The rauc event logger is a separate glib logger that by default logs to
the system console, with annoying ANSI escape sequences. This commit
drops the default stdout/stderr redirect of these log messages and adds
a more exhaustive bundle install and event log, in json format, instead.
For more information about event logging, see the rauc documentation:
https://rauc.readthedocs.io/en/latest/advanced.html
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- cli: add '-r' to log/pager/follow for "raw" control chars, including unicode
- sysklogd: backport unicode fix for em-dash character (—) in slogan
- sysklogd: drop old patches
- sysklogd: run in 8-bit safe mode
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Add HISTCONTROL=ignoreboth to ignore duplicate commands and those
starting with space, enable histappend, and improve tab completion
behavior. Also add /etc/inputrc for better readline key bindings.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When a container's image is on an inaccessible remote server, the
container wrapper script waits in the background for any netowrk
changes to retry download of the image.
This change avoids the dangerous previous construct, and is also
easier to read: timeuot after 60 seconds unless ip monitor reads
at least one event before that.
Fixes#1124
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The extended kill delay (10 sec) is sometimes not enough for complex
system containers. Also, podman sometimes take the opportunity to do
housekeeping tasks when stopping a container. So, allow for up to 30
sec. grace period before we send SIGKILL.
With the latest image prune extension, set a 60 sec. timeout for the
cleanup task, in case podman gets stuck. This to prevent any future
mishaps.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
From the documentation:
> 'podman image prune' removes all dangling images from local storage.
> With the all option, all unused images are deleted (i.e., images not
> in use by any container).
>
> The image prune command does not prune cache images that only use
> layers that are necessary for other images.
So, when the container script is called in the cleanup phase of the
lifetime of a container, we can use the '--all' option to ensure we also
remove this container's loaded image. In the case this happens before
a reboot of the system, there will be no old version of the image loaded
to /var/lib/containers after boot.
Issue #1098
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Previously, upgrading Podman containers with the same tag left
behind dangling images, causing overlay storage to grow and fill
disk space.
This change ensures dangling images are cleaned up using
podman image prune. The command is run without -a, so only
unreferenced images are removed. This provides safe cleanup while
preventing unnecessary overlay growth.
Fixes#1098
Signed-off-by: Richard Alpe <richard@bit42.se>
The board/common/uboot/extras.config was updated with CONFIG_MMC_PCI
*after* we last built the SparX5i bootloader, and this was really only
needed for the Qemu build, so let's move the requirement there.
Also, we now (Buildroot 2025.02) need to update the dependencies for the
Fireant bootloader with libbsd (for some reason) and dtc, of course.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This since the feature is called 'wifi' in Infix, this makes the naming
consistent over the system.
Also trigger start of a wpa_supplicant, for scanning in the background.
The scanning results is available operational.
The reason for this is:
1) We want to use the same fetch tool for all operational data, to
avoid having duplicated xpaths scattered across the repo.
2) We want to call this directly from the CLI, which means it need to
be escape safe. A unprivileged user shall be able to use it but not
escape into a shell or do other malicious stuff.
Signed-off-by: Richard Alpe <richard@bit42.se>
There's several reasons for this. The main reason is that it was
developed as an intermediate way of getting system information when
the operational datastore was almost empty. There's not a lot of data
available in the operational datastore and we shall rely on that data
primarily. This command isn't safe to run from a jailed CLI as i
doesn't validate input and run commands directly in the shell, making
it hard to protect against a CLI jail break.
In upcoming patches we will introduce a new show tool that relies
solely on operational data and which sanitize the user input.
Signed-off-by: Richard Alpe <richard@bit42.se>
This silences a bogus warning in the log when runparts is called with no
argument. I.e., when there is no product specific init files available.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When stopping a container that is (stuck) in setup state, e.g., fetching
its container image, we need to send SIGTERM to the container wrapper
script rather than forwarding the 'stop' command to podman.
With this fix, and the Finit upgrade, there is no longer a 10 second
timeout before Finit sends SIGKILL to the PID. Instead, the script now
immediately react to the initial SIGTERM.
Related to issue #980
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Enabled by user enabling IPv6 forwarding on any interface. This change
also enables net.ipv6.conf.all.accept_ra (=2) to accept any IPv6 route
advertisements even when acting as a router.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
For tasks like upgrade we need, e.g., the image URI. Instead of
guessing where on the container command line the image is, use a
meta-data field in the container shell script.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- More logging when deleting a container
- Update 'exec' and 'shell' commands to support running commands
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Containers in Infix are read-only, any persistent data is either stored
in volumes or content mounts. To prevent lingering containers, as have
been seen on some test systems, we move cleanup stage from confd to use
the Finit cleanup:script mechanism.
The resulting code is simpler, shorter, and easier to debug and use.
As an added benefit, confd no longer prunes "unused" volumes by itself
on (any!) reconfiguration event, which with the new container life cycle
in Infix was quite fragile. Instead the CLI command 'container prune'
is extended with 'podman volume prune', which coincidentally the help
text already alluded to.
This patch requires Finit v4.10-rc1, or later.
Fixes#902
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
When updating a container configuration we need to rerun the setup stage
of the container. However, a run/task in Finit only runs once for each
runlevel, meaning changes at runtime of a container was broken.
This is a refactor of the container script to allow it to also run as a
pre:script in the Finit setup stage of a sysv/service. Also included is
a fix to the timeout/retry handling in case the container setup fails.
We must call `read -t 60` *before* calling `ip monitor`, otherwise it
will not be called until `ip monitor` returns.
This patch requires Finit v4.9, or later.
Fixes#930
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Rename local variables
- Extract image name, using basename, for podman image exists
Fixes the following syslog error message:
root@foo:~$ podman image exists docker://ghcr.io/kernelkit/curios:edge
Error: unsupported transport "docker" for looking up local images
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
- Add missing tool: timeout
- Add extra flags to sync
- Allow wc to work with large files
- Update defconfig sync -> enable PAM
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
The speed/duplex of a virtio interface is not eenforced in any way. The
driver initializes them to unknown/unkown:
https://github.com/torvalds/linux/blob/dccbe2047a5b0859de24bf463dae9eeea8e01c1e/drivers/net/virtio_net.c#L5375-L5381
It is however possible to set them since there are kernel subsystems
that rely on them, e.g., miimon in the bond driver, which in turn is
required for use with the 802.3ad (lacp) mode.
If we do not initialize speed/duplex the miimon will complain in the log
on virtual test systems every second:
Dec 13 22:34:08 laggy kernel: lag0: (slave e1): failed to get link speed/duplex
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Pointer authentication emulation is expensive. By default, QEMU use the
standard cryptographic algorithm (QARMA5), which is very time consuming.
This commit switches to the fast implementation.
[skip ci]
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg