A very limited part of the YANG model is implemented so far, basicly it is OSPFv2 with multiple areas and you can change timers
for the interfaces. Limited operational support.
admin@infix-00-00-00:/config/> edit routing control-plane-protocol ietf-ospf:ospfv2 name default
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> set ospf area 0.0.0.0 interface e0 enabled true
admin@infix-00-00-00:/config/routing/control-plane-protocol/ietf-ospf:ospfv2/name/default/> leave
In this patch we add some arbitrary system output files which contains
interface data. Such as the output from "ip link" and "ethtool". These
files are used by yanger instead of running the actual commands.
Yanger then generates a lot of YANG json data, which are merged using
jq into something that looks like the sysrepo operational data on
a running system. This data is then passed though cli-pretty and its
ouput is compared to the static expected output in the .txt files in
cli-output.
Here's a basic flow overview.
* system-output/foo.json -> yanger ->> data
* system-output/bar.json -> yanger ->> data
* data -> merge -> sysrepo-operational-data
* sysrepo-operational-data -> cli-pretty -> output.txt
* compare output.txt too cli-output/show-foobar.txt
The result of this is that if something changes in yanger OR in
cli-pretty. The corresponding system-output file needs to be updated
for the test to pass. This is indented to catch regression where the
output is unintentionally changed.
Signed-off-by: Richard Alpe <richard@bit42.se>
* sniffer did not work correctly
* links did not come upp as quick as in qemu
* must_reach in netns was to narrow, increase timeout
* add wait function to handle poll
This implements the new model infix-if-vlan.
The new CLI is:
root@infix-00-00-00:/config/interfaces/interface/vlan10/> set vlan id 10 lower-layer-if eth0
with an possible extra option for tag-type, default tag-type is c-vlan.
Pretty print all Ethernet frame statistics from the operational
datastore. Only in the detailed interface view.
Signed-off-by: Richard Alpe <richard@bit42.se>
This currently includes cli-pretty tests. It could be executed
separately to clarify test results in github actions. This commit
includes it in the main test execution. The most important thing is
that it's executed.
Signed-off-by: Richard Alpe <richard@bit42.se>
This test is a "unit" test, which implies that it can be executed
locally without access to a Infix target environment.
Signed-off-by: Richard Alpe <richard@bit42.se>
This unfortunately required some restructuring, and as well as extending
the run time since we have no way of sending Ethernet frames currently
in the test framework (socat would be nice).
- Put enable/disable of services before tcpdump start, LLDP lingers ...
- Extend run time: 3 -> 20 sec to catch periodic LLDP messages
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
This test use NETCONF to enable/disable SSDP, it then verifies that the
DUT responds to, or does not respond to, SSDP discover messages.
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Verifies that RAUC bundles can be installed using NETCONF.
We choose to not add this to the "all" suite for now, as the qeneth
topologies do not run with full disk emulation.
To test locally, configure your "make run" instance to use the UEFI
loader, launch `make run`, and then run:
make INFIX_TESTS=test/case/ietf_system/upgrade.py test-run
Launches an interactive ipython environment, attached to Infix nodes.
This can be used as a playground for developing tests, testing out
NETCONF operations, etc.
