fix for genimge generated SD card imaages before we
get a proper installer in place that can be used both on the target
and host systems to partition and provision an eMMC, NVME, SSD, or
an SD card.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change allows modifying and saving the U-Boot environment to the
aux partition on the NanoPi R2S. Required to able to safely maintain
multiple R2S devices on the same LAN.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Bump kernel to 6.10.3
- Initial defconfig sync with aarch64
- Enable kprobes, ksyms, and function tracer
- Enable missing file systems for parity with Infix
- Enable bridging, netfilter, and other Infix requirements
- Initial virtion support for running in Qemu (untested)
- Enable device mapper, required for rauc bundle install
- Make dummy and tunnel drivers modules to be able to drop dummy0
and tunl0 interfaces that otherwise mess up "show interfaces"
- Disable suspend and hibernation, not supported in Infix
- Disable unused GPIO, PHY, MDIO, and USB drivers
- Disable RK3328 watchdog driver, cannot perform reset on R2S,
enablle softdog instead as a seamless replacement for Infix.
Even though not optimal (since it's software) reboot works
- Disable ethtool netlink support, does not work and breaks
interface configuration completely on R2S!
- Enable netdev LED triggers, for LAN and WAN LEDs
- Bump u-boot to 2024.07
- Hard code developer mode to allow shell access
- Disable factory reset button support (not yet supported)
- Bump ATF to v2.9
- Enable squashfs for rootfs image
- Enable signing of images
- Add secondary partition
- Add dedicated var partition
- Add aux partition for signatures and uboot env
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Since the Nanopi R2S does not have a VPD, we use this mechanism to set
the default admin password. Without one, Infix will refuse to generate
the factory- and failure-config files, and thus refuse to start.
On custom boards in production we have VPD in ONIE format that contains
a per-device unique SHA256 hashed admin user password.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Support for this is based on the upstream Buildroot R2S defconfig and
the myLinux extensions and stripped-down kernel defconfig. For more
information about the Nanopi R2S, see the FriendlyELC wiki at:
https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R2S
Please note, due to the lack of a VPD on the board, and some very poor
devicetree skills by yours truly, Infix currently refuse to boot on this
board. An in-devicetree factory-password-hash node has to be added, and
will be done soon.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
