This commit implements Infix mDNS TXT records, version 1, for available
services. Hard coded for the moment.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With an increase in requests to confine users to the CLI, access using
SSH/SCP/SFTP to the configuration is becoming more and more important.
The admin role in Infix is mapped to the UNIX group 'wheel', meaning we
want all users in that group to be able to read and write files with
that ownership.
This patch fixes the initial ownership of startup-config, and /cfg, and
ensures the copy command in the CLI retain wheel group permissions.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Both L2 and L3 is supported.
With VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge vlans vlan 1 multicast-filter 224.1.3.4 ports e0
Without VLAN-filtering:
admin@infix-00-00-00:/config/interface/br0/> set bridge multicast-filter 224.1.2.3 ports e0
- Rename mdb -> multicast-filters
- Add support for L2 multicast groups
- Change vlan, multicast and mulitcast-filters containers to presence
containers. This will result in that snooping will be disabled when
creating a bridge (or a vlan if vlan-filtered)
- Force the user to choose between VLANs and Multicast on top level bridge configuration
- Force L2 multicast to be state permanent
On any change to a container network interface we should schedule a
restart of the container to activate the changes. This code triggers
also at boot, when applying the whole startup-config, which initctl
handles by queuing any create/touch events for services.
This patch depends on the two previous commtis backporing fixes to
Finit's initctl tool and an upgrade of the k8s-logger.
Fixes#375
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In 4bfedf7a9 support for disabling IPv6/IPv4 link-local addresses was
added, which in turn caused this regression.
Regression in the v24.03 release cycle, not released -- low severity.
Fixes#353
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This change adds limited support for container capabilities. It allows
a more fine-grained control than priviliged mode does.
Fixes#365
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In a host interface setup, i.e., moving an interface from the host to a
container, often using VETH pairs, any route should only be set when an
IP address has been set. This because the CNI ipam plugin, which we
use, require routes be part of ipam, which in turn requires an address.
For details, see <https://www.cni.dev/plugins/current/ipam/static/>
Fixes#366
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
All querier functionality for IGMP now handled by mcd, even if there are
no VLAN interfaces on top of the bridge. Also, mcd now handles unique
query interval per interface, or per VLAN, so we no longer need multiple
daemons running.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds support for small incremental changes to bridge ports.
Changes where the libyang diff does not include a bridge reference so
that it will have to be synthesized from the current configuration.
For example, forgetting to set a port's PVID in a VLAN filtering bridge
setup, changing a bridge port's multicast flooding properties, or any
other per-bridge-port setting after the fact.
Fixes#349.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Temporary fix to prevent odd log messages. The fix is to add RAW VLAN
support to mcd so it can run as a proxy querier even if there is no
upper VLAN interface or IP address.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds validation of bridge port VLAN memberships and IP
addressing for VLAN filtering bridges:
1. Ports must be a member of this bridge
2. Ports cannot be tagged and untagged member at the same time
3. A VLAN filtering bridge does not support IP addressing
A VLAN filtering bridge can only be a tagged member of a VLAN. Any IP
addressing needs to be done using an upper VLAN interface.
NOTE: while technically possible break up these long must expressions
into multiple must expressions per node (split at 'and'), it will
break libyang in interesting ways that in turn make the confd
inference functionality stop working. E.g., creating VETH pairs.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A bridge port in a VLAN filtering bridge should be possible to configure
as "tagged only", i.e., to not assign ingressing untagged frames a VLAN
and instead drop them.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch fixes a runtime error triggered by modifying an interface
currently used by a container. The CNI code must always return the
CNI status (reserved for container or not).
How to trigger:
- Create veth pair
- Make one end container-network and add to container
- Leave
- Return to configure and set an IP address on container interface
- Leave - BOOM
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Simplify interface generation by collapsing eth_ and ethlike_ifaces to a
single list. Let gen_iface_json() determine interface type by querying
each interface. This allows us to create bridge setups also for qemu
use-cases.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
In a VLAN filtering bridge setup we want to be able to support an
external IGMP/MLD querier running from userspace, because the bridge
multicast code can only generate proxy/NULL querys per VLAN.
This patch is a refactor to allow just that. If a VLAN on the bridge
has an upper interface, matching the bridge name and VID, we generate
a profile for querierd and enable the service.
For all other cases we try to disable any running querierd. It is up
to the daemon to figure out if it has a usable IP address to use as
the query source IP or use 0.0.0.0.
Since the logic for selecting a proper IP address must be handled by
the daemon in the per-VLAN setup, we revert back to also use it for
the stand-alone unfiltered bridge case as well.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
An RFC conforming multicast snooping bridge should forward all unknown
multicast (IP & MAC) on ports where the mcast_flood flag is set. The
upstream kernel does not (yet) support this, but the KernelKit branch
of the kernel and iproute2 now support it.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
A bridge port cannot communicate on layer-3 while acting as a bridge
port. Removing the port from the bridge re-enables the link-local
addresses, if any, from the configuration.
Fix#327
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Note, no VLAN id, or other VLAN specific information is contained in the
MDB entries, only forwarding information and per-port state.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
With VLAN filtering on a bridge we cannot use the mcast_query_use_ifaddr
mechanism. This because even if the bridge may have an address it is
likely not on the same subnet as that of the VLAN, and the multicast
code in the kernel does not look at VLAN interfaecs on top of bridge
for a relevant adddress.
For these cases we have to use querierd, or a multicast router.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
in container: default-route-advertise
Obsolete leaf: enable
Add new leaf: enabled
enable is preferred if exist, else it use enabled.
Also update klish-plugin-sysrepo to not show the obsoleted node
in autocompletion.
This fixes#331
This reverts commit f5e37bba58 because it
causes a regression in setting up VLAN filtering bridges. The bridge
itself, e.g., br0 currently does not have a bridge-port context at the
same time as it being bridge. The model does not account for that and
thus srx_get_int() for the br0 PVID will always fail.
Reverting this commit allows br0 to be tagged member in all VLANs by
default, for now.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Inspired by openconfig-system[1], except the infix-system type is binary
to allow encoding an entire file, with optional control characters.
The openconfig-system model also carries login-banner, which is displayed
before login. This could be added later to infix-system to let the user
set an OpenSSH login Banner.
[1]: https://openconfig.net/projects/models/schemadocs/yangdoc/openconfig-system.html
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This patch adds out-good-octets and in-good-octets as augment in
the infix-ethernet-interface yang model. These counters represents
OctetsTransmittedOK and OctetsReceivedOK from ethtool.
Signed-off-by: Richard Alpe <richard@bit42.se>
Sending SIGTERM to conmon is not a safe shutdown of a podman container.
To handle gracefully handle shutdown, restarting and provide an orderly
start of dependencies, we use the Finit sysv trick via container script
wrapper to call 'podman stop foo'.
However, since podman does not support syslog as output for containers
we employ an old FIFO trick with another program, k8s-logger, to allow
logs to reach syslog. Please note that k8s-logger must have properly
started before we call `podman start` -- this makes us fully dependent
on the 'container' wrapper script. Hence the documentation update.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Joachim Wiberg